isisSysLevelMetricStyle
DC-ISIS-MIB ·
.1.3.6.1.4.1.629.10.10.1.2.1.1.7
Object
column
r/w
MetricStyle
Which style of Metric do we generate in our LSPs at this level?
Context
- MIB
- DC-ISIS-MIB
- OID
.1.3.6.1.4.1.629.10.10.1.2.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- isisSysLevelEntry
- Table
- isisSysLevelTable
- Siblings
- 11
Syntax
MetricStyle
- Source
- MetricStyle
- Base type
Enumeration
Values & Constraints
Type Values
1 | narrow |
2 | wide |
3 | both |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| isisSysLevelIndex The level that this entry describes. | column | Enumeration | .1.3.6.1.4.1.629.10.10.1.2.1.1.1 |
| isisSysLevelIPv6TEEnabled Do we do Traffic Engineering for IPv6 at this level?
DC-ISIS only supports Traffic Engineering for IPv6 at
level 1.
If Traffic Engineering is enabled… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.10.1.2.1.1.10 |
| isisSysLevelRestartT2Duration This object is only used when DC-ISIS activates with
the activation type (isisSysRestartActivationType or
isisSysRestartAutoResetType) set to 'start' or 'restart'.
… | column | seconds Integer32 | .1.3.6.1.4.1.629.10.10.1.2.1.1.11 |
| isisSysLevelAuthUser Authentication user data for area/domain level
authentication.
This data is passed opaquely to the Metaswitch authentication
interface where it can be used to assis… | column | DC-MASTER-TCAuthUserDataString | .1.3.6.1.4.1.629.10.10.1.2.1.1.12 |
| isisSysLevelOrigLSPBuffSize The maximum size of LSPs and SNPs originated by
this Intermediate System at this level.
This object follows the replaceOnlyWhileDisabled
behavior. | column | LSPBuffSize | .1.3.6.1.4.1.629.10.10.1.2.1.1.2 |
| isisSysLevelMinLSPGenInt Minimum interval, in milliseconds, between successive
generation of LSPs with the same LSPID at this level
by this instance of the protocol. This object
follows the resettingTime… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.629.10.10.1.2.1.1.3 |
| isisSysLevelOverloadState The Overload state of the database at this level.
The value 'overloaded' indicates a database that is
low on an essential resource, such as memory.
The administrator may indirectl… | column | LevelState | .1.3.6.1.4.1.629.10.10.1.2.1.1.4 |
| isisSysLevelSetOverload Administratively set the overload bit for the level.
The overload bit will continue to be set if the
implementation runs out of memory, independent of
this variable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.10.1.2.1.1.5 |
| isisSysLevelSetOverloadUntil If set, the overload bit should be set, and cleared
after sysUpTime exceeds this value. | column | seconds SNMPv2-SMITimeTicks | .1.3.6.1.4.1.629.10.10.1.2.1.1.6 |
| isisSysLevelSPFConsiders Which style of Metric do we consider in our SPF
computation at this level? | column | MetricStyle | .1.3.6.1.4.1.629.10.10.1.2.1.1.8 |
| isisSysLevelTEEnabled Do we do Traffic Engineering for IPv4 at this level?
If Traffic Engineering is enabled, isisSysLevelMetricStyle
must be set to 'wide' or 'both' for this level, and … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.629.10.10.1.2.1.1.9 |