LANTRONIX-SLC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

384

slcNetEthIfTable

table

.1.3.6.1.4.1.244.1.1.1.1.2 · 1 row entry · 7 columns

Open in standard view

Table of Ethernet network entries.  The number of entries is 
given by the value of slcNetEthIfNumber.

slcNetEthIfEntry entry .1.3.6.1.4.1.244.1.1.1.1.2.1

An entry with the attributes for each Ethernet interface. Ethernet
Port Eth1 is always index 1, and Eth2 is always index 2.

Indexes

slcNetEthIfIndex

Column Syntax OID

slcNetEthIfIndex

Reference index for each Ethernet interface.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.244.1.1.1.1.2.1.1

slcNetEthIfSource

The state/source for the IP Address and subnet mask for the
Ethernet interface.

Enumeration

Enumerated Values:

1	disabled
2	dhcp
3	bootp
4	static

.1.3.6.1.4.1.244.1.1.1.1.2.1.2

slcNetEthIfMode

The speed and duplex for the Ethernet interface.

Enumeration

Enumerated Values:

1	autoNegotiate
2	halfDuplex10mbit
3	fullDuplex10mbit
4	halfDuplex100mbit
5	fullDuplex100mbit
6	halfDuplex1000mbit
7	fullDuplex1000mbit

.1.3.6.1.4.1.244.1.1.1.1.2.1.3

slcNetEthIfIPv6Addr

The IPv6 Address for each Ethernet interface.

IPV6-TCIpv6Address

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.244.1.1.1.1.2.1.4

slcNetEthIfIPv6PrefixLength

The length of the prefix for slcNetEthIfIPv6Addr (in bits).

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.244.1.1.1.1.2.1.5

slcNetEthIfMTU

The Maximum Transmission Unit for the Ethernet interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.1.1.2.1.6

slcNetEthIfMacAddress

The MAC Address for the Ethernet interface.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.244.1.1.1.1.2.1.7

slcNetFirewallRulesetTable

table

.1.3.6.1.4.1.244.1.1.1.2.10 · 1 row entry · 4 columns

Open in standard view

Table of IP Filter Rulesets.  The number of entries is 
given by the value of slcNetFirewallRulesetNumber.

slcNetFirewallRulesetEntry entry .1.3.6.1.4.1.244.1.1.1.2.10.1

An entry with all the attributes, including the rules, for
an IP Filter Ruleset.

Indexes

slcNetFirewallRulesetIndex

Column	Syntax	OID
slcNetFirewallRulesetIndex Reference index for each IP Filter Ruleset.	Integer32 Constraints: `range: 1-64`	`.1.3.6.1.4.1.244.1.1.1.2.10.1.1`
slcNetFirewallRulesetName The name assigned to the IP Filter Ruleset.	OctetString	`.1.3.6.1.4.1.244.1.1.1.2.10.1.2`
slcNetFirewallRulesetNumRules The number of rules in the slcNetFirewallRulesetRules string.	Integer32 Constraints: `range: 1-32`	`.1.3.6.1.4.1.244.1.1.1.2.10.1.3`
slcNetFirewallRulesetRules The IP Filter rules that are defined for the Ruleset. The rule format is <IP>/<Mask Bits>;<Protocol>;<Ports>;<Action> and rules are separated by a colon. If the string is truncated because of system limitations, th…	OctetString	`.1.3.6.1.4.1.244.1.1.1.2.10.1.4`

slcNetFirewallMappingTable

table

.1.3.6.1.4.1.244.1.1.1.2.12 · 1 row entry · 4 columns

Open in standard view

Table of mappings between IP Filter Rulesets and interfaces.  
The number of entries is given by the value of 
slcNetFirewallMappingNumber.

slcNetFirewallMappingEntry entry .1.3.6.1.4.1.244.1.1.1.2.12.1

An entry defining an interface that has an IP Filter Ruleset
assigned to it. The interface can be either an Ethernet
interface or a PC Card or Device Port modem.

Indexes

slcNetFirewallMappingIndex

Column Syntax OID

slcNetFirewallMappingIndex

Reference index for each IP Filter mapping.

Integer32

Constraints:
range: 1-64

.1.3.6.1.4.1.244.1.1.1.2.12.1.1

slcNetFirewallMappingIfac

The interface which has an IP Filter Ruleset assigned to it.
If the interface is devicePort or usbPort,
slcNetFirewallMappingIfacId defines which Device Port or USB
Port (with an attached modem) the Ruleset is assig…

Enumeration

Enumerated Values:

1	ethernet1
2	ethernet2
3	upperPCCard
4	lowerPCCard
5	devicePort
6	usbPort
7	internalModem

.1.3.6.1.4.1.244.1.1.1.2.12.1.2

slcNetFirewallMappingIfacId

The identifier for a Device Port if slcNetFirewallMappingIfac
equals devicePort(5), or the identifier for a USB Port if
slcNetFirewallMappingIfac equals usbPort. Otherwise equals
zero.

Integer32

Constraints:
range: 0-48

.1.3.6.1.4.1.244.1.1.1.2.12.1.3

slcNetFirewallMappingRuleset

The name of the IP Filter Ruleset assigned to the interface.

OctetString

.1.3.6.1.4.1.244.1.1.1.2.12.1.4

slcNetRouteStaticTable

table

.1.3.6.1.4.1.244.1.1.1.3.5 · 1 row entry · 4 columns

Open in standard view

Table of static route entries.  The number of entries is 
given by the value of slcNetRouteStaticNumber.

slcNetRouteStaticEntry entry .1.3.6.1.4.1.244.1.1.1.3.5.1

An entry with the IP Address, subnet mask, and gateway
for a static route.

Indexes

slcNetRouteStaticIndex

Column	Syntax	OID
slcNetRouteStaticIndex Reference index for each static route.	Integer32 Constraints: `range: 1-64`	`.1.3.6.1.4.1.244.1.1.1.3.5.1.1`
slcNetRouteStaticIP The IP Address for the static route.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.244.1.1.1.3.5.1.2`
slcNetRouteStaticMask The subnet mask for the static route.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.244.1.1.1.3.5.1.3`
slcNetRouteStaticGateway The gateway for the static route.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.244.1.1.1.3.5.1.4`

slcServNFSMountTable

table

.1.3.6.1.4.1.244.1.1.2.8.1 · 1 row entry · 5 columns

Open in standard view

Table of NFS Mounts.

slcServNFSMountEntry entry .1.3.6.1.4.1.244.1.1.2.8.1.1

An entry containing a NFS Mount and it's attributes.

Indexes

slcServNFSMountIndex

Column Syntax OID

slcServNFSMountIndex

Reference index for each NFS Mount.

Integer32

Constraints:
range: 1-3

.1.3.6.1.4.1.244.1.1.2.8.1.1.1

slcServNFSMountRemoteDir

The remote directory of the NFS Mount, in the format
<remote server>:/<remote directory>.

OctetString

.1.3.6.1.4.1.244.1.1.2.8.1.1.2

slcServNFSMountLocalDir

The directory in the SLC on which the remote directory is
mounted.

OctetString

.1.3.6.1.4.1.244.1.1.2.8.1.1.3

slcServNFSMountReadWrite

If enabled, the remote NFS directory is mounted read-write.
If disabled, the remote NFS directory is mounted read-only.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.2.8.1.1.4

slcServNFSMountMount

If enabled, the remote NFS directory is configured to be
mounted. If disabled, the remote NFS directory will not be
mounted, or will be unmounted if is is mounted.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.2.8.1.1.5

slcServSLCNetTable

table

.1.3.6.1.4.1.244.1.1.2.10.3 · 1 row entry · 2 columns

Open in standard view

Table of manually entered IP Address entries.  The number of 
entries is given by the value of slcServSLCNetNumber.

slcServSLCNetEntry entry .1.3.6.1.4.1.244.1.1.2.10.3.1

An entry containing an IP Address for searching the SLC Network.

Indexes

slcServSLCNetIndex

Column	Syntax	OID
slcServSLCNetIndex Reference index for each manual IP Address.	Integer32 Constraints: `range: 1-200`	`.1.3.6.1.4.1.244.1.1.2.10.3.1.1`
slcServSLCNetIP The IP Address to search for in the SLC Network.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.244.1.1.2.10.3.1.2`

slcServHostListTable

table

.1.3.6.1.4.1.244.1.1.2.12.2 · 1 row entry · 6 columns

Open in standard view

Table of Host Lists.  The number of entries is given by the 
value of slcServHostListNumber.

slcServHostListEntry entry .1.3.6.1.4.1.244.1.1.2.12.2.1

An entry containing a Host List, used for Dial-in connections
on a Device Port or PC Card modem.

Indexes

slcServHostListIndex

Column Syntax OID

slcServHostListIndex

Reference index for each Host List.

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.244.1.1.2.12.2.1.1

slcServHostListName

The unique name assigned to the Host List.

OctetString

.1.3.6.1.4.1.244.1.1.2.12.2.1.2

slcServHostListRetryCount

The number of times to retry connections to an individual host
within the Host List.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.2.12.2.1.3

slcServHostListAuth

If enabled, authentication is enabled for the hosts in the
Host List.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.2.12.2.1.4

slcServHostListNumHosts

The number of individual hosts in the Host List.

Integer32

Constraints:
range: 0-10

.1.3.6.1.4.1.244.1.1.2.12.2.1.5

slcServHostListHosts

A string containing all hosts in the Host List; the entry for
each host is separated by a ';'. Each host entry is formatted
as follows: '<Host>,<Protocol>,<TCP Port>,<Escape Sequence>;'.

OctetString

.1.3.6.1.4.1.244.1.1.2.12.2.1.6

slcServSiteTable

table

.1.3.6.1.4.1.244.1.1.2.14.2 · 1 row entry · 22 columns

Open in standard view

Table of Sites.  The number of entries is given by the 
value of slcServSiteNumber.

slcServSiteEntry entry .1.3.6.1.4.1.244.1.1.2.14.2.1

An entry containing a Site, used for connections on a
Device Port or PC Card/USB modem.

Indexes

slcServSiteIndex

Column Syntax OID

slcServSiteIndex

Reference index for each Site.

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.244.1.1.2.14.2.1.1

slcServSiteName

The unique name assigned to the Site.

OctetString

.1.3.6.1.4.1.244.1.1.2.14.2.1.2

slcServSitePort

The port the Site is assigned to. If the port is devicePort
or usbPort, slcServSitePortId defines which Device Port or USB
Port (with an attached modem) the port is assigned to.

Enumeration

Enumerated Values:

1	none
2	devicePort
3	upperPCCard
4	lowerPCCard
5	usbPort
6	internalModem

.1.3.6.1.4.1.244.1.1.2.14.2.1.3

slcServSitePortId

The identifier for a Device Port if slcServSitePort equals
devicePort(1), or the identifier for a USB Port if
slcServSitePort equals usbPort(5). Otherwise equals zero.

Integer32

Constraints:
range: 0-48

.1.3.6.1.4.1.244.1.1.2.14.2.1.4

slcServSiteLoginHost

For PPP or text authentication on dialin, the user login or
CHAP host to use for authentication. If authentication is
successful, the rest of the site parameters will be used for
the connection.

OctetString

.1.3.6.1.4.1.244.1.1.2.14.2.1.5

slcServSiteCHAPSecret

For PPP authentication on dialin, the CHAP secret to use for
authentication.

OctetString

.1.3.6.1.4.1.244.1.1.2.14.2.1.6

slcServSiteTimeout

The timeout (in minutes) for text connections. A value
of 0 indicates that timeouts are disabled.

minutesInteger32

Constraints:
range: 0-30

.1.3.6.1.4.1.244.1.1.2.14.2.1.7

slcServSiteLocalIP

For PPP connections, the local IP Address - all zeros if it
should be negotiated.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.244.1.1.2.14.2.1.8

slcServSiteRemoteIP

For PPP connections, the remote IP Address - all zeros if it
should be negotiated.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.244.1.1.2.14.2.1.9

slcServSiteStaticRouteIP

For Dial-on-Demand PPP connections, the static route
IP Address for the remote network.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.244.1.1.2.14.2.1.10

slcServSiteStaticRouteMask

For Dial-on-Demand PPP connections, the static route
subnet mask for the remote network.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.244.1.1.2.14.2.1.11

slcServSiteStaticRouteGateway

For Dial-on-Demand PPP connections, the static route
gateway for the remote network.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.244.1.1.2.14.2.1.12

slcServSiteDialoutNum

The phone number to use for dial-out connections.

OctetString

.1.3.6.1.4.1.244.1.1.2.14.2.1.13

slcServSiteDialoutLogin

For dial-out connections, the login to use for authenticating
to the remote peer; or on dial-in, the login to use if the
remote peer requests authentication (for example, a two way
CHAP handshake).

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.244.1.1.2.14.2.1.14

slcServSiteDialback

If enabled, the site has permission to use modem dialback.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.2.14.2.1.15

slcServSiteDialbackNum

The phone number to use for dial-back connections.

OctetString

.1.3.6.1.4.1.244.1.1.2.14.2.1.16

slcServSiteDialbackDelay

For Dial-back, specifies the delay between the dial-in and
dial-out portion of the dialing sequence.

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.2.14.2.1.17

slcServSiteIdleTimeout

The timeout (in seconds) for dial-in and dial-on-demand PPP
connections. If no traffic is received for the PPP connection
in the time defined by the idle timeout, the PPP connection
will be terminated. A value of 0…

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.2.14.2.1.18

slcServSiteRestartDelay

The delay (in seconds) to wait before restarting dial-out or
dial-on-demand PPP connections.

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.2.14.2.1.19

slcServSiteCBCPServerAllowNoCallback

If enabled, the SLC will allow the PPP peer to select the
No Callback option during CBCP negotiation.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.2.14.2.1.20

slcServSiteNATState

If enabled, use NAT (Network Address Translation) to allow
dial-in and dial-back users to access the network connected
to Eth1 and Eth2.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.2.14.2.1.21

slcServSiteDialbackRetries

For Dial-back, specifies the number of times the SLC will
retry the dial-out portion of the dialing sequence if the
first attempt to dial-out fails.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.2.14.2.1.22

slcAuthLocalUsersTable

table

.1.3.6.1.4.1.244.1.1.3.1.2 · 1 row entry · 16 columns

Open in standard view

Table of Local Users entries.  The number of entries 
is given by the value of slcAuthLocalNumber.

slcAuthLocalUserEntry entry .1.3.6.1.4.1.244.1.1.3.1.2.1

An entry containing a Local Users and it's attributes.

Indexes

slcAuthLocalUserIndex

Column Syntax OID

slcAuthLocalUserIndex

Reference index for each Local User.

Integer32

Constraints:
range: 1-128

.1.3.6.1.4.1.244.1.1.3.1.2.1.1

slcAuthLocalUserLogin

The login for the Local User. If the user account is locked
(cannot login), the login is appended with a '*' character.

OctetString

Constraints:
range: 0-33

.1.3.6.1.4.1.244.1.1.3.1.2.1.2

slcAuthLocalUserUID

The unique user identifier number for the Local User.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.244.1.1.3.1.2.1.3

slcAuthLocalUserListenPorts

The Device Ports and PC Card slots/USB ports which the Local
User has permission to access via 'connect listen'.

OctetString

.1.3.6.1.4.1.244.1.1.3.1.2.1.4

slcAuthLocalUserDataPorts

The Device Ports and PC Card slots/USB ports which the Local
User has permission to access via 'connect direct'.

OctetString

.1.3.6.1.4.1.244.1.1.3.1.2.1.5

slcAuthLocalUserClearPorts

The Device Ports and PC Card slots/USB ports which the Local
User has permission to clear.

OctetString

.1.3.6.1.4.1.244.1.1.3.1.2.1.6

slcAuthLocalUserEscapeSeq

The character sequence which the Local User uses to terminate
connections to Device Ports.

OctetString

.1.3.6.1.4.1.244.1.1.3.1.2.1.7

slcAuthLocalUserBreakSeq

The character sequence which the Local User uses to send a
break sequence.

OctetString

.1.3.6.1.4.1.244.1.1.3.1.2.1.8

slcAuthLocalUserMenu

The custom user menu defined for the Local User. If this is
empty, there is no menu defined for the Local User. The menu
name is followed by a slash '/' character and either a 'y' if
the menu is automatically displ…

OctetString

.1.3.6.1.4.1.244.1.1.3.1.2.1.9

slcAuthLocalUserDialback

If enabled, the Local User has permission to use modem dialback.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.3.1.2.1.10

slcAuthLocalUserDialbackNum

The dialback number defined for the Local User.

OctetString

.1.3.6.1.4.1.244.1.1.3.1.2.1.11

slcAuthLocalUserGroup

The group assigned to the Local User.

UserGroup

Textual Convention: UserGroup Enumeration

Type Values:

1	default
2	power
3	administrators
4	custom

.1.3.6.1.4.1.244.1.1.3.1.2.1.12

slcAuthLocalUserRights

The rights assigned to the Local User.

UserRights

Textual Convention: UserRights OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.244.1.1.3.1.2.1.13

slcAuthLocalUserPwdExpires

If enabled, the local user's password will expire.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.3.1.2.1.14

slcAuthLocalUserChangePwd

If enabled, the local user can change their password.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.3.1.2.1.15

slcAuthLocalUserChangePwdNextLogin

If enabled, the local user must change their password at
their next login.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.3.1.2.1.16

slcAuthRADIUSServerTable

table

.1.3.6.1.4.1.244.1.1.3.4.4 · 1 row entry · 4 columns

Open in standard view

Table of RADIUS servers.

slcAuthRADIUSServerEntry entry .1.3.6.1.4.1.244.1.1.3.4.4.1

An entry containing a RADIUS server and it's parameters.

Indexes

slcAuthRADIUSServerIndex

Column	Syntax	OID
slcAuthRADIUSServerIndex Reference index for each RADIUS server.	Integer32 Constraints: `range: 1-2`	`.1.3.6.1.4.1.244.1.1.3.4.4.1.1`
slcAuthRADIUSServer The IPv4 Address of the RADIUS server.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.244.1.1.3.4.4.1.2`
slcAuthRADIUSPort The RADIUS Server TCP Port Number.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.244.1.1.3.4.4.1.3`
slcAuthRADIUSServerIPv6 The IPv6 Address of the RADIUS server.	IPV6-TCIpv6Address Textual Convention: IPV6-TCIpv6Address `OctetString` Type Constraints: `range: 16`	`.1.3.6.1.4.1.244.1.1.3.4.4.1.4`

slcAuthRemoteUsersTable

table

.1.3.6.1.4.1.244.1.1.3.7.2 · 1 row entry · 13 columns

Open in standard view

Table of Remote Users entries.  The number of entries 
is given by the value of slcAuthRemoteNumber.

slcAuthRemoteUserEntry entry .1.3.6.1.4.1.244.1.1.3.7.2.1

An entry containing a Remote User and its attributes.

Indexes

slcAuthRemoteUserIndex

Column Syntax OID

slcAuthRemoteUserIndex

Reference index for each Remote User.

Integer32

Constraints:
range: 1-128

.1.3.6.1.4.1.244.1.1.3.7.2.1.1

slcAuthRemoteUserLogin

The login for the Remote User.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.244.1.1.3.7.2.1.2

slcAuthRemoteUserGroup

The group assigned to the Remote User.

UserGroup

Textual Convention: UserGroup Enumeration

Type Values:

1	default
2	power
3	administrators
4	custom

.1.3.6.1.4.1.244.1.1.3.7.2.1.3

slcAuthRemoteUserRights

The rights assigned to the Remote User.

UserRights

Textual Convention: UserRights OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.244.1.1.3.7.2.1.4

slcAuthRemoteUserListenPorts

The Device Ports and PC Card slots/USB ports which the Remote
User has permission to access via 'connect listen'.

OctetString

.1.3.6.1.4.1.244.1.1.3.7.2.1.5

slcAuthRemoteUserDataPorts

The Device Ports and PC Card slots/USB ports which the Remote
User has permission to access via 'connect direct'.

OctetString

.1.3.6.1.4.1.244.1.1.3.7.2.1.6

slcAuthRemoteUserClearPorts

The Device Ports and PC Card slots/USB ports which the Remote
User has permission to clear.

OctetString

.1.3.6.1.4.1.244.1.1.3.7.2.1.7

slcAuthRemoteUserEscapeSeq

The character sequence which the Remote User uses to terminate
connections to Device Ports.

OctetString

.1.3.6.1.4.1.244.1.1.3.7.2.1.8

slcAuthRemoteUserBreakSeq

The character sequence which the Remote User uses to send a
break sequence.

OctetString

.1.3.6.1.4.1.244.1.1.3.7.2.1.9

slcAuthRemoteUserMenu

The custom user menu defined for the Remote User. If this is
empty, there is no menu defined for the Remote User. The menu
name is followed by a slash '/' character and either a 'y' if
the menu is automatically dis…

OctetString

.1.3.6.1.4.1.244.1.1.3.7.2.1.10

slcAuthRemoteUserLocked

If enabled, the Remote User's account is locked (blocked).

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.3.7.2.1.11

slcAuthRemoteUserDialback

If enabled, the Remote User has permission to use modem dialback.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.3.7.2.1.12

slcAuthRemoteUserDialbackNum

The dialback number defined for the Remote User.

OctetString

.1.3.6.1.4.1.244.1.1.3.7.2.1.13

slcAuthGroupsTable

table

.1.3.6.1.4.1.244.1.1.3.8.2 · 1 row entry · 11 columns

Open in standard view

Table of Groups entries.  The number of entries 
is given by the value of slcAuthGroupsNumber.

slcAuthGroupEntry entry .1.3.6.1.4.1.244.1.1.3.8.2.1

An entry containing a Remote User and its attributes.

Indexes

slcAuthGroupIndex

Column Syntax OID

slcAuthGroupIndex

Reference index for each Group.

Integer32

Constraints:
range: 1-128

.1.3.6.1.4.1.244.1.1.3.8.2.1.1

slcAuthGroupName

The name for the Group.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.244.1.1.3.8.2.1.2

slcAuthGroupRights

The rights assigned to the Group.

UserRights

Textual Convention: UserRights OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.244.1.1.3.8.2.1.3

slcAuthGroupListenPorts

The Device Ports and PC Card slots/USB ports which the Group
has permission to access via 'connect listen'.

OctetString

.1.3.6.1.4.1.244.1.1.3.8.2.1.4

slcAuthGroupDataPorts

The Device Ports and PC Card slots/USB ports which the Group
has permission to access via 'connect direct'.

OctetString

.1.3.6.1.4.1.244.1.1.3.8.2.1.5

slcAuthGroupClearPorts

The Device Ports and PC Card slots/USB ports which the Group
has permission to clear.

OctetString

.1.3.6.1.4.1.244.1.1.3.8.2.1.6

slcAuthGroupEscapeSeq

The character sequence which the Group uses to terminate
connections to Device Ports.

OctetString

.1.3.6.1.4.1.244.1.1.3.8.2.1.7

slcAuthGroupBreakSeq

The character sequence which the Group uses to send a
break sequence.

OctetString

.1.3.6.1.4.1.244.1.1.3.8.2.1.8

slcAuthGroupMenu

The custom user menu defined for the Group. If this is
empty, there is no menu defined for the Group. The menu
name is followed by a slash '/' character and either a 'y' if
the menu is automatically displayed at lo…

OctetString

.1.3.6.1.4.1.244.1.1.3.8.2.1.9

slcAuthGroupDialback

If enabled, the Group has permission to use modem dialback.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.3.8.2.1.10

slcAuthGroupDialbackNum

The dialback number defined for the Group.

OctetString

.1.3.6.1.4.1.244.1.1.3.8.2.1.11

slcDevPortCfgTable

table

.1.3.6.1.4.1.244.1.1.4.2.2.2 · 1 row entry · 120 columns

Open in standard view

Table for managing Device Port configuration.  The number of 
entries is given by the value of slcDevPortCfgNumber.

slcDevPortCfgEntry entry .1.3.6.1.4.1.244.1.1.4.2.2.2.1

An entry containing all configuration settings for a Device Port.

Indexes

slcDevPortId

Column Syntax OID

slcDevPortId

The identifier for a Device Port.

Integer32

Constraints:
range: 1-48

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.1

slcDevPortCfgName

The name of the Device Port.

OctetString

Constraints:
range: 1-30

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.2

slcDevPortCfgDevice

The device that is connected to the Device Port. The 'slp*'
and 'servertech' values are deprecated and have been replaced
by the RPM functionality.

Enumeration

Enumerated Values:

1	none
2	slp8
3	slp16
4	slp8Exp8
5	slp8Exp16
6	slp16Exp8
7	slp16Exp16
8	sensorsoft
9	servertech
10	rpm

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.3

slcDevPortCfgDevLogin

The login used to authenticate to the device connected
to the Device Port.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.4

slcDevPortCfgBreakSeq

The character sequence for the Device Port to send a break.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.5

slcDevPortCfgTelnetState

If enabled, Telnet connections to the Device Port are allowed.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.6

slcDevPortCfgTelnetPort

TCP Port number for Telnet in connections.

Integer32

Constraints:
range: 1025-65535

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.7

slcDevPortCfgTelnetAuth

If enabled, the user is required to authenticate to access
a Device Port with Telnet.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.8

slcDevPortCfgSSHState

If enabled, SSH connections to the Device Port are allowed.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.9

slcDevPortCfgSSHPort

TCP Port number for SSH in connections.

Integer32

Constraints:
range: 1025-65535

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.10

slcDevPortCfgSSHAuth

If enabled, the user is required to authenticate to access
a Device Port with SSH.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.11

slcDevPortCfgTCPState

If enabled, TCP connections to the Device Port are allowed.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.12

slcDevPortCfgTCPPort

TCP Port number for TCP in connections.

Integer32

Constraints:
range: 1025-65535

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.13

slcDevPortCfgTCPAuth

If enabled, the user is required to authenticate to access
a Device Port with TCP.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.14

slcDevPortCfgIP

The IP Address for Telnet, SSH or TCP in to a Device Port.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.15

slcDevPortCfgBaud

The baud rate of the Device Port.

Integer32

Constraints:
range: 300-300
range: 600-600
range: 1200-1200
range: 2400-2400
range: 4800-4800
range: 9600-9600
range: 19200-19200
range: 38400-38400
range: 57600-57600
range: 115200-115200

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.16

slcDevPortCfgDataBits

The data bits of the Device Port.

Integer32

Constraints:
range: 7-8

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.17

slcDevPortCfgStopBits

The stop bits of the Device Port.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.18

slcDevPortCfgParity

The parity of the Device Port.

Enumeration

Enumerated Values:

1	none
2	odd
3	even

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.19

slcDevPortCfgFlowControl

The flow control of the Device Port.

Enumeration

Enumerated Values:

1	none
2	xonxoff
3	rtscts

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.20

slcDevPortCfgLogins

If enabled, authentication is required to access a serial
device connected to a Device Port.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.21

slcDevPortCfgConnectDSR

If enabled, the Device Port only establishes a connection if
DSR (Data Set Ready) transitions to an asserted state.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.22

slcDevPortCfgDisconnectDSR

If enabled, and a connection to a Device Port is currently
in session, the connection will be terminated if DSR (Data
Set Ready) transitions to a de-asserted state.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.23

slcDevPortCfgModemState

For an external modem attached to the Device Port, indicates
how the modem will be used.

Enumeration

Enumerated Values:

1	disabled
2	dialout
3	dialin
4	dialback
5	dialondemand
6	dialinAndDialondemand
7	dialinHostList
8	cbcpServer
9	cbcpClient

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.24

slcDevPortCfgModemMode

For an external modem attached to the Device Port, the
mode: PPP (for Dial-in and Dial-out) and text (for Dial-in
and Dial-back).

Enumeration

Enumerated Values:

1	ppp
2	text

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.25

slcDevPortCfgLocalIP

For PPP connections, the local IP Address - all zeros if it
should be negotiated.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.26

slcDevPortCfgRemoteIP

For PPP connections, the remote IP Address - all zeros if it
should be negotiated.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.27

slcDevPortCfgAuth

For PPP connections, the type of authentication to be used.

Enumeration

Enumerated Values:

1	pap
2	chap

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.28

slcDevPortCfgCHAPHost

For PPP connections with CHAP authentication, the host (for
Unix) or user (for Windows) to use.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.29

slcDevPortCfgInitScript

The initialization script for an external modem.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.30

slcDevPortCfgTimeout

The timeout (in minutes) for text connections. A value
of 0 indicates that timeouts are disabled.

minutesInteger32

Constraints:
range: 0-30

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.31

slcDevPortCfgDialoutNum

The phone number to use for dial-out connections.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.32

slcDevPortCfgDialoutLogin

The login to use for dial-out connections.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.33

slcDevPortCfgDialbackMode

For dial-back connections, defines the phone number to call:
a number associated with the authenticated user, or a fixed
number associated with the Device Port.

Enumeration

Enumerated Values:

1	usernumber
2	fixed

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.34

slcDevPortCfgDialbackNum

The phone number to use for dial-back connections.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.35

slcDevPortCfgNATState

If enabled, use NAT (Network Address Translation) to allow
dial-in and dial-back users to access the network connected
to Eth1 and Eth2.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.36

slcDevPortCfgLocalState

If enabled, local logging is enabled for the Device Port.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.37

slcDevPortCfgNFSFileState

If enabled, NFS File logging is enabled for the Device Port.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.38

slcDevPortCfgNFSDir

The local directory of a NFS mount to use for logging.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.39

slcDevPortCfgNFSMaxFiles

The maximum number of files to use for NFS file logging.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.40

slcDevPortCfgNFSMaxSize

The maximum size of each file (in bytes) for NFS File logging.

bytesSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.41

slcDevPortCfgEmailState

If enabled, Token and Data Detection (previously called
'Email Logging') is enabled for the Device Port.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.42

slcDevPortCfgEmailTrigger

The type of trigger to use for Token and Data Detection
(previously called 'Email Logging') - number of data bytes
received, or token/character string received.

Enumeration

Enumerated Values:

1	bytecnt
2	textstring

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.43

slcDevPortCfgEmailByteThresh

When Token and Data Detection (previously called 'Email
Logging') is configured to trigger on a data byte count,
the number of bytes required to trigger an action.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.44

slcDevPortCfgEmailDelay

For Token and Data Detection (previously called 'Email
Logging'), a time limit of how long the device port will
capture data after the data trigger is detected and before
closing the log file and performing the selec…

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.45

slcDevPortCfgEmailRestartDelay

For Token and Data Detection (previously called 'Email
Logging'), the period of time, after performing the
selected actions, during which the device port will ignore
additional characters received.

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.46

slcDevPortCfgEmailTextString

When Token and Data Detection (previously called 'Email
Logging') is configured to trigger on a character string,
this defines the character string that will trigger an action.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.47

slcDevPortCfgEmailTo

For Token and Data Detection (previously called 'Email
Logging'), if the Email action is enabled, this object
defines the list of emails to send email notification to.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.48

slcDevPortCfgEmailSubject

For Token and Data Detection (previously called 'Email
Logging'), if the Email action is enabled, this object
defines the subject to include with email notification.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.49

slcDevPortCfgPCCardState

If enabled, PC Card logging is enabled for the Device Port.
This value will be undefined if the SLC does not have PC Card
slots.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.50

slcDevPortCfgPCCardLogTo

For PC Card logging, which PC Card slot to use for logging.
This value will be undefined if the SLC does not have PC Card
slots.

Enumeration

Enumerated Values:

1	upperSlot
2	lowerSlot

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.51

slcDevPortCfgPCCardMaxFiles

The maximum number of files to use for PC Card logging.
This value will be undefined if the SLC does not have PC Card
slots.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.52

slcDevPortCfgPCCardMaxSize

The maximum size of each file (in bytes) for PC Card logging.
This value will be undefined if the SLC does not have PC Card
slots.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.53

slcDevPortCfgAction

Performs an action on a Device Port. A read of this object
always returns the value noAction(1). Setting this object
to zeroPortCounters(2) will reset all port counters given in
slcDevPortStateTable. Setting this …

Enumerationr/w

Enumerated Values:

1	noAction
2	zeroPortCounters
3	clearLocalLog
4	terminateConnections

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.54

slcDevPortCfgEmailSend

When a trigger is received, the type of notification to send:
email, SNMP trap, or email and SNMP trap. This object is
deprecated; instead refer to slcDevPortCfgTokenAction.

Enumeration

Enumerated Values:

1	email
2	snmptrap
3	both

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.55

slcDevPortCfgBanner

The banner displayed when the Device Port is connected to via
SSH or Telnet.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.56

slcDevPortCfgIdleTimeout

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.57

slcDevPortCfgRestartDelay

The delay (in seconds) to wait before restarting dial-out or
dial-on-demand PPP connections.

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.58

slcDevPortCfgCallerIdLogging

If enabled, caller id logging is enabled for a modem dial-in
connection.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.59

slcDevPortCfgCallerIdATCmd

The modem AT command required to initiate caller id logging
by the modem.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.60

slcDevPortCfgDODAuth

For PPP connections that are configured for both Dial-in and
Dial-on-Demand, the type of authentication to be used for
Dial-on-Demand.

Enumeration

Enumerated Values:

1	pap
2	chap

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.61

slcDevPortCfgDODCHAPHost

For PPP connections that are configured for both Dial-in and
Dial-on-Demand, with CHAP authentication for Dial-on-Demand,
the host (for Unix) or user (for Windows) to use.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.62

slcDevPortCfgSLMLoggingState

If enabled, SLM logging is enabled for the Device Port.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.63

slcDevPortCfgSLMNMS

The IP Addresses of up to three SNMP Network Management
Stations defined used for SLM Logging. Multiple IP Addresses
will be separated by a comma.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.64

slcDevPortCfgSLMByteThresh

The number of bytes required to trigger SLM logging.

bytesSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.65

slcDevPortCfgSLMTimeFrame

The time frame for SLM logging, in seconds.

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.66

slcDevPortCfgWebColumns

The number of columns in the Web SSH or Telnet window for
this Device Port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.67

slcDevPortCfgWebRows

The number of rows in the Web SSH or Telnet window for
this Device Port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.68

slcDevPortCfgSyslogState

If enabled, Syslog logging is enabled for the Device Port.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.69

slcDevPortCfgHostList

When slcDevPortCfgModemState is set to dialinHostList, the
name of the Host List used for Dial-in.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.70

slcDevPortCfgDevLowTemp

The low temperature limit, in Celsius, for the device
connected to this Device Port. If the temperature is not
applicable, 9999 will be returned.

CelsiusSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.71

slcDevPortCfgDevHighTemp

The high temperature limit, in Celsius, for the device
connected to this Device Port. If the temperature is not
applicable, 9999 will be returned.

CelsiusSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.72

slcDevPortCfgDevTemperature

The actual temperature, in Celsius, for the device
connected to this Device Port. If the temperature is not
applicable, an empty string will be returned.

CelsiusOctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.73

slcDevPortCfgDevLowHumidity

The low humidty limit, in percentage, for the device
connected to this Device Port. If the temperature is not
applicable, 9999 will be returned.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.74

slcDevPortCfgDevHighHumidity

The high humidty limit, in percentage, for the device
connected to this Device Port. If the temperature is not
applicable, 9999 will be returned.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.75

slcDevPortCfgDevHumidity

The actual humidity, in percentage, for the device
connected to this Device Port. If the temperature is not
applicable, an empty string will be returned.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.76

slcDevPortCfgDevTraps

If enabled, traps will be sent when one of the limits for the
device connected to this Device Port are exceeded.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.77

slcDevPortCfgShowLines

If enabled, upon connecting to the Device Port, a series of
characters (or lines) output to the Device Port before it
was connected to are displayed.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.78

slcDevPortCfgNumberShowLines

If slcDevPortCfgShowLines is enabled, the number of lines that
are displayed upon connecting to the Device Port.

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.79

slcDevPortCfgViewPortLog

If enabled, upon using 'connect direct' to a Device Port,
the slcDevPortCfgPortLogSeq key sequence can be typed to
view the end of the port log for the current Device Port,
or a different Device Port.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.80

slcDevPortCfgPortLogSeq

The character sequence to view the port log for the Device
Port.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.81

slcDevPortCfgMaxDirectConnects

The maximum number of direct connects at the CLI for the
Device Port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.82

slcDevPortCfgTelnetTimeout

The timeout (in seconds) for Telnet connections. A value
of 0 indicates that timeouts are disabled.

secondsInteger32

Constraints:
range: 0-1800

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.83

slcDevPortCfgSSHTimeout

The timeout (in seconds) for SSH connections. A value
of 0 indicates that timeouts are disabled.

secondsInteger32

Constraints:
range: 0-1800

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.84

slcDevPortCfgTCPTimeout

The timeout (in seconds) for TCP connections. A value
of 0 indicates that timeouts are disabled.

secondsInteger32

Constraints:
range: 0-1800

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.85

slcDevPortCfgCBCPClientType

When slcDevPortCfgModemState is set to cbcpClient, the
preferred type of dialback number to use for CBCP negotiation.

Enumeration

Enumerated Values:

1	adminDefined
2	userDefined

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.86

slcDevPortCfgCBCPServerAllowNoCallback

If enabled and slcDevPortCfgModemState is set to cbcpServer,
the SLC will allow the PPP peer to select the No Callback
option during CBCP negotiation.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.87

slcDevPortCfgDialbackDelay

When slcDevPortCfgModemState is set to dialback or cbcpServer,
specifies the delay between the dial-in and dial-out portion
of the dialing sequence.

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.88

slcDevPortCfgUSBState

If enabled, USB logging is enabled for the Device Port. This
value will be undefined if the SLC does not have USB Ports.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.89

slcDevPortCfgUSBLogTo

For USB logging, which USB port to use for logging. This
value will be undefined if the SLC does not have USB Ports.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.90

slcDevPortCfgUSBMaxFiles

The maximum number of files to use for USB logging. This
value will be undefined if the SLC does not have USB Ports.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.91

slcDevPortCfgUSBMaxSize

The maximum size of each file (in bytes) for USB logging. This
value will be undefined if the SLC does not have USB Ports.

bytesSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.92

slcDevPortCfgCHAPAuthLocalUsers

If enabled, the local user list (login and password) is used
to validate the CHAP host and secret sent by a remote PPP
peer for CHAP authentication, instead of using the CHAP host
and secret associated with a modem.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.93

slcDevPortCfgUseSites

If enabled, sites (a set of site-oriented modem parameters
that can be activated by various modem-related events such
as authentication, outbound traffic for Dial-on-demand
connections, etc.) will be used instead of …

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.94

slcDevPortCfgDialbackRetries

When slcDevPortCfgModemState is set to dialback or cbcpServer,
specifies the number of times the SLC will retry the dial-out
portion of the dialing sequence if the first attempt to
dial-out fails.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.95

slcDevPortCfgGroup

The group or groups that may access the Device Port.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.96

slcDevPortCfgIPMask

The network mask associated with slcDevPortCfgIPMask.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.97

slcDevPortCfgDevPrompt

If the device port is connected to a SLP or ServerTech CDU,
specifies the prompt that is configured for the SLP or
ServerTech CDU. This object is deprecated, and has been
replaced by the RPM functionality.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.98

slcDevPortCfgDevNumOutlets

If the device port is connected to a ServerTech CDU, specifies
the number of outlets on the primary/master ServerTech unit.
This object is deprecated, and has been replaced by the RPM
functionality.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.99

slcDevPortCfgDevNumExpOutlets

If the device port is connected to a ServerTech CDU, specifies
the number of outlets on the expansion ServerTech unit. This
object is deprecated, and has been replaced by the RPM
functionality.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.100

slcDevPortCfgReversePinout

If enabled, swaps the positions of the serial lines, such
that the direction of data or the signal is reversed.
For instance, TX is swapped with RX. Enabling Reverse
Pinout facilitates connections to Cisco and Sun …

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.101

slcDevPortCfgUSBVBUS

For SLC8000 USB Device Ports only. If enabled, the USB VBUS
signal provides power to the USB device attached to a device
port. Disabling VBUS will power down the device as long as it
is bus-powered instead of self-po…

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.102

slcDevPortCfgAssertDTR

For RJ45 Device Ports only. By default, DTR is asserted on a
device port nearly all of the time (except momentarily when a
port is opened for operations). Unchecking this option will
deassert DTR, simulating a cable…

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.103

slcDevPortCfgPortType

Indicates the connector type on the device port: RJ45 or USB.

Enumeration

Enumerated Values:

1	rj45
2	usb

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.104

slcDevPortCfgTelnetTimeoutDataDirection

If slcDevPortCfgTelnetTimeout is enabled, this setting
indicates the direction of data used to determine if the
connection has timed out.

TimeoutDataDirection

Textual Convention: TimeoutDataDirection Enumeration

Type Values:

1	incomingNetwork
2	outgoingNetwork
3	bothDirections

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.105

slcDevPortCfgSSHTimeoutDataDirection

If slcDevPortCfgSSHTimeout is enabled, this setting indicates
the direction of data used to determine if the connection has
timed out.

TimeoutDataDirection

Textual Convention: TimeoutDataDirection Enumeration

Type Values:

1	incomingNetwork
2	outgoingNetwork
3	bothDirections

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.106

slcDevPortCfgTCPTimeoutDataDirection

If slcDevPortCfgTCPTimeout is enabled, this setting indicates
the direction of data used to determine if the connection has
timed out.

TimeoutDataDirection

Textual Convention: TimeoutDataDirection Enumeration

Type Values:

1	incomingNetwork
2	outgoingNetwork
3	bothDirections

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.107

slcDevPortCfgIdleTimeoutMessage

If enabled, a message will be displayed to a user when their
connection to a device port will be terminated soon due to
the connection being idle.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.108

slcDevPortCfgNumberOfSessionsMessage

If enabled, a message will be displayed to a user when
connecting to a device port that indicates how many users
are currently connected to the device port.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.109

slcDevPortCfgMinimizeLatency

If enabled, device port latency will be minimized by
reducing read delays.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.110

slcDevPortCfgTelnetSoftIAC

If enabled, the Telnet server will not block waiting for
the initial Telnet protocol IAC option responses.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.111

slcDevPortCfgSendTermString

If enabled, and a slcDevPortCfgTerminationString is defined,
when a network connection to a device port is terminated, the
termination string is sent to the device connected to the
device port. The string should be …

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.112

slcDevPortCfgTerminationString

The termination string sent to the device connected to the
device port if slcDevPortCfgSendTermString is enabled.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.113

slcDevPortCfgPowerManagementSeq

The key sequence that displays the Power Management menu
when a user is connected to a device port.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.114

slcDevPortCfgPowerSupplies

A string that describes the managed power supplies configured
for the device port. A device port can have up to four power
supplies that provide power for the device connected to the
device port. The string is a com…

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.115

slcDevPortCfgToggleDTR

Applies to RJ45 device ports only. If enabled, when a user
disconnects from a device port, DTR will be toggled. This
feature can be used when a serial connection requires DSR to
be active for the attached device t…

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.116

slcDevPortCfgTokenAction

For Token and Data Detection, a string containing one or more
actions that will be performed if a data trigger occurs:
syslog, email, trap, sendstring, powersupply.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.117

slcDevPortCfgTokenSendString

For Token and Data Detection (previously called 'Email
Logging'), if the Send String action is enabled, this object
defines the string to send to the device connected to the
device port.

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.118

slcDevPortCfgTokenPowerSupply

For Token and Data Detection (previously called 'Email
Logging'), if the Control Power Supply action is enabled,
this object defines the name of the managed power supply to
perform an action on. This string can be 'a…

OctetString

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.119

slcDevPortCfgTokenPowerAction

For Token and Data Detection (previously called 'Email
Logging'), if the Control Power Supply action is enabled,
this object defines the action to take on
slcDevPortCfgTokenPowerSupply.

Enumeration

Enumerated Values:

1	turnOff
2	turnOn
3	cyclePower

.1.3.6.1.4.1.244.1.1.4.2.2.2.1.120

slcDevPortStateTable

table

.1.3.6.1.4.1.244.1.1.4.2.3.2 · 1 row entry · 12 columns

Open in standard view

Table of Device Port state entries.  The number of 
entries is given by the value of slcDevPortStateNumber.

slcDevPortStateEntry entry .1.3.6.1.4.1.244.1.1.4.2.3.2.1

An entry containing all state information for a Device Port.

Indexes

slcDevPortStateIndex

Column Syntax OID

slcDevPortStateIndex

Reference index for each Device Port State entry.

Integer32

Constraints:
range: 1-48

.1.3.6.1.4.1.244.1.1.4.2.3.2.1.1

slcDevPortStateBytesInput

The number of bytes input to the Device Port since boot or
the last time Device Port statistics were zeroed.

bytesSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.3.2.1.2

slcDevPortStateBytesOutput

The number of bytes output from the Device Port since boot or
the last time Device Port statistics were zeroed.

bytesSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.3.2.1.3

slcDevPortStateFramingErrors

The number of framing errors for the Device Port since boot or
the last time Device Port statistics were zeroed.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.3.2.1.4

slcDevPortStateParityErrors

The number of parity errors for the Device Port since boot or
the last time Device Port statistics were zeroed.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.3.2.1.5

slcDevPortStateOverrunErrors

The number of overrun errors for the Device Port since boot or
the last time Device Port statistics were zeroed.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.3.2.1.6

slcDevPortStateFlowControlViolations

The number of flow control violations for the Device Port
since boot or the last time Device Port statistics were
zeroed.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.2.3.2.1.7

slcDevPortStateDSR

If enabled, Data Set Ready is enabled for the Device Port.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.3.2.1.8

slcDevPortStateDTR

If enabled, Data Terminal Ready is enabled for the Device Port.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.3.2.1.9

slcDevPortStateCTS

If enabled, Clear To Send is enabled for the Device Port.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.3.2.1.10

slcDevPortStateRTS

If enabled, Request To Send is enabled for the Device Port.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.3.2.1.11

slcDevPortStateCD

If enabled, Carrier Detect is enabled for the Device Port.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.2.3.2.1.12

slcPCCardCfgTable

table

.1.3.6.1.4.1.244.1.1.4.3.1 · 1 row entry · 54 columns

Open in standard view

Table of PC Card configuration entries.  There are two entries 
in the table, index (1) for the upper PC Card slot, and index 
(2) for the lower PC Card slot.  This table will be empty if 
the SLC does not have PC Card slots.

slcPCCardCfgEntry entry .1.3.6.1.4.1.244.1.1.4.3.1.1

An entry containing all configuration settings for a PC Card Slot.

Indexes

slcPCCardCfgIndex

Column Syntax OID

slcPCCardCfgIndex

Reference index for each PC Card Configuration entry.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.244.1.1.4.3.1.1.1

slcPCCardCfgCardType

The type of PC Card in the slot.

Enumeration

Enumerated Values:

1	none
2	storage
3	modem
4	isdn
5	wireless
6	gsmmodem

.1.3.6.1.4.1.244.1.1.4.3.1.1.2

slcPCCardCfgCardId

The identifying string of the card in the slot.

OctetString

.1.3.6.1.4.1.244.1.1.4.3.1.1.3

slcPCCardCfgBaud

For ISDN and modem cards, the baud rate.

Integer32

.1.3.6.1.4.1.244.1.1.4.3.1.1.4

slcPCCardCfgDataBits

For ISDN and modem cards, the data bits.

Integer32

Constraints:
range: 7-8

.1.3.6.1.4.1.244.1.1.4.3.1.1.5

slcPCCardCfgStopBits

For ISDN and modem cards, the stop bits.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.244.1.1.4.3.1.1.6

slcPCCardCfgParity

For ISDN and modem cards, the parity.

Enumeration

Enumerated Values:

1	none
2	odd
3	even

.1.3.6.1.4.1.244.1.1.4.3.1.1.7

slcPCCardCfgFlowControl

For ISDN and modem cards, the flow control.

Enumeration

Enumerated Values:

1	none
2	xonxoff
3	rtscts

.1.3.6.1.4.1.244.1.1.4.3.1.1.8

slcPCCardCfgModemState

For ISDN and modem cards, indicates how the modem will be used.

Enumeration

Enumerated Values:

1	disabled
2	dialout
3	dialin
4	dialback
5	dialondemand
6	dialinAndDialondemand
7	dialinHostList
8	cbcpServer
9	cbcpClient

.1.3.6.1.4.1.244.1.1.4.3.1.1.9

slcPCCardCfgModemMode

For ISDN and modem cards, the mode: PPP (for Dial-in and
Dial-out) and text (for Dial-in and Dial-back).

Enumeration

Enumerated Values:

1	ppp
2	text

.1.3.6.1.4.1.244.1.1.4.3.1.1.10

slcPCCardCfgLocalIP

For PPP connections, the local IP Address (all zeros if it
should be negotiated).

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.244.1.1.4.3.1.1.11

slcPCCardCfgRemoteIP

For PPP connections, the remote IP Address (all zeros if it
should be negotiated).

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.244.1.1.4.3.1.1.12

slcPCCardCfgAuth

For PPP connections, the type of authentication to be used.

Enumeration

Enumerated Values:

1	pap
2	chap

.1.3.6.1.4.1.244.1.1.4.3.1.1.13

slcPCCardCfgCHAPHost

For PPP connections with CHAP authentication, the host (for
Unix) or user (for Windows) to use.

OctetString

.1.3.6.1.4.1.244.1.1.4.3.1.1.14

slcPCCardCfgInitScript

The initialization script for an external modem.

OctetString

.1.3.6.1.4.1.244.1.1.4.3.1.1.15

slcPCCardCfgTimeout

The timeout (in minutes) for text connections. A value
of 0 indicates that timeouts are disabled.

minutesInteger32

Constraints:
range: 0-30

.1.3.6.1.4.1.244.1.1.4.3.1.1.16

slcPCCardCfgDialoutNum

The phone number to use for dial-out connections.

OctetString

.1.3.6.1.4.1.244.1.1.4.3.1.1.17

slcPCCardCfgDialoutLogin

The login to use for dial-out connections.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.244.1.1.4.3.1.1.18

slcPCCardCfgDialbackMode

For dial-back connections, defines the phone number to call:
a number associated with the authenticated user, or a fixed
number associated with the Device Port.

Enumeration

Enumerated Values:

1	usernumber
2	fixed

.1.3.6.1.4.1.244.1.1.4.3.1.1.19

slcPCCardCfgDialbackNum

The phone number to use for dial-back connections.

OctetString

.1.3.6.1.4.1.244.1.1.4.3.1.1.20

slcPCCardCfgNATState

If enabled, use NAT (Network Address Translation) to allow
dial-in and dial-back users to access the network connected
to Eth1 and Eth2.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.3.1.1.21

slcPCCardCfgStorageFS

For storage cards, the type of filesystem on the card.

Enumeration

Enumerated Values:

1	notmounted
2	ext2
3	fat

.1.3.6.1.4.1.244.1.1.4.3.1.1.22

slcPCCardCfgISDNChannel

The channel on the ISDN card to use, either 1 or 2.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.3.1.1.23

slcPCCardCfgISDNChannelNum

The phone number associated with the selected ISDN channel.

OctetString

.1.3.6.1.4.1.244.1.1.4.3.1.1.24

slcPCCardCfgTelnetState

If enabled, Telnet connections to the modem/ISDN PC Card
are allowed.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.3.1.1.25

slcPCCardCfgTelnetPort

TCP Port number for Telnet connections directly to the
modem/ISDN PC Card.

Integer32

Constraints:
range: 1025-65535

.1.3.6.1.4.1.244.1.1.4.3.1.1.26

slcPCCardCfgTelnetAuth

If enabled, the user is required to authenticate to access
the modem/ISDN PC Card with Telnet.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.3.1.1.27

slcPCCardCfgSSHState

If enabled, SSH connections to the modem/ISDN PC Card
are allowed.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.3.1.1.28

slcPCCardCfgSSHPort

TCP Port number for SSH connections directly to the
modem/ISDN PC Card.

Integer32

Constraints:
range: 1025-65535

.1.3.6.1.4.1.244.1.1.4.3.1.1.29

slcPCCardCfgSSHAuth

If enabled, the user is required to authenticate to access
the modem/ISDN PC Card with SSH.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.3.1.1.30

slcPCCardCfgTCPState

If enabled, TCP connections to the modem/ISDN PC Card
are allowed.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.3.1.1.31

slcPCCardCfgTCPPort

TCP Port number for TCP connections directly to the
modem/ISDN PC Card.

Integer32

Constraints:
range: 1025-65535

.1.3.6.1.4.1.244.1.1.4.3.1.1.32

slcPCCardCfgTCPAuth

If enabled, the user is required to authenticate to access
the modem/ISDN PC Card with TCP.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.3.1.1.33

slcPCCardCfgGSMPIN

The PIN associated with the GSM/GPRS PC Card modem.

OctetString

.1.3.6.1.4.1.244.1.1.4.3.1.1.34

slcPCCardCfgGSMNetworkName obsolete

The Network Name associated with the GSM/GPRS PC Card modem.

OctetString

.1.3.6.1.4.1.244.1.1.4.3.1.1.35

slcPCCardCfgGSMPPPCompression

If enabled, PPP compression is enabled for GSM/GPRS PC Card
modem connections.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.3.1.1.36

slcPCCardCfgGSMAutoAcquireDNS

If enabled, DNS servers will be acquired vi GSM/GPRS PC Card
modem PPP connections.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.3.1.1.37

slcPCCardCfgGSMDialoutMode

The mode to be used for GSM/GPRS PC Card modems configured
for dialout.

Enumeration

Enumerated Values:

1	gprs
2	gsm

.1.3.6.1.4.1.244.1.1.4.3.1.1.38

slcPCCardCfgGSMContextID

The Context Id string used for GSM/GPRS PC Card modems
configured for GPRS dialout mode.

OctetString

.1.3.6.1.4.1.244.1.1.4.3.1.1.39

slcPCCardCfgGSMBearerService

The Bearer Service Type string used for GSM/GPRS PC Card
modems configured for GSM dialin/dialout mode.

OctetString

.1.3.6.1.4.1.244.1.1.4.3.1.1.40

slcPCCardCfgIdleTimeout

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.3.1.1.41

slcPCCardCfgRestartDelay

The delay (in seconds) to wait before restarting dial-out or
dial-on-demand PPP connections.

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.3.1.1.42

slcPCCardCfgCallerIdLogging

If enabled, caller id logging is enabled for a modem dial-in
connection.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.3.1.1.43

slcPCCardCfgCallerIdATCmd

The modem AT command required to initiate caller id logging
by the modem.

OctetString

.1.3.6.1.4.1.244.1.1.4.3.1.1.44

slcPCCardCfgDODAuth

For PPP connections that are configured for both Dial-in and
Dial-on-Demand, the type of authentication to be used for
Dial-on-Demand.

Enumeration

Enumerated Values:

1	pap
2	chap

.1.3.6.1.4.1.244.1.1.4.3.1.1.45

slcPCCardCfgDODCHAPHost

For PPP connections that are configured for both Dial-in and
Dial-on-Demand, with CHAP authentication for Dial-on-Demand,
the host (for Unix) or user (for Windows) to use.

OctetString

.1.3.6.1.4.1.244.1.1.4.3.1.1.46

slcPCCardCfgHostList

When slcPCCardCfgModemState is set to dialinHostList, the
name of the Host List used for Dial-in.

OctetString

.1.3.6.1.4.1.244.1.1.4.3.1.1.47

slcPCCardCfgCBCPClientType

When slcPCCardCfgModemState is set to cbcpClient, the
preferred type of dialback number to use for CBCP negotiation.

Enumeration

Enumerated Values:

1	adminDefined
2	userDefined

.1.3.6.1.4.1.244.1.1.4.3.1.1.48

slcPCCardCfgCBCPServerAllowNoCallback

If enabled and slcPCCardCfgModemState is set to cbcpServer,
the SLC will allow the PPP peer to select the No Callback
option during CBCP negotiation.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.3.1.1.49

slcPCCardCfgDialbackDelay

When slcPCCardCfgModemState is set to dialback or cbcpServer,
specifies the delay between the dial-in and dial-out portion
of the dialing sequence.

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.3.1.1.50

slcPCCardCfgCHAPAuthLocalUsers

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.3.1.1.51

slcPCCardCfgUseSites

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.3.1.1.52

slcPCCardCfgDialbackRetries

When slcPCCardCfgModemState is set to dialback or cbcpServer,
specifies the number of times the SLC will retry the dial-out
portion of the dialing sequence if the first attempt to
dial-out fails.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.3.1.1.53

slcPCCardCfgGroup

The group or groups that may access the PC Card slot.

OctetString

.1.3.6.1.4.1.244.1.1.4.3.1.1.54

slcDevUSBCfgTable

table

.1.3.6.1.4.1.244.1.1.4.5.2 · 1 row entry · 52 columns

Open in standard view

Table of USB configuration entries.  There is one entry in the 
table, index (1) for USB port 1.  This table will be empty if 
the SLC does not have USB Ports.

slcDevUSBCfgEntry entry .1.3.6.1.4.1.244.1.1.4.5.2.1

An entry containing all configuration settings for a USB port.

Indexes

slcDevUSBId

Column Syntax OID

slcDevUSBId

The identifier for a USB Port (1 indicates USB Port U1).

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.244.1.1.4.5.2.1.1

slcDevUSBCfgCardType

The type of USB device in the port.

Enumeration

Enumerated Values:

1	none
2	storage
3	modem
4	isdn
5	wireless
6	gsmmodem

.1.3.6.1.4.1.244.1.1.4.5.2.1.2

slcDevUSBCfgCardId

The identifying string of the device in the port.

OctetString

.1.3.6.1.4.1.244.1.1.4.5.2.1.3

slcDevUSBCfgStorageFS

For thumb drives, the type of filesystem on the card.

Enumeration

Enumerated Values:

1	notmounted
2	ext2
3	fat

.1.3.6.1.4.1.244.1.1.4.5.2.1.4

slcDevUSBCfgBaud

For modem cards, the baud rate.

Integer32

.1.3.6.1.4.1.244.1.1.4.5.2.1.5

slcDevUSBCfgDataBits

For modem cards, the data bits.

Integer32

Constraints:
range: 7-8

.1.3.6.1.4.1.244.1.1.4.5.2.1.6

slcDevUSBCfgStopBits

For modem cards, the stop bits.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.244.1.1.4.5.2.1.7

slcDevUSBCfgParity

For modem cards, the parity.

Enumeration

Enumerated Values:

1	none
2	odd
3	even

.1.3.6.1.4.1.244.1.1.4.5.2.1.8

slcDevUSBCfgFlowControl

For modem cards, the flow control.

Enumeration

Enumerated Values:

1	none
2	xonxoff
3	rtscts

.1.3.6.1.4.1.244.1.1.4.5.2.1.9

slcDevUSBCfgModemState

For modem cards, indicates how the modem will be used.

Enumeration

Enumerated Values:

1	disabled
2	dialout
3	dialin
4	dialback
5	dialondemand
6	dialinAndDialondemand
7	dialinHostList
8	cbcpServer
9	cbcpClient

.1.3.6.1.4.1.244.1.1.4.5.2.1.10

slcDevUSBCfgModemMode

For modem cards, the mode: PPP (for Dial-in and
Dial-out) and text (for Dial-in and Dial-back).

Enumeration

Enumerated Values:

1	ppp
2	text

.1.3.6.1.4.1.244.1.1.4.5.2.1.11

slcDevUSBCfgLocalIP

For PPP connections, the local IP Address (all zeros if it
should be negotiated).

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.244.1.1.4.5.2.1.12

slcDevUSBCfgRemoteIP

For PPP connections, the remote IP Address (all zeros if it
should be negotiated).

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.244.1.1.4.5.2.1.13

slcDevUSBCfgAuth

For PPP connections, the type of authentication to be used.

Enumeration

Enumerated Values:

1	pap
2	chap

.1.3.6.1.4.1.244.1.1.4.5.2.1.14

slcDevUSBCfgCHAPHost

For PPP connections with CHAP authentication, the host (for
Unix) or user (for Windows) to use.

OctetString

.1.3.6.1.4.1.244.1.1.4.5.2.1.15

slcDevUSBCfgDODAuth

For PPP connections that are configured for both Dial-in and
Dial-on-Demand, the type of authentication to be used for
Dial-on-Demand.

Enumeration

Enumerated Values:

1	pap
2	chap

.1.3.6.1.4.1.244.1.1.4.5.2.1.16

slcDevUSBCfgDODCHAPHost

For PPP connections that are configured for both Dial-in and
Dial-on-Demand, with CHAP authentication for Dial-on-Demand,
the host (for Unix) or user (for Windows) to use.

OctetString

.1.3.6.1.4.1.244.1.1.4.5.2.1.17

slcDevUSBCfgInitScript

The initialization script for a modem.

OctetString

.1.3.6.1.4.1.244.1.1.4.5.2.1.18

slcDevUSBCfgTimeout

The timeout (in minutes) for text connections. A value
of 0 indicates that timeouts are disabled.

minutesInteger32

Constraints:
range: 0-30

.1.3.6.1.4.1.244.1.1.4.5.2.1.19

slcDevUSBCfgDialoutNum

The phone number to use for dial-out connections.

OctetString

.1.3.6.1.4.1.244.1.1.4.5.2.1.20

slcDevUSBCfgDialoutLogin

The login to use for dial-out connections.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.244.1.1.4.5.2.1.21

slcDevUSBCfgDialbackMode

For dial-back connections, defines the phone number to call:
a number associated with the authenticated user, or a fixed
number associated with the Device Port.

Enumeration

Enumerated Values:

1	usernumber
2	fixed

.1.3.6.1.4.1.244.1.1.4.5.2.1.22

slcDevUSBCfgDialbackNum

The phone number to use for dial-back connections.

OctetString

.1.3.6.1.4.1.244.1.1.4.5.2.1.23

slcDevUSBCfgDialbackDelay

When slcDevUSBCfgModemState is set to dialback or cbcpServer,
specifies the delay between the dial-in and dial-out portion
of the dialing sequence.

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.5.2.1.24

slcDevUSBCfgNATState

If enabled, use NAT (Network Address Translation) to allow
dial-in and dial-back users to access the network connected
to Eth1 and Eth2.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.5.2.1.25

slcDevUSBCfgIdleTimeout

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.5.2.1.26

slcDevUSBCfgRestartDelay

The delay (in seconds) to wait before restarting dial-out or
dial-on-demand PPP connections.

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.5.2.1.27

slcDevUSBCfgCallerIdLogging

If enabled, caller id logging is enabled for a modem dial-in
connection.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.5.2.1.28

slcDevUSBCfgCallerIdATCmd

The modem AT command required to initiate caller id logging
by the modem.

OctetString

.1.3.6.1.4.1.244.1.1.4.5.2.1.29

slcDevUSBCfgHostList

When slcDevUSBCfgModemState is set to dialinHostList, the
name of the Host List used for Dial-in.

OctetString

.1.3.6.1.4.1.244.1.1.4.5.2.1.30

slcDevUSBCfgCBCPClientType

When slcDevUSBCfgModemState is set to cbcpClient, the
preferred type of dialback number to use for CBCP negotiation.

Enumeration

Enumerated Values:

1	adminDefined
2	userDefined

.1.3.6.1.4.1.244.1.1.4.5.2.1.31

slcDevUSBCfgCBCPServerAllowNoCallback

If enabled and slcDevUSBCfgModemState is set to cbcpServer,
the SLC will allow the PPP peer to select the No Callback
option during CBCP negotiation.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.5.2.1.32

slcDevUSBCfgTelnetState

If enabled, Telnet connections to the USB modem are allowed.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.5.2.1.33

slcDevUSBCfgTelnetPort

TCP Port number for Telnet connections directly to the
USB modem.

Integer32

Constraints:
range: 1025-65535

.1.3.6.1.4.1.244.1.1.4.5.2.1.34

slcDevUSBCfgTelnetAuth

If enabled, the user is required to authenticate to access
the USB modem with Telnet.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.5.2.1.35

slcDevUSBCfgSSHState

If enabled, SSH connections to the USB modem are allowed.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.5.2.1.36

slcDevUSBCfgSSHPort

TCP Port number for SSH connections directly to the USB modem.

Integer32

Constraints:
range: 1025-65535

.1.3.6.1.4.1.244.1.1.4.5.2.1.37

slcDevUSBCfgSSHAuth

If enabled, the user is required to authenticate to access
the USB modem with SSH.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.5.2.1.38

slcDevUSBCfgTCPState

If enabled, TCP connections to the USB modem are allowed.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.5.2.1.39

slcDevUSBCfgTCPPort

TCP Port number for TCP connections directly to the USB modem.

Integer32

Constraints:
range: 1025-65535

.1.3.6.1.4.1.244.1.1.4.5.2.1.40

slcDevUSBCfgTCPAuth

If enabled, the user is required to authenticate to access
the USB modem with TCP.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.5.2.1.41

slcDevUSBCfgGSMPIN

The PIN associated with the GSM/GPRS modem.

OctetString

.1.3.6.1.4.1.244.1.1.4.5.2.1.42

slcDevUSBCfgGSMPPPCompression

If enabled, PPP compression is enabled GSM/GPRS modem
connections.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.5.2.1.43

slcDevUSBCfgGSMAutoAcquireDNS

If enabled, DNS servers will be acquired vi GSM/GPRS modem
PPP connections.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.5.2.1.44

slcDevUSBCfgGSMDialoutMode

The mode to be used for GSM/GPRS modems configured for
dialout.

Enumeration

Enumerated Values:

1	gprs
2	gsm

.1.3.6.1.4.1.244.1.1.4.5.2.1.45

slcDevUSBCfgGSMContextID

The Context Id string used for GSM/GPRS modems configured
for GPRS dialout mode.

OctetString

.1.3.6.1.4.1.244.1.1.4.5.2.1.46

slcDevUSBCfgGSMBearerService

The Bearer Service Type string used for GSM/GPRS modems
configured for GSM dialin/dialout mode.

OctetString

.1.3.6.1.4.1.244.1.1.4.5.2.1.47

slcDevUSBCfgCHAPAuthLocalUsers

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.5.2.1.48

slcDevUSBCfgUseSites

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.5.2.1.49

slcDevUSBCfgDialbackRetries

When slcDevUSBCfgModemState is set to dialback or cbcpServer,
specifies the number of times the SLC will retry the dial-out
portion of the dialing sequence if the first attempt to
dial-out fails.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.5.2.1.50

slcDevUSBCfgDialtoneCheck

The time (in minutes) between checks for a modem dialtone.
A value of 0 indicates that dialtone checks are disabled.

minutesInteger32

Constraints:
range: 0-600

.1.3.6.1.4.1.244.1.1.4.5.2.1.51

slcDevUSBCfgGroup

The group or groups that may access the USB port.

OctetString

.1.3.6.1.4.1.244.1.1.4.5.2.1.52

slcDevRPMCfgTable

table

.1.3.6.1.4.1.244.1.1.4.7.1 · 1 row entry · 28 columns

Open in standard view

Table of RPM configuration entries.

slcDevRPMCfgEntry entry .1.3.6.1.4.1.244.1.1.4.7.1.1

An entry containing all configuration settings for an RPM,
as well as some top level status information for the RPM.

Indexes

slcDevRPMId

Column Syntax OID

slcDevRPMId

The unique identifier for an RPM device.

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.244.1.1.4.7.1.1.1

slcDevRPMName

The name of the RPM.

OctetString

Constraints:
range: 1-20

.1.3.6.1.4.1.244.1.1.4.7.1.1.2

slcDevRPMVendorModel

The manufacture and model of the RPM.

OctetString

.1.3.6.1.4.1.244.1.1.4.7.1.1.3

slcDevRPMManagedVia

The method of control for managing the RPM.

Enumeration

Enumerated Values:

1	serial
2	network
3	snmp
4	usb

.1.3.6.1.4.1.244.1.1.4.7.1.1.4

slcDevRPMIPAddress

For SNMP and network managed RPMs, the IP Address of the RPM.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.244.1.1.4.7.1.1.5

slcDevRPMPort

For network managed RPMs, the TCP port to use to connect to
the RPM. For USB managed RPMs, the USB port the device is
connected to (0 indicates a port on the front of the SLC).
For serially managed RPMs, the RJ45 de…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.7.1.1.6

slcDevRPMDriverOpts

Any driver options that are configured for the RPM. This
option is mostly used for the USB vendor and product id.

OctetString

.1.3.6.1.4.1.244.1.1.4.7.1.1.7

slcDevRPMStatus

The current status for the RPM; for example, 'OL' to
indicate 'Online' for a UPS. This object may be blank if
the device does not report a status, or if the device is
not in an error state.

OctetString

.1.3.6.1.4.1.244.1.1.4.7.1.1.8

slcDevRPMFirmwareVersion

The current firmware version of the RPM. This object may be
blank if the device does not report its firmware version.

OctetString

.1.3.6.1.4.1.244.1.1.4.7.1.1.9

slcDevRPMSerialNumber

The serial number of the RPM. This object may be blank if
the device does not report its serial number.

OctetString

.1.3.6.1.4.1.244.1.1.4.7.1.1.10

slcDevRPMMACAddress

The hardware address of the ethernet port of the RPM.
This object may be blank if the device does not report
its MAC address.

OctetString

.1.3.6.1.4.1.244.1.1.4.7.1.1.11

slcDevRPMNumOutlets

The number of power outlets that the RPM has.

Integer32

Constraints:
range: 0-120

.1.3.6.1.4.1.244.1.1.4.7.1.1.12

slcDevRPMOutletsOn

The number of RPM outlets that are currently turned on.
A negative value indicates that the RPM does not report
how many outlets are turned on.

Integer32

Constraints:
range: -1-120

.1.3.6.1.4.1.244.1.1.4.7.1.1.13

slcDevRPMSNMPReadComm

For SNMP managed RPMs, the SNMP read (get) community.

OctetString

Constraints:
range: 1-20

.1.3.6.1.4.1.244.1.1.4.7.1.1.14

slcDevRPMAdminLogin

For serial or network managed RPMs, the administrator login.

OctetString

Constraints:
range: 1-20

.1.3.6.1.4.1.244.1.1.4.7.1.1.15

slcDevRPMLogStatus

Indicates how frequently the status for the RPM is logged.
A value of 0 indicates that logging is disabled.

minutesInteger32

Constraints:
range: 0-60

.1.3.6.1.4.1.244.1.1.4.7.1.1.16

slcDevRPMCriticalSNMPTraps

If enabled, indicates that the slcEventRPMAction trap will
be sent for critical events for the RPM.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.7.1.1.17

slcDevRPMCriticalEmails

An email address to send emails to for critical events for
the RPM.

OctetString

.1.3.6.1.4.1.244.1.1.4.7.1.1.18

slcDevRPMProvidesSLCPower

If enabled, indicates that the RPM provides power to the SLC.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.7.1.1.19

slcDevRPMOnLowBattery

Indicates the action taken when a UPS is on battery and
reaches a 'low battery' state. Applies to UPS devices only.

Enumeration

Enumerated Values:

1	shutdownThisUPS
2	shutdownAllUPS
3	allowBatteryToFail
4	shutdownSLCUPS

.1.3.6.1.4.1.244.1.1.4.7.1.1.20

slcDevRPMShutdownOrder

If a UPS reaches a 'low battery' state and its
slcDevRPMOnLowBattery setting is shutdownAllUPS, this
indicates the order in which this RPM will be shutdown as
all UPSes are shutdown. All UPSes with a shutdown order of …

Integer32

Constraints:
range: 0-50

.1.3.6.1.4.1.244.1.1.4.7.1.1.21

slcDevRPMLoad

The current load of the RPM expressed as a percentage.
The value is in tenths of a percent. A negative value
indicates that the RPM does not report load values.

tenths of a percentInteger32

Constraints:
range: -1-1000

.1.3.6.1.4.1.244.1.1.4.7.1.1.22

slcDevRPMLoadOverThreshold

The load when the RPM switches to an overload condition,
expressed as a percentage. The value is in tenths of a
percent. A negative value indicates that the RPM does not
report over load threshold values.

tenths of a percentInteger32

Constraints:
range: -1-1000

.1.3.6.1.4.1.244.1.1.4.7.1.1.23

slcDevRPMBatteryCharge

The current battery charge for the the RPM, expressed as
a percentage. The value is in tenths of a percent. A
negative value indicates that the RPM does not report
battery charge values.

tenths of a percentInteger32

Constraints:
range: -1-1000

.1.3.6.1.4.1.244.1.1.4.7.1.1.24

slcDevRPMBatteryRuntime

The number of seconds in the RPM remaining battery life.
A value of 0 indicates that the RPM does not report battery
runtime values.

hundredths of secondsSNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.244.1.1.4.7.1.1.25

slcDevRPMBeeperStatus

If enabled, indicates that the RPM beeper is enabled.
A value of 0 indicates that the RPM does not report beeper
status.

EnabledState

Textual Convention: EnabledState Enumeration

Type Values:

1	disabled
2	enabled

.1.3.6.1.4.1.244.1.1.4.7.1.1.26

slcDevRPMTemperature

The internal temperature of the RPM, given in Celsius.
A value of less than or equal to zero indicates that the
RPM does not report temperature values.

CelsiusSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.7.1.1.27

slcDevRPMUptime

The number of seconds the RPM has been up. A value of 0
indicates that the RPM does not report uptime values.

hundredths of secondsSNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.244.1.1.4.7.1.1.28

slcDevRPMStatusTable

table

.1.3.6.1.4.1.244.1.1.4.7.2 · 1 row entry · 6 columns

Open in standard view

Table of RPM status entries.

slcDevRPMStatusEntry entry .1.3.6.1.4.1.244.1.1.4.7.2.1

An entry containing status information for an RPM. The SLC
supports up to two towers or units per RPM.

Indexes

slcDevRPMId RPMTowerIndex

Column	Syntax	OID
slcDevRPMCurrent The total current level, in tenths of Amps, for all outlets, on a given RPM tower or unit. If the value is negative, the RPM does not report current for the tower or unit.	tenths of AmpsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.244.1.1.4.7.2.1.1`
slcDevRPMInputVoltage The input voltage, in tenths of Volts, on a given RPM tower or unit. If the value is negative, the RPM does not report input voltage for the tower or unit.	tenths of VoltsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.244.1.1.4.7.2.1.2`
slcDevRPMApparentPower The apparent power, in tenths of Volt-Amps, on a given RPM tower or unit. If the value is negative, the RPM does not report apparent power for the tower or unit.	tenths of Volt-AmpsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.244.1.1.4.7.2.1.3`
slcDevRPMNominalApparentPower The nominal apparent power, in tenths of Volt-Amps, on a given RPM tower or unit. If the value is negative, the RPM does not report nominal apparent power for the tower or unit.	tenths of Volt-AmpsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.244.1.1.4.7.2.1.4`
slcDevRPMRealPower The real power, in tenths of Watts, on a given RPM tower or unit. If the value is negative, the RPM does not report real power for the tower or unit.	tenths of WattsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.244.1.1.4.7.2.1.5`
slcDevRPMNominalRealPower The nominal real power, in tenths of Watts, on a given RPM tower or unit. If the value is negative, the RPM does not report nominal real power for the tower or unit.	tenths of WattsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.244.1.1.4.7.2.1.6`

slcDevRPMOutletTable

table

.1.3.6.1.4.1.244.1.1.4.7.3 · 1 row entry · 4 columns

Open in standard view

Table of RPM outlet status and control entries.

slcDevRPMOutletEntry entry .1.3.6.1.4.1.244.1.1.4.7.3.1

An entry containing status and control for outlets on an RPM.

Indexes

slcDevRPMId RPMOutletIndex

Column Syntax OID

slcDevRPMOutletName

The current name of the RPM outlet. This will be blank if
the RPM device does not report outlet names.

OctetString

.1.3.6.1.4.1.244.1.1.4.7.3.1.1

slcDevRPMOutletState

The current state of the RPM outlet.

Enumeration

Enumerated Values:

1	unknown
2	off
3	on

.1.3.6.1.4.1.244.1.1.4.7.3.1.2

slcDevRPMOutletCurrent

The current level, in tenths of Amps, for the RPM outlet.
This will be negative if the RPM does not report current
values for the outlet.

tenths of AmpsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.4.7.3.1.3

slcDevRPMOutletAction

Performs an action to change the state of an outlet on an
RPM. A read of this object always returns the value
noAction(1). If the RPM supports individual outlet control,
a command will be sent to the RPM to change t…

Enumerationr/w

Enumerated Values:

1	noAction
2	turnOff
3	turnOn
4	cyclePower

.1.3.6.1.4.1.244.1.1.4.7.3.1.4

slcConnTable

table

.1.3.6.1.4.1.244.1.1.5.2 · 1 row entry · 10 columns

Open in standard view

Table of connection entries.  The number of entries is given 
by the value of slcConnNumber.

slcConnEntry entry .1.3.6.1.4.1.244.1.1.5.2.1

An entry containing a connection.

Indexes

slcConnIndex

Column Syntax OID

slcConnIndex

Reference index for each connection.

Integer32

Constraints:
range: 1-512

.1.3.6.1.4.1.244.1.1.5.2.1.1

slcConnEndPt1

A description of one of the end points of the connection.

OctetString

.1.3.6.1.4.1.244.1.1.5.2.1.2

slcConnEndPt2

A description of one of the end points of the connection.

OctetString

.1.3.6.1.4.1.244.1.1.5.2.1.3

slcConnFlow

The direction that data is flowing in the connection.

Enumeration

Enumerated Values:

1	bidirectional
2	endpt1toendpt2
3	endpt2toendpt1

.1.3.6.1.4.1.244.1.1.5.2.1.4

slcConnUser

The user that initiated the connection.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.244.1.1.5.2.1.5

slcConnDuration

The duration, in seconds, that the connection has existed.

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.5.2.1.6

slcConnDurationStr

The duration, formatted in hours:minutes:seconds, that the
connection has existed.

OctetString

.1.3.6.1.4.1.244.1.1.5.2.1.7

slcConnIdle

The amount of time that the connection has been idle,
in seconds.

secondsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.244.1.1.5.2.1.8

slcConnIdleStr

The amount of time that the connection has been idle,
formatted in hours:minutes:seconds.

OctetString

.1.3.6.1.4.1.244.1.1.5.2.1.9

slcConnSourceIP

For network (Telnet and SSH) connections into the SLC, the
source IP Address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.244.1.1.5.2.1.10