ahCriticalEventMode
OMNITRON-MIB ·
.1.3.6.1.4.1.7342.2.1.7.1.36
Object
column
r/w
Unsigned32
Used to get or set the state of the local critical event mode. 0 = local critical events not enabled 1 = local critical events are enabled
Context
- MIB
- OMNITRON-MIB
- OID
.1.3.6.1.4.1.7342.2.1.7.1.36- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- portAHEntry
- Table
- portAHTable
- Siblings
- 36
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-1
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ahEnabled Used to get or set the state of the AH protocol over specified port.
0 = disable - this port is not actively using the AH protocol
1 = enabled - this port is actively using the AH… | column | Integer32 | .1.3.6.1.4.1.7342.2.1.7.1.1 |
| ahLocalLinkFlags Used to get Link Event status in bit encoded value.
where:
bit0 = Link Fault
bit1 = Dying Gasp
bit2 = Critical Event
bit3 = Local Evaluating
bit4 = Local … | column | Integer32 | .1.3.6.1.4.1.7342.2.1.7.1.10 |
| ahLocalLpbkTimeout Used to get/set Remote Loopback timeout.
Value is in seconds with range 0 - 300. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.7.1.11 |
| ahRemoteSupportVar Used to get remote configured features supported in bit encoded value.
where:
bit0 = OAM Mode
bit1 = Unidirectional support
bit2 = Loopback Support
bit3 = i… | column | Integer32 | .1.3.6.1.4.1.7342.2.1.7.1.12 |
| ahRemoteLinkFlags Used to get Link Event status in bit encoded value.
bit0 = Link Fault
bit1 = Dying Gasp
bit2 = Critical Event
bit3 = Local Evaluating
bit4 = Local Stable
bit5 = Remote Evalu… | column | Integer32 | .1.3.6.1.4.1.7342.2.1.7.1.13 |
| ahRemoteLpbkTimeout Used to get/set Remote Loopback timeout.
Value is in seconds with range 0 - 300. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.7.1.14 |
| ahLocalOUI Used to get the Organizational Unique ID of the local port. | column | OctetString | .1.3.6.1.4.1.7342.2.1.7.1.15 |
| ahRemoteOUI Used to get the Organizational Unique ID of the remote port. | column | OctetString | .1.3.6.1.4.1.7342.2.1.7.1.16 |
| ahErroredSymbolPeriodWindow Used to get or set errored symbol period window for the local port. | column | Unsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.17 |
| ahErroredSymbolPeriodThreshold Used to get or set errored symbol period threshold for the local port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.18 |
| ahErroredFrameWindow Used to get or set the errored symbol window for the local port. | column | Unsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.19 |
| ahLpbkMode Used to get or set the state of the OAM remote loopback.
0 = off - remote loopback is not active
1 = on - remote loopback has been activated | column | Integer32 | .1.3.6.1.4.1.7342.2.1.7.1.2 |
| ahErroredFrameThreshold Used to get or set the errored symbol threshold for the local port. | column | Unsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.20 |
| ahErroredFramePeriodWindow Used to get or set the errored frame period window for the local port. | column | Unsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.21 |
| ahErroredFramePeriodThreshold Used to get or set the errored frame period threshold for the local port. | column | Unsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.22 |
| ahErroredFrameSecondsWindow Used to get or set the errored frame seconds window for the local port. | column | Unsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.23 |
| ahErroredFrameSecondsThreshold Used to get or set the errored frame seconds threshold for the local port. | column | Unsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.24 |
| ahRemoteLinkPort Used to get the port number of the remote partner.
Value is in the Range 1-5. A zero port number indicates no connection or not supported | column | Integer32 | .1.3.6.1.4.1.7342.2.1.7.1.25 |
| ahSymbolErrorRunningTotal This object indicates the 802.3ah Symbol Error Running Total value from
the last OAM sublayer reset or clear operation.
A value of zero indicates that no symbol err… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.26 |
| ahSymbolErrorEventTotal This object indicates the number of 802.3ah Errored Symbol Period Event
TLVs that have been generated since the OAM sublayer was reset or the
counters have been cleared.
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.27 |
| ahFrameErrorRunningTotal This object indicates the sum of the 802.3ah errored frames that have been
detected since the OAM sublayer was reset or clear operation.
A value of zero indicates t… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.28 |
| ahFrameErrorEventTotal This object indicates the number of 802.3ah Errored Frame Event TLVs
that have been generated since the OAM sublayer was reset or the
counters have been cleared.
A … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.29 |
| ahLocalMode Used to get or set the mode AH OAM Client.
0 = PASSIVE - Does not initiate discovery or remote loopbacks
1 = ACTIVE - Initiates discovery process and may initiate remote loopback… | column | Integer32 | .1.3.6.1.4.1.7342.2.1.7.1.3 |
| ahFramePeriodRunningTotal This object indicates the sum of 802.3ah the frame errors that
have been detected that have been since the OAM sublayer was reset or
clear operation.
A value of zer… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.30 |
| ahFramePeriodEventTotal This object indicates the number of 802.3ah Errored Frame Period Event
TLVs that have been generated since the OAM sublayer was reset or the
counters have been cleared.
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.31 |
| ahFrameSecondsSummaryRunningTotal This object indicates the sum of the 802.3ah errored frame seconds that
have been detected that have been since the OAM sublayer was reset or
clear operation.
A val… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.32 |
| ahFrameSecondsSummaryEventTotal This object indicates the number of 802.3ah Errored Frame Seconds
Summary Event TLVs that have been generated since the OAM sublayer was
reset or the counters have been cleared.
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.33 |
| ahClearStatistics This object when written clears the 802.3ah statistic counters associated with
a specific port. When read the value always returns 'false'.
Writing this value does … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.2.1.7.1.34 |
| ahTransmissionRate This object sets maximum 802.3ah PDU transmission rate. The default
value is 10 (10 frames per second) | column | Frames/sec Unsigned32 | .1.3.6.1.4.1.7342.2.1.7.1.35 |
| ahCriticalEventTrapList Used to the SNMP traps which will cause the generation of
a local critical event. It is a list of zero or more trap numbers
separated by a comma or range, '..'.
Exa… | column | OctetString | .1.3.6.1.4.1.7342.2.1.7.1.37 |
| ahRemoteMode Used to get or set the mode AH OAM Client.
0 = PASSIVE - Does not initiate discovery or remote loopbacks
1 = ACTIVE - Initiates discovery process and may initiate remote loopback… | column | Integer32 | .1.3.6.1.4.1.7342.2.1.7.1.4 |
| ahLocalMuxState Used to get local multiplexer state.
0 = FWD - Multiplexer passes MAC client frames to subordinate sublayer
1 = DISCARD - Multiplexer discards MAC client frames | column | Integer32 | .1.3.6.1.4.1.7342.2.1.7.1.5 |
| ahRemoteMuxState Used to get remote multiplexer state.
0 = FWD - Multiplexer passes MAC client frames to subordinate sublayer
1 = DISCARD - Multiplexer discards MAC client frames | column | Integer32 | .1.3.6.1.4.1.7342.2.1.7.1.6 |
| ahLocalParserState Used to get local parser state.
0 = FWD - Parser passes received non-OAMPDUs to subordinate sublayer
1 = LOOPBACK - Parser passes received non-OAMPDUs to Multiplexer during r… | column | Integer32 | .1.3.6.1.4.1.7342.2.1.7.1.7 |
| ahRemoteParserState Used to get remote parser state.
0 = FWD - Parser passes received non-OAMPDUs to subordinate sublayer
1 = LOOPBACK - Parser passes received non-OAMPDUs to Multiplexer during … | column | Integer32 | .1.3.6.1.4.1.7342.2.1.7.1.8 |
| ahLocalSupportVar Used to get local configured features supported in bit encoded value.
where:
bit0 = OAM Mode
bit1 = Unidirectional support
bit2 = Loopback Support
bit3 = in… | column | Integer32 | .1.3.6.1.4.1.7342.2.1.7.1.9 |