hwLanBoardExtWorkMode
HUAWEI-ETHERLIKE-EXT-MIB ·
.1.3.6.1.4.1.2011.5.14.4.1.1.1
Object
column
r/w
Enumeration
Mode of the LAN board.
Options:
1. general(1) -Indicates normal mode, in which the chip of LSW works normally.
2. ipdslam(2) -Indicatse IPDSLAM mode, the VLAN function of LSW chip is replaced by logic.
3. atmgroup(3) -Indicatse ATM group mode, applied to the multicast of ATM mode,
which supports not only the VLAN connection from xDSL to the LAN board,
but also the connection between VLAN and other ATM ports in the LAN.
4. ipcascade(4) -Indicates IP cascade mode.
Context
- MIB
- HUAWEI-ETHERLIKE-EXT-MIB
- OID
.1.3.6.1.4.1.2011.5.14.4.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwLanBoardExtEntry
- Table
- hwLanBoardExtTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | general |
2 | ipdslam |
3 | atmgroup |
4 | ipcascade |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwLanBoardExtPriorityLevel The level will limit for priority level, eg.level equal 2,so low priority scope is 0-2,
high priority scope is 3-7. | column | Integer32 | .1.3.6.1.4.1.2011.5.14.4.1.1.10 |
| hwLanBoardExtPitpStatus PITP switch state.
Options:
1. pitpoff(1) -Indicates PITP vmode and pmode are both disable.
2. pitpvmodeenable(2) -Indicates PITP vmode enable.
3. pitppmodeenable(3) … | column | Enumeration | .1.3.6.1.4.1.2011.5.14.4.1.1.11 |
| hwLanBoardExtPitpEthernetType The ethernet protocol type of PITP PDU, the default is 0x8200. | column | Integer32 | .1.3.6.1.4.1.2011.5.14.4.1.1.12 |
| hwLanBoardExtPitpPortTagType The port tag type of PITP PDU, the default is 0x0110. | column | Integer32 | .1.3.6.1.4.1.2011.5.14.4.1.1.13 |
| hwLanBoardExtPitpInfoTagType The infomation tag type of PITP PDU, the default is 0x0111. | column | Integer32 | .1.3.6.1.4.1.2011.5.14.4.1.1.14 |
| hwLanBoardExtPriorityControl Whether the LAN board supports the function of priority control.
Options:
1. enabled(1) -Indicates the order of priority for each connection can also be specified.
2. disabled(2… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.4.1.1.2 |
| hwLanBoardExtMulticastControl The traffic suppression of broadcast packet, in unit of packet/second. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.4.1.1.3 |
| hwLanBoardExtUnknowncastControl The traffic suppression of unknown unicast, in unit of packet/second. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.4.1.1.4 |
| hwLanBoardExtLogicLoop LAN board loopback mode.
Options:
1. noLoopback(1) -Cancel loopback.
2. gmiiRemote(2) -GMII remote loopback.
3. utoipaRemote(3) -UTOPIA remote loopback. | column | Enumeration | .1.3.6.1.4.1.2011.5.14.4.1.1.5 |
| hwLanBoardExtBroadcastControl Traffic suppression of broadcast packet control, in unit of packet/second. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.4.1.1.6 |
| hwLanBoardExtLowPriorityRatio Default low priority use for filling 802.1p field in ethernet packet upstream. | column | Integer32 | .1.3.6.1.4.1.2011.5.14.4.1.1.7 |
| hwLanBoardExtHighPriorityRatio Default high priority use for filling 802.1p field in ethernet packet upstream. | column | Integer32 | .1.3.6.1.4.1.2011.5.14.4.1.1.8 |
| hwLanBoardExtGMIIPauseFrameControl Indicates if the LAN board support the function of priority control.
Options:
1. enabled(1) -The LAN board can support the function of priority control.
2. disabled(2) -The LAN… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.4.1.1.9 |