OMNITRON-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
10
Rows
10
Columns
270
chassisTable
table.1.3.6.1.4.1.7342.1.1
·
1 row entry
·
21 columns
This a table of chassis and their modules.
Chassis modules.
Indexes
chassisnum slotnum
| Column | Syntax | OID |
|---|---|---|
|
chassisnum
The chassis where the module resides. Ranges in value from 1 - 19.
|
Integer32 Constraints: range: 1-19 |
.1.3.6.1.4.1.7342.1.1.1.1 |
|
slotnum
The slot number of the module.
For the 19 slot chassis it ranges in value from 1-22. For the 2 slot chassis it ranges in value from 1-2. |
Integer32 Constraints: range: 1-22 |
.1.3.6.1.4.1.7342.1.1.1.2 |
|
chassistype
Type of chassis:
1 = 19 module chassis 2 = 2 module chassis 3 = 5 module chassis 4 = 1 module chassis 5 = stand alone chassis 6 = 1-module redundant power chassis |
Integer32 Constraints: range: 1-6 |
.1.3.6.1.4.1.7342.1.1.1.3 |
|
prodtype
The product type of the module:
61 = iConverter NMM 64 = iConverter Power Supply (19 Module) 65 = iConverter 10FL/T Ethernet 66 = iConverter 100 Fx/Tx Ethernet 67 = iConverter Fiber/Fiber 68 = iConverter 10/100 Ethernet… |
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.7342.1.1.1.4 |
|
chassisname
The name of the chassis that is used to set and get names from
other modules in the chassis. |
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.7342.1.1.1.5 |
|
partnum
The part number of the module.
|
OctetString Constraints: range: 0-8 |
.1.3.6.1.4.1.7342.1.1.1.6 |
|
serialnum
The serial number of the module.
|
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.7342.1.1.1.7 |
|
manufdate
The date the module was manufactured in form YYYYMMDD.
|
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.7342.1.1.1.8 |
|
softrev
The software revision of the module software.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.7342.1.1.1.9 |
|
prodrev
The product revision of the module.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.7342.1.1.1.10 |
|
ledstat
The status of any first 32 LEDs on the module, excluding the power LED.
If an LED is missing its number is skipped. For an eight LED position device the following is the decoding: ledstat.7 is the top LED… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.1.1.1.11 |
|
switchstat
The status of any DIP switches on the module.
DIP switch 1 is switchstat.0, DIP switch 2 is switchstat.1, DIP switch 3 is switchstat.2, etc. DIP switch bank 1 is switches 0-7 DIP switch bank 2 is switches… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.1.1.1.12 |
|
extended1
General extended status for the module. Normally this is the
actual setting of the DIP switch selection. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.1.1.1.13 |
|
extended2
General extended status for the module
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.1.1.1.14 |
|
extended3
General extended status for the module
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.1.1.1.15 |
|
extended4
General extended status for the module
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.1.1.1.16 |
|
extended5
General extended status for the module
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.1.1.1.17 |
|
extended6
General extended status for the module
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.1.1.1.18 |
|
resetmod
Writing to this variable resets the module. This variable is a write only.
Writing a zero (0) will reboot to the current working application image Writing a one (1) will reboot to the back… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.1.1.1.19 |
|
wrswitch
Writing to this variable updates the module switch settings.
See switchstat above for the explanation. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.1.1.1.20 |
|
modulename
The name of the module
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.7342.1.1.1.21 |
moduleTable
table.1.3.6.1.4.1.7342.2.1.2
·
1 row entry
·
35 columns
This a table of modules in the enhances chassis table. It contains as many entries as specified by moduleCount
Chassis modules.
Indexes
modchassnum modslotnum
| Column | Syntax | OID |
|---|---|---|
|
modchassnum
The chassis where the module resides.
|
Integer32 Constraints: range: 1-19 |
.1.3.6.1.4.1.7342.2.1.2.1.1 |
|
modslotnum
The slot number within a chassis.
|
Integer32 Constraints: range: 1-22 |
.1.3.6.1.4.1.7342.2.1.2.1.2 |
|
modchasstype
The type of chassis in which the module resides.
|
Integer32 Constraints: range: 1-6 |
.1.3.6.1.4.1.7342.2.1.2.1.3 |
|
modprodtype
The chassis where the module resides.
|
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.7342.2.1.2.1.4 |
|
modsoftrev
The modules software revision.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.2.1.5 |
|
modprodrev
The modules product revision.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.2.1.6 |
|
modreset
Writing to this variable resets the module. This variable is a write only.
Writing a zero (0) will reboot to the current working application image Writing a one (1) will reboot to the back… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.2.1.7 |
|
modnumports
The number of ports in this module.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.2.1.8 |
|
modchassname
The name of the chassis in which the individual module resides in.
For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 64 octets when a module is accessed di… |
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.7342.2.1.2.1.9 |
|
modpartnum
The model of the individual module.
|
OctetString Constraints: range: 1-8 |
.1.3.6.1.4.1.7342.2.1.2.1.10 |
|
modserialnum
The serial number of the individual module.
|
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.7342.2.1.2.1.11 |
|
modmanufdate
The manufacturing date of the individual module.
|
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.7342.2.1.2.1.12 |
|
modname
The name of the individual module.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.7342.2.1.2.1.13 |
|
modportvlan
The portvlan map of an individual module. The low order bits encode the possible values.
The following are the connection paths that exists between the ports on the module: Used on types 69, 72, 81, 83, 84, 86 … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.2.1.14 |
|
modextfeaturebits
The module's extended features bits.
The bit definitions are: bit0 - module is capable of being field upgradeable bit1 - module supports MIB Statistics bit2 - module supports Memory I/O extended registers bit3 - module … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.2.1.15 |
|
modswbuildnum
The module's software build number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.2.1.16 |
|
modenable802dot1qProcessing
Enables or disables 802_1q processing.
0 = disable 1 = enable |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.2.1.17 |
|
modtagsubstitution
Enables or disables substitution of 802_1q tags.
Currently not implemented by any supported module |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.2.1.18 |
|
modcommitVLANchanges
VLAN information is applied to the module and data saved
to persistent storage. This variable is a write only. |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.2.1.19 |
|
modvlanTableClear
VLAN table for the module Vlan table to be cleared. This variable is a write only.
|
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.2.1.20 |
|
modcommitNMMCfgChanges
Management module configuration information is applied to the module and data saved
to persistent storage. This variable is a write only. |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.2.1.21 |
|
modLM80volts
8 bits each of PS1 Voltage(msB), PS2 Voltage, Total Voltage and an unused byte(lsB).
1-module redundant power chassis. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.2.1.22 |
|
modLM80currents
8 bits each of PS1 Current(msB) (mA/10), PS2 Current, Total Current and an
unused byte(lsB). 1-module redundant power chassis. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.2.1.23 |
|
modLM80misc
8 bits each of Temperature(msB) .5C/bit and 2 unused byte(lsB). 1-module redundant power chassis.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.2.1.24 |
|
modRestoreFactoryDefaults
Management module configuration information is restored to factory
defaults. This variable is a write only. Different types of restore defaults are supported: restoreFactoryDefaults(0,1) Restores fac… |
Integer32r/w Constraints: range: 0-6 |
.1.3.6.1.4.1.7342.2.1.2.1.25 |
|
coreStatusOnly
Enable(1) or disable(0) Core Status Only.
|
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.2.1.26 |
|
ingressPolicingType
Sets the module global policy used to count bytes for bandwidth
calculation purposes. This is available on the GM3 & GM4. This is not available on the XM5. 1 = L1 includes all bytes in frame, interframe g… |
Integer32r/w Constraints: range: 1-3 |
.1.3.6.1.4.1.7342.2.1.2.1.27 |
|
vlanservicetag
Value for service tag.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.2.1.28 |
|
defaultForwardingMap
Bit vector for default forwarding map where:
bit0 - Port 1 bit1 - Port 2 bit2 - Port 3 bit3 - Port 4 bit4 - Port BPA bit5 - Port BPB |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.2.1.29 |
|
modFpgaRev
The current revision of the FPGA.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.7342.2.1.2.1.30 |
|
modExpPartNumber
The expanded part number of the individual module.
The modpartnum object indicates the compressed version of the part number name. If this field is not supported in a module it is left as a null length st… |
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.7342.2.1.2.1.31 |
|
modExpSoftwareRev
The expanded software revision of the individual module.
This object allows for an enhanced version of the software revision that include a major and minor component. Major and Minor are always numeric va… |
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.7342.2.1.2.1.32 |
|
modExpLedStatus
This object is the expanded LED status of the individual module. This
object reflects the state, color, and blinking rate of each individual LED. Each LED is represented by a single octet. The first octet… |
OctetString | .1.3.6.1.4.1.7342.2.1.2.1.33 |
|
modHwRev
The current hardware revision of the module.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.7342.2.1.2.1.34 |
|
modPcbRev
The current PCB revision of the module.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.7342.2.1.2.1.35 |
moduleMgtCfgTable
table.1.3.6.1.4.1.7342.2.1.3
·
1 row entry
·
70 columns
This is a table of the management module configuration variables.
Chassis modules.
Indexes
modchassnum modslotnum
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sysAdminStatus
This variable provides the status for a management module's ability to make
changes to the system. In backplane slave, a management module cannot make system modification. Modifications must be performed from a managem… |
Integer32 Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.3.1.1 |
||||||||||
|
sysDateTime
This variable provides the date and time in display format:
nn/dd/yyyy hh:mm:ss where nn = 2 digit month, dd = 2 digit day, yyyy = 4 digit year hh - 2 digit hour 0-23, mm = 2 digit minutes 0-59, ss = 2 digit secs … |
OctetStringr/w Constraints: range: 19-19 |
.1.3.6.1.4.1.7342.2.1.3.1.2 |
||||||||||
|
macAddr
MAC address of the management module
|
OctetString Constraints: range: 17-17 |
.1.3.6.1.4.1.7342.2.1.3.1.3 |
||||||||||
|
ipAddr
Management address 1 IPv4 address
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.4 |
||||||||||
|
subnetmask
Management address 1 IPv4 subnet mask
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.5 |
||||||||||
|
gateway
Management address 1 IPv4 gateway address
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.6 |
||||||||||
|
readCommunity
SNMPv1/v2c read community name.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.7342.2.1.3.1.7 |
||||||||||
|
writeCommunity
SNMPv1/v2c write community name.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.7342.2.1.3.1.8 |
||||||||||
|
mychassnum
NMMs chassis number.
|
Integer32r/w Constraints: range: 1-19 |
.1.3.6.1.4.1.7342.2.1.3.1.9 |
||||||||||
|
mmname
Management Modules chassis name.
For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 255 octets when a module is accessed directly through the serial port, o… |
OctetStringr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.7342.2.1.3.1.10 |
||||||||||
|
traphost1
This object is the trap host 1 IPv4 address.
Setting this object also impacts the equivalent ostIpTraphostCfgTable returned value. If an IPv4 address is written to this object the two objects return th… |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.11 |
||||||||||
|
traphost2
This object is the trap host 2 IPv4 address.
Setting this object also impacts the equivalent ostIpTraphostCfgTable returned value. If an IPv4 address is written to this object the two objects return th… |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.12 |
||||||||||
|
traphost3
This object is the trap host 3 IPv4 address.
Setting this object also impacts the equivalent ostIpTraphostCfgTable returned value. If an IPv4 address is written to this object the two objects return th… |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.13 |
||||||||||
|
traphost4
This object is the trap host 4 IPv4 address.
Setting this object also impacts the equivalent ostIpTraphostCfgTable returned value. If an IPv4 address is written to this object the two objects return th… |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.14 |
||||||||||
|
traphost5
This object is the trap host 5 IPv4 address.
Setting this object also impacts the equivalent ostIpTraphostCfgTable returned value. If an IPv4 address is written to this object the two objects return th… |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.15 |
||||||||||
|
traphost6
This object is the trap host 6 IPv4 address.
Setting this object also impacts the equivalent ostIpTraphostCfgTable returned value. If an IPv4 address is written to this object the two objects return th… |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.16 |
||||||||||
|
traphost7
This object is the trap host 7 IPv4 address.
Setting this object also impacts the equivalent ostIpTraphostCfgTable returned value. If an IPv4 address is written to this object the two objects return th… |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.17 |
||||||||||
|
traphost8
This object is the trap host 8 IPv4 address.
Setting this object also impacts the equivalent ostIpTraphostCfgTable returned value. If an IPv4 address is written to this object the two objects return th… |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.18 |
||||||||||
|
sysloc
Management Modules system location.
For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 64 octets when a module is accessed directly through the serial port,… |
OctetStringr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.7342.2.1.3.1.19 |
||||||||||
|
syscon
Management Modules system Contact information.
For the M2 modules the max size is 32 octets. For the GM3, GM4, XM5 the max size is 64 octets when a module is accessed directly through the s… |
OctetStringr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.7342.2.1.3.1.20 |
||||||||||
|
serialpass
Serial interfacce password for M2 and M3 modules
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.7342.2.1.3.1.21 |
||||||||||
|
telnetpass
Telnet and SSH plain text password for the M2 and M3 modules
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.7342.2.1.3.1.22 |
||||||||||
|
ftppasswrd
FTP password for the M2 and M3 modules
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.7342.2.1.3.1.23 |
||||||||||
|
keepAliveInterval
This the interval used by the NMM to send out keep alive traps.
|
Integer32r/w Constraints: range: 10-600 |
.1.3.6.1.4.1.7342.2.1.3.1.24 |
||||||||||
|
vlanIdOst
Management module VLAN tagged packet ID.
|
OMNITRON-TC-MIBOstVlanIdr/w Textual Convention: OMNITRON-TC-MIBOstVlanId Integer32Type Constraints: range: 0..4095 |
.1.3.6.1.4.1.7342.2.1.3.1.25 |
||||||||||
|
nmmCfgSerialBaudrate
This variable defines the baud rate for the serial interface to the NMM.
Where: 1 = 300 bps 2 = 1200 bps 3 = 2400 bps 4 = 4800 bps 5 = 9600 bps 6 = 19200 bps 7 = 38400 bps 8 = 57600 bps 9 = 115200 bps |
Integer32r/w Constraints: range: 1-9 |
.1.3.6.1.4.1.7342.2.1.3.1.26 |
||||||||||
|
enabledFunctions
This variable defines which special functions are enabled at the NMM.
Where: 0x01 = Keep Alive trap enabled 0x02 = Telnet enabled 0x04 = FTP enabled 0x08 = switch reload enabled 0x10 = VLAN enabled 0x2… |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.7342.2.1.3.1.27 |
||||||||||
|
enableSNMPFunction
This variable defines whether the SNMP Agent is enabled at the NMM.
Where: 00 = SNMP disabled 01 = SNMP enabled |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.3.1.28 |
||||||||||
|
nmmCfgState
This variable defines the state of the configuration changes made to the NMM.
Where: 0x00 = No changes 0x02 = Changes Pending (not saved in Flash) 0x04 = Saved in Flash, Pending NMM reboot |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.3.1.29 |
||||||||||
|
nmmSecureMode
This variable defines the mode the Management module will operate in when configured for SECURE COMMUNICATIONS.
Where: 0x00 = No Secure Communications 0x01 = Secure Proxy 0x02 = Secure Slave 0x03 = Secure Master |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.7342.2.1.3.1.30 |
||||||||||
|
nmmSecureConnState
This variable returns the secure connection state between the proxy and secure slave.
Where: 0x00 = Not connected 0x01 = Connection Pending 0x02 = Connection established 0x03 = Connection terminating |
Integer32 Constraints: range: 0-3 |
.1.3.6.1.4.1.7342.2.1.3.1.31 |
||||||||||
|
nmmIpProtocolState
This variable defines whether the IP protocol is active or disabled.
0 = Active 1 = Disabled |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.7342.2.1.3.1.32 |
||||||||||
|
nmmIpDisabled
This variable defines the configuration value for IP protocol's desired state.
0 = ipActive 1 = ipDisabled |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.3.1.33 |
||||||||||
|
vlanPri
Management module VLAN tagged packet priority.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.7342.2.1.3.1.34 |
||||||||||
|
enableSNMPWrites
Permit SNMP SET operations.
|
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.3.1.35 |
||||||||||
|
cpuVoltageIn
voltage input to cpu.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.3.1.36 |
||||||||||
|
cpuVoltageOut
Voltage out from the cpu.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.3.1.37 |
||||||||||
|
cpuTemperature
The ambient temperature of the CPU.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.3.1.38 |
||||||||||
|
nmmSecureSlaveSlot
The slot number of the secure slave in the remote chassis when
configured for SECURE COMMUNICATIONS. |
Integer32 Constraints: range: 0-19 |
.1.3.6.1.4.1.7342.2.1.3.1.39 |
||||||||||
|
dhcpIpAddr
This object is the IPv4 address as returned by the DHCP server
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.40 |
||||||||||
|
dhcpSubnetmask
This object is the IPv4 subnet mask as returned by the DHCP server
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.41 |
||||||||||
|
dhcpGateway
This object is theIPv4 gateway address as returned by the DHCP server
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.42 |
||||||||||
|
nmmOAMmgmtMode
This variable configures the protocol the Management module will use to communicate
with remote chassis when operating in secure mode. Where: 0x01 = (OAM_OFF) No Secure Communications protocol 0x02 = (Auto S… |
Integer32r/w Constraints: range: 1-5 |
.1.3.6.1.4.1.7342.2.1.3.1.43 |
||||||||||
|
customertag
Value for customer tag.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.7342.2.1.3.1.44 |
||||||||||
|
servicetag
Value for service tag.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.7342.2.1.3.1.45 |
||||||||||
|
cnodeControl
Controls whether the module is operating as a Cnode.
|
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.3.1.46 |
||||||||||
|
cnodeCIR
Cnode CIR
Where: 1 = 64 Kbps 2 = 128 Kbps 3 = 192 Kbps |
Integer32r/w Constraints: range: 1-3 |
.1.3.6.1.4.1.7342.2.1.3.1.47 |
||||||||||
|
enableSNMPv3Function
This variable defines whether the SNMPv3 Agent is enabled at the NMM.
Where: 00 = SNMP disabled 01 = SNMP enabled |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.3.1.48 |
||||||||||
|
slaveWrite
This variable defines whether the module should be allowed to make
configurations to itself when in the chassis slave mode. Where: 00 = slaveWrite disabled 01 = slaveWrite enabled |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.3.1.49 |
||||||||||
|
snmpTrapType
This variable defines which version of SNMP traps are supported, where:
1 = SNMPv1 traps 2 = SNMPv2c traps 3 = SNMPv3 traps |
Integer32r/w Constraints: range: 1-3 |
.1.3.6.1.4.1.7342.2.1.3.1.50 |
||||||||||
|
capsMask
Capablility bits for this management module.
|
Unsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.7342.2.1.3.1.51 |
||||||||||
|
slaveTraps
This variable defines whether the module should be allowed to
transmit traps out ethernet ports eventhough it is not a chassis master. Where: 00 = slaveTraps disabled 01 = slaveTraps enabled |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.3.1.52 |
||||||||||
|
slaveTrapsForward
This variable defines whether the module should be allowed to
forward traps to the chassis master when module is a chassis slave. Default is forward. Where: 00 = slaveTrapsForward disabled 01 = slaveTrapsForward ena… |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.3.1.53 |
||||||||||
|
ipAddr2
Management address 2 IPv4 address
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.54 |
||||||||||
|
subnetmask2
Management address 2 IPv4 subnet mask
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.55 |
||||||||||
|
gateway2
Management address 2 IPv4 gateway address
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.56 |
||||||||||
|
ipaddrEVCassociation
*** This object is deprecated ***
|
OctetStringr/w Constraints: range: 0-45 |
.1.3.6.1.4.1.7342.2.1.3.1.57 |
||||||||||
|
ipaddr2EVCassociation
*** This object is deprecated ***
|
OctetStringr/w Constraints: range: 0-45 |
.1.3.6.1.4.1.7342.2.1.3.1.58 |
||||||||||
|
bootpEnable
Enable or disable BOOTP.
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.7342.2.1.3.1.59 |
||||||||||
|
tftpEnable
Enable or disable TFTP.
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.7342.2.1.3.1.60 |
||||||||||
|
tftpServerIpAddress
This object is the TFTP IPv4 address.
Setting this object also impacts the tftpServerIpAddressString returned value. If an IPv4 address is written to this object the two objects return the same value. … |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.61 |
||||||||||
|
dhcptftpServerIpAddress
TFTP Server IPv4 address as returned by the DHCP Server
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.7342.2.1.3.1.62 |
||||||||||
|
tftpFileName
Selects the TFTP file name.
|
OctetStringr/w Constraints: range: 1-23 |
.1.3.6.1.4.1.7342.2.1.3.1.63 |
||||||||||
|
modeType
Sets the module Mode Type to normal, AP, or SP.
|
OMNITRON-TC-MIBOstModeTyper/w Textual Convention: OMNITRON-TC-MIBOstModeType EnumerationType Values:
|
.1.3.6.1.4.1.7342.2.1.3.1.64 |
||||||||||
|
dhcpPortNumber
Sets the DHCP port number.
2 port module: 1=None, 2=Port 1, 3=Port 2, 4=BP A, 5=BP B 3 port module: 1=None, 2=Port 1, 3=Port 2, 4=Port 3, 5=BP A, 6=BP B 5 ports and higher modules: 1=None, 2..n+1 = Port 1..n |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.3.1.65 |
||||||||||
|
dhcpTagVid
This object configures the DHCP Tag VLAN ID.
|
OMNITRON-TC-MIBOstVlanIdr/w Textual Convention: OMNITRON-TC-MIBOstVlanId Integer32Type Constraints: range: 0..4095 |
.1.3.6.1.4.1.7342.2.1.3.1.66 |
||||||||||
|
trapSrcIpSelect
Selects the trap source address, IP1(1) or IP2(2).
|
Unsigned32r/w Constraints: range: 1-2 |
.1.3.6.1.4.1.7342.2.1.3.1.67 |
||||||||||
|
muxGroupDefaults
This object when written sets the Mux Grouping defaults for a management
module. When read the value always returns 'false'. Writing this sets the Mux Group EVC and bandwidth profile configurations. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.7342.2.1.3.1.68 |
||||||||||
|
portFwdCpu
This object enables forwarding of managment traffic from the selected
ports only for M2 modules only. Management traffic from ports not defined is dropped. all(0) Management traffic f… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7342.2.1.3.1.69 |
||||||||||
|
portFwdCpuList
This object enables forwarding of managment traffic from the selected
ports only for M3, M4, and M5 modules only. Management traffic from ports not defined is dropped. |
OMNITRON-TC-MIBOstPortListr/w Textual Convention: OMNITRON-TC-MIBOstPortList OctetString |
.1.3.6.1.4.1.7342.2.1.3.1.70 |
modulePortsTable
table.1.3.6.1.4.1.7342.2.1.4
·
1 row entry
·
21 columns
This a table of Ports per module. There are as many entries as specified by modnumports in the moduleEntry
Ports per module table.
Indexes
modchassnum modslotnum portnum
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
portnum
Used to get or set state of port.
|
OMNITRON-TC-MIBOstPortNumber Textual Convention: OMNITRON-TC-MIBOstPortNumber Unsigned32Type Constraints: range: 0..99 |
.1.3.6.1.4.1.7342.2.1.4.1.1 |
||||||||
|
portState
Used to get or set state of port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7342.2.1.4.1.2 |
||||||||
|
portEgressRate
Used to get or set the port throughput limit selection.
The following are the limits are enforced by module type: Used on types 80, 96, 70, 90, 86, 84, 87 (lower limit=0, upper limit=7) where: 0 = 100 Mbps … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.4.1.3 |
||||||||
|
portpriority
Used to get or set port user-priority.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.7342.2.1.4.1.4 |
||||||||
|
portcanonicalformatIndicator
Used to get or set port cfi. Currently not used and defaulted to 0
|
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.4.1.5 |
||||||||
|
portvlanidentifier
Used to get or set port VID.
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.7342.2.1.4.1.6 |
||||||||
|
portmlistcriteria
Used to get or set port membership criteria.
|
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.4.1.7 |
||||||||
|
portingresssecurity
Used to get or set port ingress security.
|
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.4.1.8 |
||||||||
|
portegresspolicy
Used to get or set port egress policy.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.7342.2.1.4.1.9 |
||||||||
|
portIngressRate
Used to get or set the port throughput limit selection.
The following are the limits are enforced by module type: Used on types 80, 96, 70, 90, 86, 84, 87 (lower limit=0, upper limit=7) where: 0 = 100 Mbps … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.4.1.10 |
||||||||
|
portSpeed
Used to get the port speed.
0 = undefined 1 = speed10Mbps 2 = speed100Mbps 3 = speed1Gbps 4 = speed10Gbps |
Integer32 Constraints: range: 0-4 |
.1.3.6.1.4.1.7342.2.1.4.1.11 |
||||||||
|
portUnidirectionalAhOamEnable
Used to get/set the unidirectional support.
0 = uniDisabled 1 = uniEnabled |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.4.1.12 |
||||||||
|
portIngressRateDropOrPause
Used to get/set behavior on overflow.
0 = undefined 1 = inDrop 2 = inPause |
Integer32r/w Constraints: range: 0-2 |
.1.3.6.1.4.1.7342.2.1.4.1.13 |
||||||||
|
portIngressRateCBS
Used to get or set the port throughput limit selection.
|
Integer32r/w Constraints: range: 5-256000 |
.1.3.6.1.4.1.7342.2.1.4.1.14 |
||||||||
|
portL2CPmgntProcessing
Used to get or set the port L2Cp processing method.
0 = undefined 1 = inDrop 2 = inForward 3 = inTunnel |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.7342.2.1.4.1.15 |
||||||||
|
portEgressQosPolicy
Used to get or set the port egress QoS Policy.
0 = undefined 1 = fairWeight 2 = starving |
Integer32r/w Constraints: range: 0-2 |
.1.3.6.1.4.1.7342.2.1.4.1.16 |
||||||||
|
portAccessType
Used to get or set the port access type.
0 = undefined 1 = tunnel 2 = access 3 = trunk |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.7342.2.1.4.1.17 |
||||||||
|
portStatsClear
Used to clear the statistics table for this port
|
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.4.1.18 |
||||||||
|
portLinkState
Reports the link state of the port.
0 = No link 1 = Linked |
Integer32 Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.4.1.19 |
||||||||
|
portDuplex
The object indcates the linked port duplex mode.
undefined(0) Port is not linked or state of duplex is unknown halfDuplex(1) Port is linked at half duplex fullDuplex(2) Port is linke… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.7342.2.1.4.1.20 |
||||||||
|
portMacAddress
MAC address of the port. If a MAC address doesn't exist on a
port the value returned is all zeros. |
OctetString Constraints: range: 17-17 |
.1.3.6.1.4.1.7342.2.1.4.1.21 |
portStatsTable
table.1.3.6.1.4.1.7342.2.1.5
·
1 row entry
·
40 columns
This a table of Statistics per port.
extended module statitical information.
Indexes
modchassnum modslotnum portnum
| Column | Syntax | OID |
|---|---|---|
|
txOctets
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.1 |
|
txDropPkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.2 |
|
txBroadcastPkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.3 |
|
txMulticastPkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.4 |
|
txUnicastPkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.5 |
|
txGoodPkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.6 |
|
txErrorPkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.7 |
|
txPausePkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.8 |
|
txCollisions
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.9 |
|
txSingleCollision
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.10 |
|
txMultipleCollision
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.11 |
|
txDeferedTransmit
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.12 |
|
txLateCollision
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.13 |
|
txExcessiveCollision
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.14 |
|
txDroppedEvents
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.15 |
|
rxOctets
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.16 |
|
rxDropPkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.17 |
|
rxBroadcastPkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.18 |
|
rxMulticastPkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.19 |
|
rxUnicastPkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.20 |
|
rxGoodPkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.21 |
|
rxTotalPkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.22 |
|
rxErrorPkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.23 |
|
rxPausePkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.24 |
|
rxUndersizePkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.25 |
|
rxOversizePkts
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.26 |
|
rxFragments
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.27 |
|
rxJabbers
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.28 |
|
rxAlignmentErrors
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.29 |
|
rxFCSErrors
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.30 |
|
rxSymbolErrors
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.31 |
|
rxCRCAlignErrors
Statistics counter - Object name explains its usage.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.32 |
|
rxPackets64
Statistics counter - packets of octet count in object name.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.33 |
|
rxPackets65to127
Statistics counter - packets of octet count in object name.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.34 |
|
rxPackets128to255
Statistics counter - packets of octet count in object name.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.35 |
|
rxPackets256to511
Statistics counter - packets of octet count in object name.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.36 |
|
rxPackets512to1023
Statistics counter - packets of octet count in object name.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.37 |
|
rxPackets1024to1518
Statistics counter - packets of octet count in object name.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.5.1.38 |
|
txOctets64
64 bit octet transmission counter.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.7342.2.1.5.1.39 |
|
rxOctets64
64 bit octet receive counter.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.7342.2.1.5.1.40 |
moduleVLANTable
table.1.3.6.1.4.1.7342.2.1.6
·
1 row entry
·
9 columns
This a table of VLAN entries per module. There is a maximum of 64 valid entries in the table
VLAN module table.
Indexes
modchassnum modslotnum index
| Column | Syntax | OID |
|---|---|---|
|
index
Used to get or set elements in the vlan table entry.
|
Integer32 Constraints: range: 1-64 |
.1.3.6.1.4.1.7342.2.1.6.1.1 |
|
validityflag
Used to set or delete a VLAN table entry.
0 = entry does not exists or is to be deleted, 1 = entry to be created or re-activated (in the case the entry was modified, the module needs to be notified of the change. … |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.6.1.2 |
|
vlanidentifier
Used to set or get the vlan identifier.
valid settable range is 0-4095 |
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.7342.2.1.6.1.3 |
|
port1Membership
Used to set or get the port's membership in the specified vlan.
0 = not a member 1 = include in membership |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.6.1.4 |
|
port2Membership
Used to set or get the port's membership in the specified vlan.
0 = not a member 1 = include in membership |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.6.1.5 |
|
port3Membership
Used to set or get the port's membership in the specified vlan.
0 = not a member 1 = include in membership |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.6.1.6 |
|
port4Membership
Used to set or get the port's membership in the specified vlan.
0 = not a member 1 = include in membership |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.6.1.7 |
|
port5Membership
Used to set or get the port's membership in the specified vlan.
0 = not a member 1 = include in membership |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.6.1.8 |
|
port6Membership
Used to set or get the port's membership in the specified vlan.
0 = not a member 1 = include in membership |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.6.1.9 |
portAHTable
table.1.3.6.1.4.1.7342.2.1.7
·
1 row entry
·
37 columns
This is a table of AH parameter entries per port.
AH port table.
Indexes
modchassnum modslotnum portnum
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
ahEnabled
Used to get or set the state of the AH protocol over specified port.
0 = disable - this port is not actively using the AH protocol 1 = enabled - this port is actively using the AH protocol |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.7.1.1 |
||||
|
ahLpbkMode
Used to get or set the state of the OAM remote loopback.
0 = off - remote loopback is not active 1 = on - remote loopback has been activated |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.7.1.2 |
||||
|
ahLocalMode
Used to get or set the mode AH OAM Client.
0 = PASSIVE - Does not initiate discovery or remote loopbacks 1 = ACTIVE - Initiates discovery process and may initiate remote loopbacks 2 = PASSIVE, PROTECTED - Same as PASSI… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.7342.2.1.7.1.3 |
||||
|
ahRemoteMode
Used to get or set the mode AH OAM Client.
0 = PASSIVE - Does not initiate discovery or remote loopbacks 1 = ACTIVE - Initiates discovery process and may initiate remote loopbacks 2 = PASSIVE, PROTECTED - Same as PASSI… |
Integer32 Constraints: range: 0-3 |
.1.3.6.1.4.1.7342.2.1.7.1.4 |
||||
|
ahLocalMuxState
Used to get local multiplexer state.
0 = FWD - Multiplexer passes MAC client frames to subordinate sublayer 1 = DISCARD - Multiplexer discards MAC client frames |
Integer32 Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.7.1.5 |
||||
|
ahRemoteMuxState
Used to get remote multiplexer state.
0 = FWD - Multiplexer passes MAC client frames to subordinate sublayer 1 = DISCARD - Multiplexer discards MAC client frames |
Integer32 Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.7.1.6 |
||||
|
ahLocalParserState
Used to get local parser state.
0 = FWD - Parser passes received non-OAMPDUs to subordinate sublayer 1 = LOOPBACK - Parser passes received non-OAMPDUs to Multiplexer during remote loopback test 2 = DISCARD - Parse… |
Integer32 Constraints: range: 0-2 |
.1.3.6.1.4.1.7342.2.1.7.1.7 |
||||
|
ahRemoteParserState
Used to get remote parser state.
0 = FWD - Parser passes received non-OAMPDUs to subordinate sublayer 1 = LOOPBACK - Parser passes received non-OAMPDUs to Multiplexer during remote loopback test 2 = DISCARD - Pars… |
Integer32 Constraints: range: 0-2 |
.1.3.6.1.4.1.7342.2.1.7.1.8 |
||||
|
ahLocalSupportVar
Used to get local configured features supported in bit encoded value.
where: bit0 = OAM Mode bit1 = Unidirectional support bit2 = Loopback Support bit3 = interprets link events bit4 = Variable R… |
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.7342.2.1.7.1.9 |
||||
|
ahLocalLinkFlags
Used to get Link Event status in bit encoded value.
where: bit0 = Link Fault bit1 = Dying Gasp bit2 = Critical Event bit3 = Local Evaluating bit4 = Local Stable bit5 = Remote Evaluating … |
Integer32 Constraints: range: 0-127 |
.1.3.6.1.4.1.7342.2.1.7.1.10 |
||||
|
ahLocalLpbkTimeout
Used to get/set Remote Loopback timeout.
Value is in seconds with range 0 - 300. |
Integer32r/w Constraints: range: 0-300 |
.1.3.6.1.4.1.7342.2.1.7.1.11 |
||||
|
ahRemoteSupportVar
Used to get remote configured features supported in bit encoded value.
where: bit0 = OAM Mode bit1 = Unidirectional support bit2 = Loopback Support bit3 = interprets link events bit4 = Variable … |
Integer32 Constraints: range: 0-31 |
.1.3.6.1.4.1.7342.2.1.7.1.12 |
||||
|
ahRemoteLinkFlags
Used to get Link Event status in bit encoded value.
bit0 = Link Fault bit1 = Dying Gasp bit2 = Critical Event bit3 = Local Evaluating bit4 = Local Stable bit5 = Remote Evaluating bit6 = Remote Stable |
Integer32 Constraints: range: 0-127 |
.1.3.6.1.4.1.7342.2.1.7.1.13 |
||||
|
ahRemoteLpbkTimeout
Used to get/set Remote Loopback timeout.
Value is in seconds with range 0 - 300. |
Integer32 Constraints: range: 0-300 |
.1.3.6.1.4.1.7342.2.1.7.1.14 |
||||
|
ahLocalOUI
Used to get the Organizational Unique ID of the local port.
|
OctetString Constraints: range: 3-3 |
.1.3.6.1.4.1.7342.2.1.7.1.15 |
||||
|
ahRemoteOUI
Used to get the Organizational Unique ID of the remote port.
|
OctetString Constraints: range: 3-3 |
.1.3.6.1.4.1.7342.2.1.7.1.16 |
||||
|
ahErroredSymbolPeriodWindow
Used to get or set errored symbol period window for the local port.
|
Unsigned32r/w Constraints: range: 0-60 |
.1.3.6.1.4.1.7342.2.1.7.1.17 |
||||
|
ahErroredSymbolPeriodThreshold
Used to get or set errored symbol period threshold for the local port.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.7.1.18 |
||||
|
ahErroredFrameWindow
Used to get or set the errored symbol window for the local port.
|
Unsigned32r/w Constraints: range: 0-60 |
.1.3.6.1.4.1.7342.2.1.7.1.19 |
||||
|
ahErroredFrameThreshold
Used to get or set the errored symbol threshold for the local port.
|
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.7342.2.1.7.1.20 |
||||
|
ahErroredFramePeriodWindow
Used to get or set the errored frame period window for the local port.
|
Unsigned32r/w Constraints: range: 0-60 |
.1.3.6.1.4.1.7342.2.1.7.1.21 |
||||
|
ahErroredFramePeriodThreshold
Used to get or set the errored frame period threshold for the local port.
|
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.7342.2.1.7.1.22 |
||||
|
ahErroredFrameSecondsWindow
Used to get or set the errored frame seconds window for the local port.
|
Unsigned32r/w Constraints: range: 0-900 |
.1.3.6.1.4.1.7342.2.1.7.1.23 |
||||
|
ahErroredFrameSecondsThreshold
Used to get or set the errored frame seconds threshold for the local port.
|
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.7342.2.1.7.1.24 |
||||
|
ahRemoteLinkPort
Used to get the port number of the remote partner.
Value is in the Range 1-5. A zero port number indicates no connection or not supported |
Integer32 Constraints: range: 0-5 |
.1.3.6.1.4.1.7342.2.1.7.1.25 |
||||
|
ahSymbolErrorRunningTotal
This object indicates the 802.3ah Symbol Error Running Total value from
the last OAM sublayer reset or clear operation. A value of zero indicates that no symbol errors have been detected since the last re… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.7.1.26 |
||||
|
ahSymbolErrorEventTotal
This object indicates the number of 802.3ah Errored Symbol Period Event
TLVs that have been generated since the OAM sublayer was reset or the counters have been cleared. A value of zero indicates that no … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.7.1.27 |
||||
|
ahFrameErrorRunningTotal
This object indicates the sum of the 802.3ah errored frames that have been
detected since the OAM sublayer was reset or clear operation. A value of zero indicates that no errored frames have been detected… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.7.1.28 |
||||
|
ahFrameErrorEventTotal
This object indicates the number of 802.3ah Errored Frame Event TLVs
that have been generated since the OAM sublayer was reset or the counters have been cleared. A value of zero indicates that no Errored … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.7.1.29 |
||||
|
ahFramePeriodRunningTotal
This object indicates the sum of 802.3ah the frame errors that
have been detected that have been since the OAM sublayer was reset or clear operation. A value of zero indicates that no errored frames have … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.7.1.30 |
||||
|
ahFramePeriodEventTotal
This object indicates the number of 802.3ah Errored Frame Period Event
TLVs that have been generated since the OAM sublayer was reset or the counters have been cleared. A value of zero indicates that no E… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.7.1.31 |
||||
|
ahFrameSecondsSummaryRunningTotal
This object indicates the sum of the 802.3ah errored frame seconds that
have been detected that have been since the OAM sublayer was reset or clear operation. A value of zero indicates that no errored fra… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.7.1.32 |
||||
|
ahFrameSecondsSummaryEventTotal
This object indicates the number of 802.3ah Errored Frame Seconds
Summary Event TLVs that have been generated since the OAM sublayer was reset or the counters have been cleared. A value of zero indicates … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.7.1.33 |
||||
|
ahClearStatistics
This object when written clears the 802.3ah statistic counters associated with
a specific port. When read the value always returns 'false'. Writing this value does not change any items in the configuratio… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.7342.2.1.7.1.34 |
||||
|
ahTransmissionRate
This object sets maximum 802.3ah PDU transmission rate. The default
value is 10 (10 frames per second) |
Frames/secUnsigned32r/w Constraints: range: 5-100 |
.1.3.6.1.4.1.7342.2.1.7.1.35 |
||||
|
ahCriticalEventMode
Used to get or set the state of the local critical event mode.
0 = local critical events not enabled 1 = local critical events are enabled |
Unsigned32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.7342.2.1.7.1.36 |
||||
|
ahCriticalEventTrapList
Used to the SNMP traps which will cause the generation of
a local critical event. It is a list of zero or more trap numbers separated by a comma or range, '..'. Example values: 5 5,110,112 100..110 5,… |
OctetStringr/w Constraints: range: 0-45 |
.1.3.6.1.4.1.7342.2.1.7.1.37 |
portSFPTable
table.1.3.6.1.4.1.7342.2.1.8
·
1 row entry
·
16 columns
This is a table of AH parameter entries per port.
SFP port table.
Indexes
modchassnum modslotnum portnum
| Column | Syntax | OID |
|---|---|---|
|
portSFPstatus
Used to get present or absence of SFP device.
0 = undefined 1 = notPresent 2 = present |
Integer32 Constraints: range: 0-2 |
.1.3.6.1.4.1.7342.2.1.8.1.1 |
|
portSFPpageA0
Used to get SFP device EEPROM address A0
|
OctetString Constraints: range: 0-256 |
.1.3.6.1.4.1.7342.2.1.8.1.2 |
|
portSFPpageA2
Used to get SFP device EEPROM address A2
|
OctetString Constraints: range: 0-256 |
.1.3.6.1.4.1.7342.2.1.8.1.3 |
|
portSfpBitRate
SFP Bitrate in Mbps
|
OctetString Constraints: range: 0-8 |
.1.3.6.1.4.1.7342.2.1.8.1.4 |
|
portSfpVendorName
SFP Vendor Name
|
OctetString Constraints: range: 0-16 |
.1.3.6.1.4.1.7342.2.1.8.1.5 |
|
portSfpVendorPartNumber
SFP Vendor Name
|
OctetString Constraints: range: 0-16 |
.1.3.6.1.4.1.7342.2.1.8.1.6 |
|
portSfpVendorSerialNumber
SFP Serial Number
|
OctetString Constraints: range: 0-16 |
.1.3.6.1.4.1.7342.2.1.8.1.7 |
|
portSfpDateCode
SFP Date Code
|
OctetString Constraints: range: 0-10 |
.1.3.6.1.4.1.7342.2.1.8.1.8 |
|
portSfpTemperature
SFP tempearture in degrees Centigrade
|
OctetString Constraints: range: 0-8 |
.1.3.6.1.4.1.7342.2.1.8.1.9 |
|
portSfpVcc
SFP VCC in volts
|
OctetString Constraints: range: 0-8 |
.1.3.6.1.4.1.7342.2.1.8.1.10 |
|
portSfpBiasCurrent
SFP Bias Current in millamps
|
OctetString Constraints: range: 0-8 |
.1.3.6.1.4.1.7342.2.1.8.1.11 |
|
portSfpTxPower
SFP Transmission power in dBm
|
OctetString Constraints: range: 0-16 |
.1.3.6.1.4.1.7342.2.1.8.1.12 |
|
portSfpRxPower
SFP Transmission power in dBm
|
OctetString Constraints: range: 0-16 |
.1.3.6.1.4.1.7342.2.1.8.1.13 |
|
portSfpType
SFP type based upon Transceiver Code field. For example:
'1000BASE-LX', '1000BASE-T', '10G BASE-SR', etc. |
OctetString Constraints: range: 0-16 |
.1.3.6.1.4.1.7342.2.1.8.1.14 |
|
portSfpWavelength
SFP Transmission wavelength in nm
|
OctetString Constraints: range: 0-8 |
.1.3.6.1.4.1.7342.2.1.8.1.15 |
|
portSfpTxDistance
SFP transmission distance, all non-zero fields displayed. If
more than one field is filled displays fields separated by a comma. For example: '12km (9um), 12000m (9um)' '100m (cable)' '30m (OM1), 80m (OM2), 300m (… |
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.7342.2.1.8.1.16 |
userTable
table.1.3.6.1.4.1.7342.2.1.9
·
1 row entry
·
6 columns
This is a table of SNMPv3 users.
User table entry.
Indexes
modchassnum modslotnum userIndex
| Column | Syntax | OID |
|---|---|---|
|
userIndex
User table index
|
Integer32 Constraints: range: 1-4 |
.1.3.6.1.4.1.7342.2.1.9.1.1 |
|
snmpv3UserName
SNMPv3 user name.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.7342.2.1.9.1.2 |
|
snmpv3SecurityLevel
SNMPv3 security level
0 = undefined 1 = no authentication/no privacy 2 = authentication/no privacy 3 = authentication/privacy |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.7342.2.1.9.1.3 |
|
snmpv3AuthPassword
SNMPv3 user authentication password.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.7342.2.1.9.1.4 |
|
snmpv3PrivPassword
SNMPv3 user privacy password.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.7342.2.1.9.1.5 |
|
snmpv3UserType
SNMPv3 User Type
0 = undefined 1 = admin 2 = read-write 3 = read-only 4 = deny |
Integer32r/w Constraints: range: 0-4 |
.1.3.6.1.4.1.7342.2.1.9.1.6 |
.1.3.6.1.4.1.7342.2.1.11
·
1 row entry
·
15 columns
This table supports the module environmental status objects.
This is an environmental table entry.
Indexes
modchassnum modslotnum
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
ostEnvironmentalPs1Status
This object indicates the status of Power Supply PS1 or PSA.
notApplicable(0) Power Supply PS1/PSA is not supported notInstalled(1) Power Supply PS1/PSA is not installed installedNotPowered… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.7342.2.1.11.1.1 |
||||||||
|
ostEnvironmentalPs1VoltageIn
This object indicates PS1/PSA voltage input in millivolts.
A value of zero indicates that no voltage is applied or the power supply is incapable of supplying a voltage input reading. |
millivoltsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.11.1.2 |
||||||||
|
ostEnvironmentalPs1VoltageOut
This object indicates PS1/PSA voltage output in millivolts.
A value of zero indicates that no voltage is output or the power supply is incapable of supplying a voltage output reading. |
millivoltsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.11.1.3 |
||||||||
|
ostEnvironmentalPs1CurrentOut
This object indicates PS1/PSA current output in millianmps.
A value of zero indicates that no current is output or the power supply is incapable of supplying a current output reading. |
milliampsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.11.1.4 |
||||||||
|
ostEnvironmentalPs2Status
This object indicates the status of Power Supply PS2 or PSB.
notApplicable(0) Power Supply PS2/PSB is not supported notInstalled(1) Power Supply PS2/PSB is not installed installedNotPowered… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.7342.2.1.11.1.5 |
||||||||
|
ostEnvironmentalPs2VoltageIn
This object indicates PS2/PSB voltage input in millivolts.
A value of zero indicates that no voltage is applied or the power supply is incapable of supplying a voltage input reading. |
millivoltsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.11.1.6 |
||||||||
|
ostEnvironmentalPs2VoltageOut
This object indicates PS2/PSB voltage output in millivolts.
A value of zero indicates that no voltage is output or the power supply is incapable of supplying a voltage output reading. |
millivoltsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.11.1.7 |
||||||||
|
ostEnvironmentalPs2CurrentOut
This object indicates PS2/PSB current output in millianmps.
A value of zero indicates that no current is output or the power supply is incapable of supplying a current output reading. |
milliampsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.11.1.8 |
||||||||
|
ostEnvironmentalTemperature
This object indicates the module internal ambient temperature in
degrees centigrade. A value of zero indicates that the current temperature is 0 degrees or the module incapable of supplying a temperature … |
degrees centigradeSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7342.2.1.11.1.9 |
||||||||
|
ostEnvironmentalFan1Status
This object indicates the status of Fan 1.
notApplicable(0) Fan 1 is not supported notInstalled(1) Fan 1 is not installed installedNotPowered(2) Fan 1 is installed, but not powered install… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.7342.2.1.11.1.10 |
||||||||
|
ostEnvironmentalFan1Speed
This object indicates the speed of Fan 1 in RPM (revolutions per minute)
A value of zero indicates that the current fan speed is 0 RPM or the fan is not supported or installed. |
rpmSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.11.1.11 |
||||||||
|
ostEnvironmentalFan2Status
This object indicates the status of Fan 2.
notApplicable(0) Fan 2 is not supported notInstalled(1) Fan 2 is not installed installedNotPowered(2) Fan 2 is installed, but not powered install… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.7342.2.1.11.1.12 |
||||||||
|
ostEnvironmentalFan2Speed
This object indicates the speed of Fan 2 in RPM (revolutions per minute)
A value of zero indicates that the current fan speed is 0 RPM or the fan is not supported or installed. |
rpmSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.11.1.13 |
||||||||
|
ostEnvironmentalFan3Status
This object indicates the status of Fan 3.
notApplicable(0) Fan 3 is not supported notInstalled(1) Fan 3 is not installed installedNotPowered(2) Fan 3 is installed, but not powered install… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.7342.2.1.11.1.14 |
||||||||
|
ostEnvironmentalFan3Speed
This object indicates the speed of Fan 3 in RPM (revolutions per minute)
A value of zero indicates that the current fan speed is 0 RPM or the fan is not supported or installed. |
rpmSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.2.1.11.1.15 |