fsLaPortDownInBundleCount

ARICENT-LA-MIB · .1.3.6.1.4.1.2076.63.3.1.1.16
MIB view Table view

Object

column SNMPv2-SMICounter32 
This object is used to track the number of times a port goes to
down-in-bundle state.

Context

MIB
ARICENT-LA-MIB
OID
.1.3.6.1.4.1.2076.63.3.1.1.16
Type
column
Access
readonly
Status
current
Parent
fsLaPortEntry
Table
fsLaPortTable
Siblings
27

Syntax

SNMPv2-SMICounter32
Source
SNMPv2-SMICounter32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsLaPortIndex
The ifIndex of the port.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2076.63.3.1.1.1
fsLaPortErrStateDetCount
This object is used to track number of times the port goes to detected state
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2076.63.3.1.1.10
fsLaPortErrStateRecCount
This object is used to track number of times the port executes recovery code
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2076.63.3.1.1.11
fsLaPortDefaultedStateThreshold
This object is used to track the maximum number of times a port in defaulted state can undergo error recovery. The value configured for fsLaDefaultedStateThreshold will override t…
columnUnsigned32.1.3.6.1.4.1.2076.63.3.1.1.12
fsLaPortHardwareFailureRecThreshold
This object is used to track the maximum number of times a port can undergo recovery after a hardware failure. The value configured for fsLaHardwareFailureRecThreshold will overri…
columnUnsigned32.1.3.6.1.4.1.2076.63.3.1.1.13
fsLaPortSameStateRecThreshold
This object is used to track the maximum number of times a port can undergo recovery after a hardware failure. The value configured for fsLaSameStateRecThreshold will override the…
columnUnsigned32.1.3.6.1.4.1.2076.63.3.1.1.14
fsLaPortUpInBundleCount
This object is used to track the number of times a port goes to up-in-bundle state.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2076.63.3.1.1.15
fsLaPortBundStChgTimeStamp
This object specifies the timestamp when a ports bundle state changes.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.2076.63.3.1.1.17
fsLaPortDownInBundleReason
This object specifies the reason when a port goes to operationally down state. operDown(1) - The port is operationally down partnerKeyMismatch(2)- partner admin key mismatch par…
columnEnumeration.1.3.6.1.4.1.2076.63.3.1.1.18
fsLaPortErrStateDetTimeStamp
This object specifies the timestamp when the port goes to error detected state.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.2076.63.3.1.1.19
fsLaPortMode
This object is used to enable LACP, disable LACP or manually aggregate a port.
columnPortLaMode.1.3.6.1.4.1.2076.63.3.1.1.2
fsLaPortErrStateRecTimeStamp
This object specifies the timestamp when the port goes to error triggered state.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.2076.63.3.1.1.20
fsLaPortRecTrigReason
This object specifies the reason for error recovery: defaulted(1)- Port goes to defaulted state. hardwareFailure(2)- Hardware programming fails. sameState(3)-Port is stuck in same…
columnEnumeration.1.3.6.1.4.1.2076.63.3.1.1.21
fsLaPortDefStateRecCount
This object indicates the number of times a port undergoes error recovery due to defaulted state.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2076.63.3.1.1.22
fsLaPortSameStateRecCount
This object indicates the number of times a port undergoes error recovery due to same state.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2076.63.3.1.1.23
fsLaPortHwFailRecCount
This object specifies the number of times a port undergoes error recovery due to hardware failure.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2076.63.3.1.1.24
fsLaPortDefStateRecTimeStamp
This object specifies the time when the last recovery is triggered to overcome from the defaulted state.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.2076.63.3.1.1.25
fsLaPortSameStateRecTimeStamp
This object specifies the time when the last recovery is triggered to overcome same state failure.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.2076.63.3.1.1.26
fsLaPortHwFailRecTimeStamp
This object specifies the time when the last recovery is triggered to overcome the hardware failure.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.2076.63.3.1.1.27
fsLaPortRecState
This object indicates the same state in which the port stays for a threshold before triggering a error recovery.
columnLacpState.1.3.6.1.4.1.2076.63.3.1.1.28
fsLaPortBundleState
This read-only object is used to display the port state in aggregation upInBndl(0) - The port is operationally up and actively takes part in aggregation. …
columnEnumeration.1.3.6.1.4.1.2076.63.3.1.1.3
fsLaPortActorResetAdminState
A string of 8 bits corresponding to the administrative values of Actor_State as transmitted by the actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activi…
columnLacpState.1.3.6.1.4.1.2076.63.3.1.1.4
fsLaPortAggregateWaitTime
Duration of the port to attach to the PortChannel.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.2076.63.3.1.1.5
fsLaPortPartnerResetAdminState
A string of 8 bits corresponding to the administrative values of Partner_State. The first bit corresponds to bit 0 of Partner_State (LACP_Activity), the second bit corresponds…
columnLacpState.1.3.6.1.4.1.2076.63.3.1.1.6
fsLaPortActorAdminPort
The port number used as dot3adAggPortActorPort and is communicated in LACPDUs as the Actor_Port.
columnInteger32.1.3.6.1.4.1.2076.63.3.1.1.7
fsLaPortRestoreMtu
The Restore MTU stores the original MTU of the port before getting aggregated to port channel. A SET on the MIB object is not allowed for SNMP users. This operation is allowed on…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2076.63.3.1.1.8
fsLaPortSelectAggregator
This read-only object is used to display whether the port participates in dynamic aggregator selection. The default will be static aggregation selection. static(0) - The p…
columnEnumeration.1.3.6.1.4.1.2076.63.3.1.1.9