enableSNMPFunction
OMNITRON-MIB ·
.1.3.6.1.4.1.7342.2.1.3.1.28
Object
column
r/w
Integer32
This variable defines whether the SNMP Agent is enabled at the NMM. Where: 00 = SNMP disabled 01 = SNMP enabled
Context
- MIB
- OMNITRON-MIB
- OID
.1.3.6.1.4.1.7342.2.1.3.1.28- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- moduleMgtCfgEntry
- Table
- moduleMgtCfgTable
- Siblings
- 69
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-1
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sysAdminStatus This variable provides the status for a management module's ability to make
changes to the system. In backplane slave, a management module cannot make
system modification. Modifi… | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.1 |
| mmname Management Modules chassis name.
For the M2 modules the max size is 32 octets.
For the GM3, GM4, XM5 the max size is 255 octets when a module is
acce… | column | OctetString | .1.3.6.1.4.1.7342.2.1.3.1.10 |
| traphost1 This object is the trap host 1 IPv4 address.
Setting this object also impacts the equivalent ostIpTraphostCfgTable
returned value. If an IPv4 address is written … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.11 |
| traphost2 This object is the trap host 2 IPv4 address.
Setting this object also impacts the equivalent ostIpTraphostCfgTable
returned value. If an IPv4 address is written … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.12 |
| traphost3 This object is the trap host 3 IPv4 address.
Setting this object also impacts the equivalent ostIpTraphostCfgTable
returned value. If an IPv4 address is written … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.13 |
| traphost4 This object is the trap host 4 IPv4 address.
Setting this object also impacts the equivalent ostIpTraphostCfgTable
returned value. If an IPv4 address is written … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.14 |
| traphost5 This object is the trap host 5 IPv4 address.
Setting this object also impacts the equivalent ostIpTraphostCfgTable
returned value. If an IPv4 address is written … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.15 |
| traphost6 This object is the trap host 6 IPv4 address.
Setting this object also impacts the equivalent ostIpTraphostCfgTable
returned value. If an IPv4 address is written … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.16 |
| traphost7 This object is the trap host 7 IPv4 address.
Setting this object also impacts the equivalent ostIpTraphostCfgTable
returned value. If an IPv4 address is written … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.17 |
| traphost8 This object is the trap host 8 IPv4 address.
Setting this object also impacts the equivalent ostIpTraphostCfgTable
returned value. If an IPv4 address is written … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.18 |
| sysloc Management Modules system location.
For the M2 modules the max size is 32 octets.
For the GM3, GM4, XM5 the max size is 64 octets when a module is
ac… | column | OctetString | .1.3.6.1.4.1.7342.2.1.3.1.19 |
| sysDateTime This variable provides the date and time in display format:
nn/dd/yyyy hh:mm:ss
where nn = 2 digit month, dd = 2 digit day, yyyy = 4 digit year
hh - 2 digit hour 0-23, mm = … | column | OctetString | .1.3.6.1.4.1.7342.2.1.3.1.2 |
| syscon Management Modules system Contact information.
For the M2 modules the max size is 32 octets.
For the GM3, GM4, XM5 the max size is 64 octets when a m… | column | OctetString | .1.3.6.1.4.1.7342.2.1.3.1.20 |
| serialpass Serial interfacce password for M2 and M3 modules | column | OctetString | .1.3.6.1.4.1.7342.2.1.3.1.21 |
| telnetpass Telnet and SSH plain text password for the M2 and M3 modules | column | OctetString | .1.3.6.1.4.1.7342.2.1.3.1.22 |
| ftppasswrd FTP password for the M2 and M3 modules | column | OctetString | .1.3.6.1.4.1.7342.2.1.3.1.23 |
| keepAliveInterval This the interval used by the NMM to send out keep alive traps. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.24 |
| vlanIdOst Management module VLAN tagged packet ID. | column | OMNITRON-TC-MIBOstVlanId | .1.3.6.1.4.1.7342.2.1.3.1.25 |
| nmmCfgSerialBaudrate This variable defines the baud rate for the serial interface to the NMM.
Where:
1 = 300 bps
2 = 1200 bps
3 = 2400 bps
4 = 4800 bps
5 = 9600 bps
6 = 19200 bps
7 = 384… | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.26 |
| enabledFunctions This variable defines which special functions are enabled at the NMM.
Where:
0x01 = Keep Alive trap enabled
0x02 = Telnet enabled
0x04 = FTP enabled
0x08 = switch relo… | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.27 |
| nmmCfgState This variable defines the state of the configuration changes made to the NMM.
Where:
0x00 = No changes
0x02 = Changes Pending (not saved in Flash)
0x04 = Saved in Flash, Pen… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7342.2.1.3.1.29 |
| macAddr MAC address of the management module | column | OctetString | .1.3.6.1.4.1.7342.2.1.3.1.3 |
| nmmSecureMode This variable defines the mode the Management module will operate in when configured for SECURE COMMUNICATIONS.
Where:
0x00 = No Secure Communications
0x01 = Secure Proxy
0x… | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.30 |
| nmmSecureConnState This variable returns the secure connection state between the proxy and secure slave.
Where:
0x00 = Not connected
0x01 = Connection Pending
0x02 = Connection established
0… | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.31 |
| nmmIpProtocolState This variable defines whether the IP protocol is active or disabled.
0 = Active
1 = Disabled | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.32 |
| nmmIpDisabled This variable defines the configuration value for IP protocol's desired state.
0 = ipActive
1 = ipDisabled | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.33 |
| vlanPri Management module VLAN tagged packet priority. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.34 |
| enableSNMPWrites Permit SNMP SET operations. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.35 |
| cpuVoltageIn voltage input to cpu. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7342.2.1.3.1.36 |
| cpuVoltageOut Voltage out from the cpu. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7342.2.1.3.1.37 |
| cpuTemperature The ambient temperature of the CPU. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7342.2.1.3.1.38 |
| nmmSecureSlaveSlot The slot number of the secure slave in the remote chassis when
configured for SECURE COMMUNICATIONS. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.39 |
| ipAddr Management address 1 IPv4 address | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.4 |
| dhcpIpAddr This object is the IPv4 address as returned by the DHCP server | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.40 |
| dhcpSubnetmask This object is the IPv4 subnet mask as returned by the DHCP server | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.41 |
| dhcpGateway This object is theIPv4 gateway address as returned by the DHCP server | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.42 |
| nmmOAMmgmtMode This variable configures the protocol the Management module will use to communicate
with remote chassis when operating in secure mode.
Where:
0x01 = (OAM_OFF) No Secure … | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.43 |
| customertag Value for customer tag. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.44 |
| servicetag Value for service tag. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.45 |
| cnodeControl Controls whether the module is operating as a Cnode. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.46 |
| cnodeCIR Cnode CIR
Where: 1 = 64 Kbps
2 = 128 Kbps
3 = 192 Kbps | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.47 |
| enableSNMPv3Function This variable defines whether the SNMPv3 Agent is enabled at the NMM.
Where:
00 = SNMP disabled
01 = SNMP enabled | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.48 |
| slaveWrite This variable defines whether the module should be allowed to make
configurations to itself when in the chassis slave mode.
Where:
00 = slaveWrite disabled
01 = slaveWrite ena… | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.49 |
| subnetmask Management address 1 IPv4 subnet mask | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.5 |
| snmpTrapType This variable defines which version of SNMP traps are supported, where:
1 = SNMPv1 traps
2 = SNMPv2c traps
3 = SNMPv3 traps | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.50 |
| capsMask Capablility bits for this management module. | column | Unsigned32 | .1.3.6.1.4.1.7342.2.1.3.1.51 |
| slaveTraps This variable defines whether the module should be allowed to
transmit traps out ethernet ports eventhough it is not a chassis master.
Where:
00 = slaveTraps disabled
01 = sla… | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.52 |
| slaveTrapsForward This variable defines whether the module should be allowed to
forward traps to the chassis master when module is a chassis slave. Default is forward.
Where:
00 = slaveTrapsForwa… | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.53 |
| ipAddr2 Management address 2 IPv4 address | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.54 |
| subnetmask2 Management address 2 IPv4 subnet mask | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.55 |
| gateway2 Management address 2 IPv4 gateway address | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.56 |
| ipaddrEVCassociation *** This object is deprecated *** | column | OctetString | .1.3.6.1.4.1.7342.2.1.3.1.57 |
| ipaddr2EVCassociation *** This object is deprecated *** | column | OctetString | .1.3.6.1.4.1.7342.2.1.3.1.58 |
| bootpEnable Enable or disable BOOTP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.2.1.3.1.59 |
| gateway Management address 1 IPv4 gateway address | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.6 |
| tftpEnable Enable or disable TFTP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.2.1.3.1.60 |
| tftpServerIpAddress This object is the TFTP IPv4 address.
Setting this object also impacts the tftpServerIpAddressString
returned value. If an IPv4 address is written to this object… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.61 |
| dhcptftpServerIpAddress TFTP Server IPv4 address as returned by the DHCP Server | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.2.1.3.1.62 |
| tftpFileName Selects the TFTP file name. | column | OctetString | .1.3.6.1.4.1.7342.2.1.3.1.63 |
| modeType Sets the module Mode Type to normal, AP, or SP. | column | OMNITRON-TC-MIBOstModeType | .1.3.6.1.4.1.7342.2.1.3.1.64 |
| dhcpPortNumber Sets the DHCP port number.
2 port module: 1=None, 2=Port 1, 3=Port 2, 4=BP A, 5=BP B
3 port module: 1=None, 2=Port 1, 3=Port 2, 4=Port 3, 5=BP A, 6=BP B
5 ports and higher modul… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7342.2.1.3.1.65 |
| dhcpTagVid This object configures the DHCP Tag VLAN ID. | column | OMNITRON-TC-MIBOstVlanId | .1.3.6.1.4.1.7342.2.1.3.1.66 |
| trapSrcIpSelect Selects the trap source address, IP1(1) or IP2(2). | column | Unsigned32 | .1.3.6.1.4.1.7342.2.1.3.1.67 |
| muxGroupDefaults This object when written sets the Mux Grouping defaults for a management
module. When read the value always returns 'false'.
Writing this sets the Mux Group EVC and… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.2.1.3.1.68 |
| portFwdCpu This object enables forwarding of managment traffic from the selected
ports only for M2 modules only. Management traffic from ports not defined
is dropped.
all(0) … | column | Enumeration | .1.3.6.1.4.1.7342.2.1.3.1.69 |
| readCommunity SNMPv1/v2c read community name. | column | OctetString | .1.3.6.1.4.1.7342.2.1.3.1.7 |
| portFwdCpuList This object enables forwarding of managment traffic from the selected
ports only for M3, M4, and M5 modules only. Management traffic from
ports not defined is dropped. | column | OMNITRON-TC-MIBOstPortList | .1.3.6.1.4.1.7342.2.1.3.1.70 |
| writeCommunity SNMPv1/v2c write community name. | column | OctetString | .1.3.6.1.4.1.7342.2.1.3.1.8 |
| mychassnum NMMs chassis number. | column | Integer32 | .1.3.6.1.4.1.7342.2.1.3.1.9 |