FCMGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
187

connUnitTable

table mandatory
.1.3.6.1.3.94.1.6 · 1 row entry · 31 columns
Open in standard view 
The connectivity table contains general information
on the system's units. This is the list of units under
a single SNMP agent. The number of entries is given by
the value of uNumber. It is 1 for stand-alone system.
connUnitEntry entry .1.3.6.1.3.94.1.6.1
A connectivity unit entry containing objects for a
particular unit.
Indexes
connUnitId
Column Syntax OID
connUnitId mandatory
The unique identification for this connectivity unit
among those within this proxy domain.
The value MUST be unique within the proxy domain
because it is the index variable for connUnitTable.
The value assigned to a g…
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.1.6.1.1
connUnitGlobalId mandatory
An optional global-scope identifier for this connectivity unit.
It MUST be a WWN for this connectivity unit
or 16 octets of value zero.
WWN formats requiring fewer than 16 octets
MUST be extended to 16 octets with tra…
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.1.6.1.2
connUnitType mandatory
The type of this connectivity unit.
FcUnitType
Textual Convention: FcUnitType Enumeration
Type Values:
1unknown
2other
3hub
4switch
5gateway
6converter
7hba
8proxy-agent
9storage-device
10host
11storage-subsystem
12module
13swdriver
14storage-access-device
15wdm
16ups
17nas
 .1.3.6.1.3.94.1.6.1.3
connUnitNumports mandatory
Number of physical ports in the connectivity unit
(internal/embedded, external).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.6.1.4
connUnitState mandatory
This object reports the overall state of the
connectivity unit. The meaning of all values
is essentially self-explanatory. Any of these
values may occur with any of the ConnUnitStatus
values.
Enumeration
Enumerated Values:
1unknown
2online
3offline
 .1.3.6.1.3.94.1.6.1.5
connUnitStatus mandatory
Overall status of the connectivity unit. The goal of this
object is to be the single poll point to check the status
of the connunit. If there is any other component that has
warning, then this should be set to warning, …
Enumeration
Enumerated Values:
1unknown
2unused
3ok
4warning
5failed
 .1.3.6.1.3.94.1.6.1.6
connUnitProduct mandatory
The connectivity unit vendor's product
model name.
OctetString
Constraints:
range: 0-79
 .1.3.6.1.3.94.1.6.1.7
connUnitSn mandatory
The serial number for this connectivity unit.
OctetString
Constraints:
range: 0-79
 .1.3.6.1.3.94.1.6.1.8
connUnitUpTime mandatory
The number of centiseconds since the
last unit initialization.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.3.94.1.6.1.9
connUnitUrl mandatory
URL to launch a management application,
if applicable. Otherwise empty string.
In a standalone unit, this would be the
same as the top-level URL. This has the same
definition as systemURL for keywords.
If write is no…
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.3.94.1.6.1.10
connUnitDomainId mandatory
24 bit Fibre Channel address ID of this
connectivity unit, right justified with leading
zero's if required. This should be set to the
Fibre Channel address ID or if it is a switch
it would be set to the Domain Control…
OctetString
Constraints:
range: 3-3
 .1.3.6.1.3.94.1.6.1.11
connUnitProxyMaster mandatory
A value of 'yes' means this is the proxy master
unit for a set of managed units. For example,
this could be the only unit with a management
card in it for a set of units. A standalone unit
should return 'yes' for thi…
Enumeration
Enumerated Values:
1unknown
2no
3yes
 .1.3.6.1.3.94.1.6.1.12
connUnitPrincipal mandatory
Whether this connectivity unit is the principal unit
within the group of fabric elements. If this value
is not applicable, return unknown.
Enumeration
Enumerated Values:
1unknown
2no
3yes
 .1.3.6.1.3.94.1.6.1.13
connUnitNumSensors mandatory
Number of sensors in the connUnitSensorTable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.6.1.14
connUnitStatusChangeTime obsolete
The sysuptime timestamp in centiseconds
at which the last status change occurred.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.3.94.1.6.1.15
connUnitConfigurationChangeTime obsolete
The sysuptime timestamp in centiseconds
at which the last configuration change
occurred.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.3.94.1.6.1.16
connUnitNumRevs mandatory
The number of revisions in the connUnitRevsTable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.6.1.17
connUnitNumZones obsolete
Number of zones defined in connUnitZoneTable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.6.1.18
connUnitModuleId mandatory
This is a unique id, persistent between boots,
that can be used to group a set of connUnits
together into a module. The intended use would
be to create a connUnit with a connUnitType of
'module' to represent a physical …
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.1.6.1.19
connUnitName mandatory
A display string containing a name for this
connectivity unit. This object value should be
persistent between boots.
OctetStringr/w
Constraints:
range: 0-79
 .1.3.6.1.3.94.1.6.1.20
connUnitInfo mandatory
A display string containing information
about this connectivity unit. This object value
should be persistent between boots.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.3.94.1.6.1.21
connUnitControl mandatory
This object is used to control the addressed
connUnit.

NOTE: 'Cold Start' and 'Warm Start'
are as defined in MIB II and are not meant
to be a factory reset.

resetConnUnitColdStart:
th…
Enumerationr/w
Enumerated Values:
1unknown
2invalid
3resetConnUnitColdStart
4resetConnUnitWarmStart
5offlineConnUnit
6onlineConnUnit
 .1.3.6.1.3.94.1.6.1.22
connUnitContact mandatory
Contact information for this connectivity
unit. Persistent across boots.
OctetStringr/w
Constraints:
range: 0-79
 .1.3.6.1.3.94.1.6.1.23
connUnitLocation mandatory
Location information for this connectivity
unit.Persistent across boots.
OctetStringr/w
Constraints:
range: 0-79
 .1.3.6.1.3.94.1.6.1.24
connUnitEventFilter mandatory
This value defines the event severity
that will be logged by this connectivity unit.
All events of severity less than or equal to
connUnitEventFilter are logged in connUnitEventTable.
Persistent across boots.
FcEventSeverityr/w
Textual Convention: FcEventSeverity Enumeration
Type Values:
1unknown
2emergency
3alert
4critical
5error
6warning
7notify
8info
9debug
10mark
 .1.3.6.1.3.94.1.6.1.25
connUnitNumEvents mandatory
Number of events currently in the
connUnitEventTable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.6.1.26
connUnitMaxEvents mandatory
Max number of events that can be defined
in connUnitEventTable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.6.1.27
connUnitEventCurrID mandatory
The last used event id (connUnitEventIndex).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.6.1.28
connUnitFabricID mandatory
A globally unique value to identify the fabric that this
ConnUnit belongs to, otherwise empty string. This would
typically be equal to the connUnitGlobalID of the
primary switch in a Fibre Channel fabric.
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.1.6.1.29
connUnitNumLinks mandatory
The number of links in the link table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.6.1.30
connUnitVendorId mandatory
The connectivity unit vendor's name.
OctetString
Constraints:
range: 0-79
 .1.3.6.1.3.94.1.6.1.31

connUnitRevsTable

table mandatory
.1.3.6.1.3.94.1.7 · 1 row entry · 4 columns
Open in standard view 
Table of the revisions supported by 
connectivity units managed by this agent.
connUnitRevsEntry entry .1.3.6.1.3.94.1.7.1
Indexes
connUnitRevsUnitId connUnitRevsIndex
Column Syntax OID
connUnitRevsUnitId mandatory
The connUnitId of the connectivity unit
that contains this revision table.
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.1.7.1.1
connUnitRevsIndex mandatory
A unique value among all connUnitRevsEntrys
with the same value of connUnitRevsUnitId,
in the range between 1 and
connUnitNumRevs[connUnitRevsUnitId].
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.3.94.1.7.1.2
connUnitRevsRevId mandatory
A vendor-specific string identifying a
revision of a component of the connUnit
indexed by connUnitRevsUnitId.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.3.94.1.7.1.3
connUnitRevsDescription mandatory
Description of a component to which the revision
corresponds.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.3.94.1.7.1.4

connUnitSensorTable

table mandatory
.1.3.6.1.3.94.1.8 · 1 row entry · 8 columns
Open in standard view 
Table of the sensors supported by each
connectivity unit managed by this agent.
connUnitSensorEntry entry .1.3.6.1.3.94.1.8.1
Each entry contains the information for a
specific sensor.
Indexes
connUnitSensorUnitId connUnitSensorIndex
Column Syntax OID
connUnitSensorUnitId mandatory
The connUnitId of the connectivity unit
that contains this sensor table.
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.1.8.1.1
connUnitSensorIndex mandatory
A unique value among all connUnitSensorEntrys
with the same value of connUnitSensorUnitId,
in the range between 1 and
connUnitNumSensor[connUnitSensorUnitId].
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.3.94.1.8.1.2
connUnitSensorName mandatory
A textual identification of the sensor
intended primarily for operator use.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.3.94.1.8.1.3
connUnitSensorStatus mandatory
The status indicated by the sensor.
Enumeration
Enumerated Values:
1unknown
2other
3ok
4warning
5failed
 .1.3.6.1.3.94.1.8.1.4
connUnitSensorInfo mandatory
Miscellaneous static info about the sensor
such as its serial number.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.3.94.1.8.1.5
connUnitSensorMessage mandatory
This describes the status of the sensor
as a message. It may also provide more
resolution on the sensor indication, for
example 'Cover temperature 1503K, above
nominal operating range'
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.3.94.1.8.1.6
connUnitSensorType mandatory
The type of component being monitored by this
sensor.
Enumeration
Enumerated Values:
1unknown
2other
3battery
4fan
5power-supply
6transmitter
7enclosure
8board
9receiver
 .1.3.6.1.3.94.1.8.1.7
connUnitSensorCharacteristic mandatory
The characteristics being monitored by this
sensor.
Enumeration
Enumerated Values:
1unknown
2other
3temperature
4pressure
5emf
6currentValue
7airflow
8frequency
9power
10door
 .1.3.6.1.3.94.1.8.1.8

connUnitPortTable

table mandatory
.1.3.6.1.3.94.1.10 · 1 row entry · 23 columns
Open in standard view 
Generic information on ports for a specific 
connUnit.
connUnitPortEntry entry .1.3.6.1.3.94.1.10.1
Each entry contains the information for
a specific port.
Indexes
connUnitPortUnitId connUnitPortIndex
Column Syntax OID
connUnitPortUnitId mandatory
The connUnitId of the connectivity unit
that contains this port.
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.1.10.1.1
connUnitPortIndex mandatory
A unique value among all connUnitPortEntrys
on this connectivity unit, between 1 and
connUnitNumPort[connUnitPortUnitId].
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.3.94.1.10.1.2
connUnitPortType mandatory
The port type.
Enumeration
Enumerated Values:
1unknown
2other
3not-present
4hub-port
5n-port
6nl-port
7fl-port
8f-port
9e-port
10g-port
11domain-ctl
12hub-controller
13scsi
14escon
15lan
16wan
17ac
18dc
19ssa
20wdm
21ib
22ipstore
 .1.3.6.1.3.94.1.10.1.3
connUnitPortFCClassCap mandatory
Bit mask that specifies the classes
of service capability of this port. If this is not
applicable, return all bits set to zero.

The bits have
the following definition:
unknown - 0
class-f …
OctetString
Constraints:
range: 2-2
 .1.3.6.1.3.94.1.10.1.4
connUnitPortFCClassOp mandatory
Bit mask that specifies the classes
of service that are currently operational.
If this is not applicable, return all bits
set to zero. This object has the same
definition as connUnitPortFCClassCap
OctetString
Constraints:
range: 2-2
 .1.3.6.1.3.94.1.10.1.5
connUnitPortState mandatory
The user selected state of the port hardware.
Enumeration
Enumerated Values:
1unknown
2online
3offline
4bypassed
5diagnostics
 .1.3.6.1.3.94.1.10.1.6
connUnitPortStatus mandatory
An overall protocol status for the
port. This value of connUnitPortState is not
online, then this is reported Unknown.
Enumeration
Enumerated Values:
1unknown
2unused
3ready
4warning
5failure
6notparticipating
7initializing
8bypass
9ols
10other
 .1.3.6.1.3.94.1.10.1.7
connUnitPortTransmitterType mandatory
The technology of the port transceiver.
Enumeration
Enumerated Values:
1unknown
2other
3unused
4shortwave
5longwave
6copper
7scsi
8longwaveNoOFC
9shortwaveNoOFC
10longwaveLED
11ssa
 .1.3.6.1.3.94.1.10.1.8
connUnitPortModuleType mandatory
The module type of the port connector.
Enumeration
Enumerated Values:
1unknown
2other
3gbic
4embedded
5glm
6gbicSerialId
7gbicNoSerialId
8gbicNotInstalled
9smallFormFactor
 .1.3.6.1.3.94.1.10.1.9
connUnitPortWwn mandatory
The World Wide Name of the port
if applicable, otherwise all zeros.
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.1.10.1.10
connUnitPortFCId mandatory
This is the assigned Fibre Channel ID of
this port. This value is expected to be
a Big Endian value of 24 bits. If this is
loop, then it is the ALPA that is connected.
If this is an eport, then it will only
contain the…
FcAddressId
Textual Convention: FcAddressId OctetString
Type Constraints:
range: 3
 .1.3.6.1.3.94.1.10.1.11
connUnitPortSn mandatory
The serial number of the unit (e.g., for
a GBIC). If this is not applicable, return
empty string.
OctetString
Constraints:
range: 0-79
 .1.3.6.1.3.94.1.10.1.12
connUnitPortRevision mandatory
The port revision (e.g., for a GBIC).
OctetString
Constraints:
range: 0-79
 .1.3.6.1.3.94.1.10.1.13
connUnitPortVendor mandatory
The port vendor (e.g., for a GBIC).
OctetString
Constraints:
range: 0-79
 .1.3.6.1.3.94.1.10.1.14
connUnitPortSpeed mandatory
The speed of the port in kilobytes per
second.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.10.1.15
connUnitPortControl mandatory
This object is used to control the addressed
connUnit's port. Valid commands are:

resetConnUnitPort: If the addressed connUnit
allows this operation to be performed to this
port, the addressed por…
Enumerationr/w
Enumerated Values:
1unknown
2invalid
3resetConnUnitPort
4bypassConnUnitPort
5unbypassConnUnitPort
6offlineConnUnitPort
7onlineConnUnitPort
8resetConnUnitPortCounters
 .1.3.6.1.3.94.1.10.1.16
connUnitPortName mandatory
A user-defined name for this port. This means that up to
DisplayString characters may be supported. If less than,
then the name will be truncated in the connunit.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.3.94.1.10.1.17
connUnitPortPhysicalNumber mandatory
This is the internal port number this
port is known by. In many implementations,
this should be the same as connUnitPortIndex.
Some implementations may have an internal port
representation not compatible with the rule…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.10.1.18
connUnitPortStatObject obsolete
This contains the OID of the first object of the
table that contains the statistics for this particular
port. If this has a value of zero, then there are no
statistics available for this port. The port type
information …
ObjectIdentifier .1.3.6.1.3.94.1.10.1.19
connUnitPortProtocolCap mandatory
Bit mask that specifies the driver level
protocol capability of this port. If this is not
applicable, return all bits set to zero.

The bits have
the following definition:
unknown - 0
Loop …
OctetString
Constraints:
range: 2-2
 .1.3.6.1.3.94.1.10.1.20
connUnitPortProtocolOp mandatory
Bit mask that specifies the driver level
protocol(s) that are currently operational.
If this is not applicable, return all bits
set to zero. This object has the same
definition as connUnitPortProtocolCap
OctetString
Constraints:
range: 2-2
 .1.3.6.1.3.94.1.10.1.21
connUnitPortNodeWwn mandatory
The Node World Wide Name of the port
if applicable, otherwise all zeros.
This should have the same value for a
group of related ports. The container is
defined as the largest physical unit.
For example, all ports on HB…
FcNameId
Textual Convention: FcNameId OctetString
Type Constraints:
range: 8
 .1.3.6.1.3.94.1.10.1.22
connUnitPortHWState mandatory
The hardware detected state of the port.
Enumeration
Enumerated Values:
1unknown
2failed
3bypassed
4active
5loopback
6txfault
7noMedia
8linkDown
 .1.3.6.1.3.94.1.10.1.23

connUnitEventTable

table mandatory
.1.3.6.1.3.94.1.11 · 1 row entry · 9 columns
Open in standard view 
The table of connectivity unit events. Errors, 
warnings, and information should be reported
in this table.
connUnitEventEntry entry .1.3.6.1.3.94.1.11.1
Each entry contains information on
a specific event for the given
connectivity unit.
Indexes
connUnitEventUnitId connUnitEventIndex
Column Syntax OID
connUnitEventUnitId mandatory
The connUnitId of the connectivity unit
that contains this event table.
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.1.11.1.1
connUnitEventIndex mandatory
Each connectivity unit has its own event buffer.
As it wraps, it may write over previous events.
This object is an index into the buffer.
It is recommended that this table be read using
'getNext's to retrieve the initia…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.3.94.1.11.1.2
connUnitEventId obsolete
The internal event Id. Incremented for each
event, ranging between 1 and connUnitMaxEvents.
Not used as table index to simplify
the agent implementation. When this
reaches the end of the range specified by
connUnitMax…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.11.1.3
connUnitREventTime mandatory
This is the real time when the event occurred.
It has the following format.
DDMMYYYY HHMMSS
DD=day number
MM=month number
YYYY=year number
HH=hour number
MM=minute number
SS=seconds number
If…
OctetString
Constraints:
range: 0-15
 .1.3.6.1.3.94.1.11.1.4
connUnitSEventTime mandatory
This is the sysuptime timestamp when the
event occurred.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.3.94.1.11.1.5
connUnitEventSeverity mandatory
The event severity level.
FcEventSeverity
Textual Convention: FcEventSeverity Enumeration
Type Values:
1unknown
2emergency
3alert
4critical
5error
6warning
7notify
8info
9debug
10mark
 .1.3.6.1.3.94.1.11.1.6
connUnitEventType mandatory
The type of this event.
Enumeration
Enumerated Values:
1unknown
2other
3status
4configuration
5topology
 .1.3.6.1.3.94.1.11.1.7
connUnitEventObject mandatory
This is used with the connUnitEventType
to identify which object the event refers to.
Examples are connUnitPortStatus.connUnitId.connUnitPortIndex,
connUnitStatus.connUnitId, etc.
ObjectIdentifier .1.3.6.1.3.94.1.11.1.8
connUnitEventDescr mandatory
The description of the event.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.3.94.1.11.1.9

connUnitLinkTable

table mandatory
.1.3.6.1.3.94.1.12 · 1 row entry · 14 columns
Open in standard view 
A list of links know to this agent from this
connectivity unit to other connectivity units.
connUnitLinkEntry entry .1.3.6.1.3.94.1.12.1
An entry describing a particular link to another.
Indexes
connUnitLinkUnitId connUnitLinkIndex
Column Syntax OID
connUnitLinkUnitId mandatory
The connUnitId of the connectivity unit
that contains this link table.
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.1.12.1.1
connUnitLinkIndex mandatory
This index is used to create a unique value
for each entry in the link table with the same
connUnitLinkUnitId. The value
can only be reused if it is not currently in
use and the value is the next candidate to
be used. T…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.3.94.1.12.1.2
connUnitLinkNodeIdX mandatory
The node WWN of the unit at one end
of the link. If the node WWN is unknown
and the node is a connUnit in the responding
agent then the value of this object MUST BE
equal to its connUnitID.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.3.94.1.12.1.3
connUnitLinkPortNumberX mandatory
The port number on the unit specified by
connUnitLinkNodeIdX if known, otherwise -1.
If the value is nonnegative then it will be
equal to connUnitPortPhysicalNumber.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.12.1.4
connUnitLinkPortWwnX mandatory
The port WWN of the unit specified by
connUnitLinkNodeIdX if known,
otherwise 16 octets of binary 0
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.1.12.1.5
connUnitLinkNodeIdY mandatory
The node WWN of the unit at the other end
of the link. If the node WWN is unknown
and the node is a connUnit in the responding
SNMP agency then the value of this object
MUST BE equal to its connUnitID.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.3.94.1.12.1.6
connUnitLinkPortNumberY mandatory
The port number on the unit specified by
connUnitLinkNodeIdY if known, otherwise -1.
If the value is nonnegative then it will be
equal to connUnitPortPhysicalNumber.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.12.1.7
connUnitLinkPortWwnY mandatory
The port WWN on the unit specified by
connUnitLinkNodeIdY if known,
otherwise 16 octets of binary 0
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.1.12.1.8
connUnitLinkAgentAddressY mandatory
The address of an FCMGMT MIB agent for the
node identified by connUnitLinkNodeIdY,
if known; otherwise 16 octets of binary 0
OctetString
Constraints:
range: 16-16
 .1.3.6.1.3.94.1.12.1.9
connUnitLinkAgentAddressTypeY mandatory
If connUnitLinkAgentAddressY is nonzero,
it is a protocol address.
ConnUnitLinkAgentAddressTypeY is the
the 'address family number' assigned by IANA
to identify the address format.
(eg, 1 is Ipv4, 2 is Ipv6). If
connUni…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.12.1.10
connUnitLinkAgentPortY mandatory
The IP port number for the agent. This is
provided in case the agent is at a non-standard
SNMP port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.12.1.11
connUnitLinkUnitTypeY mandatory
Type of the FC connectivity unit as defined in
connUnitType.
FcUnitType
Textual Convention: FcUnitType Enumeration
Type Values:
1unknown
2other
3hub
4switch
5gateway
6converter
7hba
8proxy-agent
9storage-device
10host
11storage-subsystem
12module
13swdriver
14storage-access-device
15wdm
16ups
17nas
 .1.3.6.1.3.94.1.12.1.12
connUnitLinkConnIdY mandatory
This is the Fibre Channel ID of this port.
If the connectivity unit is a switch, this
is expected to be a Big Endian value of 24
bits. If this is loop, then it is the ALPA
that is connected. If this is an eport, then
it…
OctetString
Constraints:
range: 3-3
 .1.3.6.1.3.94.1.12.1.13
connUnitLinkCurrIndex mandatory
The last used link index.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.12.1.14

connUnitZoneTable

table mandatory
.1.3.6.1.3.94.1.13 · 1 row entry · 11 columns
Open in standard view
connUnitZoneEntry entry .1.3.6.1.3.94.1.13.1
Indexes
connUnitZoneIndex connUnitZoneMemberIndex
Column Syntax OID
connUnitZoneIndex mandatory
Unique table index for each zone.
Valid values are between 1 and
connUnitZoneSetNumZones.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.3.94.1.13.1.1
connUnitZoneMemberIndex mandatory
Unique table index for each zone
member. Valid values are between
1 and connUnitZoneNumMembers.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.3.94.1.13.1.2
connUnitZoneSetName mandatory
Name of the active zone set to
which the zone and zone member
belong.
OctetString
Constraints:
range: 0-79
 .1.3.6.1.3.94.1.13.1.3
connUnitZoneSetNumZones mandatory
The number of zones in the active
zone set.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.13.1.4
connUnitZoneName mandatory
Name of the zone.
OctetString
Constraints:
range: 0-79
 .1.3.6.1.3.94.1.13.1.5
connUnitZoneCapabilities mandatory
1-byte bit mask that specifies the
zoning capabilities supported by the
fabric.
Bit 7 - Soft zones supported.
Bit 6 - Hard zones supported.
Bits 5-0 - Reserved.
OctetString
Constraints:
range: 1-1
 .1.3.6.1.3.94.1.13.1.6
connUnitZoneEnforcementState mandatory
1-byte bit mask that specifies the
current enforcement of the Zone Set.
Bit 7 - Soft zone set enforced.
Bit 6 - Hard zone set enforced.
Bits 5-0 - Reserved.
OctetString
Constraints:
range: 1-1
 .1.3.6.1.3.94.1.13.1.7
connUnitZoneAttributeBlock mandatory
A variable length structure that
contains extended zone attributes
defined in the FC-GS-4 enhanced
zone server. See FC-GS-4 draft
standard for details and format of
the structure.
Support of this object is optional.
OctetString
Constraints:
range: 80-80
 .1.3.6.1.3.94.1.13.1.8
connUnitZoneNumMembers mandatory
Number of zone members in the
zone: connUnitZoneName.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.13.1.9
connUnitZoneMemberIdType mandatory
Type of zone member ID:
1- Port WWN
2- Domain & Port ID
3- FC Address
4- Node WWN
5- Alias Name
6-'FF'h - Vendor specified.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.13.1.10
connUnitZoneMemberID mandatory
ID of the zone member based on
connUnitZoneMemberIdType.
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.1.13.1.11

connUnitZoningAliasTable

table mandatory
.1.3.6.1.3.94.1.14 · 1 row entry · 7 columns
Open in standard view
connUnitZoningAliasEntry entry .1.3.6.1.3.94.1.14.1
Indexes
connUnitZoningAliasIndex connUnitZoningAliasMemberIndex
Column Syntax OID
connUnitZoningAliasIndex mandatory
Unique table index for each alias.
Valid values are between 1 and
connUnitZoningAliasNumAliases.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.3.94.1.14.1.1
connUnitZoningAliasMemberIndex mandatory
Unique table index for each alias
member. Valid values are between 1
and connUnitZoningAliasNumMembers.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.3.94.1.14.1.2
connUnitZoningAliasNumAliases mandatory
The number of aliases defined in this
table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.14.1.3
connUnitZoningAliasName mandatory
The alias name.
OctetString
Constraints:
range: 0-79
 .1.3.6.1.3.94.1.14.1.4
connUnitZoningAliasNumMembers mandatory
Number of members in the alias:
connUnitZoningAliasName.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.14.1.5
connUnitZoningAliasMemberIdType mandatory
Type of alias member ID:
1- Port WWN
2- Domain & Port ID
3- FC Address
Others: reserved.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.1.14.1.6
connUnitZoningAliasMemberID mandatory
ID of the alias member based on
connUnitZoningAliasMemberIdType.
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.1.14.1.7

trapRegTable

table mandatory
.1.3.6.1.3.94.2.3 · 1 row entry · 4 columns
Open in standard view 
A table containing a row for each IP address/port
number that traps will be sent to.
trapRegEntry entry .1.3.6.1.3.94.2.3.1
Ip/Port pair for a specific client.
Indexes
trapRegIpAddress trapRegPort
Column Syntax OID
trapRegIpAddress mandatory
The Ip address of a client registered for
traps.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.3.94.2.3.1.1
trapRegPort mandatory
The UDP port to send traps to for this host.
Normally this would be the standard trap port
(162). This object is an index and must be
specified to create a row in this table.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.3.94.2.3.1.2
trapRegFilter mandatory
This value defines the trap severity
filter for this trap host. The connUnit will send
traps to this host that have a severity level
less than or equal to this value.
The default value of this object is 'warning'.
FcEventSeverityr/w
Textual Convention: FcEventSeverity Enumeration
Type Values:
1unknown
2emergency
3alert
4critical
5error
6warning
7notify
8info
9debug
10mark
 .1.3.6.1.3.94.2.3.1.3
trapRegRowState mandatory
Specifies the state of the row.
rowDestroy
READ: Can never happen.
WRITE: Remove this row from the table.
rowInactive
READ: Indicates that this row does exist, but
that traps are not enabled to be …
Enumerationr/w
Enumerated Values:
1rowDestroy
2rowInactive
3rowActive
 .1.3.6.1.3.94.2.3.1.4

connUnitPortStatTable

table mandatory
.1.3.6.1.3.94.4.5 · 1 row entry · 50 columns
Open in standard view 
A list of statistics for the fabric port types.
connUnitPortStatEntry entry .1.3.6.1.3.94.4.5.1
An entry describing port statistics.
Indexes
connUnitPortStatUnitId connUnitPortStatIndex
Column Syntax OID
connUnitPortStatUnitId mandatory
The connUnitId of the connectivity unit
that contains this port stat table.
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.4.5.1.1
connUnitPortStatIndex mandatory
A unique value among all entries in this
table having the same connUnitPortStatUnitId,
between 1 and
connUnitNumPort[connUnitPortStatUnitId].
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.3.94.4.5.1.2
connUnitPortStatCountError mandatory
A count of the errors that have occured
on this port.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.3
connUnitPortStatCountTxObjects mandatory
The number of frames/packets/IOs/etc that have been transmitted
by this port. Note: A Fibre Channel frame starts with SOF and
ends with EOF. FC loop devices should not count frames passed
through. This value represents …
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.4
connUnitPortStatCountRxObjects mandatory
The number of frames/packets/IOs/etc that have been received
by this port. Note: A Fibre Channel frame starts with SOF and
ends with EOF. FC loop devices should not count frames passed
through. This value represents the…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.5
connUnitPortStatCountTxElements mandatory
The number of octets or bytes that have been transmitted
by this port. One second periodic polling of the port. This
value is saved and compared with the next polled value to
compute net throughput. Note, for Fibre Chan…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.6
connUnitPortStatCountRxElements mandatory
The number of octets or bytes that have been received.
by this port. One second periodic polling of the port. This
value is saved and compared with the next polled value to
compute net throughput. Note, for Fibre Channe…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.7
connUnitPortStatCountBBCreditZero mandatory
Count of transitions in/out of BBcredit zero state.
The other side is not providing any credit. Note,
this is a Fibre Channel stat only.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.8
connUnitPortStatCountInputBuffersFull mandatory
Count of occurrences when all input buffers of a
port were full and outbound buffer-to-buffer credit
transitioned to zero. There is no credit to
provide to other side. Note, this is a Fibre Channel
stat only.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.9
connUnitPortStatCountFBSYFrames mandatory
Count of times that FBSY was returned to this port as a
result of a frame that could not be delivered to the other
end of the link. This occurs if either the Fabric or the
destination port is temporarily busy. Port can…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.10
connUnitPortStatCountPBSYFrames mandatory
Count of times that PBSY was returned to this port as a
result of a frame that could not be delivered to the other
end of the link. This occurs if the destination port is
temporarily busy. PBSY can only occur on SOFc1 …
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.11
connUnitPortStatCountFRJTFrames mandatory
Count of times that FRJT was returned to this port as a
result of a Frame that was rejected by the fabric. Note,
This is the total for all classes and is a Fibre Channel
only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.12
connUnitPortStatCountPRJTFrames mandatory
Count of times that FRJT was returned to this port as a
result of a Frame that was rejected at the destination
N_Port. Note, This is the total for all classes and is
a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.13
connUnitPortStatCountClass1RxFrames mandatory
Count of Class 1 Frames received at this port. Note, this
is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.14
connUnitPortStatCountClass1TxFrames mandatory
Count of Class 1 Frames transmitted out this port. Note,
this is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.15
connUnitPortStatCountClass1FBSYFrames mandatory
Count of times that FBSY was returned to this port as a
result of a Class 1 Frame that could not be delivered to the
other end of the link. This occurs if either the Fabric or the
destination port is temporarily busy. …
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.16
connUnitPortStatCountClass1PBSYFrames mandatory
Count of times that PBSY was returned to this port as a result
of a Class 1 Frame that could not be delivered to the other end
of the link. This occurs if the destination N_Port is temporarily
busy. PBSY can only occur…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.17
connUnitPortStatCountClass1FRJTFrames mandatory
Count of times that FRJT was returned to this port as a result
of a Class 1 Frame that was rejected by the fabric. Note, this
is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.18
connUnitPortStatCountClass1PRJTFrames mandatory
Count of times that FRJT was returned to this port as a result
of a Class 1 Frame that was rejected at the destination N_Port.
Note, this is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.19
connUnitPortStatCountClass2RxFrames mandatory
Count of Class 2 Frames received at this port. Note, this
is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.20
connUnitPortStatCountClass2TxFrames mandatory
Count of Class 2 Frames transmitted out this port. Note,
this is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.21
connUnitPortStatCountClass2FBSYFrames mandatory
Count of times that FBSY was returned to this port as a
result of a Class 2 Frame that could not be delivered to the
other end of the link. This occurs if either the Fabric or the
destination port is temporarily busy. …
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.22
connUnitPortStatCountClass2PBSYFrames mandatory
Count of times that PBSY was returned to this port as a result
of a Class 2 Frame that could not be delivered to the other end
of the link. This occurs if the destination N_Port is temporarily
busy. PBSY can only occur…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.23
connUnitPortStatCountClass2FRJTFrames mandatory
Count of times that FRJT was returned to this port as a result
of a Class 2 Frame that was rejected by the fabric. Note, this
is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.24
connUnitPortStatCountClass2PRJTFrames mandatory
Count of times that FRJT was returned to this port as a result
of a Class 2 Frame that was rejected at the destination N_Port.
Note, this is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.25
connUnitPortStatCountClass3RxFrames mandatory
Count of Class 3 Frames received at this port. Note, this
is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.26
connUnitPortStatCountClass3TxFrames mandatory
Count of Class 3 Frames transmitted out this port. Note,
this is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.27
connUnitPortStatCountClass3Discards mandatory
Count of Class 3 Frames that were discarded upon reception
at this port. There is no FBSY or FRJT generated for Class 3
Frames. They are simply discarded if they cannot be delivered.
Note, this is a Fibre Channel only…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.28
connUnitPortStatCountRxMulticastObjects mandatory
Count of Multicast Frames or Packets received at this port.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.29
connUnitPortStatCountTxMulticastObjects mandatory
Count of Multicast Frames or Packets transmitted out this port.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.30
connUnitPortStatCountRxBroadcastObjects mandatory
Count of Broadcast Frames or Packets received at this port.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.31
connUnitPortStatCountTxBroadcastObjects mandatory
Count of Broadcast Frames or Packets transmitted out this port.
On a Fibre Channel loop, count only OPNr frames generated.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.32
connUnitPortStatCountRxLinkResets mandatory
Count of Link resets. This is the number of LRs received. Note, this
is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.33
connUnitPortStatCountTxLinkResets mandatory
Count of Link resets. This is the number LRs transmitted. Note, this
is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.34
connUnitPortStatCountNumberLinkResets mandatory
Count of Link resets and LIPs detected at this port.
The number times the reset link protocol is initiated.
These are the count of the logical resets, a count of the
number of primatives. Note, this is a Fibre Channel o…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.35
connUnitPortStatCountRxOfflineSequences mandatory
Count of Offline Primitive OLS received at this port.
Note, this is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.36
connUnitPortStatCountTxOfflineSequences mandatory
Count of Offline Primitive OLS transmitted by this port.
Note, this is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.37
connUnitPortStatCountNumberOfflineSequences mandatory
Count of Offline Primitive sequence received at this port.
Note, this is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.38
connUnitPortStatCountLinkFailures mandatory
Count of link failures. This count is part of the Link Error
Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre
Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.39
connUnitPortStatCountInvalidCRC mandatory
Count of frames received with invalid CRC. This count is
part of the Link Error Status Block (LESB). (FC-PH 29.8). Loop
ports should not count CRC errors passing through when
monitoring. Note, this is a Fibre Channel on…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.40
connUnitPortStatCountInvalidTxWords mandatory
Count of invalid transmission words received at this
port. This count is part of the Link Error Status Block (LESB).
(FC-PH 29.8). Note, this is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.41
connUnitPortStatCountPrimitiveSequenceProtocolErrors mandatory
Count of primitive sequence protocol errors detected at
this port. This count is part of the Link Error Status
Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel
only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.42
connUnitPortStatCountLossofSignal mandatory
Count of instances of signal loss detected at port.
This count is part of the Link Error Status Block (LESB).
(FC-PH 29.8). Note, this is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.43
connUnitPortStatCountLossofSynchronization mandatory
Count of instances of synchronization loss detected at port.
This count is part of the Link Error Status Block (LESB).
(FC-PH 29.8). Note, this is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.44
connUnitPortStatCountInvalidOrderedSets mandatory
Count of invalid ordered sets received at port. This count
is part of the Link Error Status Block (LESB). (FC-PH 29.8).
Note, this is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.45
connUnitPortStatCountFramesTooLong mandatory
Count of frames received at this port where the
frame length was greater than what was agreed to in
FLOGI/PLOGI. This could be caused by losing the end of
frame delimiter. Note, this is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.46
connUnitPortStatCountFramesTruncated mandatory
Count of frames received at this port where the
frame length was less than the minimum indicated by the
frame header - normally 24 bytes, but it could be more if the
DFCTL field indicates an optional header should have …
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.47
connUnitPortStatCountAddressErrors mandatory
Count of frames received with unknown addressing.
e.x. unknown SID or DID. the SID or DID is not known to the
routing algorithm. Note. this is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.48
connUnitPortStatCountDelimiterErrors mandatory
Count of invalid frame delimiters received at this
port. An example is a frame with a class 2 start and and a
class 3 at the end. Note, this is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.49
connUnitPortStatCountEncodingDisparityErrors mandatory
Count of disparity errors received at this port. Note,
this is a Fibre Channel only stat.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.4.5.1.50

connUnitSnsTable

table mandatory
.1.3.6.1.3.94.5.2.1 · 1 row entry · 15 columns
Open in standard view 
This table contains an entry for each object registered with
this port in the switch.
connUnitSnsEntry entry .1.3.6.1.3.94.5.2.1.1
The Simple Name Server table for the port represented by
ConnUnitSnsPortIndex .
Indexes
connUnitSnsId connUnitSnsPortName connUnitSnsPortIdentifier
Column Syntax OID
connUnitSnsId mandatory
The connUnitId of the connectivity unit
that contains this Name Server table.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.3.94.5.2.1.1.1
connUnitSnsPortIndex mandatory
The physical port number of this SNS table entry.
Each physical port has an SNS table with 1-n entries
indexed by ConnUnitSnsPortIdentifier (port address)
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.5.2.1.1.2
connUnitSnsPortIdentifier mandatory
The Fibre Channel ID for this entry in the SNS table.
FcAddressId
Textual Convention: FcAddressId OctetString
Type Constraints:
range: 3
 .1.3.6.1.3.94.5.2.1.1.3
connUnitSnsPortName mandatory
The Port WWN for this entry in the SNS table.
FcNameId
Textual Convention: FcNameId OctetString
Type Constraints:
range: 8
 .1.3.6.1.3.94.5.2.1.1.4
connUnitSnsNodeName mandatory
The Node Name for this entry in the SNS table.
FcNameId
Textual Convention: FcNameId OctetString
Type Constraints:
range: 8
 .1.3.6.1.3.94.5.2.1.1.5
connUnitSnsClassOfSvc mandatory
The Classes of Service offered by this entry in the SNS table.
This is a bit mask where each bit that represents the class
of service is set to a value of one if the class is supported.
Class 1 is bit zero.
OctetString
Constraints:
range: 1-1
 .1.3.6.1.3.94.5.2.1.1.6
connUnitSnsNodeIPAddress mandatory
The IPv6 formatted address of the Node for this entry in the SNS table.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.3.94.5.2.1.1.7
connUnitSnsProcAssoc mandatory
The Process Associator for this entry in the SNS table.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.3.94.5.2.1.1.8
connUnitSnsFC4Type mandatory
The FC-4 Types supported by this entry in the SNS table.
OctetString
Constraints:
range: 32-32
 .1.3.6.1.3.94.5.2.1.1.9
connUnitSnsPortType mandatory
The Port Type of this entry in the SNS table.
OctetString
Constraints:
range: 1-1
 .1.3.6.1.3.94.5.2.1.1.10
connUnitSnsPortIPAddress mandatory
The IPv6 formatted address of this entry in the SNS table.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.3.94.5.2.1.1.11
connUnitSnsFabricPortName mandatory
The Fabric Port name of this entry in the SNS table.
FcNameId
Textual Convention: FcNameId OctetString
Type Constraints:
range: 8
 .1.3.6.1.3.94.5.2.1.1.12
connUnitSnsHardAddress mandatory
The Hard ALPA of this entry in the SNS table.
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.5.2.1.1.13
connUnitSnsSymbolicPortName mandatory
The Symbolic Port Name of this entry in the SNS table.
OctetString
Constraints:
range: 0-79
 .1.3.6.1.3.94.5.2.1.1.14
connUnitSnsSymbolicNodeName mandatory
The Symbolic Node Name of this entry in the SNS table.
OctetString
Constraints:
range: 0-79
 .1.3.6.1.3.94.5.2.1.1.15

connUnitPlatformTable

table mandatory
.1.3.6.1.3.94.5.2.2 · 1 row entry · 11 columns
Open in standard view
connUnitPlatformEntry entry .1.3.6.1.3.94.5.2.2.1
Indexes
connUnitPlatformIndex connUnitPlatformNodeIndex
Column Syntax OID
connUnitPlatformIndex mandatory
Unique table index for each platform.
Valid values are between 1 and
connUnitPlatformsMaxEntry.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.3.94.5.2.2.1.1
connUnitPlatformNodeIndex mandatory
Unique table index for each platform
node. Valid values are between 1 and
connUnitPlatformsNumNodes.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.3.94.5.2.2.1.2
connUnitPlatformUnitID mandatory
The connUnitId of the connectivity
unit that contains this Platform table.
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.5.2.2.1.3
connUnitPlatformName mandatory
The platform name. May be either a
readable string or a unique ID format
as specified in the FC-GS-4 draft
standard.
OctetString
Constraints:
range: 79-79
 .1.3.6.1.3.94.5.2.2.1.4
connUnitPlatformType mandatory
The platform type.
FcUnitType
Textual Convention: FcUnitType Enumeration
Type Values:
1unknown
2other
3hub
4switch
5gateway
6converter
7hba
8proxy-agent
9storage-device
10host
11storage-subsystem
12module
13swdriver
14storage-access-device
15wdm
16ups
17nas
 .1.3.6.1.3.94.5.2.2.1.6
connUnitPlatformLabel mandatory
An administratively assigned symbolic
name for the platform. The Platform
Label shall only contain print-able
ASCII characters.
OctetString
Constraints:
range: 0-79
 .1.3.6.1.3.94.5.2.2.1.7
connUnitPlatformDescription mandatory
A textual description of the platform.
This value should include the full name
and version identification of
the platform's hardware type and
software operating system. The
Platform Description shall only contain
printa…
OctetString
Constraints:
range: 0-79
 .1.3.6.1.3.94.5.2.2.1.8
connUnitPlatformLocation mandatory
The physical location of the platform
(e.g., telephone closet, 3rd floor). The
Platform Location shall only
contain printable ASCII characters.
OctetString
Constraints:
range: 0-79
 .1.3.6.1.3.94.5.2.2.1.9
connUnitPlatformManagementUrl mandatory
Primary management URL for the
platform. If the platform registers
more than one URL, then this URL is
equal to the first in the list.
OctetString
Constraints:
range: 0-79
 .1.3.6.1.3.94.5.2.2.1.10
connUnitPlatformNumNodes mandatory
Number of nodes contained in the
platform.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.3.94.5.2.2.1.11
connUnitPlatformNodeName mandatory
The name (WWN - world wide name)
of the node contained by the platform.
FcGlobalId
Textual Convention: FcGlobalId OctetString
Type Constraints:
range: 16
 .1.3.6.1.3.94.5.2.2.1.12