ethOamSvcIntervalNearEndFrameLossRatio

RAD-OamCfm-MIB · .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.29
MIB view Table view

Object

column PerfHist-TC-MIBPerfIntervalCount 
Object reflecting the percentage lost frames at the near end direction.
Equals to (near End frame loss / Tx frame count in the forward direction)
in the current interval.

Context

MIB
RAD-OamCfm-MIB
OID
.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.29
Type
column
Access
readonly
Status
current
Parent
ethOamSvcIntervalEntry
Table
ethOamSvcIntervalTable
Siblings
40

Syntax

PerfHist-TC-MIBPerfIntervalCount
Source
PerfHist-TC-MIBPerfIntervalCount
Base type
Unsigned32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ethOamSvcIntervalNum
The Interval index, which is actualy the Interval number, where 1 is the most recently completed 15 minute interval, and 96 is the least recently completed 15 minutes interval (…
columnInteger32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.1
ethOamSvcIntervalAvgRoundTripDelay
The average round trip delay in the selected interval.
columnmicroseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.10
ethOamSvcIntervalMaxRoundTripDVar
The maximum value of round trip delay variation in the selected interval.
columnmicroseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.11
ethOamSvcIntervalAvgRoundTripDVar
The average round trip delay variation in the selected interval.
columnmicroseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.12
ethOamSvcIntervalUnavailSec
The number of seconds that the service was unavailable in the selected interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.13
ethOamSvcIntervalLmmTxFrames
Number of transmitted LMM frames in the selected interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.14
ethOamSvcIntervalDmmTxFrames
Number of transmitted DMM frames in the selected interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.16
ethOamSvcIntervalLmrRxFrames
Number of received LMR frames in the selected interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.19
ethOamSvcIntervalFramesAboveDelayThresh
Number of frames that arrived in a delay greater than the threshold value defined for the service in the selected interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.2
ethOamSvcIntervalDmrRxFrames
Number of received DMR frames in the selected interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.21
ethOamSvcIntervalNearEndFramesLossCounter
The number of lost frames at the near end in the selected interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.22
ethOamSvcIntervalTxFramesForward
The number of transmitted frames in the forward direction in the selected interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.23
ethOamSvcIntervalRxFramesForward
The number of received frames in the forward direction in the selected interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.24
ethOamSvcIntervalTxFramesBackward
The number of transmitted frames in the backward direction in the selected interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.25
ethOamSvcIntervalRxFramesBackward
The number of received frames in the backward direction in the selected interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.26
ethOamSvcIntervalUnavailableIndForward
Counter reflecting the number of unavailability indicators evaluated as unavailable in the forward direction in the selected interval.
columnseconds PerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.27
ethOamSvcIntervalUnavailableIndBackward
Counter reflecting the number of unavailability indicators evaluated as unavailable in the backward direction in the selected interval.
columnseconds PerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.28
ethOamSvcIntervalFramesBelowDelayThresh
Number of frames that arrived in a delay lower than the threshold value defined for the service in the selected interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.3
ethOamSvcIntervalFarEndFrameLossRatio
Object reflecting the percentage lost frames at the far end direction. Equals to (Far End frame loss / Tx frame count in the forward direction) in the current interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.30
ethOamSvcIntervalValidData
This object indicates if the data for this interval is valid.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.31
ethOamSvcIntervalDuration
The Object presents duration of a particular interval in seconds. The partial second is counted.
columnInteger32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.32
ethOamSvcIntervalTimeStamp
The Object presents date and time of start of Interval. Time zone octets are not used (OCTET STRING (SIZE (8)).
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.33
ethOamSvcIntervalMinRoundTripDVar
The minimal value of round trip delay variation in the selected interval.
columnmicroseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.34
ethOamSvcIntervalMinForwardDelay
The minimal value of one way (forward 1DM) delay variation in the selected interval.
columnmicroseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.35
ethOamSvcIntervalMaxForwardDelay
The maximum value of one way (forward 1DM) delay variation in the selected interval.
columnmicroseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.36
ethOamSvcIntervalAvgForwardDelay
The average value of one way (forward 1DM) delay variation in the selected interval.
columnmicroseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.37
ethOamSvcIntervalMinForwardDVar
The minimal value of one way forward delay variation in the selected interval.
columnmicroseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.38
ethOamSvcIntervalMaxForwardDVar
The maximum value of one way forward delay variation in the selected interval.
columnmicroseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.39
ethOamSvcIntervalFramesAboveDVarThresh
Number of frames that arrived in a delay variation greater than the threshold value defined for the service in the selected interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.4
ethOamSvcIntervalAvgForwardDVar
The average value of one way forward delay variation in the selected interval.
columnmicroseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.40
ethOamSvcIntervalMinBackwardDVar
The minimal value of one way backward delay variation in the selected interval.
columnmicroseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.41
ethOamSvcIntervalMaxBackwardDVar
The maximum value of one way backward delay variation in the selected interval.
columnmicroseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.42
ethOamSvcIntervalAvgBackwardDVar
The average value of one way backward delay variation in the selected interval.
columnmicroseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.43
ethOamSvcIntervalAvailableIndForward
Counter reflecting the number of availability indicators evaluated as available in the forward direction in the selected interval.
columnseconds PerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.44
ethOamSvcIntervalAvailableIndBackward
Counter reflecting the number of availability indicators evaluated as available in the backward direction in the selected interval.
columnseconds PerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.45
ethOamSvcIntervalFramesBelowDVarThresh
Number of frames that arrived in a delay variation lower than the threshold value defined for the service in the selected interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.5
ethOamSvcIntervalFramesTxCounter
Number of trnasmitted frames in the selected interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.6
ethOamSvcIntervalFarEndFramesLossCounter
The number of lost frames at the far end in the selected interval.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.7
ethOamSvcIntervalMinRoundTripDelay
The mininal value of round trip delay in the selected interval.
columnmicroseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.8
ethOamSvcIntervalMaxRoundTripDelay
The maximum value of round trip delay in the selected interval.
columnmicroseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.9