dot1agXCfmMepDefects

RAD-OamCfm-MIB · .1.3.6.1.4.1.164.3.1.6.1.3.9.1.16
MIB view Table view

Object

column r/w Bits 
An extnetion to dot1agCfmMepDefects which is A vector of
Boolean error conditions, any of which may be true.
A MEP can detect and report a number of defects,
and multiple defects can be present at the same time.
 The following defects are indicated by this object.
Defect are ordered according to their severity.
              
bDefAIS - an AIS was received by this MEP in the last
3.5*AIS-interval, meaning some server MEP is reporting an AIS.
              
bDefLCK - An LCK was received by this MEP in the last
3.5*AIS-interval, meaning some server MEP is performing a test.

Context

MIB
RAD-OamCfm-MIB
OID
.1.3.6.1.4.1.164.3.1.6.1.3.9.1.16
Type
column
Access
readwrite
Status
current
Parent
dot1agXCfmMepEntry
Table
dot1agXCfmMepTable
Siblings
24

Syntax

Bits

Values & Constraints

Enumerated Values
0bDefAIS
1bDefLCK

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dot1agXCfmMepContinuityVerMode
This object determines the OAM behavior of the MEP: disabled - no Continuity Verification is done cc_based - Continuity Verification is done based on incoming CC messages lb_based…
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.9.1.1
dot1agXCfmMepForwardingMode
This variable denotes the mode MEP forwarding mode. If set to elan(2) mode, dot1agXCfmMepPmDestAddrType must be unicast(1).
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.9.1.10
dot1agXCfmMepLbmDataTlvLength
This variable denotes the length of the data TLV sent in LBM.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.9.1.11
dot1agXCfmMepClientMdLevel
This variable denotes the client MD level to transmit ETH-AIS and LCK frames. It is irrelevant if the corresponding dot1agCfmMdMdLevel equals to 7. Otherwise, it value must be gre…
columnUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.9.1.12
dot1agXCfmMepAisTransmit
This variable denotes if ETH-AIS frame transmission is enabled or not. It can be enabled only if the value of the corresponding dot1agCfmMdMdLevel is less than 7
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.9.1.13
dot1agXCfmMepAisInterval
This variable denotes the interval of ETH-AIS frame transmission.
columnIEEE8021-CFM-MIBDot1agCfmCcmInterval.1.3.6.1.4.1.164.3.1.6.1.3.9.1.14
dot1agXCfmMepAisPriority
This variable denotes the priority of ETH-AIS frames.
columnUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.9.1.15
dot1agXCfmMepLastAlarmDefect
This object indicates the last defect that generated an alarm at the MEP: none no defects since FNG_RESET defRDICCM RDI CCM defMACstatus MAC status defRemoteCCM…
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.9.1.17
dot1agXCfmMepCosMapping
This attribute defines MEP CoS mapping. The value 0..7 indicates fixed CoS selection. The value 255 defines using of dot1agXCfmMepCosMappingProfile OBJECT belonging to this table …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.9.1.19
dot1agXCfmMepDestAddrType
This object determines if the OAM messages are sent to user defined unicast address, or to RAD proprietary multicast address.
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.9.1.2
dot1agXCfmMepCosMappingProfile
This attribute contains cosInternalProfileIndex that defines CoS mapping profile assigned to this MEP, see cosInternalProfileTable.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.9.1.20
dot1agXCfmMepCcStatus
This obejct indicates the Continuity Check status. If no bit is set then it means that the ststus is ok. If notApplicable (0) is set then the other bits should not be set. If othe…
columnBits.1.3.6.1.4.1.164.3.1.6.1.3.9.1.24
dot1agXCfmMepStatus
This objects indicates the test status of the MEP.
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.9.1.28
dot1agXCfmMepExcludeCustomerTags
This objects denotes whether the tag structure of transmitted OAM frames includes or excludes the customer tags (C-tags). A value of true(1) forbids C-tags on OAM f…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.164.3.1.6.1.3.9.1.29
dot1agXCfmMepDestMacAddr
This object determines the MAC address that OAM packets are sent to.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.164.3.1.6.1.3.9.1.3
dot1agXCfmMepClearStatsCmd
A command that instructs the agent to clear running statistics of selected MEP. Setting this object to on(3), shall clear the MEP statistics. Upon completion, the value shall au…
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.9.1.30
dot1agXCfmMepTimeElapsed
The number of seconds that have elapsed since the beginning of the current statistics interval of the MEPs (local and remote). (Time elapsed is common to MEP current interval sta…
columnUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.9.1.31
dot1agXCfmMepCcmTx
Total number of CCM PDUs transmitted by the MEP
columnSNMPv2-SMICounter64.1.3.6.1.4.1.164.3.1.6.1.3.9.1.32
dot1agXCfmMepMappingProfile
This attribute defines the Mapping/classification profile (flowMappingProfileTable ) assigned to this MEP.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.9.1.4
dot1agXCfmMepQBlock
This attribute defines the QBlock assigned to this MEP.
columnObjectIdentifier.1.3.6.1.4.1.164.3.1.6.1.3.9.1.5
dot1agXCfmMepFixedQueueMapping
This attribute defines the queue (cosProfileTable) that will be assigned to the MEP. A value of 255 means that the Mep will use the profile according to dot1agXCfmMepQueueMappingP…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.9.1.6
dot1agXCfmMepQueueMappingProfile
This attribute defines the queueMapping Profile (CosProfileTable) assigned to this MEP.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.9.1.7
dot1agXCfmMepConvertedIndex
This attribute defines the converted index (according to entityConvertIndexTable ) assigned to this MEP.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.6.1.3.9.1.8
dot1agXCfmMepPmDestAddrType
This object defines the type of MAC Address being used by the PM frames (Delay Measurement frames and Loss Measurement frames).
columnEnumeration.1.3.6.1.4.1.164.3.1.6.1.3.9.1.9