HP-SN-SWITCH-GROUP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
29
Rows
29
Columns
275

snVLanByPortTable

table deprecated
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1 · 1 row entry · 28 columns
Open in standard view 
If snSwGroupOperMode is configured as basic mode
which is VLAN by Port, Layer2 switching,
then this table is valid.  Each VLAN switch port
could have a number of VLAN IDs.
snVLanByPortEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1
An entry in the VLAN By Port Information table.
snVLanByPortVLanIndex = 1 and with
snVLanByPortVLanId = 1 together implies all attributes
applying to the Global switch group i.e. noVLan.
A SNMP SET PDU for a row of the…
Indexes
snVLanByPortVLanIndex
Column Syntax OID
snVLanByPortVLanIndex deprecated
The VLAN ID index must not be greater than the
snVLanGroupVlanMaxEntry. Each VLAN Identifier can
have a membership of multiple ports.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.1
snVLanByPortVLanId deprecated
The VLAN ID index to the VLAN By Port Info Table.
Each VLAN Identifier can have a membership of multiple
ports.
Integer32r/w
Constraints:
range: 1-4095
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.2
snVLanByPortPortMask deprecated
The Standand-alone switch VLAN port membership. (It was obsoleted for Chassis Product)
PortMaskr/w
Textual Convention: PortMask Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.3
snVLanByPortQos deprecated
The Stand alone stackable switch VLAN Priority values are:
low(0) -- low prority
high(1) -- high prority.
The BigIron switch VLAN Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5), …
Enumerationr/w
Enumerated Values:
0level0
1level1
2level2
3level3
4level4
5level5
6level6
7level7
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.4
snVLanByPortStpMode deprecated
Spanning Tree Mode in the Switch Group can be set
either enabled or disabled and the default is
enabled mode.
enabled(1)...........activate Spanning Tree
disabled(0)..........no Spanning Tree
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.5
snVLanByPortStpPriority deprecated
dot1dStpPriority : The value of the write-able
portion of the Stp ID, i.e., the first two octets
of the (8 octet long) Bridge ID. The other (last) 6
octets of the Bridge ID are given by the value of the
base bridge…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.6
snVLanByPortStpGroupMaxAge deprecated
dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB).
The value that all bridges use for MaxAge when
this bridge is acting as the root.
Note that 802.1D-1990 specifies that the
range for this parameter is related to the va…
Integer32r/w
Constraints:
range: 6-40
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.7
snVLanByPortStpGroupHelloTime deprecated
dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB).
The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An age…
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.8
snVLanByPortStpGroupForwardDelay deprecated
dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB).
The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is relate…
Integer32r/w
Constraints:
range: 2-30
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.9
snVLanByPortRowStatus deprecated
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisti…
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
5modify
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.10
snVLanByPortOperState deprecated
By default, this mode is set to notActivated(0).
notActivated(0)...the VLAN entry is not activated and not in running mode.
activated(1)......the VLAN entry is activated and in running mode
Enumeration
Enumerated Values:
0notActivated
1activated
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.11
snVLanByPortBaseNumPorts deprecated
The number of ports controlled by this bridging
entity.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.12
snVLanByPortBaseType deprecated
Indicates what type of bridging this bridge can
perform. If a bridge is actually performing a
certain type of bridging this will be indicated by
entries in the port table for the given type.
Enumeration
Enumerated Values:
1unknown
2transparent-only
3sourceroute-only
4srt
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.13
snVLanByPortStpProtocolSpecification deprecated
An indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
fut…
Enumeration
Enumerated Values:
1unknown
2decLb100
3ieee8021d
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.14
snVLanByPortStpMaxAge deprecated
dot1dStpMaxAge: From RFC1493(Bridge MIB).
The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value …
Timeout
Textual Convention: Timeout Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.15
snVLanByPortStpHelloTime deprecated
dot1dStpHelloTime: From RFC1493(Bridge MIB).
The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of…
Timeout
Textual Convention: Timeout Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.16
snVLanByPortStpHoldTime deprecated
dot1dStpHoldTime: From RFC1493(Bridge MIB).
This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.17
snVLanByPortStpForwardDelay deprecated
dot1dStpForwardDelay: From RFC1493(Bridge MIB).
This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value dete…
Timeout
Textual Convention: Timeout Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.18
snVLanByPortStpTimeSinceTopologyChange deprecated
The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.19
snVLanByPortStpTopChanges deprecated
The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.20
snVLanByPortStpRootCost deprecated
dot1dStpRootCost: From RFC1493(Bridge MIB).
The cost of the path to the root as seen from
this bridge.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.21
snVLanByPortStpRootPort deprecated
dot1dStpRootPort: From RFC1493(Bridge MIB).
The port number of the port which offers the
lowest cost path from this bridge to the root
bridge.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.22
snVLanByPortStpDesignatedRoot deprecated
dot1dStpDesignatedRoot: From RFC1493(Bridge MIB).
The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier p…
BridgeId
Textual Convention: BridgeId OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.23
snVLanByPortBaseBridgeAddress deprecated
The MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only req…
MacAddress
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.24
snVLanByPortVLanName deprecated
VLAN Community Name string.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.25
snVLanByPortRouterIntf deprecated
Optional: A virtual interface for router to the VLAN -- applied to router only.
If a SNMP-Get value is zero, that means this object was not configured.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.26
snVLanByPortChassisPortMask deprecated
The Chassis VLAN switch port membership.
(It was obsoleted after release 07100, replaced by snVLanByPortPortList)
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.27
snVLanByPortPortList deprecated
A list of port indices which are the port
membership of a VLAN By Port. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.
OctetStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.28

snVLanByProtocolTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2 · 1 row entry · 15 columns
Open in standard view 
.
snVLanByProtocolEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1
An entry in the VLAN By Protocol Configuration table.
Indexes
snVLanByProtocolVLanId snVLanByProtocolIndex
Column Syntax OID
snVLanByProtocolVLanId
The VLAN ID index to both of the VLAN By Port Info Table
and this table.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.1
snVLanByProtocolIndex
The following IP/IPX protocol VLAN types are operated
in Layer3 VLAN such as : ip(1), ipx(2), ipv6(7)
The following are operated in Layer2 bridging such as:
appleTalk(3), decNet(4), netBios(5),
others(6) -- other proto…
Enumeration
Enumerated Values:
1ip
2ipx
3appleTalk
4decNet
5netBios
6others
7ipv6
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.2
snVLanByProtocolDynamic
disabled(0) : disabled dynamic port inclusion - applied to switch only.
enabled(1) : enabled dynamic port inclusion - applied to switch only.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.3
snVLanByProtocolStaticMask deprecated
The Standand-alone switch Protocol VLAN port membership applied in static mode.
(It was obsoleted for Chassis Product)
PortMaskr/w
Textual Convention: PortMask Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.4
snVLanByProtocolExcludeMask deprecated
The Standand-alone switch Protocol VLAN port membership applied in exclusive mode.
(It was obsoleted for Chassis Product)
PortMaskr/w
Textual Convention: PortMask Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.5
snVLanByProtocolRouterIntf
Optional: A virtual interface for router to the VLAN -- applied to router only.
If a SNMP-Get value is zero, that means this object was not configured.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.6
snVLanByProtocolRowStatus
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisti…
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
5modify
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.7
snVLanByProtocolDynamicMask deprecated
The Standand-alone switch Protocol VLAN active port membership.
(It was obsoleted for Chassis Product)
PortMask
Textual Convention: PortMask Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.8
snVLanByProtocolChassisStaticMask deprecated
The Chassis Protocol VLAN port membership applied in static mode.
(It was obsoleted after release 07100, replaced by snVLanByProtocolStaticPortList)
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.9
snVLanByProtocolChassisExcludeMask deprecated
The Chassis Protocol VLAN port membership applied in exclusive mode.
(It was obsoleted after release 07100, replaced by snVLanByProtocolExcludePortList)
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.10
snVLanByProtocolChassisDynamicMask deprecated
The Chassis Protocol VLAN active port membership.
(It was obsoleted after release 07100, replaced by snVLanByProtocolDynamicPortList)
OctetString
Constraints:
range: 32-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.11
snVLanByProtocolVLanName
VLAN Community Name string.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.12
snVLanByProtocolStaticPortList
A list of port indices which are the configured port
membership of the Protocol VLAN. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.
OctetStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.13
snVLanByProtocolExcludePortList
A list of port indices which are the excluded from port
membership of the Protocol VLAN. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.
OctetStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.14
snVLanByProtocolDynamicPortList
A list of port indices which are dynamically joining the port
membership of the Protocol VLAN. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.
OctetString .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.15

snVLanByIpSubnetTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3 · 1 row entry · 16 columns
Open in standard view 
An entry of the VLAN By IPX Network Number Table.
snVLanByIpSubnetEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1
An entry in the VLAN By IP Subnet Configuration table.
Indexes
snVLanByIpSubnetVLanId snVLanByIpSubnetIpAddress snVLanByIpSubnetSubnetMask
Column Syntax OID
snVLanByIpSubnetVLanId
The VLAN ID index to both of the VLAN By Port Info Table
and this table.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.1
snVLanByIpSubnetIpAddress
Subnet IP address.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.2
snVLanByIpSubnetSubnetMask
Subnet mask associated with the Subnet IP address.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.3
snVLanByIpSubnetDynamic
disabled(0) : disabled dynamic port inclusion - applied to switch only.
enabled(1) : enabled dynamic port inclusion - applied to switch only.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.4
snVLanByIpSubnetStaticMask deprecated
The Standand-alone switch VLAN By Subnet port membership applied in static mode.
(It was obsoleted for Chassis Product)
PortMaskr/w
Textual Convention: PortMask Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.5
snVLanByIpSubnetExcludeMask deprecated
The Standand-alone switch VLAN By Subnet port membership applied in exclusive mode.
(It was obsoleted for Chassis Product)
PortMaskr/w
Textual Convention: PortMask Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.6
snVLanByIpSubnetRouterIntf
Optional: A virtual interface for router to the VLAN -- applied to router only.
If a SNMP-Get value is zero, that means this object was not configured.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.7
snVLanByIpSubnetRowStatus
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisti…
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
5modify
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.8
snVLanByIpSubnetDynamicMask deprecated
The Standand-alone switch VLAN By Subnet active port membership.
(It was obsoleted for Chassis Product)
PortMask
Textual Convention: PortMask Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.9
snVLanByIpSubnetChassisStaticMask deprecated
The Chassis VLAN By Subnet port membership applied in static mode.
(It was obsoleted after release 07100, replaced by snVLanByIpSubnetStaticPortList)
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.10
snVLanByIpSubnetChassisExcludeMask deprecated
The Chassis VLAN By Subnet port membership applied in exclusive mode.
(It was obsoleted after release 07100, replaced by snVLanByIpSubnetExcludePortList)
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.11
snVLanByIpSubnetChassisDynamicMask deprecated
The Chassis VLAN By Subnet active port membership.
(It was obsoleted after release 07100, replaced by snVLanByIpSubnetDynamicPortList)
OctetString
Constraints:
range: 32-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.12
snVLanByIpSubnetVLanName
VLAN Community Name string.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.13
snVLanByIpSubnetStaticPortList
A list of port indices which are the configured port
membership of the VLAN By IP Subnet. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.
OctetStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.14
snVLanByIpSubnetExcludePortList
A list of port indices which are the excluded from port
membership of the VLAN By IP Subnet. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.
OctetStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.15
snVLanByIpSubnetDynamicPortList
A list of port indices which are dynamically joining the port
membership of the VLAN By IP Subnet. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.
OctetString .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.16

snVLanByIpxNetTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4 · 1 row entry · 16 columns
Open in standard view 
An entry of the VLAN By IPX Network Number Table.
snVLanByIpxNetEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1
An entry in the VLAN By Ipx Network Number Configuration table.
Indexes
snVLanByIpxNetVLanId snVLanByIpxNetNetworkNum snVLanByIpxNetFrameType
Column Syntax OID
snVLanByIpxNetVLanId
The VLAN ID index to both of the VLAN By Port Info Table
and this table.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.1
snVLanByIpxNetNetworkNum
IPX Network Number.
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.2
snVLanByIpxNetFrameType
The following IPX Frame types are operated
in Layer3 VLAN such as :
ipxEthernet8022(1), ipxEthernet8023(2),
ipxEthernetII(3), ipxEthernetSnap(4).
choose notApplicable(0) for other protocols.
Note: Each Network Number…
Enumeration
Enumerated Values:
0notApplicable
1ipxEthernet8022
2ipxEthernet8023
3ipxEthernetII
4ipxEthernetSnap
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.3
snVLanByIpxNetDynamic
disabled(0) : disabled dynamic port inclusion - applied to switch only.
enabled(1) : enabled dynamic port inclusion - applied to switch only.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.4
snVLanByIpxNetStaticMask deprecated
The VLAN By IPX network port membership applied in static mode.
(It was obsoleted for Chassis Product)
PortMaskr/w
Textual Convention: PortMask Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.5
snVLanByIpxNetExcludeMask deprecated
The VLAN By IPX network port membership applied in exclusive mode.
(It was obsoleted for Chassis Product)
PortMaskr/w
Textual Convention: PortMask Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.6
snVLanByIpxNetRouterIntf
Optional: A virtual interface for router to the VLAN -- applied to router only.
If a SNMP-Get value is zero, that means this object was not configured.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.7
snVLanByIpxNetRowStatus
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisti…
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
5modify
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.8
snVLanByIpxNetDynamicMask deprecated
The VLAN By IPX network active port membership.
(It was obsoleted for Chassis Product)
PortMask
Textual Convention: PortMask Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.9
snVLanByIpxNetChassisStaticMask deprecated
The Chassis VLAN By IPX network port membership applied in static mode.
(It was obsoleted after release 07100, replaced by snVLanByIpxNetStaticPortList)
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.10
snVLanByIpxNetChassisExcludeMask deprecated
The Chassis VLAN By IPX network port membership applied in exclusive mode.
(It was obsoleted after release 07100, replaced by snVLanByIpxNetExcludePortList)
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.11
snVLanByIpxNetChassisDynamicMask deprecated
The Chassis VLAN By IPX network active port membership.
(It was obsoleted after release 07100, replaced by snVLanByIpxNetDynamicPortList)
OctetString
Constraints:
range: 32-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.12
snVLanByIpxNetVLanName
VLAN Community Name string.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.13
snVLanByIpxNetStaticPortList
A list of port indices which are the configured port
membership of the VLAN By IPX network. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.
OctetStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.14
snVLanByIpxNetExcludePortList
A list of port indices which are the excluded from port
membership of the VLAN By IPX network. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.
OctetStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.15
snVLanByIpxNetDynamicPortList
A list of port indices which are dynamically joining the port
membership of the VLAN By IPX network. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.
OctetString .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.16

snVLanByATCableTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5 · 1 row entry · 7 columns
Open in standard view 
A Table Of VLAN By AppleTalk Network Number.
snVLanByATCableEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1
An entry of the AppleTalk Cable VLAN table.
Indexes
snVLanByATCableVLanId snVLanByATCableIndex
Column Syntax OID
snVLanByATCableVLanId
The VLAN ID of a PORT VLAN of which the AppleTalk Cable
VLAN was attaching to.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.1
snVLanByATCableIndex
AppleTalk Cable VLAN index number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.2
snVLanByATCableRouterIntf
A virtual router interface to the AppleTalk Cable VLAN,
only router products accept the SNMP-SET operation. The
value zero indicates that virtual router interface was
not configured.
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.3
snVLanByATCableRowStatus
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisti…
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
5modify
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.4
snVLanByATCableChassisStaticMask deprecated
A list of ports which are statically configured to
become port members of a VLAN.
(It was obsoleted after release 07100, replaced by snVLanByATCableStaticPortList)
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.5
snVLanByATCableVLanName
VLAN Name string.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.6
snVLanByATCableStaticPortList
A list of port indices which are the configured port
membership of the AppleTalk Cable VLAN. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.
OctetStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.7

snVLanByPortMemberTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6 · 1 row entry · 3 columns
Open in standard view 
Port VLAN (Layer 2 VLAN) port membership table.
snVLanByPortMemberEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6.1
An entry of the port VLAN membership table.
Indexes
snVLanByPortMemberVLanId snVLanByPortMemberPortId
Column Syntax OID
snVLanByPortMemberVLanId
The VLAN identifier (VLAN ID).
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6.1.1
snVLanByPortMemberPortId
The ifIndex which is a member of the port VLAN.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6.1.2
snVLanByPortMemberRowStatus
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row

If the row exists,…
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6.1.3

snVLanByPortCfgTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7 · 1 row entry · 23 columns
Open in standard view 
Port VLAN (Layer 2 VLAN) configuration table.
snVLanByPortCfgEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1
An entry of the port VLAN configuration table.
Indexes
snVLanByPortCfgVLanId
Column Syntax OID
snVLanByPortCfgVLanId
The VLAN identifier (VLAN ID).
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.1
snVLanByPortCfgQos
The Stand alone stackable switch VLAN Priority values are:
level0(0) -- low prority
level1(1) -- high prority.
The BigIron switch VLAN Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5…
Enumerationr/w
Enumerated Values:
0level0
1level1
2level2
3level3
4level4
5level5
6level6
7level7
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.2
snVLanByPortCfgStpMode
Spanning Tree Mode in the Switch Group can be set
either enabled or disabled and the default is
enabled mode.
enabled(1)...........activate Spanning Tree
disabled(0)..........no Spanning Tree
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.3
snVLanByPortCfgStpPriority
dot1dStpPriority : The value of the write-able
portion of the Stp ID, i.e., the first two octets
of the (8 octet long) Bridge ID. The other (last) 6
octets of the Bridge ID are given by the value of the
base bridge…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.4
snVLanByPortCfgStpGroupMaxAge
dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB).
The value that all bridges use for MaxAge when
this bridge is acting as the root.
Note that 802.1D-1990 specifies that the
range for this parameter is related to the va…
Integer32r/w
Constraints:
range: 6-40
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.5
snVLanByPortCfgStpGroupHelloTime
dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB).
The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An age…
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.6
snVLanByPortCfgStpGroupForwardDelay
dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB).
The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is relate…
Integer32r/w
Constraints:
range: 2-30
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.7
snVLanByPortCfgBaseNumPorts
The number of ports controlled by this bridging
entity.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.8
snVLanByPortCfgBaseType
Indicates what type of bridging this bridge can
perform. If a bridge is actually performing a
certain type of bridging this will be indicated by
entries in the port table for the given type.
Enumeration
Enumerated Values:
1unknown
2transparent-only
3sourceroute-only
4srt
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.9
snVLanByPortCfgStpProtocolSpecification
An indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
fut…
Enumeration
Enumerated Values:
1unknown
2decLb100
3ieee8021d
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.10
snVLanByPortCfgStpMaxAge
dot1dStpMaxAge: From RFC1493(Bridge MIB).
The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value …
Timeout
Textual Convention: Timeout Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.11
snVLanByPortCfgStpHelloTime
dot1dStpHelloTime: From RFC1493(Bridge MIB).
The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of…
Timeout
Textual Convention: Timeout Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.12
snVLanByPortCfgStpHoldTime
dot1dStpHoldTime: From RFC1493(Bridge MIB).
This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.13
snVLanByPortCfgStpForwardDelay
dot1dStpForwardDelay: From RFC1493(Bridge MIB).
This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value dete…
Timeout
Textual Convention: Timeout Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.14
snVLanByPortCfgStpTimeSinceTopologyChange
The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.15
snVLanByPortCfgStpTopChanges
The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.16
snVLanByPortCfgStpRootCost
dot1dStpRootCost: From RFC1493(Bridge MIB).
The cost of the path to the root as seen from
this bridge.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.17
snVLanByPortCfgStpRootPort
dot1dStpRootPort: From RFC1493(Bridge MIB).
The port number of the port which offers the
lowest cost path from this bridge to the root
bridge.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.18
snVLanByPortCfgStpDesignatedRoot
dot1dStpDesignatedRoot: From RFC1493(Bridge MIB).
The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier p…
BridgeId
Textual Convention: BridgeId OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.19
snVLanByPortCfgBaseBridgeAddress
The MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only req…
MacAddress
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.20
snVLanByPortCfgVLanName
VLAN Community Name string.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.21
snVLanByPortCfgRouterIntf
Optional: A virtual interface for router to the VLAN -- applied to router only.
If a SNMP-Get value is zero, that means this object was not configured.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.22
snVLanByPortCfgRowStatus
Use object to delete a vlan entry.
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.23

snSwPortInfoTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1 · 1 row entry · 57 columns
Open in standard view 
A specific snSwPortInfo group consists of a number of 
switch ports.
snSwPortInfoEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1
An entry in the snSwPortInfo table indicates the
configuration on a specified port. A SNMP SET PDU
for a row of the snSwPortInfoTable requires the entired
sequence of the MIB Objects in each
snSwPortInfoEntry stored…
Indexes
snSwPortInfoPortNum
Column Syntax OID
snSwPortInfoPortNum
The port index.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number (slot for chassis only).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.1
snSwPortInfoMonitorMode
A monitoring port is selected and its traffic will be
analyzed if the mode is not disabled(0), which is
the default mode.
The values are:

disabled(0) -- No traffic monitoring
input(1) -- traffic monitori…
Enumerationr/w
Enumerated Values:
0disabled
1input
2output
3both
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.2
snSwPortInfoTagMode
For tagged port, we could have multiple VLANs
per port. For untagged port or auto port, there
is only one VLAN ID per port.
Enumerationr/w
Enumerated Values:
1tagged
2untagged
3auto
4disabled
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.3
snSwPortInfoChnMode
The port can be configured to operate in either
half or full duplex mode. The values are:
halfDuplex(1)...half duplex mode
fullDuplex(2)...full duplex mode
The read-back channel status from hardware are:
none(0)......…
Enumerationr/w
Enumerated Values:
0none
1halfDuplex
2fullDuplex
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.4
snSwPortInfoSpeed
The speed configuration for a port. The values are:
none(0)..........link down or no traffic.
sAutoSense(1)....Auto-sensing 10 or 100Mbits.
s10M(2)..........10Mbits per second.
s100M(3).........100Mbits per sec…
Enumerationr/w
Enumerated Values:
0none
1sAutoSense
2s10M
3s100M
4s1G
5s45M
6s155M
7s10G
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.5
snSwPortInfoMediaType
The media type for the port. The
values are:
other(1).........other or unknown media.
m100BaseTX(2)....100Mbits per second copper.
m100BaseFX(3)....100Mbits per second fiber.
m1000BaseFX(4)...1Gbits per second f…
Enumeration
Enumerated Values:
1other
2m100BaseTX
3m100BaseFX
4m1000BaseFX
5mT3
6m155ATM
7m1000BaseTX
8m622ATM
9m155POS
10m622POS
11m2488POS
12m10000BaseFX
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.6
snSwPortInfoConnectorType
The type of connector that the port offers.
The values are:
other(1)...........other or unknown connector
copper(2)..........Copper connector
fiber(3)...........Fiber connector
This describes the physical connector t…
Enumeration
Enumerated Values:
1other
2copper
3fiber
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.7
snSwPortInfoAdminStatus
The desired state of all ports. The
testing(3) state indicates that no operational
packets can be passed.
(same as ifAdminStatus in MIB-II)
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.8
snSwPortInfoLinkStatus
The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
(same as ifOperStatus in MIB-II)
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.9
snSwPortInfoPortQos
The Stand alone stackable switch Port Qos Priority values are:
low(0) -- low prority
high(1) -- high prority.
The BigIron Port Qos Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5),…
Enumerationr/w
Enumerated Values:
0level0
1level1
2level2
3level3
4level4
5level5
6level6
7level7
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.10
snSwPortInfoPhysAddress
The port physical address. The physical address
represents the switch port.
PhysAddress
Textual Convention: PhysAddress OctetString
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.11
snSwPortStatsInFrames
The total number of packets received on the interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.12
snSwPortStatsOutFrames
The total number of packets transmitted out of the interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.13
snSwPortStatsAlignErrors
dot3StatsAlignmentErrors : A count of frames
received on a particular interface that are
not an integral number of octets in length
and do not pass the FCS check.

The count represented by an instance o…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.14
snSwPortStatsFCSErrors
dot3StatsFCSErrors : A count of frames received
on a particular interface that are an integral
number of octets in length but do not pass the
FCS check.

The count represented by an instance of this
obj…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.15
snSwPortStatsMultiColliFrames
dot3StatsMultipleCollisionFrames :
A count of successfully transmitted frames on
a particular interface for which transmission
is inhibited by more than one collision.

A frame that is counted by an insta…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.16
snSwPortStatsFrameTooLongs
dot3StatsFrameTooLongs : A count of frames
received on a particular interface that
exceed the maximum permitted frame size.

The count represented by an instance of this
object is incremented when the fr…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.17
snSwPortStatsTxColliFrames
A count of successfully transmitted frames on
a particular interface for which transmission
is inhibited by more than one collision.

A frame that is counted by a combination of
both dot3StatsSingleCollisi…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.18
snSwPortStatsRxColliFrames
A count of successfully received frames on
a particular interface for which transmission
is inhibited by more than one collision. This
object is not specified in dot3 but it has the
same functionarity as snSwPortStatsT…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.19
snSwPortStatsFrameTooShorts
A count of frames received on a particular
interface that below the minimum permitted
frame size.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.20
snSwPortLockAddressCount
The number of source MAC addresses are allowed
for a port. Writing 0 to this object will allow
any number of addresses.
Integer32r/w
Constraints:
range: 0-2048
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.21
snSwPortStpPortEnable
The enabled/disabled status of the port.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.22
snSwPortDhcpGateListId
The ID for a DHCP gateway list entry relative
to this switch port. 0 = unset or no assigned ID
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.23
snSwPortName
Port Name string.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.24
snSwPortStatsInBcastFrames
The total number of broadcast packets received on the interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.25
snSwPortStatsOutBcastFrames
The total number of broadcast packets transmitted out of the interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.26
snSwPortStatsInMcastFrames
The total number of multicast packets received on the interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.27
snSwPortStatsOutMcastFrames
The total number of multicast packets transmitted out of the interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.28
snSwPortStatsInDiscard
The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet co…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.29
snSwPortStatsOutDiscard
The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer s…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.30
snSwPortStatsMacStations
The total number of MAC Stations connected to the interface.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.31
snSwPortCacheGroupId
Cache Group ID for the interface.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.32
snSwPortTransGroupId
Transparent Group ID for the interface.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.33
snSwPortInfoAutoNegotiate
This feature only applies to Gigabit Ethernet ports. If set to
disable(0), port will be put to non-negotiation mode. If set to
enable(1), port will start auto-negotiation indefinitely until
succeed. If set to negFullAut…
Enumerationr/w
Enumerated Values:
0disabled
1enabled
2negFullAuto
3global
4other
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.34
snSwPortInfoFlowControl
Enable/Disbale port flow control.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.35
snSwPortInfoGigType
The media type for the port. The
values are:
m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver.
m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km).
m10…
Enumeration
Enumerated Values:
0m1000BaseSX
1m1000BaseLX
2m1000BaseLH
3m1000BaseLHA
4m1000BaseLHB
5m1000BaseTX
6m10000BaseSR
7m10000BaseLR
8m10000BaseER
255notApplicable
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.36
snSwPortStatsLinkChange
The total number of link state change of the interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.37
snSwPortIfIndex
In order to identify a particular interface, this
object shall identify the instance of the ifIndex
object, defined in RFC 1213 and RFC 1573.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.38
snSwPortDescr
A textual string containing the slot/port information
about the interface.
DisplayString
Textual Convention: DisplayString OctetString
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.39
snSwPortInOctets
The total number of octets received on the interface,
including framing characters. This object is a 64-bit
counter of the ifInOctets object, defined in RFC 1213.
The octet string is in big-endian byte order.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.40
snSwPortOutOctets
The total number of octets transmitted out of the interface,
including framing characters. This object is a 64-bit
counter of the ifOutOctets object, defined in RFC 1213.
The octet string is in big-endian byte order.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.41
snSwPortStatsInBitsPerSec
The number of bits per second received on the interface
over a 5 minutes interval.
RFC1155-SMIGauge
Textual Convention: RFC1155-SMIGauge Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.42
snSwPortStatsOutBitsPerSec
The number of bits per second transmitted out of the interface
over a 5 minutes interval.
RFC1155-SMIGauge
Textual Convention: RFC1155-SMIGauge Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.43
snSwPortStatsInPktsPerSec
The number of packets per second received on the interface
over a 5 minutes interval.
RFC1155-SMIGauge
Textual Convention: RFC1155-SMIGauge Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.44
snSwPortStatsOutPktsPerSec
The number of packets per second transmitted out of the interface
over a 5 minutes interval.
RFC1155-SMIGauge
Textual Convention: RFC1155-SMIGauge Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.45
snSwPortStatsInUtilization
The input network utilization in hundredths of a percent
over a 5 minutes interval.
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.46
snSwPortStatsOutUtilization
The output network utilization in hundredths of a percent
over a 5 minutes interval.
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.47
snSwPortFastSpanPortEnable
The enabled/disabled fast span port status of the port.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.48
snSwPortFastSpanUplinkEnable
The enabled/disabled fast span uplink status of the port.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.49
snSwPortVlanId
The ID of a VLAN of which this port is a member. Port must
be untagged. For tagged port which belongs to multiple
VLANs, this object return 0 which is an invalid VLAN ID
value.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.50
snSwPortRouteOnly
Enable/Disable L2 switching of a routing switch port.
By default, the routing switch performs routing first.
If routing failed, it performs switching. Enable route
only instrcuts the routing switch to perform routing
on…
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.51
snSwPortPresent
Indicate if the port is absent or present.
This object only valid for M4 module
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.52
snSwPortGBICStatus
Indicate if the gig port has GBICs on them.
If set to GBIC(1), it means that the port is GBIC.
If set to miniGBIC(2), it means that the port miniGBIC.
If set to empty(3), it means that the GBIC is missing.
Value other…
Enumeration
Enumerated Values:
1gbic
2miniGBIC
3empty
4other
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.53
snSwPortStatsInKiloBitsPerSec
Bit rate in kilobits per second received on the 10G and faster interface
over a 5 minutes interval.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.54
snSwPortStatsOutKiloBitsPerSec
Bit rate in kilobits per second transmitted out of the 10G and faster interface
over a 5 minutes interval.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.55
snSwPortLoadInterval
The time in seconds for which average port utilization should be carried out.
The value should be incremental of 30 seconds, between the ranges specified.
Integer32r/w
Constraints:
range: 30-300
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.56
snSwPortTagType
The IEEE802.1q tag type embedded in the length/type field of
an Ethernet packet. It specifies that the 2 octets after the
length/type field in an Ethernet packet is the tag value.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.57

snInterfaceLookupTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.3 · 1 row entry · 2 columns
Open in standard view
snInterfaceLookupEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.3.1
Indexes
snInterfaceLookupInterfaceId
Column Syntax OID
snInterfaceLookupInterfaceId InterfaceId
Textual Convention: InterfaceId ObjectIdentifier
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.3.1.1
snInterfaceLookupIfIndex Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.3.1.2

snIfIndexLookupTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.4 · 1 row entry · 2 columns
Open in standard view
snIfIndexLookupEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.4.1
Indexes
snIfIndexLookupIfIndex
Column Syntax OID
snIfIndexLookupIfIndex Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.4.1.1
snIfIndexLookupInterfaceId InterfaceId
Textual Convention: InterfaceId ObjectIdentifier
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.4.1.2

snFdbTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1 · 1 row entry · 7 columns
Open in standard view 
This table contains snFdb information for each station
known to the system, one entry per station.
snFdbEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1
Each entry represents the information of a static MAC station.
Indexes
snFdbStationIndex
Column Syntax OID
snFdbStationIndex
The FDB Station index to the Fdb Station Table.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.1
snFdbStationAddr
The snFdbs physical address. The physical address
represents a MAC Station.
PhysAddressr/w
Textual Convention: PhysAddress OctetString
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.2
snFdbStationPort
Station slot/port number.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number (slot for chassis only).
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.3
snFdbVLanId
The Station VLan ID.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.4
snFdbStationQos
The Stand alone stackable station Qos Priority values are:
low(0) -- low prority
high(1) -- high prority.
The BigIron switch station Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5…
Enumerationr/w
Enumerated Values:
0level0
1level1
2level2
3level3
4level4
5level5
6level6
7level7
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.5
snFdbStationType
The station type values are:
notSupported -- a read value only : this product does not
support MultiLayer Switching.
host -- any MAC station.
router -- a router-typed station.
Enumerationr/w
Enumerated Values:
0notSupported
1host
2router
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.6
snFdbRowStatus
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row

If the row exists,…
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.7

snPortStpTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1 · 1 row entry · 12 columns
Open in standard view 
A specific snPortStpTable consists of a number of 
switch ports. This table only exists if only if
snVLanByPortTable exists and snVLanByPortStpMode is
enabled for each VLAN.
snPortStpEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1
An entry in the snPortStpTable indicates the
configuration on a specified port. A SNMP SET PDU
for a row of the snPortStpTable requires the entired
sequence of the MIB Objects in each
snPortStpEntry stored in one PD…
Indexes
snPortStpVLanId snPortStpPortNum
Column Syntax OID
snPortStpVLanId
The VLAN ID of the VLAN switch community.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.1
snPortStpPortNum
The port number of the Switch.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number (slot for chassis only).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.2
snPortStpPortPriority
The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
dot1dStpPort.
Integer32r/w
Constraints:
range: 8-255
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.3
snPortStpPathCost
dot1dStpPortPathCost : The contribution of this
port to the path cost of paths towards the spanning
tree root which include this port. 802.1D-1990
recommends that the default value of this parameter
be in inverse p…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.4
snPortStpOperState
By default, this mode is set to notActivated(0).
notActivated(0)...the Port STP entry is not activated and not in running mode.
activated(1)......the Port STP entry is activated and in running mode
Enumeration
Enumerated Values:
0notActivated
1activated
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.5
snPortStpPortEnable
The enabled/disabled status of the port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.6
snPortStpPortForwardTransitions
The number of times this port has transitioned
from the Learning state to the Forwarding state.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.7
snPortStpPortState
The port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will …
Enumeration
Enumerated Values:
1disabled
2blocking
3listening
4learning
5forwarding
6broken
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.8
snPortStpPortDesignatedCost
The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.9
snPortStpPortDesignatedRoot
The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.
BridgeId
Textual Convention: BridgeId OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.10
snPortStpPortDesignatedBridge
The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.
BridgeId
Textual Convention: BridgeId OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.11
snPortStpPortDesignatedPort
The Port Identifier of the port on the Designated
Bridge for this port's segment.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.12

snTrunkTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1 · 1 row entry · 3 columns
Open in standard view 
A specific snTrunkTable consists of a number of 
Trunk port-mask.
snTrunkEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1.1
An entry in the snTrunkTable indicates the
configuration on a specified Trunk port membership.
Indexes
snTrunkIndex
Column Syntax OID
snTrunkIndex
The number of the trunk entries can be configured.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1.1.1
snTrunkPortMask
Trunk membership of the Switch.
PortMaskr/w
Textual Convention: PortMask Integer32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1.1.2
snTrunkType
The trunk connection type which specifies what
device the trunk ports are connected to.
Enumerationr/w
Enumerated Values:
1switch
2server
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1.1.3

snMSTrunkTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2 · 1 row entry · 4 columns
Open in standard view 
A table contains the configuration of port members of
multi-slot trunk groups.
snMSTrunkEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1
An entry of the snMSTrunkTable.
Indexes
snMSTrunkPortIndex
Column Syntax OID
snMSTrunkPortIndex
The primary port of a trunk group. For module with Gig ports,
primary port is port 1, 3, 5, 7. For module with 10/100 ports,
primary port is port 1, 5, 9, 13, 17, 21.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1.1
snMSTrunkPortList
A list of port indices which are the port membership
of a trunk group. Each port index is a 16-bit integer
in big endian order. The first port index must be the
primary port index.
OctetStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1.2
snMSTrunkType
The trunk connection type which specifies what
device the trunk ports are connected to.
Enumerationr/w
Enumerated Values:
1switch
2server
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1.3
snMSTrunkRowStatus
To create or delete a table entry.
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1.4

snDhcpGatewayListTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1 · 1 row entry · 3 columns
Open in standard view 
A table of DHCP gateway list of addresses.
snDhcpGatewayListEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1.1
An entry in the IP Port Address table.
Indexes
snDhcpGatewayListId
Column Syntax OID
snDhcpGatewayListId
The ID for a DHCP gateway list entry.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1.1.1
snDhcpGatewayListAddrList
The DHCP gateway address list for each DHCP gateway list ID.
This list contains 1 to 8 IP addresses represented by octet string.
OctetStringr/w
Constraints:
range: 4-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1.1.2
snDhcpGatewayListRowStatus
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row or modifies an exsisting row
…
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1.1.3

snMacFilterTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1 · 1 row entry · 10 columns
Open in standard view 
MAC filter table.
snMacFilterEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1
An entry in the MAC filter table.
Indexes
snMacFilterIndex
Column Syntax OID
snMacFilterIndex
The table index for a filter entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.1
snMacFilterAction
Action to take if the Mac packet match
with this filter.
Enumerationr/w
Enumerated Values:
0deny
1permit
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.2
snMacFilterSourceMac
Source MAC address.
MacAddressr/w
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.3
snMacFilterSourceMask
Source MAC subnet mask.
MacAddressr/w
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.4
snMacFilterDestMac
Destination MAC address.
MacAddressr/w
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.5
snMacFilterDestMask
Destination MAC subnet mask.
MacAddressr/w
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.6
snMacFilterOperator
Type of comparison to perform.
Enumerationr/w
Enumerated Values:
0equal
1notEqual
2less
3greater
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.7
snMacFilterFrameType
Frame Type: ethernet-type, LLC and SNAP types
Enumerationr/w
Enumerated Values:
0notUsed
1ethernet
2llc
3snap
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.8
snMacFilterFrameTypeNum
Frame Type Number. 0 means NA
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.9
snMacFilterRowStatus
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.10

snMacFilterPortAccessTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2 · 1 row entry · 3 columns
Open in standard view 
MAC Filter port access table.
snMacFilterPortAccessEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2.1
An entry in the MAC Filter Port access table.
Indexes
snMacFilterPortAccessPortIndex
Column Syntax OID
snMacFilterPortAccessPortIndex
The port index.
For FastIron/NetIron products, port index value is from 1 to 42
For BigIron products, port index is an encoded number:
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number.
For virtual route…
Integer32
Constraints:
range: 1-3900
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2.1.1
snMacFilterPortAccessFilters
1st octet correspond to 1st filter
number and so on.
OctetStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2.1.2
snMacFilterPortAccessRowStatus
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row

If the row exists, the…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2.1.3

snNTPServerTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2 · 1 row entry · 3 columns
Open in standard view 
NTP (Network Time Protocol) server table.
snNTPServerEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2.1
An entry in the NTP server table.
Indexes
snNTPServerIp
Column Syntax OID
snNTPServerIp
NTP server IP address.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2.1.1
snNTPServerVersion
NTP server version.
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2.1.2
snNTPServerRowStatus
To create or delete a NTP server table entry.
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2.1.3

snRadiusServerTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2 · 1 row entry · 6 columns
Open in standard view 
Radius server table.
snRadiusServerEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1
An entry in the Radius server table.
Indexes
snRadiusServerIp
Column Syntax OID
snRadiusServerIp
Radius server IP address.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.1
snRadiusServerAuthPort
Authentication UDP port number.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.2
snRadiusServerAcctPort
Account UDP port number.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.3
snRadiusServerRowStatus
To create or delete a Radius server table entry.
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.4
snRadiusServerRowKey
Authentication key displayed as encrypted text.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.5
snRadiusServerUsage
To allow this server to be dedicated for a particular AAA activity.
Enumerationr/w
Enumerated Values:
1default
2authentication-only
3authorization-only
4accounting-only
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.6

snTacacsServerTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2 · 1 row entry · 5 columns
Open in standard view 
Tacacs server table.
snTacacsServerEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1
An entry in the Tacacs server table.
Indexes
snTacacsServerIp
Column Syntax OID
snTacacsServerIp
Tacacs server IP address.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.1
snTacacsServerAuthPort
Authentication UDP port number.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.2
snTacacsServerRowStatus
To create or delete a Tacacs server table entry.
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.3
snTacacsServerRowKey
Authentication key displayed as encrypted text.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.4
snTacacsServerUsage
To allow this server to be dedicated for a particular AAA activity.
Enumerationr/w
Enumerated Values:
1default
2authentication-only
3authorization-only
4accounting-only
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.5

snQosProfileTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1 · 1 row entry · 4 columns
Open in standard view 
A table contains the configuration of qos profile 
groups.
snQosProfileEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1
An entry of the snQosProfileTable.
Indexes
snQosProfileIndex
Column Syntax OID
snQosProfileIndex
The table index of QOS Profile.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1.1
snQosProfileName
Qos Profile Name string.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1.2
snQosProfileRequestedBandwidth
Qos Profile Requested Bandwidth.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1.3
snQosProfileCalculatedBandwidth
Qos Profile Calculated Bandwidth.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1.4

snQosBindTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2 · 1 row entry · 3 columns
Open in standard view 
A table contains the configuration of 802.1p to qos profile 
binding groups.
snQosBindEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2.1
An entry of the snQosBindTable.
Indexes
snQosBindIndex
Column Syntax OID
snQosBindIndex
The table index of QOS Bind.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2.1.1
snQosBindPriority
QOS bind priority.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2.1.2
snQosBindProfileIndex
QOS Bind Profile Index. This is pointer to the
index of snQosProfile Table.
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2.1.3

snNetFlowCollectorTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2 · 1 row entry · 5 columns
Open in standard view 
A table of each NetFlow collector information.
snNetFlowCollectorEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1
A row in the NetFlow collector table.
Indexes
snNetFlowCollectorIndex
Column Syntax OID
snNetFlowCollectorIndex
The index to the NetFlow collector table.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.1
snNetFlowCollectorIp
The NetFlow collector ip address.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.2
snNetFlowCollectorUdpPort
The NetFlow collector UDP port number.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.3
snNetFlowCollectorSourceInterface
The ifIndex value to specify source port to
export NetFlow packet. Value 0 to indicate
default outgoing port.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.4
snNetFlowCollectorRowStatus
To create or delete a NetFlow collector table entry.
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.5

snNetFlowAggregationTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3 · 1 row entry · 9 columns
Open in standard view 
A table of each NetFlow aggregation scheme information.
snNetFlowAggregationEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1
A row in the NetFlow Aggregation table.
Indexes
snNetFlowAggregationIndex
Column Syntax OID
snNetFlowAggregationIndex
The Aggregation scheme ID
Enumeration
Enumerated Values:
1as
2protocolPort
3destPrefix
4sourcePrefix
5prefix
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.1
snNetFlowAggregationIp
The NetFlow aggregation collector ip address.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.2
snNetFlowAggregationUdpPort
The NetFlow aggregation collector UDP port number.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.3
snNetFlowAggregationSourceInterface
The ifIndex value to specify source port to
export NetFlow aggregation packet.
Value 0 to indicate default outgoing port.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.4
snNetFlowAggregationNumberOfCacheEntries
Number of cache entries for aggregation scheme
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.5
snNetFlowAggregationActiveTimeout
Maximum time an active flow can be in
the aggregation cache
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.6
snNetFlowAggregationInactiveTimeout
Maximum time an inactive flow can be in
the aggregation cache
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.7
snNetFlowAggregationEnable
Enable/disable NetFlow aggregation
for this aggregation scheme.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.8
snNetFlowAggregationRowStatus
To create or delete a NetFlow collector table entry.
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.9

snNetFlowIfTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.4 · 1 row entry · 2 columns
Open in standard view 
A list of interface entries.  The number of entries
is given by the value of ifNumber.
snNetFlowIfEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.4.1
Entry containing the type of switching performed
on that interface.
Indexes
snNetFlowIfIndex
Column Syntax OID
snNetFlowIfIndex
A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initiali…
Integer32
Constraints:
range: 1-65536
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.4.1.1
snNetFlowIfFlowSwitching
To enable/disable flow switching in a particular
interface:
disable (0) - no flow switching
enable (1) - flow switching
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.4.1.2

snSflowCollectorTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2 · 1 row entry · 4 columns
Open in standard view 
Table of all but first sFlow collectors. The first collector can be configured
using sFlowTable in RFC 3176. The RFC cannot be used to configure more
than one sFlow collectors. This table has been created to fill this gap.
snSflowCollectorEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1
A row in the sFlow collector table.
Indexes
snSflowCollectorIndex
Column Syntax OID
snSflowCollectorIndex
The index to the sFlow collector table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1.1
snSflowCollectorIP
The sFlow collector ip address.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1.2
snSflowCollectorUDPPort
The sFlow collector UDP port number.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1.3
snSflowCollectorRowStatus
To create, update or delete a SFlow collector table entry.
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:…
Enumerationr/w
Enumerated Values:
0noSuch
1other
2valid
3delete
4create
5modify
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1.4

snFdpInterfaceTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1 · 1 row entry · 3 columns
Open in standard view 
Status of FDP on the device's interfaces.
snFdpInterfaceEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1.1
An entry in the snFdpInterfaceTable,
having the status of FDP on an interface.
Indexes
snFdpInterfaceIfIndex
Column Syntax OID
snFdpInterfaceIfIndex
ifIndex value of the local interface.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1.1.1
snFdpInterfaceFdpEnable
The flag, whether the Foundry Discovery Protocol
is currently running on this interface. It has no
effect when FDP is disabled (snFdpGlobalRun = FALSE).
Enumerationr/w
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1.1.2
snFdpInterfaceCdpEnable
The flag, whether the Cisco Discovery Protocol
is currently running on this interface. It has no
effect when CDP is disabled (snCdpGlobalRun = FALSE).
Enumerationr/w
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1.1.3

snFdpCacheTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1 · 1 row entry · 15 columns
Open in standard view 
The table for the cached information obtained
via receiving FDP/CDP messages.
snFdpCacheEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1
An entry in the snFdpCacheTable, having the information
received via FDP/CDP on one interface from one device.
Entries appear when a FDP/CDP advertisement is received
from a neighbor device.
Entries disappear when FD…
Indexes
snFdpCacheIfIndex snFdpCacheDeviceIndex
Column Syntax OID
snFdpCacheIfIndex
ifIndex value of the local interface.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.1
snFdpCacheDeviceIndex
Identification of a device, which sent FDP/CDP messages
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.2
snFdpCacheDeviceId
The Device-ID string as reported in the most recent FDP/CDP
message. The zero-length string indicates no Device-ID
field (TLV) was reported in the most recent FDP/CDP
message.
DisplayString
Textual Convention: DisplayString OctetString
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.3
snFdpCacheAddressType
An indication of the type of address contained in the
corresponding instance of snFdpCacheAddress.
Enumeration
Enumerated Values:
1ip
2ipx
3appletalk
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.4
snFdpCacheAddress
The (first) network-layer address of the device
as reported in the most recent FDP/CDP message
in the following format:
IP address: 4 octets, ip(1)
IPX address: 10 octets, ipx(2)
First 4-octet as the net…
OctetString .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.5
snFdpCacheVersion
Version string as reported in the most recent FDP/CDP message.
DisplayString
Textual Convention: DisplayString OctetString
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.6
snFdpCacheDevicePort
The Port-ID string as reported in the most recent FDP/CDP
message. This will typically be the value of the ifName
object (e.g., Ethernet0). The zero-length string
indicates no Port-ID field (TLV) was reported in the
m…
DisplayString
Textual Convention: DisplayString OctetString
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.7
snFdpCachePlatform
The Device's Hardware Platform as reported in the most
recent FDP/CDP message. The zero-length string indicates
that no Platform field (TLV) was reported in the most
recent FDP/CDP message.
DisplayString
Textual Convention: DisplayString OctetString
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.8
snFdpCacheCapabilities
The Device's Functional Capabilities as reported in the
most recent FDP/CDP message.
DisplayString
Textual Convention: DisplayString OctetString
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.9
snFdpCacheVendorId
Indicates the entry received by either FDP or CDP.
Enumeration
Enumerated Values:
1fdp
2cdp
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.10
snFdpCacheIsAggregateVlan
Neighbor device is in aggregated-vlan.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.11
snFdpCacheTagType
Neighbor device tag-type.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.12
snFdpCachePortVlanMask
Neighbor device port VLAN masks in 512-byte octet string.
OctetString .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.13
snFdpCachePortTagMode
Neighbor device port tag mode
Enumeration
Enumerated Values:
1untagged
2tagged
3dual
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.14
snFdpCacheDefaultTrafficeVlanIdForDualMode
Default traffic vlan id for neighbor device dual-mode port
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.15

snFdpCachedAddressTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1 · 1 row entry · 5 columns
Open in standard view 
Cached address table from receiving FDP/CDP messages.
snFdpCachedAddressEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1
An entry (conceptual row) in the snFdpCacheAddressTable,
containing one cached address from FDP/CDP messages.
Indexes
snFdpCachedAddrIfIndex snFdpCachedAddrDeviceIndex snFdpCachedAddrDeviceAddrEntryIndex
Column Syntax OID
snFdpCachedAddrIfIndex
The ifIndex value of the local interface.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.1
snFdpCachedAddrDeviceIndex
A unique vlaue for each device from which FDP/CDP messages
are being received.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.2
snFdpCachedAddrDeviceAddrEntryIndex
A unique vlaue for address entry in device from which FDP/CDP messages
are being received.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.3
snFdpCachedAddrType
An indication of the type of address contained in the
corresponding instance of snFdpCacheAddrValue.
Enumeration
Enumerated Values:
1ip
2ipx
3appletalk
 .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.4
snFdpCachedAddrValue
The network-layer address of the device
SNMP-agent as reported in the most recent FDP/CDP message
in the following format:
IP address: 4 octets, ip(1)
IPX address: 10 octets, ipx(2)
First 4-octet as the …
OctetString .1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.5