snVLanByPortCfgStpHelloTime
HP-SN-SWITCH-GROUP-MIB ·
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.12
Object
column
Timeout
dot1dStpHelloTime: From RFC1493(Bridge MIB). The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Context
- MIB
- HP-SN-SWITCH-GROUP-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- snVLanByPortCfgEntry
- Table
- snVLanByPortCfgTable
- Siblings
- 22
Syntax
Timeout
- Source
- Timeout
- Base type
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snVLanByPortCfgVLanId The VLAN identifier (VLAN ID). | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.1 |
| snVLanByPortCfgStpProtocolSpecification An indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementat… | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.10 |
| snVLanByPortCfgStpMaxAge dot1dStpMaxAge: From RFC1493(Bridge MIB).
The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths… | column | Timeout | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.11 |
| snVLanByPortCfgStpHoldTime dot1dStpHoldTime: From RFC1493(Bridge MIB).
This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this nod… | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.13 |
| snVLanByPortCfgStpForwardDelay dot1dStpForwardDelay: From RFC1493(Bridge MIB).
This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towar… | column | Timeout | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.14 |
| snVLanByPortCfgStpTimeSinceTopologyChange The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.15 |
| snVLanByPortCfgStpTopChanges The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.16 |
| snVLanByPortCfgStpRootCost dot1dStpRootCost: From RFC1493(Bridge MIB).
The cost of the path to the root as seen from
this bridge. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.17 |
| snVLanByPortCfgStpRootPort dot1dStpRootPort: From RFC1493(Bridge MIB).
The port number of the port which offers the
lowest cost path from this bridge to the root
bridge. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.18 |
| snVLanByPortCfgStpDesignatedRoot dot1dStpDesignatedRoot: From RFC1493(Bridge MIB).
The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. Thi… | column | BridgeId | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.19 |
| snVLanByPortCfgQos The Stand alone stackable switch VLAN Priority values are:
level0(0) -- low prority
level1(1) -- high prority.
The BigIron switch VLAN Priority values are:
level0(0), level1(1),… | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.2 |
| snVLanByPortCfgBaseBridgeAddress The MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong… | column | MacAddress | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.20 |
| snVLanByPortCfgVLanName VLAN Community Name string. | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.21 |
| snVLanByPortCfgRouterIntf Optional: A virtual interface for router to the VLAN -- applied to router only.
If a SNMP-Get value is zero, that means this object was not configured. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.22 |
| snVLanByPortCfgRowStatus Use object to delete a vlan entry. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.23 |
| snVLanByPortCfgStpMode Spanning Tree Mode in the Switch Group can be set
either enabled or disabled and the default is
enabled mode.
enabled(1)...........activate Spanning Tree
disabled(0)..........no … | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.3 |
| snVLanByPortCfgStpPriority dot1dStpPriority : The value of the write-able
portion of the Stp ID, i.e., the first two octets
of the (8 octet long) Bridge ID. The other (last) 6
octets of the Bridge ID ar… | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.4 |
| snVLanByPortCfgStpGroupMaxAge dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB).
The value that all bridges use for MaxAge when
this bridge is acting as the root.
Note that 802.1D-1990 specifies that the
range… | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.5 |
| snVLanByPortCfgStpGroupHelloTime dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB).
The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified… | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.6 |
| snVLanByPortCfgStpGroupForwardDelay dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB).
The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies tha… | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.7 |
| snVLanByPortCfgBaseNumPorts The number of ports controlled by this bridging
entity. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.8 |
| snVLanByPortCfgBaseType Indicates what type of bridging this bridge can
perform. If a bridge is actually performing a
certain type of bridging this will be indicated by
entries in the port table for the… | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.9 |