slcDevUSBCfgRestartDelay

LANTRONIX-SLC-MIB · .1.3.6.1.4.1.244.1.1.4.5.2.1.27
MIB view Table view

Object

column seconds SNMPv2-SMIInteger32 
The delay (in seconds) to wait before restarting dial-out or 
dial-on-demand PPP connections.

Context

MIB
LANTRONIX-SLC-MIB
OID
.1.3.6.1.4.1.244.1.1.4.5.2.1.27
Type
column
Access
readonly
Status
current
Units
seconds
Parent
slcDevUSBCfgEntry
Table
slcDevUSBCfgTable
Siblings
51

Syntax

seconds SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
slcDevUSBId
The identifier for a USB Port (1 indicates USB Port U1).
columnInteger32.1.3.6.1.4.1.244.1.1.4.5.2.1.1
slcDevUSBCfgModemState
For modem cards, indicates how the modem will be used.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.5.2.1.10
slcDevUSBCfgModemMode
For modem cards, the mode: PPP (for Dial-in and Dial-out) and text (for Dial-in and Dial-back).
columnEnumeration.1.3.6.1.4.1.244.1.1.4.5.2.1.11
slcDevUSBCfgLocalIP
For PPP connections, the local IP Address (all zeros if it should be negotiated).
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.244.1.1.4.5.2.1.12
slcDevUSBCfgRemoteIP
For PPP connections, the remote IP Address (all zeros if it should be negotiated).
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.244.1.1.4.5.2.1.13
slcDevUSBCfgAuth
For PPP connections, the type of authentication to be used.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.5.2.1.14
slcDevUSBCfgCHAPHost
For PPP connections with CHAP authentication, the host (for Unix) or user (for Windows) to use.
columnOctetString.1.3.6.1.4.1.244.1.1.4.5.2.1.15
slcDevUSBCfgDODAuth
For PPP connections that are configured for both Dial-in and Dial-on-Demand, the type of authentication to be used for Dial-on-Demand.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.5.2.1.16
slcDevUSBCfgDODCHAPHost
For PPP connections that are configured for both Dial-in and Dial-on-Demand, with CHAP authentication for Dial-on-Demand, the host (for Unix) or user (for Windows) to use.
columnOctetString.1.3.6.1.4.1.244.1.1.4.5.2.1.17
slcDevUSBCfgInitScript
The initialization script for a modem.
columnOctetString.1.3.6.1.4.1.244.1.1.4.5.2.1.18
slcDevUSBCfgTimeout
The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
columnminutes Integer32.1.3.6.1.4.1.244.1.1.4.5.2.1.19
slcDevUSBCfgCardType
The type of USB device in the port.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.5.2.1.2
slcDevUSBCfgDialoutNum
The phone number to use for dial-out connections.
columnOctetString.1.3.6.1.4.1.244.1.1.4.5.2.1.20
slcDevUSBCfgDialoutLogin
The login to use for dial-out connections.
columnOctetString.1.3.6.1.4.1.244.1.1.4.5.2.1.21
slcDevUSBCfgDialbackMode
For dial-back connections, defines the phone number to call: a number associated with the authenticated user, or a fixed number associated with the Device Port.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.5.2.1.22
slcDevUSBCfgDialbackNum
The phone number to use for dial-back connections.
columnOctetString.1.3.6.1.4.1.244.1.1.4.5.2.1.23
slcDevUSBCfgDialbackDelay
When slcDevUSBCfgModemState is set to dialback or cbcpServer, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.244.1.1.4.5.2.1.24
slcDevUSBCfgNATState
If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.5.2.1.25
slcDevUSBCfgIdleTimeout
The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP conne…
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.244.1.1.4.5.2.1.26
slcDevUSBCfgCallerIdLogging
If enabled, caller id logging is enabled for a modem dial-in connection.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.5.2.1.28
slcDevUSBCfgCallerIdATCmd
The modem AT command required to initiate caller id logging by the modem.
columnOctetString.1.3.6.1.4.1.244.1.1.4.5.2.1.29
slcDevUSBCfgCardId
The identifying string of the device in the port.
columnOctetString.1.3.6.1.4.1.244.1.1.4.5.2.1.3
slcDevUSBCfgHostList
When slcDevUSBCfgModemState is set to dialinHostList, the name of the Host List used for Dial-in.
columnOctetString.1.3.6.1.4.1.244.1.1.4.5.2.1.30
slcDevUSBCfgCBCPClientType
When slcDevUSBCfgModemState is set to cbcpClient, the preferred type of dialback number to use for CBCP negotiation.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.5.2.1.31
slcDevUSBCfgCBCPServerAllowNoCallback
If enabled and slcDevUSBCfgModemState is set to cbcpServer, the SLC will allow the PPP peer to select the No Callback option during CBCP negotiation.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.5.2.1.32
slcDevUSBCfgTelnetState
If enabled, Telnet connections to the USB modem are allowed.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.5.2.1.33
slcDevUSBCfgTelnetPort
TCP Port number for Telnet connections directly to the USB modem.
columnInteger32.1.3.6.1.4.1.244.1.1.4.5.2.1.34
slcDevUSBCfgTelnetAuth
If enabled, the user is required to authenticate to access the USB modem with Telnet.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.5.2.1.35
slcDevUSBCfgSSHState
If enabled, SSH connections to the USB modem are allowed.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.5.2.1.36
slcDevUSBCfgSSHPort
TCP Port number for SSH connections directly to the USB modem.
columnInteger32.1.3.6.1.4.1.244.1.1.4.5.2.1.37
slcDevUSBCfgSSHAuth
If enabled, the user is required to authenticate to access the USB modem with SSH.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.5.2.1.38
slcDevUSBCfgTCPState
If enabled, TCP connections to the USB modem are allowed.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.5.2.1.39
slcDevUSBCfgStorageFS
For thumb drives, the type of filesystem on the card.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.5.2.1.4
slcDevUSBCfgTCPPort
TCP Port number for TCP connections directly to the USB modem.
columnInteger32.1.3.6.1.4.1.244.1.1.4.5.2.1.40
slcDevUSBCfgTCPAuth
If enabled, the user is required to authenticate to access the USB modem with TCP.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.5.2.1.41
slcDevUSBCfgGSMPIN
The PIN associated with the GSM/GPRS modem.
columnOctetString.1.3.6.1.4.1.244.1.1.4.5.2.1.42
slcDevUSBCfgGSMPPPCompression
If enabled, PPP compression is enabled GSM/GPRS modem connections.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.5.2.1.43
slcDevUSBCfgGSMAutoAcquireDNS
If enabled, DNS servers will be acquired vi GSM/GPRS modem PPP connections.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.5.2.1.44
slcDevUSBCfgGSMDialoutMode
The mode to be used for GSM/GPRS modems configured for dialout.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.5.2.1.45
slcDevUSBCfgGSMContextID
The Context Id string used for GSM/GPRS modems configured for GPRS dialout mode.
columnOctetString.1.3.6.1.4.1.244.1.1.4.5.2.1.46
slcDevUSBCfgGSMBearerService
The Bearer Service Type string used for GSM/GPRS modems configured for GSM dialin/dialout mode.
columnOctetString.1.3.6.1.4.1.244.1.1.4.5.2.1.47
slcDevUSBCfgCHAPAuthLocalUsers
If enabled, the local user list (login and password) is used to validate the CHAP host and secret sent by a remote PPP peer for CHAP authentication, instead of using the CHAP ho…
columnEnabledState.1.3.6.1.4.1.244.1.1.4.5.2.1.48
slcDevUSBCfgUseSites
If enabled, sites (a set of site-oriented modem parameters that can be activated by various modem-related events such as authentication, outbound traffic for Dial-on-demand con…
columnEnabledState.1.3.6.1.4.1.244.1.1.4.5.2.1.49
slcDevUSBCfgBaud
For modem cards, the baud rate.
columnInteger32.1.3.6.1.4.1.244.1.1.4.5.2.1.5
slcDevUSBCfgDialbackRetries
When slcDevUSBCfgModemState is set to dialback or cbcpServer, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.244.1.1.4.5.2.1.50
slcDevUSBCfgDialtoneCheck
The time (in minutes) between checks for a modem dialtone. A value of 0 indicates that dialtone checks are disabled.
columnminutes Integer32.1.3.6.1.4.1.244.1.1.4.5.2.1.51
slcDevUSBCfgGroup
The group or groups that may access the USB port.
columnOctetString.1.3.6.1.4.1.244.1.1.4.5.2.1.52
slcDevUSBCfgDataBits
For modem cards, the data bits.
columnInteger32.1.3.6.1.4.1.244.1.1.4.5.2.1.6
slcDevUSBCfgStopBits
For modem cards, the stop bits.
columnInteger32.1.3.6.1.4.1.244.1.1.4.5.2.1.7
slcDevUSBCfgParity
For modem cards, the parity.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.5.2.1.8
slcDevUSBCfgFlowControl
For modem cards, the flow control.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.5.2.1.9