portEgressRate
OMNITRON-MIB ·
.1.3.6.1.4.1.7342.2.1.4.1.3
Object
Used to get or set the port throughput limit selection.
The following are the limits are enforced by module type:
Used on types 80, 96, 70, 90, 86, 84, 87 (lower limit=0, upper limit=7)
where:
0 = 100 Mbps
1 = 128 kbps
2 = 256 kbps
3 = 512 kbps
4 = 1 Mbps
5 = 2 Mbps
6 = 4 Mbps
7 = 8 Mbps
Used on types 100, 101 (lower limit=1, upper limit=20)
where:
1 = 64 kbps
2 = 128 kbps
3 = 256 kbps
4 = 512 kbps
5 = 768 kbps
6 = 1 Mbps
7 = 2 Mbps
8 = 3 Mbps
9 = 4 Mbps
10 = 5 Mbps
11 = 6 Mbps
12 = 7 Mbps
13 = 8 Mbps
14 = 9 Mbps
15 = 10 Mbps
16 = 20 Mbps
17 = 30 Mbps
18 = 40 Mbps
19 = 50 Mbps
20 = 100 Mbps
Used on types 105, 106 (lower limit=1, upper limit=33)
1 = 64 kbps
2 = 128 kbps
3 = 256 kbps
4 = 512 kbps
5 = 768 kbps
6 = 1 Mbps
7 = 2 Mbps
8 = 3 Mbps
9 = 4 Mbps
10 = 5 Mbps
11 = 6 Mbps
12 = 7 Mbps
13 = 8 Mbps
14 = 9 Mbps
15 = 10 Mbps
16 = 20 Mbps
17 = 30 Mbps
18 = 40 Mbps
19 = 50 Mbps
20 = 60 Mbps
21 = 70 Mbps
22 = 80 Mbps
23 = 90 Mbps
24 = 100 Mbps
25 = 200 Mbps
26 = 300 Mbps
27 = 400 Mbps
28 = 500 Mbps
29 = 600 Mbps
30 = 700 Mbps
31 = 800 Mbps
32 = 900 Mbps
33 = 1000 Mbps
Types 97, 99, 102, 108, 109, 112, 113 use numeric values in kpbs
with a lower limit of 64 and an upper limit of 1,000,000.
Types not listed have no limit.
Context
- MIB
- OMNITRON-MIB
- OID
.1.3.6.1.4.1.7342.2.1.4.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- modulePortsEntry
- Table
- modulePortsTable
- Siblings
- 20
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portnum Used to get or set state of port. | column | OMNITRON-TC-MIBOstPortNumber | .1.3.6.1.4.1.7342.2.1.4.1.1 |
| portIngressRate Used to get or set the port throughput limit selection.
The following are the limits are enforced by module type:
Used on types 80, 96, 70, 90, 86, 84, 87 (lower limit=0, uppe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7342.2.1.4.1.10 |
| portSpeed Used to get the port speed.
0 = undefined
1 = speed10Mbps
2 = speed100Mbps
3 = speed1Gbps
4 = speed10Gbps | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.11 |
| portUnidirectionalAhOamEnable Used to get/set the unidirectional support.
0 = uniDisabled
1 = uniEnabled | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.12 |
| portIngressRateDropOrPause Used to get/set behavior on overflow.
0 = undefined
1 = inDrop
2 = inPause | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.13 |
| portIngressRateCBS Used to get or set the port throughput limit selection. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.14 |
| portL2CPmgntProcessing Used to get or set the port L2Cp processing method.
0 = undefined
1 = inDrop
2 = inForward
3 = inTunnel | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.15 |
| portEgressQosPolicy Used to get or set the port egress QoS Policy.
0 = undefined
1 = fairWeight
2 = starving | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.16 |
| portAccessType Used to get or set the port access type.
0 = undefined
1 = tunnel
2 = access
3 = trunk | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.17 |
| portStatsClear Used to clear the statistics table for this port | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.18 |
| portLinkState Reports the link state of the port.
0 = No link
1 = Linked | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.19 |
| portState Used to get or set state of port. | column | Enumeration | .1.3.6.1.4.1.7342.2.1.4.1.2 |
| portDuplex The object indcates the linked port duplex mode.
undefined(0) Port is not linked or state of duplex is unknown
halfDuplex(1) Port is linked at half d… | column | Enumeration | .1.3.6.1.4.1.7342.2.1.4.1.20 |
| portMacAddress MAC address of the port. If a MAC address doesn't exist on a
port the value returned is all zeros. | column | OctetString | .1.3.6.1.4.1.7342.2.1.4.1.21 |
| portpriority Used to get or set port user-priority. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.4 |
| portcanonicalformatIndicator Used to get or set port cfi. Currently not used and defaulted to 0 | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.5 |
| portvlanidentifier Used to get or set port VID. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.6 |
| portmlistcriteria Used to get or set port membership criteria. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.7 |
| portingresssecurity Used to get or set port ingress security. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.8 |
| portegresspolicy Used to get or set port egress policy. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.4.1.9 |