ARICENT-LA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
112

fsLaPortChannelTable

table
.1.3.6.1.4.1.2076.63.2.1 · 1 row entry · 43 columns
Open in standard view 
A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table. 
This Port-channel table is indexed through Key values and allows to 
configure link selection policy and the Mac address for 
the port-channel. All other objects in this table displays 
the details of the port-channel.
fsLaPortChannelEntry entry .1.3.6.1.4.1.2076.63.2.1.1
There is one entry in this table for each created
port-channel port.
Indexes
fsLaPortChannelIfIndex
Column Syntax OID
fsLaPortChannelIfIndex
The ifIndex of the port-channel(Aggregator's
interface index).
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2076.63.2.1.1.1
fsLaPortChannelGroup
An index that uniquely identifies an entry in this table.
IEEE8023-LAG-MIBLacpKey
Textual Convention: IEEE8023-LAG-MIBLacpKey Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2076.63.2.1.1.2
fsLaPortChannelAdminMacAddress deprecated
This object is used for configuring MacAddress that is
to be used by the port-channel when fsLaPortChannelMacSelection
is force.
WARNING: The value configured should not conflict
with the MAC address of system ports th…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2076.63.2.1.1.3
fsLaPortChannelMacSelection deprecated
Indicates the MAC address selection method for
for the port-channel.
Dynamic - System will reserve certain MAC address
for aggregators. These MAC address are
derived from BaseMac. If this object is
…
Enumerationr/w
Enumerated Values:
1dynamic
2force
 .1.3.6.1.4.1.2076.63.2.1.1.4
fsLaPortChannelMode
Current Operating Channel Mode of the port
Lacp(1) - forcing the port to negotiate with the
partner.
manual(2) - force the port to enable channeling (Manual).
disable(3) - channeling is disabled.
PortLaMode
Textual Convention: PortLaMode Enumeration
Type Values:
1lacp
2manual
3disable
 .1.3.6.1.4.1.2076.63.2.1.1.5
fsLaPortChannelPortCount
The number of ports actually configured to the port-channel.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.63.2.1.1.6
fsLaPortChannelActivePortCount
This object will give the number of ports that are attached to the
port-channel and actively carrying data traffic on the link.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.63.2.1.1.7
fsLaPortChannelSelectionPolicy
Link selection policy to be used by the port-channel.
Selection policy ISID implies selection based on Service-instance
and is applicable only in provider Backbone bridge.
Enumerationr/w
Enumerated Values:
1macSrc
2macDst
3macSrcDst
4ipSrc
5ipDst
6ipSrcDst
7vlanId
8isid
9macSrcVid
10macDstVid
11macSrcDstVid
12mplsVcLabel
13mplsTunnelLabel
14mplsVcTunnelLabel
15enhanced
16randomized
 .1.3.6.1.4.1.2076.63.2.1.1.8
fsLaPortChannelDefaultPortIndex
The ifIndex of the default port that gets attached to the
aggregator. A value of 0 means there is no default port for
this port-channel.
If this object is set to 0, it will remove the current default
port from the aggr…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2076.63.2.1.1.9
fsLaPortChannelMaxPorts
This object specifies the maximum number of
ports that can attach to a port-channel.
Integer32r/w
Constraints:
range: 2-8
 .1.3.6.1.4.1.2076.63.2.1.1.10
fsLaPortChannelSelectionPolicyBitList
This object is used to set the link selection policy to be
used by the port-channel.
A four byte integer is used for setting the selecting policy.
Each bit in the four byte integer represents a particular
selection poli…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.63.2.1.1.11
fsLaPortChannelDLAGDistributingPortIndex
This object is used to configure the distributing
port on which D-LAG periodic-sync and
D-LAG event-update messages will be sent/received
for D-LAG internal communication between the D-LAG
nodes.

Ports wh…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2076.63.2.1.1.12
fsLaPortChannelDLAGSystemID
This object is used to configure the common system ID in
D-LAG nodes to be used for communicating with the peer node
when D-LAG status is enabled.

Since all the D-LAG nodes use this common D-LAG system ID…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2076.63.2.1.1.13
fsLaPortChannelDLAGSystemPriority
This object is used for configuring common system priority in
D-LAG nodes to be used for communicating with the peer node when
D-LAG status is enabled.

Since all the D-LAG nodes use this common D-LAG syst…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.63.2.1.1.14
fsLaPortChannelDLAGPeriodicSyncTime
This object is used to configure the D-LAG periodic sync timer
used in distributed link aggregation.
Periodic sync timer is used to configure the transmission
interval of D-LAG periodic-sync PDUs. Periodic-sync timer
wi…
millisecondsUnsigned32r/w
Constraints:
range: 0-90000
 .1.3.6.1.4.1.2076.63.2.1.1.15
fsLaPortChannelDLAGMSSelectionWaitTime
This object is used to configure the period for the
master slave selection wait timer used in distributed
link aggregation.

This object is applicable, only if D-LAG status
and D-LAG redundancy feature i…
millisecondsUnsigned32r/w
Constraints:
range: 0-90000
 .1.3.6.1.4.1.2076.63.2.1.1.16
fsLaPortChannelDLAGRolePlayed
This object is used to hold the current role played by the device
participating in distributed LAG.

This object is applicable, only if D-LAG status and D-LAG
redundancy feature is enabled.

…
Enumeration
Enumerated Values:
0none
1master
2slave
3backupmaster
 .1.3.6.1.4.1.2076.63.2.1.1.17
fsLaPortChannelDLAGStatus
This object is used to enable or disable the D-LAG
functionality.

This object can be modified irrespective of whether
corresponding port-channel is enabled/disabled.

Configuring D-LAG statu…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.63.2.1.1.18
fsLaPortChannelDLAGRedundancy
This object is used to enable/disable the redundancy feature
in D-LAG node.

When D-LAG redundancy feature is enabled, master-slave-selection
algorithm can be used to select master/slave/backup-master.
…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2076.63.2.1.1.19
fsLaPortChannelDLAGMaxKeepAliveCount
This read-only MIB object is used to provide keep alive
mechanism when D-LAG status is enabled.
Each D-LAG node will have a Max Keep alive count and each D-LAG
node maintains separate keep alive counts for all other rem…
Integer32
Constraints:
range: 0-5
 .1.3.6.1.4.1.2076.63.2.1.1.20
fsLaPortChannelDLAGPeriodicSyncPduTxCount
This object is used when distributing feature is enabled in a
node to hold the number of periodic-sync PDUs sent on the
distributing port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.2.1.1.21
fsLaPortChannelDLAGPeriodicSyncPduRxCount
This object is used when distributing feature is enabled in a
node to hold the number of periodic-sync PDUs received on the
distributing port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.2.1.1.22
fsLaPortChannelDLAGEventUpdatePduTxCount
This object is used when distributing feature is enabled in a
node to hold the number of event-update PDUs sent on the
distributing port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.2.1.1.23
fsLaPortChannelDLAGEventUpdatePduRxCount
This object is used when distributing feature is enabled in a
node to hold the number of event-update PDUs received on the
distributing port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.2.1.1.24
fsLaPortChannelDLAGElectedAsMasterCount
This object is used when distributing feature and redundancy
feature both are enabled in a D-LAG node to hold the number of
times the port-channel has been selected as master.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.2.1.1.25
fsLaPortChannelDLAGElectedAsSlaveCount
This object is used when distributing feature and redundancy
feature both are enabled in a D-LAG node to hold the number of
times the port-channel has been selected as slave.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.2.1.1.26
fsLaPortChannelTrapTxCount
The number of trap messages sent from the port-channel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.2.1.1.27
fsLaPortChannelDLAGDistributingPortList
This object is used to configure the distributing
port list on which D-LAG periodic-sync and
D-LAG event-update messages will be sent/received
for D-LAG internal communication between the D-LAG
nodes.

Por…
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.2076.63.2.1.1.28
fsLaPortChannelMCLAGStatus
This object is used to enable or disable the MC-LAG
functionality.

This object can be modified irrespective of whether
corresponding port-channel is enabled/disabled.

Configuring MC-LAG sta…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.63.2.1.1.29
fsLaPortChannelMCLAGSystemID
This object is used to configure the common system ID in
MC-LAG nodes to be used for communicating with the peer node
when MC-LAG status is enabled.

Since all the MC-LAG nodes use this common MC-LAG syste…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2076.63.2.1.1.30
fsLaPortChannelMCLAGSystemPriority
This object is used for configuring common system priority in
MC-LAG nodes to be used for communicating with the peer node when
MC-LAG status is enabled.

Since all the MC-LAG nodes use this common MC-LAG …
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.63.2.1.1.31
fsLaPortChannelMCLAGRolePlayed
This object is used to hold the current role played by the device
participating in MC-LAG.

Role played by device can be
none(0) - Current role played by the device will be set
…
Enumeration
Enumerated Values:
0none
1master
2slave
 .1.3.6.1.4.1.2076.63.2.1.1.32
fsLaPortChannelMCLAGMaxKeepAliveCount
This read-only MIB object is used to provide keep alive
mechanism when MC-LAG status is enabled.
Each MC-LAG node will have a Max Keep alive count and each MC-LAG
node maintains separate keep alive counts for all other …
Integer32
Constraints:
range: 0-5
 .1.3.6.1.4.1.2076.63.2.1.1.33
fsLaPortChannelMCLAGPeriodicSyncPduTxCount
This object is used when MC-LAG feature is enabled in a
node to hold the number of periodic-sync PDUs sent on the
ICCL port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.2.1.1.34
fsLaPortChannelMCLAGPeriodicSyncPduRxCount
This object is used when MC-LAG feature is enabled in a
node to hold the number of periodic-sync PDUs received on the
ICCL port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.2.1.1.35
fsLaPortChannelMCLAGEventUpdatePduTxCount
This object is used when MC-LAG feature is enabled in a
node to hold the number of event-update PDUs sent on the
ICCL port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.2.1.1.36
fsLaPortChannelMCLAGEventUpdatePduRxCount
This object is used when MC-LAG feature is enabled in a
node to hold the number of event-update PDUs received on the
ICCL port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.2.1.1.37
fsLaPortChannelClearStatistics
This object is used to clear the statistics of port channel and its member ports.
When this object is set to TRUE, it will clear the statistics for the
port channel and member ports of that port channel.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.63.2.1.1.38
fsLaPortChannelUpCount
This object specifies the number of times a portchannel
moves to operational up state.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.2.1.1.39
fsLaPortChannelDownCount
This object specifies the number of times a portchannel
moves to operational down state.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.2.1.1.40
fsLaPortChannelHotStandByPortsCount
This object specifies the number of hot standby
ports in this port channel entry.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.2.1.1.41
fsLaPortChannelOperChgTimeStamp
This object specifies the last operational change timestamp
for this port channel.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.2.1.1.42
fsLaPortChannelDownReason
This object specifies the reason when the portchannel
moves to down state.
operDown(1) - The port is operationally down.
adminDown(2) - The port is shutdown by the user.
Enumeration
Enumerated Values:
1operDown
2adminDown
 .1.3.6.1.4.1.2076.63.2.1.1.43

fsLaIfPortChannelTable

table
.1.3.6.1.4.1.2076.63.2.2 · 1 row entry · 13 columns
Open in standard view 
This table contains port-channel attributes that
are used for manipulating entries in various tables.
          
fsLaIfPortChannelTable entry creation, modification 
and deletion results in related actions being 
performed on multiple tables, including ifMainTable, 
fsLaPortChannelTable, faLaPortTable and the 
dot3adAggPortTable. Likewise, data returned through 
fsLaIfPortChannelTable queries is derived from these 
tables.
fsLaIfPortChannelEntry entry .1.3.6.1.4.1.2076.63.2.2.1
Information about a specific port-channel and
related components.
Indexes
fsLaIfPortChannelName
Column Syntax OID
fsLaIfPortChannelName
The port-channel name of the form
'po<Key>', where <Key> is the port-
channel group key.
OctetString
Constraints:
range: 3-7
 .1.3.6.1.4.1.2076.63.2.2.1.1
fsLaIfPortChannelIfIndex
The ifIndex of the port-channel.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2076.63.2.2.1.2
fsLaIfPortChannelGroupKey
Port-channel group key identifier.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2076.63.2.2.1.3
fsLaIfPortChannelOperMode
The operational mode of the port-channel. If
the port-channel has no assigned ports, the mode
is 'disable(4)'.
Enumerationr/w
Enumerated Values:
1manual
2passive
3active
4disable
 .1.3.6.1.4.1.2076.63.2.2.1.4
fsLaIfPortChannelPorts
Text string identifying the port-channel member
ports using the system representation of the port
name. A maximum of 8 comma-separated port names
can be specified, e.g., 'gi0/4,gi0/5,gi0/10'.
OctetStringr/w
Constraints:
range: 5-55
 .1.3.6.1.4.1.2076.63.2.2.1.5
fsLaIfPortChannelAdminStatus
The administrative status for the port-channel.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2076.63.2.2.1.6
fsLaIfPortChannelMtu
The MTU for the port-channel.

When changing the MTU, the port-channel must first
be brought down. Changing MTU while the port-channel
is administratively up is not permitted.

If not specif…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.63.2.2.1.7
fsLaIfPortChannelPvid
The PVID for the port-channel.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2076.63.2.2.1.8
fsLaIfPortChannelPortMode
The port mode for the port-channel.
Enumerationr/w
Enumerated Values:
1access
2trunk
3hybrid
 .1.3.6.1.4.1.2076.63.2.2.1.9
fsLaIfPortChannelStpStatus
The STP status for the port-channel.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.63.2.2.1.10
fsLaIfPortChannelDesc
A textual string which contains a description
for the port-channel interface. Attribute has
the same semantics as the ifMainDesc object.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2076.63.2.2.1.11
fsLaIfPortChannelRowStatus
This object allows entries to be created, modified
and deleted in the fsLaIfPortChannelTable. Values
'createAndWait', 'active' and 'destroy' are supported
for Sets.

The rowStatus value of the underlying…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.63.2.2.1.12
fsLaIfPortChannelUserPriority
The default user priority for the port-channel.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2076.63.2.2.1.13

fsLaPortTable

table
.1.3.6.1.4.1.2076.63.3.1 · 1 row entry · 28 columns
Open in standard view 
A table that contains objects to set the port LACP mode
of dot3adAggPortTable.
fsLaPortEntry entry .1.3.6.1.4.1.2076.63.3.1.1
Each entry in this table is for each physical port that participates
in link aggregation which can be either aggregatable or individual.
This table is indexed by the PortIndex.
Indexes
fsLaPortIndex
Column Syntax OID
fsLaPortIndex
The ifIndex of the port.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2076.63.3.1.1.1
fsLaPortMode
This object is used to enable LACP, disable LACP or manually
aggregate a port.
PortLaModer/w
Textual Convention: PortLaMode Enumeration
Type Values:
1lacp
2manual
3disable
 .1.3.6.1.4.1.2076.63.3.1.1.2
fsLaPortBundleState
This read-only object is used to display the port state in aggregation
upInBndl(0) - The port is operationally up and actively
takes part in aggregation.
standby(1) - The port is capable o…
Enumeration
Enumerated Values:
0upInBndl
1standby
2down
3upIndividual
 .1.3.6.1.4.1.2076.63.3.1.1.3
fsLaPortActorResetAdminState
A string of 8 bits corresponding to the administrative values
of Actor_State as transmitted by the actor in LACPDUs.
The first bit corresponds to bit 0 of Actor_State (LACP_Activity),
the second bit corresponds to bit 1…
LacpStater/w
Textual Convention: LacpState Bits
Type Values:
0lacpActivity
1lacpTimeout
2aggregation
3synchronization
4collecting
5distributing
6defaulted
7expired
 .1.3.6.1.4.1.2076.63.3.1.1.4
fsLaPortAggregateWaitTime
Duration of the port to attach to the PortChannel.
SNMPv2-SMITimeTicksr/w
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.3.1.1.5
fsLaPortPartnerResetAdminState
A string of 8 bits corresponding to the administrative values
of Partner_State. The first bit corresponds to bit 0 of Partner_State
(LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout),
the third …
LacpStater/w
Textual Convention: LacpState Bits
Type Values:
0lacpActivity
1lacpTimeout
2aggregation
3synchronization
4collecting
5distributing
6defaulted
7expired
 .1.3.6.1.4.1.2076.63.3.1.1.6
fsLaPortActorAdminPort
The port number used as dot3adAggPortActorPort and is
communicated in LACPDUs as the Actor_Port.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2076.63.3.1.1.7
fsLaPortRestoreMtu
The Restore MTU stores the original MTU of the port
before getting aggregated to port channel.
A SET on the MIB object is not allowed for SNMP users.
This operation is allowed only during config-save-restore
operation…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.63.3.1.1.8
fsLaPortSelectAggregator
This read-only object is used to display whether the port participates
in dynamic aggregator selection. The default will be static aggregation
selection.
static(0) - The port is involved only in static aggregati…
Enumeration
Enumerated Values:
0static
1dynamic
 .1.3.6.1.4.1.2076.63.3.1.1.9
fsLaPortErrStateDetCount
This object is used to track number of times the port goes to detected state
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.3.1.1.10
fsLaPortErrStateRecCount
This object is used to track number of times the port executes recovery code
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.3.1.1.11
fsLaPortDefaultedStateThreshold
This object is used to track the maximum number of times a port in defaulted state
can undergo error recovery. The value configured for fsLaDefaultedStateThreshold will
override the threshold value configured on the por…
Unsigned32r/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2076.63.3.1.1.12
fsLaPortHardwareFailureRecThreshold
This object is used to track the maximum number of times a port can undergo recovery
after a hardware failure. The value configured for fsLaHardwareFailureRecThreshold will
override the threshold value configured on the…
Unsigned32r/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2076.63.3.1.1.13
fsLaPortSameStateRecThreshold
This object is used to track the maximum number of times a port can undergo recovery
after a hardware failure. The value configured for fsLaSameStateRecThreshold will
override the threshold value configured on the ports.
Unsigned32r/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2076.63.3.1.1.14
fsLaPortUpInBundleCount
This object is used to track the number of times a port goes to
up-in-bundle state.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.3.1.1.15
fsLaPortDownInBundleCount
This object is used to track the number of times a port goes to
down-in-bundle state.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.3.1.1.16
fsLaPortBundStChgTimeStamp
This object specifies the timestamp when a ports bundle
state changes.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.3.1.1.17
fsLaPortDownInBundleReason
This object specifies the reason when a port goes to operationally
down state.
operDown(1) - The port is operationally down
partnerKeyMismatch(2)- partner admin key mismatch
partnerIdMismatch(3) - Partner Id mismatch
…
Enumeration
Enumerated Values:
1operDown
2partnerKeyMismatch
3partnerIdMismatch
4partnerKeyZero
5speedMismatch
6mtuMismatch
7pausemodeMismatch
8portAggregation
9hardwareFailure
10hotStandBy
11noLACPReceived
 .1.3.6.1.4.1.2076.63.3.1.1.18
fsLaPortErrStateDetTimeStamp
This object specifies the timestamp when the port goes
to error detected state.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.3.1.1.19
fsLaPortErrStateRecTimeStamp
This object specifies the timestamp when the port goes
to error triggered state.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.3.1.1.20
fsLaPortRecTrigReason
This object specifies the reason for error recovery:
defaulted(1)- Port goes to defaulted state.
hardwareFailure(2)- Hardware programming fails.
sameState(3)-Port is stuck in same state for longer time.
Enumeration
Enumerated Values:
1defaulted
2hardwareFailure
3sameState
 .1.3.6.1.4.1.2076.63.3.1.1.21
fsLaPortDefStateRecCount
This object indicates the number of times a port undergoes error
recovery due to defaulted state.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.3.1.1.22
fsLaPortSameStateRecCount
This object indicates the number of times a port undergoes error
recovery due to same state.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.3.1.1.23
fsLaPortHwFailRecCount
This object specifies the number of times a port undergoes error
recovery due to hardware failure.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.3.1.1.24
fsLaPortDefStateRecTimeStamp
This object specifies the time when the last recovery is
triggered to overcome from the defaulted state.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.3.1.1.25
fsLaPortSameStateRecTimeStamp
This object specifies the time when the last recovery is
triggered to overcome same state failure.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.3.1.1.26
fsLaPortHwFailRecTimeStamp
This object specifies the time when the last recovery is
triggered to overcome the hardware failure.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.3.1.1.27
fsLaPortRecState
This object indicates the same state in which the port stays
for a threshold before triggering a error recovery.
LacpState
Textual Convention: LacpState Bits
Type Values:
0lacpActivity
1lacpTimeout
2aggregation
3synchronization
4collecting
5distributing
6defaulted
7expired
 .1.3.6.1.4.1.2076.63.3.1.1.28

fsLaHwFailTrapObjectsTable

table
.1.3.6.1.4.1.2076.63.4.1 · 1 row entry · 3 columns
Open in standard view 
This table is used to store the notification information
occurred.
fsLaHwFailTrapObjectsEntry entry .1.3.6.1.4.1.2076.63.4.1.1
This entry is used to store the notification information.
Indexes
fsLaTrapPortChannelIndex fsLaTrapPortIndex
Column Syntax OID
fsLaTrapPortChannelIndex
The ifIndex of the port-channel for which the failure has occurred.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2076.63.4.1.1.1
fsLaTrapPortIndex
The ifIndex of the port for which the failure has occurred.
A value of 0 means the failure is not port-specific.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2076.63.4.1.1.2
fsLaHwFailTrapType
The hardware error type.
Enumeration
Enumerated Values:
0createAgg
1addLinkToAgg
2deleteAgg
3removeLinkFromAgg
4setSelectionPolicy
5enableCollection
6disableCollection
7enableDistribution
 .1.3.6.1.4.1.2076.63.4.1.1.3

fsLaDLAGTrapObjectsTable

table
.1.3.6.1.4.1.2076.63.4.2 · 1 row entry · 2 columns
Open in standard view 
This table is used to store the notification information
occurred for the distributed link aggregation.
fsLaDLAGTrapObjectsEntry entry .1.3.6.1.4.1.2076.63.4.2.1
This entry is used to store the notification information.
Indexes
fsLaDLAGTrapPortChannelIndex
Column Syntax OID
fsLaDLAGTrapPortChannelIndex
The port-channel interface index of the node which is
role change event has occurred because of the
master-slave-re-selection process.
The role change can be either from master to slave
or from slave to master.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2076.63.4.2.1.1
fsLaDLAGTrapType
Traps generated in the master-slave selection/ master-slave-reselection process
Trap type can be
mastertobackupmaster : When the role played by the device changes
from master to backup-master.…
Enumeration
Enumerated Values:
0mastertobackupmaster
1backupmastertomaster
2slavetobackupmaster
3backupmastertoslave
4mastertoslave
5slavetomaster
 .1.3.6.1.4.1.2076.63.4.2.1.2

fsLaDLAGRemotePortChannelTable

table
.1.3.6.1.4.1.2076.63.6.1 · 1 row entry · 7 columns
Open in standard view 
This table is used to access the stored details of
all remote port-channels that are part of same D-LAG.
This table is indexed by port channel index and
remote port-channel unique system id.
All other objects in this table displays stored 
details of the remote port-channel.
fsLaDLAGRemotePortChannelEntry entry .1.3.6.1.4.1.2076.63.6.1.1
There is one entry in this table for each remote port-channel
participating in distributed LAG other than the self.
Indexes
fsLaPortChannelIfIndex fsLaDLAGRemotePortChannelSystemID
Column Syntax OID
fsLaDLAGRemotePortChannelSystemID
This is used to read the stored 6-octet MAC address value
of each remote D-LAG node, which uniquely identifies the
remote D-LAG node.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2076.63.6.1.1.1
fsLaDLAGRemotePortChannelSystemPriority
This object is used to read the stored system priority of
each remote D-LAG node.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.63.6.1.1.2
fsLaDLAGRemotePortChannelRolePlayed
This object is used to read the stored value of
current role played by each remote D-LAG node

Value of role played by the remote D-LAG node can be
none (0) - Current role played by the rem…
Enumeration
Enumerated Values:
0none
1master
2slave
3backupmaster
 .1.3.6.1.4.1.2076.63.6.1.1.3
fsLaDLAGRemotePortChannelKeepAliveCount
This object represents the current keep alive count value of
running keep alive counter maintained for each remote D-LAG node.

This count will be incremented by value 1 for all the remote
D-LAG node entri…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.63.6.1.1.4
fsLaDLAGRemotePortChannelSpeed
This object represents the current speed of remote node port-channel, this
can be referred in units of bits per second. If the speed of the particular
port channel is greater among all the port-channels, then the activ…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.6.1.1.5
fsLaDLAGRemotePortChannelHighSpeed
This object represents the current speed of remote node port-channel, this
can be referred in units of 1,000,000 bits per second. If the speed of the particular
port channel is greater among all the port-channels, then …
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.6.1.1.6
fsLaDLAGRemotePortChannelMtu
This object represents the current MTU of remote port-channel
which is used for selecting best links in case of Active-Active
DLAG.

If the MTU of the particular port channel is greater among all the port-…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.63.6.1.1.7

fsLaDLAGRemotePortTable

table
.1.3.6.1.4.1.2076.63.7.1 · 1 row entry · 4 columns
Open in standard view 
This table is used to access the stored port list information
of each remote D-LAG node.
This table is indexed by combination of port-channel index,
remote port-channel unique system ID, and port indices configured
for that remote D-LAG node.
fsLaDLAGRemotePortEntry entry .1.3.6.1.4.1.2076.63.7.1.1
There is one entry in this table for each port belonging
to the remote D-LAG node.
Indexes
fsLaPortChannelIfIndex fsLaDLAGRemotePortChannelSystemID fsLaDLAGRemotePortIndex
Column Syntax OID
fsLaDLAGRemotePortIndex
This object is used to get the ifIndex of each port
belonging to the remote D-LAG node.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2076.63.7.1.1.1
fsLaDLAGRemotePortBundleState
This read-only object is used to get the port bundle states of each port belonging
to the remote D-LAG node
upInBndl(0) - The port is operationally up and actively takes part in aggregation.
standby(1) …
Enumeration
Enumerated Values:
0upInBndl
1standby
2down
3upIndividual
 .1.3.6.1.4.1.2076.63.7.1.1.2
fsLaDLAGRemotePortSyncStatus
This read-only object is used to get the current sync status
of the each port belonging to the remote D-LAG node
inSync(1) - The port sync status is inSync.
outofSync(2) - The port sync sta…
Enumeration
Enumerated Values:
1inSync
2outofSync
 .1.3.6.1.4.1.2076.63.7.1.1.3
fsLaDLAGRemotePortPriority
This read-only object is used to get the current port priority
of the each port belonging to the remote D-LAG node.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.63.7.1.1.4

fsLaMCLAGRemotePortChannelTable

table
.1.3.6.1.4.1.2076.63.8.1 · 1 row entry · 7 columns
Open in standard view 
This table is used to access the stored details of
all remote port-channels that are part of same MC-LAG.
This table is indexed by port channel index and
remote port-channel unique system id.
All other objects in this table displays stored
details of the remote port-channel.
fsLaMCLAGRemotePortChannelEntry entry .1.3.6.1.4.1.2076.63.8.1.1
There is one entry in this table for each remote port-channel
participating in MC-LAG other than the self.
Indexes
fsLaPortChannelIfIndex fsLaMCLAGRemotePortChannelSystemID
Column Syntax OID
fsLaMCLAGRemotePortChannelSystemID
This is used to read the stored 6-octet MAC address value
of each remote MC-LAG node, which uniquely identifies the
remote MC-LAG node.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2076.63.8.1.1.1
fsLaMCLAGRemotePortChannelSystemPriority
This object is used to read the stored system priority of
each remote MC-LAG node.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.63.8.1.1.2
fsLaMCLAGRemotePortChannelRolePlayed
This object is used to read the stored value of
current role played by each remote MC-LAG node

Value of role played by the remote MC-LAG node can be
none (0) - Current role played by the r…
Enumeration
Enumerated Values:
0none
1master
2slave
 .1.3.6.1.4.1.2076.63.8.1.1.3
fsLaMCLAGRemotePortChannelKeepAliveCount
This object represents the current keep alive count value of
running keep alive counter maintained for each remote MC-LAG node.

This count will be incremented by value 1 for all the remote
MC-LAG node ent…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.63.8.1.1.4
fsLaMCLAGRemotePortChannelSpeed
This object represents the current speed of remote node port-channel, this
can be referred in units of bits per second. If the speed of the particular
port channel is greater among all the port-channels, then the active…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.8.1.1.5
fsLaMCLAGRemotePortChannelHighSpeed
This object represents the current speed of remote node port-channel, this
can be referred in units of 1,000,000 bits per second. If the speed of the particular
port channel is greater among all the port-channels, then …
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.63.8.1.1.6
fsLaMCLAGRemotePortChannelMtu
This object represents the current MTU of remote port-channel
which is used for selecting best links in case of Active-Active
MC-LAG.

If the MTU of the particular port channel is greater among all the por…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.63.8.1.1.7

fsLaMCLAGRemotePortTable

table
.1.3.6.1.4.1.2076.63.9.1 · 1 row entry · 5 columns
Open in standard view 
This table is used to access the stored port list information
of each remote MC-LAG node.
This table is indexed by combination of port-channel index,
remote port-channel unique system ID, and port indices configured
for that remote MC-LAG node.
fsLaMCLAGRemotePortEntry entry .1.3.6.1.4.1.2076.63.9.1.1
There is one entry in this table for each port belonging
to the remote MC-LAG node.
Indexes
fsLaPortChannelIfIndex fsLaMCLAGRemotePortChannelSystemID fsLaMCLAGRemotePortIndex
Column Syntax OID
fsLaMCLAGRemotePortIndex
This object is used to get the ifIndex of each port
belonging to the remote MC-LAG node.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2076.63.9.1.1.1
fsLaMCLAGRemotePortSlotIndex
This read-only object is used to get the current slot index
of the each port belonging to the remote MC-LAG node.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2076.63.9.1.1.2
fsLaMCLAGRemotePortBundleState
This read-only object is used to get the port bundle states of each port belonging
to the remote MC-LAG node
upInBndl(0) - The port is operationally up and actively takes part in aggregation.
standby(1)…
Enumeration
Enumerated Values:
0upInBndl
1standby
2down
3upIndividual
 .1.3.6.1.4.1.2076.63.9.1.1.3
fsLaMCLAGRemotePortSyncStatus
This read-only object is used to get the current sync status
of the each port belonging to the remote MC-LAG node
inSync(1) - The port sync status is inSync.
outofSync(2) - The port sync statu…
Enumeration
Enumerated Values:
1inSync
2outofSync
 .1.3.6.1.4.1.2076.63.9.1.1.4
fsLaMCLAGRemotePortPriority
This read-only object is used to get the current port priority
of the each port belonging to the remote MC-LAG node.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.63.9.1.1.5