connUnitPortStatus
FCMGMT-MIB ·
.1.3.6.1.3.94.1.10.1.7
Object
column
mandatory
Enumeration
An overall protocol status for the port. This value of connUnitPortState is not online, then this is reported Unknown.
Context
- MIB
- FCMGMT-MIB
- OID
.1.3.6.1.3.94.1.10.1.7- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- connUnitPortEntry
- Table
- connUnitPortTable
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unknown |
2 | unused |
3 | ready |
4 | warning |
5 | failure |
6 | notparticipating |
7 | initializing |
8 | bypass |
9 | ols |
10 | other |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| connUnitPortUnitId mandatory The connUnitId of the connectivity unit
that contains this port. | column | FcGlobalId | .1.3.6.1.3.94.1.10.1.1 |
| connUnitPortWwn mandatory The World Wide Name of the port
if applicable, otherwise all zeros. | column | FcGlobalId | .1.3.6.1.3.94.1.10.1.10 |
| connUnitPortFCId mandatory This is the assigned Fibre Channel ID of
this port. This value is expected to be
a Big Endian value of 24 bits. If this is
loop, then it is the ALPA that is connected.
If this is… | column | FcAddressId | .1.3.6.1.3.94.1.10.1.11 |
| connUnitPortSn mandatory The serial number of the unit (e.g., for
a GBIC). If this is not applicable, return
empty string. | column | OctetString | .1.3.6.1.3.94.1.10.1.12 |
| connUnitPortRevision mandatory The port revision (e.g., for a GBIC). | column | OctetString | .1.3.6.1.3.94.1.10.1.13 |
| connUnitPortVendor mandatory The port vendor (e.g., for a GBIC). | column | OctetString | .1.3.6.1.3.94.1.10.1.14 |
| connUnitPortSpeed mandatory The speed of the port in kilobytes per
second. | column | Integer32 | .1.3.6.1.3.94.1.10.1.15 |
| connUnitPortControl mandatory This object is used to control the addressed
connUnit's port. Valid commands are:
resetConnUnitPort: If the addressed connUnit
allows this operation to be perfo… | column | Enumeration | .1.3.6.1.3.94.1.10.1.16 |
| connUnitPortName mandatory A user-defined name for this port. This means that up to
DisplayString characters may be supported. If less than,
then the name will be truncated in the connunit. | column | RFC1213-MIBDisplayString | .1.3.6.1.3.94.1.10.1.17 |
| connUnitPortPhysicalNumber mandatory This is the internal port number this
port is known by. In many implementations,
this should be the same as connUnitPortIndex.
Some implementations may have an internal port
rep… | column | Integer32 | .1.3.6.1.3.94.1.10.1.18 |
| connUnitPortStatObject obsolete This contains the OID of the first object of the
table that contains the statistics for this particular
port. If this has a value of zero, then there are no
statistics available f… | column | ObjectIdentifier | .1.3.6.1.3.94.1.10.1.19 |
| connUnitPortIndex mandatory A unique value among all connUnitPortEntrys
on this connectivity unit, between 1 and
connUnitNumPort[connUnitPortUnitId]. | column | Integer32 | .1.3.6.1.3.94.1.10.1.2 |
| connUnitPortProtocolCap mandatory Bit mask that specifies the driver level
protocol capability of this port. If this is not
applicable, return all bits set to zero.
The bits have
the following defin… | column | OctetString | .1.3.6.1.3.94.1.10.1.20 |
| connUnitPortProtocolOp mandatory Bit mask that specifies the driver level
protocol(s) that are currently operational.
If this is not applicable, return all bits
set to zero. This object has the same
definition… | column | OctetString | .1.3.6.1.3.94.1.10.1.21 |
| connUnitPortNodeWwn mandatory The Node World Wide Name of the port
if applicable, otherwise all zeros.
This should have the same value for a
group of related ports. The container is
defined as the largest phy… | column | FcNameId | .1.3.6.1.3.94.1.10.1.22 |
| connUnitPortHWState mandatory The hardware detected state of the port. | column | Enumeration | .1.3.6.1.3.94.1.10.1.23 |
| connUnitPortType mandatory The port type. | column | Enumeration | .1.3.6.1.3.94.1.10.1.3 |
| connUnitPortFCClassCap mandatory Bit mask that specifies the classes
of service capability of this port. If this is not
applicable, return all bits set to zero.
The bits have
the following definiti… | column | OctetString | .1.3.6.1.3.94.1.10.1.4 |
| connUnitPortFCClassOp mandatory Bit mask that specifies the classes
of service that are currently operational.
If this is not applicable, return all bits
set to zero. This object has the same
definition as co… | column | OctetString | .1.3.6.1.3.94.1.10.1.5 |
| connUnitPortState mandatory The user selected state of the port hardware. | column | Enumeration | .1.3.6.1.3.94.1.10.1.6 |
| connUnitPortTransmitterType mandatory The technology of the port transceiver. | column | Enumeration | .1.3.6.1.3.94.1.10.1.8 |
| connUnitPortModuleType mandatory The module type of the port connector. | column | Enumeration | .1.3.6.1.3.94.1.10.1.9 |