isisSysLevelTEEnabled
DC-ISIS-MIB ·
.1.3.6.1.4.1.629.10.10.1.2.1.1.9
Object
Do we do Traffic Engineering for IPv4 at this level?
If Traffic Engineering is enabled, isisSysLevelMetricStyle
must be set to 'wide' or 'both' for this level, and a value
must be configured for isisSysTERouterID.
When Traffic Engineering is enabled for IPv4, this IS will
advertise the IPv4 TE router ID in the local LSP, and will
advertise traffic engineering parameters (where available)
for links configured to support IPv4.
This object is ignored if the 'ipv4' bit is not set in the
value of isisSysProtSupported.
Context
- MIB
- DC-ISIS-MIB
- OID
.1.3.6.1.4.1.629.10.10.1.2.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- isisSysLevelEntry
- Table
- isisSysLevelTable
- Siblings
- 11
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| isisSysLevelIndex The level that this entry describes. | column | Enumeration | .1.3.6.1.4.1.629.10.10.1.2.1.1.1 |
| isisSysLevelIPv6TEEnabled Do we do Traffic Engineering for IPv6 at this level?
DC-ISIS only supports Traffic Engineering for IPv6 at
level 1.
If Traffic Engineering is enabled… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.10.1.2.1.1.10 |
| isisSysLevelRestartT2Duration This object is only used when DC-ISIS activates with
the activation type (isisSysRestartActivationType or
isisSysRestartAutoResetType) set to 'start' or 'restart'.
… | column | seconds Integer32 | .1.3.6.1.4.1.629.10.10.1.2.1.1.11 |
| isisSysLevelAuthUser Authentication user data for area/domain level
authentication.
This data is passed opaquely to the Metaswitch authentication
interface where it can be used to assis… | column | DC-MASTER-TCAuthUserDataString | .1.3.6.1.4.1.629.10.10.1.2.1.1.12 |
| isisSysLevelOrigLSPBuffSize The maximum size of LSPs and SNPs originated by
this Intermediate System at this level.
This object follows the replaceOnlyWhileDisabled
behavior. | column | LSPBuffSize | .1.3.6.1.4.1.629.10.10.1.2.1.1.2 |
| isisSysLevelMinLSPGenInt Minimum interval, in milliseconds, between successive
generation of LSPs with the same LSPID at this level
by this instance of the protocol. This object
follows the resettingTime… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.629.10.10.1.2.1.1.3 |
| isisSysLevelOverloadState The Overload state of the database at this level.
The value 'overloaded' indicates a database that is
low on an essential resource, such as memory.
The administrator may indirectl… | column | LevelState | .1.3.6.1.4.1.629.10.10.1.2.1.1.4 |
| isisSysLevelSetOverload Administratively set the overload bit for the level.
The overload bit will continue to be set if the
implementation runs out of memory, independent of
this variable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.10.1.2.1.1.5 |
| isisSysLevelSetOverloadUntil If set, the overload bit should be set, and cleared
after sysUpTime exceeds this value. | column | seconds SNMPv2-SMITimeTicks | .1.3.6.1.4.1.629.10.10.1.2.1.1.6 |
| isisSysLevelMetricStyle Which style of Metric do we generate in our LSPs
at this level? | column | MetricStyle | .1.3.6.1.4.1.629.10.10.1.2.1.1.7 |
| isisSysLevelSPFConsiders Which style of Metric do we consider in our SPF
computation at this level? | column | MetricStyle | .1.3.6.1.4.1.629.10.10.1.2.1.1.8 |