cieIfSpeedGroupConfig

CISCO-IF-EXTENSION-MIB · .1.3.6.1.4.1.9.9.276.1.1.2.1.15

Object

column r/w Enumeration

This object specifies the current speed group
configuration on the given interface.
              
'notApplicable' - the interface speed group configuration on
            this interface is not applicable. It is a 
            read-only value.
'10G' - the interface speed group configuration on
            this interface as 10G.
'1G-2G-4G-8G' - the interface speed group configuration 
            on this interface as 1G-2G-4G-8G.
'2G-4G-8G-16G' - the interface speed group configuration 
            on this interface as 2G-4G-8G-16G.
'4G-8G-16G-32G' - the interface speed group configuration 
            on this interface as 4G-8G-16G-32G.
'8G-16G-32G-64G' - the interface speed group configuration 
            on this interface as 8G-16G-32G-64G.

Context

MIB: CISCO-IF-EXTENSION-MIB
OID: .1.3.6.1.4.1.9.9.276.1.1.2.1.15
Type: column
Access: readwrite
Status: current
Parent: cieIfInterfaceEntry
Table: cieIfInterfaceTable
Siblings: 20

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	notApplicable
`2`	tenG
`3`	oneTwoFourEightG
`4`	twoFourEightSixteenG
`5`	fourEightSixteenThirtyTwoG
`6`	eightSixteenThirtyTwoSixtyFourG

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cieIfResetCount The number of times the interface was internally reset and brought up. Some of the actions which can cause this counter to increment are : o Bringin…	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.276.1.1.2.1.1`
cieIfOperStatusCauseDescr The description for the cause of current operational state of the interface, given by the object 'cieIfOperStatusCause'. For an interface whose 'ifOperStatus' is n…	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.276.1.1.2.1.10`
cieIfSpeedReceive An estimate of the interface's current receive bandwidth in bits per second. This object is provided for interface with asymmetric interface speeds like ADSL and should be used i…	column	SNMPv2-SMIGauge32	`.1.3.6.1.4.1.9.9.276.1.1.2.1.11`
cieIfHighSpeedReceive An estimate of the interface's current receive bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere…	column	SNMPv2-SMIGauge32	`.1.3.6.1.4.1.9.9.276.1.1.2.1.12`
cieIfOwner This data type is used to model an administratively assigned name of the current owner of the interface resource. This information is taken from the NVT ASCII character set. It …	column	OctetString	`.1.3.6.1.4.1.9.9.276.1.1.2.1.13`
cieIfSharedConfig This object indicates the current configuration of interface sharing on the given interface. 'notApplicable' - the interface sharing configuration on t…	column	Enumeration	`.1.3.6.1.4.1.9.9.276.1.1.2.1.14`
cieIfTransceiverFrequencyConfig This object specifies the current transceiver frequency configuration on the given interface. 'notApplicable' - the interface transceiver frequency …	column	Enumeration	`.1.3.6.1.4.1.9.9.276.1.1.2.1.16`
cieIfFillPatternConfig This object specifies the current switchport fill pattern configuration on the given interface. 'arbff8G' - the inter frame gap fill pattern is ARBFF fo…	column	Enumeration	`.1.3.6.1.4.1.9.9.276.1.1.2.1.17`
cieIfIgnoreBitErrorsConfig This object specifies the current switchport biterrors configuration on the given interface. If 'true(1)' the ignore bit errors is enabled.In which case the interfa…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.276.1.1.2.1.18`
cieIfIgnoreInterruptThresholdConfig This object specifies the current interrupt threshold configuration on the given interface. 'If 'true(1)' the ignore interrupt thresholds is enabled. In which case …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.276.1.1.2.1.19`
cieIfKeepAliveEnabled A keepalive is a small, layer-2 message that is transmitted by a network device to let directly-connected network devices know of its presence. This object returns…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.276.1.1.2.1.2`
cieIfDuplexCfgStatus This object specifies the configured duplex status on the given interface.	column	Enumeration	`.1.3.6.1.4.1.9.9.276.1.1.2.1.20`
cieIfDuplexDetectStatus This object specifies the detected duplex status on the given interface.	column	Enumeration	`.1.3.6.1.4.1.9.9.276.1.1.2.1.21`
cieIfStateChangeReason This object displays a human-readable textual string which describes the cause of the last state change of the interface. Examples of the values this object can t…	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.276.1.1.2.1.3`
cieIfCarrierTransitionCount Number of times interface saw the carrier signal transition. For example, if a T1 line is unplugged, then framer will detect the loss of signal (LOS) on the line …	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.276.1.1.2.1.4`
cieIfInterfaceDiscontinuityTime The value of sysUpTime on the most recent occasion at which this interface's counters suffered a discontinuity. If no such discontinuities have occurred since …	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.9.9.276.1.1.2.1.5`
cieIfDhcpMode The DHCP mode configured by the administrator. If 'true' the DHCP is enabled. In which case an IP address is requested in DHCP. This is in addition to any that are configured by …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.276.1.1.2.1.6`
cieIfMtu The MTU configured by the administrator. This object is exactly same as 'ifMtu' in ifTable from IF-MIB for the same ifIndex value , except that it is configurable by the administ…	column	Integer32	`.1.3.6.1.4.1.9.9.276.1.1.2.1.7`
cieIfContextName The ContextName denotes the interface 'context' and is used to logically separate the MIB management. RFC 2571 and RFC 2737 describe this approach. When the agent supports a diffe…	column	OctetString	`.1.3.6.1.4.1.9.9.276.1.1.2.1.8`
cieIfOperStatusCause This object represents the detailed operational cause reason for the current operational state of the interface. The current operational state of the interface is given by the …	column	CISCO-TCIfOperStatusReason	`.1.3.6.1.4.1.9.9.276.1.1.2.1.9`