CISCO-APS-EXT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
5
Rows
5
Columns
22
cApsConfigExtTable
table.1.3.6.1.4.1.9.10.72.1.2
·
1 row entry
·
12 columns
This table augments the cApsConfigTable.
A conceptual row in the cApsConfigExtTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
cApsConfigSpan
The span (hopByHop or endToEnd) for the APS group.
hopByHop This refers to linear APS, e.g. linear SONET APS, or hopByHop CDL APS. In a DWDM system, an APS channel may be associated with ei… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.10.72.1.2.1.1 |
||||||||||||||
|
cApsConfigYcable
The Y-cable configuration for the APS group associated with
user channels. noYcable The APS channels in the APS group are not connected to an external Y-cable. ycable … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.10.72.1.2.1.2 |
||||||||||||||
|
cApsConfigMinSearchUpInterval
This object is instantiated only when the standby interface
is not monitored. If both interfaces go down and the standby interface is not monitored, successive switchovers may be used in order to search for an interface… |
Integer32r/w Constraints: range: 1-120 |
.1.3.6.1.4.1.9.10.72.1.2.1.3 |
||||||||||||||
|
cApsConfigMaxSearchUpInterval
This object is instantiated only when the standby interface
is not monitored. If both interfaces go down and the standby interface is not monitored, successive switchovers may be used in order to search for an interface… |
secondsInteger32r/w Constraints: range: 1-120 |
.1.3.6.1.4.1.9.10.72.1.2.1.4 |
||||||||||||||
|
cApsConfigSwitchoverEnableInterval
This object specifies the value of the timer to control
the minimum interval between switchovers. After a switchover, APS is re-enabled only after this amount of time has elapsed, in order to prevent quick successive sw… |
secondsInteger32r/w Constraints: range: 1-120 |
.1.3.6.1.4.1.9.10.72.1.2.1.5 |
||||||||||||||
|
cApsConfigMessageTransport
This object specifies the type of transport configured for
exchange of APS protocol messages. The type of transport currently being used is indicated in the cApsStatusMessageTransport object. When this o… |
CApsMessageTransportr/w Textual Convention: CApsMessageTransport EnumerationType Values:
|
.1.3.6.1.4.1.9.10.72.1.2.1.6 |
||||||||||||||
|
cApsConfigMessageHolddown
The value specified in this object applies when the value of
cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'. APS messages are exchanged between systems to support bidirectional or linear operation. T… |
millisecondsInteger32r/w Constraints: range: 100-10000 |
.1.3.6.1.4.1.9.10.72.1.2.1.7 |
||||||||||||||
|
cApsConfigMessageHolddownCount
The value specified in this object applies when the value of
cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'. The maximum number of APS messages that can be sent within one cApsConfigMessageHolddown … |
Integer32r/w Constraints: range: 2-10 |
.1.3.6.1.4.1.9.10.72.1.2.1.8 |
||||||||||||||
|
cApsConfigMessageMaxInterval
The value specified in this object applies when the value of
cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'. An APS message is sent unconditionally, whenever the amount of time specified by this obje… |
millisecondsInteger32r/w Constraints: range: 1000-120000 |
.1.3.6.1.4.1.9.10.72.1.2.1.9 |
||||||||||||||
|
cApsConfigFarEndGroupName
The value specified in this object applies when the value of
cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'. APS messages, used to support bidirectional or linear operation, can be sent out-of-band… |
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.9.10.72.1.2.1.10 |
||||||||||||||
|
cApsConfigFarEndIpAddressType
This object can be set only when the value of
cApsConfigMessageTransport is 'ip'. This object specifies the type of IP address defined in cApsConfigFarEndIpAddress. |
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.9.10.72.1.2.1.11 |
||||||||||||||
|
cApsConfigFarEndIpAddress
This object can be set only when the value of
cApsConfigMessageTransport is 'ip'. This object specifies the IP address of the far end, which is used as the destination address in APS messages transmitted … |
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.9.10.72.1.2.1.12 |
cApsStatusExtTable
table.1.3.6.1.4.1.9.10.72.1.3
·
1 row entry
·
3 columns
This table augments the cApsStatusTable.
A conceptual row in the cApsStatusExtTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
cApsStatusCdlApsBytesRcv
The current value of the APS bytes received on the
protection channel. This object applies only to CDL interfaces. This is equivalent to cApsStatusK1K2Rcv for SONET. |
CdlApsBytes Textual Convention: CdlApsBytes OctetStringType Constraints: range: 2 |
.1.3.6.1.4.1.9.10.72.1.3.1.1 |
||||||||||||
|
cApsStatusCdlApsBytesTrans
The current value of the APS bytes transmitted on the
protection channel. This object applies only to CDL interfaces. This is equivalent to cApsStatusK1K2Trans for SONET. |
CdlApsBytes Textual Convention: CdlApsBytes OctetStringType Constraints: range: 2 |
.1.3.6.1.4.1.9.10.72.1.3.1.2 |
||||||||||||
|
cApsStatusMessageTransport
This object specifies the type of transport currently being used
for exchange of APS protocol messages. The value of this object is the same as the value specified in the cApsConfigMessageTransport object… |
CApsMessageTransport Textual Convention: CApsMessageTransport EnumerationType Values:
|
.1.3.6.1.4.1.9.10.72.1.3.1.3 |
cApsChanStatusExtTable
table.1.3.6.1.4.1.9.10.72.1.4
·
1 row entry
·
1 columns
This table augments the cApsChanStatusTable.
A conceptual row in the cApsChanStatusExtTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
cApsChanStatusExtRequest
The highest priority local request for a channel in an APS
group. This object uses only the 'Type of Request' part (bits 1-4) of the K1 byte. |
CISCO-APS-MIBCApsK1K2 Textual Convention: CISCO-APS-MIBCApsK1K2 OctetStringType Constraints: range: 2 |
.1.3.6.1.4.1.9.10.72.1.4.1.1 |
cApsChanConfigExtTable
table.1.3.6.1.4.1.9.10.72.1.5
·
1 row entry
·
1 columns
This table augments the cApsChanConfigTable.
A conceptual row in the cApsChanConfigExtTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
cApsChanConfigReflectorMode
Indicates whether the channel is in reflector mode or not.
Reflector mode establishes a communication channel between the local PTE and the remote PTE at the other end of the SONET path. This object has a value of true(… |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.9.10.72.1.5.1.1 |
cApsChanAssociationTable
table.1.3.6.1.4.1.9.10.72.1.6
·
1 row entry
·
5 columns
This table lists the configured IP address of the protect/working interfaces.
A conceptual row in cApsChanAssociationTable.
Indexes
cApsChanAssociationGroupName cApsChanAssociationNumber cApsChanAssociationMapNumber
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
cApsChanAssociationGroupName
A textual name for the APS group which this channel is
included in. |
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.9.10.72.1.6.1.1 |
||||||||||||||
|
cApsChanAssociationNumber
This field is set to a unique working/protection channel
number within an APS group. The value 0 indicates the null channel. The values 1-14 define a working channel. |
CApsChannelConfigNumber Textual Convention: CApsChannelConfigNumber Integer32Type Constraints: range: 0..14 |
.1.3.6.1.4.1.9.10.72.1.6.1.2 |
||||||||||||||
|
cApsChanAssociationMapNumber
This field is set to the associated working/protection
channel number corresponding to the field cApsChanAssociationNumber within an APS group. The value 0 indicates the null channel. The values 1-14 define a workin… |
CApsChannelConfigNumber Textual Convention: CApsChannelConfigNumber Integer32Type Constraints: range: 0..14 |
.1.3.6.1.4.1.9.10.72.1.6.1.3 |
||||||||||||||
|
cApsChanAssociationIpAddressType
This object specifies the type of IP address defined
in cApsChanAssociationIpAddress. |
INET-ADDRESS-MIBInetAddressType Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.9.10.72.1.6.1.4 |
||||||||||||||
|
cApsChanAssociationIpAddress
IP Address of the working/protection channel.
If cApsChanAssociationNumber represents a working channel number, this object indicates the IP Address of the associated protection channel. If cApsChanAssociationNumber r… |
INET-ADDRESS-MIBInetAddress Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.9.10.72.1.6.1.5 |