fsLaPortBundleState
ARICENT-LA-MIB ·
.1.3.6.1.4.1.2076.63.3.1.1.3
Object
column
Enumeration
This read-only object is used to display the port state in aggregation
upInBndl(0) - The port is operationally up and actively
takes part in aggregation.
standby(1) - The port is capable of joining in
aggregation group, when any of the ports in
aggregation group goes down.
down(2) - The port is operationally down in lower layers.
or the port is operational in lower layers
but temporarily not able to participate
in aggregation because of different partner
information in the same group.
upIndividual(3) - The port is operating individually and
is not taking part in aggregation.
Context
- MIB
- ARICENT-LA-MIB
- OID
.1.3.6.1.4.1.2076.63.3.1.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsLaPortEntry
- Table
- fsLaPortTable
- Siblings
- 27
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | upInBndl |
1 | standby |
2 | down |
3 | upIndividual |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsLaPortIndex The ifIndex of the port. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2076.63.3.1.1.1 |
| fsLaPortErrStateDetCount This object is used to track number of times the port goes to detected state | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.63.3.1.1.10 |
| fsLaPortErrStateRecCount This object is used to track number of times the port executes recovery code | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.63.3.1.1.11 |
| fsLaPortDefaultedStateThreshold This object is used to track the maximum number of times a port in defaulted state
can undergo error recovery. The value configured for fsLaDefaultedStateThreshold will
override t… | column | Unsigned32 | .1.3.6.1.4.1.2076.63.3.1.1.12 |
| fsLaPortHardwareFailureRecThreshold This object is used to track the maximum number of times a port can undergo recovery
after a hardware failure. The value configured for fsLaHardwareFailureRecThreshold will
overri… | column | Unsigned32 | .1.3.6.1.4.1.2076.63.3.1.1.13 |
| fsLaPortSameStateRecThreshold This object is used to track the maximum number of times a port can undergo recovery
after a hardware failure. The value configured for fsLaSameStateRecThreshold will
override the… | column | Unsigned32 | .1.3.6.1.4.1.2076.63.3.1.1.14 |
| fsLaPortUpInBundleCount This object is used to track the number of times a port goes to
up-in-bundle state. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.63.3.1.1.15 |
| fsLaPortDownInBundleCount This object is used to track the number of times a port goes to
down-in-bundle state. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.63.3.1.1.16 |
| fsLaPortBundStChgTimeStamp This object specifies the timestamp when a ports bundle
state changes. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.63.3.1.1.17 |
| fsLaPortDownInBundleReason This object specifies the reason when a port goes to operationally
down state.
operDown(1) - The port is operationally down
partnerKeyMismatch(2)- partner admin key mismatch
par… | column | Enumeration | .1.3.6.1.4.1.2076.63.3.1.1.18 |
| fsLaPortErrStateDetTimeStamp This object specifies the timestamp when the port goes
to error detected state. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.63.3.1.1.19 |
| fsLaPortMode This object is used to enable LACP, disable LACP or manually
aggregate a port. | column | PortLaMode | .1.3.6.1.4.1.2076.63.3.1.1.2 |
| fsLaPortErrStateRecTimeStamp This object specifies the timestamp when the port goes
to error triggered state. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.63.3.1.1.20 |
| fsLaPortRecTrigReason This object specifies the reason for error recovery:
defaulted(1)- Port goes to defaulted state.
hardwareFailure(2)- Hardware programming fails.
sameState(3)-Port is stuck in same… | column | Enumeration | .1.3.6.1.4.1.2076.63.3.1.1.21 |
| fsLaPortDefStateRecCount This object indicates the number of times a port undergoes error
recovery due to defaulted state. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.63.3.1.1.22 |
| fsLaPortSameStateRecCount This object indicates the number of times a port undergoes error
recovery due to same state. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.63.3.1.1.23 |
| fsLaPortHwFailRecCount This object specifies the number of times a port undergoes error
recovery due to hardware failure. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.63.3.1.1.24 |
| fsLaPortDefStateRecTimeStamp This object specifies the time when the last recovery is
triggered to overcome from the defaulted state. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.63.3.1.1.25 |
| fsLaPortSameStateRecTimeStamp This object specifies the time when the last recovery is
triggered to overcome same state failure. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.63.3.1.1.26 |
| fsLaPortHwFailRecTimeStamp This object specifies the time when the last recovery is
triggered to overcome the hardware failure. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.63.3.1.1.27 |
| fsLaPortRecState This object indicates the same state in which the port stays
for a threshold before triggering a error recovery. | column | LacpState | .1.3.6.1.4.1.2076.63.3.1.1.28 |
| fsLaPortActorResetAdminState A string of 8 bits corresponding to the administrative values
of Actor_State as transmitted by the actor in LACPDUs.
The first bit corresponds to bit 0 of Actor_State (LACP_Activi… | column | LacpState | .1.3.6.1.4.1.2076.63.3.1.1.4 |
| fsLaPortAggregateWaitTime Duration of the port to attach to the PortChannel. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.63.3.1.1.5 |
| fsLaPortPartnerResetAdminState A string of 8 bits corresponding to the administrative values
of Partner_State. The first bit corresponds to bit 0 of Partner_State
(LACP_Activity), the second bit corresponds… | column | LacpState | .1.3.6.1.4.1.2076.63.3.1.1.6 |
| fsLaPortActorAdminPort The port number used as dot3adAggPortActorPort and is
communicated in LACPDUs as the Actor_Port. | column | Integer32 | .1.3.6.1.4.1.2076.63.3.1.1.7 |
| fsLaPortRestoreMtu The Restore MTU stores the original MTU of the port
before getting aggregated to port channel.
A SET on the MIB object is not allowed for SNMP users.
This operation is allowed on… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.63.3.1.1.8 |
| fsLaPortSelectAggregator This read-only object is used to display whether the port participates
in dynamic aggregator selection. The default will be static aggregation
selection.
static(0) - The p… | column | Enumeration | .1.3.6.1.4.1.2076.63.3.1.1.9 |