snSwPortLockAddressCount

HP-SN-SWITCH-GROUP-MIB · .1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.21
MIB view Table view

Object

column r/w Integer32 
The number of source MAC addresses are allowed
for a port. Writing 0 to this object will allow
any number of addresses.

Context

MIB
HP-SN-SWITCH-GROUP-MIB
OID
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.21
Type
column
Access
readwrite
Status
current
Parent
snSwPortInfoEntry
Table
snSwPortInfoTable
Siblings
56

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-2048

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
snSwPortInfoPortNum
The port index. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only).
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.1
snSwPortInfoPortQos
The Stand alone stackable switch Port Qos Priority values are: low(0) -- low prority high(1) -- high prority. The BigIron Port Qos Priority values are: level0(0), level1(1), lev…
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.10
snSwPortInfoPhysAddress
The port physical address. The physical address represents the switch port.
columnPhysAddress.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.11
snSwPortStatsInFrames
The total number of packets received on the interface.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.12
snSwPortStatsOutFrames
The total number of packets transmitted out of the interface.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.13
snSwPortStatsAlignErrors
dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. …
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.14
snSwPortStatsFCSErrors
dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The coun…
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.15
snSwPortStatsMultiColliFrames
dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. …
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.16
snSwPortStatsFrameTooLongs
dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance o…
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.17
snSwPortStatsTxColliFrames
A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by a co…
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.18
snSwPortStatsRxColliFrames
A count of successfully received frames on a particular interface for which transmission is inhibited by more than one collision. This object is not specified in dot3 but it has …
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.19
snSwPortInfoMonitorMode
A monitoring port is selected and its traffic will be analyzed if the mode is not disabled(0), which is the default mode. The values are: disabled(0) -- No traffic …
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.2
snSwPortStatsFrameTooShorts
A count of frames received on a particular interface that below the minimum permitted frame size.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.20
snSwPortStpPortEnable
The enabled/disabled status of the port.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.22
snSwPortDhcpGateListId
The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.23
snSwPortName
Port Name string.
columnOctetString.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.24
snSwPortStatsInBcastFrames
The total number of broadcast packets received on the interface.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.25
snSwPortStatsOutBcastFrames
The total number of broadcast packets transmitted out of the interface.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.26
snSwPortStatsInMcastFrames
The total number of multicast packets received on the interface.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.27
snSwPortStatsOutMcastFrames
The total number of multicast packets transmitted out of the interface.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.28
snSwPortStatsInDiscard
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possibl…
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.29
snSwPortInfoTagMode
For tagged port, we could have multiple VLANs per port. For untagged port or auto port, there is only one VLAN ID per port.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.3
snSwPortStatsOutDiscard
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding su…
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.30
snSwPortStatsMacStations
The total number of MAC Stations connected to the interface.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.31
snSwPortCacheGroupId
Cache Group ID for the interface.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.32
snSwPortTransGroupId
Transparent Group ID for the interface.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.33
snSwPortInfoAutoNegotiate
This feature only applies to Gigabit Ethernet ports. If set to disable(0), port will be put to non-negotiation mode. If set to enable(1), port will start auto-negotiation indefini…
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.34
snSwPortInfoFlowControl
Enable/Disbale port flow control.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.35
snSwPortInfoGigType
The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. m1000BaseLX(1)....1Gbits per second fiber, with a …
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.36
snSwPortStatsLinkChange
The total number of link state change of the interface.
columnRFC1155-SMICounter.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.37
snSwPortIfIndex
In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 1213 and RFC 1573.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.38
snSwPortDescr
A textual string containing the slot/port information about the interface.
columnDisplayString.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.39
snSwPortInfoChnMode
The port can be configured to operate in either half or full duplex mode. The values are: halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The read-back channel…
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.4
snSwPortInOctets
The total number of octets received on the interface, including framing characters. This object is a 64-bit counter of the ifInOctets object, defined in RFC 1213. The octet stri…
columnOctetString.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.40
snSwPortOutOctets
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit counter of the ifOutOctets object, defined in RFC 1213. The oc…
columnOctetString.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.41
snSwPortStatsInBitsPerSec
The number of bits per second received on the interface over a 5 minutes interval.
columnRFC1155-SMIGauge.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.42
snSwPortStatsOutBitsPerSec
The number of bits per second transmitted out of the interface over a 5 minutes interval.
columnRFC1155-SMIGauge.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.43
snSwPortStatsInPktsPerSec
The number of packets per second received on the interface over a 5 minutes interval.
columnRFC1155-SMIGauge.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.44
snSwPortStatsOutPktsPerSec
The number of packets per second transmitted out of the interface over a 5 minutes interval.
columnRFC1155-SMIGauge.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.45
snSwPortStatsInUtilization
The input network utilization in hundredths of a percent over a 5 minutes interval.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.46
snSwPortStatsOutUtilization
The output network utilization in hundredths of a percent over a 5 minutes interval.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.47
snSwPortFastSpanPortEnable
The enabled/disabled fast span port status of the port.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.48
snSwPortFastSpanUplinkEnable
The enabled/disabled fast span uplink status of the port.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.49
snSwPortInfoSpeed
The speed configuration for a port. The values are: none(0)..........link down or no traffic. sAutoSense(1)....Auto-sensing 10 or 100Mbits. s10M(2)..........10Mbits per seco…
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.5
snSwPortVlanId
The ID of a VLAN of which this port is a member. Port must be untagged. For tagged port which belongs to multiple VLANs, this object return 0 which is an invalid VLAN ID value.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.50
snSwPortRouteOnly
Enable/Disable L2 switching of a routing switch port. By default, the routing switch performs routing first. If routing failed, it performs switching. Enable route only instrcuts …
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.51
snSwPortPresent
Indicate if the port is absent or present. This object only valid for M4 module
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.52
snSwPortGBICStatus
Indicate if the gig port has GBICs on them. If set to GBIC(1), it means that the port is GBIC. If set to miniGBIC(2), it means that the port miniGBIC. If set to empty(3), it mea…
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.53
snSwPortStatsInKiloBitsPerSec
Bit rate in kilobits per second received on the 10G and faster interface over a 5 minutes interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.54
snSwPortStatsOutKiloBitsPerSec
Bit rate in kilobits per second transmitted out of the 10G and faster interface over a 5 minutes interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.55
snSwPortLoadInterval
The time in seconds for which average port utilization should be carried out. The value should be incremental of 30 seconds, between the ranges specified.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.56
snSwPortTagType
The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet packet is the tag value.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.57
snSwPortInfoMediaType
The media type for the port. The values are: other(1).........other or unknown media. m100BaseTX(2)....100Mbits per second copper. m100BaseFX(3)....100Mbits per second fiber…
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.6
snSwPortInfoConnectorType
The type of connector that the port offers. The values are: other(1)...........other or unknown connector copper(2)..........Copper connector fiber(3)...........Fiber connector…
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.7
snSwPortInfoAdminStatus
The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II)
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.8
snSwPortInfoLinkStatus
The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II)
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.9