fsLaPortPartnerResetAdminState
ARICENT-LA-MIB ·
.1.3.6.1.4.1.2076.63.3.1.1.6
Object
column
r/w
LacpState
A string of 8 bits corresponding to the administrative values of Partner_State. The first bit corresponds to bit 0 of Partner_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout), the third bit corresponds to bit 2 (Aggregation), the fourth bit corresponds to bit 3 (Synchronization), the fifth bit corresponds to bit 4 (Collecting), the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted) and the eighth bit corresponds to bit 7 (Expired). This object allows the reset of the values of partner LACP_Activity, LACP_Timeout and Aggregation. Get operation on this object returns zeros for the partner administrative values.
Context
- MIB
- ARICENT-LA-MIB
- OID
.1.3.6.1.4.1.2076.63.3.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsLaPortEntry
- Table
- fsLaPortTable
- Siblings
- 27
Syntax
LacpState
- Source
- LacpState
- Base type
Bits
Values & Constraints
Type Values
0 | lacpActivity |
1 | lacpTimeout |
2 | aggregation |
3 | synchronization |
4 | collecting |
5 | distributing |
6 | defaulted |
7 | expired |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsLaPortIndex The ifIndex of the port. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2076.63.3.1.1.1 |
| fsLaPortErrStateDetCount This object is used to track number of times the port goes to detected state | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.63.3.1.1.10 |
| fsLaPortErrStateRecCount This object is used to track number of times the port executes recovery code | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.63.3.1.1.11 |
| fsLaPortDefaultedStateThreshold This object is used to track the maximum number of times a port in defaulted state
can undergo error recovery. The value configured for fsLaDefaultedStateThreshold will
override t… | column | Unsigned32 | .1.3.6.1.4.1.2076.63.3.1.1.12 |
| fsLaPortHardwareFailureRecThreshold This object is used to track the maximum number of times a port can undergo recovery
after a hardware failure. The value configured for fsLaHardwareFailureRecThreshold will
overri… | column | Unsigned32 | .1.3.6.1.4.1.2076.63.3.1.1.13 |
| fsLaPortSameStateRecThreshold This object is used to track the maximum number of times a port can undergo recovery
after a hardware failure. The value configured for fsLaSameStateRecThreshold will
override the… | column | Unsigned32 | .1.3.6.1.4.1.2076.63.3.1.1.14 |
| fsLaPortUpInBundleCount This object is used to track the number of times a port goes to
up-in-bundle state. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.63.3.1.1.15 |
| fsLaPortDownInBundleCount This object is used to track the number of times a port goes to
down-in-bundle state. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.63.3.1.1.16 |
| fsLaPortBundStChgTimeStamp This object specifies the timestamp when a ports bundle
state changes. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.63.3.1.1.17 |
| fsLaPortDownInBundleReason This object specifies the reason when a port goes to operationally
down state.
operDown(1) - The port is operationally down
partnerKeyMismatch(2)- partner admin key mismatch
par… | column | Enumeration | .1.3.6.1.4.1.2076.63.3.1.1.18 |
| fsLaPortErrStateDetTimeStamp This object specifies the timestamp when the port goes
to error detected state. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.63.3.1.1.19 |
| fsLaPortMode This object is used to enable LACP, disable LACP or manually
aggregate a port. | column | PortLaMode | .1.3.6.1.4.1.2076.63.3.1.1.2 |
| fsLaPortErrStateRecTimeStamp This object specifies the timestamp when the port goes
to error triggered state. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.63.3.1.1.20 |
| fsLaPortRecTrigReason This object specifies the reason for error recovery:
defaulted(1)- Port goes to defaulted state.
hardwareFailure(2)- Hardware programming fails.
sameState(3)-Port is stuck in same… | column | Enumeration | .1.3.6.1.4.1.2076.63.3.1.1.21 |
| fsLaPortDefStateRecCount This object indicates the number of times a port undergoes error
recovery due to defaulted state. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.63.3.1.1.22 |
| fsLaPortSameStateRecCount This object indicates the number of times a port undergoes error
recovery due to same state. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.63.3.1.1.23 |
| fsLaPortHwFailRecCount This object specifies the number of times a port undergoes error
recovery due to hardware failure. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.63.3.1.1.24 |
| fsLaPortDefStateRecTimeStamp This object specifies the time when the last recovery is
triggered to overcome from the defaulted state. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.63.3.1.1.25 |
| fsLaPortSameStateRecTimeStamp This object specifies the time when the last recovery is
triggered to overcome same state failure. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.63.3.1.1.26 |
| fsLaPortHwFailRecTimeStamp This object specifies the time when the last recovery is
triggered to overcome the hardware failure. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.63.3.1.1.27 |
| fsLaPortRecState This object indicates the same state in which the port stays
for a threshold before triggering a error recovery. | column | LacpState | .1.3.6.1.4.1.2076.63.3.1.1.28 |
| fsLaPortBundleState This read-only object is used to display the port state in aggregation
upInBndl(0) - The port is operationally up and actively
takes part in aggregation.
… | column | Enumeration | .1.3.6.1.4.1.2076.63.3.1.1.3 |
| fsLaPortActorResetAdminState A string of 8 bits corresponding to the administrative values
of Actor_State as transmitted by the actor in LACPDUs.
The first bit corresponds to bit 0 of Actor_State (LACP_Activi… | column | LacpState | .1.3.6.1.4.1.2076.63.3.1.1.4 |
| fsLaPortAggregateWaitTime Duration of the port to attach to the PortChannel. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.63.3.1.1.5 |
| fsLaPortActorAdminPort The port number used as dot3adAggPortActorPort and is
communicated in LACPDUs as the Actor_Port. | column | Integer32 | .1.3.6.1.4.1.2076.63.3.1.1.7 |
| fsLaPortRestoreMtu The Restore MTU stores the original MTU of the port
before getting aggregated to port channel.
A SET on the MIB object is not allowed for SNMP users.
This operation is allowed on… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.63.3.1.1.8 |
| fsLaPortSelectAggregator This read-only object is used to display whether the port participates
in dynamic aggregator selection. The default will be static aggregation
selection.
static(0) - The p… | column | Enumeration | .1.3.6.1.4.1.2076.63.3.1.1.9 |