cds3PCVCount

CISCO-DS3-MIB · .1.3.6.1.4.1.9.9.132.1.3.1.1.8
MIB view Table view

Object

column SNMPv2-SMICounter32 
This is the count of P-bit Coding Violation(PCV) error event
encountered by DS3 interface. For all DS3 applications, a 
coding violation error event is a P-bit Parity Error(PERR) event. 
The parity errors occur when the calculated parity in the 
information bits of the DS3 frame does not match up with an 
expected parity value.

Context

MIB
CISCO-DS3-MIB
OID
.1.3.6.1.4.1.9.9.132.1.3.1.1.8
Type
column
Access
readonly
Status
current
Parent
cds3StatsEntry
Table
cds3StatsTable
Siblings
10

Syntax

SNMPv2-SMICounter32
Source
SNMPv2-SMICounter32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cds3RcvLOSCount
The number of times Loss of Signal was detected with or without integrating to LOS alarm.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.1
cds3FEBECount
The number of Far End Block Errors(FEBE) encountered by a T3/E3 interface.These include frame alignment errors, multiframe alignment errors, and C-bit parity errors. These errors …
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.10
cds3RcvAISCount
The number of times Alarm Indication Signals(AIS) were detected. The AIS indicates that an upstream failure has been detected by the far end.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.11
cds3RcvOOFCount
The number of times Out of Frame was detected with or without integrating to OOF alarm.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.2
cds3RAICount
The number of timesRemote Alarm Indication was detected with or without integrating to RAI alarm.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.3
cds3CCVCount
The counter associated with the number of C-Bit Coding Violations encountered by a T3/E3 interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.4
cds3FECount
The number of Framing Errors encountered by a T3/E3 interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.5
cds3EXZSCount
The number of Excessive Zeros(EXZ) by a T3/E3 interface. An EXZ is the occurrence of any string of zeros having length equal to or greater than 3 for B3ZS, or any string of zeros …
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.6
cds3LCVCount
The count of both BPVs(Bipolar Violations) and EXZs(Excessive Zeros) encountered by a T3/E3 interface.An EXZ increments the LCV by one regardless of the length of the zero string.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.7
cds3CPECount
The number of C-bit parity errors(CPERR) on a DS3 interface. This value is calculated over noninformation bits in the DS3 frame.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.132.1.3.1.1.9