isisSysMaxExternalRoutesAction
DC-ISIS-MIB ·
.1.3.6.1.4.1.629.10.10.1.1.1.1.36
Object
column
r/w
Enumeration
The action that DC-ISIS will take when the number of
external routes exceeds isisSysMaxExternalRoutes.
If set to 'log', DC-ISIS will alert the administrator by
logging that the limit has been exceeded.
If set to 'suppressExternal', DC-ISIS will remove all
external routes from the local LSP (at all active levels)
in addition to logging the problem.
In both cases, the administrator is responsible for
correcting the configuration in each Address Family Manager
(for example, DC-RTM), to reduce the number of redistributed
external routes.
In the 'suppressExternal' case, the Address Family Manager
is responsible for resynchronizing the set of routes with
DC-ISIS.
Context
- MIB
- DC-ISIS-MIB
- OID
.1.3.6.1.4.1.629.10.10.1.1.1.1.36- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- isisSysEntry
- Table
- isisSysTable
- Siblings
- 52
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | log |
2 | suppressExternal |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| isisSysInstance The unique identifier of the Integrated IS-IS
instance to which this row corresponds.
This object follows the index behavior. | column | Integer32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.1 |
| isisSysL2toL1Leaking If true, allow the router to leak L2 routes into L1. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.10.1.1.1.1.10 |
| isisSysMaxAge Value to place in RemainingLifeTime field of
the LSPs we generate.
This should be at least 300 seconds greater than
isisSysMaxLSPGenInt. | column | seconds Unsigned32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.11 |
| isisSysReceiveLSPBufferSize Size of the largest Buffer we are designed or
configured to store. This should be at least
as big as the maximum isisSysOrigLSPBuffSize
supported by the system.
If… | column | bytes Unsigned32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.12 |
| isisSysExistState The state of the IS-IS router. Turning this to
state 'destroy' forces the router to forget all
the current configuration. Setting the state to
'notInService' stops protocol proc… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.629.10.10.1.1.1.1.13 |
| isisSysOperStatus The current operational status of this instance of the
Protocol Manager component of DC-ISIS.
Note that DC-ISIS can only activate if there is at least
one active en… | column | IsisOperStatus | .1.3.6.1.4.1.629.10.10.1.1.1.1.14 |
| isisSysAllowAutoI3Config If 'true' then add IP addresses received from the I3 stub
to the isisCircIPAddrTable with admin state 'on'. If
'false' then add them with admin state 'off'. This field
follows t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.10.1.1.1.1.15 |
| isisSysCalcMaxDelay The maximum delay before the Routing Table is
recalculated following a change to the Link State
Database. (Recalculation is delayed to reduce the
frequency of recalculations of t… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.16 |
| isisSysCalcThrshUpdStart This parameter can be used to override the routing
calculation delay indicated by the isisSysCalcMaxDelay
parameter when the number of updates to the Link State
Database reaches a… | column | Unsigned32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.17 |
| isisSysCalcThrshUpdRestart This parameter can be used to interrupt a full routing
calculation when the number of pending updates to the Link
State Database has reached a threshold value.
This… | column | Unsigned32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.18 |
| isisSysCalcThrshRestartLimit This parameter limits the number of consecutive times a
routing calculation can be interrupted by new updates.
This guarantees that the routing calculation will actually
complete.… | column | Unsigned32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.19 |
| isisSysVersion The version number of the IS-IS protocol that
is implemented. | column | Enumeration | .1.3.6.1.4.1.629.10.10.1.1.1.1.2 |
| isisSysCalcPauseFreq This value determines how regularly a Routing Calculation
is paused. It is measured in points. The points scale
roughly maps to a time scale, so that the larger this value
is, t… | column | Unsigned32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.20 |
| isisSysCheckChecksums This value determines how often the checksums of LSPs in
the Link State Database are checked. If 0, no checksums
in the database are checked. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.21 |
| isisSysZeroAgeLifetime This is the minimum amount of time in seconds for which the
header of an expired LSP shall be retained after it has
been flooded with zero Remaining Lifetime. All that is
require… | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.22 |
| isisSysNumUpdPending The number of updates that are pending addition to the Link
State Database. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.23 |
| isisSysNumUpdMerged The number of updates that have been merged into the Link
State Database since the last routing calculation. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.24 |
| isisSysNumCksumsPending The number of LSPs in the Link State Database which are now
due to have their checksum checked. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.25 |
| isisSysTEMetricPcntge The Traffic Engineering metric is updated in real-time by
the I3 Stub. In order to increase performance and reduce
network traffic, this parameter determines the minimal
percenta… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.26 |
| isisSysMaxBwidthPcntge The maximum bandwidth on an interface is updated in
real-time by the I3 Stub. In order to increase performance
and reduce network traffic, this parameter determines the
minimal p… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.27 |
| isisSysMaxResBwidthPcntge The maximum reservable bandwidth on an interface is updated
in real-time by the I3 Stub. In order to increase
performance and reduce network traffic, this parameter
determines th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.28 |
| isisSysUnresBwidthPcntge The unreserved bandwidth on an interface is updated in
real-time by the I3 Stub. In order to increase performance
and reduce network traffic, this parameter determines the
minima… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.29 |
| isisSysType At which levels is the Intermediate System
running? This object follows the
replaceOnlyWhileDisabled behavior. | column | Enumeration | .1.3.6.1.4.1.629.10.10.1.1.1.1.3 |
| isisSysMaxLSPBwidthPcntge The maximum LSP bandwidth for the various switching
descriptors on an interface is updated in real-time by the
I3 Stub. In order to increase performance and reduce
network traffi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.30 |
| isisSysMinLSPBwidthPcntge The minimum LSP bandwidth for the various switching
descriptors on an interface is updated in real-time by the
I3 Stub. In order to increase performance and reduce
network traffi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.31 |
| isisSysMTUSizePcntge The Maximum Transmission Unit size for the various
switching descriptors on an interface is updated in
real-time by the I3 Stub. In order to increase performance
and reduce netwo… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.32 |
| isisSysTERouterID The Local IPv4 TE Router ID. This is a single stable IPv4
address that can always be referenced in a path that will
be reachable from multiple hops away, regardless of the
state … | column | OctetString | .1.3.6.1.4.1.629.10.10.1.1.1.1.33 |
| isisSysIPv6TERouterID The Local IPv6 TE Router ID. This is a single stable IPv6
global address that can always be referenced in a path that
will be reachable from multiple hops away, regardless of
the… | column | OctetString | .1.3.6.1.4.1.629.10.10.1.1.1.1.34 |
| isisSysMaxExternalRoutes The maximum number of static routes and routes
redistributed from other protocols that DC-ISIS will
accept.
The action that DC-ISIS will take when the maximum is
ex… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.35 |
| isisSysLspFullSuppress The set of routes (if any) that will be removed from the
local LSP by DC-ISIS when the local LSP becomes full at
either level.
When set to 'external', all static ro… | column | Enumeration | .1.3.6.1.4.1.629.10.10.1.1.1.1.37 |
| isisSysLspFullSetDBOL If set to 'true', DC-ISIS will set the database overload
flag in the local LSP (at all active levels) when the local
LSP becomes full (at either level).
The adminis… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.10.1.1.1.1.38 |
| isisSysRestartHelpPeer Indicates whether DC-ISIS implements the procedures defined
in the IS-IS restart RFC (3847) for helping a peer to restart.
Note that this object has no effect on th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.10.1.1.1.1.39 |
| isisSysID The ID for this instance of the Integrated IS-IS
protocol. This value is appended to each of the
area addresses to form the Network Entity Titles.
The derivation of a value for t… | column | SystemID | .1.3.6.1.4.1.629.10.10.1.1.1.1.4 |
| isisSysRestartActivationType This object is only used when DC-ISIS is manually activated
or deactivated (in other words, enters or leaves the state
with row status 'active' and admin status 'on'), and
indicat… | column | IsisSysRestartType | .1.3.6.1.4.1.629.10.10.1.1.1.1.40 |
| isisSysRestartAutoResetType There are cases where the IS-IS protocol requires the local
node to automatically deactivate and later reactivate.
This object indicates which restart procedures (if any) are
foll… | column | IsisSysRestartType | .1.3.6.1.4.1.629.10.10.1.1.1.1.41 |
| isisSysRestartAdjacencyWait This object is only used when DC-ISIS activates with
the activation type (isisSysRestartActivationType or
isisSysRestartAutoResetType) set to 'start' or 'restart'.
… | column | seconds Integer32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.42 |
| isisSysMaxRecoveryTime This object is only used when DC-ISIS activates with
the activation type (isisSysRestartActivationType or
isisSysRestartAutoResetType) set to 'restart'.
It defines … | column | seconds Integer32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.43 |
| isisSysClearStats Set to 'true' to clear all system statistics, including the
isisSystemCounter and isisPacketCounter tables.
Note that isisSysStatsLSPCount is not reset by this obje… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.10.1.1.1.1.44 |
| isisSysSetAttached If DC-ISIS is operating at both level 1 and level 2, this
field indicates how DC-ISIS should decide whether to set the
attached bit in its level 1 LSP.
- 'attachNo… | column | Enumeration | .1.3.6.1.4.1.629.10.10.1.1.1.1.45 |
| isisSysProtSupported This attribute contains the set of protocols supported by
this Intermediate System. | column | IsisAddrTypeBits | .1.3.6.1.4.1.629.10.10.1.1.1.1.46 |
| isisSysRestrictLanAdjsToSubnet This object only affects IPv4 broadcast circuits. If this
is set to 'true', DC-ISIS will only form adjacencies with
intermediate systems that are on the same subnet as the
local … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.10.1.1.1.1.47 |
| isisSysHostName The string that this instance of IS-IS will use as the
local hostname.
This is advertised to other Intermediate Systems in the
Dynamic Hostname TLV. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.629.10.10.1.1.1.1.48 |
| isisSysCalcSoonAfterCircChange Set this object to 'true' to minimize the delay before
triggering a routing calculation that includes any
relevant circuit change. This means a change to the local
neighbors (inc… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.10.1.1.1.1.49 |
| isisSysMaxPathSplits Maximum number of paths with equal routing metric value
which it is permitted to split between.
Note that, when IGP shortcut interfaces are in use, this
maximum app… | column | Integer32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.5 |
| isisSysSendNotifications This attribute contains the set of notifications generated
by this Intermediate System.
The notifications that may be enabled are the
isisCircIndTable, isisDatabase… | column | Bits | .1.3.6.1.4.1.629.10.10.1.1.1.1.50 |
| isisSysEnableIgpShortcut Set isisSysEnableIgpShortcut to 'true' to enable IS-IS
routing over IGP shortcut interfaces.
Set isisSysEnableIgpShortcut to 'false' to disable IS-IS
routing over I… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.10.1.1.1.1.51 |
| isisSysI3EntityIndex Identifies the I3 stub instance to which this
IS-IS instance should join.
The status of the join is given by the row in the
isisPmMjTable with isisPmMjInterface equ… | column | DC-MASTER-TCNumericIndex | .1.3.6.1.4.1.629.10.10.1.1.1.1.52 |
| isisSysRtmPurgeTime This object defines the maximum time that DC-ISIS will
wait when a Routing Table Manager (such as DC-RTM) fails
before purging routes.
In some systems, the Routing … | column | seconds Integer32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.53 |
| isisSysMaxLSPGenInt Maximum interval, in seconds, between generated LSPs
by this instance of the protocol. This object follows
the resettingTimer behavior. The value must be
greater than any value c… | column | seconds Integer32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.6 |
| isisSysPollESHelloRate The value, in seconds, to be used for the suggested ES
configuration timer in ISH PDUs when soliciting the ES
configuration. | column | seconds Unsigned32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.7 |
| isisSysWaitTime Number of seconds to delay in waiting state before
entering on state. This object follows the resettingTimer
behavior. | column | seconds Unsigned32 | .1.3.6.1.4.1.629.10.10.1.1.1.1.8 |
| isisSysAdminState The administrative state of this instance of the
Integrated IS-IS protocol. Setting this object to the
value 'on' when its current value is 'off' enables operation
of this instan… | column | AdminState | .1.3.6.1.4.1.629.10.10.1.1.1.1.9 |