HUAWEI-ETHERLIKE-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

933

hwEthernetTable

table

.1.3.6.1.4.1.2011.5.14.1.4 · 1 row entry · 46 columns

Open in standard view

Indicates the line parameter configuration table of an ETH port. 
It is used for setting the rate, duplex, auto-negotiation, MDI, 
traffic control, Combo mode of an Ethernet port.
The index of this table is ifIndex.

hwEthernetEntry entry .1.3.6.1.4.1.2011.5.14.1.4.1

Indicates the line parameter configuration table of an ETH port.
It is used for setting the rate, duplex, auto-negotiation, MDI,
traffic control, Combo mode of an Ethernet port.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column Syntax OID

hwifEthernetDuplex

Ethernet port duplex mode.
Options:
1. full(1) -indicates that at one moment, the port can be sending packets and receiving packets
2. half(2) -indicates that at one moment, the port can be sending packets or re…

Enumerationr/w

Enumerated Values:

-1	invalid
1	full
2	half
3	auto
4	autoFull
5	autoHalf

.1.3.6.1.4.1.2011.5.14.1.4.1.1

hwifEthernetMTU

This object is used for setting the MTU of a ETH port
0 indicates to restore the default value.
-1 indicates the value is invalid.
Range: -1-0, 1519-9280

Integer32r/w

Constraints:
range: -1-0
range: 1519-9280

.1.3.6.1.4.1.2011.5.14.1.4.1.2

hwifEthernetSpeed

Ethernet port rate.
Options:
1. auto(0) -Ethernet port rate 0
2. s10M(10) -Ethernet port rate forced 10M
3. s100M(100) -Ethernet port rate forced 100M
4. s1000M(1000) -Ethernet p…

Enumerationr/w

Enumerated Values:

-1	invalid
0	auto
10	s10M
11	autoS10M
100	s100M
101	autoS100M
1000	s1000M
1001	autoS1000M
2500	s2500M
10000	s10000M
10001	autoS10000M
100000	s100000M

.1.3.6.1.4.1.2011.5.14.1.4.1.3

hwifEthernetLoopback

Ethernet port loop back mode.
Options:
1. noloopback(1) -cancel loopback
2. internalloopback(2) -local loopback
3. externalloopback(3) -remote loopback
Ports only on the H801SPUA board support the loopback con…

Enumerationr/w

Enumerated Values:

1	noloopback
2	internalloopback
3	externalloopback

.1.3.6.1.4.1.2011.5.14.1.4.1.4

hwifEthernetMdi

Ethernet port cable type.
Options:
1. mdiII(1) -direct connection cable
2. mdiX(2) -cross-over cable
3. mdiAuto(3) -auto-sensing
4. invalid(-1) -invalid value
After the network cable auto-sensing mode of an Ethe…

Enumerationr/w

Enumerated Values:

-1	invalid
1	mdiII
2	mdiX
3	mdiAuto

.1.3.6.1.4.1.2011.5.14.1.4.1.5

hwMaxMacLearn

The max MAC learned by the Ethernet port.
The invalid value is 65535.

Integer32r/w

Constraints:
range: 0-600
range: 65535-65535

.1.3.6.1.4.1.2011.5.14.1.4.1.6

hwifMacAddressLearn

Status indicates if the interface is allowed to learn MAC address.
Options:
1. enabled(1) -Indicates the interface can learn MAC address.
2. disabled(2) -Indicates the interface can't learn MAC address.
Enable the sel…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.14.1.4.1.7

hwifTag

Ethernet interface tag.
Options:
1. tag(1) -This value is not supported.
2. untag(2) -This value is not supported.
3. multi(3) -This value is not supported.

Enumerationr/w

Enumerated Values:

1	tag
2	untag
3	multi

.1.3.6.1.4.1.2011.5.14.1.4.1.8

hwifEthernetNegotiate

Ethernet port negotiation mode.
Options:
1. true(1) -auto-negotiation mode of an Ethernet port is enabled, Ethernet port automatically
negotiates the port rate and duplex mode with the interconnected Ethe…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.5.14.1.4.1.9

hwifEthernetPeerNegotiate

Ethernet peer port auto-negotiation node (which is needed by MA5100 V2R1 product,
and can be selected by other products of the fixed network depending on the practice.)

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.5.14.1.4.1.10

hwifEthernetPauseFrameTag

Whether the Ethernet port supports Pause frame flow control.
Options:
1. on(1) -support Tx Pause and Rx Pause
2. off(2) -not support
3. rxpause(3) -support Rx Pause not support Tx Pause
4. txpause(4) -support…

Enumerationr/w

Enumerated Values:

1	on
2	off
3	rxpause
4	txpause

.1.3.6.1.4.1.2011.5.14.1.4.1.11

hwifEthernetPauseFrameSending

Ethernet pause frame sending tag (Notes: only for Huawei product of Ma5100)
Whether the network interface is sending Pause frame (which is needed by
MA5100 V2R1 product, and can be selected by other products of the fix…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.5.14.1.4.1.12

hwifEthernetVlanDefault

Describes the native VLAN of an Ethernet port.
When you need to set the packets of the upstream Ethernet
port with the VLAN tag, operate this leaf. After the native
VLAN of the Ethernet port is configured successfull…

Integer32r/w

Constraints:
range: -1--1
range: 1-4093

.1.3.6.1.4.1.2011.5.14.1.4.1.13

hwifEthernetOnlineState

Ethernet port online status (Notes: only for Huawei product of Ma5100).
Whether the network interface is online (which is needed by MA5100 V2R1
product, and can be selected by other products of the fixed network depend…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.5.14.1.4.1.14

hwifEthernetLineSelfAdaptMode

Connecting adaptatively tag,default false.
Options:
1. true(1) -adapting by itself
2. false(2) -adapting by manual

The self-adaptation switch:
In the case of true, the self-adaptation is enabled, and the…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.5.14.1.4.1.15

hwifEthernetTrafficBroadcast

Indicates the broadcast traffic suppression on an Ethernet port.
Range: -1,0-13
13: indicates full-suppression of traffic, and 0 indicates no traffic suppression.
-1: indicates invalid value.
The suppression levels an…

Integer32r/w

Constraints:
range: -1-13

.1.3.6.1.4.1.2011.5.14.1.4.1.16

hwifEthernetTrafficMulticast

Indicates the unknown multicast traffic suppression on an Ethernet port.
Range: -1,0-13 …

Integer32r/w

Constraints:
range: -1-13

.1.3.6.1.4.1.2011.5.14.1.4.1.17

hwifEthernetTrafficUnknowncast

Indicates the unknown unicast traffic suppression on an Ethernet port.
Range: -1,0-13 …

Integer32r/w

Constraints:
range: -1-13

.1.3.6.1.4.1.2011.5.14.1.4.1.18

hwifEthernetJumboEnable

This object is used to enable or disable jumbo frames.
When the carriers' servers need to exchange a large amount of data with their devices,
operate this object to enable jumbo frames.
After the operation is execute…

Enumerationr/w

Enumerated Values:

-1	invalid
1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.14.1.4.1.19

hwifPortDefPriority

Port default 802.1p priority (Notes: Default value is 0.)
------------------------------------------------------------
F/ S/ P Port Priority
------------------------------------------------------------
…

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2011.5.14.1.4.1.20

hwifEthernetComboWorkMode

Work mode information of combo port.
Options:
1. electric(1) -combo port works in electric mode
2. optic(2) -combo port works in optic mode
3. autoFiber(5) -combo port works in auto adapter mode
4. invalid(-1) …

Enumerationr/w

Enumerated Values:

-1	invalid
1	electric
2	optic
5	autoFiber

.1.3.6.1.4.1.2011.5.14.1.4.1.21

hwifEthernetLineTest

It used to test the line status.
Options:
1. test(1) -Test the line operation
2. notSupport(-1) -Indicates the board does not support this operation

Enumerationr/w

Enumerated Values:

-1	notSupport
1	test

.1.3.6.1.4.1.2011.5.14.1.4.1.22

hwifEthernetAutoTxPowerOffSwitch

Indicates the switch of Tx auto power off.
Options:
1. invalid(-1) -invalid value
2. enabled(1) -enable Tx auto poweroff
3. disabled(2) -disable Tx auto poweroff
Default: disable(2).

Enumerationr/w

Enumerated Values:

-1	invalid
1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.14.1.4.1.23

hwifEthernetAutoTxPowerOffDetectTime

Indicates the detecting LOS time of TX auto power off.
Set:
'1-60' means valid value to be set,
Get:
'-1' means invalid value,
Unit: minutes

minutesInteger32r/w

Constraints:
range: -1--1
range: 1-60

.1.3.6.1.4.1.2011.5.14.1.4.1.24

hwifEthernetTxPowerState

Indicates the state of ethernet port Tx.
Options:
1. invalid(-1) -invalid value
2. on(1) -ethernet port Tx is on
3. off(2) -ethernet port Tx is off

Enumeration

Enumerated Values:

-1	invalid
1	on
2	off

.1.3.6.1.4.1.2011.5.14.1.4.1.25

hwEthBind15minAlarmTableIndex

Indicates the 15 minutes alarm profile index for the ethernet port.
Set:
'0' means to unbind 15 minutes alarm profile,
'1-16' means to bind 15 minutes alarm profile to the ethernet port
Get:
'-1' means operation not …

Integer32r/w

Constraints:
range: -1-16

.1.3.6.1.4.1.2011.5.14.1.4.1.26

hwEthBind15minWarningTableIndex

Indicates the 15 minutes warning profile index for the ethernet port.
Set:
'0' means to unbind 15 minutes warning profile,
'1-16' means to bind 15 minutes warning profile to the ethernet port
Get:
'-1' means operatio…

Integer32r/w

Constraints:
range: -1-16

.1.3.6.1.4.1.2011.5.14.1.4.1.27

hwEthBind24hourAlarmTableIndex

Indicates the 24 hours alarm profile index for the ethernet port.
Set:
'0' means to unbind 24 hours alarm profile,
'1-16' means to bind 24 hours alarm profile to the ethernet port
Get:
'-1' means operation not suppor…

Integer32r/w

Constraints:
range: -1-16

.1.3.6.1.4.1.2011.5.14.1.4.1.28

hwEthBind24hourWarningTableIndex

Indicates the 24 hours warning profile index for the ethernet port.
Set:
'0' means to unbind 24 hours warning profile,
'1-16' means to bind 24 hours warning profile to the ethernet port
Get:
'-1' means operation not …

Integer32r/w

Constraints:
range: -1-16

.1.3.6.1.4.1.2011.5.14.1.4.1.29

hwifEthernetPortType

Indicates the ethernet port type.
Options:
1. fe(1) -Ethernet port type FE
2. ge(2) -Ethernet port type GE
3. xge(3) -Ethernet port type 10GE
4. onehundredge(4) -Ethernet port ty…

Enumerationr/w

Enumerated Values:

-1	invalid
1	fe
2	ge
3	xge
4	onehundredge

.1.3.6.1.4.1.2011.5.14.1.4.1.30

hwifEthernetPortTypeAutoSensing

Indicates the switch for the port type auto-sensing.
When the switch is enabled, the port will working on GE or FE mode according to that of link partner.
Options:
1. enable(1) --enable the port type auto-sensing.
2. …

Enumerationr/w

Enumerated Values:

-1	invalid
1	enable
2	disable

.1.3.6.1.4.1.2011.5.14.1.4.1.31

hwifEthernetLoopbackTest

It used to start loopback test.
Options:
1. test(1) -Start loopback test.

Enumerationr/w

Enumerated Values:

test

.1.3.6.1.4.1.2011.5.14.1.4.1.32

hwifEthernetOfflineReason

Indicates the offline reason of ethernet port.
Options:
1. invalid(-1) -invalid value
2. unknown(1) -unknown
3. boardabnormal(2) -board abnormal
4. optic…

Enumeration

Enumerated Values:

-1	invalid
1	unknown
2	boardabnormal
3	opticalmoduleoffline
4	los
5	shutdownbyuser
6	ringdetected
7	ethoamtriggeredlinkdown
8	dyinggasp

.1.3.6.1.4.1.2011.5.14.1.4.1.33

hwifEthernetTxPowerResumeDetect

Indicates the switch of Tx auto power resume detection.
Options:
1. invalid(-1) -invalid value
2. manual(1) -Tx power resume detection manually
3. auto(2) -Tx power resume detection automatically
Default: man…

Enumerationr/w

Enumerated Values:

-1	invalid
1	manual
2	auto

.1.3.6.1.4.1.2011.5.14.1.4.1.34

hwifEthernetTxPowerDetectInterval

Indicates the interval of Tx power pulse.
'100-300' means valid value,
'-1' means invalid value,
Unit: seconds

secondsInteger32r/w

Constraints:
range: -1--1
range: 100-300

.1.3.6.1.4.1.2011.5.14.1.4.1.35

hwifEthernetTxPowerResumeDuration

Indicates the duration of Tx power pulse.
'100-3000' means valid value,
'-1' means invalid value,
Unit: milliseconds

millisecondsInteger32r/w

Constraints:
range: -1--1
range: 100-3000

.1.3.6.1.4.1.2011.5.14.1.4.1.36

hwifEthernetTxPowerManualResume

Indicates the operation of manual resumption.
Options:
1. invalid(-1) -invalid value
2. start(1) -start Tx power resumption

Enumerationr/w

Enumerated Values:

-1	invalid
1	start

.1.3.6.1.4.1.2011.5.14.1.4.1.37

hwifEthernetOpticModuleState

Indicates the state of optical module.
Options:
1. normal(1)
2. absent(2)
3. abnormal(3)
4. mismatch(4)
'2147483647' means invalid value.

Integer32

Constraints:
range: 1-4
range: 2147483647-2147483647

.1.3.6.1.4.1.2011.5.14.1.4.1.38

hwifEthernetLinkflapping

This object is used for setting the link flapping time of a ETH port
0 indicates disable the ETH port link flapping.
10-5000 indicates enable ETH link flapping.
-1: indicates invalid value.
Range: -1 0, 10-5000ms,mu…

millisecondInteger32r/w

Constraints:
range: -1-0
range: 10-5000

.1.3.6.1.4.1.2011.5.14.1.4.1.39

hwifEthernetOfflineTxOffTime

Indicates the the offline time on an Ethernet port.
Range: -1,0-1000
0-1000: indicates the offline time when link down.
0 means the offline time function is off.
-1: indicates invalid value.
Default: 0

millisecondInteger32r/w

Constraints:
range: -1-1000

.1.3.6.1.4.1.2011.5.14.1.4.1.40

hwifEthernetTrafficRateBroadcast

Indicates the broadcast traffic suppression on an Ethernet port.
Range: -1,0-24414
Unit: pps.
24414: indicates full-suppression of traffic, and 0 indicates no traffic suppression.
-1: indicates invalid value.
Default:…

Integer32r/w

Constraints:
range: -1-24414

.1.3.6.1.4.1.2011.5.14.1.4.1.41

hwifEthernetTrafficRateMulticast

Indicates the unknown multicast traffic suppression on an Ethernet port.
Range: -1,0-24414
Unit: pps.
24414: indicates full-suppression of traffic, and 0 indicates no traffic suppr…

Integer32r/w

Constraints:
range: -1-24414

.1.3.6.1.4.1.2011.5.14.1.4.1.42

hwifEthernetTrafficRateUnknowncast

Indicates the unknown unicast traffic suppression on an Ethernet port.
Range: -1,0-24414
Unit: pps.
24414: indicates full-suppression of traffic, and 0 indicates no traffic su…

Integer32r/w

Constraints:
range: -1-24414

.1.3.6.1.4.1.2011.5.14.1.4.1.43

hwEthernetLightTestTimeduration

This object is used to configure the time duration of light test, 0s ~ 3600s,
0s means stopping the testing immidiately.

Integer32r/w

Constraints:
range: -1-3600

.1.3.6.1.4.1.2011.5.14.1.4.1.44

hwEthernetLightTestTestStatus

This object is used to configure the laser test status.
Options:
1. enable(1) - laser tx is enable
2. disable(2) - laser tx is disable
3. invalid(-1) - invalid value
Default:enable(1).

Enumerationr/w

Enumerated Values:

-1	invalid
1	enable
2	disable

.1.3.6.1.4.1.2011.5.14.1.4.1.45

hwEthernetLightTestFinshStatus

This object is used to configure the laser status after the test is completed.
Options:
1. enable(1) - laser tx is enable
2. disable(2) - laser tx is disable
3. original(3) - returned to its original s…

Enumerationr/w

Enumerated Values:

-1	invalid
1	enable
2	disable
3	original

.1.3.6.1.4.1.2011.5.14.1.4.1.46

hwifVLANTrunkStatusTable

table

.1.3.6.1.4.1.2011.5.14.1.5 · 1 row entry · 6 columns

Open in standard view

Indicates the VLAN trunk feature.
The index of this table is hwifVLANTrunkIndex.

hwifVLANTrunkStatusEntry entry .1.3.6.1.4.1.2011.5.14.1.5.1

Indicates the VLAN trunk feature.
The index of this entry is hwifVLANTrunkIndex.

Indexes

hwifVLANTrunkIndex

Column Syntax OID

hwifVLANTrunkIndex

Vlan trunk index
interface index of VLANTrunk

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2011.5.14.1.5.1.1

hwifVLANTrunkGvrpRegistration

GVRP registration information.
Options:
1. normal(1) -This is the default configration. Allow create, register and unretiser vlans dynamiclly at this port.
2. fixed(2) -Allow create and register vlan manully at t…

Enumerationr/w

Enumerated Values:

1	normal
2	fixed
3	forbidden

.1.3.6.1.4.1.2011.5.14.1.5.1.2

hwifVLANTrunkPassListLow

The low vlan trunk pass list.total vlan includes 8*255= 2040 vlan ids
Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 …

OctetString

.1.3.6.1.4.1.2011.5.14.1.5.1.3

hwifVLANTrunkPassListHigh

The high vlan trunk pass list. The total vlan includes 8*255= 2040 vlan ids
Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying po…

OctetString

.1.3.6.1.4.1.2011.5.14.1.5.1.4

hwifVLANTrunkAllowListLow

The low interface of vlan .total interface includes 8*255= 2040 vlan ids
Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports …

OctetStringr/w

.1.3.6.1.4.1.2011.5.14.1.5.1.5

hwifVLANTrunkAllowListHigh

The high inteface of vlan .total interface includes 8*255= 2040 vlan ids
Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports…

OctetStringr/w

.1.3.6.1.4.1.2011.5.14.1.5.1.6

hwBoardMacAddressLearningVlanConnectTable

table

.1.3.6.1.4.1.2011.5.14.1.11 · 1 row entry · 1 columns

Open in standard view

Used to enable or disable the MAC address learning function on S+C traffic streams.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwBoardMacAddressLearningVlanConnectEntry entry .1.3.6.1.4.1.2011.5.14.1.11.1

Used to enable or disable the MAC address learning function on S+C traffic streams.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column Syntax OID

hwBoardMacAddressLearningVlanConnectCtrl

Indicates the status of the the MAC address learning function on S+C traffic streams.
Options:
1. invalid(-1) -Indicates that the MAC address learning function on S+C traffic streams is unavailable.
2.…

Enumerationr/w

Enumerated Values:

-1	invalid
1	disable
2	enable
3	noconfig

.1.3.6.1.4.1.2011.5.14.1.11.1.1

hwMacHashConflictRecordTable

table

.1.3.6.1.4.1.2011.5.14.1.18 · 1 row entry · 6 columns

Open in standard view

Indicates the line parameter configuration table of an MAC hash conflict. 
It is used to query MAC hash congfig log. 
This table mainly involves configuring parameters such as MacAddress, Vlan, 
Location, DetectedTime, ResolvedTime.
The index of this table is hwMacHashConflictRecordIndex.

hwMacHashConflictRecordEntry entry .1.3.6.1.4.1.2011.5.14.1.18.1

Indicates the line parameter configuration table of an MAC hash conflict.
It is used to add, query, modify an MAC hash congfig log.
This table mainly involves configuring parameters such as MacAddress, Vlan,
Location…

Indexes

hwMacHashConflictRecordIndex

Column	Syntax	OID
hwMacHashConflictRecordIndex Indicates the index of the MAC hash conflict, bind MAC hash conflict identification.	Integer32 Constraints: `range: 1-50`	`.1.3.6.1.4.1.2011.5.14.1.18.1.1`
hwMacHashConflictRecordMacAddress The MAC address of an MAC hash conflict	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.2011.5.14.1.18.1.2`
hwMacHashConflictRecordVlan The conflict MAC binding vlan ID	Integer32 Constraints: `range: 1-4095`	`.1.3.6.1.4.1.2011.5.14.1.18.1.3`
hwMacHashConflictRecordLocation The location of detecting MAC hash conflict	OctetString	`.1.3.6.1.4.1.2011.5.14.1.18.1.4`
hwMacHashConflictRecordDetectedTime Indicates the time of detecting MAC hash conflict	SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime `OctetString` Type Constraints: `range: 8` `range: 11`	`.1.3.6.1.4.1.2011.5.14.1.18.1.5`
hwMacHashConflictRecordResolvedTime Indicates the time of resolving MAC hash conflict	SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime `OctetString` Type Constraints: `range: 8` `range: 11`	`.1.3.6.1.4.1.2011.5.14.1.18.1.6`

hwifXXTable

table

.1.3.6.1.4.1.2011.5.14.2.1 · 1 row entry · 10 columns

Open in standard view

Indicates the port information extension table, which is used to describe the port
extension features, such as whether a port is an aggregation port.
The index of this table is ifIndex.

hwifXXEntry entry .1.3.6.1.4.1.2011.5.14.2.1.1

Indicates the port information extension table, which is used to describe the port
extension features, such as whether a port is an aggregation port.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column Syntax OID

hwifAggregatePort

whether an Ethernet port is in an aggregation group and whether the port is a master member or slave member.
Options:
1. noAggregatePort(1) -Ethernet port is not in an aggregation
2. masterPort(2) -Ethernet port i…

Enumeration

Enumerated Values:

-1	invalid
1	noAggregatePort
2	masterPort
3	subPort

.1.3.6.1.4.1.2011.5.14.2.1.1.1

hwifMirrorPort

Whether it is a mirror port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.5.14.2.1.1.2

hwifUnknowncastControl

Unknown unicast suppression traffic node, in range of (5-100) %

Integer32r/w

Constraints:
range: 5-100

.1.3.6.1.4.1.2011.5.14.2.1.1.3

hwifMcastControl

Broadcast storm suppression, in range of (5-100) %.

Integer32r/w

Constraints:
range: 5-100

.1.3.6.1.4.1.2011.5.14.2.1.1.4

hwifFlowControl

Flow control status

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.5.14.2.1.1.5

hwifSrcMacControl

Whether the source MAC address is being filtered.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.5.14.2.1.1.6

hwifClearStat

Clear port statistics information.
Options:
1. clear(1) -In the set operation, clear port statistics information
2. invalid(-1) -In the get operation, the invalid value -1 is returned.

Enumerationr/w

Enumerated Values:

-1	invalid
1	clear

.1.3.6.1.4.1.2011.5.14.2.1.1.7

hwifLinkStateChangeNum

Short duration breaks in the link status

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.2.1.1.8

hwifLinkUpTime

Indicates the time since last link protocol reset/down

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.2.1.1.9

hwifClearCountTimeStamp

Gives the time at which the counters that measure cumulative statistics

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.2.1.1.10

hwifAggregateTable

table

.1.3.6.1.4.1.2011.5.14.2.2 · 1 row entry · 13 columns

Open in standard view

Indicates the aggregation management table of an Ethernet port. It implements
dividing multiple Ethernet ports into one aggregation group to realize
protection and load sharing among ports. After that, protection and load
sharing can be realized on the ports in an aggregation group.
The index of this table is hwifAggregateIndex.

hwifAggregateEntry entry .1.3.6.1.4.1.2011.5.14.2.2.1

Indexes

hwifAggregateIndex

Column Syntax OID

hwifAggregateIndex

IfIndex of the master port in an aggregation group.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2011.5.14.2.2.1.1

hwifAggregatePortName

Setting the description of a link-aggregation group of Ethernet ports.
Range: 0-40

OctetStringr/w

Constraints:
range: 0-40

.1.3.6.1.4.1.2011.5.14.2.2.1.2

hwifAggregatePortListPorts

The value of hwifAggregatePortListPorts is an octet string.
One bit in each octet indicates one port, so the octet string can indicate eight ports.
When a bit is set to 0, it indicates that the corresponding port does …

PortListr/w

Textual Convention: PortList OctetString

.1.3.6.1.4.1.2011.5.14.2.2.1.3

hwifAggregateModel

Mode of a link-aggregating group.
Options:
1. ingress(1) -load sharing only according to the source MAC
2. ingressEgress(2) -Ingress+egress, load sharing according to source MAC and the destination MAC
3. roundR…

Enumerationr/w

Enumerated Values:

1	ingress
2	ingressEgress
3	roundRobin
4	egress
5	mplsLabel
6	srcDstIp
7	ipEnhance

.1.3.6.1.4.1.2011.5.14.2.2.1.4

hwifAggregateRowStatus

The present operation status of the row.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.2.2.1.5

hwifAggregateWorkMode

Workmode of a link-aggregation.
Options:
1. manual(1) -manual link aggregation
2. lacpStatic(2) -lacp static link aggregation

Enumerationr/w

Enumerated Values:

1	manual
2	lacpStatic

.1.3.6.1.4.1.2011.5.14.2.2.1.6

hwifAggregateOperType

Operation type of link-aggregation, use hwifAggregatePortListPorts note to set the
port list to be added/deleted in an aggregation group.
Options:
1. add(1) -add port(s) to a link-aggregation
2. del(2) -delet…

Enumerationr/w

Enumerated Values:

-1	invalid
1	add
2	del

.1.3.6.1.4.1.2011.5.14.2.2.1.7

hwifAggregateMaxLinkNum

Setting the maximum number of links in an aggregation group.
When you add an aggregation group, hwifAggregateMaxLinkNum is optional,
If this leaf is not set, the value is 255 by default.
Only when hwifAggregateWorkMod…

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.14.2.2.1.8

hwifAggregateMasterPortIndex

IfIndex of the master port in an aggregation group.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2011.5.14.2.2.1.9

hwifAggregateLeastLinkNum

Setting the least number of links in an aggregation group.
When you add an aggregation group, hwifAggregateLeastLinkNum is optional,
If this leaf is not set, the value is 255 by default.
Only when hwifAggregateWorkMod…

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.14.2.2.1.10

hwifAggregateHashOption

Setting the hash option algorithm of a link-aggregating group.
Options:
1. default(1) -Indicates the default route selection algorithm.
2. crc(2) -Indicates that the CRC algorithm is used to calculate packets outgo…

Enumerationr/w

Enumerated Values:

1	default
2	crc
3	xor8
4	xor3

.1.3.6.1.4.1.2011.5.14.2.2.1.11

hwifAggregateRandomSeed

Setting the random seed value of the link-aggregation group.
When you add an aggregation group, hwifAggregateRandomSeed is optional,
If this leaf is not set, the value is 0 by default.
Range: 0-15
Default: 0

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.2011.5.14.2.2.1.12

hwifAggregateStatus

Indicates the forwarding status of the link-aggregation group.

Enumeration

Enumerated Values:

1	forwarding
2	block

.1.3.6.1.4.1.2011.5.14.2.2.1.13

hwMacToVlanTable

table

.1.3.6.1.4.1.2011.5.14.2.3 · 1 row entry · 4 columns

Open in standard view

Indicates VLAN and the ID list of PVC according to the MAC address.
The index of this table is hwMacAddress.

hwMacToVlanEntry entry .1.3.6.1.4.1.2011.5.14.2.3.1

Indicates VLAN and the ID list of PVC according to the MAC address.
The index of this entry is hwMacAddress.

Indexes

hwMacAddress

Column	Syntax	OID
hwMacAddress The MAC learned by the system	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.2011.5.14.2.3.1.1`
hwInterface the interface index related to the port	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.2.3.1.2`
hwMacToVlanId Mac binding vlan ID	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.2.3.1.3`
hwConnectId the atm pvc connect id of the port if it used as atm interface	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.2.3.1.4`

hwIfEthernetMirrorTable

table

.1.3.6.1.4.1.2011.5.14.2.4 · 1 row entry · 2 columns

Open in standard view

Ethernet interface mirror table.
The index of this table is hwifEthernetMirrorDstPort.

hwIfEthernetMirrorEntry entry .1.3.6.1.4.1.2011.5.14.2.4.1

Ethernet interface mirror table.
The index of this entry is hwifEthernetMirrorDstPort.

Indexes

hwifEthernetMirrorDstPort

Column	Syntax	OID
hwifEthernetMirrorDstPort Destination mirror port, whose format is the same as ifIndex	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.2.4.1.1`
hwifEthernetMirrorSrcPort The mirror port to the source port	PortListr/w Textual Convention: PortList `OctetString`	`.1.3.6.1.4.1.2011.5.14.2.4.1.2`

hwifXStatTable

table

.1.3.6.1.4.1.2011.5.14.2.5 · 1 row entry · 27 columns

Open in standard view

Table of the FE/GE interface statistics.
An interface containing objects at the
subnetwork layer and below for a particular
interface.
The index of this table is ifIndex.

hwifXStatEntry entry .1.3.6.1.4.1.2011.5.14.2.5.1

Table of the FE/GE interface statistics.
An interface containing objects at the
subnetwork layer and below for a particular
interface.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwifInArpPkts The total number of arp packets received on the interface	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.1`
hwifInIcmpkts The total number of icmp packets received on the interface	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.2`
hwifOutArpPkts The total number of arp packets transmitted out of the interface	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.3`
hwifOutIcmpPkts The total number of icmp packets transmitted out of the interface	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.4`
hwifOutCRCAlignErrors The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number…	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.5`
hwifOutUndersizePkts The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.6`
hwifOutOversizePkts The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.7`
hwifOutFragments The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error…	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.8`
hwifOutJabbers The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or…	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.9`
hwifOutCollisions The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) o…	CollisionsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.10`
hwifOutPkts64Octets The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.11`
hwifOutPkts65to127Octets The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.12`
hwifOutPkts128to255Octets The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.13`
hwifOutPkts256to511Octets The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.14`
hwifOutPkts512to1023Octets The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.15`
hwifOutPkts1024to1518Octets The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.16`
hwifInCRCAlignErrors The total number of packets send that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of …	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.17`
hwifInUndersizePkts The total number of packets send that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.18`
hwifInOversizePkts The total number of packets send that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.19`
hwifInFragments The total number of packets send that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or…	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.20`
hwifInJabbers The total number of packets send that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a b…	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.21`
hwifInPkts64Octets The total number of packets (including bad packets) send that were 64 octets in length (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.22`
hwifInPkts65to127Octets The total number of packets (including bad packets) send that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.23`
hwifInPkts128to255Octets The total number of packets (including bad packets) send that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.24`
hwifInPkts256to511Octets The total number of packets (including bad packets) send that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.25`
hwifInPkts512to1023Octets The total number of packets (including bad packets) send that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.26`
hwifInPkts1024to1518Octets The total number of packets (including bad packets) send that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.2.5.1.27`

hwBoardBindTable

table

.1.3.6.1.4.1.2011.5.14.2.6 · 1 row entry · 9 columns

Open in standard view

Indicates the board bonding table. It is used for setting the bonding between boards.
In addition, it supports the query of the status of the interconnected ports on bound
boards. When you need to bind two boards or query the status of the interconnected
ports on either board, use this table. The bound boards can be configured with inter-board
aggregation and service configuration commands are delivered to the two boards.
The index of this table is hwBindBrdFSIndex.

hwBoardBindEntry entry .1.3.6.1.4.1.2011.5.14.2.6.1

Indexes

hwBindBrdFSIndex

Column Syntax OID

hwBindBrdFSIndex

Ifindex of bound board in left slot.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2011.5.14.2.6.1.1

hwBindBrdAnotherFSIndex

Ifindex of bound board in right slot.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.2.6.1.2

hwLeftBrdLinkStatus

Link status of bound board in left slot.
1:link up 2:link down 2: default

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.2.6.1.3

hwRightBrdLinkStatus

Link status of bound board in right slot.
1:link up 2:link down 2: default

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.2.6.1.4

hwBoardBindRowStatus

The present operation status of the row.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.2.6.1.5

hwLeftBrdPrimaryStatus

The primary status of the Board. This parameter indicates the current overall
service condition of an entity, i.e., whether it is in-service or out-of-service.
Options:
1. isNr(1) - In service, normal
2. isAnr(2) …

Enumeration

Enumerated Values:

1	isNr
2	isAnr
3	isRst
4	isAnrst
5	oosAu
6	oosMa
7	oosAuma
8	oosAurst
9	oosMaanr

.1.3.6.1.4.1.2011.5.14.2.6.1.6

hwLeftBrdSecondaryStatus

This parameter indicates the secondary status of the board. The parameter provides additional
information pertaining to PST and PSTQ. For example, it may indicate the type and/or reason of
the external command, the even…

Bits

Enumerated Values:

0	sstAins
1	sstFaf
2	sstFlt
3	sstLpbk
4	sstMea
5	sstSgeo
6	sstStbyh
7	sstTs
8	sstUas
9	sstUeq
10	sstWrk
11	sstPwr

.1.3.6.1.4.1.2011.5.14.2.6.1.7

hwRightBrdPrimaryStatus

Enumeration

Enumerated Values:

1	isNr
2	isAnr
3	isRst
4	isAnrst
5	oosAu
6	oosMa
7	oosAuma
8	oosAurst
9	oosMaanr

.1.3.6.1.4.1.2011.5.14.2.6.1.8

hwRightBrdSecondaryStatus

Bits

Enumerated Values:

0	sstAins
1	sstFaf
2	sstFlt
3	sstLpbk
4	sstMea
5	sstSgeo
6	sstStbyh
7	sstTs
8	sstUas
9	sstUeq
10	sstWrk
11	sstPwr

.1.3.6.1.4.1.2011.5.14.2.6.1.9

hwVlanLoopTable

table

.1.3.6.1.4.1.2011.5.14.2.7 · 1 row entry · 9 columns

Open in standard view

Interface Vlan Loop table entry
The index of this table is hwVlanLoopIndex

hwVlanLoopEntry entry .1.3.6.1.4.1.2011.5.14.2.7.1

Interface Vlan Loop table entry
The index of this entry is hwVlanLoopIndex

Indexes

hwVlanLoopIndex

Column Syntax OID

hwVlanLoopIndex

Indicates the vlan loop index, a unique value to identify the vlan loop.
Recently, the index value can only be fixed to 1.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.2.7.1.1

hwVlanLoopSrcIfIndex

Source vlan loop port, whose format is the same as ifIndex

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.2.7.1.2

hwVlanLoopSrcOuterVlanId

The outer vlan id of the source port , the bound of parameter is 1 to 4095

Integer32r/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.2011.5.14.2.7.1.3

hwVlanLoopSrcInnerVlanId

The inner vlan id of the source port , the bound of patameter is 1 to 4095

Integer32r/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.2011.5.14.2.7.1.4

hwVlanLoopDstIfIndex

The destination vlan loop port, whose format is the same as ifIndex

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.2.7.1.5

hwVlanLoopDstOuterVlanId

The outer vlan id of the destination port , the bound of patameter is 1 to 4095

Integer32r/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.2011.5.14.2.7.1.6

hwVlanLoopDstInnerVlanId

The inner vlan id of the destination port , the bound of patameter is 1 to 4095

Integer32

Constraints:
range: 1-4095

.1.3.6.1.4.1.2011.5.14.2.7.1.7

hwVlanLoopTimeout

The remain time of the vlan loop before stopped.
Recently, this leaf is not supported.
Unit: second

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.2.7.1.8

hwVlanLoopRowStatus

Indicates the row status.
To create vlan loop, set this leaf to createAndGo(4).
To delete vlan loop, set this leaf to destroy(6).
When this leaf is queried, the value is fixed to active(1).
Options:
1. active(1) …

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.2.7.1.9

hwAggregateStatisticsTable

table

.1.3.6.1.4.1.2011.5.14.2.9 · 1 row entry · 39 columns

Open in standard view

A collection of statistics kept for an aggregation.
The value of statistics is the sum of all etherports under an aggregation.
The index of this table is hwAggStatsIndex.

hwAggregateStatisticsEntry entry .1.3.6.1.4.1.2011.5.14.2.9.1

A collection of statistics kept for an aggregation.
The value of statistics is the sum of all etherports under an aggregation.
The index of this entry is hwAggStatsIndex.

Indexes

hwAggStatsIndex

Column Syntax OID

hwAggStatsIndex

The value of this object(ifindex) uniquely identifies this
aggregate entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.2.9.1.1

hwAggStatsDropEvents

The total number of events in which packets
were dropped by the probe due to lack of resources.
Note that this number is not necessarily the number of
packets dropped; it is just the number of times this
condition has b…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.2

hwAggStatsRecvOctets

The total number of octets of data (including
those in bad packets) received on the
network (excluding framing bits but including
FCS octets).
'18446744073709551615' means invalid value.

OctetsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.3

hwAggStatsSendOctets

The total number of octets of data (including
those in bad packets) sent on the
network (excluding framing bits but including
FCS octets).
'18446744073709551615' means invalid value.

OctetsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.4

hwAggStatsTotalOctets

The total number of octets of data (including
those in bad packets) on the
network (excluding framing bits but including
FCS octets).
'18446744073709551615' means invalid value.

OctetsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.5

hwAggStatsRecvPkts

The total number of packets (including bad packets,
broadcast packets, and multicast packets) received.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.6

hwAggStatsSendPkts

The total number of packets (including bad packets,
broadcast packets, and multicast packets) sent.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.7

hwAggStatsTotalPkts

The total number of packets (including bad packets,
broadcast packets, and multicast packets).
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.8

hwAggStatsBroadcastRecvPkts

The total number of good packets received that were
directed to the broadcast address. Note that this
does not include multicast packets.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.9

hwAggStatsBroadcastSendPkts

The total number of good packets send that were
directed to the broadcast address. Note that this
does not include multicast packets.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.10

hwAggStatsBroadcastTotalPkts

The total number of good packets that were
directed to the broadcast address. Note that this
does not include multicast packets.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.11

hwAggStatsMulticastRecvPkts

The total number of good packets received that were
directed to a multicast address. Note that this number
does not include packets directed to the broadcast
address.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.12

hwAggStatsMulticastSendPkts

The total number of good packets sent that were
directed to a multicast address. Note that this number
does not include packets directed to the broadcast
address.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.13

hwAggStatsMulticastTotalPkts

The total number of good packets that were
directed to a multicast address. Note that this number
does not include packets directed to the broadcast
address.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.14

hwAggStatsCRCAlignErrors

The total number of packets received that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but had either a bad
Frame Check Sequence (FCS) with an integral
number…

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.15

hwAggStatsUndersizePkts

The total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.16

hwAggStatsOversizePkts

The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets) and were otherwise
well formed.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.17

hwAggStatsFragments

The total number of packets received that were less than
64 octets in length (excluding framing bits but including
FCS octets) and had either a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error…

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.18

hwAggStatsJabbers

The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or…

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.19

hwAggStatsCollisions

The best estimate of the total number of collisions
on this Ethernet segment.

The value returned will depend on the location of the
RMON probe. Section 8.2.1.3 (10BASE-5) and section
10.3.1.3 (10BASE-2) o…

CollisionsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.20

hwAggStatsPkts64Octets

The total number of packets (including bad
packets) received that were 64 octets in length
(excluding framing bits but including FCS octets).
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.21

hwAggStatsPkts65to127Octets

The total number of packets (including bad
packets) received that were between
65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets).
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.22

hwAggStatsPkts128to255Octets

The total number of packets (including bad
packets) received that were between
128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets).
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.23

hwAggStatsPkts256to511Octets

The total number of packets (including bad
packets) received that were between
256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets).
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.24

hwAggStatsPkts512to1023Octets

The total number of packets (including bad
packets) received that were between
512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets).
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.25

hwAggStatsPkts1024to1518Octets

The total number of packets (including bad
packets) received that were between
1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets).
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.26

hwAggStatsPkts1519to2047Octets

Total number of frames of 1519-2047 bytes.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.27

hwAggStatsPkts2048to4095Octets

Total number of frames of 2048-4095 bytes.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.28

hwAggStatsPkts4096to9216Octets

Total number of frames of 4096-9216 bytes.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.29

hwAggStatsPktsRecvPauseInfo

Number of PAUSE frames received by the port.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.30

hwAggStatsPktsSendPauseInfo

Number of PAUSE frames send from the port.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.31

hwAggStatsPktsSendSingleCollisionInfo

The total number of packets sent correctly after a single collision.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.32

hwAggStatsPktsSendMultiCollisionInfo

The total number of packets sent correctly after multiple collisions.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.33

hwAggStatsUpDiscardPacketsInfo

The total number of up stream discarded packets.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.34

hwAggStatsDownDiscardPacketsInfo

The total number of down stream discarded packets.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.35

hwAggStatsAlignmentErrorFramesInfo

The total number of alignment error frames.
'18446744073709551615' means invalid value.

FramesSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.36

hwAggStatsSpeed

The total speed of Aggregate ports.

KbpsSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.2.9.1.37

hwAggStatsOutboundErrors

The total number of outbound packets that could not be transmitted because of errors.
'18446744073709551615' means invalid value.

PacketsSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.2.9.1.38

hwAggStatsClear

Clear aggregate port statistics information.
Options:
1. clear(1) -In the set operation, clear port statistics information
2. invalid(-1) -In the get operation, the invalid value -1 is returned.

Enumerationr/w

Enumerated Values:

-1	invalid
1	clear

.1.3.6.1.4.1.2011.5.14.2.9.1.100

hwBoardSpeedModeTable

table

.1.3.6.1.4.1.2011.5.14.2.10 · 1 row entry · 1 columns

Open in standard view

Indicates the speed mode of the board.
The index of this table is hwFrameIndex and hwSlotIndex.

hwBoardSpeedModeEntry entry .1.3.6.1.4.1.2011.5.14.2.10.1

Indicates the speed mode of the board.
The index of this entry is hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column	Syntax	OID
hwBoardSpeedMode The speed mode of the board. Options: 1: port 0-7 GE(1) 2: port 0-7 10GE(2) 3: port 0-3 GE, port 4-7 10GE(3) Default: port 0-7 GE(1).	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.2.10.1.1`

hwAggLoadbalancingConfigTable

table

.1.3.6.1.4.1.2011.5.14.2.13 · 1 row entry · 12 columns

Open in standard view

This table is used to manage the configuration information of an aggregation group loadbalancing.
The index of this table is hwAggLBConfigIndex.

hwAggLoadbalancingConfigEntry entry .1.3.6.1.4.1.2011.5.14.2.13.1

This table is used to manage the configuration information of an aggregation group loadbalancing.
The index of this entry is hwAggLBConfigIndex.

Indexes

hwAggLBConfigIndex

Column Syntax OID

hwAggLBConfigIndex

IfIndex of the master port in an aggregation group.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.2.13.1.1

hwAggLBSrcMacAddress

The source MAC address of the packet.
The following is an example of the input format of the MAC address:
If the MAC address is 00e0-fc11-0000, enter # 0x00 0xe0 0xfc 0x11 0x00 0x00 or the character string 00-e0-fc-11-…

OctetStringr/w

Constraints:
range: 6-17

.1.3.6.1.4.1.2011.5.14.2.13.1.2

hwAggLBDstMacAddress

The destination MAC address of the packet.
The following is an example of the input format of the MAC address:
If the MAC address is 00e0-fc11-0000, enter # 0x00 0xe0 0xfc 0x11 0x00 0x00 or the character string 00-e0-f…

OctetStringr/w

Constraints:
range: 6-17

.1.3.6.1.4.1.2011.5.14.2.13.1.3

hwAggLBIpAddressType

Indicates the IP address type.
Options:
1. ipv4(1) -indicates that the IP address type is ipv4
2. ipv6(2) -indicates that the IP address type is ipv6

Enumerationr/w

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.2011.5.14.2.13.1.4

hwAggLBProtocol

The protocol of the IP packets.
Range: 0-255

The common types include:
ICMP: indicates the Internet Control Message Protocol with protocol ID 1
IGMP: indicates the Internet Group manageme…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.5.14.2.13.1.5

hwAggLBSrcIpAddress

The source IPv4 address of the packet.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.5.14.2.13.1.6

hwAggLBDstIpAddress

The destination IPv4 address of the packet.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.5.14.2.13.1.7

hwAggLBSrcIpv6Address

The source IPv6 address of the packet.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.14.2.13.1.8

hwAggLBDstIpv6Address

The destination IPv6 address of the packet.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.14.2.13.1.9

hwAggLBSrcPort

The specify source port of the packet.
Range: 0-65535

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.5.14.2.13.1.10

hwAggLBDstPort

The specify destination port of the packet.
Range: 0-65535

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.5.14.2.13.1.11

hwAggLBInportIndex

IfIndex of the input port.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.2.13.1.12

hwAggLoadbalancingTable

table

.1.3.6.1.4.1.2011.5.14.2.14 · 1 row entry · 2 columns

Open in standard view

This table is used to get the result of the packet selection port for an aggregation group.
The index of this table is hwAggLBIndex.

hwAggLoadbalancingEntry entry .1.3.6.1.4.1.2011.5.14.2.14.1

This table is used to get the result of the packet selection port for an aggregation group.
The index of this entry is hwAggLBIndex.

Indexes

hwAggLBIndex

Column	Syntax	OID
hwAggLBIndex IfIndex of the master port in an aggregation group.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.2.14.1.1`
hwAggLBSelectIndex The result of the packet selection port for an aggregation group.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.2.14.1.2`

hwAggregatePortTable

table

.1.3.6.1.4.1.2011.5.14.2.15 · 1 row entry · 3 columns

Open in standard view

Indicates the port information of an aggregation group. 
The indexes of this table are hwAggregateIndex and hwAggregatePortIndex.

hwAggregatePortEntry entry .1.3.6.1.4.1.2011.5.14.2.15.1

Indicates the port information of an aggregation group.
The indexes of this entry are hwAggregateIndex and hwAggregatePortIndex.

Indexes

hwAggregateIndex hwAggregatePortIndex

Column Syntax OID

hwAggregateIndex

IfIndex of the master port in an aggregation group.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2011.5.14.2.15.1.1

hwAggregatePortIndex

IfIndex of the port in an aggregation group.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2011.5.14.2.15.1.2

hwAggregatePortStatus

Indicates the forwarding status of port in an aggregation group.
Options:
1. forwarding(1) -Indicates that the forwarding status of the port in an aggregation group is forwarding.
2. block(2) -Indicates that the …

Enumeration

Enumerated Values:

1	forwarding
2	block

.1.3.6.1.4.1.2011.5.14.2.15.1.3

hwIpdslamConnectTable

table

.1.3.6.1.4.1.2011.5.14.3.1 · 1 row entry · 10 columns

Open in standard view

Indicates the table that contains certain extended attributes of a service flow.
The index of this table is hwIpdslamConnectIndex.

hwIpdslamConnectEntry entry .1.3.6.1.4.1.2011.5.14.3.1.1

Indicates the table that contains certain extended attributes of a service flow.
The index of this entry is hwIpdslamConnectIndex.

Indexes

hwIpdslamConnectIndex

Column Syntax OID

hwIpdslamConnectIndex

For the broadband service, this leaf is the same as hwExtSrvFlowIndex,
which indicates the service flow index,
a unique value to identify a service flow.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.1.1.1

hwIpdslamConnectFlowControl

Enable/disable the connection flow control, and the source destination direction is determined by the direction created by PVC.
The connect flow control.
Options:
1. bothOff(1) -The value is not support…

Enumerationr/w

Enumerated Values:

1	bothOff
2	srcDown
3	dstDown
4	srcDownAndDstDown
5	srcUp
6	srcBoth
7	srcUpAndDstDown
8	srcBothAndDstDown
9	dstUp
10	dstUpAndSrcDown
11	dstBoth
12	dstBothAndSrcDown
13	dstUpAndSrcUp
14	dstUpAndSrcBoth
15	dstBothAndSrcUp
16	dstBothAndSrcBoth

.1.3.6.1.4.1.2011.5.14.3.1.1.2

hwIpdslamConnectMaxMacLearn

Indicates the maximum number of learnable MAC addresses of the service port.
Due to different hardware capabilities, the ports of different types support
different value ranges. The ATM or xDSL port supports the range …

Integer32r/w

Constraints:
range: -1-1023

.1.3.6.1.4.1.2011.5.14.3.1.1.3

hwIpdslamConnectMacLearnd

The number of MACs this connection has learned.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.1.1.4

hwIpdslamConnectPriorityLevel

The priority of this connection.
Options:
1. high(1) -The value is not supported.
2. low(2) -The value is not supported.
Before the priority function is enabled in LAN, the order of priority for each connection in …

Enumerationr/w

Enumerated Values:

1	high
2	low

.1.3.6.1.4.1.2011.5.14.3.1.1.5

hwIpdslamConnectSrcVportPhysical

The source virtual physical port of this connection.
The port can't be bigger than or equal to 65535.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.1.1.6

hwIpdslamConnectDstVportPhysical

The destination virtual physical port of this connection.
The port can't be bigger than or equal to 65535.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.1.1.7

hwIpdslamConnectInnerVlanId

Indicates the network-side inner VLAN ID of switch-oriented service flow.
The value of this leaf is variable with the value of hwExtSrvFlowTagTransform.
If the value of hwExtSrvFlowTagTransform is set to 3, 4, 5, this l…

Integer32r/w

Constraints:
range: -1-4095

.1.3.6.1.4.1.2011.5.14.3.1.1.8

hwIpdslamConnectInnerVlanPriority

Indicates the network-side inner VLAN priority of switch-oriented service flow.
The value of this leaf is variable with the value of hwExtSrvFlowTagTransform.
If the value of hwExtSrvFlowTagTransform is set to 3, 4, 5, …

Integer32r/w

Constraints:
range: 0-7
range: 255-255

.1.3.6.1.4.1.2011.5.14.3.1.1.9

hwIpdslamConnectMulticastForwardingMode

The flag of Multicast forwarding mode on service board.
Options:
1. outervlan(1) -Indicates outer VLAN.
2. outervlanInnervlan(2) -Indicates outer VLAN and inner VLAN.

Enumerationr/w

Enumerated Values:

1	outervlan
2	outervlanInnervlan

.1.3.6.1.4.1.2011.5.14.3.1.1.10

hwIpdslamBindIpTable

table

.1.3.6.1.4.1.2011.5.14.3.2 · 1 row entry · 8 columns

Open in standard view

Used for binding an IP address to a service port. To statically configure the permitted IP address of
a service port, use this table.
After the IP address is bound to a service port successfully, the device allows only the upstream packets
whose source IP address is the bound IP address to pass.
The indexes of this table are hwIpdslamBindIpConnectIndex and hwIpdslamBindIpSubIndex, indicating the index of the service port.
The service port corresponding to this index must already be created in hwExtSrvFlowEntry.
hwIpdslamBindIpSubIndex is the index used for specifying the position on the service port for binding the
IP address.

hwIpdslamBindIpEntry entry .1.3.6.1.4.1.2011.5.14.3.2.1

Indexes

hwIpdslamBindIpConnectIndex hwIpdslamBindIpSubIndex

Column Syntax OID

hwIpdslamBindIpConnectIndex

Indicates the index of the service port bound to a specified IP address.
The service port corresponding to this index must already be created in
hwExtSrvFlowEntry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.2.1.1

hwIpdslamBindIpSubIndex

This index is used for specifying the position on the service port for binding the IP address.
hwIpdslamBindIpSubIndex is filled with -1, all IP addresses of the service port are deleted.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.2.1.2

hwIpdslamBindIpAddress

Indicates the IP address bound to a specified service port.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.5.14.3.2.1.3

hwIpdslamBindIpAddressRowStatus

Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
During creation, hwIpdslamBindIpSubIndex may not be specified and can be
automatically allocated by the system. In this case, you can fil…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.2.1.4

hwIpdslamBindIpAddressType

Indicates the IP address type to bind.
Options:
1. ipv4(1) -indicates that the IP address type is ipv4
2. ipv6(2) -indicates that the IP address type is ipv6
During creation, if hwIpdslamBindIpAddressType is not spe…

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.14.3.2.1.5

hwIpdslamBindIpv6Address

Indicates the IPv6 address bound to a specified service port.
It must be a valid unicast IPv6 address.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.14.3.2.1.6

hwIpdslamBindIpv6PrefixLength

Indicates the prefix length of the IPv6 address bound to a specified service port.
i.e. Valid value only includes 48,56,60,64 and 128.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.3.2.1.7

hwIpdslamBindIpMaskLength

Indicates the Mask length of the IPv4 address bound to a specified service port.
Range: 17-32.
The invalid value is 4294967295.

Unsigned32r/w

Constraints:
range: 17-32
range: 4294967295-4294967295

.1.3.6.1.4.1.2011.5.14.3.2.1.8

hwIpdslamBindMacTable

table

.1.3.6.1.4.1.2011.5.14.3.3 · 1 row entry · 4 columns

Open in standard view

Indicates MAC address binding feature.
The indexes of this table are hwIpdslamBindMacConnectIndex and hwIpdslamBindMacSubIndex.

hwIpdslamBindMacEntry entry .1.3.6.1.4.1.2011.5.14.3.3.1

Indicates MAC address binding feature.
The indexes of this entry are hwIpdslamBindMacConnectIndex and hwIpdslamBindMacSubIndex.

Indexes

hwIpdslamBindMacConnectIndex hwIpdslamBindMacSubIndex

Column Syntax OID

hwIpdslamBindMacConnectIndex

Bind MAC address connect identification

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.3.1.1

hwIpdslamBindMacSubIndex

Bind MAC address sub index

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.3.1.2

hwIpdslamBindMacAddress

The MAC address to bind

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.2011.5.14.3.3.1.3

hwIpdslamBindMacAddressRowStatus

Bind MAC address operate (add(4),delete(6))

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.3.1.4

hwIpTrafficParamTable

table

.1.3.6.1.4.1.2011.5.14.3.8 · 1 row entry · 29 columns

Open in standard view

Indicates the IP traffic profile. 
It is used to add, query, modify, or delete an IP traffic profile. 
This table mainly involves configuring CAR parameters such as CIR, PIR, 
CBS, and PBS and re-marking priority. 
The index of this table is hwIpTrafficIndex.

hwIpTrafficParamEntry entry .1.3.6.1.4.1.2011.5.14.3.8.1

Indicates the IP traffic profile.
It is used to add, query, modify, or delete an IP traffic profile.
This table mainly involves configuring CAR parameters such as CIR, PIR,
CBS, and PBS and re-marking priority.
The …

Indexes

hwIpTrafficIndex

Column Syntax OID

hwIpTrafficIndex

Indicates the table index.
Range: 1-1024, -1
When creating an IP traffic profile, you can specify or not specify a profile index.
If you specify it to 4294967295, the system will automatically allocates an idle index.
…

Integer32

Constraints:
range: -1--1
range: 1-1024

.1.3.6.1.4.1.2011.5.14.3.8.1.1

hwIpTrafficName

Indicates the traffic table name.
Each IP traffic profile has a unique name. When creating an IP traffic profile,
you can specify or not specify a profile name. If you do not specify it,
the system automatically gene…

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.5.14.3.8.1.2

hwIpTrafficCir

Indicates the committed information rate (CIR).
Range: -1, 0-10240000 kbit/s.
Unit: kbit/s.
CIR is a mandatory parameter. This parameter must be an integer multiple of 64.
If the entered value is not an integer multip…

Integer32r/w

Constraints:
range: -1-10240000

.1.3.6.1.4.1.2011.5.14.3.8.1.3

hwIpTrafficCbs

Indicates the committed burst size (CBS).
Range: -1, 0-1024000000 bytes.
Unit: bytes.
CBS is an optional parameter. If the parameter is not specified,
it can be obtained by formula min(2000+cir*32,1024000000).
For boa…

Integer32r/w

Constraints:
range: -1-1024000000

.1.3.6.1.4.1.2011.5.14.3.8.1.4

hwIpTrafficPir

Indicates the peak information rate (PIR).
Range: -1, 64-10240000 kbit/s.
Unit: kbit/s.
PIR is an optional parameter. If the parameter is not specified,
it can be obtained through formula max(min(2*cir,10240000),64).
…

Integer32r/w

Constraints:
range: -1--1
range: 64-10240000

.1.3.6.1.4.1.2011.5.14.3.8.1.5

hwIpTrafficPbs

Indicates the peak burst size (PBS).
Range: -1, 2000-1024000000 bytes.
Unit: bytes.
PBS is an optional parameter.If the parameter is not specified,
it can be obtained by formula min(2000+32*pir,1024000000).
-1 indicat…

Integer32r/w

Constraints:
range: -1--1
range: 2000-1024000000

.1.3.6.1.4.1.2011.5.14.3.8.1.6

hwIpTrafficCm

Indicates the color-aware mode of the IP traffic profile.
Options:
1. colorBlind(1) -Indicates color blind mode.
2. colorAware(2) -Indicates color aware mode.

Enumerationr/w

Enumerated Values:

1	colorBlind
2	colorAware

.1.3.6.1.4.1.2011.5.14.3.8.1.7

hwIpTrafficPriority

Indicates the outer priority of the IP traffic profile.
The higher 16 bits indicate the outer priority mapping policy and the lower 16 bits indicate the outer priority.
The outer priority storage mode of the IP traffi…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.8.1.8

hwIpTrafficPriorityPolicy

Indicates the queue-joining trust priority policy of the IP traffic profile.
Options:
1. localPriority(1) -Indicates the queue-joining trust the priority set by IP traffic profile.
2. egressOuter802dot1p(…

Enumerationr/w

Enumerated Values:

1	localPriority
2	egressOuter802dot1p
3	inner802dot1p
4	ingressOuter802dot1p
5	queuePolicyProfile

.1.3.6.1.4.1.2011.5.14.3.8.1.9

hwIpTrafficRowStatus

Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create an IP traffic profile, set this leaf to createAndGo(4);
to delete an IP traffic profile, set this leaf to destroy(6).
When …

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.8.1.10

hwIpTrafficInnerPriority

Indicates the inner priority of the IP traffic profile.
The higher 16 bits indicate the inner priority mapping policy and the lower 16 bits indicate the inner priority.
The inner priority storage mode of the IP traffi…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.8.1.11

hwIpTrafficInnerPriorityMappingIndex

When the inner VLAN priority mapping policy is mapping from the outer or inner CoS domain on the ingress,
the index (range: 1-4) of the service port priority mapping profile is used.
The referenced service port priori…

Integer32r/w

Constraints:
range: -1--1
range: 1-4

.1.3.6.1.4.1.2011.5.14.3.8.1.12

hwIpTrafficPriorityMappingIndex

When the outer VLAN priority mapping policy is mapping from the outer or inner CoS domain on the ingress,
the index (range: 1-4) of the service port priority mapping profile is used.
The referenced service port priori…

Integer32r/w

Constraints:
range: -1--1
range: 1-4

.1.3.6.1.4.1.2011.5.14.3.8.1.13

hwIpTrafficColorPolicy

Indicates the color policy of the IP traffic profile.
Options:
1. dei(1) -Indicate the dei mode.
2. cos(2) -Indicate the CoS mode.

Enumerationr/w

Enumerated Values:

1	dei
2	cos

.1.3.6.1.4.1.2011.5.14.3.8.1.14

hwIpTrafficCarThresholdProfileIndex

Indicates the car-threshold profile of the IP traffic profile

Integer32r/w

Constraints:
range: -1--1
range: 1-4

.1.3.6.1.4.1.2011.5.14.3.8.1.15

hwIpTrafficFixBandWidth

Indicates the fixed bandwidth to be allocated by the DBA. This parameter takes effect to the E2E service flow only on a GPON board.
Range: -1, 0-10240000 kbit/s.
Unit: kbit/s.
hwIpTrafficFixBandWidth must be smaller tha…

Integer32r/w

Constraints:
range: -1-10240000

.1.3.6.1.4.1.2011.5.14.3.8.1.16

hwIpTrafficCouplingFlag

The Coupling Flag CF is set to either 0 or 1. The choice of the value for CF has the effect of controlling the volume of the yellow
Service Frames admitted to the network. When CF is set to 0, the long term average bit…

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2011.5.14.3.8.1.17

hwIpTrafficDSCP

Indicates the DSCP source.
The most significant 16 bits indicate the DSCP policy, and the least significant 16 bits indicate the DSCP value.
--------------------------------------------------------
| …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.8.1.18

hwIpTrafficDSCPMappingIndex

Indicates the index of the referenced DSCP mapping profile.
When the hwIpTrafficDSCP is set to user-dscp(OxFE), the mapping profile index must be set to a valid profile.
When the hwIpTrafficDSCP is not set to user-dscp…

Integer32r/w

Constraints:
range: -1--1
range: 1-4

.1.3.6.1.4.1.2011.5.14.3.8.1.19

hwIpTrafficDropPrecedence

Indicates the packet discarding policy.
Options:
1. invalid(-1) -indicates that this function is not supported.
2. remarkedOuterPriority(0) -indicates that the internal packet discarding priority is the priority o…

Enumerationr/w

Enumerated Values:

-1	invalid
0	remarkedOuterPriority
1	remarkedInnerPriority

.1.3.6.1.4.1.2011.5.14.3.8.1.20

hwIpTrafficColorDEI

Indicates the color mark. It indicates whether and where the color is marked.
Options:
1. unmarkDei(0) -indicates that the color is not marked.
2. outerDei(1) -indicates that the color is marked on the outer …

Enumerationr/w

Enumerated Values:

0	unmarkDei
1	outerDei
2	innerDei
3	outerInnerDei

.1.3.6.1.4.1.2011.5.14.3.8.1.21

hwIpTrafficColorSource

Indicates the color source. It indicates where the color is marked.
Default: outerDei(1).
Options:
1. invalid(-1) -invalid value.
2. outerDei(1) -indicates that the color is marked on the outer VLAN's DEI.
3.…

Enumerationr/w

Enumerated Values:

-1	invalid
1	outerDei
2	innerDei

.1.3.6.1.4.1.2011.5.14.3.8.1.22

hwIpTrafficE2EPriority

Indicates the e2e priority of the IP traffic profile.
The higher 16 bits indicate the outer priority mapping policy and the lower 16 bits indicate the e2e priority.
The e2e priority storage mode of the IP traffic prof…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.8.1.23

hwIpTrafficE2EPriorityMappingIndex

When the e2e VLAN priority mapping policy is mapping from the outer CoS domain on the ingress,
the index (range: 1-16) of the service port priority mapping profile is used.
The referenced service port priority mapping…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.8.1.24

hwIpTrafficRateProfileName

Indicates the name of the rate profile.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.14.3.8.1.25

hwIpTrafficQueuePolicyProfileIndex

Indicates the index of the queue policy profile.
Range: 1-4

Integer32r/w

Constraints:
range: -1--1
range: 1-4

.1.3.6.1.4.1.2011.5.14.3.8.1.26

hwIpTrafficPriorityGroupProfileName

Indicates the name of the priority group profile.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.14.3.8.1.27

hwIpTrafficWrrWeightYellow

Indicates the WRR weight for yellow color packet.
Range: 0, 1-12
Default: 0
0 indicates WRR weight is auto calculated by PIR and CIR.

Integer32r/w

Constraints:
range: 0-12

.1.3.6.1.4.1.2011.5.14.3.8.1.28

hwIpTrafficWrrWeightGreen

Indicates the WRR weight for green color packet.
Range: 0, 1-12
Default: 0
0 indicates WRR weight is auto calculated by PIR and CIR.

Integer32r/w

Constraints:
range: 0-12

.1.3.6.1.4.1.2011.5.14.3.8.1.29

hwBoardTrafficModeTable

table

.1.3.6.1.4.1.2011.5.14.3.9 · 1 row entry · 1 columns

Open in standard view

Indicates the CAR mode. It is used to modify and query the board CAR mode and does not support the
create or delete operation. Before the CAR mode of a board is modified, the board cannot have any
service port or port CAR configuration. When the CAR mode of a board is modified, hwFrameIndex and
hwSlotIndex must be specified and leaf hwBoardTrafficModeType must be issued.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwBoardTrafficModeEntry entry .1.3.6.1.4.1.2011.5.14.3.9.1

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column Syntax OID

hwBoardTrafficModeType

Indicates the board CAR mode. It can be flow CAR or port+CoS CAR.
If the board supports the port CAR mode, this leaf is used to configure the port CAR mode
in batches for all ports.
The port CAR mode is set by hwPortC…

Enumerationr/w

Enumerated Values:

-1	invalid
1	servicePort
2	portCos

.1.3.6.1.4.1.2011.5.14.3.9.1.1

hwCosPortTrafficTable

table

.1.3.6.1.4.1.2011.5.14.3.10 · 1 row entry · 10 columns

Open in standard view

Indicates the port+CoS CAR table. It is used to add, query, modify, or delete the IP traffic
profile used by the port+CoS CAR. The indexes of this table are ifIndex, hwCosPortExtPara1,
hwCosPortOntId, hwCosPortGemIndex and hwCosPortTrafficCos. The port+CoS CAR can be set only
when the board CAR mode is portCos(2). When querying or modifying the port+CoS CAR, you must
enter both the IP traffic profiles used by the upstream traffic and downstream traffic (either
the names or indexes of the upstream and downstream IP traffic profiles can be entered).

hwCosPortTrafficEntry entry .1.3.6.1.4.1.2011.5.14.3.10.1

Indicates the port+CoS CAR table. It is used to add, query, modify, or delete the IP traffic
profile used by the port+CoS CAR. The indexes of this entry are ifIndex, hwCosPortExtPara1,
hwCosPortOntId, hwCosPortGemInde…

Indexes

IF-MIBifIndex hwCosPortExtPara1 hwCosPortOntId hwCosPortGemIndex hwCosPortTrafficCos

Column Syntax OID

hwCosPortTrafficCos

It is one of table indexes. Its meaning varies with the value range. When the value range is 0-7, it indicates the priority for
the specified CoS field of packets.When the value range is 8-15, it indicates the index fo…

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.2011.5.14.3.10.1.1

hwCosPortInboundTrafficIndex

Indicates the index of the IP traffic profile used by upstream packets.
Range: 1-1024
The IP traffic profile indicated by this index must exist in hwIpTrafficParamTable.

Integer32r/w

Constraints:
range: 1-1024

.1.3.6.1.4.1.2011.5.14.3.10.1.2

hwCosPortOutboundTrafficIndex

Indicates the index of the IP traffic profile used by downstream packets.
Range: 1-1024
The IP traffic profile indicated by this index must exist in hwIpTrafficParamTable.

Integer32r/w

Constraints:
range: 1-1024

.1.3.6.1.4.1.2011.5.14.3.10.1.3

hwCosPortTrafficRowStatus

Indicates the row status.
In creation, you must set this leaf to createAndGo(4) and must enter both the IP traffic profiles used by the upstream traffic
and downstream traffic (either the names or indexes of the upstr…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.10.1.4

hwCosPortExtPara1

It is one of table indexes. It is a difference parameter between access modes, indicating the GEM port ID.
This leaf is valid when the GPON board works in the distributing mode and invalid in other cases. Value
-1 ind…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.10.1.5

hwCosPortInboundTrafficName

Indicates the name of the IP address used by upstream packets.
The IP traffic profile indicated by this name must exist in hwIpTrafficParamTable.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.14.3.10.1.6

hwCosPortOutboundTrafficName

Indicates the name of the IP address used by downstream packets.
The IP traffic profile indicated by this name must exist in hwIpTrafficParamTable.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.14.3.10.1.7

hwCosPortOntId

It is one of table indexes. It is a difference parameter between access modes, indicating the ONT ID.
Range: -1, 0-255
This leaf is valid when the GPON works in the profile mode or when the board is an EPON board. In o…

Integer32

Constraints:
range: -1-255

.1.3.6.1.4.1.2011.5.14.3.10.1.8

hwCosPortGemIndex

It is one of table indexes. It is a difference parameter between access modes, indicating the GEM index.
Range: -1, 0-1023
This leaf is valid when the GPON board works in the profile mode and invalid in other cases. V…

Integer32

Constraints:
range: -1-1023

.1.3.6.1.4.1.2011.5.14.3.10.1.9

hwCosPortCosGroupTableIndex

It indicates the index of the CoS-group table bound to the GEM port.
Range: -1 | 1-16
The value -1 indicates that this leaf is invalid.

Integer32

Constraints:
range: -1--1
range: 1-16

.1.3.6.1.4.1.2011.5.14.3.10.1.10

hwQueueGroupShapingTable

table

.1.3.6.1.4.1.2011.5.14.3.15 · 1 row entry · 5 columns

Open in standard view

Indicates a traffic shaping table, which is used to perform traffic shaping on certain queues on a port.

The system currently supports traffic shaping on only queues 3 and 4 and at the same time PQ scheduling
is applied invariably between them.

The indexes of this table are ifIndex and hwQueueGroup.
ifIndex indicates the index of F/S/P on which traffic shaping is performed.
hwQueueGroup indicates a queue group on which traffic shaping is performed.

This parameter has 32 bits and each bit represents a queue.
To perform traffic shaping on a queue group, you just need to adjust bits to 1.
The system currently supports up to eight queues. Traffic shaping, however, is performed only on queues 3 and 4.
Hence, the index is variably 00000000 00000000 00000000 00011000 (in binary), that is, 0x18 (in hexadecimal notation).

hwQueueGroupShapingEntry entry .1.3.6.1.4.1.2011.5.14.3.15.1

Indicates a traffic shaping table, which is used to perform traffic shaping on certain queues on a port.

The system currently supports traffic shaping on only queues 3 and 4 and at the same time PQ schedul…

Indexes

IF-MIBifIndex hwQueueGroup

Column Syntax OID

hwQueueGroup

Indicates a queue group on which traffic shaping is performed.
This parameter has 32 bits and each bit represents a queue.
To perform traffic shaping on a queue group, you just need to adjust bits to 1.
…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.15.1.1

hwQueueGroupSchedMode

Indicates the queue scheduling mode.
The system currently supports only PQ scheduling (enumerated value: strictPriority(1)).
In the case of PQ scheduling, PQ takes out all packets from a queue with a high priority and…

Enumerationr/w

Enumerated Values:

1	strictPriority
2	wrr

.1.3.6.1.4.1.2011.5.14.3.15.1.2

hwQueueGroupShapingInboundTrafficIndex

Indicates the index of the IP traffic profile referenced by inbound packets.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.15.1.3

hwQueueGroupShapingOutboundTrafficIndex

Indicates the index of the IP traffic profile referenced by outbound packets.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.15.1.4

hwQueueGroupShapingTrafficRowStatus

Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create traffic shaping, set this leaf to createAndGo(4) (currently, only ADP, ADQ, and VDT series boards support traffic shaping).
To…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.15.1.5

hwPortVlanPolicingTable

table

.1.3.6.1.4.1.2011.5.14.3.17 · 1 row entry · 6 columns

Open in standard view

Indicates the port+VLAN CAR table. It is used to add, query, modify, or delete the IP traffic profile used by the port+VLAN CAR.
The indexes of this table are ifIndex and hwPortVlanPolicingVlanID. When querying or modifying the port+VLAN CAR, you must enter
both the upstream and downstream IP traffic profiles (either the names or indexes of the upstream and downstream IP traffic profiles
can be entered).

hwPortVlanPolicingEntry entry .1.3.6.1.4.1.2011.5.14.3.17.1

Indicates the port+VLAN CAR table. It is used to add, query, modify, or delete the IP traffic profile used by the port+VLAN CAR.
The indexes of this entry are ifIndex and hwPortVlanPolicingVlanID. When querying or modi…

Indexes

IF-MIBifIndex hwPortVlanPolicingVlanID

Column Syntax OID

hwPortVlanPolicingVlanID

It is one of the table indexes, indicating the VLAN of the CAR group.
The value 0 indicates that VLAN does not need to be specified when configuring a CAR-port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.17.1.1

hwPortVlanPolicingInboundTrafficIndex

Indicates the index of the IP traffic profile used by upstream packets.
Range: 1-1024
The IP traffic profile indicated by this index must exist in hwIpTrafficParamTable.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.17.1.2

hwPortVlanPolicingOutboundTrafficIndex

Indicates the index of the IP traffic profile used by downstream packets.
Range: 1-1024
The IP traffic profile indicated by this index must exist in hwIpTrafficParamTable.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.17.1.3

hwPortVlanPolicingInboundTrafficName

Indicates the name of the IP address used by upstream packets.
The IP traffic profile indicated by this name must exist in hwIpTrafficParamTable.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.14.3.17.1.4

hwPortVlanPolicingOutboundTrafficName

Indicates the name of the IP address used by downstream packets.
The IP traffic profile indicated by this name must exist in hwIpTrafficParamTable.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.14.3.17.1.5

hwPortVlanPolicingTrafficRowStatus

Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
In creation, you must set this leaf to createAndGo(4) and must enter both the
IP traffic profiles used by the upstream traffic and downs…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.17.1.6

hwPbitsToPbitsMappingTable

table

.1.3.6.1.4.1.2011.5.14.3.18 · 1 row entry · 10 columns

Open in standard view

Indicates the service port priority mapping profile.
It is used to modify and query the service port mapping relationships.
The index of this table is hwPbitsToPbitsMappingIndex.
Currently, the system supports only four service port priority mapping tables.
The first priority mapping table has fixed mappings 0-0, 1-1,...7-7, that is,
the priority is copied. The other three priority mapping tables can be customized
by users; for example, mappings 0-0, 1-1, 2-2, 3-3, 4-3, 5-3, 6-3, and 7-3 can be
configured.
A service port priority mapping table can be queried or modified, but cannot be
created or deleted. The service port priority mapping table with index 1 cannot be
modified.

hwPbitsToPbitsMappingEntry entry .1.3.6.1.4.1.2011.5.14.3.18.1

Indicates the service port priority mapping profile.
It is used to modify and query the service port mapping relationships.
The index of this entry is hwPbitsToPbitsMappingIndex.
Currently, the system supports only fou…

Indexes

hwPbitsToPbitsMappingIndex

Column Syntax OID

hwPbitsToPbitsMappingIndex

Indicates the index of the service port priority mapping table.
Range: 1-16
Currently, the system supports four service port priority mapping tables.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.2011.5.14.3.18.1.1

hwPbitsToPbitsMapping0

Indicates the output 802.1p priority of the mapping with priority 0.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 | …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.18.1.2

hwPbitsToPbitsMapping1

Indicates the output 802.1p priority of the mapping with priority 1.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 | …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.18.1.3

hwPbitsToPbitsMapping2

Indicates the output 802.1p priority of the mapping with priority 2.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 | …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.18.1.4

hwPbitsToPbitsMapping3

Indicates the output 802.1p priority of the mapping with priority 3.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 | …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.18.1.5

hwPbitsToPbitsMapping4

Indicates the output 802.1p priority of the mapping with priority 4.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 | …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.18.1.6

hwPbitsToPbitsMapping5

Indicates the output 802.1p priority of the mapping with priority 5.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 | …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.18.1.7

hwPbitsToPbitsMapping6

Indicates the output 802.1p priority of the mapping with priority 6.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 | …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.18.1.8

hwPbitsToPbitsMapping7

Indicates the output 802.1p priority of the mapping with priority 7.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 | …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.18.1.9

hwPbitsToPbitsMappingRowStatus

Indicates the row status.
It supports only the query function. active(1) is displayed in the query result.
Options:
1. active(1) -indicates the query operation

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.18.1.10

hwBoardvlanrangestateTable

table

.1.3.6.1.4.1.2011.5.14.3.20 · 1 row entry · 1 columns

Open in standard view

Indicates VLAN RANGE flow feature.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwBoardvlanrangestateEntry entry .1.3.6.1.4.1.2011.5.14.3.20.1

Indicates VLAN RANGE flow feature.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column Syntax OID

hwBoardvlanrangestate

VLAN Range state.This object can be set to 'disable' or 'enable'
Options:
1. disable(1) -enable VLAN Range state.
2. enable(2) -disable VLAN Range state.

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.2011.5.14.3.20.1.1

hwQueueStatisticsstateTable

table

.1.3.6.1.4.1.2011.5.14.3.22 · 1 row entry · 13 columns

Open in standard view

Learns about the packet pass-through or drop status of a specified queue on a downstream port.
After a packet is sent downstream, the statistics of pass-through packets are increased by 1 if the packet passes.
Otherwise, the statistics of dropped packets are increased by 1.
Also learns about the byte pass-through status of a specified queue on a downstream port.
After a byte is sent downstream, the statistics of pass-through bytes are increased by 1 if the byte passes.
The indexes of this table are hwQueueifIndex and hwQueueId.

hwQueueStatisticsstateEntry entry .1.3.6.1.4.1.2011.5.14.3.22.1

Indexes

hwQueueifIndex hwQueueId

Column	Syntax	OID
hwQueueifIndex Indicates the index of F/S/P on which packets are queried or deleted. Its value must be a unique value greater than 0. Its algorithm and value are the same as ifindex which is defined in IF-MIB (RFC 2233).	Unsigned32 Constraints: `range: 0-4294967295`	`.1.3.6.1.4.1.2011.5.14.3.22.1.1`
hwQueueId Indicates a specified queue ID. Range: 0-7 The queues are real queues (errors are prompted when there are actually four queues on a board).	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.2011.5.14.3.22.1.2`
hwQueueStatisticsPassedNumber Indicates the number of pass-through packets. After a packet is sent downstream, the statistics of pass-through packets are increased by 1 if the packet passes. '18446744073709551615' means invalid value.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.3.22.1.3`
hwQueueStatisticsDroppedNumber Indicates the number of dropped packets. After a packet is sent downstream, the statistics of dropped packets are increased by 1 if the packet fails to pass. '18446744073709551615' means invalid value.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.3.22.1.4`
hwQueueStatisticsReset Indicates whether to delete packets statistics. If hwQueueStatisticsReset is 1, it indicates that packets statistics of a specified queue will be deleted and counting will restart.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.3.22.1.5`
hwQueueStatisticsPassedBytes Indicates the number of pass-through bytes. After a byte is sent downstream, the statistics of pass-through bytes are increased by 1 if the byte passes. '18446744073709551615' means invalid value.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.3.22.1.6`
hwQueueStatisticsDroppedUnRecognizedColorNumber Indicates the number of unRecognized dropped packets. After a packet is sent downstream, the statistics of dropped packets are increased by 1 if the packet fails to pass. '18446744073709551615' means invalid value.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.3.22.1.7`
hwQueueStatisticsDroppedGreenNumber Indicates the number of green dropped packets. After a packet is sent downstream, the statistics of dropped packets are increased by 1 if the packet fails to pass. '18446744073709551615' means invalid value.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.3.22.1.8`
hwQueueStatisticsDroppedYellowNumber Indicates the number of yellow dropped packets. After a packet is sent downstream, the statistics of dropped packets are increased by 1 if the packet fails to pass. '18446744073709551615' means invalid value.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.3.22.1.9`
hwQueueStatisticsPassedGreenBytes Indicates the number of pass-through bytes of green packets. After a byte is sent downstream, the statistics of pass-through bytes are increased by 1 if the byte passes. '18446744073709551615' means invalid value.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.3.22.1.10`
hwQueueStatisticsPassedGreenNumber Indicates the number of green pass-through packets. After a packet is sent downstream, the statistics of pass-through packets are increased by 1 if the packet passes. '18446744073709551615' means invalid value.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.3.22.1.11`
hwQueueStatisticsPassedYellowBytes Indicates the number of pass-through bytes of yellow packets. After a byte is sent downstream, the statistics of pass-through bytes are increased by 1 if the byte passes. '18446744073709551615' means invalid value.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.3.22.1.12`
hwQueueStatisticsPassedYellowNumber Indicates the number of yellow pass-through packets. After a packet is sent downstream, the statistics of pass-through packets are increased by 1 if the packet passes. '18446744073709551615' means invalid value.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.3.22.1.13`

hwCarGroupTable

table

.1.3.6.1.4.1.2011.5.14.3.23 · 1 row entry · 6 columns

Open in standard view

Indicates the service port CAR group table. It is used to add, modify, query, or delete a service port CAR group.
The index of this table is hwCarGroupIndex. When adding a service port CAR group, if you set hwCarGroupIndex to -1,
the system will allocate an idle index. When adding a service port CAR group, you must enter both the upstream and
downstream IP traffic profiles (either the names or indexes of the upstream and downstream IP traffic profiles can
be entered).

hwCarGroupEntry entry .1.3.6.1.4.1.2011.5.14.3.23.1

Indicates the service port CAR group table. It is used to add, modify, query, or delete a service port CAR group.
The index of this entry is hwCarGroupIndex. When adding a service port CAR group, if you set hwCarGroupI…

Indexes

hwCarGroupIndex

Column Syntax OID

hwCarGroupIndex

Table index, indicating the index of the service port CAR group.
Range: 1-32768.
When adding a service port CAR group, if you set hwCarGroupIndex to -1,
the system will allocate an idle index.

Integer32

Constraints:
range: -1--1
range: 1-32768

.1.3.6.1.4.1.2011.5.14.3.23.1.1

hwCarGroupInboundTrafficIndex

Indicates the index of the IP traffic profile used by upstream packets.
Range: 1-1024
The IP traffic profile indicated by this index must exist in hwIpTrafficParamTable.

Integer32r/w

Constraints:
range: 1-1024

.1.3.6.1.4.1.2011.5.14.3.23.1.2

hwCarGroupOutboundTrafficIndex

Indicates the index of the IP traffic profile used by downstream packets.
Range: 1-1024
The IP traffic profile indicated by this index must exist in hwIpTrafficParamTable.

Integer32r/w

Constraints:
range: 1-1024

.1.3.6.1.4.1.2011.5.14.3.23.1.3

hwCarGroupInboundTrafficName

Indicates the name of the IP address used by upstream packets.
The IP traffic profile indicated by this name must exist in hwIpTrafficParamTable.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.14.3.23.1.4

hwCarGroupOutboundTrafficName

Indicates the name of the IP address used by downstream packets.
The IP traffic profile indicated by this name must exist in hwIpTrafficParamTable.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.14.3.23.1.5

hwCarGroupRowStatus

Indicates the row status.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates creating a CAR group
3. destroy(6) -indicates deleting a CAR group
In creation, you must set this lea…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.23.1.6

hwCarGroupSrvFlowTable

table

.1.3.6.1.4.1.2011.5.14.3.24 · 1 row entry · 4 columns

Open in standard view

Indicates the member table of a service port CAR group. It is used to add, query, or delete a member from 
a service port group. The indexes of this table are hwCarGroupMemberIndex and hwCarGroupSrvFlowIndex.

hwCarGroupSrvFlowEntry entry .1.3.6.1.4.1.2011.5.14.3.24.1

Indicates the member table of a service port CAR group. It is used to add, query, or delete a member from
a service port group. The indexes of this entry are hwCarGroupMemberIndex and hwCarGroupSrvFlowIndex.

Indexes

hwCarGroupMemberIndex hwCarGroupSrvFlowIndex

Column Syntax OID

hwCarGroupMemberIndex

Indicates the index of the service port CAR group.
Range: 1-32768
The service port CAR group indicated by this index must exist in hwCarGroupTable.

Integer32

Constraints:
range: 1-32768

.1.3.6.1.4.1.2011.5.14.3.24.1.1

hwCarGroupSrvFlowIndex

Indicates the index of the service port CAR group.
The service port CAR group indicated by this index must exist in hwExtSrvFlowTable.
In the xPON access mode, the service ports to be added to the same CAR group must …

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.24.1.2

hwCarGroupSrvFlowOperType

Indicates the operation type.
Options:
1. add(1) -Add a service port to a CAR group.
2. del(2) -Delete a service port to a CAR group.
To add a service port to a CAR group,
you must set this leaf to add(…

Enumerationr/w

Enumerated Values:

1	add
2	del

.1.3.6.1.4.1.2011.5.14.3.24.1.3

hwCarGroupSrvFlowEndPointType

Indicates the end-point type of a connection-oriented service flow.
Options:
1. destination(1) -indicates the destination end-point of a connection-oriented service port.
2. source(2) -indicates the source end-…

Enumerationr/w

Enumerated Values:

-1	invalid
1	destination
2	source

.1.3.6.1.4.1.2011.5.14.3.24.1.4

hwDscpToPbitsMappingTable

table

.1.3.6.1.4.1.2011.5.14.3.26 · 1 row entry · 10 columns

Open in standard view

Indicates the DSCP-to-802.1p priority mapping profile.
It is used to modify and query the DSCP-to-802.1p priority mapping relationships in the system.
The index of this table is hwDscpToPbitsMappingIndex.
By default, the system supports four DSCP-to-802.1p priority mapping profiles. These priority
mapping tables can be queried or modified, but cannot be created or deleted. The DSCP-to-802.1p
priority mapping table with index 1 cannot be modified.

hwDscpToPbitsMappingEntry entry .1.3.6.1.4.1.2011.5.14.3.26.1

Indicates the DSCP-to-802.1p priority mapping profile.
It is used to modify and query the DSCP-to-802.1p priority mapping relationships in the system.
The index of this entry is hwDscpToPbitsMappingIndex.
By default, t…

Indexes

hwDscpToPbitsMappingIndex

Column Syntax OID

hwDscpToPbitsMappingIndex

Indicates the index of the DSCP-to-802.1p priority mapping table.
Range: 1-50
By default, the system supports four DSCP-to-802.1p priority mapping tables.

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.2011.5.14.3.26.1.1

hwDscpListMapToPriority0

Indicates the mask of the DSCP that is mapped to 802.1p priority 0. If a bit of the mask is set to 1,
it indicates that the corresponding DSCP value is mapped to the 802.1p priority. The mask has 64 bits
in total, cor…

Bitsr/w

Enumerated Values:

0	dscp0
1	dscp1
2	dscp2
3	dscp3
4	dscp4
5	dscp5
6	dscp6
7	dscp7
8	dscp8
9	dscp9
10	dscp10
11	dscp11
12	dscp12
13	dscp13
14	dscp14
15	dscp15
16	dscp16
17	dscp17
18	dscp18
19	dscp19
20	dscp20
21	dscp21
22	dscp22
23	dscp23
24	dscp24
25	dscp25
26	dscp26
27	dscp27
28	dscp28
29	dscp29
30	dscp30
31	dscp31
32	dscp32
33	dscp33
34	dscp34
35	dscp35
36	dscp36
37	dscp37
38	dscp38
39	dscp39
40	dscp40
41	dscp41
42	dscp42
43	dscp43
44	dscp44
45	dscp45
46	dscp46
47	dscp47
48	dscp48
49	dscp49
50	dscp50
51	dscp51
52	dscp52
53	dscp53
54	dscp54
55	dscp55
56	dscp56
57	dscp57
58	dscp58
59	dscp59
60	dscp60
61	dscp61
62	dscp62
63	dscp63

.1.3.6.1.4.1.2011.5.14.3.26.1.2

hwDscpListMapToPriority1

Indicates the mask of the DSCP is mapped to 802.1p priority 1. If a bit of the mask
is set to 1, it indicates that the corresponding DSCP value is mapped to the 802.1p
priority. The mask has 64 bits in total, correspo…

Bitsr/w

Enumerated Values:

0	dscp0
1	dscp1
2	dscp2
3	dscp3
4	dscp4
5	dscp5
6	dscp6
7	dscp7
8	dscp8
9	dscp9
10	dscp10
11	dscp11
12	dscp12
13	dscp13
14	dscp14
15	dscp15
16	dscp16
17	dscp17
18	dscp18
19	dscp19
20	dscp20
21	dscp21
22	dscp22
23	dscp23
24	dscp24
25	dscp25
26	dscp26
27	dscp27
28	dscp28
29	dscp29
30	dscp30
31	dscp31
32	dscp32
33	dscp33
34	dscp34
35	dscp35
36	dscp36
37	dscp37
38	dscp38
39	dscp39
40	dscp40
41	dscp41
42	dscp42
43	dscp43
44	dscp44
45	dscp45
46	dscp46
47	dscp47
48	dscp48
49	dscp49
50	dscp50
51	dscp51
52	dscp52
53	dscp53
54	dscp54
55	dscp55
56	dscp56
57	dscp57
58	dscp58
59	dscp59
60	dscp60
61	dscp61
62	dscp62
63	dscp63

.1.3.6.1.4.1.2011.5.14.3.26.1.3

hwDscpListMapToPriority2

Indicates the mask of the DSCP is mapped to 802.1p priority 2. If a bit of the
mask is set to 1, it indicates that the corresponding DSCP value is mapped to
the 802.1p priority. The mask has 64 bits in total, correspo…

Bitsr/w

Enumerated Values:

0	dscp0
1	dscp1
2	dscp2
3	dscp3
4	dscp4
5	dscp5
6	dscp6
7	dscp7
8	dscp8
9	dscp9
10	dscp10
11	dscp11
12	dscp12
13	dscp13
14	dscp14
15	dscp15
16	dscp16
17	dscp17
18	dscp18
19	dscp19
20	dscp20
21	dscp21
22	dscp22
23	dscp23
24	dscp24
25	dscp25
26	dscp26
27	dscp27
28	dscp28
29	dscp29
30	dscp30
31	dscp31
32	dscp32
33	dscp33
34	dscp34
35	dscp35
36	dscp36
37	dscp37
38	dscp38
39	dscp39
40	dscp40
41	dscp41
42	dscp42
43	dscp43
44	dscp44
45	dscp45
46	dscp46
47	dscp47
48	dscp48
49	dscp49
50	dscp50
51	dscp51
52	dscp52
53	dscp53
54	dscp54
55	dscp55
56	dscp56
57	dscp57
58	dscp58
59	dscp59
60	dscp60
61	dscp61
62	dscp62
63	dscp63

.1.3.6.1.4.1.2011.5.14.3.26.1.4

hwDscpListMapToPriority3

Indicates the mask of the DSCP is mapped to 802.1p priority 3. If a bit of the mask is set
to 1, it indicates that the corresponding DSCP value is mapped to the 802.1p priority.
The mask has 64 bits in total, correspo…

Bitsr/w

Enumerated Values:

0	dscp0
1	dscp1
2	dscp2
3	dscp3
4	dscp4
5	dscp5
6	dscp6
7	dscp7
8	dscp8
9	dscp9
10	dscp10
11	dscp11
12	dscp12
13	dscp13
14	dscp14
15	dscp15
16	dscp16
17	dscp17
18	dscp18
19	dscp19
20	dscp20
21	dscp21
22	dscp22
23	dscp23
24	dscp24
25	dscp25
26	dscp26
27	dscp27
28	dscp28
29	dscp29
30	dscp30
31	dscp31
32	dscp32
33	dscp33
34	dscp34
35	dscp35
36	dscp36
37	dscp37
38	dscp38
39	dscp39
40	dscp40
41	dscp41
42	dscp42
43	dscp43
44	dscp44
45	dscp45
46	dscp46
47	dscp47
48	dscp48
49	dscp49
50	dscp50
51	dscp51
52	dscp52
53	dscp53
54	dscp54
55	dscp55
56	dscp56
57	dscp57
58	dscp58
59	dscp59
60	dscp60
61	dscp61
62	dscp62
63	dscp63

.1.3.6.1.4.1.2011.5.14.3.26.1.5

hwDscpListMapToPriority4

Indicates the mask of the DSCP is mapped to 802.1p priority 4. If a bit of the mask
is set to 1, it indicates that the corresponding DSCP value is mapped to the 802.1p
priority. The mask has 64 bits in total, correspo…

Bitsr/w

Enumerated Values:

0	dscp0
1	dscp1
2	dscp2
3	dscp3
4	dscp4
5	dscp5
6	dscp6
7	dscp7
8	dscp8
9	dscp9
10	dscp10
11	dscp11
12	dscp12
13	dscp13
14	dscp14
15	dscp15
16	dscp16
17	dscp17
18	dscp18
19	dscp19
20	dscp20
21	dscp21
22	dscp22
23	dscp23
24	dscp24
25	dscp25
26	dscp26
27	dscp27
28	dscp28
29	dscp29
30	dscp30
31	dscp31
32	dscp32
33	dscp33
34	dscp34
35	dscp35
36	dscp36
37	dscp37
38	dscp38
39	dscp39
40	dscp40
41	dscp41
42	dscp42
43	dscp43
44	dscp44
45	dscp45
46	dscp46
47	dscp47
48	dscp48
49	dscp49
50	dscp50
51	dscp51
52	dscp52
53	dscp53
54	dscp54
55	dscp55
56	dscp56
57	dscp57
58	dscp58
59	dscp59
60	dscp60
61	dscp61
62	dscp62
63	dscp63

.1.3.6.1.4.1.2011.5.14.3.26.1.6

hwDscpListMapToPriority5

Indicates the mask of the DSCP is mapped to 802.1p priority 5. If a bit of the mask
is set to 1, it indicates that the corresponding DSCP value is mapped to the 802.1p
priority. The mask has 64 bits in total, correspo…

Bitsr/w

Enumerated Values:

0	dscp0
1	dscp1
2	dscp2
3	dscp3
4	dscp4
5	dscp5
6	dscp6
7	dscp7
8	dscp8
9	dscp9
10	dscp10
11	dscp11
12	dscp12
13	dscp13
14	dscp14
15	dscp15
16	dscp16
17	dscp17
18	dscp18
19	dscp19
20	dscp20
21	dscp21
22	dscp22
23	dscp23
24	dscp24
25	dscp25
26	dscp26
27	dscp27
28	dscp28
29	dscp29
30	dscp30
31	dscp31
32	dscp32
33	dscp33
34	dscp34
35	dscp35
36	dscp36
37	dscp37
38	dscp38
39	dscp39
40	dscp40
41	dscp41
42	dscp42
43	dscp43
44	dscp44
45	dscp45
46	dscp46
47	dscp47
48	dscp48
49	dscp49
50	dscp50
51	dscp51
52	dscp52
53	dscp53
54	dscp54
55	dscp55
56	dscp56
57	dscp57
58	dscp58
59	dscp59
60	dscp60
61	dscp61
62	dscp62
63	dscp63

.1.3.6.1.4.1.2011.5.14.3.26.1.7

hwDscpListMapToPriority6

Indicates the mask of the DSCP is mapped to 802.1p priority 6. If a bit of the mask is
set to 1, it indicates that the corresponding DSCP value is mapped to the 802.1p priority.
The mask has 64 bits in total, correspo…

Bitsr/w

Enumerated Values:

0	dscp0
1	dscp1
2	dscp2
3	dscp3
4	dscp4
5	dscp5
6	dscp6
7	dscp7
8	dscp8
9	dscp9
10	dscp10
11	dscp11
12	dscp12
13	dscp13
14	dscp14
15	dscp15
16	dscp16
17	dscp17
18	dscp18
19	dscp19
20	dscp20
21	dscp21
22	dscp22
23	dscp23
24	dscp24
25	dscp25
26	dscp26
27	dscp27
28	dscp28
29	dscp29
30	dscp30
31	dscp31
32	dscp32
33	dscp33
34	dscp34
35	dscp35
36	dscp36
37	dscp37
38	dscp38
39	dscp39
40	dscp40
41	dscp41
42	dscp42
43	dscp43
44	dscp44
45	dscp45
46	dscp46
47	dscp47
48	dscp48
49	dscp49
50	dscp50
51	dscp51
52	dscp52
53	dscp53
54	dscp54
55	dscp55
56	dscp56
57	dscp57
58	dscp58
59	dscp59
60	dscp60
61	dscp61
62	dscp62
63	dscp63

.1.3.6.1.4.1.2011.5.14.3.26.1.8

hwDscpListMapToPriority7

Indicates the mask of the DSCP is mapped to 802.1p priority 7. If a bit of the mask is
set to 1, it indicates that the corresponding DSCP value is mapped to the 802.1p priority.
The mask has 64 bits in total, correspo…

Bitsr/w

Enumerated Values:

0	dscp0
1	dscp1
2	dscp2
3	dscp3
4	dscp4
5	dscp5
6	dscp6
7	dscp7
8	dscp8
9	dscp9
10	dscp10
11	dscp11
12	dscp12
13	dscp13
14	dscp14
15	dscp15
16	dscp16
17	dscp17
18	dscp18
19	dscp19
20	dscp20
21	dscp21
22	dscp22
23	dscp23
24	dscp24
25	dscp25
26	dscp26
27	dscp27
28	dscp28
29	dscp29
30	dscp30
31	dscp31
32	dscp32
33	dscp33
34	dscp34
35	dscp35
36	dscp36
37	dscp37
38	dscp38
39	dscp39
40	dscp40
41	dscp41
42	dscp42
43	dscp43
44	dscp44
45	dscp45
46	dscp46
47	dscp47
48	dscp48
49	dscp49
50	dscp50
51	dscp51
52	dscp52
53	dscp53
54	dscp54
55	dscp55
56	dscp56
57	dscp57
58	dscp58
59	dscp59
60	dscp60
61	dscp61
62	dscp62
63	dscp63

.1.3.6.1.4.1.2011.5.14.3.26.1.9

hwDscpToPbitsMappingRowStatus

Indicates the row status.
It supports only the query function. active(1) is displayed in the query result.
Option:
1. active(1) -indicates the query operation

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.26.1.10

hwWREDTable

table

.1.3.6.1.4.1.2011.5.14.3.27 · 1 row entry · 8 columns

Open in standard view

Configures or queries a WRED profile.
The index of this table is hwWREDIndex.
During the creation of a WRED profile, if hwWREDIndex is specified to -1, 
it indicates that the index of the WRED profile is assigned by the system.

hwWREDEntry entry .1.3.6.1.4.1.2011.5.14.3.27.1

Configures or queries a WRED profile.
The index of this entry is hwWREDIndex.
During the creation of a WRED profile, if hwWREDIndex is specified to -1,
it indicates that the index of the WRED profile is assigned by the…

Indexes

hwWREDIndex

Column Syntax OID

hwWREDIndex

Indicates the index of a WRED profile that is operated. It uniquely identifies the WRED profile.
You can fill in -1 as the value of hwWREDIndex and issue the setting.
Then, the system automatically allocates an idle in…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.27.1.1

hwWREDGreenLowLimit

Indicates the early drop low limit threshold of green packets.
Range: -1, 0-100.
-1 is the invalid value.
hwWREDGreenLowLimit, hwWREDGreenHighLimit, and hwWREDGreenProbability must be specified at the same time.

Integer32r/w

Constraints:
range: -1-100

.1.3.6.1.4.1.2011.5.14.3.27.1.2

hwWREDGreenHighLimit

Indicates the early drop high limit threshold of green packets.
Range: -1, 0-100.
-1 is the invalid value.
hwWREDGreenLowLimit, hwWREDGreenHighLimit, and hwWREDGreenProbability must be specified at the same time.

Integer32r/w

Constraints:
range: -1-100

.1.3.6.1.4.1.2011.5.14.3.27.1.3

hwWREDGreenProbability

Indicates the early drop probability of green packets.
Range: -1, 0-100.
-1 is the invalid value.
hwWREDGreenLowLimit, hwWREDGreenHighLimit, and hwWREDGreenProbability must be specified at the same time.

Integer32r/w

Constraints:
range: -1-100

.1.3.6.1.4.1.2011.5.14.3.27.1.4

hwWREDYellowLowLimit

Indicates the early drop low limit threshold of yellow packets.
Range: -1, 0-100.
-1 is the invalid value.
hwWREDYellowLowLimit, hwWREDYellowHighLimit, and hwWREDYellowProbability must be specified at the same time.

Integer32r/w

Constraints:
range: -1-100

.1.3.6.1.4.1.2011.5.14.3.27.1.5

hwWREDYellowHighLimit

Indicates the early drop high limit threshold of yellow packets.
Range: -1, 0-100.
-1 is the invalid value.
hwWREDYellowLowLimit, hwWREDYellowHighLimit, and hwWREDYellowProbability must be specified at the same time.

Integer32r/w

Constraints:
range: -1-100

.1.3.6.1.4.1.2011.5.14.3.27.1.6

hwWREDYellowProbability

Indicates the early drop probability of yellow packets.
Range: -1, 0-100.
-1 is the invalid value.
hwWREDYellowLowLimit, hwWREDYellowHighLimit, and hwWREDYellowProbability must be specified at the same time.

Integer32r/w

Constraints:
range: -1-100

.1.3.6.1.4.1.2011.5.14.3.27.1.7

hwWREDRowStatus

Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)

To create a WRED profile, set this leaf to createAndGo(4) and specify the three leaves of hwWREDGreenLowLimit,
h…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.27.1.8

hwQueueWREDTable

table

.1.3.6.1.4.1.2011.5.14.3.28 · 1 row entry · 2 columns

Open in standard view

Describes the binding between queues and a WRED profile.
The index of hwQueueWREDTable is hwQueueWREDId. hwQueueWREDId indicates a specified queue ID.
Range: 1-8
Before binding/unbinding queues to/from a WRED profile, 
make sure that the WRED profile be already created in hwWREDTable and hwEarlyDropMode be colorBase(2).
The index of this table is hwQueueWREDIndex.

hwQueueWREDEntry entry .1.3.6.1.4.1.2011.5.14.3.28.1

Describes the binding between queues and a WRED profile.
The index of hwQueueWREDTable is hwQueueWREDId. hwQueueWREDId indicates a specified queue ID.
Range: 1-8
Before binding/unbinding queues to/from a WRED profile,
…

Indexes

hwQueueWREDId

Column	Syntax	OID
hwQueueWREDId Indicates a specified queue ID. Range: 1-8 Each queue can be separately bound to a WRED profile but you are allowed to bind one queue to the WRED profile at a time.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.2011.5.14.3.28.1.1`
hwQueueWREDIndex Indicates the index of a WRED profile to be bound. Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete (that is, including the early drop information). At th…	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.3.28.1.2`

hwIPPrecToPbitsMappingTable

table

.1.3.6.1.4.1.2011.5.14.3.29 · 1 row entry · 10 columns

Open in standard view

Indicates the IP precedence to pbits mapping table. This table is used to configure or query the mapping
between the IP precedence and pbits. It only supports the modify operation but not the create or delete
operation. The fist record of this table is the default record of the system and cannot be modified.
The index of this table is hwIPPrecToPbitsMappingIndex.

hwIPPrecToPbitsMappingEntry entry .1.3.6.1.4.1.2011.5.14.3.29.1

Indexes

hwIPPrecToPbitsMappingIndex

Column Syntax OID

hwIPPrecToPbitsMappingIndex

Indicates the index of the priority table used to translate packet's priority.
Range: 1-4
The system supports four user-ToS priority mapping tables.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2011.5.14.3.29.1.1

hwIPPrecToPbitsMapping0

Indicates the output 802.1p priority of the mapping with IP preference 0.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.29.1.2

hwIPPrecToPbitsMapping1

Indicates the output 802.1p priority of the mapping with IP preference 1.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.29.1.3

hwIPPrecToPbitsMapping2

Indicates the output 802.1p priority of the mapping with IP preference 2.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.29.1.4

hwIPPrecToPbitsMapping3

Indicates the output 802.1p priority of the mapping with IP preference 0.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.29.1.5

hwIPPrecToPbitsMapping4

Indicates the output 802.1p priority of the mapping with IP preference 4.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.29.1.6

hwIPPrecToPbitsMapping5

Indicates the output 802.1p priority of the mapping with IP preference 5.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.29.1.7

hwIPPrecToPbitsMapping6

Indicates the output 802.1p priority of the mapping with IP preference 6.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.29.1.8

hwIPPrecToPbitsMapping7

Indicates the output 802.1p priority of the mapping with IP preference 7.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.29.1.9

hwIPPrecToPbitsMappingRowStatus

Indicates the row status.
It supports only the query function. active(1) is always returned in the query operation.
Options:
1. active(1) -indicates the query operation

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.29.1.10

hwPortCarModeTable

table

.1.3.6.1.4.1.2011.5.14.3.30 · 1 row entry · 1 columns

Open in standard view

Used to query and modify the port CAR mode.
The index of this table is ifIndex.

hwPortCarModeEntry entry .1.3.6.1.4.1.2011.5.14.3.30.1

Used to query and modify the port CAR mode.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column Syntax OID

hwPortCarMode

Indicates the port CAR mode. The port CAR mode can be by service port or by port and CoS.
Options:
1. servicePort(1) -When the port CAR mode is set to servicePort(1),
it indicates that CAR is per…

Enumerationr/w

Enumerated Values:

1	servicePort
2	portCos

.1.3.6.1.4.1.2011.5.14.3.30.1.1

hwTagTransformTable

table

.1.3.6.1.4.1.2011.5.14.3.32 · 1 row entry · 1 columns

Open in standard view

Used to enable or disable the ability of the tag-transformation.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwTagTransformEntry entry .1.3.6.1.4.1.2011.5.14.3.32.1

Used to enable or disable the ability of the tag-transformation.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column Syntax OID

hwTagTransform

Indicates the ability of the tag transformation.
Options:
1. disable(1) -Indicates that the board does not support tag transformation.
2. enable(2) -Indicates that the board supports tag transfo…

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.2011.5.14.3.32.1.1

hwBoardMacLearningControlTable

table

.1.3.6.1.4.1.2011.5.14.3.33 · 1 row entry · 1 columns

Open in standard view

Used to enable or disable the board MAC learning ability in each specified VLAN.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwBoardMacLearningControlEntry entry .1.3.6.1.4.1.2011.5.14.3.33.1

Used to enable or disable the board MAC learning ability in each specified VLAN.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column	Syntax	OID
hwMacLearningControlArray Bit 0 - 4095, each indicates the MAC learning ability in corresponding VLAN. If bit 1000 is set to 0, it indicates that the MAC learning ability in VLAN 1000 is enabled, and contrarily, if it is set to 1, that the MAC…	OctetStringr/w Constraints: `range: 512-512`	`.1.3.6.1.4.1.2011.5.14.3.33.1.1`

hwCosQueueDepthRateSlotTable

table

.1.3.6.1.4.1.2011.5.14.3.34 · 1 row entry · 9 columns

Open in standard view

Sets the depth of queue in the board.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwCosQueueDepthRateSlotEntry entry .1.3.6.1.4.1.2011.5.14.3.34.1

Sets the depth of queue in the board.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column Syntax OID

hwCosQueueDepthRateSlotQue0

Indicates the depth of queue 0, that is, percentage of the buffer exclusively occupied by queue 0.
Range: 0-100
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
…

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.34.1.1

hwCosQueueDepthRateSlotQue1

Indicates the depth of queue 1, that is, percentage of the buffer exclusively occupied by queue 1.
Range: 0-100
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
…

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.34.1.2

hwCosQueueDepthRateSlotQue2

Indicates the depth of queue 2, that is, percentage of the buffer exclusively occupied by queue 2.
Range: 0-100
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
…

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.34.1.3

hwCosQueueDepthRateSlotQue3

Indicates the depth of queue 3, that is, percentage of the buffer exclusively occupied by queue 3.
Range: 0-100
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
…

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.34.1.4

hwCosQueueDepthRateSlotQue4

Indicates the depth of queue 4, that is, percentage of the buffer exclusively occupied by queue 4.
Range: 0-100
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
…

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.34.1.5

hwCosQueueDepthRateSlotQue5

Indicates the depth of queue 5, that is, percentage of the buffer exclusively occupied by queue 5.
Range: 0-100
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
…

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.34.1.6

hwCosQueueDepthRateSlotQue6

Indicates the depth of queue 6, that is, percentage of the buffer exclusively occupied by queue 6.
Range: 0-100
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
…

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.34.1.7

hwCosQueueDepthRateSlotQue7

Indicates the depth of queue 7, that is, percentage of the buffer exclusively occupied by queue 7.
Range: 0-100
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
…

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.34.1.8

hwCosQueueDepthRateSlotRowStatus

Indicates the row status and is used for creating or deleting
a vlan connect item.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
Only options createAndGo(4) and destroy(6) are supported the set operation.
…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.34.1.255

hwEarlyDropModeSlotTable

table

.1.3.6.1.4.1.2011.5.14.3.35 · 1 row entry · 2 columns

Open in standard view

Sets the early drop mode of the board.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwEarlyDropModeSlotEntry entry .1.3.6.1.4.1.2011.5.14.3.35.1

Sets the early drop mode of the board.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column Syntax OID

hwEarlyDropModeSlot

Options:
1. priBase(1) -indicating priority-based early drop
2. colorBase(2) -indicating color-based early drop
3. off(3) -indicating disable the early drop function
4. colorWred(4) -indicating color-wred early drop
…

Enumerationr/w

Enumerated Values:

1	priBase
2	colorBase
3	off
4	colorWred

.1.3.6.1.4.1.2011.5.14.3.35.1.1

hwEarlyDropModeSlotRowStatus

Indicates the row status and is used for creating or deleting the early drop mode of the board.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
Only options createAndGo(4) and destroy(6) are supported the set o…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.35.1.255

hwCosGroupTblTable

table

.1.3.6.1.4.1.2011.5.14.3.37 · 1 row entry · 9 columns

Open in standard view

The index of this table is hwCosGroupTblIndex.
This table describes the relationship between the CoS entry in the CoS-group table and the group of the entry.
It supports the query and set operations.

hwCosGroupTblEntry entry .1.3.6.1.4.1.2011.5.14.3.37.1

The index of this entry is hwCosGroupTblIndex.
This table describes the relationship between the CoS entry in the CoS-group table and the group of the entry.
It supports the query and set operations.

Indexes

hwCosGroupTblIndex

Column	Syntax	OID
hwCosGroupTblIndex CoS-group table index Range: 1-16	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.2011.5.14.3.37.1.1`
hwCos0GroupIndex CoS group of CoS0 Range: 0-7 Default value: 0	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.2011.5.14.3.37.1.2`
hwCos1GroupIndex CoS group of CoS1 Range: 0-7 Default value: 1	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.2011.5.14.3.37.1.3`
hwCos2GroupIndex CoS group of CoS2 Range: 0-7 Default value: 2	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.2011.5.14.3.37.1.4`
hwCos3GroupIndex CoS group of CoS3 Range: 0-7 Default value: 3	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.2011.5.14.3.37.1.5`
hwCos4GroupIndex CoS group of CoS4 Range: 0-7 Default value: 4	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.2011.5.14.3.37.1.6`
hwCos5GroupIndex CoS group of CoS5 Range: 0-7 Default value: 5	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.2011.5.14.3.37.1.7`
hwCos6GroupIndex CoS group of CoS6 Range: 0-7 Default value: 6	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.2011.5.14.3.37.1.8`
hwCos7GroupIndex CoS group of CoS7 Range: 0-7 Default value: 7	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.2011.5.14.3.37.1.9`

hwCarPortCosGroupTable

table

.1.3.6.1.4.1.2011.5.14.3.38 · 1 row entry · 4 columns

Open in standard view

This table is used to set, delete, and query the CoS-group table bound to the GEM port. The traffic profile can be used to limit the rate for the CoS group only after the GEM port is bound to the CoS-group table.
The indexes of this table are ifIndex, hwCosPortGroupExtPara1, and hwCosPortGroupExtPara2. The value 0x7FFFFFFF indicates that the index is invalid.
The binding between the GEM port and the CoS-group table can be set only when the board CAR mode is portCos(2).

hwCarPortCosGroupEntry entry .1.3.6.1.4.1.2011.5.14.3.38.1

Indexes

IF-MIBifIndex hwCosPortGroupExtPara1 hwCosPortGroupExtPara2

Column Syntax OID

hwCosPortGroupExtPara1

It is one of table indexes. Its meaning varies with the GPON working mode.
When the GPON board works in the distributing mode, this leaf indicates the GEM port ID. When the GPON board works in the profile mode, this lea…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.38.1.1

hwCosPortGroupExtPara2

It is one of table indexes. Its meaning varies with the GPON working mode.
When the GPON board works in the distributing mode, this leaf is meaningless and must use an invalid value. When the GPON board works in the pro…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.38.1.2

hwCosPortGroupTableIndex

It describes the index of the CoS-group table bound to the GEM port.
Range: 1-16
This leaf must be set in the add and modify operations of the table, and is not required in the delete operation of the table.

Integer32r/w

Constraints:
range: 1-16

.1.3.6.1.4.1.2011.5.14.3.38.1.3

hwCosPortGroupRowStatus

Indicates the row status.
In creation, you must set this leaf to createAndGo(4) and must enter the cos-group-table index;
in deletion, set this leaf to destroy(6);
in query, this leaf is displayed as active(1).
Optio…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.38.1.4

hwXponQueueShapingTable

table

.1.3.6.1.4.1.2011.5.14.3.39 · 1 row entry · 6 columns

Open in standard view

Indicates XPON board queue shaping table.
It is used to add, query, modify, or delete the queue shaping on XPON board.
The indexes of this table are hwXponQueueShapingIfIndex, hwXponQueueShapingOntId, hwXponQueueId and hwXponQueueDirection.

hwXponQueueShapingEntry entry .1.3.6.1.4.1.2011.5.14.3.39.1

Indicates XPON board queue shaping table.
It is used to add, query, modify, or delete the queue shaping on XPON board.
The indexes of this entry are hwXponQueueShapingIfIndex, hwXponQueueShapingOntId, hwXponQueueId and…

Indexes

hwXponQueueShapingIfIndex hwXponQueueShapingOntId hwXponQueueId hwXponQueueDirection

Column Syntax OID

hwXponQueueShapingIfIndex

Indicates the port index for configuring a queue shaping.
The index uniquely identifies a port.
The value and algorithm of this index are the same as those of the ifIndex.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.39.1.1

hwXponQueueShapingOntId

Indicates the ONT ID for configuring a queue shaping.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.39.1.2

hwXponQueueId

Indicates the queue ID for configuring a queue shaping.
Range: 0-7

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.2011.5.14.3.39.1.3

hwXponQueueDirection

Indicates the direction for configuring a queue shaping.
Currently the XPON board only supports outBound(1).
Options:
1. outBound(1) -indicates that the index of the IP traffic profile is used by downstream packets.
…

Enumeration

Enumerated Values:

1	outBound
2	inBound

.1.3.6.1.4.1.2011.5.14.3.39.1.4

hwXponQueueShapingTrafficIndex

Indicates the index of the IP traffic profile referenced by queue shaping.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.39.1.5

hwXponQueueShapingTrafficRowStatus

Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create a queue shaping, set this leaf to createAndGo(4).
To delete a queue shaping, set this leaf to destroy(6).
When a queue shaping is…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.39.1.6

hwEthQueueShapingTable

table

.1.3.6.1.4.1.2011.5.14.3.40 · 1 row entry · 5 columns

Open in standard view

Indicates etherner board queue shaping table.
It is used to add, query, modify, or delete the queue shaping on etherner board.
The indexes of this table are hwEthQueueShapingIfIndex, hwEthQueueId and hwEthQueueDirection.

hwEthQueueShapingEntry entry .1.3.6.1.4.1.2011.5.14.3.40.1

Indicates etherner board queue shaping table.
It is used to add, query, modify, or delete the queue shaping on etherner board.
The indexes of this entry are hwEthQueueShapingIfIndex, hwEthQueueId and hwEthQueueDirectio…

Indexes

hwEthQueueShapingIfIndex hwEthQueueId hwEthQueueDirection

Column Syntax OID

hwEthQueueShapingIfIndex

Indicates the port index for configuring a queue shaping.
The index uniquely identifies a port.
The value and algorithm of this index are the same as those of the ifIndex.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.40.1.1

hwEthQueueId

Indicates the queue ID for configuring a queue shaping.
Range: 0-7

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.2011.5.14.3.40.1.2

hwEthQueueDirection

Indicates the direction for configuring a queue shaping.
Options:
1. outBound(1) -indicates that the index of the IP traffic profile is used by downstream packets.
2. inBound(2) -indicates that the index of the I…

Enumeration

Enumerated Values:

1	outBound
2	inBound

.1.3.6.1.4.1.2011.5.14.3.40.1.3

hwEthQueueShapingTrafficIndex

Indicates the index of the IP traffic profile referenced by queue shaping.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.40.1.4

hwEthQueueShapingTrafficRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.40.1.5

hwE2ECcTable

table

.1.3.6.1.4.1.2011.5.14.3.43 · 1 row entry · 17 columns

Open in standard view

Indicates end to end congestion control.
It is used to enable or disable the end to end (E2E) congestion control function on a board.
If the E2E congestion control function is enabled, the buffer of the SCUH control board can be
expanded through configuring the buffer of the SPUA board.
In this way, packets can be saved in the buffer of the SPUA board but will not be discarded
if congestion occurs on the SCUH control board.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwE2ECcEntry entry .1.3.6.1.4.1.2011.5.14.3.43.1

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column Syntax OID

hwE2ECcSwitch

It is used to enable or disable the end to end (E2E) congestion control function on a board.
Options:
1. enabled(1) -enables the E2E congestion control function on a board
2. disabled(2) -disables the E2E conges…

Enumerationr/w

Enumerated Values:

-1	notSupport
1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.14.3.43.1.1

hwE2ECcQueueBufferRaio0

Indicates the buffer size ratio of queue 0.
Range: 0-100

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.43.1.2

hwE2ECcQueueBufferRaio1

Indicates the buffer size ratio of queue 1.
Range: 0-100

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.43.1.3

hwE2ECcQueueBufferRaio2

Indicates the buffer size ratio of queue 2.
Range: 0-100

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.43.1.4

hwE2ECcQueueBufferRaio3

Indicates the buffer size ratio of queue 3.
Range: 0-100

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.43.1.5

hwE2ECcQueueBufferRaio4

Indicates the buffer size ratio of queue 4.
Range: 0-100

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.43.1.6

hwE2ECcQueueBufferRaio5

Indicates the buffer size ratio of queue 5.
Range: 0-100

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.43.1.7

hwE2ECcQueueBufferRaio6

Indicates the buffer size ratio of queue 6.
Range: 0-100

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.43.1.8

hwE2ECcQueueBufferRaio7

Indicates the buffer size ratio of queue 7.
Range: 0-100

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.43.1.9

hwE2ECcQueueBufferRaio8

Indicates the buffer size ratio of queue 8.
Range: 0-100

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.43.1.10

hwE2ECcQueueBufferRaio9

Indicates the buffer size ratio of queue 9.
Range: 0-100

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.43.1.11

hwE2ECcQueueBufferRaio10

Indicates the buffer size ratio of queue 10.
Range: 0-100

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.43.1.12

hwE2ECcQueueBufferRaio11

Indicates the buffer size ratio of queue 11.
Range: 0-100

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.43.1.13

hwE2ECcQueueBufferRaio12

Indicates the buffer size ratio of queue 12.
Range: 0-100

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.43.1.14

hwE2ECcQueueBufferRaio13

Indicates the buffer size ratio of queue 13.
Range: 0-100

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.43.1.15

hwE2ECcQueueBufferRaio14

Indicates the buffer size ratio of queue 14.
Range: 0-100

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.43.1.16

hwE2ECcQueueBufferRaio15

Indicates the buffer size ratio of queue 15.
Range: 0-100

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.43.1.17

hwCarThresholdProfileTable

table

.1.3.6.1.4.1.2011.5.14.3.44 · 1 row entry · 10 columns

Open in standard view

Indicates the car-threshold profile table. 
It is used to add, query, modify, or delete the car-threshold profile.
The index of this table is hwCarThresholdProfileIndex.

hwCarThresholdProfileEntry entry .1.3.6.1.4.1.2011.5.14.3.44.1

Indicates the car-threshold profile table.
It is used to add, query, modify, or delete the car-threshold profile.
The index of this entry is hwCarThresholdProfileIndex.

Indexes

hwCarThresholdProfileIndex

Column Syntax OID

hwCarThresholdProfileIndex

Indicates the table index.
Range: 1-4

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2011.5.14.3.44.1.1

hwCarThresholdProfileCos0

Indicates the CAR threshold of the mapping with Cos0.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
-----…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.44.1.2

hwCarThresholdProfileCos1

Indicates the CAR threshold of the mapping with Cos1.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
-----…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.44.1.3

hwCarThresholdProfileCos2

Indicates the CAR threshold of the mapping with Cos2.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
-----…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.44.1.4

hwCarThresholdProfileCos3

Indicates the CAR threshold of the mapping with Cos3.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
-----…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.44.1.5

hwCarThresholdProfileCos4

Indicates the CAR threshold of the mapping with Cos4.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
-----…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.44.1.6

hwCarThresholdProfileCos5

Indicates the CAR threshold of the mapping with Cos5.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
-----…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.44.1.7

hwCarThresholdProfileCos6

Indicates the CAR threshold of the mapping with Cos6.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
-----…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.44.1.8

hwCarThresholdProfileCos7

Indicates the CAR threshold of the mapping with Cos7.
Values are as follows:
----------------------------------------------------
| 31-24 | 23-16 | 15-8 | 7-0 |
-----…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.44.1.9

hwCarThresholdProfileRowStatus

Indicates the row status, used for creating or deleting a car-threshold profile.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create a car-threshold profile, you must specify hwCarThresholdProfileIndex and …

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.44.1.10

hwQosPolicyProfileTable

table

.1.3.6.1.4.1.2011.5.14.3.46 · 1 row entry · 36 columns

Open in standard view

Describes the attributes of a QoS policy profile, used for adding or deleting
a QoS policy profile, or modifying the status of the attributes in an existing 
QoS policy profile. 
The index of this table is hwQosPolicyProfileName.

hwQosPolicyProfileEntry entry .1.3.6.1.4.1.2011.5.14.3.46.1

Describes the attributes of a QoS policy profile, used for adding or deleting
a QoS policy profile, or modifying the status of the attributes in an existing
QoS policy profile.
The index of this entry is hwQosPolicyPr…

Indexes

hwQosPolicyProfileName

Column Syntax OID

hwQosPolicyProfileName

Indicates the name of the QoS policy profile.
Range: a string of 1-32 characters
The input index consists of the QoS policy profile name and
the length of the QoS policy profile name.
The input QoS policy profile name…

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.5.14.3.46.1.1

hwProfileCosQueueMappingMask

As a table leaf node, describes the mapping between 802.1p priority and queue.

The queue ID is 0-7. Every four bits represents the queue ID to which an 802.1p priority corresponds.
When hwProfileCosQueue…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.3.46.1.2

hwProfileCosQueueSchedMode

Indicates the queue scheduling mode.
Options:
1. strictPriority(1) -PQ
2. wrr(2) -WRR
3. wfq(3) -WFQ

In the case of PQ scheduling, PQ takes out all packets from a queue with a high priority and transmi…

Enumerationr/w

Enumerated Values:

1	strictPriority
2	wrr
3	wfq

.1.3.6.1.4.1.2011.5.14.3.46.1.3

hwProfileCosQueueWeightQue0

Indicates the weight of queue 0.
Range: 0-100
When modifying the weight of queue 0, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that …

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.46.1.4

hwProfileCosQueueWeightQue1

Indicates the weight of queue 1.
Range: 0-100
When modifying the weight of queue 1, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that …

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.46.1.5

hwProfileCosQueueWeightQue2

Indicates the weight of queue 2.
Range: 0-100
When modifying the weight of queue 2, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that …

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.46.1.6

hwProfileCosQueueWeightQue3

Indicates the weight of queue 3.
Range: 0-100
When modifying the weight of queue 3, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that …

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.46.1.7

hwProfileCosQueueWeightQue4

Indicates the weight of queue 4.
Range: 0-100
When modifying the weight of queue 4, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that …

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.46.1.8

hwProfileCosQueueWeightQue5

Indicates the weight of queue 5.
Range: 0-100
When modifying the weight of queue 5, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that …

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.46.1.9

hwProfileCosQueueWeightQue6

Indicates the weight of queue 6.
Range: 0-100
When modifying the weight of queue 6, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that …

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.46.1.10

hwProfileCosQueueWeightQue7

Indicates the weight of queue 7.
Range: 0-100
When modifying the weight of queue 7, if the queue schedule mode is wrr, make sure that the sum of weights equals to 100,
if the queue schedule mode is wfq, make sure that …

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.3.46.1.11

hwProfileCosQueueDepthRateQue0

Indicates the depth rate of queue 0.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to invalid settings, -1 as a uni…

Integer32r/w

Constraints:
range: -1-100

.1.3.6.1.4.1.2011.5.14.3.46.1.12

hwProfileCosQueueDepthRateQue1

Indicates the depth rate of queue 1.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to invalid settings, -1 as a uni…

Integer32r/w

Constraints:
range: -1-100

.1.3.6.1.4.1.2011.5.14.3.46.1.13

hwProfileCosQueueDepthRateQue2

Indicates the depth rate of queue 2.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to invalid settings, -1 as a uni…

Integer32r/w

Constraints:
range: -1-100

.1.3.6.1.4.1.2011.5.14.3.46.1.14

hwProfileCosQueueDepthRateQue3

Indicates the depth rate of queue 3.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to invalid settings, -1 as a uni…

Integer32r/w

Constraints:
range: -1-100

.1.3.6.1.4.1.2011.5.14.3.46.1.15

hwProfileCosQueueDepthRateQue4

Indicates the depth rate of queue 4.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to invalid settings, -1 as a uni…

Integer32r/w

Constraints:
range: -1-100

.1.3.6.1.4.1.2011.5.14.3.46.1.16

hwProfileCosQueueDepthRateQue5

Indicates the depth rate of queue 5.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to invalid settings, -1 as a uni…

Integer32r/w

Constraints:
range: -1-100

.1.3.6.1.4.1.2011.5.14.3.46.1.17

hwProfileCosQueueDepthRateQue6

Indicates the depth rate of queue 6.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to invalid settings, -1 as a uni…

Integer32r/w

Constraints:
range: -1-100

.1.3.6.1.4.1.2011.5.14.3.46.1.18

hwProfileCosQueueDepthRateQue7

Indicates the depth rate of queue 7.
Range: 0-100, -1
The larger the percentage, the more packets can be buffered. The sum of percentages must be 100%.
When the percentages are restored to invalid settings, -1 as a uni…

Integer32r/w

Constraints:
range: -1-100

.1.3.6.1.4.1.2011.5.14.3.46.1.19

hwProfileCosQueueWREDIndexQue0

Indicates the index of a WRED profile to be bound of queue 0.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop informati…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.46.1.20

hwProfileCosQueueWREDIndexQue1

Indicates the index of a WRED profile to be bound of queue 1.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop informati…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.46.1.21

hwProfileCosQueueWREDIndexQue2

Indicates the index of a WRED profile to be bound of queue 2.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop informati…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.46.1.22

hwProfileCosQueueWREDIndexQue3

Indicates the index of a WRED profile to be bound of queue 3.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop informati…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.46.1.23

hwProfileCosQueueWREDIndexQue4

Indicates the index of a WRED profile to be bound of queue 4.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop informati…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.46.1.24

hwProfileCosQueueWREDIndexQue5

Indicates the index of a WRED profile to be bound of queue 5.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop informati…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.46.1.25

hwProfileCosQueueWREDIndexQue6

Indicates the index of a WRED profile to be bound of queue 6.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop informati…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.46.1.26

hwProfileCosQueueWREDIndexQue7

Indicates the index of a WRED profile to be bound of queue 7.
Make sure that the WRED profile be already created in hwWREDTable and the WRED profile information be complete
(that is, including the early drop informati…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.46.1.27

hwProfileCosQueueMaxBufferSizeQueue0

Indicates the maximum depth of queue 0.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 0 is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 32-8192

.1.3.6.1.4.1.2011.5.14.3.46.1.28

hwProfileCosQueueMaxBufferSizeQueue1

Indicates the maximum depth of queue 1.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 1 is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 32-8192

.1.3.6.1.4.1.2011.5.14.3.46.1.29

hwProfileCosQueueMaxBufferSizeQueue2

Indicates the maximum depth of queue 2.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 2 is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 32-8192

.1.3.6.1.4.1.2011.5.14.3.46.1.30

hwProfileCosQueueMaxBufferSizeQueue3

Indicates the maximum depth of queue 3.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 3 is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 32-8192

.1.3.6.1.4.1.2011.5.14.3.46.1.31

hwProfileCosQueueMaxBufferSizeQueue4

Indicates the maximum depth of queue 4.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 4 is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 32-8192

.1.3.6.1.4.1.2011.5.14.3.46.1.32

hwProfileCosQueueMaxBufferSizeQueue5

Indicates the maximum depth of queue 5.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 5 is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 32-8192

.1.3.6.1.4.1.2011.5.14.3.46.1.33

hwProfileCosQueueMaxBufferSizeQueue6

Indicates the maximum depth of queue 6.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 6 is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 32-8192

.1.3.6.1.4.1.2011.5.14.3.46.1.34

hwProfileCosQueueMaxBufferSizeQueue7

Indicates the maximum depth of queue 7.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 7 is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 32-8192

.1.3.6.1.4.1.2011.5.14.3.46.1.35

hwQosPolicyProfileRowStatus

Indicates the row status, used for creating or deleting a Qos policy profile.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create a Qos policy profile, set hwQosPolicyProfileRowStatus to createAndGo(4)
to…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.46.1.255

hwPortBindQosPolicyProfileTable

table

.1.3.6.1.4.1.2011.5.14.3.47 · 1 row entry · 4 columns

Open in standard view

This table is used for binding or unbinding a QoS policy profile to one port.
The index of this table is ifIndex, hwPortBindQosPolicyProfileSecondIndex, hwPortBindQosPolicyProfileThirdIndex.

hwPortBindQosPolicyProfileEntry entry .1.3.6.1.4.1.2011.5.14.3.47.1

This table is used for binding or unbinding a QoS policy profile to one port .
The index of this entry is ifIndex, hwPortBindQosPolicyProfileSecondIndex, hwPortBindQosPolicyProfileThirdIndex.

Indexes

IF-MIBifIndex hwPortBindQosPolicyProfileSecondIndex hwPortBindQosPolicyProfileThirdIndex

Column	Syntax	OID
hwPortBindQosPolicyProfileSecondIndex Reserved index, an invalid value needs to be input for this leaf. The invalid value is defined as -1.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.3.47.1.1`
hwPortBindQosPolicyProfileThirdIndex Reserved index, an invalid value needs to be input for this leaf. The invalid value is defined as -1.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.3.47.1.2`
hwPortBindQosPolicyProfileName Indicates the name of the QoS policy profile bound to a port in the outbound direction. Range: a string of 0-32 characters This leaf identifies a QoS policy profile, which must be created in hwQosPolicyProfileTable. Th…	OctetStringr/w Constraints: `range: 0-32`	`.1.3.6.1.4.1.2011.5.14.3.47.1.3`
hwPortBindInboundQosPolicyProfileName Indicates the name of the QoS policy profile bound to a port in the inbound direction. Range: a string of 0-32 characters This leaf identifies a QoS policy profile, which must be created in hwQosPolicyProfileTable. The…	OctetStringr/w Constraints: `range: 0-32`	`.1.3.6.1.4.1.2011.5.14.3.47.1.4`

hwPortStatisticsExcludeMulticastQueueTable

table

.1.3.6.1.4.1.2011.5.14.3.50 · 1 row entry · 1 columns

Open in standard view

This table is used for setting exclude port multicase statistics queue ID.
The index of this table is hwFrameIndex, hwSlotIndex.

hwPortStatisticsExcludeMulticastQueueEntry entry .1.3.6.1.4.1.2011.5.14.3.50.1

This table is used for setting exclude port multicase statistics queue ID.
The index of this entry is hwFrameIndex, hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column	Syntax	OID
hwPortStatisticsExcludeMulticastQueueID Specify one queue from 0 to 7, port multicast yellow and green packet statistics will exclude the specified queue. -1 means not specify multicast statistics queue, port yellow and green packet statistics will include qu…	Integer32r/w Constraints: `range: -1-7`	`.1.3.6.1.4.1.2011.5.14.3.50.1.1`

hwXponPortJumboEnableTable

table

.1.3.6.1.4.1.2011.5.14.3.51 · 1 row entry · 1 columns

Open in standard view

Indicates the jumbo frames configuration table of a xPON port. 
It is used for setting the jumbo frames of a xPON port.
The index of this table is ifIndex.

hwXponPortJumboEnableEntry entry .1.3.6.1.4.1.2011.5.14.3.51.1

Indicates the jumbo frames configuration table of a xPON port.
It is used for setting the jumbo frames of a xPON port.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column Syntax OID

hwXponPortJumboEnable

Enumerationr/w

Enumerated Values:

-1	invalid
1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.14.3.51.1.1

hwDscpToDscpMappingTable

table

.1.3.6.1.4.1.2011.5.14.3.52 · 1 row entry · 10 columns

Open in standard view

Indicates the DSCP to DSCP mapping table. This table is used to configure or query the mapping
between the DSCP and DSCP. It only supports the modify operation but not the create or delete operation.
The fist record of this table is the default record of the system and cannot be modified.
The index of this table is hwDscpToDscpMappingIndex.

hwDscpToDscpMappingEntry entry .1.3.6.1.4.1.2011.5.14.3.52.1

Indexes

hwDscpToDscpMappingIndex

Column Syntax OID

hwDscpToDscpMappingIndex

Indicates the index of the DSCP-to-DSCP mapping table.
Range: 1-4
By default, the system supports four DSCP-to-DSCP mapping tables.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2011.5.14.3.52.1.1

hwDscpListMapToDscp0

This leaf is a string of 16 bytes. Every two bytes (16 bits) indicate an DSCP.
The 16 bytes represent DSCPs 0 to 7 (from the left to the right) of a DSCP mapping.
The structure is as follows:
-----------------…

OctetStringr/w

Constraints:
range: 16-16

.1.3.6.1.4.1.2011.5.14.3.52.1.2

hwDscpListMapToDscp1

This leaf is a string of 16 bytes. Every two bytes (16 bits) indicate an DSCP.
The 16 bytes represent DSCPs 8 to 15 (from the left to the right) of a DSCP mapping.
The structure is as follows:
----------------…

OctetStringr/w

Constraints:
range: 16-16

.1.3.6.1.4.1.2011.5.14.3.52.1.3

hwDscpListMapToDscp2

This leaf is a string of 16 bytes. Every two bytes (16 bits) indicate an DSCP.
The 16 bytes represent DSCPs 16 to 23 (from the left to the right) of a DSCP mapping.
The structure is as follows:
---------------…

OctetStringr/w

Constraints:
range: 16-16

.1.3.6.1.4.1.2011.5.14.3.52.1.4

hwDscpListMapToDscp3

This leaf is a string of 16 bytes. Every two bytes (16 bits) indicate an DSCP.
The 16 bytes represent DSCPs 24 to 31 (from the left to the right) of a DSCP mapping.
The structure is as follows:
---------------…

OctetStringr/w

Constraints:
range: 16-16

.1.3.6.1.4.1.2011.5.14.3.52.1.5

hwDscpListMapToDscp4

This leaf is a string of 16 bytes. Every two bytes (16 bits) indicate an DSCP.
The 16 bytes represent DSCPs 32 to 39 (from the left to the right) of a DSCP mapping.
The structure is as follows:
---------------…

OctetStringr/w

Constraints:
range: 16-16

.1.3.6.1.4.1.2011.5.14.3.52.1.6

hwDscpListMapToDscp5

This leaf is a string of 16 bytes. Every two bytes (16 bits) indicate an DSCP.
The 16 bytes represent DSCPs 40 to 16 (from the left to the right) of a DSCP mapping.
The structure is as follows:
---------------…

OctetStringr/w

Constraints:
range: 16-16

.1.3.6.1.4.1.2011.5.14.3.52.1.7

hwDscpListMapToDscp6

This leaf is a string of 16 bytes. Every two bytes (16 bits) indicate an DSCP.
The 16 bytes represent DSCPs 47 to 54 (from the left to the right) of a DSCP mapping.
The structure is as follows:
---------------…

OctetStringr/w

Constraints:
range: 16-16

.1.3.6.1.4.1.2011.5.14.3.52.1.8

hwDscpListMapToDscp7

This leaf is a string of 16 bytes. Every two bytes (16 bits) indicate an DSCP.
The 16 bytes represent DSCPs 55 to 63 (from the left to the right) of a DSCP mapping.
The structure is as follows:
---------------…

OctetStringr/w

Constraints:
range: 16-16

.1.3.6.1.4.1.2011.5.14.3.52.1.9

hwDscpToDscpMapRowStatus

Indicates the row status.
It supports only the query function. active(1) is displayed in the query result.
Options:
1. active(1) -indicates the query operation

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.52.1.10

hwDscpColorToPbitsMappingTable

table

.1.3.6.1.4.1.2011.5.14.3.53 · 1 row entry · 10 columns

Open in standard view

Indicates the color-DSCP-to-802.1p priority mapping profile.It is used to modify and query
the color-DSCP-to-802.1p priority mapping relationships in the system.
The index of this table is hwDscpColorToPbitsMappingIndex.
By default, the system supports four color-DSCP-to-802.1p priority mapping profiles.
These priority mapping tables can be queried or modified, but cannot be created or deleted.
The color-DSCP-to-802.1p priority mapping table with index 1 cannot be modified.

hwDscpColorToPbitsMappingEntry entry .1.3.6.1.4.1.2011.5.14.3.53.1

Indexes

hwDscpColorToPbitsMappingIndex

Column Syntax OID

hwDscpColorToPbitsMappingIndex

Indicates the index of the color-DSCP-to-802.1p priority mapping table.
Range: 1-50
By default, the system supports fifty DSCP-to-DSCP priority mapping tables.

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.2011.5.14.3.53.1.1

hwDscpColorListMapToPriority0

This leaf is a string of 8 bytes. Every one bytes (8 bits) indicate an 802.1p priority.
The 8 bytes represent priorities 0 to 7 (from the left to the right) of a DSCP mapping. The structure is as follows:
-----…

OctetStringr/w

Constraints:
range: 8-8

.1.3.6.1.4.1.2011.5.14.3.53.1.2

hwDscpColorListMapToPriority1

This leaf is a string of 8 bytes. Every one bytes (8 bits) indicate an 802.1p priority.
The 8 bytes represent priorities 8 to 15 (from the left to the right) of a DSCP mapping. The structure is as follows:
----…

OctetStringr/w

Constraints:
range: 8-8

.1.3.6.1.4.1.2011.5.14.3.53.1.3

hwDscpColorListMapToPriority2

This leaf is a string of 8 bytes. Every one bytes (8 bits) indicate an 802.1p priority.
The 8 bytes represent priorities 16 to 23 (from the left to the right) of a DSCP mapping. The structure is as follows:
---…

OctetStringr/w

Constraints:
range: 8-8

.1.3.6.1.4.1.2011.5.14.3.53.1.4

hwDscpColorListMapToPriority3

This leaf is a string of 8 bytes. Every one bytes (8 bits) indicate an 802.1p priority.
The 8 bytes represent priorities 24 to 31 (from the left to the right) of a DSCP mapping. The structure is as follows:
---…

OctetStringr/w

Constraints:
range: 8-8

.1.3.6.1.4.1.2011.5.14.3.53.1.5

hwDscpColorListMapToPriority4

This leaf is a string of 8 bytes. Every one bytes (8 bits) indicate an 802.1p priority.
The 8 bytes represent priorities 32 to 39 (from the left to the right) of a DSCP mapping. The structure is as follows:
--…

OctetStringr/w

Constraints:
range: 8-8

.1.3.6.1.4.1.2011.5.14.3.53.1.6

hwDscpColorListMapToPriority5

This leaf is a string of 8 bytes. Every one bytes (8 bits) indicate an 802.1p priority.
The 8 bytes represent priorities 40 to 46 (from the left to the right) of a DSCP mapping. The structure is as follows:
---…

OctetStringr/w

Constraints:
range: 8-8

.1.3.6.1.4.1.2011.5.14.3.53.1.7

hwDscpColorListMapToPriority6

This leaf is a string of 8 bytes. Every one bytes (8 bits) indicate an 802.1p priority.
The 8 bytes represent priorities 47 to 54 (from the left to the right) of a DSCP mapping. The structure is as follows:
---…

OctetStringr/w

Constraints:
range: 8-8

.1.3.6.1.4.1.2011.5.14.3.53.1.8

hwDscpColorListMapToPriority7

This leaf is a string of 8 bytes. Every one bytes (8 bits) indicate an 802.1p priority.
The 8 bytes represent priorities 55 to 63 (from the left to the right) of a DSCP mapping. The structure is as follows:
---…

OctetStringr/w

Constraints:
range: 8-8

.1.3.6.1.4.1.2011.5.14.3.53.1.9

hwDscpColorToPbitsMapRowStatus

Indicates the row status.
It supports only the query function. active(1) is displayed in the query result.
Options:
1. active(1) -indicates the query operation

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.53.1.10

hwOntBindQosPolicyProfileTable

table

.1.3.6.1.4.1.2011.5.14.3.54 · 1 row entry · 2 columns

Open in standard view

This table is used for binding or unbinding a QoS policy profile to the ONT.
The index of this table is ifIndex, hwOntBindQosPolicyProfileOntId.

hwOntBindQosPolicyProfileEntry entry .1.3.6.1.4.1.2011.5.14.3.54.1

This table is used for binding or unbinding a QoS policy profile to the ONT.
The index of this entry is ifIndex, hwOntBindQosPolicyProfileOntId.

Indexes

IF-MIBifIndex hwOntBindQosPolicyProfileOntId

Column	Syntax	OID
hwOntBindQosPolicyProfileOntId Indicates the ONT ID.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.3.54.1.1`
hwOntBindQosPolicyProfileName Indicates the name of the QoS policy profile bound to the ONT. Range: a string of 0-32 characters This leaf identifies a QoS policy profile, which must be created in hwQosPolicyProfileTable. The null character string i…	OctetStringr/w Constraints: `range: 0-32`	`.1.3.6.1.4.1.2011.5.14.3.54.1.2`

hwUplinkSwitchNotifyIpDetectTable

table

.1.3.6.1.4.1.2011.5.14.3.55.4 · 1 row entry · 6 columns

Open in standard view

Bound IP address list to be detected.
The index of this table is hwUplinkSwitchNotifyIpDetectServicePortIndex, hwUplinkSwitchNotifyIpDetectSubIndex.

hwUplinkSwitchNotifyIpDetectEntry entry .1.3.6.1.4.1.2011.5.14.3.55.4.1

Bound IP address list to be detected.
The index of this entry is hwUplinkSwitchNotifyIpDetectServicePortIndex, hwUplinkSwitchNotifyIpDetectSubIndex.

Indexes

hwUplinkSwitchNotifyIpDetectServicePortIndex hwUplinkSwitchNotifyIpDetectSubIndex

Column Syntax OID

hwUplinkSwitchNotifyIpDetectServicePortIndex

Indicates the index of the service port bound to a detected IP address.
The service port corresponding to this index must already be created in
hwExtSrvFlowEntry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.55.4.1.1

hwUplinkSwitchNotifyIpDetectSubIndex

This index is used for specifying the position on the service port for detecting the IP address.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.55.4.1.2

hwUplinkSwitchNotifyIpDetectIpAddressType

Indicates the IP address type to detect.
Options:
1. ipv4(1) -indicates that the IP address type is ipv4
2. ipv6(2) -indicates that the IP address type is ipv6

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.14.3.55.4.1.3

hwUplinkSwitchNotifyIpDetectIpAddress

Indicates the IP address to detect.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.14.3.55.4.1.4

hwUplinkSwitchNotifyIpDetectIpv6PrefixLength

The IP address mask length.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.3.55.4.1.5

hwUplinkSwitchNotifyIpDetectMac

The MAC address obtained in IP address detection.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.2011.5.14.3.55.4.1.6

hwIpTrafficNameToIndexTable

table

.1.3.6.1.4.1.2011.5.14.3.57 · 1 row entry · 1 columns

Open in standard view

Indicates the traffic profile name-traffic profile index mapping table.
The index of this table is hwIpTrafficName.

hwIpTrafficNameToIndexEntry entry .1.3.6.1.4.1.2011.5.14.3.57.1

Indicates the traffic profile name-traffic profile index mapping table.
The index of this entry is hwIpTrafficName.

Indexes

hwIpTrafficName

Column	Syntax	OID
hwIpTrafficNameToIndexIdx Indicates the corresponding index of a given traffic profile name. The traffic profile name must have been created in hwIpTrafficParamTable.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.3.57.1.1`

hwQueueMaxBufferSizeTable

table

.1.3.6.1.4.1.2011.5.14.3.58 · 1 row entry · 10 columns

Open in standard view

Indicates the maximum depth of a port queue or ONT queue configured based on boards.
The indexes of this table are hwFrameIndex, hwSlotIndex, and hwQueueMaxBufferSizeType.

hwQueueMaxBufferSizeEntry entry .1.3.6.1.4.1.2011.5.14.3.58.1

Indicates the maximum depth of a port queue or ONT queue configured based on boards.
The indexes of this entry are hwFrameIndex, hwSlotIndex, and hwQueueMaxBufferSizeType.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex hwQueueMaxBufferSizeType

Column Syntax OID

hwQueueMaxBufferSizeType

Indicates the type of the queue having the maximum depth based on boards.
Options:
1. portQueue(0) -Indicates the maximum queue depth of ports on a board.
2. ontQueue(1) -Indicates the maximum queue depth of onts …

Enumeration

Enumerated Values:

0	portQueue
1	ontQueue

.1.3.6.1.4.1.2011.5.14.3.58.1.1

hwQueueMaxBufferSizeQueue0

Indicates the maximum depth of queue 0 based on boards.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 0 is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 32-8192

.1.3.6.1.4.1.2011.5.14.3.58.1.2

hwQueueMaxBufferSizeQueue1

Indicates the maximum depth of queue 1 based on boards.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 1 is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 32-8192

.1.3.6.1.4.1.2011.5.14.3.58.1.3

hwQueueMaxBufferSizeQueue2

Indicates the maximum depth of queue 2 based on boards.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 2 is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 32-8192

.1.3.6.1.4.1.2011.5.14.3.58.1.4

hwQueueMaxBufferSizeQueue3

Indicates the maximum depth of queue 3 based on boards.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 3 is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 32-8192

.1.3.6.1.4.1.2011.5.14.3.58.1.5

hwQueueMaxBufferSizeQueue4

Indicates the maximum depth of queue 4 based on boards.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 4 is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 32-8192

.1.3.6.1.4.1.2011.5.14.3.58.1.6

hwQueueMaxBufferSizeQueue5

Indicates the maximum depth of queue 5 based on boards.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 5 is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 32-8192

.1.3.6.1.4.1.2011.5.14.3.58.1.7

hwQueueMaxBufferSizeQueue6

Indicates the maximum depth of queue 6 based on boards.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 6 is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 32-8192

.1.3.6.1.4.1.2011.5.14.3.58.1.8

hwQueueMaxBufferSizeQueue7

Indicates the maximum depth of queue 7 based on boards.
Range: 32-8192.
Default value: -1, indicating that the maximum depth of queue 7 is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 32-8192

.1.3.6.1.4.1.2011.5.14.3.58.1.9

hwQueueMaxBufferSizeRowStatus

Indicates the row status and is used for creating or deleting
a maximum depth of queue item.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
Only options createAndGo(4) and destroy(6) are supported the set ope…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.58.1.255

hwRateProfileTable

table

.1.3.6.1.4.1.2011.5.14.3.59 · 1 row entry · 11 columns

Open in standard view

Indicates the rate profile. 
It is used to add, query, modify, or delete an rate profile. 
This table mainly involves configuring CAR parameters such as CIR, PIR, 
CBS, and PBS. 
The index of this table is hwRateProfileName.

hwRateProfileEntry entry .1.3.6.1.4.1.2011.5.14.3.59.1

Indicates the rate profile.
It is used to add, query, modify, or delete an rate profile.
This table mainly involves configuring CAR parameters such as CIR, PIR,
CBS, and PBS.
The index of this entry is hwRateProfile…

Indexes

hwRateProfileName

Column Syntax OID

hwRateProfileName

Indicates the name of the rate profile.
Range: a string of 1-32 characters
The input index consists of the rate profile name and
the length of the rate profile name.
The input profile name must be ASCII codes.
Assume …

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.5.14.3.59.1.1

hwRateProfileRowStatus

Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.59.1.2

hwRateProfileCir

Indicates the committed information RateProfile (CIR).
Range: -1, 0-10240000 kbit/s.
Unit: kbit/s.
CIR is a mandatory parameter. This parameter must be an integer multiple of 64.
If the entered value is not an integer…

Integer32r/w

Constraints:
range: -1-10240000

.1.3.6.1.4.1.2011.5.14.3.59.1.3

hwRateProfileCbs

Integer32r/w

Constraints:
range: -1-1024000000

.1.3.6.1.4.1.2011.5.14.3.59.1.4

hwRateProfilePir

Indicates the peak information RateProfile (PIR).
Range: -1, 64-10240000 kbit/s.
Unit: kbit/s.
PIR is an optional parameter. If the parameter is not specified,
it can be obtained through formula max(min(2*cir,10240000…

Integer32r/w

Constraints:
range: -1--1
range: 64-10240000

.1.3.6.1.4.1.2011.5.14.3.59.1.5

hwRateProfilePbs

Integer32r/w

Constraints:
range: -1--1
range: 2000-1024000000

.1.3.6.1.4.1.2011.5.14.3.59.1.6

hwRateProfileFixBandWidth

Indicates the fixed bandwidth to be allocated by the DBA. This parameter takes effect to the E2E service flow only on a GPON board.
Range: -1, 0-10240000 kbit/s.
Unit: kbit/s.
hwRateProfileFixBandWidth must be smaller t…

Integer32r/w

Constraints:
range: -1-10240000

.1.3.6.1.4.1.2011.5.14.3.59.1.7

hwRateProfileColorMode

Indicates the color-aware mode of the Rate profile.
Options:
1. colorBlind(1) -Indicates color blind mode.
2. colorAware(2) -Indicates color aware mode.
Default: colorBlind(1)

Enumerationr/w

Enumerated Values:

1	colorBlind
2	colorAware

.1.3.6.1.4.1.2011.5.14.3.59.1.8

hwRateProfileCarThresholdProfileIndex

Indicates the car-threshold profile of the Rate profile.
-1 indicates car-threshold profile is disabled.

Integer32r/w

Constraints:
range: -1--1
range: 1-4

.1.3.6.1.4.1.2011.5.14.3.59.1.9

hwRateProfileCouplingFlag

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2011.5.14.3.59.1.10

hwRateProfileIndex

Indicates the index of the rate profile.
Range: 1-256

Integer32r/w

Constraints:
range: 1-256

.1.3.6.1.4.1.2011.5.14.3.59.1.11

hwQueuePolicyProfileTable

table

.1.3.6.1.4.1.2011.5.14.3.60 · 1 row entry · 5 columns

Open in standard view

Indicates the queue policy profile table. It is used to add, modify, query, or delete a queue policy profile.
The index of this table is hwQueuePolicyProfileIndex.

hwQueuePolicyProfileEntry entry .1.3.6.1.4.1.2011.5.14.3.60.1

Indicates the queue policy profile table. It is used to add, modify, query, or delete a queue policy profile.
The index of this entry is hwQueuePolicyProfileIndex.

Indexes

hwQueuePolicyProfileIndex

Column Syntax OID

hwQueuePolicyProfileIndex

Indicates the index of the queue policy profile.
Range: 1-4

Unsigned32

Constraints:
range: 1-4

.1.3.6.1.4.1.2011.5.14.3.60.1.1

hwQueuePolicyProfilePrioritySource

Indicates the priority source of the queue policy profile.
Options:
1. outer8021p(1) -indicates the priority source is outer 8021p.
2. inner8021p(2) -indicates the priority source is inner 8021p.
Default: outer8021p(1)

Enumerationr/w

Enumerated Values:

1	outer8021p
2	inner8021p

.1.3.6.1.4.1.2011.5.14.3.60.1.2

hwQueuePolicyProfilePriorityMappingIndex

Indicates the mapping profile index of the queue policy profile.
Range: 1-8
Default: 1

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.2011.5.14.3.60.1.3

hwQueuePolicyProfileDefaultQueueCos

Indicates the default priority of the queue policy profile.
Range: 0-7
Default: 0

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2011.5.14.3.60.1.4

hwQueuePolicyProfileRowStatus

Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.60.1.5

hwPriorityGroupProfileTable

table

.1.3.6.1.4.1.2011.5.14.3.61 · 1 row entry · 13 columns

Open in standard view

Indicates the priority group profile table. It is used to add, modify, query, or delete a priority group profile.
The index of this table is hwPriorityGroupProfileName.

hwPriorityGroupProfileEntry entry .1.3.6.1.4.1.2011.5.14.3.61.1

Indicates the priority group profile table. It is used to add, modify, query, or delete a priority group profile.
The index of this entry is hwPriorityGroupProfileName.

Indexes

hwPriorityGroupProfileName

Column Syntax OID

hwPriorityGroupProfileName

Indicates the name of the priority group profile.
Range: a string of 1-32 characters
The input index consists of the priority group profile name and
the length of the priority group profile name.
The input profile nam…

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.5.14.3.61.1.1

hwPriorityGroupProfilePrioritySource

Indicates the priority source of the priority group profile.
Options:
1. outer8021p(1) -indicates the priority source is outer 8021p.
2. inner8021p(2) -indicates the priority source is inner 8021p.
Default: outer8021p(1)

Enumerationr/w

Enumerated Values:

1	outer8021p
2	inner8021p

.1.3.6.1.4.1.2011.5.14.3.61.1.2

hwPriorityGroupProfilePriorityMappingIndex

Indicates the CoS-group table index of the priority group profile.
Range: 1-8
Default: 1

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.2011.5.14.3.61.1.3

hwPriorityGroupProfileDefaultGroupIndex

Indicates the default group index of the priority group profile.
Range: 0-7
Default: 0

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2011.5.14.3.61.1.4

hwPriorityGroupProfileRowStatus

Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.61.1.5

hwPriorityGroupProfileGroup0RateProfileIndex

Indicates the index of the rate profile bound to Car-group 0.
-1 indicates priority group car is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 1-256

.1.3.6.1.4.1.2011.5.14.3.61.1.6

hwPriorityGroupProfileGroup1RateProfileIndex

Indicates the index of the rate profile bound to Car-group 1.
-1 indicates priority group car is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 1-256

.1.3.6.1.4.1.2011.5.14.3.61.1.7

hwPriorityGroupProfileGroup2RateProfileIndex

Indicates the index of the rate profile bound to Car-group 2.
-1 indicates priority group car is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 1-256

.1.3.6.1.4.1.2011.5.14.3.61.1.8

hwPriorityGroupProfileGroup3RateProfileIndex

Indicates the index of the rate profile bound to Car-group 3.
-1 indicates priority group car is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 1-256

.1.3.6.1.4.1.2011.5.14.3.61.1.9

hwPriorityGroupProfileGroup4RateProfileIndex

Indicates the index of the rate profile bound to Car-group 4.
-1 indicates priority group car is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 1-256

.1.3.6.1.4.1.2011.5.14.3.61.1.10

hwPriorityGroupProfileGroup5RateProfileIndex

Indicates the index of the rate profile bound to Car-group 5.
-1 indicates priority group car is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 1-256

.1.3.6.1.4.1.2011.5.14.3.61.1.11

hwPriorityGroupProfileGroup6RateProfileIndex

Indicates the index of the rate profile bound to Car-group 6.
-1 indicates priority group car is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 1-256

.1.3.6.1.4.1.2011.5.14.3.61.1.12

hwPriorityGroupProfileGroup7RateProfileIndex

Indicates the index of the rate profile bound to Car-group 7.
-1 indicates priority group car is not configured.

Integer32r/w

Constraints:
range: -1--1
range: 1-256

.1.3.6.1.4.1.2011.5.14.3.61.1.13

hwPriorityGroupCarStatTable

table

.1.3.6.1.4.1.2011.5.14.3.63 · 1 row entry · 9 columns

Open in standard view

Used for priority group car statistics collection.
Indicates the table that contains the configuration information of priority group car statistics. It is used to create, modify,
delete and query priority group car statistics.
The indexes of this table are hwPriorityGroupCarStatFlowIndex, hwPriorityGroupCarStatGroupIndex and hwPriorityGroupCarStatDirection.

hwPriorityGroupCarStatEntry entry .1.3.6.1.4.1.2011.5.14.3.63.1

Indexes

hwPriorityGroupCarStatFlowIndex hwPriorityGroupCarStatDirection hwPriorityGroupCarStatGroupIndex

Column Syntax OID

hwPriorityGroupCarStatFlowIndex

Indicates the service flow index, a unique value to identify a service flow.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.63.1.1

hwPriorityGroupCarStatDirection

Indicates the direction of priority group car statistics.
Options:
1.inbound(1) - indicates the direction of priority group car statistics is inbound
2.outbound(2) - indicates the direction of priority group car st…

Enumeration

Enumerated Values:

1	inbound
2	outbound

.1.3.6.1.4.1.2011.5.14.3.63.1.2

hwPriorityGroupCarStatGroupIndex

Indicates the priority group index of priority group car statistics.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.2011.5.14.3.63.1.3

hwPriorityGroupCarStatRowStatus

Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.3.63.1.4

hwPriorityGroupCarStatCountClear

Clears extended statistics of a specified priority group car.
This node does not need to be specified during the start of extended statistics
collection for a priority group car.
Options:
1.cleared(1) - reset the sta…

Enumerationr/w

Enumerated Values:

1	cleared
2	nouse

.1.3.6.1.4.1.2011.5.14.3.63.1.5

hwPriorityGroupCarStatTimeoutDuration

Indicates the duration of the priority group-based CAR statistics.
-1 indicates the priority group-based CAR statistics dose not stop.

Integer32r/w

Constraints:
range: -1--1
range: 1-1440

.1.3.6.1.4.1.2011.5.14.3.63.1.6

hwPriorityGroupCarStatRunningStatus

Indicates the current status of statistics collection of a specified priority group car.
This node has two enumerated values: running and timeout.
Options:
1.running(1) -indicate the statistic to the specified priority…

Enumeration

Enumerated Values:

1	running
2	timeout

.1.3.6.1.4.1.2011.5.14.3.63.1.7

hwPriorityGroupCarStatDiscardPackets

Indicates the number of discarded packets of a specified priority group car.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.3.63.1.8

hwPriorityGroupCarStatRemainTime

Indicates the remaining time for the priority group-based CAR statistics.
0 indicates starting priority group-based CAR statistics measurement overtime.
-1 indicates the priority group-based CAR statistics dose not stop.

Integer32

Constraints:
range: -1-1440

.1.3.6.1.4.1.2011.5.14.3.63.1.9

hwXponPortMtuTable

table

.1.3.6.1.4.1.2011.5.14.3.66 · 1 row entry · 1 columns

Open in standard view

Indicates the MTU configuration table of a xPON port. 
It is used for setting the MTU of a xPON port.
The index of this table is ifIndex.

hwXponPortMtuEntry entry .1.3.6.1.4.1.2011.5.14.3.66.1

Indicates the MTU configuration table of a xPON port.
It is used for setting the MTU of a xPON port.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwXponPortMtu This object is used for setting the MTU of a xPON port. 0 indicates to restore the default value. -1 indicates the value is invalid. Range: -1-0, 1519-9280	Integer32r/w Constraints: `range: -1-0` `range: 1519-9280`	`.1.3.6.1.4.1.2011.5.14.3.66.1.1`

hwQueuePerformanceStatsTable

table

.1.3.6.1.4.1.2011.5.14.3.67 · 1 row entry · 14 columns

Open in standard view

Indicates the information about packets passed or dropped by a queue on a port in a 15-minute or 24-hour statistical period and the information about passed bytes.
The indexes of this table are ifIndex,hwQueueId,hwQueueStatsIntervalType,and hwQueueStatsIntervalNumId.

hwQueuePerformanceStatsEntry entry .1.3.6.1.4.1.2011.5.14.3.67.1

Indicates the information about packets passed or dropped by a queue on a port in a 15-minute or 24-hour statistical period and the information about passed bytes.
The indexes of this entry are ifIndex,hwQueueId,hwQueue…

Indexes

hwQueueifIndex hwQueueId hwQueueStatsIntervalType hwQueueStatsIntervalNumId

Column Syntax OID

hwQueueStatsIntervalType

The type of queue Performance Statistic.
Options:
1. intervaltime15min(0) -current-15minutes or historic-15minutes
2. everbefore(1) -everbefore

Enumeration

Enumerated Values:

0	intervaltime15min
1	everbefore

.1.3.6.1.4.1.2011.5.14.3.67.1.1

hwQueueStatsIntervalNumId

The interval number of queue Performance Statistic.
When hwQueueStatsIntervalType is intervaltime15min, 0 represents current 15 minutes interval.

Integer32

Constraints:
range: 0-96

.1.3.6.1.4.1.2011.5.14.3.67.1.2

hwQueueStatsDroppedYellowNumber

Indicates the number of dropped yellow packets.
After a packet is sent downstream, the statistics of dropped packets are increased by 1 if the packet fails to pass.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.3.67.1.3

hwQueueStatsDroppedGreenNumber

Indicates the number of dropped green packets.
After a packet is sent downstream, the statistics of dropped packets are increased by 1 if the packet fails to pass.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.3.67.1.4

hwQueueStatsDroppedUnRecognizedColorNumber

Indicates the number of dropped unrecognized color packets.
After a packet is sent downstream, the statistics of dropped packets are increased by 1 if the packet fails to pass.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.3.67.1.5

hwQueueStatsPassedNumber

Indicates the number of pass-through packets.
After a packet is sent downstream, the statistics of pass-through packets are increased by 1 if the packet passes.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.3.67.1.6

hwQueueStatsPassedBytes

Indicates the number of pass-through bytes.
After a byte is sent downstream, the statistics of pass-through bytes are increased by 1 if the byte passes.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.3.67.1.7

hwQueueStatsTimeElapsed

The elapsed time of the current interval.
'-1' means invalid value.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.3.67.1.8

hwQueueStatsValidInterval

Whether the interval number is valid.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.5.14.3.67.1.9

hwQueueStatsStartTime

Start time of the interval.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.2011.5.14.3.67.1.10

hwQueueStatsPassedGreenBytes

Indicates the number of pass-through bytes of green packets.
After a byte is sent downstream, the statistics of pass-through bytes are increased by 1 if the byte passes.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.3.67.1.11

hwQueueStatsPassedGreenNumber

Indicates the number of pass-through green packets.
After a packet is sent downstream, the statistics of pass-through packets are increased by 1 if the packet passes.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.3.67.1.12

hwQueueStatsPassedYellowBytes

Indicates the number of pass-through bytes of yellow packets.
After a byte is sent downstream, the statistics of pass-through bytes are increased by 1 if the byte passes.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.3.67.1.13

hwQueueStatsPassedYellowNumber

Indicates the number of pass-through yellow packets.
After a packet is sent downstream, the statistics of pass-through packets are increased by 1 if the packet passes.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.3.67.1.14

hwLanBoardExtTable

table

.1.3.6.1.4.1.2011.5.14.4.1 · 1 row entry · 14 columns

Open in standard view

Extended attribute table of LAN board.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwLanBoardExtEntry entry .1.3.6.1.4.1.2011.5.14.4.1.1

Extended attribute table of LAN board.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column Syntax OID

hwLanBoardExtWorkMode

Mode of the LAN board.
Options:
1. general(1) -Indicates normal mode, in which the chip of LSW works normally.
2. ipdslam(2) -Indicatse IPDSLAM mode, the VLAN function of LSW chip is replaced by logic.
3. atmgroup(3…

Enumerationr/w

Enumerated Values:

1	general
2	ipdslam
3	atmgroup
4	ipcascade

.1.3.6.1.4.1.2011.5.14.4.1.1.1

hwLanBoardExtPriorityControl

Whether the LAN board supports the function of priority control.
Options:
1. enabled(1) -Indicates the order of priority for each connection can also be specified.
2. disabled(2) -Indicates the order of priority for e…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.14.4.1.1.2

hwLanBoardExtMulticastControl

The traffic suppression of broadcast packet, in unit of packet/second.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.4.1.1.3

hwLanBoardExtUnknowncastControl

The traffic suppression of unknown unicast, in unit of packet/second.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.4.1.1.4

hwLanBoardExtLogicLoop

LAN board loopback mode.
Options:
1. noLoopback(1) -Cancel loopback.
2. gmiiRemote(2) -GMII remote loopback.
3. utoipaRemote(3) -UTOPIA remote loopback.

Enumerationr/w

Enumerated Values:

1	noLoopback
2	gmiiRemote
3	utoipaRemote

.1.3.6.1.4.1.2011.5.14.4.1.1.5

hwLanBoardExtBroadcastControl

Traffic suppression of broadcast packet control, in unit of packet/second.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.4.1.1.6

hwLanBoardExtLowPriorityRatio

Default low priority use for filling 802.1p field in ethernet packet upstream.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.2011.5.14.4.1.1.7

hwLanBoardExtHighPriorityRatio

Default high priority use for filling 802.1p field in ethernet packet upstream.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.2011.5.14.4.1.1.8

hwLanBoardExtGMIIPauseFrameControl

Indicates if the LAN board support the function of priority control.
Options:
1. enabled(1) -The LAN board can support the function of priority control.
2. disabled(2) -The LAN board can't support the function of pri…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.14.4.1.1.9

hwLanBoardExtPriorityLevel

The level will limit for priority level, eg.level equal 2,so low priority scope is 0-2,
high priority scope is 3-7.

Integer32r/w

Constraints:
range: 0-6

.1.3.6.1.4.1.2011.5.14.4.1.1.10

hwLanBoardExtPitpStatus

PITP switch state.
Options:
1. pitpoff(1) -Indicates PITP vmode and pmode are both disable.
2. pitpvmodeenable(2) -Indicates PITP vmode enable.
3. pitppmodeenable(3) -Indicates PITP pmode enable.

Enumerationr/w

Enumerated Values:

1	pitpoff
2	pitpvmodeenable
3	pitppmodeenable

.1.3.6.1.4.1.2011.5.14.4.1.1.11

hwLanBoardExtPitpEthernetType

The ethernet protocol type of PITP PDU, the default is 0x8200.

Integer32r/w

Constraints:
range: 1536-65535

.1.3.6.1.4.1.2011.5.14.4.1.1.12

hwLanBoardExtPitpPortTagType

The port tag type of PITP PDU, the default is 0x0110.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.5.14.4.1.1.13

hwLanBoardExtPitpInfoTagType

The infomation tag type of PITP PDU, the default is 0x0111.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.5.14.4.1.1.14

hwExtSrvFlowTable

table

.1.3.6.1.4.1.2011.5.14.5.2 · 1 row entry · 42 columns

Open in standard view

Indicates the table that contains service flow configuration information. It is used to create, modify, 
delete and query service flows.
The index of this table is hwExtSrvFlowIndex.

hwExtSrvFlowEntry entry .1.3.6.1.4.1.2011.5.14.5.2.1

Indicates the table that contains service flow configuration information. It is used to create, modify,
delete and query service flows.
The index of this entry is hwExtSrvFlowIndex.

Indexes

hwExtSrvFlowIndex

Column Syntax OID

hwExtSrvFlowIndex

Indicates the service flow index, a unique value to identify a service flow.
To create a service flow, this leaf is optional. If a valid free value is specified,
the value will be the index of the service flow to be cr…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.2.1.1

hwExtSrvFlowPara1

The meaning is variable with the value of hwExtSrvFlowParaType:
If the value of hwExtSrvFlowParaType is set to 1, this leaf indicates the PVC connect ID.
If the value of hwExtSrvFlowParaType is set to 2, 4, 6, 9, 10, 11…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.2.1.2

hwExtSrvFlowPara2

The meaning is variable with the value of hwExtSrvFlowParaType:
If the value of hwExtSrvFlowParaType is set to 1, this leaf is reserved.
If the value of hwExtSrvFlowParaType is set to 2, 4, 6, 9, 10, 11, 12, 13, 14, 15,…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.2.1.3

hwExtSrvFlowPara3

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.2.1.4

hwExtSrvFlowPara4

The meaning is variable with the value of hwExtSrvFlowParaType:
If the value of hwExtSrvFlowParaType is set to 1, 2, 7, or 16, this leaf is reserved.
If the value of hwExtSrvFlowParaType is set to 3, 5, or 8, this leaf …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.2.1.5

hwExtSrvFlowPara5

The meaning is variable with the value of hwExtSrvFlowParaType:
If the value of hwExtSrvFlowParaType is set to 1, 2, 3, 5, 6, 7, 8, 15, or 16, this leaf is reserved.
If the value of hwExtSrvFlowParaType is set to 4, thi…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.2.1.6

hwExtSrvFlowParaType

The mode of create flow.
Options:
1. pvc(1) -indicates that PVC is the logical port for service flow,
applicable for xDSL ATM mode access and AIUG ATM service.
…

Enumerationr/w

Enumerated Values:

1	pvc
2	eth
3	vdsl
4	gpon
5	shdsl
6	epon
7	vcl
8	adsl
9	gponOntEth
10	eponOntEth
11	gponOntIphost
12	eponOntIphost
13	eocCnuEth
14	xponEndToEnd
15	docsis
16	fast

.1.3.6.1.4.1.2011.5.14.5.2.1.7

hwExtSrvFlowVlanid

Service VLAN ID, identifying the global VLAN for switch-oriented service flow.

Integer32r/w

Constraints:
range: -1--1
range: 1-4095

.1.3.6.1.4.1.2011.5.14.5.2.1.8

hwExtSrvFlowReceiveTrafficDescrIndex

Indicates the index of the IP traffic table (hwIpTrafficParamTable)
applying to the service flow in the outbound direction of the user
port (for terminal users, it is the Rx direction).

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.2.1.9

hwExtSrvFlowTransmitTrafficDescrIndex

Indicates the index of the IP traffic table (hwIpTrafficParamTable) applying to
the service flow in the inbound direction of the user port (for terminal users,
it is the Tx direction).

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.2.1.10

hwExtSrvFlowMultiServiceType

Indicates the traffic classification criteria on the port or logical port for user services.
Options:
1. byUserVlan(1) -indicates traffic classification by C-VLAN.
2. byEncap(2) -indicates traffic classif…

Enumerationr/w

Enumerated Values:

1	byUserVlan
2	byEncap
3	by8021p
4	byVlanEncap
5	byDoubleVlan
6	by8021pList
255	singleService

.1.3.6.1.4.1.2011.5.14.5.2.1.11

hwExtSrvFlowMultiServiceUserPara

Indicates the traffic classification parameter on the port or logical port for user service.
The meaning is variable with the value of hwExtSrvFlowMultiServiceType:
If the value of hwExtSrvFlowMultiServiceType is set t…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.2.1.12

hwExtSrvFlowAdminStatus

Indicates the administrative status of the service flow.
Options:
1. up(1) -indicates that traffic is allowed to pass.
2. down(2) -indicates that traffic is blocked.
Default: up(1)

Enumerationr/w

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.2011.5.14.5.2.1.13

hwExtSrvFlowOperStatus

Indicates the run status of the service flow.
It is read only.
Options:
1. up(1) -indicates the flow operstatus is up
2. down(2) -indicates the flow operstatus is down
3. unknown(3) -indicates the flow operstat…

Enumeration

Enumerated Values:

1	up
2	down
3	unknown

.1.3.6.1.4.1.2011.5.14.5.2.1.14

hwExtSrvFlowRowStatus

Indicates the row status. To create a service flow,
set this leaf to createAndGo(4). To delete a service flow,
set this leaf to destroy(6).
When this leaf is queried, the value is fixed to active(1).
Options:
1. act…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.5.2.1.15

hwExtSrvFlowInnerVlanId

Multi-Service up inner vlan id,
the bound of parameter is 1 to 4095.

Integer32r/w

Constraints:
range: -1--1
range: 1-4095

.1.3.6.1.4.1.2011.5.14.5.2.1.16

hwExtSrvFlowDescInfo

Indicates the description of a service flow, used for describing certain
information about a service flow, such as the telephone number or location
of the user. Note that the value may be not unique.
The default value…

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.5.14.5.2.1.17

hwExtSrvFlowTagTransform

Indicates the VLAN tag transforming mode of the service flow,
which means how the VLAN tags are changed in the upstream direction
(from user-side to the network-side) when the traffic passes through the access node.
N…

Enumerationr/w

Enumerated Values:

0	add
1	transparent
2	translate
3	translateAndAdd
4	addDouble
5	translateDouble
6	translateAndRemove
7	remove
8	removeDouble

.1.3.6.1.4.1.2011.5.14.5.2.1.18

hwExtSrvFlowSimulationServiceType

Indicates the type of a simulation service.
Options:
1. invalid(-1) -indicates a connection-oriented service flow, only for read
2. default(0) -indicates a switch-oriented service flow rather than a simulation service…

Enumerationr/w

Enumerated Values:

-1	invalid
0	default
1	aoe
2	tdmoe
3	ethernetTransparent
4	vcloe

.1.3.6.1.4.1.2011.5.14.5.2.1.19

hwExtSrvFlowRemoteDescInfo

Indicates the description of remote end of a service flow,
used for describing certain information about a service flow so-called RID.
Note that the value may be not unique.
The default value of the description string…

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.5.14.5.2.1.20

hwExtSrvFlowOutboundTrafficTableName

Indicates the name of IP traffic table (hwIpTrafficParamTable)
applying to the service flow in the outbound direction of the user port.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.14.5.2.1.21

hwExtSrvFlowInboundTrafficTableName

Indicates the name of IP traffic table (hwIpTrafficParamTable)
applying to the service flow in the inbound direction of the user port.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.14.5.2.1.22

hwExtSrvFlowRxUpc

Upc value of Rx in ATM service. This leaf supports only invalid.
Options:
1. invalid(-1) -Indicates not support this feature.
2. on(1) -Indicate Rx Upc on.
3. off(2) -Indicate Rx Upc off.

Enumerationr/w

Enumerated Values:

-1	invalid
1	on
2	off

.1.3.6.1.4.1.2011.5.14.5.2.1.23

hwExtSrvFlowTxUpc

Upc value of Tx in ATM service. This leaf supports only invalid.
Options:
1. invalid(-1) -Indicates not support this feature.
2. on(1) -Indicate Tx Upc on.
3. off(2) -Indicate Tx Upc off.

Enumerationr/w

Enumerated Values:

-1	invalid
1	on
2	off

.1.3.6.1.4.1.2011.5.14.5.2.1.24

hwExtSrvFlowNNIInnerVlanId

Integer32r/w

Constraints:
range: -1-4095

.1.3.6.1.4.1.2011.5.14.5.2.1.25

hwExtSrvFlowNNIInnerPriority

Integer32r/w

Constraints:
range: -1-7

.1.3.6.1.4.1.2011.5.14.5.2.1.26

hwExtSrvFlowBundleIndex

Indicates the service flow bundle index.
A service flow bundle is an entity including certain service flows from
one L3 access user such as residential gateway device. Traffic associated
with different service flows s…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.2.1.27

hwExtSrvFlowBundleMemberSortPara

Indicates the corresponding key value of a service flow in service flow bundle.
Now service flow bundle type must be byPbit(1), indicating that the key para is CoS.
The range of CoS is 0-7.
If a service flow is not be…

Integer32r/w

Constraints:
range: -1-65791

.1.3.6.1.4.1.2011.5.14.5.2.1.28

hwExtSrvFlowSourceType

Indicates the source end-point type of a service flow.
Options:
1. root(1) -indicates that the source end-point is a switch domain.
A switch domain for service flow indicates an S-VLAN.
2. leaf(2) -indica…

Enumerationr/w

Enumerated Values:

1	root
2	leaf

.1.3.6.1.4.1.2011.5.14.5.2.1.29

hwExtSrvFlowDestinationType

Indicates the destination end-point type of a service flow.
Options:
1. invalid(-1) -indicates invalid.
2. leaf(2) -indicates that the source end-point is a port or logical port.
A port or logical port for servi…

Enumerationr/w

Enumerated Values:

-1	invalid
2	leaf

.1.3.6.1.4.1.2011.5.14.5.2.1.30

hwExtSrvFlowSourceParaType

The value and meaning of the parameter:
Options:
1. invalid(-1) -indicates invalid.
2. eth(2) -indicates that the source end-point of the service flow is based on Ethernet port.
3. rf(17) -indicates that the …

Enumerationr/w

Enumerated Values:

-1	invalid
2	eth
17	rf
18	vxlan

.1.3.6.1.4.1.2011.5.14.5.2.1.31

hwExtSrvFlowSourcePara1

The meaning is variable with the value of hwExtSrvFlowSourceParaType:
If the value of hwExtSrvFlowSourceParaType is set to 2, this leaf indicates the shelf ID.
If the value of hwExtSrvFlowSourceParaType is -1 and the …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.2.1.32

hwExtSrvFlowSourcePara2

The meaning is variable with the value of hwExtSrvFlowSourceParaType:
If the value of hwExtSrvFlowSourceParaType is set to 2, this leaf indicates the slot ID.
If the value of hwExtSrvFlowSourceParaType is -1 and the c…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.2.1.33

hwExtSrvFlowSourcePara3

The meaning is variable with the value of hwExtSrvFlowSourceParaType:
If the value of hwExtSrvFlowSourceParaType is set to 2, this leaf indicates the port ID.
If the value of hwExtSrvFlowSourceParaType is -1 and the c…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.2.1.34

hwExtSrvFlowSourcePara4

The meaning is variable with the value of hwExtSrvFlowSourceParaType:
If the value of hwExtSrvFlowSourceParaType is set to 2, this leaf is reserved and the returned value is -1.
If a service flow is not connection-orien…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.2.1.35

hwExtSrvFlowSourcePara5

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.2.1.36

hwExtSrvFlowSourceMultiServiceType

Indicates the traffic classification criteria on the port or logical port.
For the source end-point.
Options:
1. invalid(-1) -invalid
2. byUserVlan(1) -indicates traffic classification by outer VLAN ID
3. byDoubl…

Enumerationr/w

Enumerated Values:

-1	invalid
1	byUserVlan
5	byDoubleVlan
255	singleService

.1.3.6.1.4.1.2011.5.14.5.2.1.37

hwExtSrvFlowSourceMultiServiceUserPara

The flow classification parameter on the port or logical port for user service.
The meaning is variable with the value of hwExtSrvFlowSourceMultiServiceType:
If the hwExtSrvFlowSourceMultiServiceType is byUserVlan(1), …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.2.1.38

hwExtSrvFlowSourceInnerVlanId

Multi-Service up inner vlan id, the bound of parameter is 1 to 4095.
If a service flow is not connection-oriented, or the value of this leaf is not set,
the returned value of this leaf is -1, which indicates invalid.

Integer32r/w

Constraints:
range: -1--1
range: 1-4095

.1.3.6.1.4.1.2011.5.14.5.2.1.39

hwExtSrvFlowOntPortListMask

This leaf is required when the service flow is created on a specified ONT port.
The 8-character string maps eight ports. The value 1 of a character indicates that the corresponding port is valid,
and the value 0 of a …

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.14.5.2.1.40

hwExtSrvFlowOntPortType

Indicates the ONT port type.
Options:
1. eth(1) -indicates the eth port
2. iphost(2) -indicates the VOIP port
3. invalid(255) -indicates this parameter is invalid
During the service flow creation on a speci…

Enumerationr/w

Enumerated Values:

1	eth
2	iphost
255	invalid

.1.3.6.1.4.1.2011.5.14.5.2.1.41

hwExtSrvFlowStatPerSwitch

Indicates the switch of service-port statistics performance.
Options:
1. enable(1) -indicates the switch of service-port statistics performance is enable
2. disable(2) -indicates the switch of service-port sta…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.5.14.5.2.1.42

hwFlowFluxStatisticTable

table

.1.3.6.1.4.1.2011.5.14.5.3 · 1 row entry · 26 columns

Open in standard view

Indicates the table that contains statistics per service flow for traffic received and transmitted.
The index of this table is hwFlowID.

hwFlowFluxStatisticEntry entry .1.3.6.1.4.1.2011.5.14.5.3.1

Indicates the table that contains statistics per service flow for traffic received and transmitted.
The index of this entry is hwFlowID.

Indexes

hwFlowID

Column Syntax OID

hwFlowID

This leaf is the same as hwExtSrvFlowIndex, which indicates the service flow index, a unique
value to identify a service flow.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.3.1.1

hwFlowFluxUpCells

Indicates the statistics of upstream cells of the service flow. It is valid for ATM access.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.5.3.1.2

hwFlowFluxUpPackets

Indicates the statistics of upstream packets of the service flow.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.3

hwFlowFluxDownCells

Indicates the statistics of downstream cells of the service flow. It is valid for ATM access.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.5.3.1.4

hwFlowFluxDownPackets

Indicates the statistics of downstream packets of the service flow.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.5

hwFlowFluxAdminStatus

Used to reset the statistics only. The value must be set to reset(0).
Options:
1. reset(0) -reset the statistics
2. invalid(-1) -invalid

Enumerationr/w

Enumerated Values:

-1	invalid
0	reset

.1.3.6.1.4.1.2011.5.14.5.3.1.6

hwFlowFluxUpBytes

Indicates the statistics of upstream bytes of the service flow.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.7

hwFlowFluxDownBytes

Indicates the statistics of downstream bytes of the service flow.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.8

hwFlowFluxUpDiscardPackets

Indicates the statistics of upstream discarded packets of the service flow.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.9

hwFlowFluxDnDiscardPackets

Indicates the statistics of downstream discarded packets of the service flow.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.10

hwFlowFluxUpMCCells

Indicates the flux of upstream multicast cells of the service flow.(cells/s)

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.11

hwFlowFluxUpMCPackets

Indicates the flux of upstream multicast packets of the service flow.(packets/s)

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.12

hwFlowFluxDownMCCells

Indicates the flux of downstream multicast cells of the service flow.(cells/s)

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.13

hwFlowFluxDownMCPackets

Indicates the flux of downstream multicast packets of the service flow.(packets/s)

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.14

hwFlowFluxSourceUpBytes

Indicates the statistics of source upstream bytes of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.15

hwFlowFluxSourceUpPackets

Indicates the statistics of source upstream packets of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.16

hwFlowFluxSourceUpDiscardPackets

Indicates the statistics of source upstream discarded packets of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.17

hwFlowFluxSourceDownBytes

Indicates the statistics of source downstream bytes of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.18

hwFlowFluxSourceDownPackets

Indicates the statistics of source downstream packets of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.19

hwFlowFluxSourceDownDiscardPackets

Indicates the statistics of source downstream discarded packets of the service flow.Only
connection-oriented flow supports this leaf, others return 0xff

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.20

hwFlowFluxDestinationUpBytes

Indicates the statistics of destination upstream bytes of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.21

hwFlowFluxDestinationUpPackets

Indicates the statistics of destination upstream packets of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.22

hwFlowFluxDestinationUpDiscardPackets

Indicates the statistics of destination upstream discarded packets of the service flow.Only
connection-oriented flow supports this leaf, others return 0xff

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.23

hwFlowFluxDestinationDownBytes

Indicates the statistics of destination downstream bytes of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.24

hwFlowFluxDestinationDownPackets

Indicates the statistics of destination downstream packets of the service flow.Only connection-oriented
flow supports this leaf, others return 0xff

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.25

hwFlowFluxDestinationDownDiscardPackets

Indicates the statistics of destination downstream discarded packets of the service flow.Only
connection-oriented flow supports this leaf, others return 0xff

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.3.1.26

hwFlowBindChannelTable

table

.1.3.6.1.4.1.2011.5.14.5.4 · 1 row entry · 1 columns

Open in standard view

Indicates the table that contains information about the binding relationship between the service 
flow and the latency channel.
The index of this table is hwFlowID.

hwFlowBindChannelEntry entry .1.3.6.1.4.1.2011.5.14.5.4.1

Indicates the table that contains information about the binding relationship between the service
flow and the latency channel.
The index of this entry is hwFlowID.

Indexes

hwFlowID

Column	Syntax	OID
hwFlowLatencyChannel Indicates the VDSL2 latency channel number. For QoS purpose, the VDSL2 line may support dual-latency channel, and the number may be 1 or 2. The default latency channel number bound to the service flow is 1.	Integer32r/w Constraints: `range: 1-2`	`.1.3.6.1.4.1.2011.5.14.5.4.1.1`

hwFlowIndexQueryTable

table

.1.3.6.1.4.1.2011.5.14.5.5 · 1 row entry · 7 columns

Open in standard view

Indicates the table that contains service flow index query information. It is used to query the
service flow index according to the port or logical port and traffic classification information.
The indexes of this table are ifIndex, hwFlowBridgePortType, hwFlowPortExtPara1, hwFlowPortExtPara2,
hwFlowPortExtPara3, hwFlowMulitiServiceType and hwFlowMulitiServicePara.

hwFlowIndexQueryEntry entry .1.3.6.1.4.1.2011.5.14.5.5.1

Indexes

IF-MIBifIndex hwFlowBridgePortType hwFlowPortExtPara1 hwFlowPortExtPara2 hwFlowPortExtPara3 hwFlowMulitiServiceType hwFlowMulitiServicePara

Column Syntax OID

hwFlowBridgePortType

Indicates the type of the physical or logical bridge port.
Options:
1. vcPort(1) -indicates a VC port to be a bridge port, capable for ATM mode access.
2. ethernetPtm(2) -indicates an Ethernet port or PTM mode xDSL…

Enumeration

Enumerated Values:

1	vcPort
2	ethernetPtm
3	gemPort
4	ontId

.1.3.6.1.4.1.2011.5.14.5.5.1.1

hwFlowPortExtPara1

The meaning is variable with the value of hwFlowBridgePortType:
If the value of hwFlowBridgePortType is set to vcPort(1): this leaf indicates the VPI.
If the value of hwExtSrvFlowParaType is set to ethernetPtm(2): this …

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.5.1.2

hwFlowPortExtPara2

The meaning is variable with the value of hwFlowBridgePortType:
If the value of hwFlowBridgePortType is set to vcPort(1), this leaf indicates the VCI.
If the value of hwExtSrvFlowParaType is set to ethernetPtm(2), this …

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.5.1.3

hwFlowPortExtPara3

Indicates the reserved parameter to describe a bridge port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.5.1.4

hwFlowMulitiServiceType

This leaf is the same as hwExtSrvFlowMultiServiceType,
which indicates the traffic classification criteria on the port or logical port.
For details, see the description of hwExtSrvFlowMultiServiceType.
Options:
1. byU…

Enumeration

Enumerated Values:

1	byUserVlan
2	byEncap
3	by8021p
4	byVlanEncap
5	byDoubleVlan
6	by8021pList
255	singleService

.1.3.6.1.4.1.2011.5.14.5.5.1.5

hwFlowMulitiServicePara

This leaf is the same as hwExtSrvFlowMultiServiceUserPara,
and the meaning is variable with the value of hwFlowMulitiServiceType.
For details, see the description of hwExtSrvFlowMultiServiceUserPara.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.5.1.6

hwFlowIndex

Indicates the service flow index, a unique value to identify a service flow.
In this table, giving the information about the port and traffic classification parameters,
the flow index can be obtained through hwFlowInde…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.5.1.7

hwSrvFlowBundleTable

table

.1.3.6.1.4.1.2011.5.14.5.6 · 1 row entry · 3 columns

Open in standard view

Indicates the table that contains service flow bundle configuration information. It is used to
create, delete and query service flow bundles.
The index of this table is hwSrvFlowBundleIndex.

hwSrvFlowBundleEntry entry .1.3.6.1.4.1.2011.5.14.5.6.1

Indicates the table that contains service flow bundle configuration information. It is used to
create, delete and query service flow bundles.
The index of this entry is hwSrvFlowBundleIndex.

Indexes

hwSrvFlowBundleIndex

Column Syntax OID

hwSrvFlowBundleIndex

Indicates the service flow bundle index,
a unique value to identify a service flow bundle.If -1 is specified,
an index will be allocated automatically for the service flow bundle.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.5.6.1.1

hwSrvFlowBundleType

Indicates the type of a service flow bundle.
Currently, only one type is supported, that is, byPbit(1),
which indicates that the service flow bundle is for L3 access,
and that the service flows are classified for 802…

Enumerationr/w

Enumerated Values:

byPbit

.1.3.6.1.4.1.2011.5.14.5.6.1.2

hwSrvFlowBundleRowStatus

Indicates the row status. To create a service flow bundle,
set hwSrvFlowBundleRowStatus to createAndGo(4).
To delete a service flow bundle, set hwSrvFlowBundleRowStatus to destroy(6).
Options:
1. active(1) -indi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.5.6.1.3

hwSrvFlowBundleQueryTable

table

.1.3.6.1.4.1.2011.5.14.5.7 · 1 row entry · 3 columns

Open in standard view

Indicates the table that contains service flow bundle query information. It is
used to query service flow bundles.
The indexes of this table are hwSrvFlowBundleQueryIndex and hwSrvFlowIndex.

hwSrvFlowBundleQueryEntry entry .1.3.6.1.4.1.2011.5.14.5.7.1

Indicates the table that contains service flow bundle query information. It is
used to query service flow bundles.
The indexes of this entry are hwSrvFlowBundleQueryIndex and hwSrvFlowIndex.

Indexes

hwSrvFlowBundleQueryIndex hwSrvFlowIndex

Column	Syntax	OID
hwSrvFlowBundleQueryIndex Indicates the service flow bundle index, a unique value to identify a service flow bundle.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.5.7.1.1`
hwSrvFlowIndex Indicates the service flow index, a unique value to identify a service flow.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.5.7.1.2`
hwSrvFlowBundleMemberSortPara Indicates the corresponding key value of a service flow in service flow bundle. Currently, the service flow bundle type must be byPbit(1), and hwSrvFlowBundleMemberSortPara indicates the CoS value. If the high 16 bits …	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.5.7.1.3`

hwFlowIndexQueryForPPPoESmltTable

table

.1.3.6.1.4.1.2011.5.14.5.8 · 1 row entry · 2 columns

Open in standard view

Indicates the service flow index query information for PPPoE simulation. It is used to query the
service flow index according to the ifIndex and ONU ID. It supports the xDSL ports and the xPON ports only.
The indexes of this table are ifIndex and hwFlowIndexQueryForPPPoESmltOnuId.

hwFlowIndexQueryForPPPoESmltEntry entry .1.3.6.1.4.1.2011.5.14.5.8.1

Indexes

IF-MIBifIndex hwFlowIndexQueryForPPPoESmltOnuId

Column	Syntax	OID
hwFlowIndexQueryForPPPoESmltOnuId Indicates the ONU ID of the ONU in the PPPoE simulation scenario. This leaf is valid when the ifIndex indicates that the port type is xDSL. This leaf should be set to -1 when the service flow is queried according to if…	Integer32 Constraints: `range: -1-255`	`.1.3.6.1.4.1.2011.5.14.5.8.1.1`
hwFlowIndexList Indicates the list of service flow indexes, each index in the list identifies a service flow uniquely. In this table, if given the ifIndex and ONU ID, the active PPPoE service flow indexes created on the corresponding …	OctetString Constraints: `range: 0-1028`	`.1.3.6.1.4.1.2011.5.14.5.8.1.2`

hwSrvPortExtStatTable

table

.1.3.6.1.4.1.2011.5.14.5.9 · 1 row entry · 74 columns

Open in standard view

Used for extended packet statistics collection based on service flows.
Indicates the table that contains service flow configuration information. It is used to create, modify,
delete and query service flows.
The index of this table is hwExtSrvFlowIndex.

hwSrvPortExtStatEntry entry .1.3.6.1.4.1.2011.5.14.5.9.1

Indexes

hwExtSrvFlowIndex

Column Syntax OID

hwSrvPortExtStatRowStatus

Starts or stops extended statistics collection of a specified service flow.
Options:
1. active(1) - when this leaf is queried, the value is fixed to active(1)
2. createAndGo(4) - deliver a extend traffic …

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.5.9.1.1

hwSrvPortExtStatCountClear

Clears extended statistics of a specified service flow.
This node does not need to be specified during the start of extended statistics
collection for a service flow.
Options:
1.cleared(1) - reset the extend traffic …

Enumerationr/w

Enumerated Values:

1	cleared
2	nouse

.1.3.6.1.4.1.2011.5.14.5.9.1.2

hwSrvPortExtStatTimeoutDuration

For a service flow that supports long-duration (exceeding 1440 minutes) extended statistics collection,
this node is optional during the start of statistics collection.
However, when a service flow does not support lo…

Integer32r/w

Constraints:
range: 1-1440

.1.3.6.1.4.1.2011.5.14.5.9.1.3

hwSrvPortExtStatRunningStatus

Indicates the current status of extended statistics collection of a specified service flow.
This node has two enumerated values: running and timeout.
Options:
1.running(1) -indicate the extend traffic statistic to the …

Enumeration

Enumerated Values:

1	running
2	timeout

.1.3.6.1.4.1.2011.5.14.5.9.1.4

hwSrvPortExtStatUsBytes

Indicates the number of upstream bytes of a specified service flow.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.5

hwSrvPortExtStatUsPackets

Indicates the number of upstream packets of a specified service flow.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.6

hwSrvPortExtStatUsDiscardPackets

Indicates the number of discarded upstream packets of a specified service flow.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.7

hwSrvPortExtStatDsBytes

Indicates the number of downstream bytes of a specified service flow.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.8

hwSrvPortExtStatDsPackets

Indicates the number of downstream packets of a specified service flow.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.9

hwSrvPortExtStatDsDiscardPackets

Indicates the number of discarded downstream packets of a specified service flow.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.10

hwSrvPortExtStatUsPacketsForPriority0

Indicates the number of upstream packets with flow priority 0.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.11

hwSrvPortExtStatUsPacketsForPriority1

Indicates the number of upstream packets with flow priority 1.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.12

hwSrvPortExtStatUsPacketsForPriority2

Indicates the number of upstream packets with flow priority 2.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.13

hwSrvPortExtStatUsPacketsForPriority3

Indicates the number of upstream packets with flow priority 3.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.14

hwSrvPortExtStatUsPacketsForPriority4

Indicates the number of upstream packets with flow priority 4.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.15

hwSrvPortExtStatUsPacketsForPriority5

Indicates the number of upstream packets with flow priority 5.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.16

hwSrvPortExtStatUsPacketsForPriority6

Indicates the number of upstream packets with flow priority 6.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.17

hwSrvPortExtStatUsPacketsForPriority7

Indicates the number of upstream packets with flow priority 7.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.18

hwSrvPortExtStatUsDiscardPacketsForPriority0

Indicates the number of discarded upstream packets with flow priority 0.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.19

hwSrvPortExtStatUsDiscardPacketsForPriority1

Indicates the number of discarded upstream packets with flow priority 1.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.20

hwSrvPortExtStatUsDiscardPacketsForPriority2

Indicates the number of discarded upstream packets with flow priority 2.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.21

hwSrvPortExtStatUsDiscardPacketsForPriority3

Indicates the number of discarded upstream packets with flow priority 3.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.22

hwSrvPortExtStatUsDiscardPacketsForPriority4

Indicates the number of discarded upstream packets with flow priority 4.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.23

hwSrvPortExtStatUsDiscardPacketsForPriority5

Indicates the number of discarded upstream packets with flow priority 5.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.24

hwSrvPortExtStatUsDiscardPacketsForPriority6

Indicates the number of discarded upstream packets with flow priority 6.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.25

hwSrvPortExtStatUsDiscardPacketsForPriority7

Indicates the number of discarded upstream packets with flow priority 7.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.26

hwSrvPortExtStatDsPacketsForPriority0

Indicates the number of downstream packets with flow priority 0.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.27

hwSrvPortExtStatDsPacketsForPriority1

Indicates the number of downstream packets with flow priority 1.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.28

hwSrvPortExtStatDsPacketsForPriority2

Indicates the number of downstream packets with flow priority 2.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.29

hwSrvPortExtStatDsPacketsForPriority3

Indicates the number of downstream packets with flow priority 3.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.30

hwSrvPortExtStatDsPacketsForPriority4

Indicates the number of downstream packets with flow priority 4.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.31

hwSrvPortExtStatDsPacketsForPriority5

Indicates the number of downstream packets with flow priority 5.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.32

hwSrvPortExtStatDsPacketsForPriority6

Indicates the number of downstream packets with flow priority 6.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.33

hwSrvPortExtStatDsPacketsForPriority7

Indicates the number of downstream packets with flow priority 7.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.34

hwSrvPortExtStatUnknownPriorityDownstreamPackets

Indicates the number of downstream packets with an unknown flow priority.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.35

hwSrvPortExtStatDsDiscardPacketsForPriority0

Indicates the number of discarded downstream packets with flow priority 0.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.36

hwSrvPortExtStatDsDiscardPacketsForPriority1

Indicates the number of discarded downstream packets with flow priority 1.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.37

hwSrvPortExtStatDsDiscardPacketsForPriority2

Indicates the number of discarded downstream packets with flow priority 2.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.38

hwSrvPortExtStatDsDiscardPacketsForPriority3

Indicates the number of discarded downstream packets with flow priority 3.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.39

hwSrvPortExtStatDsDiscardPacketsForPriority4

Indicates the number of discarded downstream packets with flow priority 4.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.40

hwSrvPortExtStatDsDiscardPacketsForPriority5

Indicates the number of discarded downstream packets with flow priority 5.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.41

hwSrvPortExtStatDsDiscardPacketsForPriority6

Indicates the number of discarded downstream packets with flow priority 6.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.42

hwSrvPortExtStatDsDiscardPacketsForPriority7

Indicates the number of discarded downstream packets with flow priority 7.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.43

hwSrvPortExtStatUnknownPriorityDownstreamDiscardPackets

Indicates the number of discarded downstream packets with an unknown flow priority.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.44

hwSrvPortExtStatDsDiscardPacketsForUnicast

Indicates the number of known unicast packets discarded in the downstream direction.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.45

hwSrvPortExtStatDsDiscardPacketsForUnknownUnicast

Indicates the number of unknown unicast packets discarded in the downstream direction.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.46

hwSrvPortExtStatDsDiscardPacketsForMulticast

Indicates the number of known multicast packets discarded in the downstream direction.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.47

hwSrvPortExtStatDsDiscardPacketsForUnknownMulticast

Indicates the number of unknown multicast packets discarded in the downstream direction.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.48

hwSrvPortExtStatUsDiscardedPacketsByVlanCheck

Indicates the number of upstream packets discarded due to a VLAN check failure.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because their VLANs are different from t…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.49

hwSrvPortExtStatUsDiscardedPacketsByExpectedPppoeEncapsulation

Indicates the number of upstream packets discarded due to unexpected PPPoE encapsulation.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because they do not support th…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.50

hwSrvPortExtStatUsDiscardedPacketsByExpectedIpoeEncapsulation

Indicates the number of upstream packets discarded due to unexpected IPoE encapsulation.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because they do not support the…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.51

hwSrvPortExtStatUsDiscardedPacketsByExpectedPppoaEncapsulation

Indicates the number of upstream packets discarded due to unexpected PPPoA encapsulation.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because they do not support th…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.52

hwSrvPortExtStatUsDiscardedPacketsByExpectedIpoaEncapsulation

Indicates the number of upstream packets discarded due to unexpected IPoA encapsulation.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because they do not support the…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.53

hwSrvPortExtStatUsDiscardedPacketsByIPSpoofing

Indicates the number of upstream packets discarded due to anti-IP spoofing.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because their source IP addresses are differ…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.54

hwSrvPortExtStatUsDiscardedPacketsBySourceMacAddressFilter

Indicates the number of upstream packets discarded due to source MAC address filtering.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because their source MAC address…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.55

hwSrvPortExtStatUsDiscardedPacketsByDestinationMacAddressFilter

Indicates the number of upstream packets discarded due to destination MAC address filtering.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because their destination M…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.56

hwSrvPortExtStatUsDiscardedPacketsByHashConflict

Indicates the number of upstream packets discarded due to a hash conflict.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.57

hwSrvPortExtStatUsDiscardedPacketsByOverMacLimitation

Indicates the number of upstream packets discarded due to threshold-crossing of MAC address quantity.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because the number…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.58

hwSrvPortExtStatUsDiscardedPacketsByVmacCheck

Indicates the number of upstream packets discarded due to a VMAC check failure.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because of VMAC check inconsistency.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.59

hwSrvPortExtStatUsDiscardedPacketsByCar

Indicates the number of upstream packets discarded due to CAR.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.60

hwSrvPortExtStatUsdiscardedPacketsMacSpoofing

Indicates the number of upstream packets discarded due to anti-MAC spoofing.
Specifically, this node is used to collect the statistics of upstream packets
that are discarded because their source MAC addresses are diff…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.61

hwSrvPortExtStatDsDiscardedPacketsByUnknownUnicastSuppression

Indicates the number of downstream packets discarded due to unknown unicast suppression.
Specifically, this node is used to collect the statistics of downstream packets that are discarded
because the system implements…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.62

hwSrvPortExtStatDsDiscardedPacketsByUnknownBroadcastSuppression

Indicates the number of downstream packets discarded due to unknown broadcast suppression.
Specifically, this node is used to collect the statistics of downstream packets
that are discarded because the system implemen…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.63

hwSrvPortExtStatDsDiscardedPacketsByUnknownMulticastSuppression

Indicates the number of downstream packets discarded due to unknown multicast suppression.
Specifically, this node is used to collect the statistics of downstream packets
that are discarded because the system implemen…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.64

hwSrvPortExtStatDsDiscardedPacketsByVLANCheck

Indicates the number of downstream packets discarded due to a VLAN check failure.
Specifically, this node is used to collect the statistics of downstream packets
that are discarded because their VLANs are different th…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.65

hwSrvPortExtStatDsDiscardedPacketsByExpectedPppoeEncapsulation

Indicates the number of downstream packets discarded due to unexpected PPPoE encapsulation.
Specifically, this node is used to collect the statistics of downstream packets
that are discarded because they do not suppor…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.66

hwSrvPortExtStatDsDiscardedPacketsByExpectedIpoeEncapsulation

Indicates the number of downstream packets discarded due to unexpected IPoE encapsulation.
Specifically, this node is used to collect the statistics of downstream packets
that are discarded because they do not support…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.67

hwSrvPortExtStatDsDiscardedPacketsByUnexpectedPppoaEncapsulation

Indicates the number of downstream packets discarded due to unexpected PPPoA encapsulation.
Specifically, this node is used to collect the statistics of downstream packets
that are discarded because they do not suppor…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.68

hwSrvPortExtStatDsDiscardedPacketsByEncapsulationLengthError

Indicates the number of downstream packets discarded due to length errors during encapsulation conversion.
Specifically, this node is used to collect the statistics of downstream packets
that are discarded because the…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.69

hwSrvPortExtStatDsDiscardedPacketsByVmacCheck

Indicates the number of downstream packets discarded due to a VMAC check failure.
Specifically, this node is used to collect the statistics of downstream packets
that are discarded because of VMAC check inconsistency.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.70

hwSrvPortExtStatDsDiscardedPacketsByCar

Indicates the number of downstream packets discarded due to CAR.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.71

hwSrvPortExtStatDsDiscardedPacketsByQueue

Indicates the number of downstream packets discarded due to queue overflow.
This node is used to collect the statistics of downstream packets that are discarded
because they fail to enter queues.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.72

hwSrvPortExtStatUsDiscardedPacketsByL3Forward

Indicates the number of upstream packets discarded due to L3 Forward.
This node is used to collect the statistics of upstream packets that are discarded
by L3 forward.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.73

hwSrvPortExtStatDsDiscardedPacketsByL3Forward

Indicates the number of downstream packets discarded due to L3 Forward.
This node is used to collect the statistics of downstream packets that are discarded
by L3 forward.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.5.9.1.74

hwStaticMacTable

table

.1.3.6.1.4.1.2011.5.14.11 · 1 row entry · 9 columns

Open in standard view

Describes static MAC addresses and used for setting, querying, and deleting static MAC addresses. 
The index of this table is hwStaticMacIndex, a free index can be obtained through hwStaticMacNextFreeIndex.

hwStaticMacEntry entry .1.3.6.1.4.1.2011.5.14.11.1

Describes static MAC addresses and used for setting, querying, and deleting static MAC addresses.
The index of this entry is hwStaticMacIndex, a free index can be obtained through hwStaticMacNextFreeIndex.

Indexes

hwStaticMacIndex

Column Syntax OID

hwStaticMacIndex

Indicates the index of a static MAC address. The index is used by the software for recording an entry.
The MAC address corresponding to the index must be null, and a free index can be obtained for the MAC
address thro…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.11.1.1

hwStaticMacIfIndex

Indicates the port index for configuring a static MAC address on a specified port.
The index uniquely identifies a port.
The value and algorithm of this index are the same as those of the ifIndex.
If you query the MAC …

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.11.1.2

hwStaticMacVlanID

Indicates the VLAN to which a static MAC address belongs.
Range: 1-4093

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.2011.5.14.11.1.3

hwStaticMacVPI

Indicates the VPI value among the ATM/xDSL service port parameters.
The following four leaves determine a single-service service port:
hwStaticMacIfIndex, hwStaticMacVlanID, hwStaticMacVPI, and hwStaticMacVCI.
hwStatic…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.11.1.4

hwStaticMacVCI

Indicates the VCI value among the ATM/xDSL service port parameters.
The following four leaves determine a single-service service port:
hwStaticMacIfIndex, hwStaticMacVlanID, hwStaticMacVPI, and hwStaticMacVCI.
hwStatic…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.11.1.5

hwStaticMacFlowID

Indicates the index of a service port.
The service port must be already created through hwExtSrvFlowTable.
During query, -1 indicates invalid.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.11.1.6

hwStaticMacMacAddr

Indicates the MAC address that needs to be configured as a static MAC address.
The following is an example of the input format of the MAC address:
If the MAC address is 00e0-fc11-0000, enter # 0x00 0xe0 0xfc 0x11 0x00…

OctetStringr/w

Constraints:
range: 6-17

.1.3.6.1.4.1.2011.5.14.11.1.7

hwStaticMacRowStatus

Indicates the row status, used for creating or deleting a static MAC address.
Only options createAndGo(4) and destroy(6) are supported.
Pay attention to the following points when creating a static MAC address:
1. To se…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.11.1.8

hwStaticMacPwIndex

Indicates the PW index value for configuring a static MAC address on a special PW.
The index uniquely identifies a PW.
The default value is 0xFFFFFFFF,which indicates it's an invalid value.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.11.1.9

hwPortIsolateTable

table

.1.3.6.1.4.1.2011.5.14.13.1 · 1 row entry · 8 columns

Open in standard view

Indicates the Ethernet port isolation table.
The indexes of this table are hwFrameIsolateIndex, hwSlotIsolateIndex and hwPortIsolateIndex.

hwPortIsolateEntry entry .1.3.6.1.4.1.2011.5.14.13.1.1

Indicates the Ethernet port isolation table.
The indexes of this entry are hwFrameIsolateIndex, hwSlotIsolateIndex and hwPortIsolateIndex.

Indexes

hwFrameIsolateIndex hwSlotIsolateIndex hwPortIsolateIndex

Column Syntax OID

hwFrameIsolateIndex

Index of this table.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.5.14.13.1.1.1

hwSlotIsolateIndex

Index of this table.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.5.14.13.1.1.2

hwPortIsolateIndex

Index of this table.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.5.14.13.1.1.3

hwIsolateRowstatus

Indicates the row status. This leaf supports only the query operation;
in the query operation, the returned value of this leaf is always active(1).
Options:
1. active(1) -indicates the query operation

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.13.1.1.4

hwIsolateStatus

Indicates the port isolation status. The default value of an upstream port
is disable(2). The default value of a downstream port is enable(1).
Options:
1. enable(1) -indicates the port isolation status is enable
2. d…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.5.14.13.1.1.5

hwIsolateBroadcast

Enable or disable the system isolation switch of broadcast frame between
different down link ports in the same smart vlan.Default state is disable.
Options:
1. enabled(1) -Indicates the broadcast frame isolation statu…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.14.13.1.1.6

hwIsolateUnknownMulticast

Enable or disable the system isolation switch of unknown multicast frame between
different down link ports in the same smart vlan.Default state is disable.
Options:
1. enabled(1) -Indicates the unknown multicast frame…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.14.13.1.1.7

hwIsolateUnknownUnicast

Enable or disable the system isolation switch of unknown unicast frame between
different down link ports in the same smart vlan.Default state is disable.
Options:
1. enabled(1) -Indicates the unknown unicast frame iso…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.14.13.1.1.8

hwPortIsolateGroupTable

table

.1.3.6.1.4.1.2011.5.14.13.2 · 1 row entry · 3 columns

Open in standard view

The port isolation group.
The indexes of this table are hwPortIsolateGroupIndex and hwPortIsolateGroupIfIndex.

hwPortIsolateGroupEntry entry .1.3.6.1.4.1.2011.5.14.13.2.1

The port isolation group.
The indexes of this entry are hwPortIsolateGroupIndex and hwPortIsolateGroupIfIndex.

Indexes

hwPortIsolateGroupIndex hwPortIsolateGroupIfIndex

Column Syntax OID

hwPortIsolateGroupIndex

this Para indicates the isolation group ID

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.5.14.13.2.1.1

hwPortIsolateGroupIfIndex

this Para indicates the Fram/Slot/Port

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.13.2.1.2

hwPortIsolateGroupRowStatus

This object is used to add, delete the port of isolate
group in this table. To add a new port into group, this
object should set to 'createAndGo'. To delete a port from
group,this object is is initially set to 'destroy'…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.13.2.1.3

hwDynamicMacConfigTable

table

.1.3.6.1.4.1.2011.5.14.14.1 · 1 row entry · 1 columns

Open in standard view

Dynamic MAC address config property.
The index of this table is ifIndex.

hwDynamicMacConfigEntry entry .1.3.6.1.4.1.2011.5.14.14.1.1

Dynamic MAC address config property.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwPortMaxDynamicMacCount The MAX number of dynamic mac address can be learned per port.	Unsigned32r/w Constraints: `range: 0-16384`	`.1.3.6.1.4.1.2011.5.14.14.1.1.2`

hwDynamicMacTable

table

.1.3.6.1.4.1.2011.5.14.14.2 · 1 row entry · 5 columns

Open in standard view

Indicates the Dynamic MAC address in system. 
The indexes of this table are ifIndex and hwDynamicMacIndex.

hwDynamicMacEntry entry .1.3.6.1.4.1.2011.5.14.14.2.1

Indicates the Dynamic MAC address in system.
The indexes of this entry are ifIndex and hwDynamicMacIndex.

Indexes

IF-MIBifIndex hwDynamicMacIndex

Column Syntax OID

hwDynamicMacIndex

The dynamic MAC address index.

Unsigned32

Constraints:
range: 0-16384

.1.3.6.1.4.1.2011.5.14.14.2.1.1

hwDynamicMacVlanId

The VLAN of dynamic MAC address.

Unsigned32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.2011.5.14.14.2.1.2

hwDynamicMacAddr

The mac address, and its format is XX-XX-XX-XX-XX-XX.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.2011.5.14.14.2.1.3

hwTimeTillExpired

The time of the MAC address till expired.

Unsigned32

Constraints:
range: 10-1000000

.1.3.6.1.4.1.2011.5.14.14.2.1.4

hwDynamicMacRowStatus

The variable is used to decide what operation will be done
when set from SNMP. The supported operations is only destroy.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.14.2.1.5

hwEthHistoryStatsTable

table

.1.3.6.1.4.1.2011.5.14.16.1 · 1 row entry · 58 columns

Open in standard view

Ether History Statistic.
The indexes of this table are ifIndex, hwEthStatsIntervalType and hwEthStatsIntervalNum.

hwEthHistoryStatsEntry entry .1.3.6.1.4.1.2011.5.14.16.1.1

Ether History Statistic.
The indexes of this entry are ifIndex, hwEthStatsIntervalType and hwEthStatsIntervalNum.

Indexes

IF-MIBifIndex hwEthStatsIntervalType hwEthStatsIntervalNum

Column Syntax OID

hwEthStatsIntervalType

The type of Ether History Statistic.
Options:
1. intervaltime15min(0) -15 minutes
2. intervaltime24h(1) -24 hours
3. everbefore(2) -everbefore

Enumeration

Enumerated Values:

0	intervaltime15min
1	intervaltime24h
2	everbefore

.1.3.6.1.4.1.2011.5.14.16.1.1.1

hwEthStatsIntervalNum

The interval number of Ether History Statistic. When hwEthStatsIntervalType is intervaltime15min,
0 represents current 15 minutes interval, and when hwEthStatsIntervalType is intervaltime24h,
0 represents current 24 h…

Integer32

Constraints:
range: 0-96

.1.3.6.1.4.1.2011.5.14.16.1.1.2

hwEthStatsRxDropEvents

Number of received discarded packets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.3

hwEthStatsRxOctets

Number of received octets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.4

hwEthStatsRxPkts

Number of received frames.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.5

hwEthStatsRxBroadcastPkts

Number of received broadcast frames.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.6

hwEthStatsRxMulticastPkts

Number of received multicast frames.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.7

hwEthStatsRxPauseFramePkts

Number of received pause frames.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.8

hwEthStatsRxCRCAlignErrors

Number of CRC error frames.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.9

hwEthStatsRxUndersizePkts

Number of undersized frames
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.10

hwEthStatsRxOversizePkts

Number of oversized frames.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.11

hwEthStatsRxFragments

Number of fragment frames.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.12

hwEthStatsRxJabbers

Number of Jabber frames.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.13

hwEthStatsRxCollisions

Number of collision frames.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.14

hwEthStatsRxPkts64Octets

Number of packets(64 octets in length).
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.15

hwEthStatsRxPkts65to127Octets

Number of packets(65~127 octets in length)
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.16

hwEthStatsRxPkts128to255Octets

Number of packets(128~255 octets in length).
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.17

hwEthStatsRxPkts256to511Octets

Number of packets(256~511 octets in length).
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.18

hwEthStatsRxPkts512to1023Octets

Number of packets(512~1023 octets in length).
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.19

hwEthStatsRxPkts1024to1518Octets

Number of packets(1024~1518 octets in length).
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.20

hwEthStatsRxPkts1519to2047Octets

Number of packets(1519~2047 octets in length).
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.21

hwEthStatsRxPkts2048to4095Octets

Number of packets(2048~4095 octets in length).
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.22

hwEthStatsRxPkts4096to9216Octets

Number of packets(4096~9216 octets in length).
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.23

hwEthStatsTxOctets

Number of transmitted octets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.24

hwEthStatsTxPkts

Number of transmitted frames.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.25

hwEthStatsTxBroadcastPkts

Number of transmitted broadcast frames.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.26

hwEthStatsTxMulticastPkts

Number of transmitted multicast frames.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.27

hwEthStatsTxPauseFramePkts

Number of transmitted pause frames.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.28

hwTimeElapsed

The elapsed time of the current interval.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.16.1.1.29

hwValidInterval

whether the interval number is valid.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.5.14.16.1.1.30

hwEthStatsStartTime

Start time of the interval.

OctetString

.1.3.6.1.4.1.2011.5.14.16.1.1.31

hwEthStatsValidNumber

Number of valid interval.
'-1' means invalid value.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.16.1.1.32

hwEthStatsInvalidNumber

Number of invalid interval.
'-1' means invalid value.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.16.1.1.33

hwEthStatsStatusChangeTimes

Number of port status changed.
'-1' means invalid value.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.16.1.1.34

hwEthStatsRxUnicastPkts

Number of received unicast packets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.35

hwEthStatsTxUnicastPkts

Number of transmitted unicast packets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.36

hwEthStatsRxAlignErrors

Number of received alignment error packets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.37

hwEthStatsTxCollisionPkts

Number of transmitted collision packets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.38

hwEthStatsTxSingleCollisionPkts

Number of transmitted single collision packets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.39

hwEthStatsTxMultipleCollisionPkts

Number of transmitted multiple collision packets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.40

hwEthStatsDiscardedUndersizedPkts

Number of discarded undersized packets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.41

hwEthStatsTxUnderSizedPkts

Number of transmitted undersized packets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.42

hwEthStatsTxFragmentsPkts

Number of transmitted fragment packets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.43

hwEthStatsTxJabbers

Number of transmitted jabbers packets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.44

hwEthStatsTxOverSizedPkts

Number of transmitted oversized packets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.45

hwEthStatsTx64OctetsPkts

Number of transmitted packets(64 octets in length).
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.46

hwEthStatsTx65to127OctetsPkts

Number of transmitted packets(65~127 octets in length).
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.47

hwEthStatsTx128to255OctetsPkts

Number of transmitted packets(128~255 octets in length).
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.48

hwEthStatsTx256to511OctetsPkts

Number of transmitted packets(256~511 octets in length).
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.49

hwEthStatsTx512to1023OctetsPkts

Number of transmitted packets(512~1023 octets in length).
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.50

hwEthStatsTx1024to1518OctetsPkts

Number of transmitted packets(1024~1518 octets in length).
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.51

hwEthStatsTxErrorPkts

Number of transmitted error packets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.52

hwEthStatsRxErrorPkts

Number of received error packets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.53

hwEthStatsTxDropPkts

Number of transmitted discarded packets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.54

hwEthStatsTxCRCErrorPkts

Number of transmitted CRC error packets.
'18446744073709551615' means invalid value.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.5.14.16.1.1.55

hwEthStatsEfmErroredFrameEvents

Number of Efm Errored Frame Events.
'4294967295' means invalid value.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.1.1.56

hwEthStatsEfmErroredFrameSecondSummaryEvents

Number of Efm Errored Frame Second Summary Events.
'4294967295' means invalid value.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.1.1.57

hwEthStatsEfmErroredFramePeriodEvents

Number of Efm Errored Frame Period Events.
'4294967295' means invalid value.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.1.1.58

hwEthHistoryStatsAlarmProfTable

table

.1.3.6.1.4.1.2011.5.14.16.2 · 1 row entry · 63 columns

Open in standard view

Ethernet Alarm Profile.
The index of this table is alarm-profile's index, hwEthStatsAlarmProfIndex.

hwEthHistoryStatsAlarmProfEntry entry .1.3.6.1.4.1.2011.5.14.16.2.1

Ethernet Alarm Profile.
The index of this entry is alarm-profile's index, hwEthStatsAlarmProfIndex.

Indexes

hwEthStatsAlarmProfIndex

Column Syntax OID

hwEthStatsAlarmProfIndex

This object identifies a row in this table.
There are 16 alarm profiles now, numbered 1 to 16.
When the value of hwEthStatsAlarmProfIndex is set to -1 for a profile to be added,
the system will automatically assign an …

Integer32

Constraints:
range: -1--1
range: 1-16

.1.3.6.1.4.1.2011.5.14.16.2.1.1

hwEthStatsAlarmProfName

This object identifies the name of alarm profile.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.5.14.16.2.1.2

hwEthStatsAlarmTableRefNum

This object identifies the reference times of alarm profile.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.16.2.1.3

hwEthAlarmProfRowStatus

This object is used to create a new row or to modify or
delete an existing row in this table.

Before a profile can be deleted, it must be not
referenced by all ports.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.16.2.1.4

hwEthStatsTxPktsThresH

Threshold for high byte of Transmitted frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.5

hwEthStatsTxPktsThresL

Threshold for low byte of Transmitted frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.6

hwEthStatsRxPktsThresH

Threshold for high byte of Received frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.7

hwEthStatsRxPktsThresL

Threshold for low byte of Received frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.8

hwEthStatsTxOctetsThresH

Threshold for high byte of Transmitted Octets in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.9

hwEthStatsTxOctetsThresL

Threshold for low byte of Transmitted Octets in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.10

hwEthStatsRxOctetsThresH

Threshold for high byte of Received Octets in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.11

hwEthStatsRxOctetsThresL

Threshold for low byte of Received Octets in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.12

hwEthStatsTxUnicastPktsThresH

Threshold for high byte of Transmitted Unicast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.13

hwEthStatsTxUnicastPktsThresL

Threshold for low byte of Transmitted Unicast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.14

hwEthStatsRxUnicastPktsThresH

Threshold for high byte of Received Unicast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.15

hwEthStatsRxUnicastPktsThresL

Threshold for low byte of Received Unicast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.16

hwEthStatsTxMulticastPktsThresH

Threshold for high byte of Transmitted Multicast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.17

hwEthStatsTxMulticastPktsThresL

Threshold for low byte of Transmitted Multicast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.18

hwEthStatsRxMulticastPktsThresH

Threshold for high byte of Received Multicast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.19

hwEthStatsRxMulticastPktsThresL

Threshold for low byte of Received Multicast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.20

hwEthStatsTxBroadcastPktsThresH

Threshold for high byte of Transmitted Broadcast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.21

hwEthStatsTxBroadcastPktsThresL

Threshold for low byte of Transmitted Broadcast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.22

hwEthStatsRxBroadcastPktsThresH

Threshold for high byte of Received Broadcast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.23

hwEthStatsRxBroadcastPktsThresL

Threshold for low byte of Received Broadcast frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.24

hwEthStatsTxPausePktsThresH

Threshold for high byte of Transmitted Pause frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.25

hwEthStatsTxPausePktsThresL

Threshold for low byte of Transmitted Pause frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.26

hwEthStatsRxAlignErrorsThresH

Threshold for high byte of Received Alignment Error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.27

hwEthStatsRxAlignErrorsThresL

Threshold for low byte of Received Alignment Error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.28

hwEthStatsTxDropPktsThresH

Threshold for high byte of Transmitted Discarded frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.29

hwEthStatsTxDropPktsThresL

Threshold for low byte of Transmitted Discarded frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.30

hwEthStatsRxDropEventsThresH

Threshold for high byte of Received Discarded frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.31

hwEthStatsRxDropEventsThresL

Threshold for low byte of Received Discarded frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.32

hwEthStatsTxCRCErrorPktsThresH

Threshold for high byte of Transmitted CRC error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.33

hwEthStatsTxCRCErrorPktsThresL

Threshold for low byte of Transmitted CRC error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.34

hwEthStatsRxCRCAlignErrorsThresH

Threshold for high byte of Received CRC error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.35

hwEthStatsRxCRCAlignErrorsThresL

Threshold for low byte of Received CRC error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.36

hwEthStatsTxCollisionPktsThresH

Threshold for high byte of Transmitted Collision frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.37

hwEthStatsTxCollisionPktsThresL

Threshold for low byte of Transmitted Collision frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.38

hwEthStatsTxOversizedPktsThresH

Threshold for high byte of Transmitted Oversize frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.39

hwEthStatsTxOversizedPktsThresL

Threshold for low byte of Transmitted Oversize frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.40

hwEthStatsRxOversizePktsThresH

Threshold for high byte of Received Oversize frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.41

hwEthStatsRxOversizePktsThresL

Threshold for low byte of Received Oversize frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.42

hwEthStatsSingleCollisionPktsThresH

Threshold for high byte of Single Collision frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.43

hwEthStatsSingleCollisionPktsThresL

Threshold for low byte of Single Collision frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.44

hwEthStatsMulCollisionPktsThresH

Threshold for high byte of Multiple Collision frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.45

hwEthStatsMulCollisionPktsThresL

Threshold for low byte of Multiple Collision frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.46

hwEthStatsTxUndersizedPktsThresH

Threshold for high byte of Transmitted Undersized frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.47

hwEthStatsTxUndersizedPktsThresL

Threshold for low byte of Transmitted Undersized frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.48

hwEthStatsRxDiscardedUndersizedPktsThresH

Threshold for high byte of Received Undersized frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.49

hwEthStatsRxDiscardedUndersizedPktsThresL

Threshold for low byte of Received Undersized frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.50

hwEthStatsTxFragmentsPktsThresH

Threshold for high byte of Transmitted Fragment frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.51

hwEthStatsTxFragmentsPktsThresL

Threshold for low byte of Transmitted Fragment frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.52

hwEthStatsRxFragmentsPktsThresH

Threshold for high byte of Received Fragment frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.53

hwEthStatsRxFragmentsPktsThresL

Threshold for low byte of Received Fragment frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.54

hwEthStatsTxJabbersThresH

Threshold for high byte of Transmitted Jabbers frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.55

hwEthStatsTxJabbersThresL

Threshold for low byte of Transmitted Jabbers frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.56

hwEthStatsRxJabbersThresH

Threshold for high byte of Received Jabbers frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.57

hwEthStatsRxJabbersThresL

Threshold for low byte of Received Jabbers frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.58

hwEthStatsTxErrorPktsThresH

Threshold for high byte of Transmitted Error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.59

hwEthStatsTxErrorPktsThresL

Threshold for low byte of Transmitted Error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.60

hwEthStatsRxErrorPktsThresH

Threshold for high byte of Received Error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.61

hwEthStatsRxErrorPktsThresL

Threshold for low byte of Received Error frames in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.62

hwEthStatsStatusChangeTimesThres

Threshold of Status Change times in statistics performance.
When the performance value is higher than this threshold,
the system should send an alarm.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.16.2.1.63

hwDynamicMacQueryTable

table

.1.3.6.1.4.1.2011.5.14.17 · 1 row entry · 6 columns

Open in standard view

Query Dynamic MAC address.
The indexes of this table are ifIndex, hwDynamicMacVlanId, hwDynamicMacIndex, hwDynamicMacQueryType,
hwDynamicMacQueryPara0, hwDynamicMacQueryPara1, hwDynamicMacQueryPara2, hwDynamicMacQueryPara3.

hwDynamicMacQueryEntry entry .1.3.6.1.4.1.2011.5.14.17.1

Query Dynamic MAC address.
The indexes of this entry are ifIndex, hwDynamicMacVlanId, hwDynamicMacIndex, hwDynamicMacQueryType,
hwDynamicMacQueryPara0, hwDynamicMacQueryPara1, hwDynamicMacQueryPara2, hwDynamicMacQueryPa…

Indexes

IF-MIBifIndex hwDynamicMacVlanId hwDynamicMacIndex hwDynamicMacQueryType hwDynamicMacQueryPara0 hwDynamicMacQueryPara1 hwDynamicMacQueryPara2 hwDynamicMacQueryPara3

Column Syntax OID

hwDynamicMacQueryType

query type.

HwDynamicMacQueryType

Textual Convention: HwDynamicMacQueryType Enumeration

Type Values:

1	eponOntPortInSpecVlan

.1.3.6.1.4.1.2011.5.14.17.1.1

hwDynamicMacQueryPara0

The First reserved Parameter of HwDynamicMacQueryEntry.

HwDynamicMacQueryPara

Textual Convention: HwDynamicMacQueryPara Integer32

.1.3.6.1.4.1.2011.5.14.17.1.2

hwDynamicMacQueryPara1

The Second reserved Parameter of HwDynamicMacQueryEntry.

HwDynamicMacQueryPara

Textual Convention: HwDynamicMacQueryPara Integer32

.1.3.6.1.4.1.2011.5.14.17.1.3

hwDynamicMacQueryPara2

The Third reserved Parameter of HwDynamicMacQueryEntry.

HwDynamicMacQueryPara

Textual Convention: HwDynamicMacQueryPara Integer32

.1.3.6.1.4.1.2011.5.14.17.1.4

hwDynamicMacQueryPara3

The Fourth reserved Parameter of HwDynamicMacQueryEntry.

HwDynamicMacQueryPara

Textual Convention: HwDynamicMacQueryPara Integer32

.1.3.6.1.4.1.2011.5.14.17.1.5

hwExtDynamicMacAddr

Five mac addresses, and its format is (XX-XX-XX-XX-XX-XX)* .

OctetString

.1.3.6.1.4.1.2011.5.14.17.1.6

hwUniServiceDataQueryTable

table

.1.3.6.1.4.1.2011.5.14.18 · 1 row entry · 4 columns

Open in standard view

The hwUniServiceDataQueryTable is used for querying the service flow configuration of xDSL port.
This table supports to query bind IP, static MAC, igmp user and service flow.
The indexes of this table are ifIndex, hwUniServiceDataType, hwUniServiceDataIndex1 and hwUniServiceDataIndex2.

hwUniServiceDataQueryEntry entry .1.3.6.1.4.1.2011.5.14.18.1

Indexes

IF-MIBifIndex hwUniServiceDataType hwUniServiceDataIndex1 hwUniServiceDataIndex2

Column Syntax OID

hwUniServiceDataType

The type of the query information:
1 means querying static IP which is bound on the service flow.
2 means querying static MAC which is bound on the service flow.
3 means querying igmp user which is bound on the service …

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.18.1.1

hwUniServiceDataIndex1

The meaning is variable with the value of hwUniServiceDataType:
if hwUniServiceDataType equals 1(querying static IP),
this parameter indicates the service flow ID of the static IP.
if hwUniServiceDataType equals 2(query…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.18.1.2

hwUniServiceDataIndex2

The meaning is variable with the value of hwUniServiceDataType:
if hwUniServiceDataType equals 1(querying static IP), this parameter indicates the index of the static IP.
if hwUniServiceDataType equals 2(querying static…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.18.1.3

hwUniServiceDataEntryStatus

Used to query the status of the query operation.
It is read-only and the value active(1) is always returned.
Options:
1. active(1) -indicates the query operation

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.18.1.4

hwCtpEthAttributeCfgTable

table

.1.3.6.1.4.1.2011.5.14.20 · 1 row entry · 7 columns

Open in standard view

Indicates the CTP_ETH port attribute configuration. The index of this table is ifIndex.

hwCtpEthAttributeCfgEntry entry .1.3.6.1.4.1.2011.5.14.20.1

Indicates the CTP_ETH port attribute configuration. The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column Syntax OID

hwTrafficSuppressBroadcast

This object is used to set broadcast traffic suppression on a port.
Range: -1,0-13 …

Integer32r/w

Constraints:
range: -1-13

.1.3.6.1.4.1.2011.5.14.20.1.1

hwTrafficSuppressMulticast

This object is used to set unknown multicast traffic suppression on a port.
Range: -1,0-13 …

Integer32r/w

Constraints:
range: -1-13

.1.3.6.1.4.1.2011.5.14.20.1.2

hwTrafficSuppressUnknowncast

This object is used to set unknown unicast traffic suppression on a port.
Range: -1,0-13 …

Integer32r/w

Constraints:
range: -1-13

.1.3.6.1.4.1.2011.5.14.20.1.3

hwCtpEthJumboFrameEnable

This object is used to enable and disable jumbo frames.
This object does not support binding and issuance of the entire table.
When the carriers' servers need to exchange a large amount of data with their devices, …

Enumerationr/w

Enumerated Values:

-1	invalid
1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.14.20.1.4

hwTrafficSuppressRateBroadcast

This object is used to set broadcast traffic suppression on a port.
Range: -1,0-24414
Unit: pps.
-1 indicates indicates no configuration.

Integer32r/w

Constraints:
range: -1-24414

.1.3.6.1.4.1.2011.5.14.20.1.5

hwTrafficSuppressRateMulticast

This object is used to set unknown multicast traffic suppression on a port.
Range: -1,0-24414
Unit: pps.
-1 indicates indicates no configuration.

Integer32r/w

Constraints:
range: -1-24414

.1.3.6.1.4.1.2011.5.14.20.1.6

hwTrafficSuppressRateUnknowncast

This object is used to set unknown unicast traffic suppression on a port.
Range: -1,0-24414
Unit: pps.
-1 indicates indicates no configuration.

Integer32r/w

Constraints:
range: -1-24414

.1.3.6.1.4.1.2011.5.14.20.1.7

hwXdslEtherStatsTable

table

.1.3.6.1.4.1.2011.5.14.24 · 1 row entry · 16 columns

Open in standard view

Statistics of xdsl port query table.
The index of this table is ifIndex.

hwXdslEtherStatsEntry entry .1.3.6.1.4.1.2011.5.14.24.1

Statistics of xdsl port query table.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwXdslEtherStatsInAllPkts Number of received packets.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.24.1.1`
hwXdslEtherStatsInUcastPkts Number of received unicast packets.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.24.1.2`
hwXdslEtherStatsInMcastPkts Number of received multicast packets.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.24.1.3`
hwXdslEtherStatsInBcastPkts Number of received broadcast packets.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.24.1.4`
hwXdslEtherStatsInAllOctets Number of received octet.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.24.1.5`
hwXdslEtherStatsInUcastOctets Number of received unicast octet.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.24.1.6`
hwXdslEtherStatsInMcastOctets Number of received multicast octet.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.24.1.7`
hwXdslEtherStatsInBcastOctets Number of received broadcast octet.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.24.1.8`
hwXdslEtherStatsOutAllPkts Number of transmitted packets.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.24.1.9`
hwXdslEtherStatsOutUcastPkts Number of transmitted unicast packets.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.24.1.10`
hwXdslEtherStatsOutMcastPkts Number of transmitted multicast packets.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.24.1.11`
hwXdslEtherStatsOutBcastPkts Number of transmitted broadcast packets.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.24.1.12`
hwXdslEtherStatsOutAllOctets Number of transmitted octet.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.24.1.13`
hwXdslEtherStatsOutUcastOctets Number of transmitted unicast octet.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.24.1.14`
hwXdslEtherStatsOutMcastOctets Number of transmitted multicast octet.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.24.1.15`
hwXdslEtherStatsOutBcastOctets Number of transmitted broadcast octet.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.24.1.16`

hwServiceTypeDetectTable

table

.1.3.6.1.4.1.2011.5.14.26.2 · 1 row entry · 3 columns

Open in standard view

Indicates port service detect table.
The index of this table is ifIndex.

hwServiceTypeDetectEntry entry .1.3.6.1.4.1.2011.5.14.26.2.1

Indicates port service detect table.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column Syntax OID

hwDetectSwitch

Indicates the detect service type.
Options:
1. disable(1) -indicates the detect Switch is disabled.
2. detectHSI(2) -indicates the HSI detect is enabled.
3. detectMultiService(3) -indicates the multi…

Enumerationr/w

Enumerated Values:

1	disable
2	detectHSI
3	detectMultiService

.1.3.6.1.4.1.2011.5.14.26.2.1.1

hwDetectUserMac

The MAC address, and its format is XX-XX-XX-XX-XX-XX.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.2011.5.14.26.2.1.2

hwDetectUserVlan

The user VLAN ID, 0 means untagged, -1 is reserved.

Integer32

Constraints:
range: -1-4095

.1.3.6.1.4.1.2011.5.14.26.2.1.3

hwPortPermitForwardTable

table

.1.3.6.1.4.1.2011.5.14.29 · 1 row entry · 3 columns

Open in standard view

The indexes of this table are hwExtPermitForwardIfIdex and hwExtPermitForwardSecondIndex.
This table is used to set or query the forwarding status of the port protocol packet.
It supports the query and set operations

hwPortPermitForwardEntry entry .1.3.6.1.4.1.2011.5.14.29.1

The indexes of this entry are hwExtPermitForwardIfIdex and hwExtPermitForwardSecondIndex.
This table is used to set or query the forwarding status of the port protocol packet.
It supports the query and set operations

Indexes

hwExtPermitForwardIfIdex hwExtPermitForwardSecondIndex

Column Syntax OID

hwExtPermitForwardIfIdex

Indicates the port index of forwarding the CFM protocol packet.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.29.1.1

hwExtPermitForwardSecondIndex

Indicates the second index. The meaning varies with the port type.
It must be 0xFFFFFFFF for the DSL or ETH port, and is the ONT ID or 0xFFFFFFFF for the xPON port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.29.1.2

hwExtCfmPermitForwarding

Indicates the permission switch of forwarding the CFM protocol packet.
Options:
1. enable(1) -indicates that the CFM protocol packet can be forwarded.
2. disable(2) -indicates that the CFM protocol packet is discarded…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.5.14.29.1.3

hwResourceOverloadAwareTable

table

.1.3.6.1.4.1.2011.5.14.30 · 1 row entry · 4 columns

Open in standard view

The index of this table is hwResourceType.
This table is used to query the configuration of resource overload.
It supports the query and set operations.

hwResourceOverloadAwareEntry entry .1.3.6.1.4.1.2011.5.14.30.1

The index of this entry is hwResourceType.
This table is used to query the configuration of resource overload.
It supports the query and set operations.

Indexes

hwResourceType

Column Syntax OID

hwResourceType

Indicates the resource type.
Options:
1. mac(1) -indicates that the resource is the MAC address.
2. ipneighbourhardware(2) -indicates that the resource is the ip neighbour hardware.
3. iproutehardware(3) -indicates …

Enumeration

Enumerated Values:

1	mac
2	ipneighbourhardware
3	iproutehardware
4	iptunnelhardware
5	vpnhardware
6	srv6tunnelhardware

.1.3.6.1.4.1.2011.5.14.30.1.1

hwResourceOverloadAwareSwitch

Indicates the switch of resource overload awareness.
Options:
1. enable(1) -indicates that the function of monitoring resources is enabled.
2. disable(2) -indicates that the function of monitoring resources is disab…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.5.14.30.1.2

hwResourceOverloadAwareUpperThreshold

Indicates the upper threshold of the resource overload awareness.

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.30.1.3

hwResourceOverloadAwareLowerThreshold

Indicates the lower threshold of the resource overload awareness.

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.14.30.1.4

hwInfinibandTable

table

.1.3.6.1.4.1.2011.5.14.31 · 1 row entry · 1 columns

Open in standard view

The index of this table is ifIndex.
This table is used to query the status parameters of infiniband port.

hwInfinibandEntry entry .1.3.6.1.4.1.2011.5.14.31.1

The index of this entry is ifIndex.
This table is used to query the status parameters of infiniband port.

Indexes

IF-MIBifIndex

Column Syntax OID

hwInfinibandPortState

The current operational state of the infiniband port.
Options:
1. up(1) -indicates that the operation state is up
2. down(2) -indicates that the operation state is down

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.2011.5.14.31.1.1

hwPortAutoServiceParaTable

table

.1.3.6.1.4.1.2011.5.14.35 · 1 row entry · 9 columns

Open in standard view

Port auto service para table.
The index of this table is ifIndex.

hwPortAutoServiceParaEntry entry .1.3.6.1.4.1.2011.5.14.35.1

Port auto service para table.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column Syntax OID

hwPortAutoServiceParaRowStatus

This object is used to create a new row or to modify or
delete an existing row in this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.35.1.1

hwPortAutoServiceParaType

singleVlan - Creat single service flow
doubleVlan - Creat double service flow

Enumerationr/w

Enumerated Values:

1	singleVlan
2	doubleVlan

.1.3.6.1.4.1.2011.5.14.35.1.2

hwPortAutoServiceParaServiceVlan

Number of service vlan.

Integer32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.2011.5.14.35.1.3

hwPortAutoServiceParaClientVlanBase

Number of Client vlan.
singleVlan mode is not need(-1).
doubleVlan mode must be define.

Integer32r/w

Constraints:
range: -1--1
range: 1-4093

.1.3.6.1.4.1.2011.5.14.35.1.4

hwPortAutoServiceParaOnuVlanNumber

Number of ONU max vlan num.

Integer32r/w

Constraints:
range: 1-128

.1.3.6.1.4.1.2011.5.14.35.1.5

hwPortAutoServiceParaReceiveTrafficDescrIndex

Indicates the index of the IP traffic table.
Range: 1-1024

Integer32r/w

Constraints:
range: -1--1
range: 1-1024

.1.3.6.1.4.1.2011.5.14.35.1.6

hwPortAutoServiceParaTransmitTrafficDescrIndex

Indicates the index of the IP traffic table.
Range: 1-1024

Integer32r/w

Constraints:
range: -1--1
range: 1-1024

.1.3.6.1.4.1.2011.5.14.35.1.7

hwPortAutoServiceParaInboundTrafficTableName

Indicates the name of IP traffic table .

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.14.35.1.8

hwPortAutoServiceParaOutboundTrafficTableName

Indicates the name of IP traffic table .

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.14.35.1.9

hwDslamTrafficUpportMonitorMemberTable

table

.1.3.6.1.4.1.2011.5.14.38.4 · 1 row entry · 2 columns

Open in standard view

Configures the monitoring table of uplink ports.
The index of this table is hwDslamTrafficUpportMonitorMemberIfIndex.

hwDslamTrafficUpportMonitorMemberEntry entry .1.3.6.1.4.1.2011.5.14.38.4.1

Configures the monitoring table of uplink ports.
The index of this entry is hwDslamTrafficUpportMonitorMemberIfIndex.

Indexes

hwDslamTrafficUpportMonitorMemberIfIndex

Column Syntax OID

hwDslamTrafficUpportMonitorMemberIfIndex

Indicates the index of the monitoring table of uplink ports.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.38.4.1.1

hwDslamTrafficUpportMonitorRowStatus

Row status, used to query, create, modify, and delete a monitoring table of uplink ports.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is always active(1).
D…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.38.4.1.2

hwDslamTrafficUpportMonitorRecordTable

table

.1.3.6.1.4.1.2011.5.14.38.5 · 1 row entry · 7 columns

Open in standard view

Indicates the Traffic monitoring table of uplink ports.
The index of this table is hwDslamTrafficUpportMonitorRecordIfIndex, hwDslamTrafficUpportMonitorRecordIndex.

hwDslamTrafficUpportMonitorRecordEntry entry .1.3.6.1.4.1.2011.5.14.38.5.1

Indicates the Traffic monitoring table of uplink ports.
The index of this entry is hwDslamTrafficUpportMonitorRecordIfIndex, hwDslamTrafficUpportMonitorRecordIndex.

Indexes

hwDslamTrafficUpportMonitorRecordIfIndex hwDslamTrafficUpportMonitorRecordIndex

Column	Syntax	OID
hwDslamTrafficUpportMonitorRecordIfIndex Indicates the level-1 index of the Traffic monitoring table of uplink ports.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.38.5.1.1`
hwDslamTrafficUpportMonitorRecordIndex Indicates the level-2 index of the Traffic monitoring table of uplink ports.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.38.5.1.2`
hwDslamTrafficUpportMonitorRecordTime Indicates period end time of Traffic packet statistics.	SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime `OctetString` Type Constraints: `range: 8` `range: 11`	`.1.3.6.1.4.1.2011.5.14.38.5.1.3`
hwDslamTrafficUpportMonitorUpstream Indicates upstream uraffic received by the uplink port.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.38.5.1.4`
hwDslamTrafficUpportMonitorDownstream Indicates downstream traffic received by the uplink port.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.38.5.1.5`
hwDslamTrafficUpportMonitorUpstreamLast Indicates last upstream traffic received by the uplink port.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.38.5.1.6`
hwDslamTrafficUpportMonitorDownstreamLast Indicates last downstream traffic received by the uplink port.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.38.5.1.7`

hwDslamTrafficUpportMonitorPeakRecordTable

table

.1.3.6.1.4.1.2011.5.14.38.10 · 1 row entry · 5 columns

Open in standard view

Indicates the traffic monitoring peak table of uplink ports.
The index of this table is hwDslamTrafficUpportMonitorPeakRecordIfIndex.

hwDslamTrafficUpportMonitorPeakRecordEntry entry .1.3.6.1.4.1.2011.5.14.38.10.1

Indicates the traffic monitoring peak table of uplink ports.
The index of this entry is hwDslamTrafficUpportMonitorPeakRecordIfIndex.

Indexes

hwDslamTrafficUpportMonitorPeakRecordIfIndex

Column	Syntax	OID
hwDslamTrafficUpportMonitorPeakRecordIfIndex Indicates the index of the traffic monitoring peak table of uplink ports.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.38.10.1.1`
hwDslamTrafficUpportMonitorPeakUpstreamRecordTime Indicates period end time of upstream traffic peak.	SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime `OctetString` Type Constraints: `range: 8` `range: 11`	`.1.3.6.1.4.1.2011.5.14.38.10.1.2`
hwDslamTrafficUpportMonitorPeakUpstream Indicates upstream traffic peak received by the uplink port.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.38.10.1.3`
hwDslamTrafficUpportMonitorPeakDownstreamRecordTime Indicates period end time of downstream traffic peak.	SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime `OctetString` Type Constraints: `range: 8` `range: 11`	`.1.3.6.1.4.1.2011.5.14.38.10.1.4`
hwDslamTrafficUpportMonitorPeakDownstream Indicates downstream traffic peak received by the uplink port.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.38.10.1.5`

hwDslamNonUnicastUpportMonitorMemberTable

table

.1.3.6.1.4.1.2011.5.14.40.9 · 1 row entry · 8 columns

Open in standard view

Configures the non-unicast monitoring table of uplink ports.
The index of this table is hwDslamNonUnicastUpportMonitorIfIndex.

hwDslamNonUnicastUpportMonitorMemberEntry entry .1.3.6.1.4.1.2011.5.14.40.9.1

Configures the non-unicast monitoring table of uplink ports.
The index of this entry is hwDslamNonUnicastUpportMonitorIfIndex.

Indexes

hwDslamNonUnicastUpportMonitorIfIndex

Column Syntax OID

hwDslamNonUnicastUpportMonitorIfIndex

Indicates the index of the non-unicast monitoring table of uplink ports.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.40.9.1.1

hwDslamNonUnicastUpportMonitorRowStatus

Row status, used to query, create, modify, and delete a non-unicast monitoring table of uplink ports.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is always …

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.5.14.40.9.1.2

hwDslamNonUnicastUpportMonitorBroadcastThd

Indicates the broadcast monitoring threshold for the uplink port.
When the threshold for monitoring non-unicast packets on the specified port is set to auto,
this threshold takes effect 2 levels above the traffic suppr…

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.2011.5.14.40.9.1.3

hwDslamNonUnicastUpportMonitorUnknownUnicastThd

Indicates the unknown unicast monitoring threshold for the uplink port.
When the threshold for monitoring non-unicast packets on the specified port is set to auto,
this threshold takes effect 2 levels above the traffic…

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.2011.5.14.40.9.1.4

hwDslamNonUnicastUpportMonitorUnknownMulticastThd

Indicates the unknown multicast monitoring threshold for the uplink port.
When the threshold for monitoring non-unicast packets on the specified port is set to auto,
this threshold takes effect 2 levels above the traff…

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.2011.5.14.40.9.1.5

hwDslamNonUnicastUpportMonitorBroadcastThdActiveValue

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.2011.5.14.40.9.1.6

hwDslamNonUnicastUpportMonitorUnknownUnicastThdActiveValue

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.2011.5.14.40.9.1.7

hwDslamNonUnicastUpportMonitorUnknownMulticastThdActiveValue

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.2011.5.14.40.9.1.8

hwDslamNonUnicastUpportMonitorRecordTable

table

.1.3.6.1.4.1.2011.5.14.40.10 · 1 row entry · 6 columns

Open in standard view

Indicates the non-unicast monitoring record table of uplink ports.
The index of this table is hwDslamNonUnicastUpportMonitorRecordIfIndex, hwDslamNonUnicastUpportMonitorRecordIndex.

hwDslamNonUnicastUpportMonitorRecordEntry entry .1.3.6.1.4.1.2011.5.14.40.10.1

Indicates the non-unicast monitoring record table of uplink ports.
The index of this entry is hwDslamNonUnicastUpportMonitorRecordIfIndex, hwDslamNonUnicastUpportMonitorRecordIndex.

Indexes

hwDslamNonUnicastUpportMonitorRecordIfIndex hwDslamNonUnicastUpportMonitorRecordIndex

Column	Syntax	OID
hwDslamNonUnicastUpportMonitorRecordIfIndex Indicates the level-1 index of the non-unicast monitoring table of uplink ports.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.40.10.1.1`
hwDslamNonUnicastUpportMonitorRecordIndex Indicates the level-2 index of the non-unicast monitoring table of uplink ports.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.40.10.1.2`
hwDslamNonUnicastUpportMonitorRecordTime Indicates period end time of non-unicast packet statistics.	SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime `OctetString` Type Constraints: `range: 8` `range: 11`	`.1.3.6.1.4.1.2011.5.14.40.10.1.3`
hwDslamNonUnicastUpportMonitorBroadcastRate Indicates broadcast packet rate the uplink port.	ppsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.40.10.1.4`
hwDslamNonUnicastUpportMonitorUnknownUnicastRate Indicates unknown unicast packet rate the uplink port.	ppsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.40.10.1.5`
hwDslamNonUnicastUpportMonitorUnknownMulticastRate Indicates unknown multicast packet rate the uplink port.	ppsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.40.10.1.6`

hwDslamNonUnicastUpportMonitorPeakRecordTable

table

.1.3.6.1.4.1.2011.5.14.40.11 · 1 row entry · 7 columns

Open in standard view

Indicates the table recording the monitored peak non-unicast packets on the uplink port.
The index of this table is hwDslamNonUnicastUpportMonitorPeakRecordIfIndex.

hwDslamNonUnicastUpportMonitorPeakRecordEntry entry .1.3.6.1.4.1.2011.5.14.40.11.1

Indicates the table recording the monitored peak non-unicast packets on the uplink port.
The index of this entry is hwDslamNonUnicastUpportMonitorPeakRecordIfIndex.

Indexes

hwDslamNonUnicastUpportMonitorPeakRecordIfIndex

Column	Syntax	OID
hwDslamNonUnicastUpportMonitorPeakRecordIfIndex Indicates the index of the table recording the monitored peak non-unicast packets on the uplink port.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.40.11.1.1`
hwDslamNonUnicastUpportMonitorPeakBroadcastRecordTime Indicates the end time of peak broadcast packet measurement.	SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime `OctetString` Type Constraints: `range: 8` `range: 11`	`.1.3.6.1.4.1.2011.5.14.40.11.1.2`
hwDslamNonUnicastUpportMonitorPeakBroadcastRate Indicates broadcast packet rate the uplink port.	ppsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.40.11.1.3`
hwDslamNonUnicastUpportMonitorPeakUnknownUnicastRecordTime Indicates the end time of peak unknown unicast packet measurement.	SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime `OctetString` Type Constraints: `range: 8` `range: 11`	`.1.3.6.1.4.1.2011.5.14.40.11.1.4`
hwDslamNonUnicastUpportMonitorPeakUnknownUnicastRate Indicates unknow unicast packet rate the uplink port.	ppsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.40.11.1.5`
hwDslamNonUnicastUpportMonitorPeakUnknownMulticastRecordTime Indicates the end time of peak unknow multicast packet measurement.	SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime `OctetString` Type Constraints: `range: 8` `range: 11`	`.1.3.6.1.4.1.2011.5.14.40.11.1.6`
hwDslamNonUnicastUpportMonitorPeakUnknownMulticastRate Indicates unknow multicast packet rate the uplink port.	ppsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.2011.5.14.40.11.1.7`