cieIfInputQueueDrops
CISCO-IF-EXTENSION-MIB ·
.1.3.6.1.4.1.9.9.276.1.1.1.1.10
Object
column
SNMPv2-SMICounter32
The number of input packets which were
dropped.
Some reasons why this object could be
incremented are:
o Input queue is full.
o Errors at the receiver hardware
while receiving the packet.
Discontinuities in the value of this variable
can occur at re-initialization of the
management system, and at other times as
indicated by the values of
cieIfPacketDiscontinuityTime.
Context
- MIB
- CISCO-IF-EXTENSION-MIB
- OID
.1.3.6.1.4.1.9.9.276.1.1.1.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cieIfPacketStatsEntry
- Table
- cieIfPacketStatsTable
- Siblings
- 11
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cieIfLastInTime This object represents the elapsed time in
milliseconds since last protocol input
packet was received.
Discontinuities in the value of this variable
can occur at r… | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.1 |
| cieIfOutputQueueDrops This object indicates the number of output
packets dropped by the interface even though
no error had been detected to prevent them
being transmitted.
The packet c… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.11 |
| cieIfPacketDiscontinuityTime The value of sysUpTime on the most recent
occasion at which this interface's counters
suffered a discontinuity.
If no such discontinuities have occurred
since th… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.276.1.1.1.1.12 |
| cieIfLastOutTime This object represents the elapsed time in
milliseconds since last protocol output
packet was transmitted.
Discontinuities in the value of this variable
can occur… | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.2 |
| cieIfLastOutHangTime This object represents the elapsed time in
milliseconds since last protocol output
packet could not be successfully transmitted.
Discontinuities in the value of … | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.3 |
| cieIfInRuntsErrs The number of packets input on a particular
physical interface which were dropped as
they were smaller than the minimum allowable
physical media limit.
Discontinui… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.4 |
| cieIfInGiantsErrs The number of input packets on a particular
physical interface which were dropped as
they were larger than the ifMtu (largest
permitted size of a packet which can be
sent/rece… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.5 |
| cieIfInFramingErrs The number of input packets on a physical
interface which were misaligned or had
framing errors. This happens when the
format of the incoming packet on a physical
interface is in… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.6 |
| cieIfInOverrunErrs The number of input packets which arrived
on a particular physical interface which
were too quick for the hardware to receive
and hence the receiver ran out of buffers.
… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.7 |
| cieIfInIgnored The number of input packets which were simply
ignored by this physical interface due to
insufficient resources to handle the incoming
packets.
For example, this co… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.8 |
| cieIfInAbortErrs Number of input packets which were dropped
because the receiver aborted.
Examples of this could be when an abort
sequence aborted the input frame or when
there is a… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.9 |