DC-ISIS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
29
Rows
29
Columns
297

isisSysTable

table
.1.3.6.1.4.1.629.10.10.1.1.1 · 1 row entry · 53 columns
Open in standard view 
The set of instances of the Integrated IS-IS
protocol existing on the system.
isisSysEntry entry .1.3.6.1.4.1.629.10.10.1.1.1.1
Each row defines information specific to a single
instance of the IS-IS protocol existing on the system.
Indexes
isisSysInstance
Column Syntax OID
isisSysInstance
The unique identifier of the Integrated IS-IS
instance to which this row corresponds.
This object follows the index behavior.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.629.10.10.1.1.1.1.1
isisSysVersion
The version number of the IS-IS protocol that
is implemented.
Enumeration
Enumerated Values:
0unknown
1one
 .1.3.6.1.4.1.629.10.10.1.1.1.1.2
isisSysType
At which levels is the Intermediate System
running? This object follows the
replaceOnlyWhileDisabled behavior.
Enumerationr/w
Enumerated Values:
0reserved
1level1IS
2level2IS
3level1L2IS
 .1.3.6.1.4.1.629.10.10.1.1.1.1.3
isisSysID
The ID for this instance of the Integrated IS-IS
protocol. This value is appended to each of the
area addresses to form the Network Entity Titles.
The derivation of a value for this object is
implementation-specific. …
SystemIDr/w
Textual Convention: SystemID OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.629.10.10.1.1.1.1.4
isisSysMaxPathSplits
Maximum number of paths with equal routing metric value
which it is permitted to split between.

Note that, when IGP shortcut interfaces are in use, this
maximum applies individually to IGP shortcut paths …
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.629.10.10.1.1.1.1.5
isisSysMaxLSPGenInt
Maximum interval, in seconds, between generated LSPs
by this instance of the protocol. This object follows
the resettingTimer behavior. The value must be
greater than any value configured for
isisSysLevelMinLSPGenInt, …
secondsInteger32r/w
Constraints:
range: 1-65235
 .1.3.6.1.4.1.629.10.10.1.1.1.1.6
isisSysPollESHelloRate
The value, in seconds, to be used for the suggested ES
configuration timer in ISH PDUs when soliciting the ES
configuration.
secondsUnsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.629.10.10.1.1.1.1.7
isisSysWaitTime
Number of seconds to delay in waiting state before
entering on state. This object follows the resettingTimer
behavior.
secondsUnsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.629.10.10.1.1.1.1.8
isisSysAdminState
The administrative state of this instance of the
Integrated IS-IS protocol. Setting this object to the
value 'on' when its current value is 'off' enables operation
of this instance of the Integrated IS-IS protocol.
AdminStater/w
Textual Convention: AdminState Enumeration
Type Values:
1on
2off
 .1.3.6.1.4.1.629.10.10.1.1.1.1.9
isisSysL2toL1Leaking
If true, allow the router to leak L2 routes into L1.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.1.1.1.10
isisSysMaxAge
Value to place in RemainingLifeTime field of
the LSPs we generate.
This should be at least 300 seconds greater than
isisSysMaxLSPGenInt.
secondsUnsigned32r/w
Constraints:
range: 350-65535
 .1.3.6.1.4.1.629.10.10.1.1.1.1.11
isisSysReceiveLSPBufferSize
Size of the largest Buffer we are designed or
configured to store. This should be at least
as big as the maximum isisSysOrigLSPBuffSize
supported by the system.

If resources allow, we will store and floo…
bytesUnsigned32r/w
Constraints:
range: 1492-16000
 .1.3.6.1.4.1.629.10.10.1.1.1.1.12
isisSysExistState
The state of the IS-IS router. Turning this to
state 'destroy' forces the router to forget all
the current configuration. Setting the state to
'notInService' stops protocol processing, but
retains the configuration.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.629.10.10.1.1.1.1.13
isisSysOperStatus
The current operational status of this instance of the
Protocol Manager component of DC-ISIS.

Note that DC-ISIS can only activate if there is at least
one active entry in the isisManAreaAddrTable.
IsisOperStatus
Textual Convention: IsisOperStatus Enumeration
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
 .1.3.6.1.4.1.629.10.10.1.1.1.1.14
isisSysAllowAutoI3Config
If 'true' then add IP addresses received from the I3 stub
to the isisCircIPAddrTable with admin state 'on'. If
'false' then add them with admin state 'off'. This field
follows the replaceOnlyWhileDisabled behavior.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.1.1.1.15
isisSysCalcMaxDelay
The maximum delay before the Routing Table is
recalculated following a change to the Link State
Database. (Recalculation is delayed to reduce the
frequency of recalculations of the Routing Table).

This p…
millisecondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.1.1.1.16
isisSysCalcThrshUpdStart
This parameter can be used to override the routing
calculation delay indicated by the isisSysCalcMaxDelay
parameter when the number of updates to the Link State
Database reaches a threshold value.

This pa…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.629.10.10.1.1.1.1.17
isisSysCalcThrshUpdRestart
This parameter can be used to interrupt a full routing
calculation when the number of pending updates to the Link
State Database has reached a threshold value.

This parameter specifies the threshold numbe…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.629.10.10.1.1.1.1.18
isisSysCalcThrshRestartLimit
This parameter limits the number of consecutive times a
routing calculation can be interrupted by new updates.
This guarantees that the routing calculation will actually
complete.

- 1 indicates that once …
Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.629.10.10.1.1.1.1.19
isisSysCalcPauseFreq
This value determines how regularly a Routing Calculation
is paused. It is measured in points. The points scale
roughly maps to a time scale, so that the larger this value
is, the longer the Routing Calculation runs b…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.629.10.10.1.1.1.1.20
isisSysCheckChecksums
This value determines how often the checksums of LSPs in
the Link State Database are checked. If 0, no checksums
in the database are checked.
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.1.1.1.21
isisSysZeroAgeLifetime
This is the minimum amount of time in seconds for which the
header of an expired LSP shall be retained after it has
been flooded with zero Remaining Lifetime. All that is
required is that the header be retained until t…
secondsSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.10.1.1.1.1.22
isisSysNumUpdPending
The number of updates that are pending addition to the Link
State Database.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.1.1.1.23
isisSysNumUpdMerged
The number of updates that have been merged into the Link
State Database since the last routing calculation.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.1.1.1.24
isisSysNumCksumsPending
The number of LSPs in the Link State Database which are now
due to have their checksum checked.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.1.1.1.25
isisSysTEMetricPcntge
The Traffic Engineering metric is updated in real-time by
the I3 Stub. In order to increase performance and reduce
network traffic, this parameter determines the minimal
percentage change of the TE metric that causes a…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.10.1.1.1.1.26
isisSysMaxBwidthPcntge
The maximum bandwidth on an interface is updated in
real-time by the I3 Stub. In order to increase performance
and reduce network traffic, this parameter determines the
minimal percentage change of maximum bandwidth th…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.10.1.1.1.1.27
isisSysMaxResBwidthPcntge
The maximum reservable bandwidth on an interface is updated
in real-time by the I3 Stub. In order to increase
performance and reduce network traffic, this parameter
determines the minimal percentage change of maximum
r…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.10.1.1.1.1.28
isisSysUnresBwidthPcntge
The unreserved bandwidth on an interface is updated in
real-time by the I3 Stub. In order to increase performance
and reduce network traffic, this parameter determines the
minimal percentage change of unreserved bandwi…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.10.1.1.1.1.29
isisSysMaxLSPBwidthPcntge
The maximum LSP bandwidth for the various switching
descriptors on an interface is updated in real-time by the
I3 Stub. In order to increase performance and reduce
network traffic, this parameter determines the minimal…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.10.1.1.1.1.30
isisSysMinLSPBwidthPcntge
The minimum LSP bandwidth for the various switching
descriptors on an interface is updated in real-time by the
I3 Stub. In order to increase performance and reduce
network traffic, this parameter determines the minimal…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.10.1.1.1.1.31
isisSysMTUSizePcntge
The Maximum Transmission Unit size for the various
switching descriptors on an interface is updated in
real-time by the I3 Stub. In order to increase performance
and reduce network traffic, this parameter determines th…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.10.1.1.1.1.32
isisSysTERouterID
The Local IPv4 TE Router ID. This is a single stable IPv4
address that can always be referenced in a path that will
be reachable from multiple hops away, regardless of the
state of the node's interfaces.
…
OctetStringr/w
Constraints:
range: 4-4
range: 0-0
 .1.3.6.1.4.1.629.10.10.1.1.1.1.33
isisSysIPv6TERouterID
The Local IPv6 TE Router ID. This is a single stable IPv6
global address that can always be referenced in a path that
will be reachable from multiple hops away, regardless of
the state of the node's interfaces.
…
OctetStringr/w
Constraints:
range: 16-16
range: 0-0
 .1.3.6.1.4.1.629.10.10.1.1.1.1.34
isisSysMaxExternalRoutes
The maximum number of static routes and routes
redistributed from other protocols that DC-ISIS will
accept.

The action that DC-ISIS will take when the maximum is
exceeded is controlled by isisSysMaxExtern…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.1.1.1.35
isisSysMaxExternalRoutesAction
The action that DC-ISIS will take when the number of
external routes exceeds isisSysMaxExternalRoutes.

If set to 'log', DC-ISIS will alert the administrator by
logging that the limit has been exceeded.
…
Enumerationr/w
Enumerated Values:
1log
2suppressExternal
 .1.3.6.1.4.1.629.10.10.1.1.1.1.36
isisSysLspFullSuppress
The set of routes (if any) that will be removed from the
local LSP by DC-ISIS when the local LSP becomes full at
either level.

When set to 'external', all static routes and routes
redistributed from other…
Enumerationr/w
Enumerated Values:
1external
2none
 .1.3.6.1.4.1.629.10.10.1.1.1.1.37
isisSysLspFullSetDBOL
If set to 'true', DC-ISIS will set the database overload
flag in the local LSP (at all active levels) when the local
LSP becomes full (at either level).

The administrator can clear the database overload f…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.1.1.1.38
isisSysRestartHelpPeer
Indicates whether DC-ISIS implements the procedures defined
in the IS-IS restart RFC (3847) for helping a peer to restart.

Note that this object has no effect on the local restart
behavior, and so may be …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.1.1.1.39
isisSysRestartActivationType
This object is only used when DC-ISIS is manually activated
or deactivated (in other words, enters or leaves the state
with row status 'active' and admin status 'on'), and
indicates which restart procedures (if any) are…
IsisSysRestartTyper/w
Textual Convention: IsisSysRestartType Enumeration
Type Values:
0none
1start
2restart
 .1.3.6.1.4.1.629.10.10.1.1.1.1.40
isisSysRestartAutoResetType
There are cases where the IS-IS protocol requires the local
node to automatically deactivate and later reactivate.
This object indicates which restart procedures (if any) are
followed during such an automatic reset.
…
IsisSysRestartTyper/w
Textual Convention: IsisSysRestartType Enumeration
Type Values:
0none
1start
2restart
 .1.3.6.1.4.1.629.10.10.1.1.1.1.41
isisSysRestartAdjacencyWait
This object is only used when DC-ISIS activates with
the activation type (isisSysRestartActivationType or
isisSysRestartAutoResetType) set to 'start' or 'restart'.

It defines how long DC-ISIS will wait to…
secondsInteger32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.629.10.10.1.1.1.1.42
isisSysMaxRecoveryTime
This object is only used when DC-ISIS activates with
the activation type (isisSysRestartActivationType or
isisSysRestartAutoResetType) set to 'restart'.

It defines the maximum time that DC-ISIS will take …
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.629.10.10.1.1.1.1.43
isisSysClearStats
Set to 'true' to clear all system statistics, including the
isisSystemCounter and isisPacketCounter tables.

Note that isisSysStatsLSPCount is not reset by this object.

Reading the value of …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.1.1.1.44
isisSysSetAttached
If DC-ISIS is operating at both level 1 and level 2, this
field indicates how DC-ISIS should decide whether to set the
attached bit in its level 1 LSP.

- 'attachNoOverlapOrRedist' indicates that the atta…
Enumerationr/w
Enumerated Values:
1attachNoOverlapOrRedist
2attachNoOverlapOnly
3attachSet
4attachClear
 .1.3.6.1.4.1.629.10.10.1.1.1.1.45
isisSysProtSupported
This attribute contains the set of protocols supported by
this Intermediate System.
IsisAddrTypeBitsr/w
Textual Convention: IsisAddrTypeBits Bits
Type Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.629.10.10.1.1.1.1.46
isisSysRestrictLanAdjsToSubnet
This object only affects IPv4 broadcast circuits. If this
is set to 'true', DC-ISIS will only form adjacencies with
intermediate systems that are on the same subnet as the
local circuit. This object only has effect wh…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.1.1.1.47
isisSysHostName
The string that this instance of IS-IS will use as the
local hostname.

This is advertised to other Intermediate Systems in the
Dynamic Hostname TLV.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.629.10.10.1.1.1.1.48
isisSysCalcSoonAfterCircChange
Set this object to 'true' to minimize the delay before
triggering a routing calculation that includes any
relevant circuit change. This means a change to the local
neighbors (including pseudonodes), or to the reachable…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.1.1.1.49
isisSysSendNotifications
This attribute contains the set of notifications generated
by this Intermediate System.

The notifications that may be enabled are the
isisCircIndTable, isisDatabaseOverload,
isisManualAddressDrops, isisID…
Bitsr/w
Enumerated Values:
0circuitIndication
1databaseOverload
2manualAreaAddressDrops
3idLengthMismatch
4maxAreaAddressMismatch
5ownLspPurge
6areaMismatch
7rejectedAdjacency
8adjacencyChange
9lspErrorDetected
10attemptToExceedMaxSequence
11sequenceNumberSkip
12extPassCircuitInd
13operStateChange
14disChange
15lspAuthFailure
16helloAuthFailure
17attachStateChange
 .1.3.6.1.4.1.629.10.10.1.1.1.1.50
isisSysEnableIgpShortcut
Set isisSysEnableIgpShortcut to 'true' to enable IS-IS
routing over IGP shortcut interfaces.

Set isisSysEnableIgpShortcut to 'false' to disable IS-IS
routing over IGP shortcut interfaces. IS-IS will igno…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.1.1.1.51
isisSysI3EntityIndex
Identifies the I3 stub instance to which this
IS-IS instance should join.

The status of the join is given by the row in the
isisPmMjTable with isisPmMjInterface equal to
ifInterfaceInfo.

No…
DC-MASTER-TCNumericIndexr/w
Textual Convention: DC-MASTER-TCNumericIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.629.10.10.1.1.1.1.52
isisSysRtmPurgeTime
This object defines the maximum time that DC-ISIS will
wait when a Routing Table Manager (such as DC-RTM) fails
before purging routes.

In some systems, the Routing Table Manager may restart
independently …
secondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.629.10.10.1.1.1.1.53

isisManAreaAddrTable

table
.1.3.6.1.4.1.629.10.10.1.1.2 · 1 row entry · 2 columns
Open in standard view 
The set of manual area addresses configured on this
Intermediate System.
isisManAreaAddrEntry entry .1.3.6.1.4.1.629.10.10.1.1.2.1
Each entry contains one area address manually configured
on this system
Indexes
isisSysInstance isisManAreaAddr
Column Syntax OID
isisManAreaAddr
A manually configured area address for this system. This
object follows the index behavior.

Note: an index for the entry {1, {49.0001} active} in
this table would be the ordered pair
(1, (0x03 0x49 0x00 0…
OSINSAddress
Textual Convention: OSINSAddress OctetString
Type Constraints:
range: 0..20
 .1.3.6.1.4.1.629.10.10.1.1.2.1.1
isisManAreaAddrExistState
The state of the isisManAreaAddrEntry. This object
follows the Row Status behavior. If the isisSysAdminState
for this instance of the IS-IS protocol is 'on', and an
attempt is made to set this object to the value 'destr…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.629.10.10.1.1.2.1.2

isisAreaAddrTable

table
.1.3.6.1.4.1.629.10.10.1.1.3 · 1 row entry · 2 columns
Open in standard view 
The union of the sets of area addresses reported in all
Level 1 LSPs with segment number zero received by this
instance of the protocol from Intermediate Systems which
are reachable via Level 1 routing.
isisAreaAddrEntry entry .1.3.6.1.4.1.629.10.10.1.1.3.1
Each entry contains one area address reported in a
Level 1 LSP received by this instance of the IS-IS
protocol.

The DC-ISIS implementation ignores received area addresses
with a length of zero.
Indexes
isisSysInstance isisAreaAddr
Column Syntax OID
isisAreaAddr
An area address reported in a Level 1 LSP received by
this instance of the IS-IS protocol.

The DC-ISIS implementation ignores received area addresses
with a length of zero.
OSINSAddress
Textual Convention: OSINSAddress OctetString
Type Constraints:
range: 0..20
 .1.3.6.1.4.1.629.10.10.1.1.3.1.1
isisAreaAddrInLSP
Following ISO10589 section 7.1.5, we advertise the three
numerically lowest level 1 area addresses in the level 2
LSP fragment zero.

If 'true', then this area address is one of the three
numerically lowes…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.1.3.1.2

isisSummAddrTable

table
.1.3.6.1.4.1.629.10.10.1.1.5 · 1 row entry · 7 columns
Open in standard view 
The set of IP summary addresses to use in forming
summary TLVs originated by this Intermediate System.
          
An administrator may use a summary address to combine
and modify IP Reachability announcements.  If the
Intermediate system can reach any subset of the summary
address, the summary address will be announced instead,
at the configured metric.
isisSummAddrEntry entry .1.3.6.1.4.1.629.10.10.1.1.5.1
Each entry contains one IP summary address.
Indexes
isisSysInstance isisSummAddrMtId isisSummAddressType isisSummAddress isisSummAddrPrefixLen
Column Syntax OID
isisSummAddressType
The Type of IP address for this summary address.
This object follows the index behavior.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.629.10.10.1.1.5.1.1
isisSummAddress
The IP Address value for this summary address.
This object follows the index behavior.

The address must not contain any set host bits (bits set
after the address prefix determined by
isisSummAddrPrefixLen…
OctetString
Constraints:
range: 4-4
range: 16-16
 .1.3.6.1.4.1.629.10.10.1.1.5.1.2
isisSummAddrPrefixLen
The Length of the IP NetMask for this summary address.
Unsigned32
Constraints:
range: 0-128
 .1.3.6.1.4.1.629.10.10.1.1.5.1.3
isisSummAddrExistState
The existence state of this summary address. This object
follows the row status behavior.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.629.10.10.1.1.5.1.4
isisSummAddrMetric
The metric value to announce this summary
address with in LSPs generated by this system.
Integer32r/w
Constraints:
range: 1-63
 .1.3.6.1.4.1.629.10.10.1.1.5.1.5
isisSummAddrFullMetric
The wide metric value to announce this summary
address with in LSPs generated by this system.
FullMetricr/w
Textual Convention: FullMetric Unsigned32
 .1.3.6.1.4.1.629.10.10.1.1.5.1.6
isisSummAddrMtId
The topology that this summary address applies to. This
should be set to zero if multi-topology IS-IS is not
enabled. This object follows the index behavior.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.629.10.10.1.1.5.1.8

isisRedistributeAddrTable

table
.1.3.6.1.4.1.629.10.10.1.1.6 · 1 row entry · 5 columns
Open in standard view 
This table provides criteria to decide if a route should
be leaked from L2 to L1 when Domain Wide Prefix leaking is
enabled.
          
Addresses that match the summary mask in the table will
be announced at L1 by routers when isisSysL2toL1Leaking
is enabled.  Routes that fall into the ranges specified
are announced as is, without being summarized.  Routes
that do not match a summary mask are not announced.
isisRedistributeAddrEntry entry .1.3.6.1.4.1.629.10.10.1.1.6.1
Each entry contains one IP summary address to
manage leaking L2 addresses into L1.
Indexes
isisSysInstance isisRedistributeAddrMtId isisRedistributeAddrType isisRedistributeAddrAddress isisRedistributeAddrPrefixLen
Column Syntax OID
isisRedistributeAddrType
The Type of IP address for this summary address.
This object follows the index behavior.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.629.10.10.1.1.6.1.1
isisRedistributeAddrAddress
The IP Address value for this summary address.
This object follows the index behavior.

The address must not contain any set host bits (bits set
after the address prefix determined by
isisRedistributeAddrP…
OctetString
Constraints:
range: 16-16
range: 4-4
 .1.3.6.1.4.1.629.10.10.1.1.6.1.2
isisRedistributeAddrPrefixLen
The Length of the IP NetMask for this summary address.
Unsigned32
Constraints:
range: 0-128
 .1.3.6.1.4.1.629.10.10.1.1.6.1.3
isisRedistributeAddrExistState
The existence state of this summary address. This object
follows the row status behavior.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.629.10.10.1.1.6.1.4
isisRedistributeAddrMtId
The topology that this redistribution address applies to.
This should be set to zero if multi-topology IS-IS is not
enabled. This object follows the index behavior.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.629.10.10.1.1.6.1.6

isisRouterTable

table
.1.3.6.1.4.1.629.10.10.1.1.7 · 1 row entry · 5 columns
Open in standard view 
The set of hostnames and router ID.
isisRouterEntry entry .1.3.6.1.4.1.629.10.10.1.1.7.1
Each entry tracks information about one peer at
one level.
Indexes
isisSysInstance isisRouterSysID isisRouterLevel
Column Syntax OID
isisRouterSysID
The System ID of the Router Peer.
SystemID
Textual Convention: SystemID OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.629.10.10.1.1.7.1.1
isisRouterLevel
The level of this Intermediate System.
ISLevel
Textual Convention: ISLevel Enumeration
Type Values:
0none
1area
2domain
 .1.3.6.1.4.1.629.10.10.1.1.7.1.2
isisRouterHostName
The hostname listed in LSP, or NULL if none.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.629.10.10.1.1.7.1.3
isisRouterID
The Router ID of the Peer found in LSP, or NULL if none.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.1.7.1.4
isisRouterIPv6ID
The IPv6 TE Router ID found in the LSP, if any.
INET-ADDRESS-MIBInetAddressIPv6
Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.629.10.10.1.1.7.1.5

isisMtSysTable

table
.1.3.6.1.4.1.629.10.10.1.1.8 · 1 row entry · 6 columns
Open in standard view 
A row in this table represents the level of support for a
topology on this instance of the Integrated IS-IS protocol.
          
This table is only used when multi-topology IS-IS is
supported.
isisMtSysEntry entry .1.3.6.1.4.1.629.10.10.1.1.8.1
Each row defines information specific to a single topology on a
single instance of the IS-IS protocol existing on the system.
Indexes
isisSysInstance isisMtSysMtId
Column Syntax OID
isisMtSysMtId
The topology that this row represents.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.629.10.10.1.1.8.1.2
isisMtSysExistState
The state of the MIB row. Turning this to state 'destroy'
forces the router to forget all the current topology
configuration. Setting the state to 'notInService' stops
protocol processing for this topology, but retain…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.629.10.10.1.1.8.1.3
isisMtSysAdminState
The desired operational state of this topology on this
instance of the Integrated IS-IS protocol. Setting this
object to the value 'on' when its current value is 'off'
enables operation of this topology for this instan…
AdminStater/w
Textual Convention: AdminState Enumeration
Type Values:
1on
2off
 .1.3.6.1.4.1.629.10.10.1.1.8.1.4
isisMtSysOperState
The current operational status of this topology on this
instance of the Integrated IS-IS protocol.

If this is 'down' then the topology is not supported.
IsisOperStatus
Textual Convention: IsisOperStatus Enumeration
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
 .1.3.6.1.4.1.629.10.10.1.1.8.1.5
isisMtSysProtSupported
This attribute contains the set of protocols supported by
this topology on this Intermediate System.

Note that RFC 5120 assigns certain topologies to serve
pre-determined purposes (MT IDs 0 - 5). This li…
IsisAddrTypeBitsr/w
Textual Convention: IsisAddrTypeBits Bits
Type Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.629.10.10.1.1.8.1.6
isisMtSysDefaultActive
When set to 'true', corresponding rows in the
isisMtCircStatusTable have oper status 'up', unless a
corresponding row exists in the isisMtCircManConfigTable.

When set to 'false', corresponding rows in the…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.1.8.1.7

isisSysLevelTable

table
.1.3.6.1.4.1.629.10.10.1.2.1 · 1 row entry · 12 columns
Open in standard view 
Level specific information about an instance of IS-IS.
isisSysLevelEntry entry .1.3.6.1.4.1.629.10.10.1.2.1.1
Describe variables defined for Area or Domain.
Indexes
isisSysInstance isisSysLevelIndex
Column Syntax OID
isisSysLevelIndex
The level that this entry describes.
Enumeration
Enumerated Values:
0none
1level1IS
2level2IS
 .1.3.6.1.4.1.629.10.10.1.2.1.1.1
isisSysLevelOrigLSPBuffSize
The maximum size of LSPs and SNPs originated by
this Intermediate System at this level.
This object follows the replaceOnlyWhileDisabled
behavior.
LSPBuffSizer/w
Textual Convention: LSPBuffSize Integer32
Type Constraints:
range: 512..16000
 .1.3.6.1.4.1.629.10.10.1.2.1.1.2
isisSysLevelMinLSPGenInt
Minimum interval, in milliseconds, between successive
generation of LSPs with the same LSPID at this level
by this instance of the protocol. This object
follows the resettingTimer behavior.
millisecondsUnsigned32r/w
Constraints:
range: 1-65535000
 .1.3.6.1.4.1.629.10.10.1.2.1.1.3
isisSysLevelOverloadState
The Overload state of the database at this level.
The value 'overloaded' indicates a database that is
low on an essential resource, such as memory.
The administrator may indirectly force the state to
'waiting' when the …
LevelState
Textual Convention: LevelState Enumeration
Type Values:
1off
2on
3waiting
4overloaded
 .1.3.6.1.4.1.629.10.10.1.2.1.1.4
isisSysLevelSetOverload
Administratively set the overload bit for the level.
The overload bit will continue to be set if the
implementation runs out of memory, independent of
this variable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.2.1.1.5
isisSysLevelSetOverloadUntil
If set, the overload bit should be set, and cleared
after sysUpTime exceeds this value.
secondsSNMPv2-SMITimeTicksr/w
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.2.1.1.6
isisSysLevelMetricStyle
Which style of Metric do we generate in our LSPs
at this level?
MetricStyler/w
Textual Convention: MetricStyle Enumeration
Type Values:
1narrow
2wide
3both
 .1.3.6.1.4.1.629.10.10.1.2.1.1.7
isisSysLevelSPFConsiders
Which style of Metric do we consider in our SPF
computation at this level?
MetricStyler/w
Textual Convention: MetricStyle Enumeration
Type Values:
1narrow
2wide
3both
 .1.3.6.1.4.1.629.10.10.1.2.1.1.8
isisSysLevelTEEnabled
Do we do Traffic Engineering for IPv4 at this level?

If Traffic Engineering is enabled, isisSysLevelMetricStyle
must be set to 'wide' or 'both' for this level, and a value
must be configured for isisSysTE…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.2.1.1.9
isisSysLevelIPv6TEEnabled
Do we do Traffic Engineering for IPv6 at this level?

DC-ISIS only supports Traffic Engineering for IPv6 at
level 1.

If Traffic Engineering is enabled, a value must be
configured for isisSys…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.2.1.1.10
isisSysLevelRestartT2Duration
This object is only used when DC-ISIS activates with
the activation type (isisSysRestartActivationType or
isisSysRestartAutoResetType) set to 'start' or 'restart'.

It defines how long DC-ISIS will wait to…
secondsInteger32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.629.10.10.1.2.1.1.11
isisSysLevelAuthUser
Authentication user data for area/domain level
authentication.

This data is passed opaquely to the Metaswitch authentication
interface where it can be used to assist with
authentication decisions.
DC-MASTER-TCAuthUserDataStringr/w
Textual Convention: DC-MASTER-TCAuthUserDataString OctetString
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.629.10.10.1.2.1.1.12

isisCircTable

table
.1.3.6.1.4.1.629.10.10.1.3.2 · 1 row entry · 28 columns
Open in standard view 
The table of circuits used by each instance of
Integrated IS-IS on this system.
isisCircEntry entry .1.3.6.1.4.1.629.10.10.1.3.2.1
An isisCircEntry exists for each circuit used by
Integrated IS-IS on this system.
Indexes
isisSysInstance isisCircIndex
Column Syntax OID
isisCircIndex
The identifier of this circuit, unique within the
instance of the IS-IS protocol. This object follows
the index behavior. This is for SNMP Indexing
purposes only and need not have any relation to
any protocol value.
…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.629.10.10.1.3.2.1.1
isisCircIfIndex
The value of ifIndex for the interface to which this
circuit corresponds. This object cannot be modified
after creation.

In DC-ISIS this is also used as the 3-way circuit ID
on point-to-point circuits, …
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.629.10.10.1.3.2.1.2
isisCircIfSubIndex
A specifier for the part of the interface ifIndex to which
this circuit corresponds, such as a DLCI or VPI/VCI.
This object cannot be modified after creation.

In DC-ISIS this field is ignored.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.10.1.3.2.1.3
isisCircAdminState
The administrative state of the circuit. This
object follows the AdminState behavior.

In DC-ISIS the default admin state for a new automatic
circuit is 'on' if the isisSysAllowAutoI3Config field is
'true'…
AdminStater/w
Textual Convention: AdminState Enumeration
Type Values:
1on
2off
 .1.3.6.1.4.1.629.10.10.1.3.2.1.4
isisCircExistState
The existence state of this circuit. This object follows
the Row Status behavior. Setting the state to
'notInService' halts the generation and processing of
IS-IS protocol PDUs on this circuit. Setting the state
to de…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.629.10.10.1.3.2.1.5
isisCircType
The type of the circuit. This object follows the
replaceOnlyWhileDisabled behavior. The type specified
must be compatible with the type of the interface defined
by the value of isisCircIfIndex.

In DC-ISIS…
Enumerationr/w
Enumerated Values:
0unknown
1broadcast
2ptToPt
3staticIn
4staticOut
5dA
 .1.3.6.1.4.1.629.10.10.1.3.2.1.6
isisCircExtDomain
If true, suppress normal transmission of and
interpretation of Intra-domain IS-IS PDUs on this
circuit.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.3.2.1.7
isisCircLevel
Indicates which type of packets will be sent and
accepted on this circuit. The values used will be
modified by the settings of isisSysType. This
object follows the replaceOnlyWhileDisabled behavior.
Enumerationr/w
Enumerated Values:
0reserved
1level1
2level2
3level1L2
 .1.3.6.1.4.1.629.10.10.1.3.2.1.8
isisCircPassiveCircuit
Should we include this interface in LSPs, even if
it is not running the IS-IS Protocol?

In DC-ISIS, circuits with isisCircExtDomain 'true'
will only be included in LSPs if this field is
also 'true', and t…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.3.2.1.9
isisCircMeshGroupEnabled
Is this port a member of a mesh group, or blocked?
Circuits in the same mesh group act as a virtual
multiaccess network. LSPs seen on one circuit in
a mesh group will not be flooded to another circuit
in the same mesh …
Enumerationr/w
Enumerated Values:
1inactive
2blocked
3set
 .1.3.6.1.4.1.629.10.10.1.3.2.1.10
isisCircMeshGroup
Circuits in the same mesh group act as a virtual
multiaccess network. LSPs seen on one circuit in
a mesh group will not be flooded to another circuit
in the same mesh group. If isisCircMeshGroupEnabled
is inactive or …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.3.2.1.11
isisCircSmallHellos
Can we send unpadded hellos on LAN circuits? False
means LAN Hellos must be padded.
Implementations should allow the administrator to read
this value. An implementation need not be able to
support unpadded hellos to b…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.3.2.1.12
isisCircLastUpTime
If the circuit is enabled, the value of sysUpTime
when isisCircAdminState most recently entered
the state on. If the circuit is not on,
the value of sysUpTime when the circuit last
entered state on, 0 if the circuit ha…
secondsSNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.3.2.1.13
isisCirc3WayEnabled
Is this circuit enabled to run 3Way handshake?

DC-ISIS will always run the 3-way handshake on point to
point circuits, and so this object is read-only.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.3.2.1.14
isisCircExtendedCircID
The value to be used as the extended circuit ID in
3Way handshake. This value is only used if
isisCirc3WayEnabled is true, and must be unique across
all circuits on this IS.

DC-ISIS uses the value for is…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.3.2.1.15
isisCircOperState
The operational state of this circuit.
IsisOperStatus
Textual Convention: IsisOperStatus Enumeration
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
 .1.3.6.1.4.1.629.10.10.1.3.2.1.16
isisCircSdEntityIndex
Identifies the SDC entity which will handle this circuit.
This object must be specified before the circuit can run the
IS-IS protocol. It cannot be changed after it has been
specified.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.629.10.10.1.3.2.1.17
isisCircDlBuffPoolSize
Capacity of the buffer pool used by the DL stub to send
data signals to the SDC. This object follows the
replaceOnlyWhileDisabled behavior.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.3.2.1.18
isisCircSdPDUBuffPoolSize
Capacity of the buffer pool into which SDC transfers data
signals from the DL Stub. This object follows the
replaceOnlyWhileDisabled behavior.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.3.2.1.19
isisCircSdIndBuffPoolSize
Capacity of the buffer pool used by SDC to send
indications to PM. This object follows the
replaceOnlyWhileDisabled behavior.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.3.2.1.20
isisCircDataLinkBlockSize
Maximum size of PDU that can be sent or received over this
circuit (MTU). This object follows the
replaceOnlyWhileDisabled behavior.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.3.2.1.21
isisCircPhysicalAddress
The physical address of the network interface (for example
a MAC address on an Ethernet card). This value is only
relevant to a broadcast circuit and is ignored on a
point-to-point circuit. It needs to be specified in…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.629.10.10.1.3.2.1.22
isisCircManualOrAutomatic
Has this circuit been configured by MIB (manual), I3
information (automatic) or both? MIB configuration
overrides I3 configuration.

Automatic circuits cannot be destroyed. Destroying a
manual circuit re…
Enumeration
Enumerated Values:
1manual
2automatic
3both
 .1.3.6.1.4.1.629.10.10.1.3.2.1.23
isisCircT1TimerRunning
Is the T1 timer running on this circuit?

This object is only valid on a circuit that is currently
running the IS-IS protocol (isisCircExtDomain is 'false'
and isisCircOperState is 'operStatusUp').
…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.3.2.1.24
isisCircProtSupported
Which protocols are supported on this circuit?

Note that the configured value is used in conjunction with
the value of isisSysProtSupported. In particular:

- IPv4 is supported on the circ…
IsisAddrTypeBitsr/w
Textual Convention: IsisAddrTypeBits Bits
Type Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.629.10.10.1.3.2.1.25
isisCircPtToPtOverLAN
Allows a broadcast circuit to be configured to operate
point-to-point over LAN procedures.

This is used in conjunction with the isisCircType object
as follows.

- If isisCircType = 'ptToPt'…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.3.2.1.26
isisCircProtBfdDesired
Indicates the protocols running on this circuit for which
Bidirectional Forwarding Detection (BFD) is desired.

If isisCircProtBfdDesired is clear for an address type,
then BFD sessions are not established…
IsisAddrTypeBitsr/w
Textual Convention: IsisAddrTypeBits Bits
Type Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.629.10.10.1.3.2.1.28
isisCircIfName
The textual name of the interface. The value of this
object should be the name of the interface as assigned by
the local device and should be suitable for use in
commands entered at the device's 'console'. This might …
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.629.10.10.1.3.2.1.29

isisCircIPAddrTable

table
.1.3.6.1.4.1.629.10.10.1.3.3 · 1 row entry · 7 columns
Open in standard view 
This table contains the set of IP Addresses configured on
all circuits.
isisCircIPAddrEntry entry .1.3.6.1.4.1.629.10.10.1.3.3.1
Each entry contains one IP Address configured on a
circuit.
Indexes
isisSysInstance isisCircIndex isisCircIPAddrManOrAuto isisCircIPAddrIndex
Column Syntax OID
isisCircIPAddrManOrAuto
The type of IP address. Those of type manual are created
by the network manager. Those of type automatic are
created through propagation of interface information from
the I3 stub. This object cannot be modified after
…
Enumeration
Enumerated Values:
1manual
2automatic
3both
 .1.3.6.1.4.1.629.10.10.1.3.3.1.1
isisCircIPAddrIndex
An index to this table which identifies the IP addresss
to which this entry belongs. This object follows the
manualOrAutomatic behavior.
Integer32
Constraints:
range: 1-2000000000
 .1.3.6.1.4.1.629.10.10.1.3.3.1.2
isisCircIPAddrRowStatus
The existence state of this IP address. This object
follows the RowStatus and manualOrAutomatic behaviors.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.629.10.10.1.3.3.1.3
isisCircIPAddrAdminState
Administrative state of this IP address. This object
follows the AdminState and manualOrAutomatic behaviors.

The system level isisSysAllowAutoI3Config field defines the
initial administrative state for I…
AdminStater/w
Textual Convention: AdminState Enumeration
Type Values:
1on
2off
 .1.3.6.1.4.1.629.10.10.1.3.3.1.4
isisCircIPAddrAddressType
The Inet type of this IP Address. This object follows the
manualOrAutomatic behavior.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.629.10.10.1.3.3.1.5
isisCircIPAddrAddress
One IP Address configured on this circuit. This field must
be present on row creation and cannot be modified after
creation.

This address must be unique among all manual IP addresses
configured on this c…
OctetStringr/w
Constraints:
range: 16-16
range: 4-4
 .1.3.6.1.4.1.629.10.10.1.3.3.1.6
isisCircIPAddrInLSP
Is this IP address advertised in TLV 132 in LSPs sent out
by this intermediate system? This object follows the
manualOrAutomatic behavior.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.3.3.1.7

isisMtCircManConfigTable

table
.1.3.6.1.4.1.629.10.10.1.3.4 · 1 row entry · 6 columns
Open in standard view 
A row in this table represents the manual configuration of
support for a topology on this circuit.
          
Rows in this table are created and destroyed by an
administrator to provide per-circuit multi-topology
configuration.
          
Note that the presence of a row in this table overrides the
default multi-topology settings for the given circuit and
topology.
isisMtCircManConfigEntry entry .1.3.6.1.4.1.629.10.10.1.3.4.1
An isisMtCircManConfigEntry is created to provide
multi-topology specifc circuit configuration.
Indexes
isisSysInstance isisCircIndex isisMtCircManMtId
Column Syntax OID
isisMtCircManMtId
The topology that this row represents.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.629.10.10.1.3.4.1.3
isisMtCircManExistState
The state of the MIB row. Turning this to state 'destroy'
forces the router to forget the manually configured
multi-topology configuration for this circuit. Setting
the state to 'notInService' stops the manual
multi-t…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.629.10.10.1.3.4.1.4
isisMtCircManAdminState
The desired operational state for the manual configuration
of this topology on this circuit. Setting this object to
the value 'on' when its current value is 'off' enables use
of the manual configuration for this topolo…
AdminStater/w
Textual Convention: AdminState Enumeration
Type Values:
1on
2off
 .1.3.6.1.4.1.629.10.10.1.3.4.1.5
isisMtCircManOperState
The current operational status of the manual configuration
for this topology on this circuit.
IsisOperStatus
Textual Convention: IsisOperStatus Enumeration
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
 .1.3.6.1.4.1.629.10.10.1.3.4.1.6
isisMtCircManL1WideMetric
The level 1 wide metric value of this circuit for this
topology. Note that topologies other than MT ID 0 always
use wide metrics.

For multi-topology ID zero (the base topology), this field
is read only. …
WideMetricr/w
Textual Convention: WideMetric Unsigned32
Type Constraints:
range: 1..16777215
 .1.3.6.1.4.1.629.10.10.1.3.4.1.7
isisMtCircManL2WideMetric
The level 2 wide metric value of this circuit for this
topology. Note that topologies other than MT ID 0 always
use wide metrics.

For multi-topology ID zero (the base topology), this field
is read only. …
WideMetricr/w
Textual Convention: WideMetric Unsigned32
Type Constraints:
range: 1..16777215
 .1.3.6.1.4.1.629.10.10.1.3.4.1.8

isisMtCircStatusTable

table
.1.3.6.1.4.1.629.10.10.1.3.5 · 1 row entry · 4 columns
Open in standard view 
A row in this table represents the current support for a
topology on this circuit.
          
A row exists in this table for every row in the
isisCircTable and every row in the isisMtSysTable.
isisMtCircStatusEntry entry .1.3.6.1.4.1.629.10.10.1.3.5.1
An isisMtCircStatusEntry details the status of a topology
on a circuit.
Indexes
isisSysInstance isisCircIndex isisMtCircStatusMtId
Column Syntax OID
isisMtCircStatusMtId
The topology that this row represents.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.629.10.10.1.3.5.1.3
isisMtCircStatusOperState
The current operational state of this topology on this
circuit.

If no corresponding row exists in the
isisMtCircManConfigTable then this is derived from the
isisMtSysDefaultActive field in the isisMtSysTa…
IsisOperStatus
Textual Convention: IsisOperStatus Enumeration
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
 .1.3.6.1.4.1.629.10.10.1.3.5.1.4
isisMtCircStatusL1WideMetric
The level 1 wide metric value of this circuit for this
topology. Note that topologies other than MT ID 0 always
use wide metrics.

If no corresponding row exists in the
isisMtCircManConfigTable then this …
WideMetric
Textual Convention: WideMetric Unsigned32
Type Constraints:
range: 1..16777215
 .1.3.6.1.4.1.629.10.10.1.3.5.1.5
isisMtCircStatusL2WideMetric
The level 2 wide metric value of this circuit for this
topology. Note that topologies other than MT ID 0 always
use wide metrics.

If no corresponding row exists in the
isisMtCircManConfigTable then this …
WideMetric
Textual Convention: WideMetric Unsigned32
Type Constraints:
range: 1..16777215
 .1.3.6.1.4.1.629.10.10.1.3.5.1.6

isisCircLevelTable

table
.1.3.6.1.4.1.629.10.10.1.4.1 · 1 row entry · 19 columns
Open in standard view 
Level specific information about circuits used by IS-IS.
isisCircLevelEntry entry .1.3.6.1.4.1.629.10.10.1.4.1.1
An isisCircLevelEntry exists for each level on
each circuit used by Integrated IS-IS on this system.
Indexes
isisSysInstance isisCircIndex isisCircLevelIndex
Column Syntax OID
isisCircLevelIndex
The level that this entry describes.
Enumeration
Enumerated Values:
0none
1level1IS
2level2IS
 .1.3.6.1.4.1.629.10.10.1.4.1.1.1
isisCircLevelMetric
The metric value of this circuit for this level.
Integer32r/w
Constraints:
range: 1-63
 .1.3.6.1.4.1.629.10.10.1.4.1.1.2
isisCircLevelWideMetric
The wide metric value of this circuit for this level.
WideMetricr/w
Textual Convention: WideMetric Unsigned32
Type Constraints:
range: 1..16777215
 .1.3.6.1.4.1.629.10.10.1.4.1.1.3
isisCircLevelISPriority
The priority for becoming LAN Designated
Intermediate System at this level.
ISPriorityr/w
Textual Convention: ISPriority Integer32
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.629.10.10.1.4.1.1.4
isisCircLevelIDOctet
A one byte identifier for the circuit selected by the
Intermediate System.

On point-to-point circuits, the value is used as the Local
Circuit ID in point-to-point IIH PDUs transmitted on this
circuit. In…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.629.10.10.1.4.1.1.5
isisCircLevelID
On a point to point circuit with a fully initialized
adjacency to a peer IS, the value of this object is
the circuit ID negotiated during adjacency initialization.
On a point to point circuit without such an adjacency,
…
CircuitID
Textual Convention: CircuitID OctetString
Type Constraints:
range: 0
range: 7
 .1.3.6.1.4.1.629.10.10.1.4.1.1.6
isisCircLevelDesIS
The ID of the LAN Designated Intermediate System
on this circuit at this level. If, for any reason,
this system is not partaking in the relevant
Designated Intermediate System election process,
then the value returned i…
CircuitID
Textual Convention: CircuitID OctetString
Type Constraints:
range: 0
range: 7
 .1.3.6.1.4.1.629.10.10.1.4.1.1.7
isisCircLevelHelloMultiplier
This value is multiplied by the corresponding HelloTimer
and the result in seconds (rounded up) is used as the
holding time in transmitted hellos, to be used by
receivers of hello packets from this IS.
Integer32r/w
Constraints:
range: 2-100
 .1.3.6.1.4.1.629.10.10.1.4.1.1.8
isisCircLevelHelloTimer
Maximum period, in milliseconds, between IIH PDUs
on multiaccess networks at this level for LANs.
The value at L1 is used as the period between
Hellos on L1L2 point to point circuits. Setting
this value at level 2 on a…
millisecondsInteger32r/w
Constraints:
range: 10-600000
 .1.3.6.1.4.1.629.10.10.1.4.1.1.9
isisCircLevelDRHelloTimer
Period, in milliseconds, between Hello PDUs on
multiaccess networks when this IS is the Designated
Intermediate System. This object follows the
resettingTimer behavior.
millisecondsInteger32r/w
Constraints:
range: 10-120000
 .1.3.6.1.4.1.629.10.10.1.4.1.1.10
isisCircLevelLSPThrottle
Minimal interval of time, in milliseconds, between
transmissions of LSPs on an interface at this level.
millisecondsUnsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.629.10.10.1.4.1.1.11
isisCircLevelMinLSPRetransInt
Minimum interval, in milliseconds, between re-transmission of
an LSP at this level. This object follows the
resettingTimer behavior.

Note that isisCircLevelLSPThrottle controls
how fast we send back to ba…
millisecondsInteger32r/w
Constraints:
range: 1-300000
 .1.3.6.1.4.1.629.10.10.1.4.1.1.12
isisCircLevelCSNPInterval
Interval of time, in seconds, between periodic
transmission of a complete set of CSNPs on
multiaccess networks if this router is the
designated router at this level.
This object follows the resettingTimer behavior.
secondsInteger32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.629.10.10.1.4.1.1.13
isisCircLevelPartSNPInterval
Minimum interval in seconds between sending Partial
Sequence Number PDUs at this level. This object
follows the resettingTimer behavior.
secondsInteger32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.629.10.10.1.4.1.1.14
isisCircLevelStickyDIS
Boost to add to the priority of this router (up to the maximum
permitted value) when it becomes DIS at this level to make it
more likely to remain DIS.
Integer32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.629.10.10.1.4.1.1.15
isisCircLevelAuthUser
Authentication user data for this level's authentication.
This data is passed opaquely to the Metaswitch authentication
interface where it can be used to assist with
authentication decisions.
DC-MASTER-TCAuthUserDataStringr/w
Textual Convention: DC-MASTER-TCAuthUserDataString OctetString
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.629.10.10.1.4.1.1.16
isisCircLevelIDHostname
The hostname corresponding to the system ID part of the
isisCircLevelID object.

This is the null string if the isisCircLevelID object
is null, or if no hostname is known.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.629.10.10.1.4.1.1.17
isisCircLevelDesISHostname
The hostname corresponding to the system ID part of the
isisCircLevelDesIS object.

This is the null string if the isisCircLevelDesIS object
is null, or if no hostname is known.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.629.10.10.1.4.1.1.18
isisCircLevelMinLSPArrivalInt
The minimum interval between reception of new instances of
a particular LSP. LSP instances received at higher
frequencies are discarded. If set to zero then no check
is made on the frequency of LSP reception.
…
millisecondsInteger32r/w
Constraints:
range: 0-60000
 .1.3.6.1.4.1.629.10.10.1.4.1.1.19

isisSystemCounterTable

table
.1.3.6.1.4.1.629.10.10.1.5.1 · 1 row entry · 26 columns
Open in standard view 
System wide counters for one instance of the IS-IS
protocol on the system.
isisSystemCounterEntry entry .1.3.6.1.4.1.629.10.10.1.5.1.1
System-wide IS-IS counters.
Indexes
isisSysInstance isisSysStatLevel
Column Syntax OID
isisSysStatLevel
The level that this entry describes.
Enumeration
Enumerated Values:
0none
1level1IS
2level2IS
 .1.3.6.1.4.1.629.10.10.1.5.1.1.1
isisSysStatCorrLSPs
Number of corrupted in-memory LSPs detected.

LSPs received from the wire with a bad checksum
are silently dropped and not counted.

LSPs received from the wire with parse errors
are counted …
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.2
isisSysStatAuthTypeFails
The number of authentication type mismatches recognized
by this instance of the protocol.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.3
isisSysStatAuthFails
The number of authentication failures recognized by this
instance of the protocol.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.4
isisSysStatLSPDbaseOloads
Number of times the LSP database has become
overloaded.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.5
isisSysStatManAddrDropFromAreas
Number of times a manual address has been dropped from
the area.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.6
isisSysStatAttmptToExMaxSeqNums
Number of times the IS has attempted to exceed the
maximum sequence number.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.7
isisSysStatSeqNumSkips
Number of times a sequence number skip has occurred.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.8
isisSysStatOwnLSPPurges
Number of times a zero-aged copy of the system's own LSP
is received from some other node.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.9
isisSysStatIDFieldLenMismatches
Number of times a PDU is received with a different value
for ID field length to that of the receiving system.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.10
isisSysStatPartChanges
Partition changes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.11
isisSysStatSPFRuns
Number of times we ran SPF at this level.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.12
isisSysStatLSPError
The count of badly formed LSPs discarded by
the PM component of DC-ISIS.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.13
isisSysStatCSNPError
The count of badly formed CSNPs discarded by
the PM component of DC-ISIS.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.14
isisSysStatPSNPError
The count of badly formed PSNPs discarded by
the PM component of DC-ISIS.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.15
isisSysStatLSPQueueLen
The count of received LSPs that are queued internally
in the PM component of DC-ISIS, awaiting processing.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.16
isisSysStatFragsRebuilt
Number of LSP fragments that the local system has generated.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.17
isisSysStatLSPRexmits
Number of LSPs that have been retransmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.18
isisSysStatLSPRegens
Number of LSPs that have been regenerated.
An LSP is regenerated when it is nearing the
end of its lifetime and it has not changed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.19
isisSysStatPurgesInitiated
Number of LSP purges that have been initiated
by this instance of IS-IS.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.20
isisSysStatLSPCount
The number of LSPs in the database at this level.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.21
isisSysStatPurgesIniLocal
Number of LSP purges initiated by this instance of IS-IS, of LSPs
that were originated locally.

This field behaves like an SNMP counter. It only increases,
never decreases, and is subject to wrap.
…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.23
isisSysStatPurgesIniRemote
Number of LSP purges initiated by this instance of IS-IS, of LSPs
that were originated remotely.

This field behaves like an SNMP counter. It only increases,
never decreases, and is subject to wrap.
…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.24
isisSysStatPurgesIniRemSNP
Number of LSP purges initiated by this instance of IS-IS, of LSPs
that were originated remotely, due to receiving a SNP.

This field behaves like an SNMP counter. It only increases,
never decreases, and i…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.25
isisSysStatPurgesIniRemExp
Number of LSP purges initiated by this instance of IS-IS, of LSPs
that were originated remotely, because they have
expired.

This field behaves like an SNMP counter. It only increases,
never decreases, an…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.26
isisSysStatPurgesIniRemPrs
Number of LSP purges initiated by this instance of IS-IS, of LSPs
that were originated remotely, due to peer restart.

This field behaves like an SNMP counter. It only increases,
never decreases, and is s…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.1.1.27

isisCircuitCounterTable

table
.1.3.6.1.4.1.629.10.10.1.5.2 · 1 row entry · 10 columns
Open in standard view 
Circuit specific counters for this
Intermediate System.
isisCircuitCounterEntry entry .1.3.6.1.4.1.629.10.10.1.5.2.1
An isisCircuitCounterEntry exists for each circuit
used by Integrated IS-IS on this system.
Indexes
isisSysInstance isisCircIndex isisCircuitType
Column Syntax OID
isisCircuitType
What type of circuit saw these counts?

The point to point Hello PDU includes
both L1 and L2, and ISs form a single
adjacency on point to point links.
Thus we combine counts on
point to point links into on…
Enumeration
Enumerated Values:
1lanlevel1
2lanlevel2
3p2pcircuit
 .1.3.6.1.4.1.629.10.10.1.5.2.1.1
isisCircAdjChanges
The number of times an adjacency state change has
occurred on this circuit.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.2.1.2
isisCircNumAdj
The number of adjacencies on this circuit.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.2.1.3
isisCircInitFails
The number of times initialization of this circuit has
failed. This counts events such as PPP NCP failures.
Failures to form an adjacency are counted by
isisCircRejAdjs.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.2.1.4
isisCircRejAdjs
The number of times an adjacency has been rejected on
this circuit.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.2.1.5
isisCircIDFieldLenMismatches
The number of times an IS-IS control PDU with an ID
field length different to that for this system has been
received.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.2.1.6
isisCircMaxAreaAddrMismatches
The number of times an IS-IS control PDU with a
max area address field different to that for this
system has been received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.2.1.7
isisCircAuthTypeFails
The number of times an IS-IS control PDU with
an auth type field different to that for this
system has been received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.2.1.8
isisCircAuthFails
The number of times an IS-IS control PDU with
the correct auth type has failed to pass authentication
validation.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.2.1.9
isisCircLANDesISChanges
The number of times the Designated IS has changed
on this circuit at this level. If the circuit is
point to point, this count is zero.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.2.1.10

isisPacketCounterTable

table
.1.3.6.1.4.1.629.10.10.1.5.3 · 1 row entry · 13 columns
Open in standard view 
Information about IS-IS protocol traffic at one level
on one circuit in one direction.
isisPacketCounterEntry entry .1.3.6.1.4.1.629.10.10.1.5.3.1
Information about IS-IS protocol traffic at one level
on one circuit in one direction
Indexes
isisSysInstance isisCircIndex isisPacketCountLevel isisPacketCountDirection
Column Syntax OID
isisPacketCountLevel
The level at which these PDU counts have been collected.
Enumeration
Enumerated Values:
0none
1level1
2level2
 .1.3.6.1.4.1.629.10.10.1.5.3.1.1
isisPacketCountDirection
Were we sending or receiving these PDUs?
Enumeration
Enumerated Values:
1sending
2receiving
 .1.3.6.1.4.1.629.10.10.1.5.3.1.2
isisPacketCountIIHello
The number of IS-IS Hello PDUs seen in this
direction at this level.

Point-to-Point IIH PDUs are counted at
the lowest enabled level: at L1 on L1 or L1L2 circuits,
and at L2 otherwise.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.3.1.3
isisPacketCountISHello
The number of ES-IS Hello PDUs seen in this
direction. ISH PDUs are counted at the
lowest enabled level: at L1 on L1 or L1L2
circuits, and at L2 otherwise.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.3.1.4
isisPacketCountESHello
The number of ES Hello PDUs seen in this
direction. ESH PDUs are counted at the
lowest enabled level: at L1 on L1 or L1L2
circuits, and at L2 otherwise.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.3.1.5
isisPacketCountLSP
The number of IS-IS LSPs seen in this
direction at this level.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.3.1.6
isisPacketCountCSNP
The number of IS-IS CSNPs seen in this
direction at this level.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.3.1.7
isisPacketCountPSNP
The number of IS-IS PSNPs seen in this
direction at this level.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.3.1.8
isisPacketCountUnknown
The number of unknown IS-IS PDUs seen
at this level.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.3.1.9
isisPacketCountDiscardedIIH
The number of IIH PDUs that have been discarded.
This field is always zero for outgoing PDUs.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.3.1.10
isisPacketCountDiscardedLSP
The number of LSP PDUs that have been discarded
by the SDC component of DC-ISIS.
This field is always zero for outgoing PDUs.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.3.1.11
isisPacketCountDiscardedCSNP
The number of CSNP PDUs that have been discarded
by the SDC component of DC-ISIS.
This field is always zero for outgoing PDUs.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.3.1.12
isisPacketCountDiscardedPSNP
The number of PSNP PDUs that have been discarded
by the SDC component of DC-ISIS.
This field is always zero for outgoing PDUs.
framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.5.3.1.13

isisISAdjTable

table
.1.3.6.1.4.1.629.10.10.1.6.1 · 1 row entry · 17 columns
Open in standard view 
The table of adjacencies to Intermediate Systems.
isisISAdjEntry entry .1.3.6.1.4.1.629.10.10.1.6.1.1
Each entry corresponds to one adjacency to an
Intermediate System on this system.
Indexes
isisSysInstance isisCircIndex isisISAdjIndex
Column Syntax OID
isisISAdjIndex
A unique value identifying the IS adjacency from all
other such adjacencies on this circuit. This value is
automatically assigned by the system when the adjacency
is created.
Integer32
Constraints:
range: 1-2000000000
 .1.3.6.1.4.1.629.10.10.1.6.1.1.1
isisISAdjState
The state of the adjacency.
Enumeration
Enumerated Values:
1down
2initializing
3up
4failed
 .1.3.6.1.4.1.629.10.10.1.6.1.1.2
isisISAdj3WayState
The 3Way state of the adjacency. These are picked
to match the historical on-the-wire representation
of the 3Way state, and are not intended to match
isisISAdjState.
Enumeration
Enumerated Values:
0up
1initializing
2down
3failed
 .1.3.6.1.4.1.629.10.10.1.6.1.1.3
isisISAdjNeighSNPAAddress
The SNPA address of the neighboring system.
OSINSAddress
Textual Convention: OSINSAddress OctetString
Type Constraints:
range: 0..20
 .1.3.6.1.4.1.629.10.10.1.6.1.1.4
isisISAdjNeighSysType
The type of the neighboring system.
Enumeration
Enumerated Values:
1l1IntermediateSystem
2l2IntermediateSystem
3l1L2IntermediateSystem
4unknown
 .1.3.6.1.4.1.629.10.10.1.6.1.1.5
isisISAdjNeighSysID
The system ID of the neighboring Intermediate
System.
SystemID
Textual Convention: SystemID OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.629.10.10.1.6.1.1.6
isisISAdjNbrExtendedCircID
The 4 byte Extended Circuit ID learned from the
Neighbor during 3-way handshake, or 0.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.6.1.1.7
isisISAdjUsage
How is the adjacency used? On a point-to-point link,
this might be level1and2, but on a LAN, the usage will
be level1 on the adjacency between peers at L1,
and level2 for the adjacency between peers at L2.
Enumeration
Enumerated Values:
0reserved
1level1
2level2
3level1and2
 .1.3.6.1.4.1.629.10.10.1.6.1.1.8
isisISAdjHoldTimer
The holding time in seconds for this adjacency.
This value is based on received IIH PDUs and
the elapsed time since receipt.
secondsUnsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.629.10.10.1.6.1.1.9
isisISAdjNeighPriority
Priority of the neighboring Intermediate System for
becoming the Designated Intermediate System.
ISPriority
Textual Convention: ISPriority Integer32
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.629.10.10.1.6.1.1.10
isisISAdjLastUpTime
If the isisISAdjState is in state 'up', the value
of sysUpTime when the adjacency most recently
entered the state 'up', or 0 if it has never
been in state 'up'.
secondsSNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.6.1.1.11
isisISAdjRestartCapable
Does the neighbor support restart signalling?

This object is set to 'true' if the peer includes the
restart TLV in IIH PDUs.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.6.1.1.12
isisISAdjPeerRestartState
Is the peer currently restarting?

Set to 'notRestarting' if the neighbor is not restarting
(is not including a restart TLV in the IIH, or is not setting the
RR bit).

Set to 'restartingNoHel…
Enumeration
Enumerated Values:
1notRestarting
2restartingNoHelp
3helpingRestart
 .1.3.6.1.4.1.629.10.10.1.6.1.1.13
isisISAdjSuppressed
Has the peer requested that the adjacency be suppressed?
If set to 'true', the adjacency will not be added to the
local LSP.

This object is set to 'true' if the peer sets the SA bit in
the restart TLV in …
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.6.1.1.14
isisISAdjNeighLanID
On a broadcast circuit, the LAN ID reported by the
neighbor for the Designated Intermediate System on this
circuit at this level. For a non-broadcast circuit, or if,
for any reason, the neighbor is not partaking in the…
OctetString
Constraints:
range: 0-7
 .1.3.6.1.4.1.629.10.10.1.6.1.1.15
isisISAdjNeighHostname
The hostname corresponding to isisISAdjNeighSysID.
This is the null string if isisSdEntMapHostnames is
'false' or if no hostname is known.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.629.10.10.1.6.1.1.16
isisISAdjNeighLanIDHostname
The hostname corresponding to the system ID part of the
isisISAdjNeighLanID object.

This is the null string if the isisISAdjNeighLanID object
is null, if isisSdEntMapHostnames is 'false', or if no
hostnam…
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.629.10.10.1.6.1.1.17

isisISAdjAreaAddrTable

table
.1.3.6.1.4.1.629.10.10.1.6.2 · 1 row entry · 2 columns
Open in standard view 
This table contains the set of Area Addresses of
neighboring Intermediate Systems as reported in received
IIH PDUs.
isisISAdjAreaAddrEntry entry .1.3.6.1.4.1.629.10.10.1.6.2.1
Each entry contains one Area Address reported by a
neighboring Intermediate System in its IIH PDUs.
Indexes
isisSysInstance isisCircIndex isisISAdjIndex isisISAdjAreaAddrIndex
Column Syntax OID
isisISAdjAreaAddrIndex
An index for the areas associated with one neighbor.
This provides a simple way to walk the table.
Integer32
Constraints:
range: 1-2000000000
 .1.3.6.1.4.1.629.10.10.1.6.2.1.1
isisISAdjAreaAddress
One Area Address as reported in IIH PDUs received from
the neighbor.
OSINSAddress
Textual Convention: OSINSAddress OctetString
Type Constraints:
range: 0..20
 .1.3.6.1.4.1.629.10.10.1.6.2.1.2

isisISAdjIPAddrTable

table
.1.3.6.1.4.1.629.10.10.1.6.3 · 1 row entry · 3 columns
Open in standard view 
This table contains the set of IP Addresses of
neighboring Intermediate Systems as reported in received
IIH PDUs.
          
If the isisSysRestrictLanAdjsToSubnet object in isisSysTable
is set to 'true' then for an IPv4 broadcast circuit, only
IP addresses on the same subnet as the local circuit are
included in this table.
isisISAdjIPAddrEntry entry .1.3.6.1.4.1.629.10.10.1.6.3.1
Each entry contains one IP Address reported by a
neighboring Intermediate System in its IIH PDUs.
Indexes
isisSysInstance isisCircIndex isisISAdjIndex isisISAdjIPAddrIndex
Column Syntax OID
isisISAdjIPAddrIndex
An index to this table which identifies the IP addresss
to which this entry belongs.
Integer32
Constraints:
range: 1-2000000000
 .1.3.6.1.4.1.629.10.10.1.6.3.1.1
isisISAdjIPAddrType
The type of one IP Address as reported in IIH PDUs
received from the neighbor.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.629.10.10.1.6.3.1.2
isisISAdjIPAddrAddress
One IP Address as reported in IIH PDUs received from the
neighbor.
OctetString
Constraints:
range: 16-16
range: 4-4
 .1.3.6.1.4.1.629.10.10.1.6.3.1.3

isisISAdjProtSuppTable

table
.1.3.6.1.4.1.629.10.10.1.6.4 · 1 row entry · 3 columns
Open in standard view 
This table contains the set of protocols supported by
neighboring Intermediate Systems as reported in received
IIH PDUs.
isisISAdjProtSuppEntry entry .1.3.6.1.4.1.629.10.10.1.6.4.1
Each entry contains one protocol supported by a
neighboring Intermediate System as reported in its IIH
PDUs.
Indexes
isisSysInstance isisCircIndex isisISAdjIndex isisISAdjProtSuppProtocol
Column Syntax OID
isisISAdjProtSuppProtocol
One supported protocol as reported in IIH PDUs received
from the neighbor.
SupportedProtocol
Textual Convention: SupportedProtocol Enumeration
Type Values:
129iso8473
142ipV6
204ip
 .1.3.6.1.4.1.629.10.10.1.6.4.1.1
isisISAdjProtSuppLocalSupport
Whether local configuration allows use of this protocol to
this neighbor.

The value 'false' indicates that the protocol is unusable.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.6.4.1.5
isisISAdjProtSuppBfdStatus
BFD session state for this protocol. The state
inactive(2) indicates that the protocol is unusable for
forwarding because a BFD session cannot be established or
has failed.
Enumeration
Enumerated Values:
0notRequired
1active
2inactive
3adminDown
4noContact
 .1.3.6.1.4.1.629.10.10.1.6.4.1.6

isisISAdjMtSupportedTable

table
.1.3.6.1.4.1.629.10.10.1.6.5 · 1 row entry · 2 columns
Open in standard view 
This table contains the set of topologies supported by
neighboring Intermediate Systems as reported in received IIH
PDUs.
isisISAdjMtSupportedEntry entry .1.3.6.1.4.1.629.10.10.1.6.5.1
Each entry contains one topology reported by a
neighboring Intermediate System in its IIH PDUs.
Indexes
isisSysInstance isisCircIndex isisISAdjIndex isisISAdjMtSuppMtId
Column Syntax OID
isisISAdjMtSuppMtId
A topology that is supported on this adjacency.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.629.10.10.1.6.5.1.4
isisISAdjMtSuppLocalSupport
Whether this topology is also supported locally on this
circuit.

The value is 'true' if there is a corresponding row in the
isisMtCircStatusTable with isisMtCircStatusOperState set
to 'operStatusUp'. In …
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.6.5.1.5

isisIPRATable

table
.1.3.6.1.4.1.629.10.10.1.8.1 · 1 row entry · 15 columns
Open in standard view 
The table of IP Reachable Addresses to networks,
subnetworks or hosts, learned automatically.
          
DC-ISIS does not support the manual addition of entries
using this table.  This table is read-only.
          
In order to specify reachable addresses manually,
configure a static route in the Address Family Manager,
and configure the AFM to pass the static route into
DC-ISIS.
          
In DC-RTM, this can be done using the static routes
table (rtmStaticRtTable), and the redistribution table
(rtmRedistTable).
isisIPRAEntry entry .1.3.6.1.4.1.629.10.10.1.8.1.1
Each entry defines an IP Reachable Address to a network,
subnetwork or host.

Each IP Reachable Address may have multiple entries in the
table, one for each equal cost path to the reachable address.
Indexes
isisSysInstance isisIPRADestType isisIPRADest isisIPRADestPrefixLen isisIPRANextHopIndex
Column Syntax OID
isisIPRADestType
The type of this IP Reachable Address.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.629.10.10.1.8.1.1.1
isisIPRADest
The destination of this IP Reachable Address. This is
either a network address, subnetwork address or host
address.
OctetString
Constraints:
range: 16-16
range: 4-4
 .1.3.6.1.4.1.629.10.10.1.8.1.1.2
isisIPRADestPrefixLen
The length of the IP Netmask for Reachability Address.
Unsigned32
Constraints:
range: 0-128
 .1.3.6.1.4.1.629.10.10.1.8.1.1.3
isisIPRANextHopIndex
Index of next hop. Used when there are multiple Equal
Cost Multipath alternatives for the same destination.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.629.10.10.1.8.1.1.4
isisIPRANextHopType
The type of the IP next hop address.

For the DC-ISIS implementation, this field is not stored
and is therefore not returned in GETs for this MIB.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.629.10.10.1.8.1.1.5
isisIPRANextHop
The IP next hop to this destination.

For the DC-ISIS implementation, this field is not stored
and is therefore not returned in GETs for this MIB.
OctetString
Constraints:
range: 16-16
range: 4-4
 .1.3.6.1.4.1.629.10.10.1.8.1.1.6
isisIPRAType
The type of this IP Reachable Address. Those of type
manual are created by the network manager. Those of type
automatic are created through propagation of routing
information from another routing protocol.
…
Enumeration
Enumerated Values:
1manual
2automatic
3both
 .1.3.6.1.4.1.629.10.10.1.8.1.1.7
isisIPRAExistState
The state of this IP Reachable Address. This object
follows the ExistenceState behavior.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.629.10.10.1.8.1.1.8
isisIPRAAdminState
The administrative state of the IP Reachable Address. This
object follows the AdminState behavior.
AdminState
Textual Convention: AdminState Enumeration
Type Values:
1on
2off
 .1.3.6.1.4.1.629.10.10.1.8.1.1.9
isisIPRAMetric
The metric value for reaching the specified
destination over this circuit.
DefaultMetric
Textual Convention: DefaultMetric Integer32
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.629.10.10.1.8.1.1.10
isisIPRAMetricType
Indicates whether the metric is internal or
external.
MetricType
Textual Convention: MetricType Enumeration
Type Values:
1internal
2external
 .1.3.6.1.4.1.629.10.10.1.8.1.1.11
isisIPRAFullMetric
The wide metric value for reaching the specified
destination over this circuit.
FullMetric
Textual Convention: FullMetric Unsigned32
 .1.3.6.1.4.1.629.10.10.1.8.1.1.12
isisIPRASNPAAddress
The SNPA Address to which a PDU may be forwarded in
order to reach a destination which matches this IP
Reachable Address. DC-ISIS does not support this field.
OSINSAddress
Textual Convention: OSINSAddress OctetString
Type Constraints:
range: 0..20
 .1.3.6.1.4.1.629.10.10.1.8.1.1.13
isisIPRASourceType
The origin of this route.
Enumeration
Enumerated Values:
1static
2direct
3ospfv2
4ospfv3
5isis
6rip
7igrp
8eigrp
9bgp
10other
 .1.3.6.1.4.1.629.10.10.1.8.1.1.14
isisIPRAMtId
The topology that this reachable address is in.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.629.10.10.1.8.1.1.16

isisLSPSummaryTable

table
.1.3.6.1.4.1.629.10.10.1.9.1 · 1 row entry · 9 columns
Open in standard view 
The table of LSP Headers.
isisLSPSummaryEntry entry .1.3.6.1.4.1.629.10.10.1.9.1.1
Each entry provides a summary describing an
LSP currently stored in the system.
Indexes
isisSysInstance isisLSPLevel isisLSPID
Column Syntax OID
isisLSPLevel
At which level does this LSP appear?
ISLevel
Textual Convention: ISLevel Enumeration
Type Values:
0none
1area
2domain
 .1.3.6.1.4.1.629.10.10.1.9.1.1.1
isisLSPID
The 8 byte LSP ID, consisting of the SystemID,
Circuit ID, and Fragment Number.
LinkStatePDUID
Textual Convention: LinkStatePDUID OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.629.10.10.1.9.1.1.2
isisLSPSeq
The sequence number for this LSP.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.9.1.1.3
isisLSPZeroLife
Is this LSP being purged by this System?
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.9.1.1.4
isisLSPChecksum
The 16 bit Fletcher Checksum.
Unsigned16TC
Textual Convention: Unsigned16TC Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.629.10.10.1.9.1.1.5
isisLSPLifetimeRemain
The remaining lifetime in seconds for this LSP.

For a current LSP (isisLSPZeroLife is 'false'), this
indicates the time remaining before the LSP will expire.
For an LSP being purged from the system (isisL…
secondsUnsigned16TC
Textual Convention: Unsigned16TC Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.629.10.10.1.9.1.1.6
isisLSPPDULength
The length of this LSP.
Unsigned16TC
Textual Convention: Unsigned16TC Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.629.10.10.1.9.1.1.7
isisLSPAttributes
Flags carried by the LSP.
Unsigned8TC
Textual Convention: Unsigned8TC Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.629.10.10.1.9.1.1.8
isisLSPIDHostname
The hostname corresponding to the system ID part of the
isisLSPID object.

This is the null string if no hostname is known.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.629.10.10.1.9.1.1.9

isisLSPTLVTable

table
.1.3.6.1.4.1.629.10.10.1.9.2 · 1 row entry · 7 columns
Open in standard view 
The contents of each LSP.
isisLSPTLVEntry entry .1.3.6.1.4.1.629.10.10.1.9.2.1
Each entry describes an LSP current stored in the
system.
Indexes
isisSysInstance isisLSPLevel isisLSPID isisLSPTLVIndex
Column Syntax OID
isisLSPTLVIndex
The index of this TLV in the LSP. The first TLV has index 1
and the Nth TLV has an index of N.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.9.2.1.1
isisLSPTLVSeq
The sequence number for this LSP.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.9.2.1.2
isisLSPTLVChecksum
The 16 bit Fletcher Checksum.
Unsigned16TC
Textual Convention: Unsigned16TC Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.629.10.10.1.9.2.1.3
isisLSPTLVType
The type of this TLV.
Unsigned8TC
Textual Convention: Unsigned8TC Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.629.10.10.1.9.2.1.4
isisLSPTLVLen
The length of this TLV.
Unsigned8TC
Textual Convention: Unsigned8TC Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.629.10.10.1.9.2.1.5
isisLSPTLVValue
The value of this TLV.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.629.10.10.1.9.2.1.6
isisLSPTLVHostname
The hostname corresponding to the system ID part of the
isisLSPID object.

This is the null string if no hostname is known.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.629.10.10.1.9.2.1.7

isisPmSjTable

table
.1.3.6.1.4.1.629.10.10.1.11.1 · 1 row entry · 3 columns
Open in standard view 
This table contains information on joins on which the Protocol
Manager acts as a slave.  Each row in this table represents
one slave join in the Protocol Manager.
isisPmSjEntry entry .1.3.6.1.4.1.629.10.10.1.11.1.1
Represents a join for which the Protocol Manager is slave.
Indexes
isisSysInstance isisPmSjInterface isisPmSjMasterEntity
Column Syntax OID
isisPmSjInterface
Identifies the interface provided on this slave join.
IsisPmInterfaceId
Textual Convention: IsisPmInterfaceId Enumeration
Type Values:
1ifInterfaceInfo
2ifRtProtoInput
3ifCSPF
4ifSDC
 .1.3.6.1.4.1.629.10.10.1.11.1.1.1
isisPmSjMasterEntity
Index which uniquely identifies the master entity among other
entities of the same component within this instance of
DC-ISIS.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.11.1.1.2
isisPmSjJoinStatus
The status of the slave join.
IsisSjStatus
Textual Convention: IsisSjStatus Enumeration
Type Values:
1sjNotJoined
2sjJoined
3sjJoinActive
4sjJoinUnreg
5sjJoinGone
6sjFailingOver
7sjFailed
 .1.3.6.1.4.1.629.10.10.1.11.1.1.3

isisPmMjTable

table
.1.3.6.1.4.1.629.10.10.1.11.2 · 1 row entry · 9 columns
Open in standard view 
This table controls which entities the Protocol Manager should join
to as master.  Each join is represented by a row in this table.  The
status of each join is represented by a read-only object within each
row.
Only routing protocol joins may be configured in this MIB.  Rows in this
table for other join types are read only.
isisPmMjEntry entry .1.3.6.1.4.1.629.10.10.1.11.2.1
Represents a join for which the Protocol Manager is master.
Indexes
isisSysInstance isisPmMjInterface isisPmMjSlaveEntity isisPmMjAddrType isisPmMjMtId
Column Syntax OID
isisPmMjInterface
Identifies the interface required of this master join.

This object follows the index behavior.
IsisPmInterfaceId
Textual Convention: IsisPmInterfaceId Enumeration
Type Values:
1ifInterfaceInfo
2ifRtProtoInput
3ifCSPF
4ifSDC
 .1.3.6.1.4.1.629.10.10.1.11.2.1.1
isisPmMjSlaveEntity
Identifies the slave entity to join with. This index is used in the
join user data, to enable FTI-specific code within System Manager to
select a suitable slave entity.

This object follows the index beha…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.11.2.1.2
isisPmMjAddrType
Identifies the slave entity to join with. This is used along with the
isisPmMjSlaveEntity (with address subtype 'none') in the join user data
on an RPI join, to enable FTI-specific code within System Manager to
select …
IsisAddrType
Textual Convention: IsisAddrType Enumeration
Type Values:
0none
1ipv4
2ipv6
3nsap
4ipx
 .1.3.6.1.4.1.629.10.10.1.11.2.1.3
isisPmMjRowStatus
The row status for this master join, used to create and destroy table
entries.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.629.10.10.1.11.2.1.4
isisPmMjAdminStatus
The administrative status of this master join, used to start and stop
the join.
IsisAdminStatusr/w
Textual Convention: IsisAdminStatus Enumeration
Type Values:
1adminStatusUp
2adminStatusDown
 .1.3.6.1.4.1.629.10.10.1.11.2.1.5
isisPmMjOperStatus
The current operational status of this master join.
IsisOperStatus
Textual Convention: IsisOperStatus Enumeration
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
 .1.3.6.1.4.1.629.10.10.1.11.2.1.6
isisPmMjJoinStatus
The status of the master join.
IsisMjStatus
Textual Convention: IsisMjStatus Enumeration
Type Values:
1mjNotJoined
2mjSentAddJoin
3mjSentRegister
4mjJoinActive
5mjSentDelJoin
6mjSentUnregister
7mjJoinGone
8mjFailedToRegister
9mjFailingOver
10mjFailed
 .1.3.6.1.4.1.629.10.10.1.11.2.1.7
isisPmMjMtId
The topology that this join is for. Note that this only
applies to RPI joins.

If multi-topology IS-IS is not supported then this field
should be set to zero.

This object follows the index …
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.629.10.10.1.11.2.1.9
isisPmMjSubAddrFamily
Identifies the sub address family this join is for. Note
that this only applies to RPI joins.

The value is ignored if isisPmMjInterface is not
ifRtProtoInput.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.629.10.10.1.11.2.1.10

isisIgpShortcutTable

table
.1.3.6.1.4.1.629.10.10.1.11.3 · 1 row entry · 7 columns
Open in standard view 
The table of IGP shortcut tunnel interfaces known to DC-ISIS.
isisIgpShortcutEntry entry .1.3.6.1.4.1.629.10.10.1.11.3.1
Each entry corresponds to one IGP shortcut tunnel interface
known to DC-ISIS on this system.
Indexes
isisSysInstance isisShortcutIfIndex
Column Syntax OID
isisShortcutIfIndex
The value of ifIndex for the IGP shortcut tunnel interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.629.10.10.1.11.3.1.1
isisShortcutRemoteAddressType
The Type of IP address for this remote address.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.629.10.10.1.11.3.1.2
isisShortcutRemoteAddress
The IP Address value for this remote address.
OctetString
Constraints:
range: 16-16
range: 4-4
 .1.3.6.1.4.1.629.10.10.1.11.3.1.3
isisShortcutMetricType
The type of metric value assigned to this IGP shortcut.

The type of metric value can be one of the following.
- 'metricTypeAbsolute'; the metric defined by
isisShortcutMetricValue is used as the cost …
DC-MASTER-TCIgpShortcutMetricType
Textual Convention: DC-MASTER-TCIgpShortcutMetricType Enumeration
Type Values:
1metricTypeAbsolute
2metricTypeRelative
 .1.3.6.1.4.1.629.10.10.1.11.3.1.4
isisShortcutMetricValue
The metric assigned to this IGP shortcut.

If isisShortcutMetricType is set to 'metricTypeAbsolute'
then this field takes a value in the range of 1 -
16777215.

If isisShortcutMetricType is s…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.10.10.1.11.3.1.5
isisShortcutOperStatus
The operational status of the IGP shortcut interface.

The IGP shortcut interface is only usable by DC-ISIS if
isisShortcutOperStatus is set to 'up'.
DC-MASTER-TCIfOperStatus
Textual Convention: DC-MASTER-TCIfOperStatus Enumeration
Type Values:
1up
2down
3testing
4unknown
5dormant
6notPresent
7lowerLayerDown
 .1.3.6.1.4.1.629.10.10.1.11.3.1.6
isisShortcutPendingDeletion
If 'true' then the IGP shortcut interface has been deleted
but has not yet been removed from DC-ISIS because it might
still be in use as a TE-tunnel next hop.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.11.3.1.7

isisSdEntTable

table
.1.3.6.1.4.1.629.10.10.1.12.1 · 1 row entry · 8 columns
Open in standard view 
Each entry in this table represents an SDC entity.
isisSdEntEntry entry .1.3.6.1.4.1.629.10.10.1.12.1.1
Each entry represents an SDC entity.
Indexes
isisSdEntIndex
Column Syntax OID
isisSdEntIndex
Non-zero index which identifies an SDC entity.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.629.10.10.1.12.1.1.1
isisSdEntRowStatus
The row status for this SDC Entity Table entry, used to create and
destroy table entries.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.629.10.10.1.12.1.1.2
isisSdEntAdminStatus
The administrative status of this SDC entity, used to activate and
deactivate SDC.
IsisAdminStatusr/w
Textual Convention: IsisAdminStatus Enumeration
Type Values:
1adminStatusUp
2adminStatusDown
 .1.3.6.1.4.1.629.10.10.1.12.1.1.3
isisSdEntOperStatus
The current operational status of this SDC entity.
IsisOperStatus
Textual Convention: IsisOperStatus Enumeration
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
 .1.3.6.1.4.1.629.10.10.1.12.1.1.4
isisSdEntMapHostnames
Should SDC map system IDs to hostnames?

If 'true', SDC will fill in the isisISAdjNeighHostname and
isisISAdjNeighLanIDHostname objects (if a hostname is
known), and will map system IDs to hostnames in PD …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.12.1.1.5
isisSdEntAuthSNPs
Should SDC authenticate SNP packets?

If 'false', SDC will not check the authentication on SNP
packets. If 'true' then it will.

Setting this field is sometimes required for
interoperability…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.12.1.1.6
isisSdEntBfdProviderIndex
The entity index for the Bidirectional Forwarding Detection
(BFD) provider to which this SDC entity should join. Zero
indicates that no BFD provider is available, or that SDC should
not join to any BFD provider.
…
DC-MASTER-TCEntityIndexOrZeror/w
Textual Convention: DC-MASTER-TCEntityIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.629.10.10.1.12.1.1.7
isisSdEntStopAdjDuplIDs
Flag indicating whether this SDC should prevent an
adjacency forming to a neighbor with the same System ID
but a different SNPA address as an existing neighbor over
the same circuit and level.

This field …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.629.10.10.1.12.1.1.8

isisSdMjTable

table
.1.3.6.1.4.1.629.10.10.1.12.2 · 1 row entry · 7 columns
Open in standard view 
This table controls which entities an SDC entity should join to as
master.  Each join is represented by a row in this table.  The status
of each join is represented by a read-only object within each row.
isisSdMjEntry entry .1.3.6.1.4.1.629.10.10.1.12.2.1
Represents a join for which this SDC entity is master.
Indexes
isisSdEntIndex isisSdMjInterface
Column Syntax OID
isisSdMjInterface
Identifies the interface required of this master join. Since an SDC
only has a single join on any of its interfaces, this serves with the
SDC entity index in uniquely identifying the join.

This field fol…
IsisSdInterfaceId
Textual Convention: IsisSdInterfaceId Enumeration
Type Values:
1ifDataLink
2ifSubnetDependent
3ifBidirectionalForwarding
 .1.3.6.1.4.1.629.10.10.1.12.2.1.1
isisSdMjRowStatus
The row status for this master join, used to create and destroy table
entries.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.629.10.10.1.12.2.1.2
isisSdMjAdminStatus
The administrative status of this master join, used to start and stop
the join.
IsisAdminStatusr/w
Textual Convention: IsisAdminStatus Enumeration
Type Values:
1adminStatusUp
2adminStatusDown
 .1.3.6.1.4.1.629.10.10.1.12.2.1.3
isisSdMjOperStatus
The current operational status of this master join.
IsisOperStatus
Textual Convention: IsisOperStatus Enumeration
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
 .1.3.6.1.4.1.629.10.10.1.12.2.1.4
isisSdMjEntityIndex
Identifies the slave entity to join with. This index (possibly along
with isisSdMjEntityType - see below) is used in the join user data, to
enable FTI-specific code within System Manager to select a suitable
slave enti…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.10.1.12.2.1.5
isisSdMjEntityType
If isisSdMjInterface is ifSubnetDependent, this field indicates the
type of entity to join with. This index along with isisSdMjEntityType
is used in the join user data to enable FTI-specific code within System
Manager …
IsisSdEntityTyper/w
Textual Convention: IsisSdEntityType Enumeration
Type Values:
1ifProtocolManager
2ifPDUInjectionTool
 .1.3.6.1.4.1.629.10.10.1.12.2.1.6
isisSdMjJoinStatus
The status of the master join.
IsisMjStatus
Textual Convention: IsisMjStatus Enumeration
Type Values:
1mjNotJoined
2mjSentAddJoin
3mjSentRegister
4mjJoinActive
5mjSentDelJoin
6mjSentUnregister
7mjJoinGone
8mjFailedToRegister
9mjFailingOver
10mjFailed
 .1.3.6.1.4.1.629.10.10.1.12.2.1.7