cds3FEBECount

CISCO-DS3-MIB · .1.3.6.1.4.1.9.9.132.1.3.1.1.10
MIB view Table view

Object

column SNMPv2-SMICounter32 
The number of Far End Block Errors(FEBE) encountered by
a T3/E3 interface.These include frame alignment errors,
multiframe alignment errors, and C-bit parity errors.
These errors are generated by the transmitter at the 
far end, and indicate that the transmitter,cabling or the
upstream node is faulty.

Context

MIB
CISCO-DS3-MIB
OID
.1.3.6.1.4.1.9.9.132.1.3.1.1.10
Type
column
Access
readonly
Status
current
Parent
cds3StatsEntry
Table
cds3StatsTable
Siblings
10

Syntax

SNMPv2-SMICounter32
Source
SNMPv2-SMICounter32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cds3RcvLOSCount
The number of times Loss of Signal was detected with or without integrating to LOS alarm.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.1
cds3RcvAISCount
The number of times Alarm Indication Signals(AIS) were detected. The AIS indicates that an upstream failure has been detected by the far end.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.11
cds3RcvOOFCount
The number of times Out of Frame was detected with or without integrating to OOF alarm.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.2
cds3RAICount
The number of timesRemote Alarm Indication was detected with or without integrating to RAI alarm.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.3
cds3CCVCount
The counter associated with the number of C-Bit Coding Violations encountered by a T3/E3 interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.4
cds3FECount
The number of Framing Errors encountered by a T3/E3 interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.5
cds3EXZSCount
The number of Excessive Zeros(EXZ) by a T3/E3 interface. An EXZ is the occurrence of any string of zeros having length equal to or greater than 3 for B3ZS, or any string of zeros …
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.6
cds3LCVCount
The count of both BPVs(Bipolar Violations) and EXZs(Excessive Zeros) encountered by a T3/E3 interface.An EXZ increments the LCV by one regardless of the length of the zero string.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.7
cds3PCVCount
This is the count of P-bit Coding Violation(PCV) error event encountered by DS3 interface. For all DS3 applications, a coding violation error event is a P-bit Parity Error(PERR) …
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.8
cds3CPECount
The number of C-bit parity errors(CPERR) on a DS3 interface. This value is calculated over noninformation bits in the DS3 frame.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.9