cieIfInIgnored
CISCO-IF-EXTENSION-MIB ·
.1.3.6.1.4.1.9.9.276.1.1.1.1.8
Object
column
SNMPv2-SMICounter32
The number of input packets which were simply
ignored by this physical interface due to
insufficient resources to handle the incoming
packets.
For example, this could indicate that the input
receive buffers are not available or that the
receiver lost a packet.
Discontinuities in the value of this variable
can occur at re-initialization of the
management system, and at other times as
indicated by the values of
cieIfPacketDiscontinuityTime.
Context
- MIB
- CISCO-IF-EXTENSION-MIB
- OID
.1.3.6.1.4.1.9.9.276.1.1.1.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cieIfPacketStatsEntry
- Table
- cieIfPacketStatsTable
- Siblings
- 11
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cieIfLastInTime This object represents the elapsed time in
milliseconds since last protocol input
packet was received.
Discontinuities in the value of this variable
can occur at r… | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.1 |
| cieIfInputQueueDrops The number of input packets which were
dropped.
Some reasons why this object could be
incremented are:
o Input queue is full.
o Errors at the rece… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.10 |
| cieIfOutputQueueDrops This object indicates the number of output
packets dropped by the interface even though
no error had been detected to prevent them
being transmitted.
The packet c… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.11 |
| cieIfPacketDiscontinuityTime The value of sysUpTime on the most recent
occasion at which this interface's counters
suffered a discontinuity.
If no such discontinuities have occurred
since th… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.276.1.1.1.1.12 |
| cieIfLastOutTime This object represents the elapsed time in
milliseconds since last protocol output
packet was transmitted.
Discontinuities in the value of this variable
can occur… | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.2 |
| cieIfLastOutHangTime This object represents the elapsed time in
milliseconds since last protocol output
packet could not be successfully transmitted.
Discontinuities in the value of … | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.3 |
| cieIfInRuntsErrs The number of packets input on a particular
physical interface which were dropped as
they were smaller than the minimum allowable
physical media limit.
Discontinui… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.4 |
| cieIfInGiantsErrs The number of input packets on a particular
physical interface which were dropped as
they were larger than the ifMtu (largest
permitted size of a packet which can be
sent/rece… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.5 |
| cieIfInFramingErrs The number of input packets on a physical
interface which were misaligned or had
framing errors. This happens when the
format of the incoming packet on a physical
interface is in… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.6 |
| cieIfInOverrunErrs The number of input packets which arrived
on a particular physical interface which
were too quick for the hardware to receive
and hence the receiver ran out of buffers.
… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.7 |
| cieIfInAbortErrs Number of input packets which were dropped
because the receiver aborted.
Examples of this could be when an abort
sequence aborted the input frame or when
there is a… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.276.1.1.1.1.9 |