portLinkState
OMNITRON-MIB ·
.1.3.6.1.4.1.7342.2.1.4.1.19
Object
column
Integer32
Reports the link state of the port. 0 = No link 1 = Linked
Context
- MIB
- OMNITRON-MIB
- OID
.1.3.6.1.4.1.7342.2.1.4.1.19- Type
- column
- Access
- readonly
- Status
- current
- Parent
- modulePortsEntry
- Table
- modulePortsTable
- Siblings
- 20
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-1
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portnum Used to get or set state of port. | column | OMNITRON-TC-MIBOstPortNumber | .1.3.6.1.4.1.7342.2.1.4.1.1 |
| portIngressRate Used to get or set the port throughput limit selection.
The following are the limits are enforced by module type:
Used on types 80, 96, 70, 90, 86, 84, 87 (lower limit=0, uppe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7342.2.1.4.1.10 |
| portSpeed Used to get the port speed.
0 = undefined
1 = speed10Mbps
2 = speed100Mbps
3 = speed1Gbps
4 = speed10Gbps | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.11 |
| portUnidirectionalAhOamEnable Used to get/set the unidirectional support.
0 = uniDisabled
1 = uniEnabled | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.12 |
| portIngressRateDropOrPause Used to get/set behavior on overflow.
0 = undefined
1 = inDrop
2 = inPause | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.13 |
| portIngressRateCBS Used to get or set the port throughput limit selection. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.14 |
| portL2CPmgntProcessing Used to get or set the port L2Cp processing method.
0 = undefined
1 = inDrop
2 = inForward
3 = inTunnel | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.15 |
| portEgressQosPolicy Used to get or set the port egress QoS Policy.
0 = undefined
1 = fairWeight
2 = starving | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.16 |
| portAccessType Used to get or set the port access type.
0 = undefined
1 = tunnel
2 = access
3 = trunk | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.17 |
| portStatsClear Used to clear the statistics table for this port | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.18 |
| portState Used to get or set state of port. | column | Enumeration | .1.3.6.1.4.1.7342.2.1.4.1.2 |
| portDuplex The object indcates the linked port duplex mode.
undefined(0) Port is not linked or state of duplex is unknown
halfDuplex(1) Port is linked at half d… | column | Enumeration | .1.3.6.1.4.1.7342.2.1.4.1.20 |
| portMacAddress MAC address of the port. If a MAC address doesn't exist on a
port the value returned is all zeros. | column | OctetString | .1.3.6.1.4.1.7342.2.1.4.1.21 |
| portEgressRate Used to get or set the port throughput limit selection.
The following are the limits are enforced by module type:
Used on types 80, 96, 70, 90, 86, 84, 87 (lower limit=0, uppe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7342.2.1.4.1.3 |
| portpriority Used to get or set port user-priority. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.4 |
| portcanonicalformatIndicator Used to get or set port cfi. Currently not used and defaulted to 0 | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.5 |
| portvlanidentifier Used to get or set port VID. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.6 |
| portmlistcriteria Used to get or set port membership criteria. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.7 |
| portingresssecurity Used to get or set port ingress security. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.8 |
| portegresspolicy Used to get or set port egress policy. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.9 |