slcDevRPMLoadOverThreshold
LANTRONIX-SLC-MIB ·
.1.3.6.1.4.1.244.1.1.4.7.1.1.23
Object
column
tenths of a percent Integer32
The load when the RPM switches to an overload condition, expressed as a percentage. The value is in tenths of a percent. A negative value indicates that the RPM does not report over load threshold values.
Context
- MIB
- LANTRONIX-SLC-MIB
- OID
.1.3.6.1.4.1.244.1.1.4.7.1.1.23- Type
- column
- Access
- readonly
- Status
- current
- Units
- tenths of a percent
- Parent
- slcDevRPMCfgEntry
- Table
- slcDevRPMCfgTable
- Siblings
- 27
Syntax
tenths of a percent Integer32
Values & Constraints
Object Constraints
range: -1-1000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| slcDevRPMId The unique identifier for an RPM device. | column | Integer32 | .1.3.6.1.4.1.244.1.1.4.7.1.1.1 |
| slcDevRPMSerialNumber The serial number of the RPM. This object may be blank if
the device does not report its serial number. | column | OctetString | .1.3.6.1.4.1.244.1.1.4.7.1.1.10 |
| slcDevRPMMACAddress The hardware address of the ethernet port of the RPM.
This object may be blank if the device does not report
its MAC address. | column | OctetString | .1.3.6.1.4.1.244.1.1.4.7.1.1.11 |
| slcDevRPMNumOutlets The number of power outlets that the RPM has. | column | Integer32 | .1.3.6.1.4.1.244.1.1.4.7.1.1.12 |
| slcDevRPMOutletsOn The number of RPM outlets that are currently turned on.
A negative value indicates that the RPM does not report
how many outlets are turned on. | column | Integer32 | .1.3.6.1.4.1.244.1.1.4.7.1.1.13 |
| slcDevRPMSNMPReadComm For SNMP managed RPMs, the SNMP read (get) community. | column | OctetString | .1.3.6.1.4.1.244.1.1.4.7.1.1.14 |
| slcDevRPMAdminLogin For serial or network managed RPMs, the administrator login. | column | OctetString | .1.3.6.1.4.1.244.1.1.4.7.1.1.15 |
| slcDevRPMLogStatus Indicates how frequently the status for the RPM is logged.
A value of 0 indicates that logging is disabled. | column | minutes Integer32 | .1.3.6.1.4.1.244.1.1.4.7.1.1.16 |
| slcDevRPMCriticalSNMPTraps If enabled, indicates that the slcEventRPMAction trap will
be sent for critical events for the RPM. | column | EnabledState | .1.3.6.1.4.1.244.1.1.4.7.1.1.17 |
| slcDevRPMCriticalEmails An email address to send emails to for critical events for
the RPM. | column | OctetString | .1.3.6.1.4.1.244.1.1.4.7.1.1.18 |
| slcDevRPMProvidesSLCPower If enabled, indicates that the RPM provides power to the SLC. | column | EnabledState | .1.3.6.1.4.1.244.1.1.4.7.1.1.19 |
| slcDevRPMName The name of the RPM. | column | OctetString | .1.3.6.1.4.1.244.1.1.4.7.1.1.2 |
| slcDevRPMOnLowBattery Indicates the action taken when a UPS is on battery and
reaches a 'low battery' state. Applies to UPS devices only. | column | Enumeration | .1.3.6.1.4.1.244.1.1.4.7.1.1.20 |
| slcDevRPMShutdownOrder If a UPS reaches a 'low battery' state and its
slcDevRPMOnLowBattery setting is shutdownAllUPS, this
indicates the order in which this RPM will be shutdown as
all UPSes are shutdo… | column | Integer32 | .1.3.6.1.4.1.244.1.1.4.7.1.1.21 |
| slcDevRPMLoad The current load of the RPM expressed as a percentage.
The value is in tenths of a percent. A negative value
indicates that the RPM does not report load values. | column | tenths of a percent Integer32 | .1.3.6.1.4.1.244.1.1.4.7.1.1.22 |
| slcDevRPMBatteryCharge The current battery charge for the the RPM, expressed as
a percentage. The value is in tenths of a percent. A
negative value indicates that the RPM does not report
battery ch… | column | tenths of a percent Integer32 | .1.3.6.1.4.1.244.1.1.4.7.1.1.24 |
| slcDevRPMBatteryRuntime The number of seconds in the RPM remaining battery life.
A value of 0 indicates that the RPM does not report battery
runtime values. | column | hundredths of seconds SNMPv2-SMITimeTicks | .1.3.6.1.4.1.244.1.1.4.7.1.1.25 |
| slcDevRPMBeeperStatus If enabled, indicates that the RPM beeper is enabled.
A value of 0 indicates that the RPM does not report beeper
status. | column | EnabledState | .1.3.6.1.4.1.244.1.1.4.7.1.1.26 |
| slcDevRPMTemperature The internal temperature of the RPM, given in Celsius.
A value of less than or equal to zero indicates that the
RPM does not report temperature values. | column | Celsius SNMPv2-SMIInteger32 | .1.3.6.1.4.1.244.1.1.4.7.1.1.27 |
| slcDevRPMUptime The number of seconds the RPM has been up. A value of 0
indicates that the RPM does not report uptime values. | column | hundredths of seconds SNMPv2-SMITimeTicks | .1.3.6.1.4.1.244.1.1.4.7.1.1.28 |
| slcDevRPMVendorModel The manufacture and model of the RPM. | column | OctetString | .1.3.6.1.4.1.244.1.1.4.7.1.1.3 |
| slcDevRPMManagedVia The method of control for managing the RPM. | column | Enumeration | .1.3.6.1.4.1.244.1.1.4.7.1.1.4 |
| slcDevRPMIPAddress For SNMP and network managed RPMs, the IP Address of the RPM. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.244.1.1.4.7.1.1.5 |
| slcDevRPMPort For network managed RPMs, the TCP port to use to connect to
the RPM. For USB managed RPMs, the USB port the device is
connected to (0 indicates a port on the front of the SLC).… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.244.1.1.4.7.1.1.6 |
| slcDevRPMDriverOpts Any driver options that are configured for the RPM. This
option is mostly used for the USB vendor and product id. | column | OctetString | .1.3.6.1.4.1.244.1.1.4.7.1.1.7 |
| slcDevRPMStatus The current status for the RPM; for example, 'OL' to
indicate 'Online' for a UPS. This object may be blank if
the device does not report a status, or if the device is
not in a… | column | OctetString | .1.3.6.1.4.1.244.1.1.4.7.1.1.8 |
| slcDevRPMFirmwareVersion The current firmware version of the RPM. This object may be
blank if the device does not report its firmware version. | column | OctetString | .1.3.6.1.4.1.244.1.1.4.7.1.1.9 |