cieIfOperStatusCauseDescr
CISCO-IF-EXTENSION-MIB ·
.1.3.6.1.4.1.9.9.276.1.1.2.1.10
Object
column
SNMP-FRAMEWORK-MIBSnmpAdminString
The description for the cause of current
operational state of the interface, given
by the object 'cieIfOperStatusCause'.
For an interface whose 'ifOperStatus' is not
'down' the value of this object will be
'none'.
Context
- MIB
- CISCO-IF-EXTENSION-MIB
- OID
.1.3.6.1.4.1.9.9.276.1.1.2.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cieIfInterfaceEntry
- Table
- cieIfInterfaceTable
- Siblings
- 20
Syntax
SNMP-FRAMEWORK-MIBSnmpAdminString
- Source
- SNMP-FRAMEWORK-MIBSnmpAdminString
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cieIfResetCount The number of times the interface was
internally reset and brought up.
Some of the actions which can cause this
counter to increment are :
o Bringin… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.276.1.1.2.1.1 |
| cieIfSpeedReceive An estimate of the interface's current receive bandwidth in
bits per second. This object is provided for interface with
asymmetric interface speeds like ADSL and should be used i… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.276.1.1.2.1.11 |
| cieIfHighSpeedReceive An estimate of the interface's current receive bandwidth in
units of 1,000,000 bits per second. If this object reports a
value of `n' then the speed of the interface is somewhere… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.276.1.1.2.1.12 |
| cieIfOwner This data type is used to model an administratively assigned
name of the current owner of the interface resource. This
information is taken from the NVT ASCII character set. It … | column | OctetString | .1.3.6.1.4.1.9.9.276.1.1.2.1.13 |
| cieIfSharedConfig This object indicates the current configuration of
interface sharing on the given interface.
'notApplicable' - the interface sharing configuration on
t… | column | Enumeration | .1.3.6.1.4.1.9.9.276.1.1.2.1.14 |
| cieIfSpeedGroupConfig This object specifies the current speed group
configuration on the given interface.
'notApplicable' - the interface speed group configuration on
this in… | column | Enumeration | .1.3.6.1.4.1.9.9.276.1.1.2.1.15 |
| cieIfTransceiverFrequencyConfig This object specifies the current transceiver frequency
configuration on the given interface.
'notApplicable' - the interface transceiver frequency
… | column | Enumeration | .1.3.6.1.4.1.9.9.276.1.1.2.1.16 |
| cieIfFillPatternConfig This object specifies the current switchport fill pattern
configuration on the given interface.
'arbff8G' - the inter frame gap fill pattern is
ARBFF fo… | column | Enumeration | .1.3.6.1.4.1.9.9.276.1.1.2.1.17 |
| cieIfIgnoreBitErrorsConfig This object specifies the current switchport biterrors
configuration on the given interface.
If 'true(1)' the ignore bit errors is enabled.In which case
the interfa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.276.1.1.2.1.18 |
| cieIfIgnoreInterruptThresholdConfig This object specifies the current interrupt threshold
configuration on the given interface.
'If 'true(1)' the ignore interrupt thresholds is enabled.
In which case … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.276.1.1.2.1.19 |
| cieIfKeepAliveEnabled A keepalive is a small, layer-2 message
that is transmitted by a network device
to let directly-connected network devices
know of its presence.
This object returns… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.276.1.1.2.1.2 |
| cieIfDuplexCfgStatus This object specifies the configured duplex status on the
given interface. | column | Enumeration | .1.3.6.1.4.1.9.9.276.1.1.2.1.20 |
| cieIfDuplexDetectStatus This object specifies the detected duplex status on the
given interface. | column | Enumeration | .1.3.6.1.4.1.9.9.276.1.1.2.1.21 |
| cieIfStateChangeReason This object displays a human-readable
textual string which describes the
cause of the last state change of the
interface.
Examples of the values this object
can t… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.276.1.1.2.1.3 |
| cieIfCarrierTransitionCount Number of times interface saw the carrier
signal transition.
For example, if a T1 line is unplugged,
then framer will detect the loss of signal
(LOS) on the line … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.276.1.1.2.1.4 |
| cieIfInterfaceDiscontinuityTime The value of sysUpTime on the most recent
occasion at which this interface's counters
suffered a discontinuity.
If no such discontinuities have occurred
since … | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.276.1.1.2.1.5 |
| cieIfDhcpMode The DHCP mode configured by the
administrator.
If 'true' the DHCP is enabled. In which
case an IP address is requested in DHCP.
This is in addition to any that are
configured by … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.276.1.1.2.1.6 |
| cieIfMtu The MTU configured by the administrator.
This object is exactly same as 'ifMtu' in
ifTable from IF-MIB for the same ifIndex
value , except that it is configurable by the
administ… | column | Integer32 | .1.3.6.1.4.1.9.9.276.1.1.2.1.7 |
| cieIfContextName The ContextName denotes the interface
'context' and is used to logically separate
the MIB management.
RFC 2571 and RFC 2737 describe this approach.
When the agent supports a diffe… | column | OctetString | .1.3.6.1.4.1.9.9.276.1.1.2.1.8 |
| cieIfOperStatusCause This object represents the detailed
operational cause reason for the current
operational state of the interface.
The current operational state of the interface
is given by the … | column | CISCO-TCIfOperStatusReason | .1.3.6.1.4.1.9.9.276.1.1.2.1.9 |