ethOamServicePmEnable
RAD-OamCfm-MIB ·
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.4
Object
column
r/w
Enumeration
This object determines PM (Performance Monitoring) shall be enabled or not for the service. Setting the object to disable(2) will stop the PM activity of all Destination NEs of this service.
Context
- MIB
- RAD-OamCfm-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ethOamServiceEntry
- Table
- ethOamServiceTable
- Siblings
- 44
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | disable |
3 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ethOamServiceIdx This object indicates the Index of the service being accessed. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.1 |
| ethOamServiceOverflowTxFrames The number of times the associated
ethOamServiceTxFrames counter has overflowed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.10 |
| ethOamServiceFarEndFrameLoss Counts the number of frames lost at the far end
since the time the service is up. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.11 |
| ethOamServiceOverflowFarEndFrameLoss The number of times the associated
ethOamServiceFarEndFrameLoss counter has overflowed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.12 |
| ethOamServiceFarEndFrameLossRatio Indicates the ratio of the lost frames at the far end
since the time the service is up.
The value is the ratio multiplied by 1E10.
0xFFFFFFFF will be returned for ratio greater th… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.13 |
| ethOamServiceElapsedTime Indicates the time elapsed in seconds since the time the service is up. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.14 |
| ethOamServiceUnavailSec Indicates the number of unavailable seconds since
the time the service is up. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.15 |
| ethOamServiceUnavailRatio Indicates the ratio of the unavailable seconds since the
time the service is up. The value is the ratio multiplied by 1E10.
0xFFFFFFFF will be returned for ratio greater than 4/1… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.16 |
| ethOamServiceFramesAboveDelay Indicates the number of frames arrived with delay
greater than the delay threshold. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.17 |
| ethOamServiceOverflowFramesAboveDelay Indicates the number of times the associated
ethOamServiceFramesAboveDelay counter has overflowed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.18 |
| ethOamServiceFramesAboveDelayVar Indicates the number of frames arrived with delay variation
greater than the delay variation threshold. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.19 |
| ethOamServiceRowStatus This attribute allows to create/delete a row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.2 |
| ethOamServiceOverflowFramesAboveDelayVar Indicates the number of times the associated
ethOamServiceFramesAboveDelayVar counter has overflowed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.20 |
| ethOamServiceCurrentDelay Indicates the last measured delay sample. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.21 |
| ethOamServiceCurrentDelayVariation Indicates the last measured delay variation sample. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.22 |
| ethOamServiceResetCounters Reset all PM counters of the selected service. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.23 |
| ethOamServiceNearEndFrameLoss Counts the number of frames lost at the near end
since the time the service is up. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.25 |
| ethOamServiceOverflowNearEndFrameLoss The number of times the associated
ethOamServiceNearEndFrameLoss counter has overflowed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.26 |
| ethOamServiceNearEndFrameLossRatio Indicates the ratio of the lost frames at the near end
since the time the service is up.
The value is the ratio multiplied by 1E10.
0xFFFFFFFF will be returned for ratio greater t… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.27 |
| ethOamServiceDmmInterval Indicates the interval between DMM transmissions.
This value is used by all Destination NEs defined on a Service. | column | IEEE8021-CFM-MIBDot1agCfmCcmInterval | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.28 |
| ethOamServiceLmmInterval Indicates the interval between PM transmissions:
DMM and LMM in Phase 2, LMM only in Phase 3.
This value is used by all Destination NEs defined on a Service. | column | IEEE8021-CFM-MIBDot1agCfmCcmInterval | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.29 |
| ethOamServicePriority This object determines the priority of the service.
It is sent as P bits in an OAM message originated by this service. | column | Unsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.3 |
| ethOamServiceTxLmm | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.30 |
| ethOamServiceOverflowTxLmm | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.31 |
| ethOamServiceTxDmm | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.32 |
| ethOamServiceOverflowTxDmm | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.33 |
| ethOamServiceRxLmr Counts the number of LMR frames received since the time
the service is up, or since last counters reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.34 |
| ethOamServiceOverflowRxLmr The number of times the associated
ethOamDestNeRxLmr counter has overflowed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.35 |
| ethOamServiceRxDmr Counts the number of DMR frames received since the time
the service is up, or since last counters reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.36 |
| ethOamServiceOverflowRxDmr The number of times the associated
ethOamDestNeRxDmr counter has overflowed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.37 |
| ethOamServiceTxForward Counts the number of transmitted frames in the forward direction
since the time the service is up, or since last counters reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.38 |
| ethOamServiceOverflowTxForward Indicates the number of times the associated
ethOamDestNeTxForward counter has overflowed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.39 |
| ethOamServiceRxForward Counts the number of received frames in the forward direction
since the time the service is up, or since last counters reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.40 |
| ethOamServiceOverflowRxForward Indicates the number of times the associated
ethOamDestNeRxForward counter has overflowed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.41 |
| ethOamServiceTxBackward Counts the number of transmitted frames in the backward direction
since the time the service is up, or since last counters reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.42 |
| ethOamServiceOverflowTxBackward Indicates the number of times the associated
ethOamDestNeTxBackward counter has overflowed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.43 |
| ethOamServiceRxBackward Counts the number received frames in the backward direction
since the time the service is up, or since last counters reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.44 |
| ethOamServiceOverflowRxBackward Indicates the number of times the associated
ethOamDestNeTxBackward counter has overflowed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.45 |
| ethOamServiceConvertedIndex This attribute defines the converted index (according to entityConvertIndexTable )
assigned to this Service. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.46 |
| ethOamServiceFrameLossRatioThresh This object determines the Frame Loss ratio threshold in exponent
of 1/10. That is, a value of 4 means that the threshold is 1E-4. | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.5 |
| ethOamServiceDelayThresh This object determines the delay threshold defined for this service,
in measurement unit of 0.1 milliseconds (100 x usec). | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.6 |
| ethOamServiceDelayVarThresh This object determines the delay-variation threshold defined for this service,
in measurement unit of 0.1 milliseconds (100 x usec). | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.7 |
| ethOamServiceUnavailRatioThresh This object determines the Unavailability ratio threshold in exponent
of 1/10. That is, a value of 4 means that the threshold is 1E-4. | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.8 |
| ethOamServiceTxFrames Counts the number of frames trnasmitted by since the time the service is up. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.9 |