CISCO-DS3-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
9
Rows
9
Columns
107
cds3ConfigTable
table.1.3.6.1.4.1.9.9.132.1.1.1
·
1 row entry
·
10 columns
The DS3 Configuration table. The table has objects for configuring a T3/E3 line.
An entry in the table. There is an entry for each available
T3/E3 line, with an ifType value of 'ds3'(30).
By default, lines are disabled. 'ifAdmin' from ifTable must be
used to up the line. The objects in this table ca…
T3/E3 line, with an ifType value of 'ds3'(30).
By default, lines are disabled. 'ifAdmin' from ifTable must be
used to up the line. The objects in this table ca…
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
cds3LineType
This variable indicates the variety of DS3 C-bit
or E3 application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps and E3 i… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.132.1.1.1.1.1 |
||||||||||||||||||||||||||||||||||||
|
cds3LineAIScBitsCheck
When check(1) is set, then Alarm Indication Signal (AIS)
is declared when '1010...'b is found and C-Bits are all zero. When ignore(2) is set, an AIS condition is declared when the '1010...'b is detected irrespectiv… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.132.1.1.1.1.2 |
||||||||||||||||||||||||||||||||||||
|
cds3LineRcvFEACValidation
This entry specifies the FEAC (Far End Alarm and Control) code
validation criteria. If 'fEACCodes4Of5' is specified, then a valid FEAC code is declared if 4 of 5 codes match. When 'fEACCodes8Of10' is specified, then a… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.132.1.1.1.1.3 |
||||||||||||||||||||||||||||||||||||
|
cds3LineOOFCriteria
This entry specifies the out of frame(OOF) decision criteria.
If 'bits3Of8' is specified then an OOF condition is declared if at least 3 of 8 framing bits are in error. When 'bits3Of16' is specified then OOF is declared… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.132.1.1.1.1.4 |
||||||||||||||||||||||||||||||||||||
|
cds3TraceToTransmit
Transmitted G.832 Trail Trace string.
|
OctetStringr/w Constraints: range: 1-16 |
.1.3.6.1.4.1.9.9.132.1.1.1.1.5 |
||||||||||||||||||||||||||||||||||||
|
cds3TraceToExpect
G.832 Trail Trace string that is expected to be received from
the other end. |
OctetStringr/w Constraints: range: 1-16 |
.1.3.6.1.4.1.9.9.132.1.1.1.1.6 |
||||||||||||||||||||||||||||||||||||
|
cds3TraceAlarm
The value of this object is set to traceFailure(2) when
DS3 line receives a trace does not match the 'cds3TraceToExpect'. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.9.132.1.1.1.1.7 |
||||||||||||||||||||||||||||||||||||
|
cds3InternalEqualizer
This variable indicates whether the internal equalizer is being
used or bypassed. Set this value depending on the line equipment to which the receiver is attached. Possible values are : use(1) : Use… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.132.1.1.1.1.8 |
||||||||||||||||||||||||||||||||||||
|
cds3NearEndLineLoopbackStatus
Indicates the loopback status of the near end DS1 on this
DS3 when loopback request is indicated. Following table lists the mapping of Bit position to DS1 or DS3 lines and the value. Bit P… |
Unsigned32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.1.1.1.9 |
||||||||||||||||||||||||||||||||||||
|
cds3FarEndLineLoopbackStatus
Indicates the loopback status of the far end DS3,DS1
when remote DS1 loopback request is initiated. The remote DS1 loopback is initiated by setting dsx3SendCode object to dsx3SendDS1LoopCode(5). For unchannelized DS3 … |
Unsigned32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.1.1.1.10 |
cds3AlarmConfigTable
table.1.3.6.1.4.1.9.9.132.1.2.1.1
·
1 row entry
·
30 columns
The DS3 interface alarm configuration table. This table contains the parameters associated with detecting and declaring alarms for the interface. The parameters include severity of alarm, alarm integration parameters and 15 minute and 24 hour thresholds.
An entry in the T3/E3 Alarm Configuration Table.
The entries are automatically created for an ifType value of
'ds3'(30), with default values for objects. Thresholds may be
configured for:
Line Code Violations(LCV)…
The entries are automatically created for an ifType value of
'ds3'(30), with default values for objects. Thresholds may be
configured for:
Line Code Violations(LCV)…
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
cds3NEAlarmUpCount
This parameter specifies the increment to the Near End alarm
integration counters. The local alarms are LOS and LOF. The Default value is 6 and the integration counter is incremented by this value every 10 ms while the … |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.1 |
||||||
|
cds3NEAlarmDownCount
This parameter specifies the decrement to the Near End alarm
integration counters. The alarms are LOS and LOF. The Default value is 1 and the integration counter is decremented by this value every 10 ms while no alarm … |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.2 |
||||||
|
cds3NEAlarmThreshold
The value set in this object determines the value that
the alarm integration counter must reach for an near end alarm to be declared. If the up count is 6, and the threshold 150, an Alarm is integrated in 2.5 seconds. I… |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.3 |
||||||
|
cds3FEAlarmUpCount
This parameter specifies the increment to the Far End alarm
integration counters. The alarms are Remote Alarm Indication (RAI) and Alarm Indication Signal(AIS). The integration counter is incremented by this value ever… |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.4 |
||||||
|
cds3FEAlarmDownCount
This parameter specifies the decrement to the Far End alarm
integration counters. The alarms are Alarm Indication Signal (AIS) and Remote Alarm Indication (RAI). The integration counter is decremented by this val… |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.5 |
||||||
|
cds3FEAlarmThreshold
The value set in this object determines the value that
the alarm integration counter must reach for an far end Alarm to be declared. If the up count is 6, the down count is 1 and the threshold 150, an Alarm is integrate… |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.6 |
||||||
|
cds3StatisticalAlarmSeverity
This variable is used to setup the severity of any of the
Statistical alarms. So when a Statistical Counter exceeds its specified threshold the system will send the alarm with appropriate severity. A value of none(3) i… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.7 |
||||||
|
cds3LCV15MinThreshold
The value set in this object determines the value
which when exceeded in a 15 minute window causes a statistical alarm to be declared. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.8 |
||||||
|
cds3LCV24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.9 |
||||||
|
cds3LES15MinThreshold
The value set in this object determines the value
which when exceeded in a 15 minute window causes which when exceeded in a 15 minute window causes a statistical alarm to be declared. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.10 |
||||||
|
cds3LES24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.11 |
||||||
|
cds3PCV15MinThreshold
The value set in this object determines the value which when
exceeded in a 15 minute window causes a statistical alarm to be declared. Not for E3. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.12 |
||||||
|
cds3PCV24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval. … |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.13 |
||||||
|
cds3PES15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared. Not for E3. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.14 |
||||||
|
cds3PES24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval. … |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.15 |
||||||
|
cds3PSES15MinThreshold
The value set in this object determines the value
which when exceeded in a 15 minute window causes a statistical alarm to be declared. Not for E3. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.16 |
||||||
|
cds3PSES24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval. … |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.17 |
||||||
|
cds3SEFS15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.18 |
||||||
|
cds3SEFS24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.19 |
||||||
|
cds3UAS15MinThreshold
The value set in this object determines the value which when
exceeded in a 15 minute window causes a statistical alarm to be declared. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.20 |
||||||
|
cds3UAS24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.21 |
||||||
|
cds3CCV15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared. Not for E3. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.22 |
||||||
|
cds3CCV24HrThreshold
The value set in this object determines the value which when exceeded
in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval.… |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.23 |
||||||
|
cds3CES15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared. Not for E3. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.24 |
||||||
|
cds3CES24HrThreshold
The value set in this object determines the value which when exceeded
in a sliding 24 hour window causes a statistical alarm to be declared. Not for E3. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.25 |
||||||
|
cds3CSES15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared. Not for E3. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.26 |
||||||
|
cds3CSES24HrThreshold
The value set in this object determines the value which when
exceeded in a sliding 24 hour window causes a statistical alarm to be declared. Not for E3. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.27 |
||||||
|
cds3LSES15MinThreshold
Used to set the 15 minute threshold for LSES(Line Severely Errored
Seconds). The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be d… |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.28 |
||||||
|
cds3LSES24HrThreshold
The value set in this object determines the value which when
exceeded in a sliding 24 hour window causes a statistical alarm to be declared. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.29 |
||||||
|
cds3LineStatisticalAlarmState
This is a bitmap of the DS3 Line Statistical alarms. It is
represented as a sum where value 2^(N-1) is added to the sum if threshold corresponding to bit N is exceeded. Zero indicates no alarms. Itemize… |
Unsigned32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.1.1.30 |
cds3AlarmConfigPlcpTable
table.1.3.6.1.4.1.9.9.132.1.2.1.2
·
1 row entry
·
11 columns
The ATM interface PLCP alarm configuration table. PLCP is a sublayer over the DS3 interface, that carries ATM cells.
An entry in the DS3 PLCP Alarm Configuration table. The entries
contain parameters to configure DS3 PLCP error statistics
thresholds, so that an alarm is raised whenever any threshold
is exceeded. The entries are autom…
contain parameters to configure DS3 PLCP error statistics
thresholds, so that an alarm is raised whenever any threshold
is exceeded. The entries are autom…
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
cds3PlcpStatisticalAlarmSeverity
This variable sets up the severity of PLCP Statistical
alarm. So when PLCP Statistical alarm is detected the module will send the alarm with appropriate severity. A value of none(3) indicates that no alarm will be raise… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.132.1.2.1.2.1.1 |
||||||
|
cds3PlcpBip8CV15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.2.1.2 |
||||||
|
cds3PlcpBip8CV24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.2.1.3 |
||||||
|
cds3PlcpBip8ES15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.2.1.4 |
||||||
|
cds3PlcpBip8ES24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.2.1.5 |
||||||
|
cds3PlcpBip8SES15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.2.1.6 |
||||||
|
cds3PlcpBip8SES24HrThreshold
The value set in this object determines the value which when exceeded
in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.2.1.7 |
||||||
|
cds3PlcpSEFS15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.2.1.8 |
||||||
|
cds3PlcpSEFS24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.2.1.9 |
||||||
|
cds3PlcpUAS15MinThreshold
The value set in this object determines the value which when
exceeded in a 15 minute window causes a statistical alarm to be declared. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.2.1.10 |
||||||
|
cds3PlcpUAS24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.132.1.2.1.2.1.11 |
cds3AlarmPlcpTable
table.1.3.6.1.4.1.9.9.132.1.2.2
·
1 row entry
·
12 columns
The Plcp interface alarm table. This table maintains the CV,ES,SES, SEFS and UAS for DS3 line with Plcp framing selected. Please refer to RFC2496 for description of these various error statistics.
An entry in the DS3 Plcp Alarm table. Bucket statistics(15 minute
and 24 hour interval statistics) are gathered for each existing DS3
line with PLCP frame format selected. An entry is created
automatically and is indexe…
and 24 hour interval statistics) are gathered for each existing DS3
line with PLCP frame format selected. An entry is created
automatically and is indexe…
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
cds3PlcpLineAlarmState
This variable is a bitmap of the DS3 Line ALarms.
It is represented as sum where value 2^(N-1) is added to the sum if alarm corresponding to bit N is exceeded. A value of zero for this object indicates no alarms. … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.2.2.1.1 |
|
cds3PlcpLineStatisticalAlarmState
This variable is a bitmap of the DS3 Plcp Line Statictical
Alarms. It is represented as a sum, where value 2^(N-1) is added to the sum if threshold corresponding to bit N is exceeded. A value of zero for this object ind… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.2.2.1.2 |
|
cds3PlcpBip8CVCurrent
The number of BIP-8 code violations (CV) encountered by
the line in the current 15 minute period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.2.2.1.3 |
|
cds3PlcpBip8CV24HrBucket
The number of BIP-8 CVs encountered by the line in the last 24
hours. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.2.2.1.4 |
|
cds3PlcpBip8ESCurrent
The number of BIP-8 Errored Seconds(ES) encountered by the line
in the current 15 minute period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.2.2.1.5 |
|
cds3PlcpBip8ES24HrBucket
The number of BIP-8 ES encountered by the line in the last 24 hour.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.2.2.1.6 |
|
cds3PlcpBip8SESCurrent
The number of BIP-8 Severely Errored Seconds(ES) encountered by the
line in the current 15 minute period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.2.2.1.7 |
|
cds3PlcpBip8SES24HrBucket
The number of BIP-8 SES encountered by the line in the last 24 hour.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.2.2.1.8 |
|
cds3PlcpSEFSCurrent
The number of BIP-8 Severely Errored Framing Seconds(SEFS)
encountered by the line in the current 15-minute period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.2.2.1.9 |
|
cds3PlcpSEFS24HrBucket
The number of BIP-8 SEFS encountered by the line in the last 24 hour.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.2.2.1.10 |
|
cds3PlcpUASCurrent
The number of Unavailable Seconds(UAS) encountered by the line
in the current 15-minute period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.2.2.1.11 |
|
cds3PlcpUAS24HrBucket
The number of BIP-8 UAS encountered by the line in the last 24 hour.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.2.2.1.12 |
cds3StatsTable
table.1.3.6.1.4.1.9.9.132.1.3.1
·
1 row entry
·
11 columns
T3/E3 Statistics table. This table maintains the number of times the line encountered Loss of Signal(LOS), out of frame(LOF), Alarm Indication signals(AIS), Remote alarm indications(RAI), C-bit coding violations(CCV), Framing Errors(FE), from the time it is up. Line fails and goes down as a result of failures. When the line is brought back up again by the user the error statistics are cleared.
An entry in the T3/E3 Statistics table. Statistics
are gathered for each existing T3/E3 line. An entry is created
automatically for each T3/E3 line that is activated.
are gathered for each existing T3/E3 line. An entry is created
automatically for each T3/E3 line that is activated.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
cds3RcvLOSCount
The number of times Loss of Signal was detected
with or without integrating to LOS alarm. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.1.1.1 |
|
cds3RcvOOFCount
The number of times Out of Frame was detected with or without
integrating to OOF alarm. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.1.1.2 |
|
cds3RAICount
The number of timesRemote Alarm Indication was detected with
or without integrating to RAI alarm. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.1.1.3 |
|
cds3CCVCount
The counter associated with the number of C-Bit Coding
Violations encountered by a T3/E3 interface. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.1.1.4 |
|
cds3FECount
The number of Framing Errors encountered by a T3/E3 interface.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.1.1.5 |
|
cds3EXZSCount
The number of Excessive Zeros(EXZ) by a T3/E3 interface.
An EXZ is the occurrence of any string of zeros having length equal to or greater than 3 for B3ZS, or any string of zeros having length greater than 4 for HDB3. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.1.1.6 |
|
cds3LCVCount
The count of both BPVs(Bipolar Violations) and EXZs(Excessive
Zeros) encountered by a T3/E3 interface.An EXZ increments the LCV by one regardless of the length of the zero string. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.1.1.7 |
|
cds3PCVCount
This is the count of P-bit Coding Violation(PCV) error event
encountered by DS3 interface. For all DS3 applications, a coding violation error event is a P-bit Parity Error(PERR) event. The parity errors occur when the… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.1.1.8 |
|
cds3CPECount
The number of C-bit parity errors(CPERR) on a DS3 interface.
This value is calculated over noninformation bits in the DS3 frame. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.1.1.9 |
|
cds3FEBECount
The number of Far End Block Errors(FEBE) encountered by
a T3/E3 interface.These include frame alignment errors, multiframe alignment errors, and C-bit parity errors. These errors are generated by the transmitter at the … |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.1.1.10 |
|
cds3RcvAISCount
The number of times Alarm Indication Signals(AIS) were detected.
The AIS indicates that an upstream failure has been detected by the far end. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.1.1.11 |
cds3PlcpStatsTable
table.1.3.6.1.4.1.9.9.132.1.3.2
·
1 row entry
·
9 columns
T3 Plcp Statistics table. This table maintains the errors encountered by the T3 line with Plcp frame format selected, from the time the line is up.Line fails and goes down as a result of failures. When the line is brought back up again by the user after eliminating the error conditions, the statistics are cleared.
An entry in the T3 Plcp Stats table. Statistics are gathered for
each existing T3 line with PLCP frame format selected. An entry is
created automatically and is indexed by the T3 line number.
each existing T3 line with PLCP frame format selected. An entry is
created automatically and is indexed by the T3 line number.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
cds3PlcpRcvBip8Count
The number of of BIP-8 errors encountered by the line.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.2.1.1 |
|
cds3PlcpRcvOOFCount
The number of times Out of Frame(OOF) was detected
with or without integrating to OOF alarm. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.2.1.2 |
|
cds3PlcpRcvRAICount
The number of times Remote Alarm Indication(RAI) was detected
with or without integrating to RAI alarm. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.2.1.3 |
|
cds3PlcpFECount
The number of Framing Errors detected.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.2.1.4 |
|
cds3PlcpFESecCount
The number of Framing Error errored seconds.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.2.1.5 |
|
cds3PlcpSEFSecCount
The number of Severely errored Framing error seconds.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.2.1.6 |
|
cds3PlcpFEBECount
The count of Far End Block Errors (FEBE) detected.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.2.1.7 |
|
cds3PlcpFEBESecCount
The number of FEBE errored seconds.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.2.1.8 |
|
cds3PlcpSEFEBESecCount
The number of Severely errored FEBE seconds.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.2.1.9 |
cds3IntervalTable
table.1.3.6.1.4.1.9.9.132.1.3.4
·
1 row entry
·
2 columns
The DS3 interface interval table.
An entry in the T3/E3 current interval table.
Indexes
IF-MIBifIndex cds3IntervalNumber
| Column | Syntax | OID |
|---|---|---|
|
cds3IntervalNumber
A number between 0 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the 15 minute interval completed 23 hours and 45 minutes prior to interval number 1. Interval number 0 refers to the current… |
Integer32 Constraints: range: 0-96 |
.1.3.6.1.4.1.9.9.132.1.3.4.1.1 |
|
cds3IntervalLSESs
The number of LSESs encountered by the line
in 15 minute interval. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.4.1.2 |
cds3Current24HrTable
table.1.3.6.1.4.1.9.9.132.1.3.5
·
1 row entry
·
11 columns
The DS3 interface current 24 hour table. This table contains counters for current 24 hour interval. Threshold on this counters are configured through cds3AlarmConfigTable table. 24 hour interval is aligned to wall clock.
An entry in the T3/E3 current 24 hour counter table.
The entries are automatically created for an ifType value of
'ds3'(30), when interface is made active.
The entries are automatically created for an ifType value of
'ds3'(30), when interface is made active.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
cds3LCVCurrent24Hr
The number of LCVs encountered by the line since
the start of current 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.5.1.1 |
|
cds3LESCurrent24Hr
The number LESs encountered by the line since
the start of current 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.5.1.2 |
|
cds3PCVCurrent24Hr
The number PCVs encountered by the line since
the start of current 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.5.1.3 |
|
cds3PESCurrent24Hr
The number of PESs encountered by the line since
the start of current 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.5.1.4 |
|
cds3PSESCurrent24Hr
The number of PSESs encountered by the line since
the start of current 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.5.1.5 |
|
cds3SEFSCurrent24Hr
The number of SEFSs encountered by the line since
the start of the current 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.5.1.6 |
|
cds3UASCurrent24Hr
The number of UASs encountered by the line since
the start of current 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.5.1.7 |
|
cds3CCVCurrent24Hr
The number CCVs encounterd by the line since the start
of current 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.5.1.8 |
|
cds3CESCurrent24Hr
The number of CESs encountered by the line since the
start of current 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.5.1.9 |
|
cds3CSESCurrent24Hr
The number of CSESs encountered by the line since th
start of current 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.5.1.10 |
|
cds3LSESCurrent24Hr
The number of LSESs (Line severedly errored seconds)
encountered by the line since the start of current 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.5.1.11 |
cds3Previous24HrTable
table.1.3.6.1.4.1.9.9.132.1.3.6
·
1 row entry
·
11 columns
The DS3 interface previous 24 hour table. This table contains counters for previous 24 hour interval. Implementation of this table is optional.
An entry in the T3/E3 current 24 hour counter table.
The entries are automatically created for an ifType value of
ds3(30), when interface is made active.
The entries are automatically created for an ifType value of
ds3(30), when interface is made active.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
cds3LCVPrevious24Hr
The number of LCVs encountered by the line in
the previous 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.6.1.1 |
|
cds3LESPrevious24Hr
The number LESs encountered by the line in
the previous 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.6.1.2 |
|
cds3PCVPrevious24Hr
The number PCVs encountered by the line in
the previous 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.6.1.3 |
|
cds3PESPrevious24Hr
The number of PESs encountered by the line in
the previous 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.6.1.4 |
|
cds3PSESPrevious24Hr
The number of PSESs encountered by the line in
the previous 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.6.1.5 |
|
cds3SEFSPrevious24Hr
The number of SEFSs encountered by the line in
the start of the current 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.6.1.6 |
|
cds3UASPrevious24Hr
The number of UASs encountered by the line in
the previous 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.6.1.7 |
|
cds3CCVPrevious24Hr
The number CCVs encounterd by the line in the
previous 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.6.1.8 |
|
cds3CESPrevious24Hr
The number of CESs encountered by the line in
the previous 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.6.1.9 |
|
cds3CSESPrevious24Hr
The number of CSESs encountered by the line in
the previous 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.6.1.10 |
|
cds3LSESPrevious24Hr
The number of LSESs encountered by the line in
the previous 24 hour period. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.132.1.3.6.1.11 |