slcPCCardCfgGSMContextID

LANTRONIX-SLC-MIB · .1.3.6.1.4.1.244.1.1.4.3.1.1.39
MIB view Table view

Object

column OctetString 
The Context Id string used for GSM/GPRS PC Card modems 
configured for GPRS dialout mode.

Context

MIB
LANTRONIX-SLC-MIB
OID
.1.3.6.1.4.1.244.1.1.4.3.1.1.39
Type
column
Access
readonly
Status
current
Parent
slcPCCardCfgEntry
Table
slcPCCardCfgTable
Siblings
53

Syntax

OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
slcPCCardCfgIndex
Reference index for each PC Card Configuration entry.
columnInteger32.1.3.6.1.4.1.244.1.1.4.3.1.1.1
slcPCCardCfgModemMode
For ISDN and modem cards, the mode: PPP (for Dial-in and Dial-out) and text (for Dial-in and Dial-back).
columnEnumeration.1.3.6.1.4.1.244.1.1.4.3.1.1.10
slcPCCardCfgLocalIP
For PPP connections, the local IP Address (all zeros if it should be negotiated).
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.244.1.1.4.3.1.1.11
slcPCCardCfgRemoteIP
For PPP connections, the remote IP Address (all zeros if it should be negotiated).
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.244.1.1.4.3.1.1.12
slcPCCardCfgAuth
For PPP connections, the type of authentication to be used.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.3.1.1.13
slcPCCardCfgCHAPHost
For PPP connections with CHAP authentication, the host (for Unix) or user (for Windows) to use.
columnOctetString.1.3.6.1.4.1.244.1.1.4.3.1.1.14
slcPCCardCfgInitScript
The initialization script for an external modem.
columnOctetString.1.3.6.1.4.1.244.1.1.4.3.1.1.15
slcPCCardCfgTimeout
The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
columnminutes Integer32.1.3.6.1.4.1.244.1.1.4.3.1.1.16
slcPCCardCfgDialoutNum
The phone number to use for dial-out connections.
columnOctetString.1.3.6.1.4.1.244.1.1.4.3.1.1.17
slcPCCardCfgDialoutLogin
The login to use for dial-out connections.
columnOctetString.1.3.6.1.4.1.244.1.1.4.3.1.1.18
slcPCCardCfgDialbackMode
For dial-back connections, defines the phone number to call: a number associated with the authenticated user, or a fixed number associated with the Device Port.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.3.1.1.19
slcPCCardCfgCardType
The type of PC Card in the slot.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.3.1.1.2
slcPCCardCfgDialbackNum
The phone number to use for dial-back connections.
columnOctetString.1.3.6.1.4.1.244.1.1.4.3.1.1.20
slcPCCardCfgNATState
If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.3.1.1.21
slcPCCardCfgStorageFS
For storage cards, the type of filesystem on the card.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.3.1.1.22
slcPCCardCfgISDNChannel
The channel on the ISDN card to use, either 1 or 2.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.244.1.1.4.3.1.1.23
slcPCCardCfgISDNChannelNum
The phone number associated with the selected ISDN channel.
columnOctetString.1.3.6.1.4.1.244.1.1.4.3.1.1.24
slcPCCardCfgTelnetState
If enabled, Telnet connections to the modem/ISDN PC Card are allowed.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.3.1.1.25
slcPCCardCfgTelnetPort
TCP Port number for Telnet connections directly to the modem/ISDN PC Card.
columnInteger32.1.3.6.1.4.1.244.1.1.4.3.1.1.26
slcPCCardCfgTelnetAuth
If enabled, the user is required to authenticate to access the modem/ISDN PC Card with Telnet.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.3.1.1.27
slcPCCardCfgSSHState
If enabled, SSH connections to the modem/ISDN PC Card are allowed.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.3.1.1.28
slcPCCardCfgSSHPort
TCP Port number for SSH connections directly to the modem/ISDN PC Card.
columnInteger32.1.3.6.1.4.1.244.1.1.4.3.1.1.29
slcPCCardCfgCardId
The identifying string of the card in the slot.
columnOctetString.1.3.6.1.4.1.244.1.1.4.3.1.1.3
slcPCCardCfgSSHAuth
If enabled, the user is required to authenticate to access the modem/ISDN PC Card with SSH.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.3.1.1.30
slcPCCardCfgTCPState
If enabled, TCP connections to the modem/ISDN PC Card are allowed.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.3.1.1.31
slcPCCardCfgTCPPort
TCP Port number for TCP connections directly to the modem/ISDN PC Card.
columnInteger32.1.3.6.1.4.1.244.1.1.4.3.1.1.32
slcPCCardCfgTCPAuth
If enabled, the user is required to authenticate to access the modem/ISDN PC Card with TCP.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.3.1.1.33
slcPCCardCfgGSMPIN
The PIN associated with the GSM/GPRS PC Card modem.
columnOctetString.1.3.6.1.4.1.244.1.1.4.3.1.1.34
slcPCCardCfgGSMNetworkName obsolete
The Network Name associated with the GSM/GPRS PC Card modem.
columnOctetString.1.3.6.1.4.1.244.1.1.4.3.1.1.35
slcPCCardCfgGSMPPPCompression
If enabled, PPP compression is enabled for GSM/GPRS PC Card modem connections.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.3.1.1.36
slcPCCardCfgGSMAutoAcquireDNS
If enabled, DNS servers will be acquired vi GSM/GPRS PC Card modem PPP connections.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.3.1.1.37
slcPCCardCfgGSMDialoutMode
The mode to be used for GSM/GPRS PC Card modems configured for dialout.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.3.1.1.38
slcPCCardCfgBaud
For ISDN and modem cards, the baud rate.
columnInteger32.1.3.6.1.4.1.244.1.1.4.3.1.1.4
slcPCCardCfgGSMBearerService
The Bearer Service Type string used for GSM/GPRS PC Card modems configured for GSM dialin/dialout mode.
columnOctetString.1.3.6.1.4.1.244.1.1.4.3.1.1.40
slcPCCardCfgIdleTimeout
The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP conne…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.244.1.1.4.3.1.1.41
slcPCCardCfgRestartDelay
The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.244.1.1.4.3.1.1.42
slcPCCardCfgCallerIdLogging
If enabled, caller id logging is enabled for a modem dial-in connection.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.3.1.1.43
slcPCCardCfgCallerIdATCmd
The modem AT command required to initiate caller id logging by the modem.
columnOctetString.1.3.6.1.4.1.244.1.1.4.3.1.1.44
slcPCCardCfgDODAuth
For PPP connections that are configured for both Dial-in and Dial-on-Demand, the type of authentication to be used for Dial-on-Demand.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.3.1.1.45
slcPCCardCfgDODCHAPHost
For PPP connections that are configured for both Dial-in and Dial-on-Demand, with CHAP authentication for Dial-on-Demand, the host (for Unix) or user (for Windows) to use.
columnOctetString.1.3.6.1.4.1.244.1.1.4.3.1.1.46
slcPCCardCfgHostList
When slcPCCardCfgModemState is set to dialinHostList, the name of the Host List used for Dial-in.
columnOctetString.1.3.6.1.4.1.244.1.1.4.3.1.1.47
slcPCCardCfgCBCPClientType
When slcPCCardCfgModemState is set to cbcpClient, the preferred type of dialback number to use for CBCP negotiation.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.3.1.1.48
slcPCCardCfgCBCPServerAllowNoCallback
If enabled and slcPCCardCfgModemState is set to cbcpServer, the SLC will allow the PPP peer to select the No Callback option during CBCP negotiation.
columnEnabledState.1.3.6.1.4.1.244.1.1.4.3.1.1.49
slcPCCardCfgDataBits
For ISDN and modem cards, the data bits.
columnInteger32.1.3.6.1.4.1.244.1.1.4.3.1.1.5
slcPCCardCfgDialbackDelay
When slcPCCardCfgModemState is set to dialback or cbcpServer, specifies the delay between the dial-in and dial-out portion of the dialing sequence.
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.244.1.1.4.3.1.1.50
slcPCCardCfgCHAPAuthLocalUsers
If enabled, the local user list (login and password) is used to validate the CHAP host and secret sent by a remote PPP peer for CHAP authentication, instead of using the CHAP ho…
columnEnabledState.1.3.6.1.4.1.244.1.1.4.3.1.1.51
slcPCCardCfgUseSites
If enabled, sites (a set of site-oriented modem parameters that can be activated by various modem-related events such as authentication, outbound traffic for Dial-on-demand con…
columnEnabledState.1.3.6.1.4.1.244.1.1.4.3.1.1.52
slcPCCardCfgDialbackRetries
When slcPCCardCfgModemState is set to dialback or cbcpServer, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.244.1.1.4.3.1.1.53
slcPCCardCfgGroup
The group or groups that may access the PC Card slot.
columnOctetString.1.3.6.1.4.1.244.1.1.4.3.1.1.54
slcPCCardCfgStopBits
For ISDN and modem cards, the stop bits.
columnInteger32.1.3.6.1.4.1.244.1.1.4.3.1.1.6
slcPCCardCfgParity
For ISDN and modem cards, the parity.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.3.1.1.7
slcPCCardCfgFlowControl
For ISDN and modem cards, the flow control.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.3.1.1.8
slcPCCardCfgModemState
For ISDN and modem cards, indicates how the modem will be used.
columnEnumeration.1.3.6.1.4.1.244.1.1.4.3.1.1.9