hwIpTrafficPbs
HUAWEI-ETHERLIKE-EXT-MIB ·
.1.3.6.1.4.1.2011.5.14.3.8.1.6
Object
column
r/w
Integer32
Indicates the peak burst size (PBS). Range: -1, 2000-1024000000 bytes. Unit: bytes. PBS is an optional parameter.If the parameter is not specified, it can be obtained by formula min(2000+32*pir,1024000000). -1 indicates PBS off.
Context
- MIB
- HUAWEI-ETHERLIKE-EXT-MIB
- OID
.1.3.6.1.4.1.2011.5.14.3.8.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwIpTrafficParamEntry
- Table
- hwIpTrafficParamTable
- Siblings
- 28
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1--1
range: 2000-1024000000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIpTrafficIndex Indicates the table index.
Range: 1-1024, -1
When creating an IP traffic profile, you can specify or not specify a profile index.
If you specify it to 4294967295, the system will… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.1 |
| hwIpTrafficRowStatus Indicates the row status.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create an IP traffic profile, set this leaf to createAndGo(4);
to delete an IP traffic prof… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.14.3.8.1.10 |
| hwIpTrafficInnerPriority Indicates the inner priority of the IP traffic profile.
The higher 16 bits indicate the inner priority mapping policy and the lower 16 bits indicate the inner priority.
The inne… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.3.8.1.11 |
| hwIpTrafficInnerPriorityMappingIndex When the inner VLAN priority mapping policy is mapping from the outer or inner CoS domain on the ingress,
the index (range: 1-4) of the service port priority mapping profile is u… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.12 |
| hwIpTrafficPriorityMappingIndex When the outer VLAN priority mapping policy is mapping from the outer or inner CoS domain on the ingress,
the index (range: 1-4) of the service port priority mapping profile is u… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.13 |
| hwIpTrafficColorPolicy Indicates the color policy of the IP traffic profile.
Options:
1. dei(1) -Indicate the dei mode.
2. cos(2) -Indicate the CoS mode. | column | Enumeration | .1.3.6.1.4.1.2011.5.14.3.8.1.14 |
| hwIpTrafficCarThresholdProfileIndex Indicates the car-threshold profile of the IP traffic profile | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.15 |
| hwIpTrafficFixBandWidth Indicates the fixed bandwidth to be allocated by the DBA. This parameter takes effect to the E2E service flow only on a GPON board.
Range: -1, 0-10240000 kbit/s.
Unit: kbit/s.
hwI… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.16 |
| hwIpTrafficCouplingFlag The Coupling Flag CF is set to either 0 or 1. The choice of the value for CF has the effect of controlling the volume of the yellow
Service Frames admitted to the network. When C… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.3.8.1.17 |
| hwIpTrafficDSCP Indicates the DSCP source.
The most significant 16 bits indicate the DSCP policy, and the least significant 16 bits indicate the DSCP value.
------------------------------… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.3.8.1.18 |
| hwIpTrafficDSCPMappingIndex Indicates the index of the referenced DSCP mapping profile.
When the hwIpTrafficDSCP is set to user-dscp(OxFE), the mapping profile index must be set to a valid profile.
When the… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.19 |
| hwIpTrafficName Indicates the traffic table name.
Each IP traffic profile has a unique name. When creating an IP traffic profile,
you can specify or not specify a profile name. If you do not sp… | column | OctetString | .1.3.6.1.4.1.2011.5.14.3.8.1.2 |
| hwIpTrafficDropPrecedence Indicates the packet discarding policy.
Options:
1. invalid(-1) -indicates that this function is not supported.
2. remarkedOuterPriority(0) -indicates that the internal pack… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.3.8.1.20 |
| hwIpTrafficColorDEI Indicates the color mark. It indicates whether and where the color is marked.
Options:
1. unmarkDei(0) -indicates that the color is not marked.
2. outerDei(1) -indicate… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.3.8.1.21 |
| hwIpTrafficColorSource Indicates the color source. It indicates where the color is marked.
Default: outerDei(1).
Options:
1. invalid(-1) -invalid value.
2. outerDei(1) -indicates that the col… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.3.8.1.22 |
| hwIpTrafficE2EPriority Indicates the e2e priority of the IP traffic profile.
The higher 16 bits indicate the outer priority mapping policy and the lower 16 bits indicate the e2e priority.
The e2e prio… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.3.8.1.23 |
| hwIpTrafficE2EPriorityMappingIndex When the e2e VLAN priority mapping policy is mapping from the outer CoS domain on the ingress,
the index (range: 1-16) of the service port priority mapping profile is used.
The … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.3.8.1.24 |
| hwIpTrafficRateProfileName Indicates the name of the rate profile. | column | OctetString | .1.3.6.1.4.1.2011.5.14.3.8.1.25 |
| hwIpTrafficQueuePolicyProfileIndex Indicates the index of the queue policy profile.
Range: 1-4 | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.26 |
| hwIpTrafficPriorityGroupProfileName Indicates the name of the priority group profile. | column | OctetString | .1.3.6.1.4.1.2011.5.14.3.8.1.27 |
| hwIpTrafficWrrWeightYellow Indicates the WRR weight for yellow color packet.
Range: 0, 1-12
Default: 0
0 indicates WRR weight is auto calculated by PIR and CIR. | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.28 |
| hwIpTrafficWrrWeightGreen Indicates the WRR weight for green color packet.
Range: 0, 1-12
Default: 0
0 indicates WRR weight is auto calculated by PIR and CIR. | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.29 |
| hwIpTrafficCir Indicates the committed information rate (CIR).
Range: -1, 0-10240000 kbit/s.
Unit: kbit/s.
CIR is a mandatory parameter. This parameter must be an integer multiple of 64.
If th… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.3 |
| hwIpTrafficCbs Indicates the committed burst size (CBS).
Range: -1, 0-1024000000 bytes.
Unit: bytes.
CBS is an optional parameter. If the parameter is not specified,
it can be obtained by form… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.4 |
| hwIpTrafficPir Indicates the peak information rate (PIR).
Range: -1, 64-10240000 kbit/s.
Unit: kbit/s.
PIR is an optional parameter. If the parameter is not specified,
it can be obtained throu… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.5 |
| hwIpTrafficCm Indicates the color-aware mode of the IP traffic profile.
Options:
1. colorBlind(1) -Indicates color blind mode.
2. colorAware(2) -Indicates color aware mode. | column | Enumeration | .1.3.6.1.4.1.2011.5.14.3.8.1.7 |
| hwIpTrafficPriority Indicates the outer priority of the IP traffic profile.
The higher 16 bits indicate the outer priority mapping policy and the lower 16 bits indicate the outer priority.
The oute… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.3.8.1.8 |
| hwIpTrafficPriorityPolicy Indicates the queue-joining trust priority policy of the IP traffic profile.
Options:
1. localPriority(1) -Indicates the queue-joining trust the priority set by IP … | column | Enumeration | .1.3.6.1.4.1.2011.5.14.3.8.1.9 |