CISCO-IF-EXTENSION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
9
Rows
9
Columns
58
.1.3.6.1.4.1.9.9.276.1.1.1 · 1 row entry · 12 columns
This  table contains interface packet
statistics which are not available in 
IF-MIB(RFC2863). 
          
As an example, some interfaces to which
objects in this table are applicable are
as follows :
          
        o Ethernet
        o FastEthernet
        o ATM
        o BRI
        o Sonet
        o GigabitEthernet
          
Some objects defined in this table may be 
applicable to physical interfaces only.
As a result, this table may be sparse for
some logical interfaces.
cieIfPacketStatsEntry entry .1.3.6.1.4.1.9.9.276.1.1.1.1
An entry into the cieIfPacketStatsTable.
Indexes
IF-MIBifIndex
Column Syntax OID
cieIfLastInTime
This object represents the elapsed time in
milliseconds since last protocol input
packet was received.

Discontinuities in the value of this variable
can occur at re-initialization of the
management syste…
millisecondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.276.1.1.1.1.1
cieIfLastOutTime
This object represents the elapsed time in
milliseconds since last protocol output
packet was transmitted.

Discontinuities in the value of this variable
can occur at re-initialization of the
management …
millisecondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.276.1.1.1.1.2
cieIfLastOutHangTime
This object represents the elapsed time in
milliseconds since last protocol output
packet could not be successfully transmitted.

Discontinuities in the value of this variable
can occur at re-initializa…
millisecondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.276.1.1.1.1.3
cieIfInRuntsErrs
The number of packets input on a particular
physical interface which were dropped as
they were smaller than the minimum allowable
physical media limit.

Discontinuities in the value of this variable
can o…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.276.1.1.1.1.4
cieIfInGiantsErrs
The number of input packets on a particular
physical interface which were dropped as
they were larger than the ifMtu (largest
permitted size of a packet which can be
sent/received on an interface).

Di…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.276.1.1.1.1.5
cieIfInFramingErrs
The number of input packets on a physical
interface which were misaligned or had
framing errors. This happens when the
format of the incoming packet on a physical
interface is incorrect.

Discontinuities …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.276.1.1.1.1.6
cieIfInOverrunErrs
The number of input packets which arrived
on a particular physical interface which
were too quick for the hardware to receive
and hence the receiver ran out of buffers.

Discontinuities in the value of th…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.276.1.1.1.1.7
cieIfInIgnored
The number of input packets which were simply
ignored by this physical interface due to
insufficient resources to handle the incoming
packets.

For example, this could indicate that the input
receive buff…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.276.1.1.1.1.8
cieIfInAbortErrs
Number of input packets which were dropped
because the receiver aborted.

Examples of this could be when an abort
sequence aborted the input frame or when
there is a collision in an ethernet segment.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.276.1.1.1.1.9
cieIfInputQueueDrops
The number of input packets which were
dropped.

Some reasons why this object could be
incremented are:

o Input queue is full.
o Errors at the receiver hardware
while receiving the pa…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.276.1.1.1.1.10
cieIfOutputQueueDrops
This object indicates the number of output
packets dropped by the interface even though
no error had been detected to prevent them
being transmitted.

The packet could be dropped for many reasons,
which …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.276.1.1.1.1.11
cieIfPacketDiscontinuityTime
The value of sysUpTime on the most recent
occasion at which this interface's counters
suffered a discontinuity.

If no such discontinuities have occurred
since the last re-initialization of the
local m…
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
.1.3.6.1.4.1.9.9.276.1.1.1.1.12
.1.3.6.1.4.1.9.9.276.1.1.2 · 1 row entry · 21 columns
This  table contains objects which provide
more information about interface  
properties not available in IF-MIB
(RFC 2863).
          
Some objects defined in this table may be
applicable to physical interfaces only.
As a result, this table may be sparse for
logical interfaces.
cieIfInterfaceEntry entry .1.3.6.1.4.1.9.9.276.1.1.2.1
An entry into the cieIfInterfaceTable.
Indexes
IF-MIBifIndex
Column Syntax OID
cieIfResetCount
The number of times the interface was
internally reset and brought up.

Some of the actions which can cause this
counter to increment are :

o Bringing an interface up using the
interfac…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.276.1.1.2.1.1
cieIfKeepAliveEnabled
A keepalive is a small, layer-2 message
that is transmitted by a network device
to let directly-connected network devices
know of its presence.

This object returns 'true' if keepalives
are enabled on thi…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.276.1.1.2.1.2
cieIfStateChangeReason
This object displays a human-readable
textual string which describes the
cause of the last state change of the
interface.

Examples of the values this object
can take are:

o 'Lost Carrier…
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.276.1.1.2.1.3
cieIfCarrierTransitionCount
Number of times interface saw the carrier
signal transition.

For example, if a T1 line is unplugged,
then framer will detect the loss of signal
(LOS) on the line and will count it as a
transition.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.276.1.1.2.1.4
cieIfInterfaceDiscontinuityTime
The value of sysUpTime on the most recent
occasion at which this interface's counters
suffered a discontinuity.

If no such discontinuities have occurred
since the last re-initialization of the
local…
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
.1.3.6.1.4.1.9.9.276.1.1.2.1.5
cieIfDhcpMode
The DHCP mode configured by the
administrator.
If 'true' the DHCP is enabled. In which
case an IP address is requested in DHCP.
This is in addition to any that are
configured by the administrator in
'ciiIPAddressTable'…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.276.1.1.2.1.6
cieIfMtu
The MTU configured by the administrator.
This object is exactly same as 'ifMtu' in
ifTable from IF-MIB for the same ifIndex
value , except that it is configurable by the
administrator. For more description of this
obje…
Integer32r/w
Constraints:
range: 40-2147483647
.1.3.6.1.4.1.9.9.276.1.1.2.1.7
cieIfContextName
The ContextName denotes the interface
'context' and is used to logically separate
the MIB management.
RFC 2571 and RFC 2737 describe this approach.
When the agent supports a different SNMP
context, as detailed in RFC 2…
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.9.9.276.1.1.2.1.8
cieIfOperStatusCause
This object represents the detailed
operational cause reason for the current
operational state of the interface.
The current operational state of the interface
is given by the 'ifOperStatus' defined
in IF-MIB.
CISCO-TCIfOperStatusReason
Textual Convention: CISCO-TCIfOperStatusReason Enumeration
Type Values:
1other
2none
3hwFailure
4loopbackDiagFailure
5errorDisabled
6swFailure
7linkFailure
8offline
9nonParticipating
10initializing
11vsanInactive
12adminDown
13channelAdminDown
14channelOperSuspended
15channelConfigurationInProgress
16rcfInProgress
17elpFailureIsolation
18escFailureIsolation
19domainOverlapIsolation
20domainAddrAssignFailureIsolation
21domainOtherSideEportIsolation
22domainInvalidRcfReceived
23domainManagerDisabled
24zoneMergeFailureIsolation
25vsanMismatchIsolation
26parentDown
27srcPortNotBound
28interfaceRemoved
29fcotNotPresent
30fcotVendorNotSupported
31incompatibleAdminMode
32incompatibleAdminSpeed
33suspendedByMode
34suspendedBySpeed
35suspendedByWWN
36domainMaxReTxFailure
37eppFailure
38portVsanMismatchIsolation
39loopbackIsolation
40upgradeInProgress
41incompatibleAdminRxBbCredit
42incompatibleAdminRxBufferSize
43portChannelMembersDown
44zoneRemoteNoRespIsolation
45firstPortUpAsEport
46firstPortNotUp
47peerFCIPPortClosedConnection
48peerFCIPPortResetConnection
49fcipPortMaxReTx
50fcipPortKeepAliveTimerExpire
51fcipPortPersistTimerExpire
52fcipPortSrcLinkDown
53fcipPortSrcAdminDown
54fcipPortAdminCfgChange
55fcipSrcPortRemoved
56fcipSrcModuleNotOnline
57invalidConfig
58portBindFailure
59portFabricBindFailure
60noCommonVsanIsolation
61ficonVsanDown
62invalidAttachment
63portBlocked
64incomAdminRxBbCreditPerBuf
65tooManyInvalidFlogis
66deniedDueToPortBinding
67elpFailureRevMismatch
68elpFailureClassFParamErr
69elpFailureClassNParamErr
70elpFailureUnknownFlowCtlCode
71elpFailureInvalidFlowCtlParam
72elpFailureInvalidPortName
73elpFailureInvalidSwitchName
74elpFailureRatovEdtovMismatch
75elpFailureLoopbackDetected
76elpFailureInvalidTxBbCredit
77elpFailureInvalidPayloadSize
78bundleMisCfg
79bitErrRuntimeThreshExceeded
80linkFailLinkReset
81linkFailPortInitFail
82linkFailPortUnusable
83linkFailLossOfSignal
84linkFailLossOfSync
85linkFailNosRcvd
86linkFailOLSRcvd
87linkFailDebounceTimeout
88linkFailLrRcvd
89linkFailCreditLoss
90linkFailRxQOverflow
91linkFailTooManyInterrupts
92linkFailLipRcvdBb
93linkFailBbCreditLoss
94linkFailOpenPrimSignalTimeout
95linkFailOpenPrimSignalReturned
96linkFailLipF8Rcvd
97linkFailLineCardPortShutdown
98fcspAuthenfailure
99fcotChecksumError
100ohmsExtLoopbackTest
101invalidFabricBindExchange
102tovMismatch
103ficonNotEnabled
104ficonNoPortNumber
105ficonBeingEnabled
106ePortProhibited
107portGracefulShutdown
108trunkNotFullyActive
109fabricBindingSwitchWwnNotFound
110fabricBindingDomainInvalid
111fabricBindingDbMismatch
112fabricBindingNoRspFromPeer
113dpvmVsanSuspended
114dpvmVsanNotFound
115trackedPortDown
116ecSuspendedOnLoop
117isolateBundleMisCfg
118noPeerBundleSupport
119portBringupIsolation
120domainNotAllowedIsolated
121virtualIvrDomainOverlapIsolation
122outOfService
123portAuthFailed
124bundleStandby
125portConnectorTypeErr
126errorDisabledReInitLmtReached
127ficonDupPortNum
128localRcf
129twoSwitchesWithSameWWN
130invalidOtherSidePrincEFPReqRecd
131domainOther
132elpFailureAllZeroPeerWWNRcvd
133preferredPathIsolation
134fcRedirectIsolation
135portActLicenseNotAvailable
136sdmIsolation
137fcidAllocationFailed
138externallyDisabled
139unavailableNPVUpstreamPort
140unavailableNPVPrefUpstreamPort
141sfpReadError
142stickyDownOnLinkFailure
143tooManyLinkFlapsErr
144unidirectionalUDLD
145txRxLoopUDLD
146neighborMismatchUDLD
147authzPending
148hotStdbyInBundle
149incompleteConfig
150incompleteTunnelCfg
151hwProgrammingFailed
152tunnelDstUnreachable
153suspendByMtu
154sfpInvalid
155sfpAbsent
156portCapabilitiesUnknown
157channelErrDisabled
158vrfMismatch
159vrfForwardReferencing
160dupTunnelConfigDetected
161primaryVLANDown
162vrfUnusable
163errDisableHandShkFailure
164errDisabledBPDUGuard
165dot1xSecViolationErrDisabled
166emptyEchoUDLD
167vfTaggingCapErr
168portDisabled
169tunnelModeNotConfigured
170tunnelSrcNotConfigured
171tunnelDstNotConfigured
172tunnelUnableToResolveSrcIP
173tunnelUnableToResolveDstIP
174tunnelVrfDown
175sifAdminDown
176phyIntfDown
177ifSifLimitExceeded
178sifHoldDown
179noFcoe
180dcxCompatMismatch
181isolateBundleLimitExceeded
182sifNotBound
183errDisabledLacpMiscfg
184satFabricIfDown
185invalidSatFabricIf
186noRemoteChassis
187vicEnableNotReceived
188vicDisableReceived
189vlanVsanMappingNotEnabled
190stpNotFwdingInFcoeMappedVlan
191moduleOffline
192udldAggModeLinkFailure
193stpInconsVpcPeerDisabled
194setPortStateFailed
195suspendedByVpc
196vpcCfgInProgress
197vpcPeerLinkDown
198vpcNoRspFromPeer
199protoPortSuspend
200tunnelSrcDown
201cdpInfoUnavailable
202fexSfpInvalid
203errDisabledIpConflict
204fcotClkRateMismatch
205portGuardTrustSecViolation
206sdpTimeout
207satIncompatTopo
208waitForFlogi
209satNotConfigured
210npivNotEnabledInUpstream
211vsanMismatchWithUpstreamSwPort
212portGuardBitErrRate
213portGuardSigLoss
214portGuardSyncLoss
215portGuardLinkReset
216portGuardCreditLoss
217ipQosMgrPolicyAppFailure
218pauseRateLimitErrDisabled
219lstGrpUplinkDown
220stickyDnLinkFailure
221routerMacFailure
222dcxMultipleMsapIds
223dcxHundredPdusRcvdNoAck
224enmSatIncompatibleUplink
225enmLoopDetected
226nonStickyExternallyDisabled
227subGroupIdNotAssigned
228vemUnlicensed
229profileNotFound
230nonExistentVlan
231vlanInvalidType
232vlanDown
233vpcPeerUpgrade
234ipQosDcbxpCompatFailure
235nonCiscoHbaVfTag
236domainIdConfigMismatch
237sfpSpeedMismatch
238xcvrInitializing
239xcvrAbsent
240xcvrInvalid
241vfcBindingInvalid
242vlanNotFcoeEnabled
243pvlanNativeVlanErr
244ethL2VlanDown
245ethIntfInvalidBinding
246pmonFailure
247l3NotReady
248speedMismatch
249flowControlMismatch
250vdcMode
251suspendedDueToMinLinks
252enmPinFailLinkDown
253inactiveM1PortFpathActiveVlan
254parentPortDown
255moduleRemoved
256corePortMct
257nonCorePortMct
258ficonInorderNotActive
259invalidEncapsulation
260modemLineDeasserted
261ipSecHndshkInProgress
262sfpEthCompliantErr
263cellularModemUnattached
264outOfGlblRxBuffers
265sfpFcCompliantErr
266ethIntfNotLicensed
267domainIdsInvalid
268fabricNameInvalid
269ficonNoPortSwapLogicalPort
270ficonInvalidPortNum
271remotePortInL2vpnDown
272suspendedDueToNoLacpPdus
273fcotValidationFailedAtDriver
274unsupportedTransceiverMd5DigestNotSame
275unsupportedTransceiver
276adminStateConfigChange
277vlanAllowedList
278vlanAllowedListOverride
279vlanAllowedListAdd
280vlanAllowedRemove
281vlanCfgStateChange
282vlanCfgDelete
283pppPeerNotResponding
284pppAuthFailed
285xcvrAuthFailed
286badFramesRcvdFromLink
287physicalPortHotStandBy
288wimaxModemUnattached
289wpanModemUnattached
290rbhModulo
291fpcMinLinkNotMet
292misCabling
293rcvSrpOnNonFcoeFex
294acessPortOnBd
295lacpMisConfig
300fortyGMemberPort
301goldLoopBackTest
302edpError
303vpcCompCheckFailed
304aclQosNoResource
305vpcShutdown
306notPcMember
307systemIntfShut
308speedGroupConfigMisMatch
310dot1qMisConfig
311mdMisMatch
312vpcPeerLinkShut
313notAvailable
.1.3.6.1.4.1.9.9.276.1.1.2.1.9
cieIfOperStatusCauseDescr
The description for the cause of current
operational state of the interface, given
by the object 'cieIfOperStatusCause'.

For an interface whose 'ifOperStatus' is not
'down' the value of this object will …
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.276.1.1.2.1.10
cieIfSpeedReceive
An estimate of the interface's current receive bandwidth in
bits per second. This object is provided for interface with
asymmetric interface speeds like ADSL and should be used in
conjunction with ifSpeed object. For …
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.276.1.1.2.1.11
cieIfHighSpeedReceive
An estimate of the interface's current receive bandwidth in
units of 1,000,000 bits per second. If this object reports a
value of `n' then the speed of the interface is somewhere in the
range of `n-500,000' to `n+499,9…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.276.1.1.2.1.12
cieIfOwner
This data type is used to model an administratively assigned
name of the current owner of the interface resource. This
information is taken from the NVT ASCII character set. It is
suggested that this name contain one…
OctetStringr/w
Constraints:
range: 0-80
.1.3.6.1.4.1.9.9.276.1.1.2.1.13
cieIfSharedConfig
This object indicates the current configuration of
interface sharing on the given interface.

'notApplicable' - the interface sharing configuration on
this interface is not applicable.
'owner…
Enumeration
Enumerated Values:
1notApplicable
2ownerDedicated
3ownerShared
4sharedOnly
.1.3.6.1.4.1.9.9.276.1.1.2.1.14
cieIfSpeedGroupConfig
This object specifies the current speed group
configuration on the given interface.

'notApplicable' - the interface speed group configuration on
this interface is not applicable. It is a
Enumerationr/w
Enumerated Values:
1notApplicable
2tenG
3oneTwoFourEightG
4twoFourEightSixteenG
5fourEightSixteenThirtyTwoG
6eightSixteenThirtyTwoSixtyFourG
.1.3.6.1.4.1.9.9.276.1.1.2.1.15
cieIfTransceiverFrequencyConfig
This object specifies the current transceiver frequency
configuration on the given interface.

'notApplicable' - the interface transceiver frequency
configuration on this interface
Enumerationr/w
Enumerated Values:
1notApplicable
2fibreChannel
3ethernet
.1.3.6.1.4.1.9.9.276.1.1.2.1.16
cieIfFillPatternConfig
This object specifies the current switchport fill pattern
configuration on the given interface.

'arbff8G' - the inter frame gap fill pattern is
ARBFF for 8G speed.
'idle8G' - the inter frame g…
Enumerationr/w
Enumerated Values:
1arbff8G
2idle8G
.1.3.6.1.4.1.9.9.276.1.1.2.1.17
cieIfIgnoreBitErrorsConfig
This object specifies the current switchport biterrors
configuration on the given interface.

If 'true(1)' the ignore bit errors is enabled.In which case
the interface ignores bit errors.
If 'false(2)' the…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.276.1.1.2.1.18
cieIfIgnoreInterruptThresholdConfig
This object specifies the current interrupt threshold
configuration on the given interface.

'If 'true(1)' the ignore interrupt thresholds is enabled.
In which case the interface ignores interrupt threshol…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.276.1.1.2.1.19
cieIfDuplexCfgStatus
This object specifies the configured duplex status on the
given interface.
Enumerationr/w
Enumerated Values:
0full
1half
2auto
3unsupported
.1.3.6.1.4.1.9.9.276.1.1.2.1.20
cieIfDuplexDetectStatus
This object specifies the detected duplex status on the
given interface.
Enumerationr/w
Enumerated Values:
0full
1half
2auto
3unknown
4invalid
.1.3.6.1.4.1.9.9.276.1.1.2.1.21
.1.3.6.1.4.1.9.9.276.1.1.3 · 1 row entry · 5 columns
This table contains objects for providing
the 'ifIndex', interface operational mode and 
interface operational cause for all the 
interfaces in the modules.
          
This table contains one entry for each 
64 interfaces in an module.
          
This table provides efficient way of encoding 
'ifIndex', interface operational mode and
interface operational cause, from the point 
of retrieval, by combining the values a set 
of 64 interfaces in a single MIB object.
cieIfStatusListEntry entry .1.3.6.1.4.1.9.9.276.1.1.3.1
Each entry represents the 'ifIndex',
interface operational mode and interface
operational cause for a set of 64 interfaces
in a module.
Indexes
ENTITY-MIBentPhysicalIndex cieIfStatusListIndex
Column Syntax OID
cieIfStatusListIndex
An arbitrary integer value, greater than
zero, which identifies a list of 64 interfaces
within a module.
Unsigned32
Constraints:
range: 1-33554432
.1.3.6.1.4.1.9.9.276.1.1.3.1.1
cieInterfacesIndex
This object represents the 'ifIndex' for a
set of 64 interfaces in the module.
InterfaceIndexList
Textual Convention: InterfaceIndexList OctetString
Type Constraints:
range: 0..256
.1.3.6.1.4.1.9.9.276.1.1.3.1.2
cieInterfacesOperMode
This object represents the operational mode
for a set of 64 interfaces in the module.
InterfaceOperModeList
Textual Convention: InterfaceOperModeList OctetString
Type Constraints:
range: 0..64
.1.3.6.1.4.1.9.9.276.1.1.3.1.3
cieInterfacesOperCause
This object represents the operational status
cause for a set of 64 interfaces in the
module.
InterfaceOperCauseList
Textual Convention: InterfaceOperCauseList OctetString
Type Constraints:
range: 0..128
.1.3.6.1.4.1.9.9.276.1.1.3.1.4
cieInterfaceOwnershipBitmap
This object indicates the status for a set of 64 interfaces
in a module regarding whether or not each interface is
administratively assigned a name of the current owner of the
interface resource as per cieIfOwner.
InterfaceOwnershipList
Textual Convention: InterfaceOwnershipList OctetString
Type Constraints:
range: 0..8
.1.3.6.1.4.1.9.9.276.1.1.3.1.5
.1.3.6.1.4.1.9.9.276.1.1.4 · 1 row entry · 8 columns
This table contains VL (Virtual Link) statistics
for a capable interface.
          
Objects defined in this table may be 
applicable to physical interfaces only.
cieIfVlStatsEntry entry .1.3.6.1.4.1.9.9.276.1.1.4.1
Each row contains managed objects for
Virtual Link statistics on interface capable of
providing this information.
Indexes
IF-MIBifIndex
Column Syntax OID
cieIfNoDropVlInPkts
This object indicates the number of input
packets on all No-Drop Virtual Links belonged
to this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.276.1.1.4.1.1
cieIfNoDropVlInOctets
This object indicates the number of input
octets on all No-Drop Virtual Links belonged
to this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.276.1.1.4.1.2
cieIfNoDropVlOutPkts
This object indicates the number of output
packets on all No-Drop Virtual Links belonged
to this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.276.1.1.4.1.3
cieIfNoDropVlOutOctets
This object indicates the number of output
octets on all No-Drop Virtual Links belonged
to this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.276.1.1.4.1.4
cieIfDropVlInPkts
This object indicates the number of input
packets on all Drop Virtual Links belonged
to this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.276.1.1.4.1.5
cieIfDropVlInOctets
This object indicates the number of input
octets on all Drop Virtual Links belonged
to this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.276.1.1.4.1.6
cieIfDropVlOutPkts
This object indicates the number of output
packets on all Drop Virtual Links belonged
to this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.276.1.1.4.1.7
cieIfDropVlOutOctets
This object indicates the number of output
octets on all Drop Virtual Links belonged
to this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.276.1.1.4.1.8
.1.3.6.1.4.1.9.9.276.1.2.5 · 1 row entry · 2 columns
This table lists configuration data relating to ifIndex
persistence.
          
This table has a sparse dependent relationship on the ifTable,
containing a row for each ifEntry corresponding to an interface
for which ifIndex persistence is supported.
cieIfIndexPersistenceEntry entry .1.3.6.1.4.1.9.9.276.1.2.5.1
Each entry represents ifindex persistence configuration for an
interface specified by ifIndex. Whenever an interface which
supports ifindex persistence is created/destroyed in the
ifTable, the corresponding ifindex pers…
Indexes
IF-MIBifIndex
Column Syntax OID
cieIfIndexPersistenceEnabled deprecated
This object specifies whether the interface's ifIndex value
persist across reinitialization.

Due to change in syntax, this object is deprecated by
cieIfIndexPersistenceControl.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.276.1.2.5.1.1
cieIfIndexPersistenceControl
This object specifies whether the interface's ifIndex value
persist across reinitialization. In global state, the interface
uses the global setting data for persistence i.e.
cieIfIndexGlobalPersistence.
IfIndexPersistenceStater/w
Textual Convention: IfIndexPersistenceState Enumeration
Type Values:
1disable
2enable
3global
.1.3.6.1.4.1.9.9.276.1.2.5.1.2
.1.3.6.1.4.1.9.9.276.1.3.1 · 1 row entry · 2 columns
A list of the interfaces that support
the 802.1q custom Ethertype feature.
cieIfDot1qCustomEtherTypeEntry entry .1.3.6.1.4.1.9.9.276.1.3.1.1
An entry containing the custom EtherType
information for the interface.

Only interfaces with custom 802.1q
ethertype control are listed in the
table.
Indexes
IF-MIBifIndex
Column Syntax OID
cieIfDot1qCustomAdminEtherType
The Dot1qEtherType allow administrator
to select a non-standard (other than 0x8100)
2-byte ethertype for the interface to
interoperate with third party vendor's system
that do not use the standard 0x8100 ethertype
to i…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.9.276.1.3.1.1.1
cieIfDot1qCustomOperEtherType
The current operational value of the
802.1q ethertype for the interface.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.9.276.1.3.1.1.2
.1.3.6.1.4.1.9.9.276.1.4.1 · 1 row entry · 5 columns
This table contains the interface utilization
rates for inbound and outbound traffic on an
interface.
cieIfUtilEntry entry .1.3.6.1.4.1.9.9.276.1.4.1.1
An entry containing utilization rates for the
interface.

Every interface for which the inbound and
outbound traffic information is available
has a corresponding entry in this table.
Indexes
IF-MIBifIndex
Column Syntax OID
cieIfInPktRate
By default, this is the five minute
exponentially-decayed moving average of the
inbound packet rate for this interface.
However, if the corresponding instance of
cieIfInterval is instantiated with a value
which specifie…
packets per secondSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.276.1.4.1.1.1
cieIfInOctetRate
By default, this is the five minute
exponentially-decayed moving average of the
inbound octet rate for this interface.
However, if the corresponding instance of
cieIfInterval is instantiated with a value
which specifies…
octets per secondSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.276.1.4.1.1.2
cieIfOutPktRate
By default, this is the five minute
exponentially-decayed moving average of the
outbound packet rate for this interface.
However, if the corresponding instance of
cieIfInterval is instantiated with a value
which specifi…
packets per secondSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.276.1.4.1.1.3
cieIfOutOctetRate
By default, this is the five minute
exponentially-decayed moving average of the
outbound octet rate for this interface.
However, if the corresponding instance of
cieIfInterval is instantiated with a value
which specifie…
octets per secondSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.276.1.4.1.1.4
cieIfInterval
This object specifies the time interval over which
the inbound and outbound traffic rates are
calculated for this interface.
secondsUnsigned32r/w
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.9.9.276.1.4.1.1.5
.1.3.6.1.4.1.9.9.276.1.5.1 · 1 row entry · 1 columns
This table contains the mappings of the
ifIndex of an interface to its
corresponding dot1dBasePort value.
cieIfDot1dBaseMappingEntry entry .1.3.6.1.4.1.9.9.276.1.5.1.1
An entry containing the mapping between
the ifIndex value of an interface and its
corresponding dot1dBasePort value.

Every interface which has been assigned
a dot1dBasePort value by the system
has a corresp…
Indexes
IF-MIBifIndex
Column Syntax OID
cieIfDot1dBaseMappingPort
The dot1dBasePort value for this interface.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.9.9.276.1.5.1.1.1
.1.3.6.1.4.1.9.9.276.1.6.1 · 1 row entry · 2 columns
This table contains objects for providing
the 'ifName' to 'ifIndex' mapping.
This table contains one entry for each
valid 'ifName' available in the system.
Upon the first request, the implementation
of this table will get all the available
ifNames, and it will populate the entries
in this table, it maintains this ifNames
in a cache for ~30 seconds.
cieIfNameMappingEntry entry .1.3.6.1.4.1.9.9.276.1.6.1.1
An entry into the cieIfNameMappingTable.
Indexes
cieIfName
Column Syntax OID
cieIfName
Represents an interface name mentioned
in the 'ifName' object of this system.
OctetString
Constraints:
range: 1-112
.1.3.6.1.4.1.9.9.276.1.6.1.1.1
cieIfIndex
This object represents the 'ifIndex'
corresponding to the interface name mentioned
in the 'cieIfName' object of this instance.
If the 'ifName' mentioned in the 'cieIfName'
object of this instance corresponds to multipl…
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.9.9.276.1.6.1.1.2