cds3CPECount
CISCO-DS3-MIB ·
.1.3.6.1.4.1.9.9.132.1.3.1.1.9
Object
column
SNMPv2-SMICounter32
The number of C-bit parity errors(CPERR) on a DS3 interface. This value is calculated over noninformation bits in the DS3 frame.
Context
- MIB
- CISCO-DS3-MIB
- OID
.1.3.6.1.4.1.9.9.132.1.3.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cds3StatsEntry
- Table
- cds3StatsTable
- Siblings
- 10
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cds3RcvLOSCount The number of times Loss of Signal was detected
with or without integrating to LOS alarm. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.132.1.3.1.1.1 |
| cds3FEBECount The number of Far End Block Errors(FEBE) encountered by
a T3/E3 interface.These include frame alignment errors,
multiframe alignment errors, and C-bit parity errors.
These errors … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.132.1.3.1.1.10 |
| cds3RcvAISCount The number of times Alarm Indication Signals(AIS) were detected.
The AIS indicates that an upstream failure has been detected by
the far end. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.132.1.3.1.1.11 |
| cds3RcvOOFCount The number of times Out of Frame was detected with or without
integrating to OOF alarm. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.132.1.3.1.1.2 |
| cds3RAICount The number of timesRemote Alarm Indication was detected with
or without integrating to RAI alarm. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.132.1.3.1.1.3 |
| cds3CCVCount The counter associated with the number of C-Bit Coding
Violations encountered by a T3/E3 interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.132.1.3.1.1.4 |
| cds3FECount The number of Framing Errors encountered by a T3/E3 interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.132.1.3.1.1.5 |
| cds3EXZSCount The number of Excessive Zeros(EXZ) by a T3/E3 interface.
An EXZ is the occurrence of any string of zeros having length
equal to or greater than 3 for B3ZS, or any string of zeros
… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.132.1.3.1.1.6 |
| cds3LCVCount The count of both BPVs(Bipolar Violations) and EXZs(Excessive
Zeros) encountered by a T3/E3 interface.An EXZ increments
the LCV by one regardless of the length of the zero string. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.132.1.3.1.1.7 |
| cds3PCVCount This is the count of P-bit Coding Violation(PCV) error event
encountered by DS3 interface. For all DS3 applications, a
coding violation error event is a P-bit Parity Error(PERR) … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.132.1.3.1.1.8 |