connUnitEventFilter

FCMGMT-MIB · .1.3.6.1.3.94.1.6.1.25
MIB view Table view

Object

column mandatory r/w FcEventSeverity 
This value defines the event severity
that will be logged by this connectivity unit.
All events of severity less than or equal to
connUnitEventFilter are logged in connUnitEventTable.
Persistent across boots.

Context

MIB
FCMGMT-MIB
OID
.1.3.6.1.3.94.1.6.1.25
Type
column
Access
readwrite
Status
mandatory
Parent
connUnitEntry
Table
connUnitTable
Siblings
30

Syntax

FcEventSeverity
Source
FcEventSeverity
Base type
Enumeration

Values & Constraints

Type Values
1unknown
2emergency
3alert
4critical
5error
6warning
7notify
8info
9debug
10mark

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
connUnitId mandatory
The unique identification for this connectivity unit among those within this proxy domain. The value MUST be unique within the proxy domain because it is the index variable for …
columnFcGlobalId.1.3.6.1.3.94.1.6.1.1
connUnitUrl mandatory
URL to launch a management application, if applicable. Otherwise empty string. In a standalone unit, this would be the same as the top-level URL. This has the same definition a…
columnRFC1213-MIBDisplayString.1.3.6.1.3.94.1.6.1.10
connUnitDomainId mandatory
24 bit Fibre Channel address ID of this connectivity unit, right justified with leading zero's if required. This should be set to the Fibre Channel address ID or if it is a swit…
columnOctetString.1.3.6.1.3.94.1.6.1.11
connUnitProxyMaster mandatory
A value of 'yes' means this is the proxy master unit for a set of managed units. For example, this could be the only unit with a management card in it for a set of units. A sta…
columnEnumeration.1.3.6.1.3.94.1.6.1.12
connUnitPrincipal mandatory
Whether this connectivity unit is the principal unit within the group of fabric elements. If this value is not applicable, return unknown.
columnEnumeration.1.3.6.1.3.94.1.6.1.13
connUnitNumSensors mandatory
Number of sensors in the connUnitSensorTable.
columnInteger32.1.3.6.1.3.94.1.6.1.14
connUnitStatusChangeTime obsolete
The sysuptime timestamp in centiseconds at which the last status change occurred.
columnRFC1155-SMITimeTicks.1.3.6.1.3.94.1.6.1.15
connUnitConfigurationChangeTime obsolete
The sysuptime timestamp in centiseconds at which the last configuration change occurred.
columnRFC1155-SMITimeTicks.1.3.6.1.3.94.1.6.1.16
connUnitNumRevs mandatory
The number of revisions in the connUnitRevsTable.
columnInteger32.1.3.6.1.3.94.1.6.1.17
connUnitNumZones obsolete
Number of zones defined in connUnitZoneTable.
columnInteger32.1.3.6.1.3.94.1.6.1.18
connUnitModuleId mandatory
This is a unique id, persistent between boots, that can be used to group a set of connUnits together into a module. The intended use would be to create a connUnit with a connUnitT…
columnFcGlobalId.1.3.6.1.3.94.1.6.1.19
connUnitGlobalId mandatory
An optional global-scope identifier for this connectivity unit. It MUST be a WWN for this connectivity unit or 16 octets of value zero. WWN formats requiring fewer than 16 octets…
columnFcGlobalId.1.3.6.1.3.94.1.6.1.2
connUnitName mandatory
A display string containing a name for this connectivity unit. This object value should be persistent between boots.
columnOctetString.1.3.6.1.3.94.1.6.1.20
connUnitInfo mandatory
A display string containing information about this connectivity unit. This object value should be persistent between boots.
columnRFC1213-MIBDisplayString.1.3.6.1.3.94.1.6.1.21
connUnitControl mandatory
This object is used to control the addressed connUnit. NOTE: 'Cold Start' and 'Warm Start' are as defined in MIB II and are not meant to be a factory reset. …
columnEnumeration.1.3.6.1.3.94.1.6.1.22
connUnitContact mandatory
Contact information for this connectivity unit. Persistent across boots.
columnOctetString.1.3.6.1.3.94.1.6.1.23
connUnitLocation mandatory
Location information for this connectivity unit.Persistent across boots.
columnOctetString.1.3.6.1.3.94.1.6.1.24
connUnitNumEvents mandatory
Number of events currently in the connUnitEventTable.
columnInteger32.1.3.6.1.3.94.1.6.1.26
connUnitMaxEvents mandatory
Max number of events that can be defined in connUnitEventTable.
columnInteger32.1.3.6.1.3.94.1.6.1.27
connUnitEventCurrID mandatory
The last used event id (connUnitEventIndex).
columnInteger32.1.3.6.1.3.94.1.6.1.28
connUnitFabricID mandatory
A globally unique value to identify the fabric that this ConnUnit belongs to, otherwise empty string. This would typically be equal to the connUnitGlobalID of the primary switch i…
columnFcGlobalId.1.3.6.1.3.94.1.6.1.29
connUnitType mandatory
The type of this connectivity unit.
columnFcUnitType.1.3.6.1.3.94.1.6.1.3
connUnitNumLinks mandatory
The number of links in the link table.
columnInteger32.1.3.6.1.3.94.1.6.1.30
connUnitVendorId mandatory
The connectivity unit vendor's name.
columnOctetString.1.3.6.1.3.94.1.6.1.31
connUnitNumports mandatory
Number of physical ports in the connectivity unit (internal/embedded, external).
columnInteger32.1.3.6.1.3.94.1.6.1.4
connUnitState mandatory
This object reports the overall state of the connectivity unit. The meaning of all values is essentially self-explanatory. Any of these values may occur with any of the ConnUnit…
columnEnumeration.1.3.6.1.3.94.1.6.1.5
connUnitStatus mandatory
Overall status of the connectivity unit. The goal of this object is to be the single poll point to check the status of the connunit. If there is any other component that has warni…
columnEnumeration.1.3.6.1.3.94.1.6.1.6
connUnitProduct mandatory
The connectivity unit vendor's product model name.
columnOctetString.1.3.6.1.3.94.1.6.1.7
connUnitSn mandatory
The serial number for this connectivity unit.
columnOctetString.1.3.6.1.3.94.1.6.1.8
connUnitUpTime mandatory
The number of centiseconds since the last unit initialization.
columnRFC1155-SMITimeTicks.1.3.6.1.3.94.1.6.1.9