ACE2002-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

144

Rows

144

Columns

1,101

ethIfTable

table

.1.3.6.1.4.1.164.3.1.6.1.1 · 1 row entry · 14 columns

Open in standard view

A table.

ethIfEntry entry .1.3.6.1.4.1.164.3.1.6.1.1.1

An entry in table.

Indexes

ethIfIdx

Column Syntax OID

ethIfIdx

A unique index of the ethernet interface/port.

SNMPv2-SMIInteger32

Constraints:
range: 1-65535

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.1.1.1.1

ethMode

This object indicates the Ethernet mode of operation.

Enumerationr/w

Enumerated Values:

1	halfDuplex
2	fullDuplex
255	notApplicable

.1.3.6.1.4.1.164.3.1.6.1.1.1.2

ethBridgingMode

This object indicates the bridging mode of the Ethernet
interface.

Enumerationr/w

Enumerated Values:

1	filtered
2	transparent

.1.3.6.1.4.1.164.3.1.6.1.1.1.3

ethEncapsulationCRCMode

This object define the encapsulation type requested for the
Ethernet interface. It indicates if we transfer the Ethernet
frame to the other side with or without the CRC.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	withCRC
3	withoutCRC

.1.3.6.1.4.1.164.3.1.6.1.1.1.4

ethBackPressure

This parameter defines whether to enable or disable Back pressure.
Back Pressure is a flow control parameter.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	disable
3	enable

.1.3.6.1.4.1.164.3.1.6.1.1.1.5

ethLimit4

This parameter determine the Back off algorithm mode.
Every 4 following collisions the Framer will be thrown out
(4 times more than usuall).

Enumerationr/w

Enumerated Values:

1	notApplicable
2	disable
3	enable

.1.3.6.1.4.1.164.3.1.6.1.1.1.6

ethSkipInitReset

This parameter defines whether read status on reset.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	notSkip
3	skip

.1.3.6.1.4.1.164.3.1.6.1.1.1.7

ethMulticastBlock

This parameter defines whether to send multicast message to WAN from LAN or not.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	unBlock
3	block

.1.3.6.1.4.1.164.3.1.6.1.1.1.8

ethBroadcastBlock

This parameter defines whether to send broadcast message to WAN from LAN or not.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	unBlock
3	block

Constraints:
range: 1-1000000

.1.3.6.1.4.1.164.3.1.6.1.1.1.9

ethSpeed

This parameter defines the line speed.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	s10Mbps
3	s100Mbps

.1.3.6.1.4.1.164.3.1.6.1.1.1.10

ethRip2

This parameter defines whether to send RIP II message
to WAN from LAN or not

Enumerationr/w

Enumerated Values:

1	notApplicable
2	no
3	yes

Constraints:
range: 0-86400

.1.3.6.1.4.1.164.3.1.6.1.1.1.11

ethPortPriority

This parameter defines if priority is to
be considered for this Port.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	none
3	fixed

.1.3.6.1.4.1.164.3.1.6.1.1.1.12

ethPortMngEnable

This parameter defines whether management data can pass through this Port.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	no
3	yes

.1.3.6.1.4.1.164.3.1.6.1.1.1.13

ethFlowCtrlMacAddress

In case of flow control - transmit frame with this specific MAC address
to inform the other end to stop sending frames.
Default: 01.80.C2.00.00.01.

MacAddressr/w

Textual Convention: MacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.164.3.1.6.1.1.1.14

ethIfCurrentTable

table

.1.3.6.1.4.1.164.3.1.6.1.2.1 · 1 row entry · 16 columns

Open in standard view

The Ethernet Current table.

ethIfCurrentEntry entry .1.3.6.1.4.1.164.3.1.6.1.2.1.1

An entry in the Ethernet Current table.

Indexes

ethIfCurrentIndex

Column	Syntax	OID
ethIfCurrentIndex The index of the Ethernet interface. It may be ifIndex.	SNMPv2-SMIInteger32 Constraints: `range: 35-35` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.3.1.6.1.2.1.1.1`
ethIfCurrentStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString Constraints: `range: 4-4` `range: 35-35`	`.1.3.6.1.4.1.164.3.1.6.1.2.1.1.2`
ethIfCurrentInFrames The counter associated with the number of received frames, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.1.1.3`
ethIfCurrentInOctets The counter associated with the number of received octets, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.1.1.4`
ethIfCurrentAlignmentErrors The counter associated with the number of received frames, which are not complete (The result of dividing the number of bits by 8 is not an Integer), encountered by the Ethernet interface in the current 15 minute int…	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.1.1.5`
ethIfCurrentFCSErrors The counter associated with the number of received frames that didn't pass the FCS test, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.1.1.6`
ethIfCurrentLengthError The counter associated with the number of received frames with length error, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.1.1.7`
ethIfCurrentOutFrames The counter associated with the number of transmitted frames, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-65535` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.1.1.8`
ethIfCurrentOutOctets The counter associated with the number of transmitted octets, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 2-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.1.1.9`
ethIfCurrentSingleCollisionFrames The counter associated with the number of successfully transmitted frames for which transmission was inhibited by exactly one collision, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.1.1.10`
ethIfCurrentMultipleCollisionFrames The counter associated with the number of successfully transmitted frames for which transmission was inhibited by more than one collision, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.1.1.11`
ethIfCurrentDeferredTransmissions The counter associated with the number of transmitted frames for which the first transmission attempt was delayed due to a busy media, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-65535` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.1.1.12`
ethIfCurrentLateCollisions The counter associated with the number of times that a collision was detected later than the first 64 bytes of the frame, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 2-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.1.1.13`
ethIfCurrentCarrierSenseErrors The counter associated with the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.1.1.14`
ethIfCurrentInputCongestionDropped The counter associated with the number of frames dropped due to lack of buffers in ingress pool, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.1.1.15`
ethIfCurrentOutputCongestionDropped The counter associated with the number of dropped frames due to a congestion, encountered by the Transmit direction to the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-65535` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.1.1.16`

ethIfIntervalTable

table

.1.3.6.1.4.1.164.3.1.6.1.2.2 · 1 row entry · 17 columns

Open in standard view

The Ethernet Interval table.

ethIfIntervalEntry entry .1.3.6.1.4.1.164.3.1.6.1.2.2.1

An entry in the Ethernet Interval table.

Indexes

ethIfIntervalIndex ethIfIntervalNumber

Column	Syntax	OID
ethIfIntervalIndex The index of the Ethernet interface. It may be ifIndex.	SNMPv2-SMIInteger32 Constraints: `range: 0-15` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.1`
ethIfIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals exist).	Integer32 Constraints: `range: 1-96` `range: 0-65535`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.2`
ethIfIntervalStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString Constraints: `range: 4-4` `range: 2-15`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.3`
ethIfIntervalInFrames The counter associated with the number of received frames, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.4`
ethIfIntervalInOctets The counter associated with the number of received octets, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.5`
ethIfIntervalAlignmentErrors The counter associated with the number of received frames, which are not complete (The result of dividing the number of bits by 8 is not an Integer), encountered by the Ethernet interface in one of the previous 96, i…	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.6`
ethIfIntervalFCSErrors The counter associated with the number of received frames that didn't pass the FCS test, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 50-1000000` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.7`
ethIfIntervalLengthError The counter associated with the number of received frames with length error, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 2-1024` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.8`
ethIfIntervalOutFrames The counter associated with the number of transmitted frames, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-100` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.9`
ethIfIntervalOutOctets The counter associated with the number of transmitted octets, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-100` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.10`
ethIfIntervalSingleCollisionFrames The counter associated with the number of successfully transmitted frames for which transmission was inhibited by exactly one collision, encountered by the Ethernet interface in one of the previous 96, individual 15 mi…	SNMPv2-SMIGauge32 Constraints: `range: 0-100` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.11`
ethIfIntervalMultipleCollisionFrames The counter associated with the number of successfully transmitted frames for which transmission was inhibited by more than one collision, encountered by the Ethernet interface in one of the previous 96, individual 15 …	SNMPv2-SMIGauge32 Constraints: `range: 0-100` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.12`
ethIfIntervalDeferredTransmissions The counter associated with the number of transmitted frames for which the first transmission attempt was delayed due to a busy media, encountered by the Ethernet interface in one of the previous 96, individual 15 mi…	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.13`
ethIfIntervalLateCollisions The counter associated with the number of times that a collision was detected later than the first 64 bytes of the frame, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, interva…	SNMPv2-SMIGauge32 Constraints: `range: 50-1000000` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.14`
ethIfIntervalCarrierSenseErrors The counter associated with the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame, encountered by the Ethernet interface in one of the previous 96, indivi…	SNMPv2-SMIGauge32 Constraints: `range: 2-1024` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.15`
ethIfIntervalInputCongestionDropped The counter associated with the number of dropped frames due to a congestion, encountered by the Receive direction to the Ethernet interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-100` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.16`
ethIfIntervalOutputCongestionDropped The counter associated with the number of dropped frames due to a congestion, encountered by the Transmit direction to the Ethernet interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-100` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.2.1.17`

ethIfPerfTable

table

.1.3.6.1.4.1.164.3.1.6.1.2.4 · 1 row entry · 3 columns

Open in standard view

The Ethernet Performance table.

ethIfPerfEntry entry .1.3.6.1.4.1.164.3.1.6.1.2.4.1

An entry in the Ethernet Performance table.

Indexes

ethIfIdx

Column	Syntax	OID
ethIfPerfInOkFrames The counter associated with the number of received OK frames, encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Statistics was done.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.4.1.1`
ethIfPerfOutOkFrames The counter associated with the number of transmitted OK frames, encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Statistics was done.	SNMPv2-SMIGauge32 Constraints: `range: 50-1000000` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.4.1.2`
ethIfPerfTotalCollisions The counter associated with the total number of collisions of any type encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Statistics was done	SNMPv2-SMIGauge32 Constraints: `range: 2-1024` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.1.2.4.1.3`

prtSonetMediumTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.1 · 1 row entry · 2 columns

Open in standard view

The SONET Medium table.

prtSonetMediumEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.1.1

An entry in the SONET Medium table. ifIndex of the
lowest SONET layer of type sonet(39).

Indexes

IF-MIBifIndex

Column	Syntax	OID
prtSonetMediumTimeElapsed The number of seconds that have elapsed since the beginning of the near end current error- measurement period.	Integer32 Constraints: `range: 0-899` `range: 0-100`	`.1.3.6.1.4.1.164.3.1.6.2.1.1.1.1`
prtSonetMediumValidIntervals The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complet…	Integer32 Constraints: `range: 0-96` `range: 0-100`	`.1.3.6.1.4.1.164.3.1.6.2.1.1.1.2`

prtSonetSectionLineCurrentTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.2 · 1 row entry · 12 columns

Open in standard view

The SONET Section/Line Current table.

prtSectionLineCurrentEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.2.1

An entry in the SONET Section/Line Current table.
ifIndex of the section/line SONET layer of type
sonet(39).

Indexes

IF-MIBifIndex

Column	Syntax	OID
prtSonetCurrentLOS The counter associated with the number of LOS seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 2-1024` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.2.1.1`
prtSonetCurrentLOF The counter associated with the number of LOF seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-100` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.2.1.2`
prtSonetCurrentLineAIS The counter associated with the number of Line AIS seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-100` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.2.1.3`
prtSonetCurrentLineFERF The counter associated with the number of Line FERF seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-100` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.2.1.4`
prtSonetCurrentSectionBIP The counter associated with the number of Section BIP errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-100` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.2.1.5`
prtSonetCurrentLineBIP The counter associated with the number of Line BIP errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.2.1.6`
prtSonetCurrentLineFEBE The counter associated with the number of Line FEBE errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.2.1.7`
prtSonetCurrentUAS The counter associated with the number of UAS encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.2.1.8`
prtSonetCurrentSES The counter associated with the number of SES encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.2.1.9`
prtSonetCurrentES The number of Errored Seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.2.1.10`
prtSonetCurrentStatus The statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out.	OctetString Constraints: `range: 4-4`	`.1.3.6.1.4.1.164.3.1.6.2.1.2.1.11`
prtSonetCurrentLSV The counter associated with the number of LSV seconds (Line Symbol Violation), encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.2.1.12`

prtSonetSectionLineIntervalTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.3 · 1 row entry · 13 columns

Open in standard view

The Section/Line Interval table.

prtSectionLineIntervalEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.3.1

An entry in the SONET Section/Line Interval table.
ifIndex of the section/line SONET layer of type
sonet(39).

Indexes

IF-MIBifIndex prtSonetLineIntervalNumber

Column	Syntax	OID
prtSonetLineIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32 Constraints: `range: 1-96` `range: 0-65535`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.1`
prtSonetIntervalLOS The counter associated with the number of LOS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 1-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.2`
prtSonetIntervalLOF The counter associated with the number of LOF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.3`
prtSonetIntervalLineAIS The counter associated with the number of Line AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.4`
prtSonetIntervalLineFERF The counter associated with the number of Line FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-65535` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.5`
prtSonetIntervalSectionBIP The counter associated with the number of Section BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 1-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.6`
prtSonetIntervalLineBIP The counter associated with the number of Line BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.7`
prtSonetIntervalLineFEBE The counter associated with the number of Line FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.8`
prtSonetIntervalUAS The counter associated with the number of UAS encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-65535` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.9`
prtSonetIntervalSES The counter associated with the number of SES encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 1-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.10`
prtSonetIntervalES The number of Errored Seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.11`
prtSonetIntervalStatus The statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out.	OctetString Constraints: `range: 4-4` `range: 0-15`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.12`
prtSonetIntervalLSV The counter associated with the number of LSV seconds (Line Symbol Violation), encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-65535` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.13`

prtSonetPathCurrentTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.4 · 1 row entry · 7 columns

Open in standard view

The SONET Path Current table.

prtPathCurrentEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.4.1

An entry in the SONET Path Current table.
ifIndex of the Path SONET layer of type
sonetPath(50).

Indexes

IF-MIBifIndex

Column	Syntax	OID
prtSonetCurrentPathAIS The counter associated with the number of Path AIS seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-15` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.4.1.1`
prtSonetCurrentPathFERF The counter associated with the number of Path FERF seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.4.1.2`
prtSonetCurrentLOP The counter associated with the number LOP seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.4.1.3`
prtSonetCurrentSLM The counter associated with the number of SLM seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.4.1.4`
prtSonetCurrentLOC The counter associated with the number of LOC seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-256` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.4.1.5`
prtSonetCurrentPathBIP The counter associated with the number of Path BIP errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-256` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.4.1.6`
prtSonetCurrentPathFEBE The counter associated with the number of Path FEBE errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-150` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.4.1.7`

prtSonetPathIntervalTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.5 · 1 row entry · 8 columns

Open in standard view

The Path Interval table.

prtPathIntervalEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.5.1

An entry in the SONET Path Interval table.

Indexes

IF-MIBifIndex prtSonetPathIntervalNumber

Column	Syntax	OID
prtSonetPathIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32 Constraints: `range: 1-96` `range: 0-256`	`.1.3.6.1.4.1.164.3.1.6.2.1.5.1.1`
prtSonetIntervalPathAIS The counter associated with the number of Path AIS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-256` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.5.1.2`
prtSonetIntervalPathFERF The counter associated with the number of Path FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-150` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.5.1.3`
prtSonetIntervalLOP The counter associated with the number of LOP seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-150` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.5.1.4`
prtSonetIntervalSLM The counter associated with the number of SLM seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.5.1.5`
prtSonetIntervalLOC The counter associated with the number of LOC seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-256` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.5.1.6`
prtSonetIntervalPathBIP The counter associated with the number of Path BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-256` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.5.1.7`
prtSonetIntervalPathFEBE The counter associated with the number of Path FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-150` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.5.1.8`

virtualIfCurrentTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.6.1 · 1 row entry · 13 columns

Open in standard view

The Virtual Interface Current table.

virtualIfCurrentEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.6.1.1

An entry in the Virtual Interface Current table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
virtualIfCurrentMinActiveVC This object holds the minimum number of active virtual containers (VCs) of the Virtual Concatenation Group in the current 15-minute interval.	Integer32 Constraints: `range: 1-63` `range: 0-256`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.1`
virtualIfCurrentMaxActiveVC This object holds the maximum number of active virtual containers (VCs) of the Virtual Concatenation Group in the current 15-minute interval.	Integer32 Constraints: `range: 1-63` `range: 0-256`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.2`
virtualIfCurrentRxFrames This counter is associated with the number of frames received from STS-3/STM-1 by a Virtual Interface in the current 15-minute interval.	SNMPv2-SMICounter64 Constraints: `range: 0-150` Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.3`
virtualIfCurrentTxFrames This counter is associated with the number of frames transmitted to STS-3/STM-1 by a Virtual Interface in the current 15-minute interval.	SNMPv2-SMICounter64 Constraints: `range: 0-150` Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.4`
virtualIfCurrentRxAbortFrames The counter associated with the number of Received Aborted frames encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: `range: 0-256` Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.5`
virtualIfCurrentTxAbortFrames The counter associated with the number of Transmitted Aborted frames encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.6`
virtualIfCurrentMinLengthViolation This counter is associated with the number of Rx payload Min Length Violation frames encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: `range: 1-4` Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.7`
virtualIfCurrentMaxLengthViolation This counter is associated with the number of Rx payload Max Length Violation frames encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: `range: 1-500` Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.8`
virtualIfCurrentFcsError The counter is associated with the number of Frame Check Sequence errors encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: `range: 5-6000` Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.9`
virtualIfCurrentByteDestuffingViolation The counter associated with the number of Byte De-stuffing Violations encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.10`
virtualIfCurrentAdressMismatch The counter associated with the number of Adress Mismatch encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.11`
virtualIfCurrentControlMismatch The counter associated with the number of Control Mismatch encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.12`
virtualIfCurrentActiveVC This object holds the number of active virtual containers (VCs) of the Virtual Concatenation Group in the current 15-minute interval.	Integer32 Constraints: `range: 1-64`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.13`

virtualIfIntervalTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.6.2 · 1 row entry · 14 columns

Open in standard view

The Virtual Interface Interval table.

virtualIfIntervalEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.6.2.1

An entry in the Virtual Interface Interval table.

Indexes

IF-MIBifIndex virtualIfIntervalNumber

Column	Syntax	OID
virtualIfIntervalNumber A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is …	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.1`
virtualIfIntervalMinActiveVC This object holds the minimum number of active virtual containers (VCs) of the Virtual Concatenation Group, in a particular 15-minute interval in the past 24 hours.	Integer32 Constraints: `range: 1-64` `range: 1-60`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.2`
virtualIfIntervalMaxActiveVC This object holds the maximum number of active virtual containers (VCs) of the Virtual Concatenation Group, in a particular 15-minute interval in the past 24 hours.	Integer32 Constraints: `range: 1-64` `range: 1-10`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.3`
virtualIfIntervalRxFrames This counter is associated with the number of frames received from STS-3/STM-1 by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	SNMPv2-SMICounter64 Constraints: `range: 50-200` Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.4`
virtualIfIntervalTxFrames This counter is associated with the number of frames transmitted to STS-3/STM-1 by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	SNMPv2-SMICounter64 Constraints: `range: 1-60` Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.5`
virtualIfIntervalRxAbortFrames This counter is associated with the number of Received Abort frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.6`
virtualIfIntervalTxAbortFrames This counter is associated with the number of Transmitted Abort frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.7`
virtualIfIntervalMinLengthViolation This counter is associated with the number of Rx payload Min Length Violation frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Constraints: `range: 60-3600` Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.8`
virtualIfIntervalMaxLengthViolation This counter is associated with the number of Rx payload Max Length Violation frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.9`
virtualIfIntervalFcsError This counter is associated with the number of Frame Check Sequence errors encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.10`
virtualIfIntervalByteDestuffingViolation This counter is associated with the number of Byte De-stuffing Violations encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.11`
virtualIfIntervalAdressMismatch This counter is associated with the number of Address Mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Constraints: `range: 1-6` Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.12`
virtualIfIntervalControlMismatch This counter is associated with the number of Control mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.13`
virtualIfIntervalBelowMinThreshold This counter is associated with the number of seconds that number of active VCs was below minimum threshold defined by vcGroupCnfgNoOfVCs, encountered by Virtual Interface in a particular 15-minute interval in the …	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.14`

virtualIfLAPSCurrentTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.6.3 · 1 row entry · 1 columns

Open in standard view

The Virtual Interface LAPS Current table.

virtualIfLAPSCurrentEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.6.3.1

An entry in the Virtual Interface
LAPS Current table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
virtualIfLAPSCurrentSapiMismatch This counter is associated with the number of received SAPI field mismatch encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: `range: 1-60` Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.3.1.1`

virtualIfLAPSIntervalTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.6.4 · 1 row entry · 1 columns

Open in standard view

The Virtual Interface LAPS table.

virtualIfLAPSIntervalEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.6.4.1

An entry in the Virtual Interface
LAPS Interval table.

Indexes

IF-MIBifIndex virtualIfIntervalNumber

Column	Syntax	OID
virtualIfLAPSIntervalSapiMismatch This counter is associated with the number of received SAPI field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.4.1.1`

virtualIfLAPFCurrentTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.6.5 · 1 row entry · 6 columns

Open in standard view

The Virtual Interface LAPF Current table.

virtualIfLAPFCurrentEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.6.5.1

An entry in the Virtual Interface
LAPF Current table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
virtualIfLAPFCurrentNlpidMismatch This counter is associated with the number of received NLPID field mismatch encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.1`
virtualIfLAPFCurrentOuiMismatch This counter is associated with the number of received OUI field mismatch encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: `range: 50-200` Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.2`
virtualIfLAPFCurrentPidMismatch This counter is associated with the number of received PID field mismatch encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.3`
virtualIfLAPFCurrentDlciMismatch This counter is associated with the number of received DLCI field mismatch encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: `range: 0-63` Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.4`
virtualIfLAPFCurrentMacRxFrames This counter is associated with the number of frames received from LAN by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.5`
virtualIfLAPFCurrentMacTxFrames This counter is associated with the number of frames transmitted to LAN by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.6`

virtualIfLAPFIntervalTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.6.6 · 1 row entry · 6 columns

Open in standard view

The Virtual Interface LAPF Interval table.

virtualIfLAPFIntervalEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.6.6.1

An entry in the Virtual Interface Interval table.

Indexes

IF-MIBifIndex virtualIfIntervalNumber

Column	Syntax	OID
virtualIfLAPFIntervalNlpidMismatch This counter is associated with the number of received NLPID field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.1`
virtualIfLAPFIntervalOuiMismatch This counter is associated with the number of received OUI field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Constraints: `range: 0-127` Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.2`
virtualIfLAPFIntervalPidMismatch This counter is associated with the number of received PID field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Constraints: `range: 1-65535` Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.3`
virtualIfLAPFIntervalDlciMismatch This counter is associated with the number of received DLCI field mismatch by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Constraints: `range: 1-60` Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.4`
virtualIfLAPFIntervalMacRxFrames This counter is associated with the number of frames received from LAN by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Constraints: `range: 1-10` Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.5`
virtualIfLAPFIntervalMacTxFrames This counter is associated with the number of frames transmitted to LAN encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.6`

virtualIfGFPCurrentTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.6.7 · 1 row entry · 10 columns

Open in standard view

The Virtual Interface GFP Current table.

virtualIfGFPCurrentEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.6.7.1

An entry in the Virtual Interface
GFP Current table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
virtualIfGFPCurrentIdleFrameError This counter is associated with the number of received GFP IDLE frames that are detected to be in error, encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: `range: 0-64` Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.1`
virtualIfGFPCurrentCHecSbError This counter is associated with the number of received GFP frames that are detected to have single-bit errors in the Core header (i.e. cHEC field) only, encountered by a Virtual Interface in the current 15-minute in…	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.2`
virtualIfGFPCurrentPtiMismatch This counter is associated with the number of rreceived GFP frames that are detected with a mismatch on the PTI field (i.e. value of PTI is not equal to Client Data or Management frame), encountered by a Virtual Inte…	PerfHist-TC-MIBPerfCurrentCount Constraints: `range: 50-200` Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.3`
virtualIfGFPCurrentExiMismatch This counter is associated with the number of received GFP frames that are detected with a mismatch on the EXI field (i.e. value of EXI is not equal to NULL or LINEAR modes), encountered by a Virtual Interface in t…	PerfHist-TC-MIBPerfCurrentCount Constraints: `range: 0-63` Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.4`
virtualIfGFPCurrentUpiMismatch This counter is associated with the number of received GFP frames that are detected with a mismatch on the UPI field (i.e. value of EXI is not equal to 00000001), encountered by a Virtual Interface in th…	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.5`
virtualIfGFPCurrentTHecSbError This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Type header (i.e. tHEC field), encountered by a Virtual Interface in the current 15-minute int…	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.6`
virtualIfGFPCurrentTHecMbError This counter is associated with the number of received GFP frames that are detected to only have multi-bit errors in the Type header (i.e. tHEC field), encountered by a Virtual Interface in the current 15-mi…	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.7`
virtualIfGFPCurrentCidMismatch This counter is associated with the number of received GFP frames that are detected to have a mismatch/unsupported value in the CID field only, encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.8`
virtualIfGFPCurrentEHecSbError This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), encountered by a Virtual Interface in the current 15-min…	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.9`
virtualIfGFPCurrentEHecMbError This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), encountered by a Virtual Interface in the current 15-minu…	PerfHist-TC-MIBPerfCurrentCount Constraints: `range: 1-1000` Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.10`

virtualIfGFPIntervalTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.6.8 · 1 row entry · 10 columns

Open in standard view

The Virtual Interface GFP Interval table.

virtualIfGFPIntervalEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.6.8.1

An entry in the Virtual Interface
GFP Interval table.

Indexes

IF-MIBifIndex virtualIfIntervalNumber

Column	Syntax	OID
virtualIfGFPIntervalIdleFrameError This counter is associated with the number of received GFP IDLE frames that are detected to be in error, encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.1`
virtualIfGFPIntervalCHecSbError This counter is associated with the number of received GFP frames that are detected to have single-bit errors in the Core header (i.e. cHEC field) only, encountered by a Virtual Interface in a particular 15-minute int…	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.2`
virtualIfGFPIntervalPtiMismatch This counter is associated with the number of rreceived GFP frames that are detected with a mismatch on the PTI field (i.e. value of PTI is not equal to Client Data or Management frame), encountered by a Virtual Inter…	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.3`
virtualIfGFPIntervalExiMismatch This counter is associated with the number of received GFP frames that are detected with a mismatch on the EXI field (i.e. value of EXI is not equal to NULL or LINEAR modes), encountered by a Virtual Inter…	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.4`
virtualIfGFPIntervalUpiMismatch This counter is associated with the number of received GFP frames that are detected with a mismatch on the UPI field (i.e. value of EXI is not equal to 00000001), encountered by a Virtual Interface in a particular 15…	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.5`
virtualIfGFPIntervalTHecSbError This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Type header (i.e. tHEC field), encountered by a Virtual Interface in a particular 15-minute inte…	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.6`
virtualIfGFPIntervalTHecMbError This counter is associated withthe number of received GFP frames that are detected to only have multi-bit errors in the Type header (i.e. tHEC field), encountered by a Virtual Interface in a particular 15-minute interv…	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.7`
virtualIfGFPIntervalCidMismatch This counter is associated with the number of received GFP frames that are detected to have a mismatch/unsupported value in the CID field only, encountered by a Virtual Interface in a particular 15-minute interval in …	PerfHist-TC-MIBPerfIntervalCount Constraints: `range: 1-20` Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.8`
virtualIfGFPIntervalEHecSbError This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), encountered by a Virtual Interface in a particula…	PerfHist-TC-MIBPerfIntervalCount Constraints: `range: 1-20` Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.9`
virtualIfGFPIntervalEHecMbError This counter is associated with the the number of received GFP frames that are detected to only have multi-bit errors in the Extension header (i.e. eHEC field), encountered by a Virtual Interface in a particular 15-mi…	PerfHist-TC-MIBPerfIntervalCount Constraints: `range: 1-20` Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.10`

prtSonetGenTable

table

.1.3.6.1.4.1.164.3.1.6.2.2.1.1 · 1 row entry · 5 columns

Open in standard view

Sonet/SDH general port configuration table.

prtSonetGenEntry entry .1.3.6.1.4.1.164.3.1.6.2.2.1.1.1

An entry in the Sonet/SDH general port configuration table.

Indexes

prtSonetGenCnfgIdx prtSonetGenIdx

Column Syntax OID

prtSonetGenCnfgIdx

This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.
For products that support several configurations, Set can be performed
only to the Temporary Config (=255…

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.1

prtSonetGenIdx

This object indicates a unique port or interface number.
For numbering, see product's spec.
For some products, the numbering can equal ifIndex.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.2

prtSonetGenSdThreshold

SD=Signal Degraded Threshold. Units: [10E-].
The threshold is 10E-x relative to the frequency of the data flow.
x=3, 4, 5, 6, 7, 8, 9.
n3= 10E-3
n4= 10E-4
n5= 10E-5
n6= 10E-6
n7= 10E-7
n8= 10E-8
n9= 10E-9 .

Enumerationr/w

Enumerated Values:

1	notApplicable
3	n3
4	n4
5	n5
6	n6
7	n7
8	n8
9	n9

.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.3

prtSonetGenEedThreshold

EED=Excessive Error Defect Threshold. Units: [10E-].
The threshold is 10E-x relative to the frequency of the data flow.
x=3, 4, 5, 6, 7, 8, 9.
n3= 10E-3
n4= 10E-4
n5= 10E-5
n6= 10E-6
n7= 10E-7
n8= 10E-8
n9= 10E-9 .

Enumerationr/w

Enumerated Values:

1	notApplicable
3	n3
4	n4
5	n5
6	n6
7	n7
8	n8
9	n9

.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.4

prtSonetGenBerEnable

Controls the activation of the Line Ber (Bit Error Rate), means whether
SD and EED threshold parameters will be enabled.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	disable
3	enable

Constraints:
range: 20-150

.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.5

prtSonetStm1Table

table

.1.3.6.1.4.1.164.3.1.6.2.2.2.1 · 1 row entry · 8 columns

Open in standard view

Sonet/SDH STM-1 port configuration table.

prtSonetStm1Entry entry .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1

An entry in the Sonet/SDH STM-1 port configuration table.

Indexes

prtSonetStm1CnfgIdx prtSonetStm1Idx

Column Syntax OID

prtSonetStm1CnfgIdx

Integer32

Constraints:
range: 1-255
range: 1-120

.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.1

prtSonetStm1Idx

This object indicates a unique port or interface number.
For numbering, see product's spec.
For some products, the numbering can equal ifIndex.

SNMPv2-SMIInteger32

Constraints:
range: 1-15

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.2

prtSonetStm1ClockSrc

Clock Source of the STM-1 port.
lbt = Loop Back Timing.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	internal
3	lbt

Constraints:
range: 1-15

.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.3

prtSonetStm1DccMode

DCC Mode. DCC=Data Communication Channel.
d1ToD3 = D1-D3 bytes are used (RS=Regeneration Section).
d4ToD12= D4-D12 bytes are used (MS=Multiplexing Section).
d1.... d12 enable user to select single DCC byte

Enumerationr/w

Enumerated Values:

1	notApplicable
2	none
3	d1ToD3
4	d4ToD12
5	d1
6	d2
7	d3
8	d4
9	d5
10	d6
11	d7
12	d8
13	d9
14	d10
15	d11
16	d12

Constraints:
range: 0-50

.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.4

prtSonetStm1RoutingProt

Routing Protocol.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	none
3	proprietary
4	rip2

Constraints:
range: 0-50

.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.5

prtSonetStm1MngProt

Management Protocol over DCC: Proprietary, PPP or Frame Relay.

Enumerationr/w

Enumerated Values:

1	notApplicable
3	proprietary
5	ppp
6	frameRelay

.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.6

prtSonetStm1OperationalMode

Operational Mode.
linear - cannot be selected when there is Redundancy between the
STM-1 ports.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	terminal
3	linear
4	linearProtection

.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.7

prtSonetStm1VoiceChannel

This parameter enable user to select whether
voice channel will be transferred using E1 byte, E2 Byte, or not at all.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	none
3	e1Byte
4	e2Byte

.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.8

prtSonetVcTable

table

.1.3.6.1.4.1.164.3.1.6.2.2.3.1 · 1 row entry · 6 columns

Open in standard view

Sonet/SDH VC port configuration table.

prtSonetVcEntry entry .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1

An entry in the Sonet/SDH VC port configuration table.

Indexes

prtSonetVcCnfgIdx prtSonetVcIdx

Column Syntax OID

prtSonetVcCnfgIdx

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.1

prtSonetVcIdx

This object indicates a unique port or interface number.
For numbering, see product's spec.
For some products, the numbering can equal ifIndex.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.2

prtSonetVcJTxPathTraceEnable

Enable/Disable Transmitting Jy Path Trace. y=1, 2:
J1 - for VC-4 layer
J2 - for VC-12 layer.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	disable
3	enable

Constraints:
range: 1-255

.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.3

prtSonetVcJRxPathTraceEnable

Enable/Disable checking Jy Path Trace. y=1, 2:
J1 - for VC-4 layer
J2 - for VC-12 layer.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	disable
3	enable

Constraints:
range: 5-35

.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.4

prtSonetVcJPathTrace

Jy Path Trace. y=1, 2:
J1 - for VC-4 layer
J2 - for VC-12 layer.
This object is applicable only if one of the previous 2 objects is 'enable'.

OctetStringr/w

Constraints:
range: 0-16
range: 5-35

.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.5

prtSonetVcConnect

Connect VCn (n - 11,12,2,3,4) port (yes/no).

Enumerationr/w

Enumerated Values:

1	notApplicable
2	no
3	yes

.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.6

prtSonetTuTable

table

.1.3.6.1.4.1.164.3.1.6.2.2.3.2 · 1 row entry · 7 columns

Open in standard view

The write operation into the Table's Objects is valid only
for the TmpCnfg entry (Scratch).

prtSonetTuEntry entry .1.3.6.1.4.1.164.3.1.6.2.2.3.2.1

An entry in table.

Indexes

prtSonetTuCnfgIdx prtSonetTuPrtIdx prtSonetTuIdx prtSonetTuConPrtIdx

Column Syntax OID

prtSonetTuCnfgIdx

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.1

prtSonetTuPrtIdx

This object indicates a unique port or interface number.
For port numbering, see product's spec.
For some products, the numbering can equal ifIndex.

SNMPv2-SMIInteger32

Constraints:
range: 1-120

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.2

prtSonetTuIdx

This object indicates a unique TU (Tributary Unit) within VC-4.
The valid TUs are 1..63.

SNMPv2-SMIInteger32

Constraints:
range: 1-120

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.3

prtSonetTuConPrtIdx

This object indicates the connected port, when prtSonetTuType=connect.
For port numbering, see product's spec.
For some products, the numbering can equal ifIndex.
notApplicable - will be indicated as 100.

SNMPv2-SMIInteger32

Constraints:
range: 1-120

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.4

prtSonetTuType

The type of TU (Tributary Unit).
connect - connected to one of the E1 ports.
bypass - bypassed to the other VC4 port.
TUs that are not connected or bypassed, will not exist in this table.

Enumerationr/w

Enumerated Values:

2	connect
3	bypass

Constraints:
range: 1-120

.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.5

prtSonetTuMode

TU Mode of connection.
addAndDrop - Add & Drop
add - Add (TU receives from the E1 ports).

Enumerationr/w

Enumerated Values:

1	notApplicable
2	addAndDrop
3	add

Constraints:
range: 1-75

.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.6

prtSonetTuRowStatus

Creation/Deletion of rows in the table.

SNMPv2-TCRowStatusr/w

Constraints:
range: 1-75

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.7

vcGroupCnfgTable

table

.1.3.6.1.4.1.164.3.1.6.2.2.4.1 · 1 row entry · 10 columns

Open in standard view

The Virtual Concatenation Group configuration table.

vcGroupCnfgEntry entry .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1

An entry in the Virtual Concatenation Group
configuration table.

Indexes

vcGroupCnfgIdx vcGroupCnfgNumber

Column Syntax OID

vcGroupCnfgIdx

Integer32

Constraints:
range: 1-255
range: 0-86400

.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.1

vcGroupCnfgNumber

Virtual Concatenation Group Number.
For FCD=155 up to four groups are defined
valid values are 1..4

SNMPv2-SMIInteger32

Constraints:
range: 0-3600

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.2

vcGroupCnfgRowStatus

Creation/Deletion of rows in the table.

SNMPv2-TCRowStatusr/w

Constraints:
range: 1-64

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.3

vcGroupCnfgVcType

User may select type of SDH Virtual Containers (VC)
(SONET Virtual Tributaries VT ) to be concatenated
in this Virtual Concatenation Group.
For SDH, values 2,3,4 are valid.
For SONET, values 5 and 6 are valid.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	vc12
3	vc3
4	vc4
5	vt1dot5
6	sts1

Constraints:
range: 1-64

.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.4

vcGroupCnfgNoOfVCs

User may select number of Virtual Containers (VC)
(SONET Virtual Tributaries VT ) to be concatenated
in this Virtual Concatenation Group.
Valid range for this number depends on
type VC selected by vcGroupCnfgVCType
F…

Integer32r/w

Constraints:
range: 0-84

.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.5

vcGroupCnfgLCAS

This object controls Link Capacity Adjustment
Scheme (LCAS) activation.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	lcasNotActive
3	lcasActive

.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.6

vcGroupCnfgEncapsulation

This object enables user to select encapsulation method.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	laps
3	lapf
4	gfp

.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.7

vcGroupCnfgGroupIfIndex

The ifIndex assigend to this group.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.8

vcGroupCnfgRip2

This object controls RIP 2.
User may select to send RIP 2 message over
selected group or not

Enumerationr/w

Enumerated Values:

1	notApplicable
2	no
3	yes

Constraints:
range: 30-10080

.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.9

vcGroupCnfgGfpChId

Generic Framing Procedure (GFP) Channel ID,
Valid only when vcGroupCnfgEncapsulation = gfp (4)
Valid values are 0x00 - oxFF (hex)

Integer32r/w

Constraints:
range: 0-255
range: 32-32

.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.10

vcgGfpMuxCnfgTable

table

.1.3.6.1.4.1.164.3.1.6.2.2.4.2 · 1 row entry · 6 columns

Open in standard view

The Virtual Concatenation Group GFP Mux configuration table.

vcgGfpMuxCnfgEntry entry .1.3.6.1.4.1.164.3.1.6.2.2.4.2.1

An entry in the Virtual Concatenation Group GFP Mux
configuration table.

Indexes

vcgGfpMuxCnfgIdx vcgGfpMuxCnfgMuxNumber

Column Syntax OID

vcgGfpMuxCnfgIdx

This object indicates the Index of the configuration being accessed.
Index of 255 relates to the Temporary (Scratch) coninguration.
For products that support several configurations, Set can be performed
only to the Temp…

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.1

vcgGfpMuxCnfgMuxNumber

Virtual Concatenation Group GFP Mux Number.
For FCD=155 up to 2 GFP muxes can be created.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.2

vcgGfpMuxCnfgRowStatus

Creation/Deletion of rows in the table.

SNMPv2-TCRowStatusr/w

Constraints:
range: 1-8192

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.3

vcgGfpMuxCnfgMuxName

Virtual Concatenation Group, GFP Mux name.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.4

vcgGfpMuxCnfgPrimeGroup

Index of Virtual Concatenation Group used as
Primary for the GFP mux created
for FCD 155 four Virtual Concatenation Group are defined:
1 -> Virtual Concatenation Group 1
2 -> Virtual Concatenation Group 2
3 -> Virt…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.5

vcgGfpMuxCnfgGrpBwAlloc

This object indicates the allocated bandwidth (BW) to each
Virtual Concatenation Group (VCG).
Each nibble indicates BW percentage, in 12.5% steps,
assigned to a group.

For FCD-155, there are 4 VCGs. …

OctetStringr/w

.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.6

prtSonetXConnectTable

table

.1.3.6.1.4.1.164.3.1.6.2.3.1 · 1 row entry · 10 columns

Open in standard view

The write operation into the Table's Objects is valid only
for the TmpCnfg entry (Scratch).

prtSonetXConnectEntry entry .1.3.6.1.4.1.164.3.1.6.2.3.1.1

An entry in table.

Indexes

prtSonetXConnectCnfgIdx prtSonetXConnectPrtIdx prtSonetXConnectConPrtIdx prtSonetXConnectAUGIdx prtSonetXConnectTUG3Idx prtSonetXConnectTUG2Idx prtSonetXConnectTUnIdx

Column Syntax OID

prtSonetXConnectCnfgIdx

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.1

prtSonetXConnectPrtIdx

This object indicates a unique port or interface number.
For port numbering, see product's spec.
For some products, the numbering can equal ifIndex.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.2

prtSonetXConnectConPrtIdx

This object indicates the connected port.
For port numbering, see product's spec.
For some products, the numbering can equal ifIndex.
notApplicable - will be indicated as 255.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.3

prtSonetXConnectAUGIdx

This object indicates an AUG (Administrative Unit Group) within STM-N.
The valid AUGs values are:
1 for STM-1
1...4 for STM-4,
1..16 for STM-16 and
1..64 for STM-64 (STM-64)
255 designates NA.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.4

prtSonetXConnectTUG3Idx

This object indicates a TUG-3 (Tributary Unit Group 3) within VC-4.
The valid TUG3s are values are 1..3. and 255 which designates NA

SNMPv2-SMIInteger32

Constraints:
range: 1-65535

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.5

prtSonetXConnectTUG2Idx

This object indicates a TUG2 (Tributary Unit Group 2 ) within VC-3.
The valid TUG2's values are 1..7 and 255 which designates NA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.6

prtSonetXConnectTUnIdx

This object indicates a TUn within TUG-2 or TUG-3
(Tributary Unit n, where n is 2, 12 or 11 within TUG-2,
or 3 within TUG-3)
valid values are
1 for TU-2
1 for TU-3
1..4 for TU-11
1..3 for TU-12
…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.7

prtSonetXConnectRowStatus

Creation/Deletion of rows in the table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.8

prtSonetXConnectDirection

TU direction of connection.
rx=Drop
tx=Add
both = Add & Drop

Enumerationr/w

Enumerated Values:

1	notApplicable
2	rx
3	tx
4	both

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.9

prtSonetXConnectTuNumber

This object indicates which TU is used in prtSonetXConnectTUnIdx

Enumerationr/w

Enumerated Values:

1	notApplicable
2	tu2
3	tu3
4	tu11
5	tu12

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.10

prtSDs3IfTable

table

.1.3.6.1.4.1.164.3.1.6.3.1.1 · 1 row entry · 2 columns

Open in standard view

The DS3 interface table.

prtDs3IfEntry entry .1.3.6.1.4.1.164.3.1.6.3.1.1.1

An entry in the DS3 interface table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
prtDs3IfTimeElapsed The number of seconds that have elapsed since the beginning of the near end current error- measurement period.	Integer32 Constraints: `range: 0-899`	`.1.3.6.1.4.1.164.3.1.6.3.1.1.1.1`
prtDs3IfValidIntervals The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complet…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.4.1.164.3.1.6.3.1.1.1.2`

prtDs3CurrentTable

table

.1.3.6.1.4.1.164.3.1.6.3.1.2 · 1 row entry · 19 columns

Open in standard view

The DS3 Current table.

prtDs3CurrentEntry entry .1.3.6.1.4.1.164.3.1.6.3.1.2.1

An entry in the DS3 Current table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
prtDs3CurrentLOS The counter associated with the number of LOS seconds, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.1`
prtDs3CurrentOOF The counter associated with the number of OOF seconds, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 1-5000` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.2`
prtDs3CurrentLOC The counter associated with the number of LOC seconds, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.3`
prtDs3CurrentAIS The counter associated with the number of AIS seconds, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.4`
prtDs3CurrentRDI The counter associated with the number of RDI seconds, encountered by a DS3 interface.	SNMPv2-SMIGauge32 Constraints: `range: 0-63` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.5`
prtDs3CurrentUAS The counter associated with the number of UAS, encountered by a SONET interface.	SNMPv2-SMIGauge32 Constraints: `range: 0-7` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.6`
prtDs3CurrentBIP The counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-128` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.7`
prtDs3CurrentFEBE The counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 0-254` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.8`
prtDs3CurrentSLM The counter associated with the number of SLM seconds, encountered by an E3 (only ) interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.9`
prtDs3CurrentSES The counter associated with the number of SES encountered by a E3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.10`
prtDs3CurrentES The number of Errored Seconds, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.11`
prtDs3CurrentBitParity Bit Parity Error counter. Relevant to T3 only.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.12`
prtDs3CurrentPlcpLOF The counter associated with the number of LOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter is relevant for plcpInternal(5) or plcpExternal(6) configur…	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.13`
prtDs3CurrentPlcpRAI Receiving Yellow/Remote Alarm Indication. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.14`
prtDs3CurrentPlcpBIP The counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.15`
prtDs3CurrentPlcpFEBE The counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Constraints: `range: 1-5000` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.16`
prtDs3CurrentBPV Number of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the current 15 minute interval. This object is relevant only for Electrical Line of Fomi-E3/T3.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.17`
prtDs3CurrentLCE Number of LCE (Link Code Errors) encountered by a DS3 interface in the current 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/T3.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.18`
prtDs3CurrentStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString Constraints: `range: 4-4` `range: 0-63`	`.1.3.6.1.4.1.164.3.1.6.3.1.2.1.19`

prtDs3IntervalTable

table

.1.3.6.1.4.1.164.3.1.6.3.1.3 · 1 row entry · 20 columns

Open in standard view

The DS3 Interval table.

prtDs3IntervalEntry entry .1.3.6.1.4.1.164.3.1.6.3.1.3.1

An entry in the DS3 Interval table.

Indexes

IF-MIBifIndex prtDs3IntervalNumber

Column	Syntax	OID
prtDs3IntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.1`
prtDs3IntervalLOS The counter associated with the number of LOS seconds , encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.2`
prtDs3IntervalOOF The counter associated with the number of OOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.3`
prtDs3IntervalLOC The counter associated with the number of LOC seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.4`
prtDs3IntervalAIS The counter associated with the number of AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 1-4094` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.5`
prtDs3IntervalRDI The counter associated with the number of RDI seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-7` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.6`
prtDs3IntervalUAS The counter associated with the number of UAS, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-16` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.7`
prtDs3IntervalBIP The counter associated with the number of BIP errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.8`
prtDs3IntervalFEBE The counter associated with the number of FEBE errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.9`
prtDs3IntervalSLM The counter associated with the number of SLM seconds, encountered by an E3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.10`
prtDs3IntervalSES The counter associated with the number of SES encountered by a E3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.11`
prtDs3IntervalES The number of Errored Seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 30-86400` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.12`
prtDs3IntervalBitParity Bit Parity Error counter. Relevant to T3 only.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.13`
prtDs3IntervalPlcpLOF The counter associated with the number of LOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter is relevant for plcpInternal(5) or plcpExternal(6) configur…	SNMPv2-SMIGauge32 Constraints: `range: 30-86400` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.14`
prtDs3IntervalPlcpRAI Receiving Yellow/Remote Alarm Indication. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Constraints: `range: 10-600` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.15`
prtDs3IntervalPlcpBIP The counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.16`
prtDs3IntervalPlcpFEBE The counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.17`
prtDs3IntervalBPV Number of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the specified 15 minute interval. This object is relevant only for Electrical Line of Fomi-E3/T3.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.18`
prtDs3IntervalLCE Number of LCE (Link Code Errors) encountered by a DS3 interface in the specified 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/T3.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.19`
prtDs3IntervalStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString Constraints: `range: 4-4`	`.1.3.6.1.4.1.164.3.1.6.3.1.3.1.20`

prtDs3TotalTable

table

.1.3.6.1.4.1.164.3.1.6.3.1.4 · 1 row entry · 3 columns

Open in standard view

A list of Total entries.

prtDs3TotalEntry entry .1.3.6.1.4.1.164.3.1.6.3.1.4.1

An entry of Total table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
prtDs3TotalUAS Number of UASs (Unavailable Seconds) , encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.4.1.6`
prtDs3TotalBPV Number of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.4.1.17`
prtDs3TotalLCE Number of LCE (Link Code Errors) encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.3.1.4.1.18`

dsx1XCurrentTable

table

.1.3.6.1.4.1.164.3.1.6.4.1.2 · 1 row entry · 12 columns

Open in standard view

A list of current statistics entries.  This table
contains additional objects for the current table.

dsx1XCurrentEntry entry .1.3.6.1.4.1.164.3.1.6.4.1.2.1

An entry containing additional statistical counters
applicable to a particular current table.

Indexes

DS1-MIBdsx1CurrentIndex WING-MIBwingCfgDhcpSvrName WING-MIBwingCfgDhcpSvrOptionName

Column	Syntax	OID
dsx1CurrentLOS The counter associated with the number of LOS seconds, encountered by a DS1 interface in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.2.1.1`
dsx1CurrentLOF The counter associated with the number of LOF seconds, encountered by a DS1 interface in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: `range: 0-254` Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.2.1.2`
dsx1CurrentLOC Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver lost cells delineation .	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.2.1.3`
dsx1CurrentAIS The counter associated with the number of AIS seconds, encountered by a DS1 interface in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.2.1.4`
dsx1CurrentRAI Remote Alarm Indication: Transmitted in the outgoing direction (toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received from the far end (PABX) over FDL when it detects a Loss …	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.2.1.5`
dsx1CurrentLOMF Loss of Multi-Frame sequence in E1 time slot 16.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.2.1.6`
dsx1CurrentFEBE Far End Block Errors, as reported in the first bit of frames 13 and 15, on multiframe E1 lines with CRC4, in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.2.1.7`
dsx1CurrentStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString Constraints: `range: 4-4` `range: 1-255`	`.1.3.6.1.4.1.164.3.1.6.4.1.2.1.8`
dsx1CurrentBPV The counter associated with the number of BPVs (Bi-Polar Violations) encountered by a DS1 interface in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.2.1.9`
dsx1CurrentLOCRCMF Loss of CRC4 Multi-Frame sequence in E1. encountered in the current 15 minute interval	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.2.1.10`
dsx1CurrentLOFC Counts the number of loss of frame events measured. encountered in the current 15 minute interval	PerfHist-TC-MIBPerfCurrentCount Constraints: `range: 1-31622399` Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.2.1.11`
dsx1CurrentCRCErrors Counts the number of CRC error events, encountered in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.2.1.12`

dsx1XIntervalTable

table

.1.3.6.1.4.1.164.3.1.6.4.1.3 · 1 row entry · 11 columns

Open in standard view

A list of Interval entries.  This table
contains additional objects for the interval table.

dsx1XIntervalEntry entry .1.3.6.1.4.1.164.3.1.6.4.1.3.1

An entry containing additional statistical counters
applicable to a particular interval table.

Indexes

DS1-MIBdsx1IntervalIndex DS1-MIBdsx1IntervalNumber

Column	Syntax	OID
dsx1IntervalLOS The counter associated with the number of LOS seconds , encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.	PerfHist-TC-MIBPerfIntervalCount Constraints: `range: 1-864000` Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.3.1.1`
dsx1IntervalLOF The counter associated with the number of OOF seconds, encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.3.1.2`
dsx1IntervalLOC Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver lost cells delineation .	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.3.1.3`
dsx1IntervalAIS The counter associated with the number of AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.3.1.4`
dsx1IntervalRAI Remote Alarm Indication: Transmitted in the outgoing direction (toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received from the far end (PABX) over FDL when it detects a Loss …	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.3.1.5`
dsx1IntervalLOMF Loss of Multi-Frame sequence in E1 time slot 16.	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.3.1.6`
dsx1IntervalFEBE Far End Block Errors, as reported in the first bit of frames 13 and 15, on multiframe E1 lines with CRC4, in one of the previous 96, individual, 15 minute intervals.	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.3.1.7`
dsx1IntervalStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString Constraints: `range: 4-4`	`.1.3.6.1.4.1.164.3.1.6.4.1.3.1.8`
dsx1IntervalBPV The counter associated with the number of BPV (Bi-Polar Violations) encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.	PerfHist-TC-MIBPerfIntervalCount Constraints: `range: 0-64` Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.3.1.9`
dsx1IntervalLOCRCMF Loss of CRC4 Multi-Frame sequence in E1.	PerfHist-TC-MIBPerfIntervalCount Constraints: `range: 15-86400` Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.3.1.10`
dsx1IntervalLOFC Counts the number of loss of frame events measured in one of the previous 96, individual 15 minute, intervals.	PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.3.1.11`

dsx1XTotalTable

table

.1.3.6.1.4.1.164.3.1.6.4.1.4 · 1 row entry · 2 columns

Open in standard view

A list of Total statistics entries.  This table
contains additional objects for the Total table.

dsx1XTotalEntry entry .1.3.6.1.4.1.164.3.1.6.4.1.4.1

An entry containing additional statistical counters
applicable to a particular current table.

Indexes

DS1-MIBdsx1TotalIndex

Column	Syntax	OID
dsx1TotalBPV The counter associated with the number of BPV (Bi-Polar Violations) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.	PerfHist-TC-MIBPerfTotalCount Constraints: `range: 1-20` Textual Convention: PerfHist-TC-MIBPerfTotalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.4.1.9`
dsx1TotalLOFC The counter associated with the number loss of frames encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.	PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount `Unsigned32`	`.1.3.6.1.4.1.164.3.1.6.4.1.4.1.11`

dsx1XConfigTable

table

.1.3.6.1.4.1.164.3.1.6.4.2 · 1 row entry · 18 columns

Open in standard view

An extension to the DS1 Configuration table.

dsx1XConfigEntry entry .1.3.6.1.4.1.164.3.1.6.4.2.1

An entry containing additional configuration
parameters.

Indexes

DS1-MIBdsx1LineIndex

Column Syntax OID

dsx1IdleCode

Byte pattern of the data received/transmitted in the
E1T1 framer idle timeslots.
Valid range: (0 - FF HEX).

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.4.2.1.1

dsx1LineMode

T1 device operation mode.
Valid for T1 only.

Enumerationr/w

Enumerated Values:

1	csu
2	dsu

.1.3.6.1.4.1.164.3.1.6.4.2.1.2

dsx1dBTxGain

Transmit line Gain for T1 CSU line mode.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	neg75dB
3	neg15dB
4	neg225dB
5	zerodB

.1.3.6.1.4.1.164.3.1.6.4.2.1.3

dsx1RxSensitivity

Determine the maximum attenuation of the
receive signal that can be compensated for
by the interface receive path. Not applicable for T1.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	neg10dB
3	neg32dB

.1.3.6.1.4.1.164.3.1.6.4.2.1.4

dsx1RestoreTime

Used to change the sync. algorithms to reduce the time
required for the port to return to normal operation after
a RED alarm.

Enumerationr/w

Enumerated Values:

1	other
2	sec1
3	sec10

.1.3.6.1.4.1.164.3.1.6.4.2.1.5

dsx1TcFirstSignal

Trunk conditioning signal - value to be sent as a signal
during the first 2.5 seconds after alarm detection.
Range is 0x0..0xF. 0xFF is a NULL value. Valid for T1 only.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.4.2.1.6

dsx1TcSignal

Trunk conditioning signal value after alarm detection.
Range is 0x1..0xF for E1, and 0x0..0xF for T1.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.4.2.1.7

dsx1TcPattern

Trunk conditioning data pattern to be sent upon a DS0 fail.
Range is 0x0..0xFF.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.4.2.1.8

dsx1Scramble

Scrambling is an operation that randomizes the bits
of the payload of the ATM cell by a polynom.
This operation helps with the error detection mechanism
of the HEC. Not applicable for E1.
active - will scramble/descram…

Enumerationr/w

Enumerated Values:

1	notApplicable
2	notActive
3	active

.1.3.6.1.4.1.164.3.1.6.4.2.1.9

dsx1LineAdaptiveTimingMode

Enables end to end clock synchronization.
Default value - off.

Enumerationr/w

Enumerated Values:

1	off
2	on

Constraints:
range: 1-255

.1.3.6.1.4.1.164.3.1.6.4.2.1.10

dsx1TxClockSource

The source of Transmit Clock.
'loopTiming' indicates that the recovered receive clock
is used as the transmit clock.

'localTiming' indicates that a local clock
source is used or when an external clock …

Enumerationr/w

Enumerated Values:

1	loopTiming
2	localTiming
3	throughTiming
4	adaptive

.1.3.6.1.4.1.164.3.1.6.4.2.1.11

dsx1AisEnable

Enable/ disable AIS transmit when Ethernet cable (for TDMoIP) is out (disconnected).

Enumerationr/w

Enumerated Values:

1	notApplicable
2	disable
3	enable

.1.3.6.1.4.1.164.3.1.6.4.2.1.12

dsx1TsEchoCancel

This parameter defines for each TS whether Echo-Cancellation is on.
Each bit represents one TS as follow:
First octet bit'0' = TS#1, bit'7' = TS#8, .. 2nd octet bit'0' = TS#9,..,
4th octet bit'7' = TS#32.
Octets and bi…

OctetStringr/w

Constraints:
range: 4-4

.1.3.6.1.4.1.164.3.1.6.4.2.1.13

dsx1EchoCancelerModule

This parameter indicates whether echo-cancellation module
exists for this line.

Enumeration

Enumerated Values:

2	notExist
3	exist

Constraints:
range: 0-0
range: 10-1000000

.1.3.6.1.4.1.164.3.1.6.4.2.1.14

dsx1PortFunction

This object determines the ATM Mode over the
physical port.
uni - The port will function as an ATM UNI.
ces - The port will function as a CES.
ima - The port will function as an IMA-ATM.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	uni
3	ces
4	ima

.1.3.6.1.4.1.164.3.1.6.4.2.1.15

dsx1PortMultiplier

This object determines the data rate of each TS
(Kbps units).
This parameter is applicable for T1 only.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	r56
3	r64

Constraints:
range: 0-60

.1.3.6.1.4.1.164.3.1.6.4.2.1.16

dsx1LeasedLine

This parameter defines whether Line mode is regular (non Leased Line mode)
or transparent (Leased Line mode).

Enumerationr/w

Enumerated Values:

1	notApplicable
2	disable
3	enable

.1.3.6.1.4.1.164.3.1.6.4.2.1.17

dsx1CsuLoop

This parameter defines whether CSU loop will be done locally (by IPmux)
or will be transferred to the TDM device.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	local
3	transparent

.1.3.6.1.4.1.164.3.1.6.4.2.1.18

hdlcTable

table

.1.3.6.1.4.1.164.3.1.6.5.1 · 1 row entry · 11 columns

Open in standard view

The HDLC configuration table.

hdlcEntry entry .1.3.6.1.4.1.164.3.1.6.5.1.1

Defines the contents of each line in the RAD HDLC Table.

Indexes

IF-MIBifIndex

Column Syntax OID

hdlcProtocol

The HDLC protocol type
V35 - HDLC encapsulated over V35
X21 - HDLC encapsulated over X21
RS530 - HDLC encapsulated over RS530

Enumerationr/w

Enumerated Values:

1	notApplicable
2	v35
3	x21
4	rs530

.1.3.6.1.4.1.164.3.1.6.5.1.1.1

hdlcRateResolution

The baud rate of the internal clock.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	nx56Kbps
3	nx64Kbps

.1.3.6.1.4.1.164.3.1.6.5.1.1.2

hdlcTxClockSource

The baud rate of the internal clock.

Enumerationr/w

Enumerated Values:

1	internal
2	external

.1.3.6.1.4.1.164.3.1.6.5.1.1.3

hdlcTerminalMode

Enumerationr/w

Enumerated Values:

1	dce
2	dte

.1.3.6.1.4.1.164.3.1.6.5.1.1.4

hdlcLoopbackState

internal - All data coming from the
network port is looped back
external - All data comming from the line is
looped back.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	internal
3	external
4	disable

.1.3.6.1.4.1.164.3.1.6.5.1.1.5

hdlcTxClockPolarity

normal - The transmitted data is sampled at the middle of bit time
inverse - The transmitted data is sampled at the end of the bit time
(high data rate/long cable).

Enumerationr/w

Enumerated Values:

1	normal
2	inverse

.1.3.6.1.4.1.164.3.1.6.5.1.1.6

hdlcFlowControl

Enable/Disable the CTS/RTS flow control signals.

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.164.3.1.6.5.1.1.7

hdlcLineRate

The rate values for HDLC are n*56/64Kbps, where 1<=n<=32, 64, 128
and the following values: 1544, 3088, 6176.
The rate values for HSSI is nMbps, where 1<=n<=52.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.5.1.1.8

hdlcRxClockMode

Enumerationr/w

Enumerated Values:

1	notApplicable
2	internal
3	external

.1.3.6.1.4.1.164.3.1.6.5.1.1.9

hdlcLOF

Total number of seconds the port is in Loss Of Frame state.

SNMPv2-SMIGauge32

Constraints:
range: 1-4094

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.5.1.1.10

hdlcRxClockPolarity

normal - The received data is sampled at the middle of bit time
inverse - The received data is sampled at the end of the bit time
(high data rate/long cable).

Enumerationr/w

Enumerated Values:

1	normal
2	inverse

Constraints:
range: 64-64

.1.3.6.1.4.1.164.3.1.6.5.1.1.11

hdlcCurrentTable

table

.1.3.6.1.4.1.164.3.1.6.5.2.1 · 1 row entry · 8 columns

Open in standard view

The HDLC Current table.

hdlcCurrentEntry entry .1.3.6.1.4.1.164.3.1.6.5.2.1.1

An entry in the HDLC Current table.

Indexes

hdlcCurrentIfIndex

Column	Syntax	OID
hdlcCurrentIfIndex The index of the HDLC interface. It may be ifIndex.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.3.1.6.5.2.1.1.1`
hdlcCurrentStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString Constraints: `range: 4-4`	`.1.3.6.1.4.1.164.3.1.6.5.2.1.1.2`
hdlcCurrentLOF The counter associated with the number of seconds the port is in Loss Of Frame state, encountered by the HDLC interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.5.2.1.1.3`
hdlcCurrentInFrames The counter associated with the number of received frames, encountered by the HDLC interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.5.2.1.1.4`
hdlcCurrentInErrors The counter associated with the number of Errored received frames, encountered by the HDLC interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.5.2.1.1.5`
hdlcCurrentOutFrames The counter associated with the number of transmitted frames, encountered by the HDLC interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.5.2.1.1.6`
hdlcCurrentAbortedFrames The counter associated with the number of frames, in which at least seven consecutive '1'-s (Abort sequence) were encountered by the HDLC interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.5.2.1.1.7`
hdlcCurrentLengthError The counter associated with the number of received frames with length error, encountered by the HDLC interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.5.2.1.1.8`

hdlcIntervalTable

table

.1.3.6.1.4.1.164.3.1.6.5.2.2 · 1 row entry · 9 columns

Open in standard view

The HDLC Interval table.

hdlcIntervalEntry entry .1.3.6.1.4.1.164.3.1.6.5.2.2.1

An entry in the HDLC Interval table.

Indexes

hdlcIntervalIfIndex hdlcIntervalNumber

Column	Syntax	OID
hdlcIntervalIfIndex The index of the HDLC interface. It may be ifIndex.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.3.1.6.5.2.2.1.1`
hdlcIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals exist).	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.164.3.1.6.5.2.2.1.2`
hdlcIntervalStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString Constraints: `range: 4-4`	`.1.3.6.1.4.1.164.3.1.6.5.2.2.1.3`
hdlcIntervalLOF The counter associated with the number of seconds the port is in Loss Of Frame state, encountered by an HDLC interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.5.2.2.1.4`
hdlcIntervalInFrames The counter associated with the number of received frames, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.5.2.2.1.5`
hdlcIntervalInErrors The counter associated with the number of Errored received frames, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.5.2.2.1.6`
hdlcIntervalOutFrames The counter associated with the number of transmitted frames, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.5.2.2.1.7`
hdlcIntervalAbortedFrames The counter associated with the number of frames, in which at least seven consecutive '1'-s (Abort sequence) were encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.5.2.2.1.8`
hdlcIntervalLengthError The counter associated with the number of received frames with length error, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.5.2.2.1.9`

sysCClkSrcTable

table

.1.3.6.1.4.1.164.3.3.1.6.1 · 1 row entry · 6 columns

Open in standard view

All the entries of this table are identical (have the 
same value) for all the configurations (1..255) except 
the TmpCnfg.
The write operation into the Table Objects is valid only
for the TmpCnfg entry.

sysCClkSrcEntry entry .1.3.6.1.4.1.164.3.3.1.6.1.1

An entry in table.

Indexes

sysCClkCnfgIdx sysCClkSrcIdx

Column Syntax OID

sysCClkCnfgIdx

This attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.164.3.3.1.6.1.1.1

sysCClkSrcIdx

An index in the table. There are only two entries in the
table.
master - refers Master clock parameters
fallback - refers Fallback clock parameters

Enumeration

Enumerated Values:

1	master
2	fallback

.1.3.6.1.4.1.164.3.3.1.6.1.1.2

sysCClkSrcMode

This entry indicates the source the nodal timing is
locked to.
none - is an invalid option for Master clock.
internal - is an invalid option for Fallback clock .
station - is an invalid option for a stand-alone un…

Enumerationr/w

Enumerated Values:

1	none
2	internal
3	rxClk
4	station
5	lbt
6	ntr
7	adaptive
255	notApplicable

.1.3.6.1.4.1.164.3.3.1.6.1.1.3

sysCClkSrcPrt

This entry is valid only when working in rxClk mode.

For ACE2002 in case of invalid entry the return value
will be 0.
For other products in case of invalid entry the return
value will be 9999.
…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.3.1.6.1.1.4

sysCClkStationFreq

This entry indicates the frequency of the station clock
when the source is 'station'.
The value will be applicable only when the sysCClkSrcMode is
'station'.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	f1544Khz
3	f2048Khz

.1.3.6.1.4.1.164.3.3.1.6.1.1.5

sysCClkRevertiveTimeout

The time in seconds in which the system will monitor the higher
level clock source, before decision to revert to that clock.
In case the time is zero, revertive mode will be disabled.

SNMPv2-SMIInteger32r/w

Constraints:
range: 1-4

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.3.1.6.1.1.6

radBridgeMaskTable

table

.1.3.6.1.4.1.164.4.1.3 · 1 row entry · 20 columns

Open in standard view

Mask tables enable definition of forwarding restrictions and 
control of message flow in the internetwork. Each entry
in this table defines a mask statement consisting of up to 
three mask definitions and an action defined by 
radBridgeMaskOper. Different types of mask entries are supported, 
as defined by radBridgeMaskType.

radBridgeMaskEntry entry .1.3.6.1.4.1.164.4.1.3.1

An entry in table radBridgeMaskTable.

Indexes

radBridgeMaskType radBridgeMaskIfIndex radBridgeMaskNum

Column Syntax OID

radBridgeMaskType

Defines the type of mask entry.

Enumerationr/w

Enumerated Values:

1	tx
2	rx
3	compress
4	priority
5	loadSharing
6	facs
7	codConnect
8	codDisconnect

Constraints:
range: 0-40

.1.3.6.1.4.1.164.4.1.3.1.1

radBridgeMaskIfIndex

Specifies the if Index of the interface to which the mask is applied.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.3.1.2

radBridgeMaskNum

The Mask entry number, defined by its line number in the mask
table.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.3.1.3

radBridgeMaskDest

Specifies the type of destination address carried by the frame
to which the mask will be applied. Unassigned-condition
deactivates the mask entry.

Enumerationr/w

Enumerated Values:

1	unassigned-cond
2	broadcast-msge
3	multicast-msge
4	all-msge
5	none

.1.3.6.1.4.1.164.4.1.3.1.4

radBridgeMaskPat1

Describes the mask field which is either a 16 bit binary pattern,
or four digit hexadecimal pattern.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.164.4.1.3.1.5

radBridgeMaskActiveBit1

Specifies the positions of the wild card characters (*)
in the radBridgeMaskPat1 field.

OctetStringr/w

.1.3.6.1.4.1.164.4.1.3.1.6

radBridgeMaskFrom1

Offset base of radBridgeMaskPat1 within the frame.
Net can be in some cases the data start point.

Enumerationr/w

Enumerated Values:

1	mac
2	llc
3	net

.1.3.6.1.4.1.164.4.1.3.1.7

radBridgeMaskOffset1

Specifies the radBridgeMaskPat1 offset within the frame (in bytes) from
the base defined in by radBridgeMaskForm1.The mask offset is an even
decimal number in the range of 0 to 1518.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.3.1.8

radBridgeMaskCond1

Specifies the logical condition of the mask pattern:

true - Condition is valid if at the position specified by
radBridgeMaskOffset1 the packet contains data that matches
the content of radBridgeMaskPa…

Enumerationr/w

Enumerated Values:

1	false
2	true

.1.3.6.1.4.1.164.4.1.3.1.9

radBridgeMaskPat2

Describes the mask field which is either a 16 bit binary pattern,
or four digit hexadecimal pattern.

OctetStringr/w

.1.3.6.1.4.1.164.4.1.3.1.10

radBridgeMaskActiveBit2

Specifies the positions of the wild card characters (*)
in the radBridgeMaskPat2 field.

OctetStringr/w

.1.3.6.1.4.1.164.4.1.3.1.11

radBridgeMaskFrom2

Offset base of radBridgeMaskPat2 within the frame.
Net can be in some cases the data start point.

Enumerationr/w

Enumerated Values:

1	mac
2	llc
3	net

.1.3.6.1.4.1.164.4.1.3.1.12

radBridgeMaskOffset2

Specifies the radBridgeMaskPat2 offset within the frame (in bytes) from
the base defined in by radBridgeMaskForm2.The mask offset is an even
decimal number in the range of 0 to 1518.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.3.1.13

radBridgeMaskCond2

Specifies the logical condition of the mask pattern:

true - Condition is valid if at the position specified by
radBridgeMaskOffset2 the packet contains data that matches
the content of radBridgeMaskPa…

Enumerationr/w

Enumerated Values:

1	false
2	true

Constraints:
range: 1-4094

.1.3.6.1.4.1.164.4.1.3.1.14

radBridgeMaskPat3

Describes the mask field which is either a 16 bit binary pattern,
or four digit hexadecimal pattern.

OctetStringr/w

.1.3.6.1.4.1.164.4.1.3.1.15

radBridgeMaskActiveBit3

Specifies the positions of the wild card characters (*)
in the radBridgeMaskPat3 field.

OctetStringr/w

.1.3.6.1.4.1.164.4.1.3.1.16

radBridgeMaskFrom3

Offset base of radBridgeMaskPat3 within the frame.
Net can be in some cases the data start point.

Enumerationr/w

Enumerated Values:

1	mac
2	llc
3	net

.1.3.6.1.4.1.164.4.1.3.1.17

radBridgeMaskOffset3

Specifies the radBridgeMaskPat3 offset within the frame (in bytes) from
the base defined in by radBridgeMaskForm3. The mask offset is an even
decimal number in the range of 0 to 1518.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.3.1.18

radBridgeMaskCond3

Specifies the logical condition of the mask pattern:

true - Condition is valid if at the position specified by
radBridgeMaskOffset3 the packet contains data that matches
the content of radBridgeMaskPa…

Enumerationr/w

Enumerated Values:

1	false
2	true

.1.3.6.1.4.1.164.4.1.3.1.19

radBridgeMaskOper

The type of action to be taken if the frame meets the
conditions of the mask.
noOp = disabled (mask remains on list, but is not active)
delete = mask is removed from the list.

Enumerationr/w

Enumerated Values:

1	block
2	forward
3	route
4	forward-route
5	high-priority
6	noOp
7	delete

Constraints:
range: 0-8

.1.3.6.1.4.1.164.4.1.3.1.20

radBridgeCODParamTable

table

.1.3.6.1.4.1.164.4.1.4.1 · 1 row entry · 8 columns

Open in standard view

The table of COD parameters

radBridgeCODEntry entry .1.3.6.1.4.1.164.4.1.4.1.1

Each radBridgeCODEntry consists of the following parameters

Indexes

radBridgeCODIfIndex

Column Syntax OID

radBridgeCODIfIndex

The interface to which this COD entry is applicable.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.4.1.1.1

radBridgeCODManualConnect

The management station can start connection manually
by setting this parameter

Enumerationr/w

Enumerated Values:

1	connect
2	disconnect

.1.3.6.1.4.1.164.4.1.4.1.1.2

radBridgeCODMode

In answer mode only one incoming call may be accepted at a time. Other nodes
attempting to access the local modem will receive a busy signal until the
connection is terminated. (Answer mode has no difficulty supporting …

Enumerationr/w

Enumerated Values:

1	answer
2	originate
3	disable
4	answerAndOriginate

.1.3.6.1.4.1.164.4.1.4.1.1.3

radBridgeCODConnectDelay

The connect delay defines the minimum time period that
the link must stay disconnected, between 2 succesive
connections (in seconds).

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.4.1.1.4

radBridgeCODisConnectDelay

The disconnect delay defines the minimum time period
the link must stay connected, between 2 succesive
disconnections (in seconds).

SNMPv2-SMIInteger32r/w

Constraints:
range: 0-27

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.4.1.1.5

radBridgeCODImplicitSwitch

The inplicit switch allows the user to ignore implicit triggers provided
by the COD software.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.164.4.1.4.1.1.6

radBridgeCODNumAccess

The number of successful connections that have been established since
the COD has been reset.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.4.1.4.1.1.7

radBridgeCODTotalConnecTime

The sum of all the connect time intervals since the COD was reset.

SNMPv2-SMIInteger32

Constraints:
range: 1-2347

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.4.1.1.8

radBridgeCODTimeTriggerTable

table

.1.3.6.1.4.1.164.4.1.4.2 · 1 row entry · 6 columns

Open in standard view

The table of COD parameters

radBridgeCODTimeTriggerEntry entry .1.3.6.1.4.1.164.4.1.4.2.1

Each radBridgeCODTimeTriggerEntry consists of the following parameters

Indexes

radBridgeCODTimeIfIndex radBridgeCODDay radBridgeCODTimeTriggerNum

Column Syntax OID

radBridgeCODTimeIfIndex

The interface to which this COD Time Trigger entry is applicable.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.4.2.1.1

radBridgeCODDay

The day of the week in which the dial up connection operates.

Enumeration

Enumerated Values:

1	mon
2	tue
3	wed
4	thu
5	fri
6	sat
7	sun

.1.3.6.1.4.1.164.4.1.4.2.1.2

radBridgeCODTimeTriggerNum

Every day of the week the user can configure 3 dial up connections.

Integer32

Constraints:
range: 1-3

.1.3.6.1.4.1.164.4.1.4.2.1.3

radBridgeCODTimeTriggerFrom

Time to start Dial Up connection, in format hh:mm.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.4.1.4.2.1.4

radBridgeCODTimeTriggerTo

Time to terminate Dial Up connection, in format HH:MM.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.4.1.4.2.1.5

radBridgeCODTimeTriggerStatus

The status of a table entry.

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

Constraints:
range: 0-65535

.1.3.6.1.4.1.164.4.1.4.2.1.6

radBridgeCODTrafficTable

table

.1.3.6.1.4.1.164.4.1.4.3.1 · 1 row entry · 2 columns

Open in standard view

The table of COD Traffic trigger

radBridgeCODTrafficEntry entry .1.3.6.1.4.1.164.4.1.4.3.1.1

Each radBridgeCODTrafficEntry consists of the following parameters.

Indexes

radBridgeCODProtocolType

Column Syntax OID

radBridgeCODProtocolType

The Protocol Type of the Traffic Table

Enumerationr/w

Enumerated Values:

1	ip
2	ipx
3	other

.1.3.6.1.4.1.164.4.1.4.3.1.1.1

radBridgeCODTrafficTriggerStatus

Command of Status of the Protocol Traffic Trigger

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.164.4.1.4.3.1.1.2

radBridgeCODCondTable

table

.1.3.6.1.4.1.164.4.1.4.4 · 1 row entry · 7 columns

Open in standard view

The table of COD Condition parameters

radBridgeCODCondEntry entry .1.3.6.1.4.1.164.4.1.4.4.1

Each radBridgeCODCondEntry consists of the following parameters

Indexes

radBridgeCODCondIfIndex

Column Syntax OID

radBridgeCODCondIfIndex

The interface, this COD entry is applicable to.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.4.4.1.1

radBridgeCODOriginateConnectCondition

This condition, allows the user to specify the
condition under which the link is connected.
The options are
onPowerOn - On power on.
whenAnyStationOnLan - When any station on lan.
onTraffic - …

Enumerationr/w

Enumerated Values:

1	onPowerOn
2	whenAnyStationOnLan
3	onTraffic
4	onManualConnect

.1.3.6.1.4.1.164.4.1.4.4.1.2

radBridgeCODOriginateDisConnectCondition

This condition allows the user to specify the
condition under which the link is disconnected.
The options are:
noStationOnLan - When there is no station on lan.
Counts 15 minutes from the point …

Enumerationr/w

Enumerated Values:

1	noStationOnLan
2	onTraffic
3	onDelayFromConnectionOnRequest
4	onManualDisConnect

Constraints:
range: 1-6

.1.3.6.1.4.1.164.4.1.4.4.1.3

radBridgeCODOriginateDisConnectDelay

Delay time in seconds.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.4.4.1.4

radBridgeCODAnswerConnectCondition

CODCondAnswerConnect allows the user to specify
the condition under which the link is connected.
The options are:
onPowerOn - On power on.
whenAnyStationOnLan - When any station on lan.
onTraffic …

Enumerationr/w

Enumerated Values:

1	onPowerOn
2	whenAnyStationOnLan
3	onTraffic
4	onManualConnect

.1.3.6.1.4.1.164.4.1.4.4.1.5

radBridgeCODSpecificOnTrafficOIDCondition

A reference to a specific entry in the
radBridgeMaskTable, which describes the
particular COD condition .
If Connect or Disconnect Conditions are not
onTraffic, its value should be set to the
OBJECT IDENTIFIER { 0 0 …

ObjectIdentifier

Constraints:
range: 0-256

.1.3.6.1.4.1.164.4.1.4.4.1.6

radBridgeCODDisConnectMinimunFramesNumber

Frames rate.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.4.4.1.7

radBridgeIPXRipTable

table

.1.3.6.1.4.1.164.4.1.5.2.6 · 1 row entry · 9 columns

Open in standard view

The routing table used by RIP to calculate routes to remote
desination networks.

radBridgeIPXRipTableEntry entry .1.3.6.1.4.1.164.4.1.5.2.6.1

The routing information for one of this entity's destination networks.

Indexes

radBridgeIPXRipDestNetwork radBridgeIPXRipPolicy

Column Syntax OID

radBridgeIPXRipDestNetwork

The destination network address to which this entry's
routing information pertains.

OctetString

Constraints:
range: 4-4
range: 0-10

.1.3.6.1.4.1.164.4.1.5.2.6.1.1

radBridgeIPXRipPolicy

A value specifying the precidence of the route. A value of
zero means that the route is the best route, a value of one
means that the route is the second best route and so on.

Enumeration

Enumerated Values:

1	main
2	alternate

Constraints:
range: 1-255

.1.3.6.1.4.1.164.4.1.5.2.6.1.2

radBridgeIPXRipForwardingRouter

The IPX node address of the next hop (router) for the
entry's associated destination network.

OctetStringr/w

Constraints:
range: 6-6
range: 1-1000

.1.3.6.1.4.1.164.4.1.5.2.6.1.3

radBridgeIPXRipNIC

An interface identifier specifying what IPX interface the
next hop can be found on.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.5.2.6.1.4

radBridgeIPXRipTickMetric

The metric, in terms of transit time, associated with the route
given by the entry. This time is in terms of 1/18ths of a
second.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.5.2.6.1.5

radBridgeIPXRipHopMetric

The metric, in terms of distance , associated with the route
given by the entry.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.5.2.6.1.6

radBridgeIPXRipAgingTime

The last time that the entry was updated. The time will be
provided in terms of the MIB-I object sysUpTime.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.4.1.5.2.6.1.7

radBridgeIPXRipValueStatus

The entry status value; whether the entry is permanent (added
statically), reachable or unreachable. In the latter two cases
it would be added by RIP. A semiDynamic entry is an entry
enterd manualy by the user and can …

Enumerationr/w

Enumerated Values:

1	static
2	dynamic
3	invalid
4	semiDynamic

.1.3.6.1.4.1.164.4.1.5.2.6.1.8

radBridgeIPXRipForwardType

The type of route. Note that local(2) refers to a route for which the
next hop is the final destination; remote(3) refers to a route
for which the next hop is not the final destination.

Enumerationr/w

Enumerated Values:

1	other
2	local
3	remote

.1.3.6.1.4.1.164.4.1.5.2.6.1.9

radBridgeIPXRipInfTable

table

.1.3.6.1.4.1.164.4.1.5.2.7 · 1 row entry · 3 columns

Open in standard view

The RIP interface table.

radBridgeIPXRipInfEntry entry .1.3.6.1.4.1.164.4.1.5.2.7.1

Each entry corresponds to one ifindex.

Indexes

radBridgeIPXRipInfIfIndex

Column	Syntax	OID
radBridgeIPXRipInfIfIndex This value of Ifindex is same as radBridgeIPXIfIndex in the IPX Interface Table.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.4.1.5.2.7.1.1`
radBridgeIPXRipInfBcastUpdate The RIP periodic update interval, in seconds. Zero value corresponds to infinite interval.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.4.1.5.2.7.1.2`
radBridgeIPXRipInfAgeMultiplier The holding multiplier for information received in RIP periodic updates. Zero value corresponds to infinite aging time.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.4.1.5.2.7.1.3`

radBridgeIPXSapTable

table

.1.3.6.1.4.1.164.4.1.5.3.6 · 1 row entry · 9 columns

Open in standard view

The Server Information table is used by SAP to store information
of services which are available on the internetwork.

radBridgeIPXSapTableEntry entry .1.3.6.1.4.1.164.4.1.5.3.6.1

The server information for one of this entity's server entries.

Indexes

radBridgeIPXSapServerType radBridgeIPXSapName

Column Syntax OID

radBridgeIPXSapServerType

The type of the server for which this entry pertains.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.5.3.6.1.1

radBridgeIPXSapName

The name of the server for which this entry pertains.

OctetString

Constraints:
range: 48-48

.1.3.6.1.4.1.164.4.1.5.3.6.1.2

radBridgeIPXSapNetwork

The IPX network address of the host on which this server exists.

OctetStringr/w

Constraints:
range: 4-4

.1.3.6.1.4.1.164.4.1.5.3.6.1.3

radBridgeIPXSapNode

The IPX node address of the host on which this server exists.

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.164.4.1.5.3.6.1.4

radBridgeIPXSapSocket

The IPX socket number that is being used by the server to
which this entry pertains.

SNMPv2-SMIInteger32r/w

Constraints:
range: 0-3

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.5.3.6.1.5

radBridgeIPXSapHopsToServer

The number of hops to the entity on which this server exists.

Integer32r/w

Constraints:
range: 1-16

.1.3.6.1.4.1.164.4.1.5.3.6.1.6

radBridgeIPXSapNIC

An Network Interface Card identifier specifying what IPX
interface the next hop can be found on.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.5.3.6.1.7

radBridgeIPXSapAgingTime

The last time that the entry was updated. The time will be
provided in terms of the MIB-I object sysUpTime.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.4.1.5.3.6.1.8

radBridgeIPXSapStatus

The status of the entry.

Enumerationr/w

Enumerated Values:

1	permanent
2	dynamic
3	invalid
4	semiDynamic

Constraints:
range: 0-25

.1.3.6.1.4.1.164.4.1.5.3.6.1.9

radBridgeIPXSapInfTable

table

.1.3.6.1.4.1.164.4.1.5.3.7 · 1 row entry · 3 columns

Open in standard view

The Sap interface table.

radBridgeIPXSapInfEntry entry .1.3.6.1.4.1.164.4.1.5.3.7.1

Each entry corresponds to one ifindex.

Indexes

radBridgeIPXSapInfIfIndex

Column	Syntax	OID
radBridgeIPXSapInfIfIndex This value of Ifindex is same as radBridgeIPXIfIndex in the IPX Interface Table.	SNMPv2-SMIInteger32 Constraints: `range: 0-30` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.4.1.5.3.7.1.1`
radBridgeIPXSapInfBcastUpdate The SAP periodic update interval, in seconds. Zero value corresponds to infinite interval.	SNMPv2-SMIInteger32r/w Constraints: `range: 1-8000` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.4.1.5.3.7.1.2`
radBridgeIPXSapInfAgeMultiplier The holding multiplier for information received in SAP periodic updates. Zero value corresponds to infinite aging time.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.4.1.5.3.7.1.3`

maskingTable

table

.1.3.6.1.4.1.164.4.1.6.3 · 1 row entry · 24 columns

Open in standard view

This is the new masking scheme. 
Mask tables enable definition of forwarding restrictions and 
control of message flow in the internetwork. Each entry
in this table defines a mask statement and an action defined by 
maskingOperation.

maskingEntry entry .1.3.6.1.4.1.164.4.1.6.3.1

Defines the contents of each line in the mask table.

Indexes

maskingType maskingIfIndex maskingIndex

Column Syntax OID

maskingType

Defines the type of mask entry.

Enumerationr/w

Enumerated Values:

1	tx
2	rx
3	compress
4	priority
5	loadSharing
6	facs
7	codConnect
8	codDisconnect

.1.3.6.1.4.1.164.4.1.6.3.1.1

maskingIfIndex

Specifies the ifIndex of the interface to which the mask is applied.

SNMPv2-SMIInteger32r/w

Constraints:
range: 0-255

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.6.3.1.2

maskingIndex

An index to the masking table. This number should not be greater than maskingMaxEntries

SNMPv2-SMIInteger32r/w

Constraints:
range: 1-65535

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.6.3.1.3

maskingProtocolType

The base protocol for masking. IPX, IP, others.

Enumerationr/w

Enumerated Values:

1	unknown
2	ip
3	ipx
4	sna
5	netbios
6	apple
7	dec
255	all

Constraints:
range: 1-10000000

.1.3.6.1.4.1.164.4.1.6.3.1.4

maskingSmartMaskOID

A reference to a specific Smart mask table (old radBridgeMaskTable)
which enables a more specific mask type.
If this information is not available, its value
should be set to the OBJECT IDENTIFIER { 0 0 }.

ObjectIdentifier

.1.3.6.1.4.1.164.4.1.6.3.1.5

maskingFrameType

Enables the user to decide about frame type
* all frame
* just broadcast
* just multicast.

Enumerationr/w

Enumerated Values:

1	unknown
2	all
3	broadcast
4	multicast

.1.3.6.1.4.1.164.4.1.6.3.1.6

maskingFrameTypeCondition

Specifies the logical condition of the mask pattern:

true - Condition is valid if at the position specified by
maskingFrameType the packet contains data that matches
the content of maskingFrameType.…

Enumerationr/w

Enumerated Values:

1	false
2	true

Constraints:
range: 1-255

.1.3.6.1.4.1.164.4.1.6.3.1.7

maskingSourceAddress

The source address is according to the maskingMacOrNet and
maskingProtocolType variables.
In case of 'MAC' enter 6 bytes (48 bit) of source address.
In case of 'NET'
if the maskingProtocolType is IP, this is t…

GenAddressr/w

Textual Convention: GenAddress OctetString

Type Constraints:
range: 12

.1.3.6.1.4.1.164.4.1.6.3.1.8

maskingSourceActiveBits

Specifies the positions of the wild card characters (*)
in the maskingSourceAddress field. Only the 1's bit will be taken in
considerations.

GenAddressr/w

Textual Convention: GenAddress OctetString

Type Constraints:
range: 12

.1.3.6.1.4.1.164.4.1.6.3.1.9

maskingSourceMacOrNet

The variable maskingSourceAddress and maskingSourceActiveBits
will be treated as MAC, or NET address.
- If maskingProtocolType = 'all', 'sna', 'netbios', dec or
'unknown', the maskingSourceMacOrNet can be macAddress…

Enumerationr/w

Enumerated Values:

1	macAddress
2	netAddress
3	ipRange
4	appleAddress

.1.3.6.1.4.1.164.4.1.6.3.1.10

maskingSourceCondition

Specifies the logical condition of the mask pattern:

true - Condition is valid if at the position specified by
maskingSourceAddress (in conjunction with maskingSourceActiveBits)
the …

Enumerationr/w

Enumerated Values:

1	false
2	true

.1.3.6.1.4.1.164.4.1.6.3.1.11

maskingDestAddress

If maskingFrameType = broadcast or multicast, this object
is NOT APPLICABLE.
If maskingFrameType = all or unknown, this object is
applicable.
The destination address is according to the maskingMacOrNet and maskingProto…

GenAddressr/w

Constraints:
range: 1-65535

Textual Convention: GenAddress OctetString

Type Constraints:
range: 12

.1.3.6.1.4.1.164.4.1.6.3.1.12

maskingDestActiveBits

If maskingFrameType = broadcast or multicast, this object
is NOT APPLICABLE.
If maskingFrameType = all or unknown, this object is
applicable.
Specifies the positions of the wild card characters (*)
in the maskingDe…

GenAddressr/w

Textual Convention: GenAddress OctetString

Type Constraints:
range: 12

.1.3.6.1.4.1.164.4.1.6.3.1.13

maskingDestMacOrNet

If maskingFrameType = broadcast or multicast, this object
is NOT APPLICABLE.
If maskingFrameType = all or unknown, this object is
applicable.
- If maskingProtocolType = 'all', 'sna', 'netbios', dec or
'unknown', the…

Enumerationr/w

Enumerated Values:

1	macAddress
2	netAddress
3	ipRange
4	appleAddress

Constraints:
range: 0-64

.1.3.6.1.4.1.164.4.1.6.3.1.14

maskingDestCondition

If maskingFrameType = broadcast or multicast, this object
is NOT APPLICABLE.
If maskingFrameType = all or unknown, this object is
applicable.
Specifies the logical condition of the mask pattern:

true - …

Enumerationr/w

Enumerated Values:

1	false
2	true

Constraints:
range: 0-64

.1.3.6.1.4.1.164.4.1.6.3.1.15

maskingLowLevelProt

This field is set in conjunction with the maskingProtocolType variable.
This variable specifies the low level protocol.
The IPX socket entered in maskingDestAddress has priority
over the value of maskingLowLevelProt, w…

Enumerationr/w

Enumerated Values:

1	unknown
2	ipxRip
3	ipxSap
4	ipxSpx
5	ipUdp
6	ipTcp
7	ipIcmp
8	ipxNcp
9	ipxWan
10	ipxEco
11	ipxErr
12	ipxPep

Constraints:
range: 0-128

.1.3.6.1.4.1.164.4.1.6.3.1.16

maskingLowLevelProtCondition

Specifies the logical condition of the mask pattern:

true - Condition is valid if at the position specified by
maskingLowLevelProt the packet contains data that matches
the content of maskingLowLeve…

Enumerationr/w

Enumerated Values:

1	false
2	true

Constraints:
range: 1-4094

.1.3.6.1.4.1.164.4.1.6.3.1.17

maskingHighLevelProt

This field is set in connection to the maskingProtocolType variable.
This variable specifies the high level protocols (application).
As for today it supports just IP protocol stack.
The object's value is a sum of the fo…

SNMPv2-SMIInteger32r/w

Constraints:
range: 500-1492

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.6.3.1.18

maskingHighLevelProtCondition

Specifies the logical condition of the mask pattern:

true - Condition is valid if at the position specified by
maskingHighLevelProt the packet contains data that matches
the content of maskingHi…

Enumerationr/w

Enumerated Values:

1	false
2	true

Constraints:
range: 1-8000

.1.3.6.1.4.1.164.4.1.6.3.1.19

maskingPortNum

The port number is the same as in high level protocol. It
specifies the dest. port in IP case or the dest. socket
in case of IPX & apple protocols.
IP - This object is applicable only if none (0) value was selecte…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.6.3.1.20

maskingPortNumCondition

Specifies the logical condition of the mask pattern:

true - Condition is valid if at the position specified by
maskingPortNum the packet contains data that matches
the content of maskingPortNum.…

Enumerationr/w

Enumerated Values:

1	false
2	true

.1.3.6.1.4.1.164.4.1.6.3.1.21

maskingOperation

The type of action to be taken if the frame meets the
conditions of the mask.
noOp = disabled (mask remains on list, but is not active)
delete = mask is removed from the list.
smartMask = the operation and desti…

Enumerationr/w

Enumerated Values:

1	block
2	forward
3	route
4	forward-route
5	high-priority
6	noOp
7	delete
8	smartMask

.1.3.6.1.4.1.164.4.1.6.3.1.22

maskingSrcPortNum

The source port number.
For IP: No Condition.
For IPX: This object is applicable only if the socket entered in
maskingSourceAddress is don't care (00) and maskingLowLevelProt
is NOT ipxRip or ipxS…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.6.3.1.23

maskingSrcPortNumCondition

The same as 'maskingPortNumCondition'.
Relates to source port.

Enumerationr/w

Enumerated Values:

1	false
2	true

.1.3.6.1.4.1.164.4.1.6.3.1.24

radBridgeCurrentTable

table

.1.3.6.1.4.1.164.4.1.7.1 · 1 row entry · 3 columns

Open in standard view

The RAD Bridge Current table.

radBridgeCurrentEntry entry .1.3.6.1.4.1.164.4.1.7.1.1

An entry in the RAD Bridge Current table.

Indexes

radBridgeCurrentIndex

Column	Syntax	OID
radBridgeCurrentIndex The index of the Bridge interface. It may be ifIndex.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.4.1.7.1.1.1`
radBridgeCurrentIngressFilteringDiscardedFrames The counter associated with the number of Discarded Frames upon Ingress Filtering, encountered by a Bridge interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.4.1.7.1.1.2`
radBridgeCurrentFrameTypeDiscardedFrames The counter associated with the number of Discarded Frames upon Frame Type and Tagging Mismatch, encountered by a Bridge interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.4.1.7.1.1.3`

radBridgeIntervalTable

table

.1.3.6.1.4.1.164.4.1.7.2 · 1 row entry · 4 columns

Open in standard view

The RAD Bridge Interval table.

radBridgeIntervalEntry entry .1.3.6.1.4.1.164.4.1.7.2.1

An entry in the RAD Bridge Interval table.

Indexes

radBridgeIntervalIndex radBridgeIntervalNumber

Column	Syntax	OID
radBridgeIntervalIndex The index of the bridge interface. It may be ifIndex.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.4.1.7.2.1.1`
radBridgeIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals exist).	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.164.4.1.7.2.1.2`
radBridgeIntervalIngressFilteringDiscardedFrames The counter associated with the number of Discarded Frames upon Ingress Filtering, encountered by a Bridge interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-32` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.4.1.7.2.1.3`
radBridgeIntervalFrameTypeDiscardedFrames The counter associated with the number of Discarded Frames upon Frame Type and Tagging Mismatch, encountered by a Bridge interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-32` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.4.1.7.2.1.4`

radBridgePortBaseVlanTable

table

.1.3.6.1.4.1.164.4.1.8.1 · 1 row entry · 7 columns

Open in standard view

A table containing static configuration information for
each VLAN configured into the device by  management.
All entries are permanent and will
be restored after the device is reset.

radBridgePortBaseVlanEntry entry .1.3.6.1.4.1.164.4.1.8.1.1

Static information for a VLAN configured into the
device by (local or network) management.

Indexes

radBridgePortBaseVlanCnfgIdx radBridgePortBaseVlanIdx

Column Syntax OID

radBridgePortBaseVlanCnfgIdx

This object indicates the Idx of the Agent Cnfg the following
objects refer.
255=Temporary Cnfg (when relevant,
Set is done only to this configuration).
For Agents that support only one configuration,
this object wil…

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.164.4.1.8.1.1.1

radBridgePortBaseVlanIdx

Index of the port based VLAN.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.8.1.1.2

radBridgePortBaseVlanName

An administratively assigned string, which may be used
to identify the the port based VLAN.

OctetStringr/w

Constraints:
range: 0-32
range: 1-4094

.1.3.6.1.4.1.164.4.1.8.1.1.3

radBridgePortBaseVlanEgressPorts

The set of ports which are permanently assigned to the
egress list for this port based VLAN by management.
The default value of this object is a string of zeros.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.164.4.1.8.1.1.4

radBridgePortBaseVlanVirtualGroups

The set of Virtual Groups which are permanently assigned to
this port based VLAN by management.
(read Virtual Group instead of port in PortList Textual Convention)
The default value of this object is a string of zeros.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.164.4.1.8.1.1.5

radBridgePortBaseVlanRowStatus

This object enable user to
create/delete entries in this table.

SNMPv2-TCRowStatusr/w

Constraints:
range: 1-10

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.4.1.8.1.1.6

radBridgePortBaseVlanMng

This object allows user to enable/disable
management traffic on this VLAN.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	disable
3	enable

Constraints:
range: 1-10

.1.3.6.1.4.1.164.4.1.8.1.1.7

radBridgePortVlanMemberTable

table

.1.3.6.1.4.1.164.4.1.8.2 · 1 row entry · 4 columns

Open in standard view

The Bridge Ports-VLAN Membership table.
This table enables the user to assign:
- Several VLANs to a Port.
- Several Ports to a VLAN.

radBridgePortVlanMemberEntry entry .1.3.6.1.4.1.164.4.1.8.2.1

An entry in the Bridge Ports-VLANs Memebership table.

Indexes

radBridgePortVlanMemberBridgeIdx radBridgePortVlanMemberPortIdx radBridgePortVlanMemberVlanId

Column Syntax OID

radBridgePortVlanMemberBridgeIdx

This object indicates the Bridge Index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.8.2.1.1

radBridgePortVlanMemberPortIdx

This object indicates the Bridge's Port Index.
For some cases, it can be used as the Port ofIndex.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.8.2.1.2

radBridgePortVlanMemberVlanId

This object indicates the VLAN ID.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.8.2.1.3

radBridgePortVlanMemberRowStatus

This object enables the user to
create/delete entries in this table.

SNMPv2-TCRowStatusr/w

Constraints:
range: 1-8

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.4.1.8.2.1.4

radBridgeGenFlowTable

table

.1.3.6.1.4.1.164.4.1.9.1 · 1 row entry · 6 columns

Open in standard view

A table containing static configuration information for
Bridge configured into the device by (local or
network) management.  All entries are permanent and will
be restored after the device is reset.

radBridgeGenFlowEntry entry .1.3.6.1.4.1.164.4.1.9.1.1

Static information for a Bridge configured into the
device by management.

Indexes

radBridgeGenFlowCnfgIdx WING-MIBwingCfgProfName radBridgeGenFlowIdx WING-MIBwingCfgProfRouteNetwork

Column Syntax OID

radBridgeGenFlowCnfgIdx

This object indicates the Idx of the
Agent Cnfg the following objects refer.
255=Temporary Cnfg (when relevant,

Set is done only to this configuration).
For Agents that support only one configuration,
…

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.164.4.1.9.1.1.1

radBridgeGenFlowIdx

For Agent having more than one bridge,
this index may be used as bridge index

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.9.1.1.2

radBridgeGenFlowRowStatus

This object enable user to
create/delete entries in this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.4.1.9.1.1.3

radBridgeGenFlowFloodOrBcastMaxRate

This object controls maximum Flooding or Broadcast Rate:
Max number of multicast along with unknown
or flooded unicast frames allowed to enter
any port.
The number is presented as percentage of bandwidth.
Onc…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.9.1.1.4

radBridgeGenFlowQosMode

This object controls Quality of Service mode.
User may select which field(s)
(in case of fields - which one has precedence)
will affect prioritization of data between egress queues.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	vlanTag
3	dscp
4	dscpAndVlanTag
5	vlanTagAndDscp
6	none

.1.3.6.1.4.1.164.4.1.9.1.1.5

radBridgeGenFlowSchedulingMode

This object controls which scheduling mode is used:
Weighted Fair Queuing (WFQ) scheme or Strict Priority (SP).

Enumerationr/w

Enumerated Values:

1	notApplicable
2	wfq
3	sp

Constraints:
range: 0-65534

.1.3.6.1.4.1.164.4.1.9.1.1.6

radBridgeInvBasePortTable

table

.1.3.6.1.4.1.164.4.1.10.1 · 1 row entry · 2 columns

Open in standard view

An inversed table to dot1dBasePortTable 
from RFC1493 with reduced information.
This table index is known to the NMS and 
this way the needed information can be received
by just one Get command, instead of searching 
the entire dot1dBasePortTable (where it is an 
attribute).

radBridgeInvBasePortEntry entry .1.3.6.1.4.1.164.4.1.10.1.1

The bridge port number for each bridge port
interface index.

Indexes

radBridgeInvBasePortIfIndex

Column	Syntax	OID
radBridgeInvBasePortIfIndex The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this Bridge port.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.4.1.10.1.1.1`
radBridgeInvBasePort The Bridge port number.	SNMPv2-SMIInteger32 Constraints: `range: 0-4` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.4.1.10.1.1.2`

mngTrapIpTable

table

.1.3.6.1.4.1.164.6.2.7 · 1 row entry · 4 columns

Open in standard view

This table indicates  the destination address of the traps.
Internally it will be limited to ten addresses.

mngEntry entry .1.3.6.1.4.1.164.6.2.7.1

An entry in table.

Indexes

mngID WING-MIBwingCfgProfName WING-MIBwingCfgProfBridgeVlanId

Column	Syntax	OID
mngID This value indicates an index of a specific IP address	SNMPv2-SMIInteger32 Constraints: `range: 1-4095` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.7.1.1`
mngIP This value indicates the destination address of the traps. IP 0.0.0.0 removes the entry.	SNMPv2-SMIIpAddressr/w Constraints: `range: 64-64` Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.164.6.2.7.1.2`
mngIPMask deprecated This value indicates the mask of the destination addresses of the traps.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.164.6.2.7.1.3`
mngTrapMask The value of this attribute determines the type of traps the agent should mask and not send to this NMS. The value is differently determined for different products. There are mainly two methods: - an integer number, …	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.7.1.4`

trapTable

table

.1.3.6.1.4.1.164.6.2.11 · 1 row entry · 3 columns

Open in standard view

This table includes the last few traps generated by the agent, for future retrieval. The table
has a limited capacity. If traps are not retrieved in proper time, they will be
over-written by new traps

trapEntry entry .1.3.6.1.4.1.164.6.2.11.1

An entry in table.

Indexes

trapID

Column	Syntax	OID
trapID This value indicates an index of a specific trap	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.11.1.1`
trapVal This value is the actual ASCII description of the trap.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.6.2.11.1.2`
trapTimeSinceOccurrence This value indicates the amount of time passed since the occurrence of the event that trigger this trap.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.6.2.11.1.3`

intSwdlTable

table

.1.3.6.1.4.1.164.6.2.12.10 · 1 row entry · 8 columns

Open in standard view

This parameters table is for 
internal Software down load. It also includes data 
about all files contained in the Object from which 
down-load is performed.

intSwdlEntry entry .1.3.6.1.4.1.164.6.2.12.10.1

An entry in table.

Indexes

intSwdlObjIdx intSwdlFileIdx

Column Syntax OID

intSwdlObjIdx

The index of the object from which down-load is performed.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.12.10.1.1

intSwdlFileIdx

The index of the files included in intSwdlObjIdx.
One of these files can be selected to be internally
downloaded.

SNMPv2-SMIInteger32

Constraints:
range: 1-25

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.12.10.1.2

intSwdlFileName

The name of the file.

SNMPv2-TCDisplayString

Constraints:
range: 1-3

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.6.2.12.10.1.3

intSwdlFileSwVer

The software version of the file.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.6.2.12.10.1.4

intSwdlSwDate

The software version date of the file.

SNMPv2-TCDisplayString

Constraints:
range: 60-300

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.6.2.12.10.1.5

intSwdlSize

The size of the file.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.6.2.12.10.1.6

intSwdlCmd

The command to down-load a SW file to an object.
The Agent will change the value of this MIB object to off(2)
automatically, after accepting the command.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	off
3	on

.1.3.6.1.4.1.164.6.2.12.10.1.7

intSwdlToSubSystem

This object defines the subsystem for download.
Bit='1'- APPLY to respective sub system.
Bit='0'- DO NOT APPLY to respective sub system.
For more details see product specification.
For every octet bit0=LSB, bit7=MSB

OctetStringr/w

.1.3.6.1.4.1.164.6.2.12.10.1.8

swdlStatusTable

table

.1.3.6.1.4.1.164.6.2.12.11 · 1 row entry · 7 columns

Open in standard view

This parameters table is for software download status. 
It also includes data about the files down-loaded or 
attempted to be down-loaded.

swdlStatusEntry entry .1.3.6.1.4.1.164.6.2.12.11.1

An entry in table.

Indexes

swdlStatusTypeIdx swdlStatusIdx

Column	Syntax	OID
swdlStatusTypeIdx The index of the down-load type (e.g. external (1) or internal (2)).	SNMPv2-SMIInteger32 Constraints: `range: 1-4094` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.12.11.1.1`
swdlStatusIdx The index of the status rows.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.12.11.1.2`
swdlStatusFileName The name of the file.	SNMPv2-TCDisplayString Constraints: `range: 1-255` Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.6.2.12.11.1.3`
swdlStatusSlot The slot of the updated (or attempted to be updated) object.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.6.2.12.11.1.4`
swdlStatusSubSystem The subsystem that updated (or attempted to be updated).	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.6.2.12.11.1.5`
swdlStatusStatus The status of the down load process. Value: Fail (2), OK (3), InProcess (4).	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.12.11.1.6`
swdlStatusTime This MIB parameter indicates the time SW download was finished. The format shuld be YYYY-MM-DD, hh:mm:ss	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.6.2.12.11.1.7`

physicalConnectorTable

table

.1.3.6.1.4.1.164.6.2.15.1 · 1 row entry · 5 columns

Open in standard view

This table includes the connector type of ports or interfaces.

physicalConnectorEntry entry .1.3.6.1.4.1.164.6.2.15.1.1

An entry in table.

Indexes

portIdx

Column Syntax OID

portIdx

This object is an index of the specific port or interface.
For a port, the index will be as agreed between agent and
application.
For an interface, ifIndex may be used.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.1.1.1

physicalConnector

The connector of the port/interface.
other - none of the specified connectors
none - no connector.

Enumeration

Enumerated Values:

1	other
2	v35
3	rs530
4	x21
5	bnc
6	utp
7	aui
8	rs422
9	crossUtp
10	rj45
11	v24
12	g703
13	termBlock3AndRj45
14	terminalBlock3
15	terminalBlock5
16	terminalBlock7
17	db25
18	db15
19	rj45ethernet
20	termBlock5AndRj45
21	db9
22	g703E1
23	g703E1-LTU
24	sc
25	st
26	stl
27	fc
28	tb5w
29	termBlock6AndRj45
30	ethBnc
31	scsi26
32	eth4381
33	twoBnc
34	scsi50
35	twoMiniBnc
36	sf1
37	terminalBlock4
38	sf2
39	db25Balanced
40	v36
41	block4W
42	iripRj45
43	irEthQRj45
44	iripBnc
45	rs530WA
46	v35WA
47	irEthQBnc
48	v35Db25
49	rj11
50	mtrj
51	lc
52	terminalBlock2
53	irEth10s100
54	scsi68
55	sf3
56	fcLH
57	telco50
58	telco64
59	irEthQN
255	none

.1.3.6.1.4.1.164.6.2.15.1.1.2

portOptWaveLength

Wave Length of an Optical interface/port in [nm] and specification if
Laser or not.
notApplicable - for non-optical ports.

Enumeration

Enumerated Values:

1	notApplicable
2	nm850
3	nm1300
4	nm1300Laser
5	nm1550Laser

.1.3.6.1.4.1.164.6.2.15.1.1.3

portOptMode

Laser Mode of an Optical Laser interface/port.
notApplicable - for non-Laser ports.

Enumeration

Enumerated Values:

1	notApplicable
2	singleMode
3	multiMode

.1.3.6.1.4.1.164.6.2.15.1.1.4

portBalance

This object is according to the port Impedance.
For T1 - always balanced.
For E1 - there are different impedance values for balanced
and unbalanced.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	unbalanced
3	balanced

.1.3.6.1.4.1.164.6.2.15.1.1.5

prtSpTable

table

.1.3.6.1.4.1.164.6.2.15.2.1 · 1 row entry · 11 columns

Open in standard view

A table.

prtSpEntry entry .1.3.6.1.4.1.164.6.2.15.2.1.1

Supervisory port parameter table.

Indexes

prtSupervisoryIndex

Column Syntax OID

prtSupervisoryIndex

The SP port index.
For some products, having modules (cards):
The LS byte of the integer is the port index 1..255.
The MS byte is different than 0 only if the port belongs to
a module. In that case it is the module n…

SNMPv2-SMIInteger32

Constraints:
range: 0-253

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.2.1.1.1

prtSupervisoryRate

This attribute indicates the operation rate (speed) of the
port.
auto - automatic rate selection, by the agent.

Enumerationr/w

Enumerated Values:

1	auto
2	s300bps
3	s1200bps
4	s2400bps
5	s4800bps
6	s9600bps
7	s19200bps
8	s38400bps
9	s57600bps
10	s115200bps

.1.3.6.1.4.1.164.6.2.15.2.1.1.2

prtSupervisoryDataBits

This attribute indicates the number of data bits in an async
frame

Enumerationr/w

Enumerated Values:

1	dataBits7
2	dataBits8

Constraints:
range: 0-253

.1.3.6.1.4.1.164.6.2.15.2.1.1.3

prtSupervisoryParity

This attribute indicates the parity mode in an async frame

Enumerationr/w

Enumerated Values:

1	none
2	odd
3	even

Constraints:
range: 0-253

.1.3.6.1.4.1.164.6.2.15.2.1.1.4

prtSupervisoryStopBits

This attribute indicates the parity mode in an async frame.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	stopBits1
3	stopBits1dot5
4	stopBits2

.1.3.6.1.4.1.164.6.2.15.2.1.1.5

prtSupervisoryUsage

This attribute indicates the usage of the SP port.

Enumerationr/w

Enumerated Values:

1	unknown
2	noUse
3	terminal
4	nmsSlip
5	nmsPpp
6	muxSlip
7	muxPpp
8	dialOut

.1.3.6.1.4.1.164.6.2.15.2.1.1.6

prtSupervisoryInterface

This attribute indicates the supervisory port interface.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	dce
3	dte

.1.3.6.1.4.1.164.6.2.15.2.1.1.7

prtSupervisoryCTS

CTS line state.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	on
3	rts
4	dteWait
5	dteIgnore

.1.3.6.1.4.1.164.6.2.15.2.1.1.8

prtSupervisoryDcdDelay

DCD delay in msec.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	d0
3	d10
4	d50
5	d100
6	d200
7	d300

Constraints:
range: 1-168

.1.3.6.1.4.1.164.6.2.15.2.1.1.9

prtSupervisoryDSR

DSR line state.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	on
3	dtr

.1.3.6.1.4.1.164.6.2.15.2.1.1.10

prtSupervisoryRoutProtocol

This attribute indicates the routing protocol of the port.
notApplicable - for DP.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	none
3	proprietary
4	rip2

.1.3.6.1.4.1.164.6.2.15.2.1.1.11

prtPerfTable

table

.1.3.6.1.4.1.164.6.2.15.3.1 · 1 row entry · 10 columns

Open in standard view

This table includes G.826 ports or interfaces.

prtPerfEntry entry .1.3.6.1.4.1.164.6.2.15.3.1.1

An entry in table.

Indexes

prtPerfIdx prtPerfPeriodRef

Column Syntax OID

prtPerfIdx

This object is an index of the specific port or interface.
For a port, the index will be as agreed between agent and
application.
For an interface, ifIndex may be used.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.3.1.1.1

prtPerfPeriodRef

This object is an index that specifies which period of time, the next
5 objects refer to.
currentPeriod - the period since last prtPerfSaveAndResetCmd received or
since Start-up (if no prtPerfSaveAndResetCmd w…

Enumeration

Enumerated Values:

1	currentPeriod
2	lastPeriod

.1.3.6.1.4.1.164.6.2.15.3.1.1.2

prtPerfElapsedTime

Elapsed Time in seconds.
- for prtPerfPeriodRef=currentPeriod:
The period since last prtPerfSaveAndResetCmd received or since Start-up
(if no prtPerfSaveAndResetCmd was received since Start-up) until now.
- for prt…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.3.1.1.3

prtPerfUAS

Number of Unavailable Seconds for the reference period (prtPerfPeriodRef).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.3.1.1.4

prtPerfES

Number of Errored Seconds for the reference period (prtPerfPeriodRef).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.3.1.1.5

prtPerfSES

Number of Severely Errored Seconds for the reference period (prtPerfPeriodRef).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.3.1.1.6

prtPerfBBE

Number of Background Block (or Frame) Errors for the reference period
(prtPerfPeriodRef).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.3.1.1.7

prtPerfBlocksPerSec

Blocks per second (or frames per second) of the port/interface indicated by
portIdx. This object is constant for a certain port/interface.
It is not affected by the prtPerfPeriodRef index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.3.1.1.8

prtPerfTimeTag

Time Tag of Last Period: sysUpTime when last prtPerfSaveAndResetCmd was
executed.
This object is applicable only for prtPerfPeriodRef=lastPeriod.
For prtPerfPeriodRef=currentPeriod, the value will always be 0.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.6.2.15.3.1.1.9

prtPerfSaveAndResetCmd

A command per port/interface, to Save data of Current Period in Last Period
data-set and start a new counting period for Current Period.
This object is applicable only for prtPerfPeriodRef=currentPeriod.
Setting this ob…

Enumerationr/w

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.164.6.2.15.3.1.1.10

prtTestTable

table

.1.3.6.1.4.1.164.6.2.15.4.1 · 1 row entry · 5 columns

Open in standard view

This table includes test data for ports or interfaces.

prtTestEntry entry .1.3.6.1.4.1.164.6.2.15.4.1.1

An entry in table.

Indexes

prtTestIdx

Column Syntax OID

prtTestIdx

This object is an index of the specific port or interface.
For a port, the index will be as agreed between agent and
application.
For an interface, ifIndex may be used.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.4.1.1.1

prtTestCmdAndStatus

Setting this object to a value as detailed further on
(except 0) will initiate a test on the specific port.
The test/s requested will be set according to the respective
bit. The value of this object will be a sum of (…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.4.1.1.2

prtBertCounter

This object indicates the number of BERT errors encountered
during the BERT operation.
It is valid only when BERT (Bit Error Rate Test) is active on the
specific port.
The Counter starts from zero (0) anytime BERT is i…

SNMPv2-SMIInteger32

Constraints:
range: 120-2147483646

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.4.1.1.3

prtTestInitiator

This object indicates who initiated this port's test/s.

Enumeration

Enumerated Values:

1	unknown
2	user
3	remoteUnit
4	dteRouter

Constraints:
range: 500-2147483646

.1.3.6.1.4.1.164.6.2.15.4.1.1.4

prtTestTimeout

This object is applicable only when a single
test is running. It indicates the test
activation timeout in minutes.
When the timeout expires, the test is stopped.
Value of 0 indicates test may run Forever

Integer32r/w

Constraints:
range: 0-4095
range: 10-3600

.1.3.6.1.4.1.164.6.2.15.4.1.1.5

prtParamTable

table

.1.3.6.1.4.1.164.6.2.15.5.1 · 1 row entry · 9 columns

Open in standard view

This table includes general port parameters. The meaning is
different for every product that supports it due to a general
parameter - prtControlCnfg.
          
For ACE2002:
-This table is used as a mechanism to create the next interface index.
The algorithm description: 
The NMS will send the agent the following get command: get(nextIfIndex.index), 
where index=interface on which the new index is dependent on. 
Upon this command the agent will generate and return the new index to the NMS.
- This table is partially supported according to the interface type. 
Upon getNext function the irrelevant parameters will be skipped.

prtParamEntry entry .1.3.6.1.4.1.164.6.2.15.5.1.1

An entry in table.

Indexes

prtParamIdx

Column Syntax OID

prtParamIdx

This object is an index of the specific port or interface.
For a port, the index will be as agreed between agent and
application.
For an interface, ifIndex may be used.

For ACE2002:
This parameter is the…

SNMPv2-SMIInteger32

Constraints:
range: 10-3600

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.5.1.1.1

prtControlCnfg

This object may be used for port RW general parameter/s.
For detailed meaning, see product's spec.
Supported by: PRBi-E3/T3.

For ACE2002:
This parameter will include the value of the new index
generated …

SNMPv2-SMIInteger32r/w

Constraints:
range: 1-100

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.5.1.1.2

prtParamClkSrc

The source of Transmit Clock.
'loopTiming' or 'loopback' indicates that the recovered receive clock
is used as the transmit clock.

'localTiming' or 'internal' indicates that a local clock
source is use…

Enumerationr/w

Enumerated Values:

1	loopTiming
2	localTiming
3	throughTiming
4	adaptive
5	master
6	fallback
255	notApplicable

Constraints:
range: 10-3600

.1.3.6.1.4.1.164.6.2.15.5.1.1.3

prtParamPhantom

Power feeding to another device.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	disable
3	enable

Constraints:
range: 1-100

.1.3.6.1.4.1.164.6.2.15.5.1.1.4

prtParamResetStatsCmd

Reset statistics of the selected port.

Enumerationr/w

Enumerated Values:

2	off
3	on

Constraints:
range: 1-100

.1.3.6.1.4.1.164.6.2.15.5.1.1.5

prtParamLastResetStatsTime

The value of MIB II's sysUpTime object at the last time that
prtParamResetStatsCmd was Set to on(3) for this port.
If prtParamResetStatsCmd was never Set to on(3) since last
re-initialization of the agent, then this…

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.164.6.2.15.5.1.1.6

prtParamInterfaceType

The type of the port.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	e1
3	t1
4	fr
5	hdlc

.1.3.6.1.4.1.164.6.2.15.5.1.1.7

prtParamClearAlarm

Setting this attribute to ON, will enforce a clear
operation on the Port Alarms.
Upon completion, the value will automatically change
to off(2).

Enumerationr/w

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.164.6.2.15.5.1.1.8

prtParamLeds

This entry specifies the LEDs status of the port.
Each led is represented by 4 bits where the first 2 bits
(left) specify the status :
(00=NA, 01=OFF, 10=ON, 11=BLINK),
and the next two bits (right) specify the color :…

OctetString

.1.3.6.1.4.1.164.6.2.15.5.1.1.9

prtIpParamTable

table

.1.3.6.1.4.1.164.6.2.15.6.1 · 1 row entry · 16 columns

Open in standard view

A table - Parameters for IP Ports.

prtIpParamEntry entry .1.3.6.1.4.1.164.6.2.15.6.1.1

An entry in table.

Indexes

prtIpParamConfigIdx prtIpParamSlotIdx prtIpParamIdx

Column Syntax OID

prtIpParamConfigIdx

This object indicates the Configuration number (1..255)
referred.
Value of 255 specifies the TmpCnfg (Scratch).
For products having Agent and Edit configurations,
Write operation for the table entries is allowed only …

SNMPv2-SMIInteger32

Constraints:
range: 10-3600

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.6.1.1.1

prtIpParamSlotIdx

This object indicates a unique number of the slot position
in which the module is inserted.
notApplicable = 255 (for products that don't have slots).

For KM:
kmxMlA (103),
kmxMlB (104).

SNMPv2-SMIInteger32

Constraints:
range: 1-100

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.6.1.1.2

prtIpParamIdx

This object indicates a unique Port Index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.6.1.1.3

prtIpParamHostIP

The host interface IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.6.2.15.6.1.1.4

prtIpParamHostMask

The host interface subnet mask.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.6.2.15.6.1.1.5

prtIpParamDefaultGateway

Default Gateway's IP Address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.6.2.15.6.1.1.6

prtIpParamMediaMode

This object indicates the real Media Mode.

Enumeration

Enumerated Values:

1	notApplicable
2	halfDuplex
3	fullDuplex

.1.3.6.1.4.1.164.6.2.15.6.1.1.7

prtIpParamMediaRate

This object indicates the real Media Rate (Mbps).

Enumeration

Enumerated Values:

1	notApplicable
2	r10Mbps
3	r100Mbps

.1.3.6.1.4.1.164.6.2.15.6.1.1.8

prtIpParamMngVlanSupport

Management VLAN support (Tagging).
no - No support of VLAN Tagging.
yes - 4 VLAN bytes will be added to the frame.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	no
3	yes

.1.3.6.1.4.1.164.6.2.15.6.1.1.9

prtIpParamMngVlanId

Management VLAN ID.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.6.1.1.10

prtIpParamMngVlanPriority

Management VLAN Frame priority.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.6.1.1.11

prtIpParamRingMode

This object indicates If Ring Mode is enabled or not.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	disable
3	enable

Constraints:
range: 600-2147483646

.1.3.6.1.4.1.164.6.2.15.6.1.1.12

prtIpParamProtIpEnable

This object indicates whether a list of Protected IP Addresses
is enabled or not. This object is applicable only if
prtIpParamRingMode=enable.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	disable
3	enable

Constraints:
range: 10-3600

.1.3.6.1.4.1.164.6.2.15.6.1.1.13

prtIpParamTrafficPriority

This object indicates the traffic priority of this port.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	low
3	high

.1.3.6.1.4.1.164.6.2.15.6.1.1.14

prtIpParamRemoteIP

This is the IP Address of the remote device that is connected to the
current device (Point to Point Application). It is used for sending OAM packets
on the LAN to the remote side in order to check that the connection is…

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.6.2.15.6.1.1.15

prtIpParamMaxTxBandwidth

This object shows the Max Bandwidth allowed on the LAN.
Full - means that a Maximum of 100 Mega Byte Rate may go through the LAN.
e1(3) means that the maximum is an E1 rate. t1(4) is for a maximum of a T1 rate.

Enumerationr/w

Enumerated Values:

2	full
3	e1
4	t1

.1.3.6.1.4.1.164.6.2.15.6.1.1.16

prtClkSrcTable

table

.1.3.6.1.4.1.164.6.2.15.7.1 · 1 row entry · 5 columns

Open in standard view

A table - Parameters for  master and fallback 
clock source of ports .

prtClkSrcEntry entry .1.3.6.1.4.1.164.6.2.15.7.1.1

An entry in table.

Indexes

prtClkSrcCnfgIdx prtClkSrcPrtIdx prtClkSrcIdx

Column Syntax OID

prtClkSrcCnfgIdx

This attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.164.6.2.15.7.1.1.1

prtClkSrcPrtIdx

This object indicates a unique Port Index (receiving clock).
Refer to device specification for port Index

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.7.1.1.2

prtClkSrcIdx

An index in the table.
master - refers Master clock parameters
fallback - refers Fallback clock parameters

Enumeration

Enumerated Values:

1	master
2	fallback

.1.3.6.1.4.1.164.6.2.15.7.1.1.3

prtClkSrcMode

This entry indicates the source the nodal timing is
locked to.

Enumerationr/w

Enumerated Values:

2	internal
3	rxClk
255	notApplicable

.1.3.6.1.4.1.164.6.2.15.7.1.1.4

prtClkSrcPrt

This entry is valid only when working in rxClk mode.
It specifies the port from which the clock willl be taken.
Refer to device specification for source port Index

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.7.1.1.5

systemPsTable

table

.1.3.6.1.4.1.164.6.2.25 · 1 row entry · 5 columns

Open in standard view

This table describes the PS types of a device.
Usage of this table is specified in the device's NMS SRS

systemPsEntry entry .1.3.6.1.4.1.164.6.2.25.1

An entry in table.

Indexes

systemPsIndex1 systemPsIndex2

Column Syntax OID

systemPsIndex1

First Index.
In HUBs:
1 = PS-A slot
2 = PS-B slot.
In SA units:
1 = PS1
2 = PS2
Default = 1

SNMPv2-SMIInteger32

Constraints:
range: 8-21

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.25.1.1

systemPsIndex2

Second Index.
In HUBs:
1 always.
In SA units:
1 = Local
2 = Remote
Default = 1.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.25.1.2

systemPsType

The type of PS, for a stand-alone product.
acDc - AC with rj45 DC.
acPF - Power Feeding (phantom) box that is feeding another box by external AC.
dcPF - Power Feeding (phantom) box that is feeding another box by externa…

Enumeration

Enumerated Values:

1	none
2	ac
3	dc
4	acDc
5	acPF
6	dcPF

Constraints:
range: 1-128

.1.3.6.1.4.1.164.6.2.25.1.3

systemPsStatus

The Status of the PS unit.

Enumeration

Enumerated Values:

1	notApplicable
2	failed
3	ok

.1.3.6.1.4.1.164.6.2.25.1.4

systemPsHotSwap

Is PS unit hot swap or fixed.

Enumeration

Enumerated Values:

1	notApplicable
2	fixed
3	hotSwap

Constraints:
range: 1-128

.1.3.6.1.4.1.164.6.2.25.1.5

xcTable

table

.1.3.6.1.4.1.164.6.2.31 · 1 row entry · 12 columns

Open in standard view

Configuration of system cross-connect entries.
The table follows the behavior described in RFC 2515, 
RFC 1604 regarding the creation deletion and modification 
of an entry within the table.

xcEntry entry .1.3.6.1.4.1.164.6.2.31.1

An entry in table.

Indexes

xcIndex xcIfIndex1 xcVpi xcVci xcIfIndex2

Column Syntax OID

xcIndex

Cross Connect Identifier.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.31.1.1

xcIfIndex1

The interface Index from the ifTable, which identify one side
of the connection.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.31.1.2

xcVpi

The VPI value.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.31.1.3

xcVci

The VCI value.

SNMPv2-SMIInteger32

Constraints:
range: 1-64

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.31.1.4

xcIfIndex2

The interface Index from the ifTable, which identifies the other
side of the connection.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.31.1.5

xcRowStatus

This parameter allows NMS to create/delete entries of this table.

SNMPv2-TCRowStatusr/w

Constraints:
range: 8-21

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.6.2.31.1.6

xcDescr

A textual string containing information about the
xc entry.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.6.2.31.1.7

xcAdminStatus

The desired administrative status of this bi-directional
cross-connect.

Enumerationr/w

Enumerated Values:

1	up
2	down

Constraints:
range: 8-21

.1.3.6.1.4.1.164.6.2.31.1.8

xcOperStatus

The operational status of this bi-directional cross-connect.

Enumeration

Enumerated Values:

1	up
2	down
3	unknown

.1.3.6.1.4.1.164.6.2.31.1.9

xcAttachedIfType

This object indicates if the specific VCC is
already attached to any interface, and indicates
the type of the interface.
This object's purpose is to ease the checking to
the NMS.
notApplicable - used for entries that a…

Enumeration

Enumerated Values:

1	notApplicable
2	free
3	routerAtm
4	lis

Constraints:
range: 1-128

.1.3.6.1.4.1.164.6.2.31.1.10

xcInputPriority

This object is the priority, by which the LAN frames will be
internaly sent to the ATM HW. This parameter is applicable if
atmNteMdlInputPriorityMechanism=enabled.

1 - Highest priority. Will be the fir…

Integer32r/w

Constraints:
range: 1-4

.1.3.6.1.4.1.164.6.2.31.1.11

xcBitMapping

This object maps this entry to a bit of an octet string.
For ACE2002 this object maps the LAN VCC to the bit of the
VLAN Port Lists. If the value is '0' then it means that
this VCC is not mapped to a port list or it m…

SNMPv2-SMIInteger32

Constraints:
range: 1-128

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.31.1.12

modlParamTable

table

.1.3.6.1.4.1.164.6.2.32.1.1 · 1 row entry · 4 columns

Open in standard view

This table include parameters for system modules.

modlParamEntry entry .1.3.6.1.4.1.164.6.2.32.1.1.1

An entry in table.

Indexes

modlParamIndex

Column Syntax OID

modlParamIndex

The module index.
The index can be the slot number or any other module index as described
in the specifications of the device.
For Vmux-2100 device, the index will have values of: 1..4 for slots 1..4.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.32.1.1.1.1

modlParamReset

Reset action to be performed on the module.
Set the parameter will be done always to on(3) or factory (4).
After performing the Reset operation, Agent will automatically set the parameter to off(2).

Enumerationr/w

Enumerated Values:

2	off
3	on
4	factory

.1.3.6.1.4.1.164.6.2.32.1.1.1.2

modlParamSwdlStatus

This parameter indicates whatever the swdl is in process or not.

Enumeration

Enumerated Values:

1	notApplicable
2	off
3	inProcess

.1.3.6.1.4.1.164.6.2.32.1.1.1.3

modlParamLeds

This entry specifies the LEDs status of the module.
Each led is represented by 4 bits where the first 2 bits (left) specify the status :
(00=NA, 01=OFF, 10=ON, 11=BLINK),
and the next two bits (right) specify the color…

OctetString

.1.3.6.1.4.1.164.6.2.32.1.1.1.4

ifCreateTable

table

.1.3.6.1.4.1.164.6.2.35.1 · 1 row entry · 6 columns

Open in standard view

The Interface Configuration Table.
This table enables to create inferfaces of Entities.

ifCreateEntry entry .1.3.6.1.4.1.164.6.2.35.1.1

An entry in the Interface Configuration table.

Indexes

ifCreateEntityType ifCreateEntityIdx ifCreateNumber

Column Syntax OID

ifCreateEntityType

This object indicates the Entity Type.

SysIfEntityType

Textual Convention: SysIfEntityType Enumeration

Type Values:

1	other
6	ethernetLan
37	atm
62	fastEther
142	ipForward
200	teLink
209	bridge

.1.3.6.1.4.1.164.6.2.35.1.1.1

ifCreateEntityIdx

This object indicates the Entity Index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.35.1.1.2

ifCreateNumber

This object indicates the Interface Number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.35.1.1.3

ifCreateRowStatus

This object enables the user to
create/delete entries in this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.6.2.35.1.1.4

ifCreateType

This object indicates the Interface Type.

IANAifType-MIBIANAifTyper/w

Constraints:
range: 1-1000

Textual Convention: IANAifType-MIBIANAifType Enumeration

Type Values:

1	other
2	regular1822
3	hdh1822
4	ddnX25
5	rfc877x25
6	ethernetCsmacd
7	iso88023Csmacd
8	iso88024TokenBus
9	iso88025TokenRing
10	iso88026Man
11	starLan
12	proteon10Mbit
13	proteon80Mbit
14	hyperchannel
15	fddi
16	lapb
17	sdlc
18	ds1
19	e1
20	basicISDN
21	primaryISDN
22	propPointToPointSerial
23	ppp
24	softwareLoopback
25	eon
26	ethernet3Mbit
27	nsip
28	slip
29	ultra
30	ds3
31	sip
32	frameRelay
33	rs232
34	para
35	arcnet
36	arcnetPlus
37	atm
38	miox25
39	sonet
40	x25ple
41	iso88022llc
42	localTalk
43	smdsDxi
44	frameRelayService
45	v35
46	hssi
47	hippi
48	modem
49	aal5
50	sonetPath
51	sonetVT
52	smdsIcip
53	propVirtual
54	propMultiplexor
55	ieee80212
56	fibreChannel
57	hippiInterface
58	frameRelayInterconnect
59	aflane8023
60	aflane8025
61	cctEmul
62	fastEther
63	isdn
64	v11
65	v36
66	g703at64k
67	g703at2mb
68	qllc
69	fastEtherFX
70	channel
71	ieee80211
72	ibm370parChan
73	escon
74	dlsw
75	isdns
76	isdnu
77	lapd
78	ipSwitch
79	rsrb
80	atmLogical
81	ds0
82	ds0Bundle
83	bsc
84	async
85	cnr
86	iso88025Dtr
87	eplrs
88	arap
89	propCnls
90	hostPad
91	termPad
92	frameRelayMPI
93	x213
94	adsl
95	radsl
96	sdsl
97	vdsl
98	iso88025CRFPInt
99	myrinet
100	voiceEM
101	voiceFXO
102	voiceFXS
103	voiceEncap
104	voiceOverIp
105	atmDxi
106	atmFuni
107	atmIma
108	pppMultilinkBundle
109	ipOverCdlc
110	ipOverClaw
111	stackToStack
112	virtualIpAddress
113	mpc
114	ipOverAtm
115	iso88025Fiber
116	tdlc
117	gigabitEthernet
118	hdlc
119	lapf
120	v37
121	x25mlp
122	x25huntGroup
123	transpHdlc
124	interleave
125	fast
126	ip
127	docsCableMaclayer
128	docsCableDownstream
129	docsCableUpstream
130	a12MppSwitch
131	tunnel
132	coffee
133	ces
134	atmSubInterface
135	l2vlan
136	l3ipvlan
137	l3ipxvlan
138	digitalPowerline
139	mediaMailOverIp
140	dtm
141	dcn
142	ipForward
143	msdsl
144	ieee1394
145	if-gsn
146	dvbRccMacLayer
147	dvbRccDownstream
148	dvbRccUpstream
149	atmVirtual
150	mplsTunnel
151	srp
152	voiceOverAtm
153	voiceOverFrameRelay
154	idsl
155	compositeLink
156	ss7SigLink
157	propWirelessP2P
158	frForward
159	rfc1483
160	usb
161	ieee8023adLag
162	bgppolicyaccounting
163	frf16MfrBundle
164	h323Gatekeeper
165	h323Proxy
166	mpls
167	mfSigLink
168	hdsl2
169	shdsl
170	ds1FDL
171	pos
172	dvbAsiIn
173	dvbAsiOut
174	plc
175	nfas
176	tr008
177	gr303RDT
178	gr303IDT
179	isup
180	propDocsWirelessMaclayer
181	propDocsWirelessDownstream
182	propDocsWirelessUpstream
183	hiperlan2
184	propBWAp2Mp
185	sonetOverheadChannel
186	digitalWrapperOverheadChannel
187	aal2
188	radioMAC
189	atmRadio
190	imt
191	mvl
192	reachDSL
193	frDlciEndPt
194	atmVciEndPt
195	opticalChannel
196	opticalTransport
197	propAtm
198	voiceOverCable
199	infiniband
200	teLink
201	q2931
202	virtualTg
203	sipTg
204	sipSig
205	docsCableUpstreamChannel
206	econet
207	pon155
208	pon622
209	bridge
210	linegroup
211	voiceEMFGD
212	voiceFGDEANA
213	voiceDID
214	mpegTransport
215	sixToFour
216	gtp
217	pdnEtherLoop1
218	pdnEtherLoop2
219	opticalChannelGroup
220	homepna
221	gfp
222	ciscoISLvlan
223	actelisMetaLOOP
224	fcipLink
225	rpr
226	qam
227	lmp
228	cblVectaStar
229	docsCableMCmtsDownstream
230	adsl2
231	macSecControlledIF
232	macSecUncontrolledIF
233	aviciOpticalEther
234	atmbond
235	voiceFGDOS
236	mocaVersion1
237	ieee80216WMAN
238	adsl2plus
239	dvbRcsMacLayer
240	dvbTdm
241	dvbRcsTdma
242	x86Laps
243	wwanPP
244	wwanPP2
245	voiceEBS
246	ifPwType
247	ilan
248	pip
249	aluELP
250	gpon
251	vdsl2
252	capwapDot11Profile
253	capwapDot11Bss
254	capwapWtpVirtualRadio
255	bits
256	docsCableUpstreamRfPort
257	cableDownstreamRfPort
258	vmwareVirtualNic
259	ieee802154
260	otnOdu
261	otnOtu
262	ifVfiType
263	g9981
264	g9982
265	g9983
266	aluEpon
267	aluEponOnu
268	aluEponPhysicalUni
269	aluEponLogicalLink
270	aluGponOnu
271	aluGponPhysicalUni
272	vmwareNicTeam
277	docsOfdmDownstream
278	docsOfdmaUpstream
279	gfast
280	sdci
281	xboxWireless
282	fastdsl
283	docsCableScte55d1FwdOob
284	docsCableScte55d1RetOob
285	docsCableScte55d2DsOob
286	docsCableScte55d2UsOob
287	docsCableNdf
288	docsCableNdr
289	ptm
290	ghn
291	otnOtsi
292	otnOtuc
293	otnOduc
294	otnOtsig
295	microwaveCarrierTermination
296	microwaveRadioLinkTerminal
297	ieee8021axDrni
298	ax25
299	ieee19061nanocom
300	cpri
301	omni
302	roe
303	p2pOverLan

.1.3.6.1.4.1.164.6.2.35.1.1.5

ifCreateIndex

This object indicates the ifIndex of the created Interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.35.1.1.6

systemOamTable

table

.1.3.6.1.4.1.164.6.2.36.1 · 1 row entry · 3 columns

Open in standard view

The OAM Configuration Table.

systemOamEntry entry .1.3.6.1.4.1.164.6.2.36.1.1

An entry in the OAM table.

Indexes

systemOamCnfgIdx

Column	Syntax	OID
systemOamCnfgIdx This attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.	Integer32 Constraints: `range: 1-255`	`.1.3.6.1.4.1.164.6.2.36.1.1.1`
systemOamFrequency Time in sec. between 2 OAM packets.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.36.1.1.2`
systemOamTimeoutCycles No. of cycles the agent will send OAM packets without receiving a response from the remote device before declaring that the connection to the remote side is down - Time Out.	SNMPv2-SMIInteger32r/w Constraints: `range: 120-2147483646` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.36.1.1.3`

bitMappingTable

table

.1.3.6.1.4.1.164.6.2.38 · 1 row entry · 2 columns

Open in standard view

This table maps bits of an octet string to an interface.
For ACE-2002 this table is used to map bits of VLAN port lists
to LAN VCC's. This table is the opposite view of the xcTable for
xcBitMapping. It is used to ease the bit translation for the NMS.

bitMappingEntry entry .1.3.6.1.4.1.164.6.2.38.1

Each entry in the table describes a correlation of a bit location to
an interface.
For ACE-2002 - Upon creation of a new LAN VCC the agent will add an
entry to this table that will define the bit location for that VCC.

Indexes

bitMappingLocation

Column	Syntax	OID
bitMappingLocation The bit location in an octet string.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.38.1.1`
bitMappingIndex The interface index or any other index that should be mapped.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.38.1.2`

rtrConfigIfTable

table

.1.3.6.1.4.1.164.11.1.1 · 1 row entry · 4 columns

Open in standard view

Table of configured interfaces.

rtrConfigIfEntry entry .1.3.6.1.4.1.164.11.1.1.1

Each entry defines a configured interface.

Indexes

rtrConfigIfIndex

Column Syntax OID

rtrConfigIfIndex

This variable uniquely identifies the interface.
It is used as a cross reference in other system tables

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.164.11.1.1.1.1

rtrConfigIfType

This variable identifies the type of the specific
entry in the rtrDynamicIfConfigTable.
This field is writable only at creation time
(i.e., when value of status is underCreation).

RtrIfConfigTYPEr/w

Textual Convention: RtrIfConfigTYPE Enumeration

Type Values:

1	other
6	ethernetLan
7	iso88023Csmacd
9	tokenRingLan
15	fddi
20	basicISDN
21	primaryISDN
22	propPointToPoint
23	ppp
28	slip
32	frameRelay
33	rs232
37	atm
40	x25ple
45	v35
62	fastEther
69	fastEtherFX
500	virtualNet
1001	cod
1002	backUp
1004	dialUp
1010	b1isdn
1011	b2isdn
1020	ipBcst
1021	ipPtp
1022	ipxRaw
1023	ipxEtType
1024	ipxLlcSap
1025	ipxLlcSnap
1026	ipxPtp
1027	brgUnder
1060	wanDriver
1061	ethernetDriver
1062	tokenRingDriver
1064	fddiDriver
1080	virtualLan
1100	unknown

.1.3.6.1.4.1.164.11.1.1.1.2

rtrConfigIfName

This variable provides a logical name to a specific entry in
rtrConfigIfTable. It is also used in identifying the Driver
interfaces.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 1-3

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.11.1.1.1.3

rtrConfigIfStatus

The status of the ConfigEntry. The choices are those
defined in SNMPv2-TC. Only: active, createAndWait, and destroy
will be used.
active - The conceptual row is available for use by the managed device.
createAndWait -…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.11.1.1.1.4

rtrIfCfgTable

table

.1.3.6.1.4.1.164.11.1.2 · 1 row entry · 7 columns

Open in standard view

Router Interface Configuration Table.

rtrIfCfgEntry entry .1.3.6.1.4.1.164.11.1.2.1

An entry in the Router Interface Configuration Table.

Indexes

rtrIfCfgIndex rtrIfCfgIpAddress

Column Syntax OID

rtrIfCfgIndex

This object indicates the Router Interface Index.
(In some cases it will be equal to the Router Interface ifIndex).

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.1.2.1.1

rtrIfCfgIpAddress

IP Address of the Router Interface.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.1.2.1.2

rtrIfCfgRowStatus

This object enables the user to
create/delete entries of this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.11.1.2.1.3

rtrIfCfgIpMask

IP Mask Address Router Interface.

SNMPv2-SMIIpAddressr/w

Constraints:
range: 256-4294967295

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.1.2.1.4

rtrIfCfgIfIndex

ifIndex of the device interface connected
to this Router Interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.1.2.1.5

rtrIfCfgType

The Router Interface Type.
atm - ATM router interface
lis - Logical IP Subnet router interface.
ethernet - Ethernet router interface.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	atm
3	lis
4	ethernet

Constraints:
range: 8-512

.1.3.6.1.4.1.164.11.1.2.1.6

rtrIfCfgVlanId

The VLAN ID assigned to Tagged frames transmitted
from this Router Interface.
The value inserted should be a defined VLAN.

Q-BRIDGE-MIBVlanIndexr/w

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.164.11.1.2.1.7

rtrIpAddrTable

table

.1.3.6.1.4.1.164.11.2.1 · 1 row entry · 6 columns

Open in standard view

This table is parralel to MIB II IpAddrTable, and is used to
add/delete entries to/from that table. In addition it contains
private objects.

rtrIpAddrEntry entry .1.3.6.1.4.1.164.11.2.1.1

The addressing information for one of this
entity's IP addresses.

Indexes

rtrIpAdEntAddr

Column Syntax OID

rtrIpAdEntAddr

The IP address to which this entry's addressing
information pertains.

SNMPv2-SMIIpAddress

Constraints:
range: 256-4294967295

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.2.1.1.1

rtrIpAdEntIfIndex

The index value which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.2.1.1.2

rtrIpAdEntNetMask

The subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0.

SNMPv2-SMIIpAddressr/w

Constraints:
range: 8-512

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.2.1.1.3

rtrIpAdEntForwardIpBroadcast

This variable controls forwarding of IP (sub)net-directed
broadcasts destined for an attached sub(net).

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.164.11.2.1.1.4

rtrIpAdEntBackupAddr

SNMPv2-SMIIpAddressr/w

Constraints:
range: 8-512

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.2.1.1.5

rtrIpAdEntStatus

The Status variable is used to create and destroy a Ip Addresses.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.11.2.1.1.6

rtrIcmpRdTable

table

.1.3.6.1.4.1.164.11.2.2.2 · 1 row entry · 8 columns

Open in standard view

This table contains ICMP Router Discovery parameters
configurated per IP interface.

rtrIcmpRdEntry entry .1.3.6.1.4.1.164.11.2.2.2.1

The ICMP parameters configurated for IP interface.

Indexes

rtrIcmpRdIpAddr

Column Syntax OID

rtrIcmpRdIpAddr

The IP address to which this entry's information pertains.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.2.2.2.1.1

rtrIcmpRdIpAdvertAddr

The IP destination address to be used for multicast
Router Advertisements sent from the interface. The
only permissible values are the all-systems multicast
address, 224.0.0.1, or the limited-broadcast address,
255.255.…

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.2.2.2.1.2

rtrIcmpRdMaxAdvertInterval

The maximum time allowed between sending multicast
Router Advertisements from the interface, in seconds.
Must be no less than 4 seconds and no greater than 1800
seconds.

Integer32r/w

Constraints:
range: 4-1800

.1.3.6.1.4.1.164.11.2.2.2.1.3

rtrIcmpRdMinAdvertInterval

The minimum time allowed between sending unsolicited
multicast Router Advertisements from the interface, in
seconds. Must be no less than 3 seconds and no greater
than rtrIcmpRdMaxAdvertInterval.
Default: 0.75 * rtrIcm…

Integer32r/w

Constraints:
range: 3-1800

.1.3.6.1.4.1.164.11.2.2.2.1.4

rtrIcmpRdAdvertLifetime

The maximum length of time that the advertised addresses
are to be considered as valid. Must be no less than
rtrIcmpRdMaxAdvertInterval and no greater than 9000 seconds.
Default: 3 * rtrIcmpRdMaxAdvertInterval.

Integer32r/w

Constraints:
range: 4-9000

.1.3.6.1.4.1.164.11.2.2.2.1.5

rtrIcmpRdAdvertise

A flag indicating whether or not the address is to be
advertised.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

Constraints:
range: 8-21

.1.3.6.1.4.1.164.11.2.2.2.1.6

rtrIcmpRdPreferenceLevel

The preferability of the address as a default router
address, relative to other router addresses on the same
subnet.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.2.2.2.1.7

rtrIcmpRdEntStatus

Setting of any value to this object set values of
all fields to the default values.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.2.2.2.1.8

rtrRip2IfConfTable

table

.1.3.6.1.4.1.164.11.2.3.1 · 1 row entry · 3 columns

Open in standard view

This table is an extension of rip2IfConfTable (RFC 1724 ,RIP 2).
It means that every time somebody creates/destroys a row in the
rip2IfConfTable, the same row should be automatically created/destroyed  
in this table.

rtrRip2IfConfEntry entry .1.3.6.1.4.1.164.11.2.3.1.1

An entry in table rtrRip2IfConfTable.

Indexes

rtrRip2IfConfAddress

Column Syntax OID

rtrRip2IfConfAddress

The IP Address of this system on the indicated subnet.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.2.3.1.1.1

rtrRip2IfConfVirtualDis deprecated

This variable defines the virtual number of hops assigned to
the interface specified by rtrIfIpAddrIndex. This enables
fine-tuning of the RIP routing algorithm.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.2.3.1.1.2

rtrRip2IfConfAutoSend deprecated

When set to enable only the default route is sent through
the interface. When set to disable, regular RIPs are sent.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.164.11.2.3.1.1.3

rtrNatIfConfTable

table

.1.3.6.1.4.1.164.11.2.5.1 · 1 row entry · 6 columns

Open in standard view

A list of interfaces which require separate NAT configuration.

rtrNatIfConfEntry entry .1.3.6.1.4.1.164.11.2.5.1.1

A single routing domain in a single subnet.

Indexes

IF-MIBifIndex rtrNatIfVirtualAddress rtrNatIfVirtualMask

Column Syntax OID

rtrNatIfVirtualAddress

The IP Address of the virtual subnet to be translated by the 'NAT box'
attached to this interface.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.2.5.1.1.1

rtrNatIfVirtualMask

The subnet Mask of the virtual subnet.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.2.5.1.1.2

rtrNatIfConfStatus

Writing 'destroy' has the effect of deleting this interface.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.11.2.5.1.1.3

rtrNatIfRealAddress

The IP Address of the real subnet which is used by 'NAT box' for translation.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.2.5.1.1.4

rtrNatIfRealMask

The subnet Mask of the real subnet.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.2.5.1.1.5

rtrNatIfType

NAT type.

static - Translate a specific virtual IP network to a specific real IP
network. TCP, UDP and ICMP sessions originated both in real and
virtual networks will be translated.
d…

Enumerationr/w

Enumerated Values:

1	static
2	dynamic
3	pat
4	transparent

Constraints:
range: 1-64

.1.3.6.1.4.1.164.11.2.5.1.1.6

rtrPatTable

table

.1.3.6.1.4.1.164.11.2.5.2 · 1 row entry · 7 columns

Open in standard view

Port Address Translation (PAT -  single IP NAT) configuration Table.

rtrPatEntry entry .1.3.6.1.4.1.164.11.2.5.2.1

Each entry describe unique mapping between real IP address,
range of ports and protocol, to local (virtual) IP address.
Ports are used in the TCP (rfc793) to name the ends of logical
connections which carry long term c…

Indexes

rtrPatIdx

Column Syntax OID

rtrPatIdx

Running index for PAT table.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.164.11.2.5.2.1.1

rtrPatRealAddress

The real IP Address used for translation

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.2.5.2.1.2

rtrPatVirtualAddress

The virtual IP Address used for translation

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.2.5.2.1.3

rtrPatLowestPort

Lowest Port number for this PAT entry

Integer32r/w

Constraints:
range: 0-65535
range: 8-21

.1.3.6.1.4.1.164.11.2.5.2.1.4

rtrPatHighestPort

Highest Port number for this PAT entry

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.164.11.2.5.2.1.5

rtrPatProtocol

Protocol selected.
This Protocol and port range (lowest port - highest port)
define the application (FTP, Telnet, SMTP etc.).
Protocol enumaration numbers correspond to
IP header 'protocol' field

Enumerationr/w

Enumerated Values:

6	tcp
17	udp

.1.3.6.1.4.1.164.11.2.5.2.1.6

rtrPatStatus

This object enables creating and deleting
entries of the table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.11.2.5.2.1.7

rtrFACSActTable

table

.1.3.6.1.4.1.164.11.5.2 · 1 row entry · 4 columns

Open in standard view

The table of  FACS action.

rtrFACSActEntry entry .1.3.6.1.4.1.164.11.5.2.1

Each rtrFACSActEntry consist of the following parameters

Indexes

rtrFACSActType rtrFACSActIfIndex

Column Syntax OID

rtrFACSActType

This parameter indicates on which FACS Table the FACS
action will preform.

Enumeration

Enumerated Values:

1	tx
2	rx

.1.3.6.1.4.1.164.11.5.2.1.1

rtrFACSActIfIndex

The interface to which this FACS entry is applicable.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.5.2.1.2

rtrFACSAction

The management station that sends a SET request for one of these actions
with indexes rtrFACSType and rtrFACSIfIndex defines the type and the
interface Id for which all FACS statements are to be erased.
If no interfa…

Enumerationr/w

Enumerated Values:

1	none
2	eraseIP
3	eraseDECnet
4	eraseIPX
5	eraseBrg
6	replaceIP
8	replaceIPX
9	replaceBrg
10	backupIP
12	backupIPX
13	backupBrg

.1.3.6.1.4.1.164.11.5.2.1.3

rtrFACSActiveDB

This parameter will point on which Facs DataBase the SNMP agent
read. The Active dataBase is Read Only. The user may change FACS
statements in the temporary DataBase and then write it to the
Active DB.

Enumerationr/w

Enumerated Values:

1	active
2	temporary

.1.3.6.1.4.1.164.11.5.2.1.4

rtrFACSTable

table

.1.3.6.1.4.1.164.11.5.3 · 1 row entry · 14 columns

Open in standard view

The table of  FACS statment.

rtrFACSEntry entry .1.3.6.1.4.1.164.11.5.3.1

Each FACS statment consists of the following parameters

Indexes

rtrFACSIfIndex rtrFACSProtocolType rtrFACSType rtrFACSIndex

Column Syntax OID

rtrFACSIfIndex

The interface to which this FACS entry is applicable.
For applications this variables is always 0.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.5.3.1.1

rtrFACSProtocolType

This parameter define the protocol the Security Access Control
is applicable.

Enumeration

Enumerated Values:

1	ip
2	ipx
3	dec
4	bridge

Constraints:
range: 8-21

.1.3.6.1.4.1.164.11.5.3.1.2

rtrFACSType

The Mode of in which this FACS statement operates.
For applications this variable is always rx(2).

Enumeration

Enumerated Values:

1	tx
2	rx
3	cod

.1.3.6.1.4.1.164.11.5.3.1.3

rtrFACSIndex

Index to the FACS Table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.5.3.1.4

rtrFACSSrcAdd

The size of the octet string will be according to the protocol type
defined in rtrFACSProtocolType.

OctetStringr/w

.1.3.6.1.4.1.164.11.5.3.1.5

rtrFACSSrcAddMask

Source-address mask .

OctetStringr/w

.1.3.6.1.4.1.164.11.5.3.1.6

rtrFACSDesAdd

Destination-address The size of the octet string will be according to the
protocol type define in rtrFACSProtocolType .

OctetStringr/w

Enumerated Values:

1	active
4	createAndGo
6	destroy

.1.3.6.1.4.1.164.11.5.3.1.7

rtrFACSDesAddMask

Destination-address mask .

OctetStringr/w

.1.3.6.1.4.1.164.11.5.3.1.8

rtrFACSOperation

... .

Enumerationr/w

Enumerated Values:

1	block
2	forward
3	permit
4	deny
129	blockAndReport

Constraints:
range: 1-2

.1.3.6.1.4.1.164.11.5.3.1.9

rtrFACSNetFiltering

... .

Enumerationr/w

Enumerated Values:

1	none
2	l2multicast
3	arp
4	icmp
5	ip
6	udp
7	tcp
8	decnet
9	ipx

Constraints:
range: 1-2

.1.3.6.1.4.1.164.11.5.3.1.10

rtrFACSSocketNum

Port/socket number for different applications
0 is default meaning not applicable.
none(1),
ftp(21),
telnet(23),
smtp(25),
tftp(69),
snmp(161),
snmpTrap(162),
rip(520),
sapIPX(1106),
ripIPX(1107)

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.5.3.1.11

rtrFACSMask1Id

Index into RND mask table FACS/COD Type) .

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.5.3.1.12

rtrFACSMask2Id

Index into RND mask table FACS/COD according to
the value of rtrFACSType .

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.5.3.1.13

rtrFACSStatus

The status of a table entry.

Enumerationr/w

Enumerated Values:

1	valid
2	createRequest
3	underCreation
4	invalid

.1.3.6.1.4.1.164.11.5.3.1.14

rtrBridgePortConfigTable

table

.1.3.6.1.4.1.164.11.7.1 · 1 row entry · 3 columns

Open in standard view

Table of the bridge ports

rtrBridgePortConfigEntry entry .1.3.6.1.4.1.164.11.7.1.1

Each entry defines a bridge port

Indexes

rtrBridgePortCIndex

Column Syntax OID

rtrBridgePortCIndex

This is the index of the bridge port. It is the same
as 'dot1dBasePort' of the Bridge MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.7.1.1.1

rtrBridgePortCIf

The config ifIndex the bridge port is sitting on.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.7.1.1.2

rtrBridgePortCStatus

The status of the RtrBridgePortConfigEntry.
Creating and destroying the bridge port is done by this
variable.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.11.7.1.1.3

rtrIfIpTable

table

.1.3.6.1.4.1.164.11.7.3.1 · 1 row entry · 6 columns

Open in standard view

Router interfaces table.

rtrIfIpEntry entry .1.3.6.1.4.1.164.11.7.3.1.1

An entry in table rtrIfIpTable.

Indexes

rtrIfIp

Column Syntax OID

rtrIfIp

IP Address.

SNMPv2-SMIIpAddressr/w

Constraints:
range: 1-32

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.7.3.1.1.1

rtrIfRowStatus

SNMPv2-TCRowStatusr/w

Constraints:
range: 1-3600

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.11.7.3.1.1.2

rtrIfIpMask

IP mask Address.

SNMPv2-SMIIpAddressr/w

Constraints:
range: 1-86400

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.7.3.1.1.3

rtrIfIndex

The ifIndex connection, on which the IP is determined.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.7.3.1.1.4

rtrIfMng

An IP interface might be determined as a management
connection (under the product limitations).

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.164.11.7.3.1.1.5

rtrIfVlanId

The VLAN ID assigned to Tagged frames transmitted
from this port.
The value inserted should be a defined VLAN.

Q-BRIDGE-MIBVlanIndexr/w

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.164.11.7.3.1.1.6

brtrIfTable

table

.1.3.6.1.4.1.164.11.7.3.2 · 1 row entry · 3 columns

Open in standard view

LAN interface table.

brtrIfEntry entry .1.3.6.1.4.1.164.11.7.3.2.1

The entries of this table will be created by agent.

Indexes

brtrIfIndex

Column Syntax OID

brtrIfIndex

The index of the interface (LAN or ATM).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.7.3.2.1.1

brtrIfMode

Connection Mode.

Enumerationr/w

Enumerated Values:

1	bridge
2	router
3	brouter
4	off

.1.3.6.1.4.1.164.11.7.3.2.1.2

brtrIfMaxFrameSize

Frame Max Size.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.7.3.2.1.3

brtrLanIfTable

table

.1.3.6.1.4.1.164.11.7.3.4 · 1 row entry · 7 columns

Open in standard view

LAN interface table.

brtrLanIfEntry entry .1.3.6.1.4.1.164.11.7.3.4.1

The entries of this table will be created by agent .

Indexes

brtrLanIfIndex

Column Syntax OID

brtrLanIfIndex

The index of the LAN entity (physical interface).

SNMPv2-SMIInteger32

Constraints:
range: 1-16777215

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.7.3.4.1.1

brtrLanIpAddress

Host IP address. Applicable for bridge mode connection only.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.7.3.4.1.2

brtrLanIpMask

Host IP Mask. Applicable for bridge mode connection only.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.7.3.4.1.3

brtrLanMaxRateEnable

This parameter determines the HW ability of the LAN
card according to HW.

Enumeration

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.164.11.7.3.4.1.4

brtrLanMaxRate

Max Rate.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.7.3.4.1.5

brtrLanMng

An IP interface might be determined as a management
connection (under the product limitations).

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.164.11.7.3.4.1.6

brtrLanDefaultRouter

Default Router's (Gateway's) IP Address.
For each LAN interface there may be a different Default Router.

SNMPv2-SMIIpAddressr/w

Constraints:
range: 1-16777214

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.7.3.4.1.7

rtrIsdnIfTable

table

.1.3.6.1.4.1.164.11.7.3.5 · 1 row entry · 2 columns

Open in standard view

This table contains ISDN parameters that do not appear in the standard MIBs.

rtrIsdnIfEntry entry .1.3.6.1.4.1.164.11.7.3.5.1

Entries for ISDN parameters that do not appear in the standard MIBs.

Indexes

No indexes recorded

Column	Syntax	OID
rtrIsdnIfMinNumBchans Minimum number of B channels that the ISDN Dialer of the router will use for Dialing out. This parameter will be used for the BOD (Bandwidth On Demand) feature. Dial up on B channels is according to the need of bandwidt…	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.11.7.3.5.1.1`
rtrIsdnIfMaxNumBchans Maximum number of B channels that the ISDN Dialer of the router will use for Dialing out. This parameter will be used for the BOD (Bandwidth On Demand) feature. Dial up on B channels is according to the need of bandwidt…	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.11.7.3.5.1.2`

rtrLcrTable

table

.1.3.6.1.4.1.164.11.7.3.6 · 1 row entry · 4 columns

Open in standard view

Least Cost Routing Table.
The user will be able to set a prefix for an outgoing number
that arrives with a predefined prefix in order to redirect
the number for the LCR process to be achieved.

rtrLcrEntry entry .1.3.6.1.4.1.164.11.7.3.6.1

Least Cost Routing Entry.

Indexes

IF-MIBifIndex rtrLcrOutIfIndex

Column Syntax OID

rtrLcrOutIfIndex

The outgoing interface Number of the current route.
The incoming interface number is the value of ifIndex.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.164.11.7.3.6.1.1

rtrLcrRowStatus

Row Status for adding/destroying rows.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.11.7.3.6.1.2

rtrLcrInPrefix

This prefix is part of the called number existing in the incoming packet.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.11.7.3.6.1.3

rtrLcrOutPrefix

This prefix will be inserted into the outgoing packet.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.11.7.3.6.1.4

rtrConfigTable

table

.1.3.6.1.4.1.164.11.9.1 · 1 row entry · 3 columns

Open in standard view

The Router's Configuration table.

rtrConfigEntry entry .1.3.6.1.4.1.164.11.9.1.1

An entry in the Router's Configuration table.

Indexes

rtrConfigIndex

Column	Syntax	OID
rtrConfigIndex This object indicates the Router's Index.	SNMPv2-SMIInteger32 Constraints: `range: 1-64` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.11.9.1.1.1`
rtrConfigArpAgingTime ARP Aging Time.	SNMPv2-SMIInteger32r/w Constraints: `range: 1-254` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.11.9.1.1.3`
rtrConfigClassifierTosMask This object indicates the Classifier's TOS Mask, as follows: 0x1C for DTR -- rfc795 0x1E for Cisco 0xE0 for Precedence -- rfc795 0xFC for Diffserv Else for Manual .	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.11.9.1.1.5`

rtrFwdTable

table

.1.3.6.1.4.1.164.11.9.3 · 1 row entry · 11 columns

Open in standard view

The Router's Forwarding Table.

rtrFwdEntry entry .1.3.6.1.4.1.164.11.9.3.1

An entry in the Router's Forwarding table.

Indexes

rtrFwdIdx rtrFwdIpAddress rtrFwdIpMask rtrFwdRuleIdx

Column Syntax OID

rtrFwdIdx

This object indicates the Router Index.

SNMPv2-SMIInteger32

Constraints:
range: 1-4095

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.9.3.1.1

rtrFwdIpAddress

This object indicates the Destination IP Address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.9.3.1.2

rtrFwdIpMask

This object indicates the Mask IP address.

SNMPv2-SMIIpAddress

Constraints:
range: 1-65535

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.9.3.1.3

rtrFwdRuleIdx

This object indicates the Rule's Number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.9.3.1.4

rtrFwdRowStatus

This object enables the user to
create/delete entries in this table.

Entry of Type rtrFwdType = staticRouting(3)
are created by the user.
Only this type of entries can be deleted by the user.
…

SNMPv2-TCRowStatusr/w

Constraints:
range: 1-253

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.11.9.3.1.5

rtrFwdNextHop

This object indicates the IP Address of the Next Hop.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.9.3.1.6

rtrFwdIfIndex

This object indicates the Interface Index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.9.3.1.7

rtrFwdType

The type of route. Note that local(3) refers
to a route for which the next hop is the final
destination; remote(4) refers to a route for
which the next hop is not the final destina-
tion.

Routes …

Enumerationr/w

Enumerated Values:

1	other
2	reject
3	local
4	remote

.1.3.6.1.4.1.164.11.9.3.1.8

rtrFwdProto

The routing mechanism via which this route was
learned. Inclusion of values for gateway routing
protocols is not intended to imply that
hosts should support those protocols.

Enumeration

Enumerated Values:

1	other
2	local
3	netmgmt
8	rip
41	lis

.1.3.6.1.4.1.164.11.9.3.1.9

rtrFwdEthQueue

This object indicates the ETH Queue number.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.9.3.1.10

rtrFwdMetric1

The primary routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
rtrFwdProto value. If this metric is not
used, its value should be set to -1.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.9.3.1.11

atmIfDataTable

table

.1.3.6.1.4.1.164.12.2.1.1.1 · 1 row entry · 2 columns

Open in standard view

The ATM interface Data table.

atmIfDataEntry entry .1.3.6.1.4.1.164.12.2.1.1.1.1

An entry in the ATM interface Data table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
atmIfTimeElapsed The number of seconds that have elapsed since the beginning of the near end current error- measurement period.	Integer32 Constraints: `range: 0-899` `range: 1-25`	`.1.3.6.1.4.1.164.12.2.1.1.1.1.1`
atmIfValidIntervals The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complet…	Integer32 Constraints: `range: 0-96` `range: 60-300`	`.1.3.6.1.4.1.164.12.2.1.1.1.1.2`

atmIfCurrentTable

table

.1.3.6.1.4.1.164.12.2.1.1.2 · 1 row entry · 5 columns

Open in standard view

The ATM interface Current table.

atmIfCurrentEntry entry .1.3.6.1.4.1.164.12.2.1.1.2.1

An entry in the ATM interface Current table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
atmIfCurrentTxCells The counter associated with the number of transmitted cells, encountered by an ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 1-7` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.2.1.1`
atmIfCurrentRxCells The counter associated with the number of received cells, encountered by an ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.2.1.2`
atmIfCurrentCorrectedHecs The counter associated with the number of cells with corrected HEC errors, encountered by an ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.2.1.3`
atmIfCurrentUncorrectedHecs The counter associated with the number of cells with uncorrected HEC errors, encountered by an ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 5-86400` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.2.1.4`
atmIfCurrentHecErrorSeconds The counter associated with the number of seconds with HEC errors, encountered by an ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.2.1.5`

atmIfIntervalTable

table

.1.3.6.1.4.1.164.12.2.1.1.3 · 1 row entry · 6 columns

Open in standard view

The ATM interface Interval table.

atmIfIntervalEntry entry .1.3.6.1.4.1.164.12.2.1.1.3.1

An entry in the ATM interface Interval table.

Indexes

IF-MIBifIndex atmIfIntervalNumber

Column	Syntax	OID
atmIfIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.164.12.2.1.1.3.1.1`
atmIfIntervalTxCells The counter associated with the number of transmitted cells , encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.3.1.2`
atmIfIntervalRxCells The counter associated with the number of received cells, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.3.1.3`
atmIfIntervalCorrectedHecs The counter associated with the number of cells with corrected HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.3.1.4`
atmIfIntervalUncorrectedHecs The counter associated with the number of cells with uncorrected HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.3.1.5`
atmIfIntervalHecErrorSeconds The counter associated with the number of seconds with HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 1-4094` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.3.1.6`

aal5VccXTable

table

.1.3.6.1.4.1.164.12.2.1.1.4 · 1 row entry · 3 columns

Open in standard view

This table is an extension to AAL5 VCC Table.

aal5VccXEntry entry .1.3.6.1.4.1.164.12.2.1.1.4.1

This list contains the additional AAL5 VCC
performance parameters and is indexed
by ifIndex values of AAL5 interfaces
and the associated VPI/VCI values.

Indexes

No indexes recorded

Column	Syntax	OID
aal5VccInFrames The number of frames received via this interface.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.4.1.1`
aal5VccOutFrames The total number of frames transmitted out of the interface.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.4.1.2`
aal5VccUnknownProtocolFrames The number of frames that were discarded due to unsupported protocol encapsulation on this VCC.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.4.1.3`

aal5VccCurrentTable

table

.1.3.6.1.4.1.164.12.2.1.1.5 · 1 row entry · 7 columns

Open in standard view

The AAL5 Current table.

aal5VccCurrentEntry entry .1.3.6.1.4.1.164.12.2.1.1.5.1

An entry in the AAL5 Current table.

Indexes

IF-MIBifIndex ATM-MIBaal5VccVpi ATM-MIBaal5VccVci

Column	Syntax	OID
aal5VccCurrentInFrames The counter associated with the number of received frames, encountered by the AAL5 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.5.1.1`
aal5VccCurrentOutFrames The counter associated with the number of transmitted frames, encountered by the AAL5 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.5.1.2`
aal5VccCurrentUnknownProtocolFrames The counter associated with the number of frames that were discarded due to unsupported protocol encapsulation, encountered by the AAL5 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.5.1.3`
aal5VccCurrentCrcErrors The counter associated with the number of AAL5 CPCS PDUs received with CRC-32 errors, encountered by the AAL5 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.5.1.4`
aal5VccCurrentLengthError The counter associated with the number of received frames with length error, encountered by the AAL5 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.5.1.5`
aal5VccCurrentInputCongestionDropped The counter associated with the number of dropped frames due to congestion, encountered by the AAL5 interface on the Receive direction in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.5.1.6`
aal5VccCurrentOutputCongestionDropped The counter associated with the number of dropped frames due to congestion, encountered by the AAL5 interface on the Transmit direction in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.5.1.7`

aal5VccIntervalTable

table

.1.3.6.1.4.1.164.12.2.1.1.6 · 1 row entry · 8 columns

Open in standard view

The AAL5 Interval table.

aal5VccIntervalEntry entry .1.3.6.1.4.1.164.12.2.1.1.6.1

An entry in the AAL5 Interval table.

Indexes

IF-MIBifIndex ATM-MIBaal5VccVpi ATM-MIBaal5VccVci aal5VccIntervalNumber

Column	Syntax	OID
aal5VccIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals exist).	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.164.12.2.1.1.6.1.1`
aal5VccIntervalInFrames The counter associated with the number of received frames, encountered by the AAL5 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 1-2` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.6.1.2`
aal5VccIntervalOutFrames The counter associated with the number of transmitted frames, encountered by the AAL5 interface in in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.6.1.3`
aal5VccIntervalUnknownProtocolFrames The counter associated with the number of frames that were discarded due to unsupported protocol encapsulation, encountered by the AAL5 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.6.1.4`
aal5VccIntervalCrcErrors The counter associated with the number of AAL5 CPCS PDUs received with CRC-32 errors, encountered by the AAL5 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.6.1.5`
aal5VccIntervalLengthError The counter associated with the number of received frames with length error, encountered by the AAL5 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.6.1.6`
aal5VccIntervalInputCongestionDropped The counter associated with the number of dropped frames due to a congestion, encountered by the AAL5 interface on the Receive direction in one of the previous 96, individual 15 minute, intervals	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.6.1.7`
aal5VccIntervalOutputCongestionDropped The counter associated with the number of dropped frames due to a congestion, encountered by the AAL5 interface on the Transmit direction in one of the previous 96, individual 15 minute, intervals	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.6.1.8`

atmVpCurrentTable

table

.1.3.6.1.4.1.164.12.2.1.2.1.1 · 1 row entry · 24 columns

Open in standard view

The ATM VP Current table.

atmVpCurrentEntry entry .1.3.6.1.4.1.164.12.2.1.2.1.1.1

An entry in the ATM VP Current table.

Indexes

IF-MIBifIndex atmVpCurrentVpi

Column	Syntax	OID
atmVpCurrentVpi The VPI of the VPL.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.1`
atmVpCurrentRxCellsClp01 The counter associated with the number of transmitted cells, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.2`
atmVpCurrentRxCellsClp0 The counter associated with the number of received cells, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.3`
atmVpCurrentGcra0Violations The counter associated with the number of cells violating GCRA0, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.4`
atmVpCurrentGcra1Violations The counter associated with the number of cells violating GCRA1, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.5`
atmVpCurrentRxAIS The counter associated with the number of received AIS cells, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.6`
atmVpCurrentTxAIS The counter associated with the number of transmitted AIS cells, encountered by the VPL of this ATM interface in the current 15 minute interval. Not Supported in the first phase.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.7`
atmVpCurrentRxRDI The counter associated with the number of received RDI cells, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.8`
atmVpCurrentTxRDI The counter associated with the number of transmitted RDI cells, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.9`
atmVpCurrentContinuityLoss The counter associated with the number of loss of continuity cells, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.10`
atmVpCurrentUAS The counter associated with the number of Unavailable Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.11`
atmVpCurrentSES The counter associated with the number of Severerly Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.12`
atmVpCurrentCDC Amount of cells dropped in the current 15 minute interval of the VP connection.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.13`
atmVpCurrentTotalDiscards The total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.14`
atmVpCurrentClp0Discards The total number of valid ATM cells received with CLP=0 and discarded by the traffic policing entity.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.15`
atmVpCurrentTotalCellOuts The total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.16`
atmVpCurrentClp0CellOuts The total number of valid ATM cells transmitted with CLP=0 by this VPL.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.17`
atmVpCurrentTaggedOuts The total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.18`
atmVpCurrentPCR The maximum traffic rate encountered in the last interval of the VP connection (monitored once a second).	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.19`
atmVpCurrentSCR The average traffic rate during the last interval of the VP connection.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.20`
atmVpCurrentMCR MCR - The minimum traffic rate encountered in the last interval of the VP connection (monitored once a second).	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.21`
atmVpCurrentShaperTotalDiscards The total number of cells (CLP0 and CLP1) discarded due to congestion by the traffic shaper.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.22`
atmVpCurrentShaperClp0Discards The total number of CLP0 cells discarded due to congestion by the traffic shaper.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.23`
atmVpCurrentShaperClp1Discards The total number of CLP1 cells discarded due to congestion by the traffic shaper.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.1.1.24`

atmVpPMCurrentTable

table

.1.3.6.1.4.1.164.12.2.1.2.1.2 · 1 row entry · 16 columns

Open in standard view

The ATM VP Current table for Performance Management.

atmVpPMCurrentEntry entry .1.3.6.1.4.1.164.12.2.1.2.1.2.1

An entry in the ATM VP Current table for Performance
Management.

Indexes

IF-MIBifIndex atmVpPMCurrentVpi atmVpPMCurrentDir

Column Syntax OID

atmVpPMCurrentVpi

The VPI of the VPL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.1.2.1.1

atmVpPMCurrentDir

The direction of performance management.

Enumeration

Enumerated Values:

2	forward
3	backward

.1.3.6.1.4.1.164.12.2.1.2.1.2.1.2

atmVpPMCurrentTxClp01

The counter associated with the number of transmitted
CLP 0+1 cells, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.2.1.3

atmVpPMCurrentTxClp0

The counter associated with the number of transmitted
CLP 0 cells, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.2.1.4

atmVpPMCurrentRxClp01

The counter associated with the number of received
CLP 0+1 cells, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.2.1.5

atmVpPMCurrentRxClp0

The counter associated with the number of received
CLP 0 cells, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.2.1.6

atmVpPMCurrentErroredCells

The counter associated with the number of errored
cells, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.2.1.7

atmVpPMCurrentLostCells

The counter associated with the number of lost
cells, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.2.1.8

atmVpPMCurrentMisinsertedCells

The counter associated with the number of misinserted
cells, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Constraints:
range: 64-64

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.2.1.9

atmVpPMCurrentECB

The counter associated with the number of ECB,
encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Constraints:
range: 64-64

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.2.1.10

atmVpPMCurrentSECB

The counter associated with the number of SECB,
encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.2.1.11

atmVpPMCurrentES

The counter associated with the number of
Errored Seconds, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.2.1.12

atmVpPMCurrentSES

The counter associated with the number of Severely
Errored Seconds, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.2.1.13

atmVpPMCurrentUAS

The counter associated with the number of Unavailable
Seconds, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.2.1.14

atmVpPMCurrentIntervalQuality

If the number of errors per interval is superior to
the atmNteUPLTCR value, the quality of service of
the interval is declared as unacceptable.

Enumeration

Enumerated Values:

2	normal
3	unacceptable

Constraints:
range: 0-0
range: 5-3600

.1.3.6.1.4.1.164.12.2.1.2.1.2.1.15

atmVpPMCurrentLastDayQuality

If the number of errors per 24 hours is superior to
the atmNteDPLTCR value, the quality of service of
the day is declared as degraded.

Enumeration

Enumerated Values:

2	normal
4	degraded

Constraints:
range: 1-4094

.1.3.6.1.4.1.164.12.2.1.2.1.2.1.16

atmVpIntervalTable

table

.1.3.6.1.4.1.164.12.2.1.2.1.3 · 1 row entry · 25 columns

Open in standard view

The ATM Vp Interval table.

atmVpIntervalEntry entry .1.3.6.1.4.1.164.12.2.1.2.1.3.1

An entry in the ATM Vp Interval table.

Indexes

IF-MIBifIndex atmVpIntervalVpi atmVpIntervalNumber

Column	Syntax	OID
atmVpIntervalVpi The VPI of the VPL.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.1`
atmVpIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.2`
atmVpIntervalRxCellsClp01 The counter associated with the number of transmitted cells , encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 1-3` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.3`
atmVpIntervalRxCellsClp0 The counter associated with the number of received cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.4`
atmVpIntervalGcra0Violations The counter associated with the number of cells violating GCRA0, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 1-65535` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.5`
atmVpIntervalGcra1Violations The counter associated with the number of cells violating GCRA1, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.6`
atmVpIntervalRxAIS The counter associated with the number of received AIS cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.7`
atmVpIntervalTxAIS The counter associated with the number of transmitted AIS cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals. Not supported in the first phase.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.8`
atmVpIntervalRxRDI The counter associated with the number of received RDI cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 1-32` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.9`
atmVpIntervalTxRDI The counter associated with the number of transmitted RDI cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.10`
atmVpIntervalContinuityLoss The counter associated with the number of Continuity Loss cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.11`
atmVpIntervalUAS The counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.12`
atmVpIntervalSES The counter associated with the number of Severerly Errored Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.13`
atmVpIntervalCDC Amount of cells dropped in the 15 minute interval of the VP connection.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.14`
atmVpIntervalTotalDiscards The total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.	SNMPv2-SMIGauge32 Constraints: `range: 1-4094` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.15`
atmVpIntervalClp0Discards The total number of valid ATM cells received with CLP=0 an discarded by the traffic policing entity.	SNMPv2-SMIGauge32 Constraints: `range: 0-8192` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.16`
atmVpIntervalTotalCellOuts The total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.17`
atmVpIntervalClp0CellOuts The total number of valid ATM cells transmitted with CLP=0 by this VPL.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.18`
atmVpIntervalTaggedOuts The total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.	SNMPv2-SMIGauge32 Constraints: `range: 1-2` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.19`
atmVpIntervalPCR The maximum traffic rate encountered in the last interval of the VP connection (monitored once a second) encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 5-86640` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.20`
atmVpIntervalSCR The average traffic rate during the last interval of the VP connection , encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 3-100` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.21`
atmVpIntervalMCR MCR - The minimum traffic rate encountered in the last interval of the VP connection (monitored once a second) encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.22`
atmVpIntervalShaperTotalDiscards The total number of cells (CLP0 and CLP1) discarded due to congestion by the traffic shaper.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.23`
atmVpIntervalShaperClp0Discards The total number of CLP0 cells discarded due to congestion by the traffic shaper.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.24`
atmVpIntervalShaperClp1Discards The total number of CLP1 cells discarded due to congestion by the traffic shaper.	SNMPv2-SMIGauge32 Constraints: `range: 64-64` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.3.1.25`

atmVpPMIntervalTable

table

.1.3.6.1.4.1.164.12.2.1.2.1.4 · 1 row entry · 17 columns

Open in standard view

The ATM Vp Interval table for Performance Management.

atmVpPMIntervalEntry entry .1.3.6.1.4.1.164.12.2.1.2.1.4.1

An entry in the ATM Vp Interval table for Performance
Management.

Indexes

IF-MIBifIndex atmVpPMIntervalVpi atmVpPMIntervalDir atmVpPMIntervalNumber

Column Syntax OID

atmVpPMIntervalVpi

The VPI of the VPL.

SNMPv2-SMIInteger32

Constraints:
range: 0-3

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.1

atmVpPMIntervalDir

The direction of performance management.

Enumeration

Enumerated Values:

2	forward
3	backward

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.2

atmVpPMIntervalNumber

A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes interval
(assuming that all 96 intervals are valid).

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.3

atmVpPMIntervalTxClp01

The counter associated with the number of transmitted
CLP 0+1 cells, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Constraints:
range: 1-32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.4

atmVpPMIntervalTxClp0

The counter associated with the number of transmitted
CLP 0 cells, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Constraints:
range: 1-32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.5

atmVpPMIntervalRxClp01

The counter associated with the number of received
CLP 0+1 cells, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Constraints:
range: 1-32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.6

atmVpPMIntervalRxClp0

The counter associated with the number of received
CLP 0 cells, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.7

atmVpPMIntervalErroredCells

The counter associated with the number of Errored
cells, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.8

atmVpPMIntervalLostCells

The counter associated with the number of Lost
cells, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.9

atmVpPMIntervalMisinsertedCells

The counter associated with the number of Misinserted
cells, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.10

atmVpPMIntervalECB

The counter associated with the number of ECBs
encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.11

atmVpPMIntervalSECB

The counter associated with the number of SECBs
encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.12

atmVpPMIntervalES

The counter associated with the number of Errored
Seconds, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.13

atmVpPMIntervalSES

The counter associated with the number of Severely
Errored Seconds, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.14

atmVpPMIntervalUAS

The counter associated with the number of Unavailable
Seconds, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.15

atmVpPMIntervalQuality

If the number of errors per interval is superior to
the atmNteUPLTCR value, the quality of service of
the interval is declared as unacceptable.

Enumeration

Enumerated Values:

2	normal
3	unacceptable

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.16

atmVpPMIntervalLastDayQuality

If the number of errors per 24 hours is superior to
the atmNteDPLTCR value, the quality of service of
the day is declared as degraded.

Enumeration

Enumerated Values:

2	normal
4	degraded

.1.3.6.1.4.1.164.12.2.1.2.1.4.1.17

atmVpQoSTable

table

.1.3.6.1.4.1.164.12.2.1.2.1.5 · 1 row entry · 3 columns

Open in standard view

The VP QoS table.

atmVpQoSEntry entry .1.3.6.1.4.1.164.12.2.1.2.1.5.1

Indexes

IF-MIBifIndex ATM-MIBatmVplVpi atmVpQoSPeriodRef

Column Syntax OID

atmVpQoSPeriodRef

This object is an index that specifies which period of time, the next
2 objects refer to.
currentPeriod - the period since last systemResetAllStatsCmd received or
since Start-up (if no systemResetAllSta…

Enumeration

Enumerated Values:

1	currentPeriod
2	lastPeriod

.1.3.6.1.4.1.164.12.2.1.2.1.5.1.1

atmVpQoSElapsedTime

Elapsed Time in seconds.
- for atmVpQoSPeriodRef = currentPeriod:
The period since last systemResetAllStatsCmd received or since Start-up
(if no systemResetAllStatsCmd was received since Start-up) until now.
- for …

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.1.5.1.2

atmVpQoSUAS

Number of Unavailable Seconds for the reference period (atmVpQoSPeriodRef).

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.5.1.3

atmVpPMQoSTable

table

.1.3.6.1.4.1.164.12.2.1.2.1.6 · 1 row entry · 5 columns

Open in standard view

The PM VP QoS table.

atmVpPMQoSEntry entry .1.3.6.1.4.1.164.12.2.1.2.1.6.1

Indexes

IF-MIBifIndex ATM-MIBatmVplVpi atmVpPMQoSDirection atmVpPMQoSPeriodRef

Column Syntax OID

atmVpPMQoSDirection

The direction of performance management.

Enumeration

Enumerated Values:

2	forward
3	backward

.1.3.6.1.4.1.164.12.2.1.2.1.6.1.1

atmVpPMQoSPeriodRef

This object is an index that specifies which period of time, the next
5 objects refer to.
currentPeriod - the period since last systemResetAllStatsCmd received or
since Start-up (if no systemResetAllStat…

Enumeration

Enumerated Values:

1	currentPeriod
2	lastPeriod

.1.3.6.1.4.1.164.12.2.1.2.1.6.1.2

atmVpPMQoSCLR

Cell Loss Ratio counter for the reference period (atmVpPMQoSPeriodRef)-
defined in accordance with I.356 , in %.
The value will be multipuled by 100.

SNMPv2-SMIGauge32

Constraints:
range: 1-4094

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.6.1.3

atmVpPMQoSCER

Cell Error Ratio counter for the reference period (atmVpPMQoSPeriodRef)
defined in accordance with I.356 , in %.
The value will be multipuled by 100.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.6.1.4

atmVpPMQoSCMR

Cell Misinsertion Ratio counter for the reference period (atmVpPMQoSPeriodRef)
defined in accordance with I.356 , cells/sec .

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.6.1.5

atmVpShaperStatTable

table

.1.3.6.1.4.1.164.12.2.1.2.1.7 · 1 row entry · 6 columns

Open in standard view

The ATM VP shaper statistics table.

atmVpShaperStatEntry entry .1.3.6.1.4.1.164.12.2.1.2.1.7.1

An entry in the ATM VP shaper statistics table.

Indexes

IF-MIBifIndex ATM-MIBatmVplVpi

Column Syntax OID

atmVpShaperDiscarded

The number of Cells that were discarded in the shaper on that VPC due
to buffer overflow.
This counter counts till it reaches its MAX value (20 bits) and then
rolls over.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.7.1.1

atmVpShaperOccupation

The number of Cells that are currently stored in the buffer.
This parameter is limited to 20 bits.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.1.7.1.2

atmVpShaperMaxOccupation

The Maximum number of Cells that were stored in the buffer,
since this VP was activated. This parameter is limited to 20 bits.

SNMPv2-SMIInteger32

Constraints:
range: 1-5

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.1.7.1.3

atmVpShaperLevel

The occupation of the buffer according to a predefined threshold.
empty - buffer is Empty
full - buffer is Full
below - buffer is Below the threshold
above - buffer is Above the threshold. This is also the trigger to …

Enumeration

Enumerated Values:

1	empty
2	full
3	below
4	above

.1.3.6.1.4.1.164.12.2.1.2.1.7.1.4

atmVpShaperEpdDropped

The number of Cells that were dropped in the shaper on that VPC
due to EPD\PPD mechanism in the last second.
This parameter is limited to 24 bits.
Applicable for a EPD/PPD VP only.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.7.1.5

atmVpShaperTotalEpdDropped

The Total number of Cells that were dropped in the shaper on that
VPC due to EPD\PPD mechanism in the last 15 minutes. This counter
automatically reset itself every 15 minutes.
Applicable for a EPD/PPD VP only.

SNMPv2-SMICounter32

Constraints:
range: 0-40

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.7.1.6

atmVcCurrentTable

table

.1.3.6.1.4.1.164.12.2.1.2.2.1 · 1 row entry · 25 columns

Open in standard view

The ATM VC Current table.

atmVcCurrentEntry entry .1.3.6.1.4.1.164.12.2.1.2.2.1.1

An entry in the ATM VC Current table.

Indexes

IF-MIBifIndex atmVcCurrentVpi atmVcCurrentVci

Column	Syntax	OID
atmVcCurrentVpi The VPI of the VCL.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.1`
atmVcCurrentVci The VCI of the VCL.	SNMPv2-SMIInteger32 Constraints: `range: 1-32` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.2`
atmVcCurrentRxCellsClp01 The counter associated with the number of transmitted cells, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.3`
atmVcCurrentRxCellsClp0 The counter associated with the number of received cells, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.4`
atmVcCurrentGcra0Violations The counter associated with the number of cells violating GCRA0, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.5`
atmVcCurrentGcra1Violations The counter associated with the number of cells violating GCRA1, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.6`
atmVcCurrentRxAIS The counter associated with the number of received AIS cells, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.7`
atmVcCurrentTxAIS The counter associated with the number of transmitted AIS cells, encountered by the VCL of this ATM interface in the current 15 minute interval. Not Supported in the first phase.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.8`
atmVcCurrentRxRDI The counter associated with the number of received RDI cells, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.9`
atmVcCurrentTxRDI The counter associated with the number of transmitted RDI cells, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.10`
atmVcCurrentContinuityLoss The counter associated with the number of loss of continuity cells, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 1-4094` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.11`
atmVcCurrentUAS The counter associated with the number of Unavailable Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.12`
atmVcCurrentSES The counter associated with the number of Severerly Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.13`
atmVcCurrentCDC Amount of cells dropped in the current 15 minute interval of the VC connection.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.14`
atmVcCurrentTotalDiscards The total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.15`
atmVcCurrentClp0Discards The total number of valid ATM cells received with CLP=0 an discarded by the traffic policing entity.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.16`
atmVcCurrentTotalCellOuts The total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.17`
atmVcCurrentClp0CellOuts The total number of valid ATM cells transmitted with CLP=0 by this VPL.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.18`
atmVcCurrentTaggedOuts The total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.19`
atmVcCurrentPCR The maximum traffic rate encountered in the last interval of the VC connection (monitored once a second).	SNMPv2-SMIGauge32 Constraints: `range: 0-27` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.20`
atmVcCurrentSCR The average traffic rate during the last interval of the VC connection.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.21`
atmVcCurrentMCR MCR - The minimum traffic rate encountered in the last interval of the VC connection (monitored once a second).	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.22`
atmVcCurrentShaperTotalDiscards The total number of cells (CLP0 and CLP1) discarded due to congestion by the traffic shaper.	SNMPv2-SMIGauge32 Constraints: `range: 1-2347` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.23`
atmVcCurrentShaperClp0Discards The total number of CLP0 cells discarded due to congestion by the traffic shaper.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.24`
atmVcCurrentShaperClp1Discards The total number of CLP1 cells discarded due to congestion by the traffic shaper.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.1.1.25`

atmVcPMCurrentTable

table

.1.3.6.1.4.1.164.12.2.1.2.2.2 · 1 row entry · 17 columns

Open in standard view

The ATM VC Current table for Performance Management.

atmVcPMCurrentEntry entry .1.3.6.1.4.1.164.12.2.1.2.2.2.1

An entry in the ATM VC Current table for Performance
Management.

Indexes

IF-MIBifIndex atmVcPMCurrentVpi atmVcPMCurrentVci atmVcPMCurrentDir

Column Syntax OID

atmVcPMCurrentVpi

The VPI of the VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.1

atmVcPMCurrentVci

The VCI of the VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.2

atmVcPMCurrentDir

The direction of Performance Management.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.3

atmVcPMCurrentTxClp01

The counter associated with the number of transmitted
CLP 0+1 cells, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Constraints:
range: 0-65535

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.4

atmVcPMCurrentTxClp0

The counter associated with the number of transmitted
CLP 0 cells, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.5

atmVcPMCurrentRxClp01

The counter associated with the number of received
CLP 0+1 cells, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.6

atmVcPMCurrentRxClp0

The counter associated with the number of received
CLP 0 cells, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.7

atmVcPMCurrentErroredCells

The counter associated with the number of errored
cells, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.8

atmVcPMCurrentLostCells

The counter associated with the number of lost
cells, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.9

atmVcPMCurrentMisinsertedCells

The counter associated with the number of misinserted
cells, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.10

atmVcPMCurrentECB

The counter associated with the number of ECBs
encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.11

atmVcPMCurrentSECB

The counter associated with the number of SECBs
encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.12

atmVcPMCurrentES

The counter associated with the number of
Errored Seconds, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Constraints:
range: 1-6

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.13

atmVcPMCurrentSES

The counter associated with the number of Severely
Errored Seconds, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.14

atmVcPMCurrentUAS

The counter associated with the number of Severely
Errored Seconds, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.15

atmVcPMCurrentIntervalQuality

If the number of errors per interval is superior to
the atmNteUPLTCR value, the quality of service of
the interval is declared as unacceptable.

Enumeration

Enumerated Values:

2	normal
3	unacceptable

Constraints:
range: 0-256

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.16

atmVcPMCurrentLastDayQuality

If the number of errors per 24 hours is superior to
the atmNteDPLTCR value, the quality of service of
the day is declared as degraded.

Enumeration

Enumerated Values:

2	normal
4	degraded

.1.3.6.1.4.1.164.12.2.1.2.2.2.1.17

atmVcIntervalTable

table

.1.3.6.1.4.1.164.12.2.1.2.2.3 · 1 row entry · 26 columns

Open in standard view

The ATM Vc Interval table.

atmVcIntervalEntry entry .1.3.6.1.4.1.164.12.2.1.2.2.3.1

An entry in the ATM Vc Interval table.

Indexes

IF-MIBifIndex atmVcIntervalVpi atmVcIntervalVci atmVcIntervalNumber

Column	Syntax	OID
atmVcIntervalVpi The VPI of the VCL.	SNMPv2-SMIInteger32 Constraints: `range: 0-10` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.1`
atmVcIntervalVci The VCI of the VCL.	SNMPv2-SMIInteger32 Constraints: `range: 1-255` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.2`
atmVcIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32 Constraints: `range: 1-96` `range: 1-1000`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.3`
atmVcIntervalRxCellsClp01 The counter associated with the number of transmitted cells , encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.4`
atmVcIntervalRxCellsClp0 The counter associated with the number of received cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.5`
atmVcIntervalGcra0Violations The counter associated with the number of cells violating GCRA0, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.6`
atmVcIntervalGcra1Violations The counter associated with the number of cells violating GCRA1, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.7`
atmVcIntervalRxAIS The counter associated with the number of received AIS cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.8`
atmVcIntervalTxAIS The counter associated with the number of transmitted AIS cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals. Not supported in the first phase.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.9`
atmVcIntervalRxRDI The counter associated with the number of received RDI cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.10`
atmVcIntervalTxRDI The counter associated with the number of transmitted RDI cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 1-8` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.11`
atmVcIntervalContinuityLoss The counter associated with the number of Continuity Loss cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.12`
atmVcIntervalUAS The counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.13`
atmVcIntervalSES The counter associated with the number of Severerly Errored Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.14`
atmVcIntervalCDC Amount of cells dropped in the 15 minute interval of the VC connection.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.15`
atmVcIntervalTotalDiscards The total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.16`
atmVcIntervalClp0Discards The total number of valid ATM cells received with CLP=0 an discarded by the traffic policing entity.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.17`
atmVcIntervalTotalCellOuts The total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.18`
atmVcIntervalClp0CellOuts The total number of valid ATM cells transmitted with CLP=0 by this VPL.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.19`
atmVcIntervalTaggedOuts The total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.20`
atmVcIntervalPCR The maximum traffic rate encountered in the last interval of the VC connection (monitored once a second) encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: `range: 0-3` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.21`
atmVcIntervalSCR The average traffic rate during the last interval of the VC connection, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.22`
atmVcIntervalMCR MCR - The minimum traffic rate encountered in the last interval of the VC connection (monitored once a second) encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.23`
atmVcIntervalShaperTotalDiscards The total number of cells (CLP0 and CLP1) discarded due to congestion by the traffic shaper.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.24`
atmVcIntervalShaperClp0Discards The total number of CLP0 cells discarded due to congestion by the traffic shaper.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.25`
atmVcIntervalShaperClp1Discards The total number of CLP1 cells discarded due to congestion by the traffic shaper.	SNMPv2-SMIGauge32 Constraints: `range: 1-8` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.3.1.26`

atmVcPMIntervalTable

table

.1.3.6.1.4.1.164.12.2.1.2.2.4 · 1 row entry · 18 columns

Open in standard view

The ATM Vc Interval table for Performance Management.

atmVcPMIntervalEntry entry .1.3.6.1.4.1.164.12.2.1.2.2.4.1

An entry in the ATM Vc Interval table for Performance
Management.

Indexes

IF-MIBifIndex atmVcPMIntervalVpi atmVcPMIntervalVci atmVcPMIntervalDir atmVcPMIntervalNumber

Column Syntax OID

atmVcPMIntervalVpi

The VPI of the VCL.

SNMPv2-SMIInteger32

Constraints:
range: 1-10000000

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.1

atmVcPMIntervalVci

The VCI of the VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.2

atmVcPMIntervalDir

The direction of Performance Management.

Enumeration

Enumerated Values:

2	forward
3	backward

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.3

atmVcPMIntervalNumber

A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes interval
(assuming that all 96 intervals are valid).

Integer32

Constraints:
range: 1-96
range: 1-255

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.4

atmVcPMIntervalTxClp01

The counter associated with the number of transmitted
CLP 0+1 cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.5

atmVcPMIntervalTxClp0

The counter associated with the number of transmitted
CLP 0 cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.6

atmVcPMIntervalRxClp01

The counter associated with the number of received
CLP 0+1 cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.7

atmVcPMIntervalRxClp0

The counter associated with the number of received
CLP 0 cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.8

atmVcPMIntervalErroredCells

The counter associated with the number of Errored
cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Constraints:
range: 1-65535

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.9

atmVcPMIntervalLostCells

The counter associated with the number of Lost
cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.10

atmVcPMIntervalMisinsertedCells

The counter associated with the number of Misinserted
cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Constraints:
range: 0-64

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.11

atmVcPMIntervalECB

The counter associated with the number of ECBs
encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Constraints:
range: 0-64

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.12

atmVcPMIntervalSECB

The counter associated with the number of SECBs
encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Constraints:
range: 0-128

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.13

atmVcPMIntervalES

The counter associated with the number of Errored
Seconds, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Constraints:
range: 1-4094

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.14

atmVcPMIntervalSES

The counter associated with the number of Severely
Errored Seconds, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Constraints:
range: 500-1492

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.15

atmVcPMIntervalUAS

The counter associated with the number of Unavailable
Seconds, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Constraints:
range: 1-8000

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.16

atmVcPMIntervalQuality

If the number of errors per interval is superior to
the atmNteUPLTCR value, the quality of service of
the interval is declared as unacceptable.

Enumeration

Enumerated Values:

2	normal
3	unacceptable

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.17

atmVcPMIntervalLastDayQuality

If the number of errors per 24 hours is superior to
the atmNteDPLTCR value, the quality of service of
the day is declared as degraded.

Enumeration

Enumerated Values:

2	normal
4	degraded

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.18

atmVcQoSTable

table

.1.3.6.1.4.1.164.12.2.1.2.2.6 · 1 row entry · 3 columns

Open in standard view

The ATM VP QoS table.

atmVcQoSEntry entry .1.3.6.1.4.1.164.12.2.1.2.2.6.1

An entry in the ATM VP table.

Indexes

IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci atmVcQoSPeriodRef

Column Syntax OID

atmVcQoSPeriodRef

Enumeration

Enumerated Values:

1	currentPeriod
2	lastPeriod

.1.3.6.1.4.1.164.12.2.1.2.2.6.1.1

atmVcQoSElapsedTime

Elapsed Time in seconds.
- for atmVcQoSPeriodRef = currentPeriod:
The period since last systemResetAllStatsCmd received or since Start-up
(if no systemResetAllStatsCmd was received since Start-up) until now.
- for …

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.2.6.1.2

atmVcQoSUAS

Number of Unavailable Seconds for the reference period (atmVcQoSPeriodRef).

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.6.1.3

atmVcPMQoSTable

table

.1.3.6.1.4.1.164.12.2.1.2.2.7 · 1 row entry · 5 columns

Open in standard view

The PM VC QoS table.

atmVcPMQoSEntry entry .1.3.6.1.4.1.164.12.2.1.2.2.7.1

An entry in the VC PM QoS table.

Indexes

IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci atmVcPMQoSDirection atmVcPMQoSPeriodRef

Column Syntax OID

atmVcPMQoSDirection

The direction of performance management.

Enumeration

Enumerated Values:

2	forward
3	backward

.1.3.6.1.4.1.164.12.2.1.2.2.7.1.1

atmVcPMQoSPeriodRef

Enumeration

Enumerated Values:

1	currentPeriod
2	lastPeriod

.1.3.6.1.4.1.164.12.2.1.2.2.7.1.2

atmVcPMQoSCLR

Cell Loss Ratio counter for the reference period (atmVcPMQoSPeriodRef)-
defined in accordance with I.356 , in %.
The value will be multipuled by 100.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.7.1.3

atmVcPMQoSCER

Cell Error Ratio counter for the reference period (atmVcPMQoSPeriodRef)
defined in accordance with I.356 , in %.
The value will be multipuled by 100.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.7.1.4

atmVcPMQoSCMR

Cell Miss-insertion Ratio counter for the reference period (atmVcPMQoSPeriodRef)
defined in accordance with I.356 , cells/sec .

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.7.1.5

atmVcShaperStatTable

table

.1.3.6.1.4.1.164.12.2.1.2.2.8 · 1 row entry · 6 columns

Open in standard view

The ATM VC shaper statistics table.

atmVcShaperStatEntry entry .1.3.6.1.4.1.164.12.2.1.2.2.8.1

An entry in the ATM VC shaper statistics table.

Indexes

IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci

Column Syntax OID

atmVcShaperDiscarded

The number of Cells that were discarded in the shaper on that VCC due
to buffer overflow. This counter counts till it reaches its MAX value
(20 bits) and then rolls over.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.8.1.1

atmVcShaperOccupation

The number of Cells that are currently stored in the buffer.
This parameter is limited to 20 bits.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.2.8.1.2

atmVcShaperMaxOccupation

The Maximum number of Cells that were stored in the buffer,
since this VC was activated. This parameter is limited to 20 bits.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.2.8.1.3

atmVcShaperLevel

Enumeration

Enumerated Values:

1	empty
2	full
3	below
4	above

.1.3.6.1.4.1.164.12.2.1.2.2.8.1.4

atmVcShaperEpdDropped

The number of Cells that were dropped in the shaper on that VCC
due to EPD\PPD mechanism in the last second.
This parameter is limited to 24 bits.
Applicable for a EPD/PPD VC only.

SNMPv2-SMICounter32

Constraints:
range: 1-4094

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.8.1.5

atmVcShaperTotalEpdDropped

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.8.1.6

atmIntervalDateTable

table

.1.3.6.1.4.1.164.12.2.1.3 · 1 row entry · 3 columns

Open in standard view

The agent will keep in this group the date & time
corresponding to each interval.

atmIntervalDateEntry entry .1.3.6.1.4.1.164.12.2.1.3.1

The date & time for the given interval.

Indexes

atmIntervalDateInterval

Column	Syntax	OID
atmIntervalDateInterval The interval number defining this entry.	Integer32 Constraints: `range: 1-96` `range: 1-10`	`.1.3.6.1.4.1.164.12.2.1.3.1.1`
atmIntervalDateDate The date corresponding to this interval.	SNMPv2-TCDisplayString Constraints: `range: 1-65535` Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.12.2.1.3.1.2`
atmIntervalDateTime The time corresponding to this interval.	SNMPv2-TCDisplayString Constraints: `range: 1-65535` Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.12.2.1.3.1.3`

atmGenSysSelfTestTable

table

.1.3.6.1.4.1.164.12.2.2.1.1 · 1 row entry · 2 columns

Open in standard view

A table containing the results of the initial testing of the device.

atmGenSysSelfTestEntry entry .1.3.6.1.4.1.164.12.2.2.1.1.1

An entry in table.

Indexes

atmGenSysSelfTestIndex WING-MIBwingCfgDevMac WING-MIBwingCfgDevIfName WING-MIBwingCfgDevIfMeshpointBssmapMeshpoint

Column	Syntax	OID
atmGenSysSelfTestIndex A running index for the table.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.2.1.1.1.1`
atmGenSysSelfTestResult The results of the initial testing of the device.	SNMPv2-TCDisplayString Constraints: `range: 1-8` Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.12.2.2.1.1.1.2`

atmGenSysLogTable

table

.1.3.6.1.4.1.164.12.2.2.1.3 · 1 row entry · 2 columns

Open in standard view

A copy of the log buffer.

atmGenSysLogEntry entry .1.3.6.1.4.1.164.12.2.2.1.3.1

An entry in table.

Indexes

atmGenSysLogIndex WING-MIBwingCfgDevMac WING-MIBwingCfgDevBridgeVlanId

Column	Syntax	OID
atmGenSysLogIndex The index of the log buffer.	Integer32 Constraints: `range: 1-2048` `range: 1-4095`	`.1.3.6.1.4.1.164.12.2.2.1.3.1.1`
atmGenSysLogMessage The log buffer entry message text.	OctetString Constraints: `range: 80-80` `range: 64-64`	`.1.3.6.1.4.1.164.12.2.2.1.3.1.2`

atmGenSysCxRefTable

table

.1.3.6.1.4.1.164.12.2.2.1.5 · 1 row entry · 2 columns

Open in standard view

A Cross Reference table. The table maintains 
an index of an object which is also the table index, 
and a counter that indicates how many times this 
object was referenced.
When using this table for more than one referenced table,
			which uses the same range of indexes, then the index 
			should be shifted by a unique offset per table.
             
In ACE2002 this table is used for TD and for FR Desc. Thus,
the index for FR Descriptor is: FR Descriptor index + offset. 
The offset is described in the ACE2002 NMS SRS.

atmGenSysCxRefEntry entry .1.3.6.1.4.1.164.12.2.2.1.5.1

The entries will be added by the agent upon
an entry addition in the referenced tables
(TD table, FR Descriptor etc.)

Indexes

atmGenSysCxRefIndex

Column	Syntax	OID
atmGenSysCxRefIndex The index specifies an entry in the table of the object.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.2.1.5.1.1`
atmGenSysCxRefCounter The counter counts the number of references that have been made to the object .	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.2.1.5.1.2`

atmNteManagerTable

table

.1.3.6.1.4.1.164.12.3.1.1.1 · 1 row entry · 13 columns

Open in standard view

The Manager Table includes all the NMSs that
receive traps from this agent. A single manager
can receive traps on more than one PVC. The agent 
will set	implicitly the correct ifIndex, VPI, VCI 
values to all relevant entries in the table when 
the user changes	them for one of the PVCs.

atmNteManagerEntry entry .1.3.6.1.4.1.164.12.3.1.1.1.1

A single manager and the PVC for receiving traps.

Indexes

atmNteManagerIP atmNteManagerPvc

Column Syntax OID

atmNteManagerIP

The IP address of the NMS.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.12.3.1.1.1.1.1

atmNteManagerPvc

A PVC index. The range is 1..8. There are four PVCs
on the User Port and four PVCs on the Network Port.
The default VPI, VCI values are specified below.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.1.1.2

atmNteManagerIfIndex

The ATM interface index of the management port.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.1.1.3

atmNteManagerVpi

The VPI of the management VCL. Default: 0.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.1.1.4

atmNteManagerVci

The VCI of the management VCL. Defaults: 32,33,34,35.

SNMPv2-SMIInteger32r/w

Constraints:
range: 1-25

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.1.1.5

atmNteManagerTrapMask

The value of this attribute determines the type of traps the
agent should mask and not send to this NMS. The
value is differently determined for different products. There are
mainly two methods:
- an integer number, …

SNMPv2-SMIInteger32r/w

Constraints:
range: 1-3

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.1.1.6

atmNteManagerRowStatus

Creation/Deletion of rows in the table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.12.3.1.1.1.1.7

atmNteManagerNextHop

This parameter is relevant to Ethernet out of band
host only (PVC=10).
The Next Hop IP address of the entry route.

SNMPv2-SMIIpAddressr/w

Constraints:
range: 60-300

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.12.3.1.1.1.1.8

atmNteManagerVlanSupport

VLAN support (Tagging).
no - No support to VLAN.
yes - 4 VLAN bytes will be added to the frame.

Enumerationr/w

Enumerated Values:

2	no
3	yes

.1.3.6.1.4.1.164.12.3.1.1.1.1.9

atmNteManagerVlanIdentifier

VLAN ID. Range is 0..4095.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.1.1.10

atmNteManagerVlanFramePriority

VLAN Frame priority.Range is 0..7.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.1.1.11

atmNteManagerAlarmTrapMask

The value of this object determines the alarm traps that the
agent should mask and not send to this NMS.

The value is an Octet String, where each bit is assigned to a certain
trap.
If the bit = 1, the t…

OctetStringr/w

.1.3.6.1.4.1.164.12.3.1.1.1.1.12

atmNteManagerConfigPorts

This variable defines from which port/s this manager can configure the device.
For IPmux 11 the value of this variable will be according to the ports
combination:
Network =1
User1=2
User2=4
(For Example: All ports = 7).

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.1.1.13

atmNteConfOamIfTable

table

.1.3.6.1.4.1.164.12.3.1.1.9.4 · 1 row entry · 1 columns

Open in standard view

OAM support per ATM interface.

atmNteConfOamIfEntry entry .1.3.6.1.4.1.164.12.3.1.1.9.4.1

Indexes

IF-MIBifIndex

Column Syntax OID

atmNteConfOamIfAisRdi

This parameter controls the generation of F4/F5
AIS and RDI due to lower order problems such as physical
layer problems.

For AIS: Defines if F4/F5 AIS cell is transmitted due
to problems such as physic…

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.164.12.3.1.1.9.4.1.1

atmNteHostIfTable

table

.1.3.6.1.4.1.164.12.3.1.1.11 · 1 row entry · 13 columns

Open in standard view

Host IP interface table.

atmNteHostIfEntry entry .1.3.6.1.4.1.164.12.3.1.1.11.1

Indexes

atmNteHostPvcIndex

Column Syntax OID

atmNteHostPvcIndex

A PVC index. The range is 1..10.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.11.1.1

atmNteHostIP

The host interface IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.12.3.1.1.11.1.2

atmNteHostMask

The host interface subnet mask.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.12.3.1.1.11.1.3

atmNteHostAtmIfIndex

ATM interface index. Will be 1
for user port, and 2 for network port.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.11.1.4

atmNteHostVpi

VPI of the PVC connected to that host interface.

SNMPv2-SMIInteger32r/w

Constraints:
range: 0-253

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.11.1.5

atmNteHostVci

VCI of the PVC connected to that host interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.11.1.6

atmNteHostRowStatus

Creation/Deletion of rows in the table.

SNMPv2-TCRowStatusr/w

Constraints:
range: 0-253

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.12.3.1.1.11.1.7

atmNteHostRdnVpi

The VPI of the redundant management VCL.
This parameter is applicable only if atmNteRdnManagement=enable(3).

SNMPv2-SMIInteger32r/w

Constraints:
range: 0-253

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.11.1.8

atmNteHostRdnVci

The VCI of the redundant management VCL.
This parameter is applicable only if atmNteRdnManagement=enable(3).

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.11.1.9

atmNteHostDefaultNextHop

The host interface Default Next Hop address.
This address will be used as default next hop for
every Bundle mapped to this Host.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.12.3.1.1.11.1.10

atmNteHostVlanTagging

VLAN Tag support.
no - No support to VLAN.
yes - 4 VLAN bytes will be added
to each frame connected to this Host.

Enumerationr/w

Enumerated Values:

2	no
3	yes

.1.3.6.1.4.1.164.12.3.1.1.11.1.11

atmNteHostDefaultVlanID

Default VLAN ID of this Host.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.11.1.12

atmNteHostDefaultVlanPriority

Default VLAN priority for this Host.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.11.1.13

atmNteOamTable

table

.1.3.6.1.4.1.164.12.3.1.1.26 · 1 row entry · 4 columns

Open in standard view

This table is a static table, which is created by agent once
upon initialization. The created entries are actually, only the
supported OAM features. 
This table enables addition of new features by adding new entries
rather than adding scalar parameters.
An OAM feature is defined by the indexes values combination.

atmNteOamEntry entry .1.3.6.1.4.1.164.12.3.1.1.26.1

An entry in the OAM table.
Each entry in this table will indicate a special OAM.

Indexes

atmNteOamMode atmNteOamCellType atmNteOamLevel

Column Syntax OID

atmNteOamMode

The OAM cell path.
endToEnd(1) - the entire path.

Enumeration

Enumerated Values:

endToEnd

.1.3.6.1.4.1.164.12.3.1.1.26.1.1

atmNteOamCellType

This object indicates a unique Indication Signal.
aisAndRdi(1) - Alarm Indication Signal (AIS) and
Remote Defect Indication (RDI) cell.
loopback(2) - Loopback cell.

Enumeration

Enumerated Values:

1	aisAndRdi
2	loopback

.1.3.6.1.4.1.164.12.3.1.1.26.1.2

atmNteOamLevel

The level of the OAM cell.
-- f4 (2) - VP level,
f5 (3) - VC level.

Enumeration

Enumerated Values:

.1.3.6.1.4.1.164.12.3.1.1.26.1.3

atmNteOamEnable

This parameter determines if the specified OAM cells
will be enabled.

Enumerationr/w

Enumerated Values:

2	disable
3	enable

.1.3.6.1.4.1.164.12.3.1.1.26.1.4

atmAlarmForwardingTable

table

.1.3.6.1.4.1.164.12.3.1.1.32 · 1 row entry · 7 columns

Open in standard view

The Alarm Forwarding Mechanism will be operated 
for this table entries.

atmAlarmForwardingEntry entry .1.3.6.1.4.1.164.12.3.1.1.32.1

Each entry in this table is a pair of ports that
the Alarm Forwarding Mechanism is determined for.

Indexes

atmAlarmForwardingFailPort atmAlarmForwardingToPort

Column Syntax OID

atmAlarmForwardingFailPort

An Index of the port on which a fail occurs.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.32.1.1

atmAlarmForwardingToPort

An Index of the port that will be affected
upon the failure of the atmAlarmForwardingFailPort.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.32.1.2

atmAlarmForwardingRowStatus

Creation/Deletion of rows in the table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.12.3.1.1.32.1.3

atmAlarmForwardingFailureLevel

This parameter determines the level of failure
that will operate the Alarm Forwarding Mechanism.

Bitsr/w

Enumerated Values:

0	physical
1	atm

.1.3.6.1.4.1.164.12.3.1.1.32.1.4

atmAlarmForwardingRecoveryMode

This parameter determines the Recovery Mode.
manual - The user should stop the RDI transmission
by using the atmAlarmForwardingRecoveryCommand.
automatic - The RDI transmission will be automatically
…

Enumerationr/w

Enumerated Values:

1	manual
2	automatic

.1.3.6.1.4.1.164.12.3.1.1.32.1.5

atmAlarmForwardingRecoveryCommand

This parameter is a command. It is applicable when
atmAlarmForwardingRecoveryMode = manual.

on - Will stop the RDI transmission. After setting to 'On'
the agent will set this parameter back to 'Off'.

Enumerationr/w

Enumerated Values:

2	off
3	on

Constraints:
range: 120-2147483646

.1.3.6.1.4.1.164.12.3.1.1.32.1.6

atmAlarmForwardingTimeFilterWindow

This parameter determines the Time Filter Window, meaning:
how much time (in seconds) should the alarm exist
in order to start the Alarm Forwarding operation.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 500-2147483646

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.3.1.1.32.1.7

atmVpCrossConnectExtenTable

table

.1.3.6.1.4.1.164.12.3.1.1.34 · 1 row entry · 1 columns

Open in standard view

An extension to the ATM VP Cross Connect table
(RFC2515 - atmVpCrossConnectTable).

atmVpCrossConnectExtenEntry entry .1.3.6.1.4.1.164.12.3.1.1.34.1

An entry in the table.

Indexes

No indexes recorded

Column	Syntax	OID
atmVpCrossConnectName The Connection's name.	OctetStringr/w Constraints: `range: 1-64` `range: 10-3600`	`.1.3.6.1.4.1.164.12.3.1.1.34.1.1`

atmVcCrossConnectExtenTable

table

.1.3.6.1.4.1.164.12.3.1.1.35 · 1 row entry · 1 columns

Open in standard view

An extension to the ATM VC Cross Connect table
(RFC2515 - atmVcCrossConnectTable).

atmVcCrossConnectExtenEntry entry .1.3.6.1.4.1.164.12.3.1.1.35.1

An entry in the table.

Indexes

No indexes recorded

Column	Syntax	OID
atmVcCrossConnectName The Connection's name.	OctetStringr/w Constraints: `range: 1-64` `range: 10-3600`	`.1.3.6.1.4.1.164.12.3.1.1.35.1.1`

atmCongestionThresholdTable

table

.1.3.6.1.4.1.164.12.3.1.1.36 · 1 row entry · 3 columns

Open in standard view

The Congestion Thresholds Configuration Table.

atmCongestionThresholdEntry entry .1.3.6.1.4.1.164.12.3.1.1.36.1

An entry in the table.

Indexes

atmCongestionThresholdType atmCongestionThresholdServiceCategory

Column Syntax OID

atmCongestionThresholdType

The Congestion Threshold Type.

Enumeration

Enumerated Values:

1	global
2	clp01
3	clp1Upper
4	clp1Lower

.1.3.6.1.4.1.164.12.3.1.1.36.1.1

atmCongestionThresholdServiceCategory

The Congestion Threshold Service Category.

Enumeration

Enumerated Values:

1	cbr
2	rtVbr
3	ubrPlus
4	ubr

.1.3.6.1.4.1.164.12.3.1.1.36.1.2

atmCongestionThresholdValue

The Congestion Threshold Value.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.36.1.3

atmNteIdTable

table

.1.3.6.1.4.1.164.12.3.1.2.1 · 1 row entry · 7 columns

Open in standard view

The IDs of the cards and of the system.

atmNteIdEntry entry .1.3.6.1.4.1.164.12.3.1.2.1.1

Indexes

atmNteIdIndex

Column Syntax OID

atmNteIdIndex

An Index of the Unit ID table.
The following units have IDs in this table:
1 - System
2 - ATM Board
3 - User Card
4 - Trunk 1 card
5 - Trunk 2 card
6 - Shaper
7 - Clock Unit
8 - Slot 1 card
9 - Slot 2 card
10 - S…

SNMPv2-SMIInteger32

Constraints:
range: 600-2147483646

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.2.1.1.1

atmNteUnitId

The ID of the Unit.
For index = 6, the id will describe the validity
of a shaper in the system: 0 - Shaper Not exist
1 - Shaper exist.
For index = 7, the id will describe the validity
of a…

SNMPv2-SMIInteger32

Constraints:
range: 10-3600

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.2.1.1.2

atmNteUnitVersion

Hardware and Software version
of the module.

SNMPv2-TCDisplayString

Constraints:
range: 1-100

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.12.3.1.2.1.1.3

atmNteCardType

The card type.

Enumeration

Enumerated Values:

1	notApplicable
2	sc13mR155
3	st13sR155
4	st13lR155
5	utpR155
6	cxBncR155
7	e3
8	t3
9	e1
10	e1Ltu
11	fc13lR155
12	fc13lhR155
13	fc15lhR155
14	fc13lE3
15	fc13lhE3
16	fc15lhE3
17	fc13lT3
18	fc13lhT3
19	fc15lhT3
20	t1
21	eth
22	ethE1CesBnc
23	ethE1CesRj45
24	ethT1CesRj45
25	e1CesRj45
26	e1CesBnc
27	t1CesRj45
28	e14Ces
29	e14CesRj45
30	t14CesRj45
31	hdlc4port
32	hdlcE14CesBnc
33	hdlcE14CesRj45
34	hdlcT14CesRj45
35	e1Rj45
36	e1Bnc
37	ethE14CesBnc
38	ethE14CesRj45
39	ethT14CesRj45
40	hdlc1portHssi
41	hdlcHssiE14CesBnc
42	hdlcHssiE14CesRj45
43	hdlcHssiT14CesRj45
44	e14ImaRj45
45	e14ImaBnc
46	t14ImaRj45
47	ethE3CesBnc
48	ethT3CesBnc
49	smSf1R155
50	smSf2R155
51	sc13sR155
52	sc13lR155
53	utp25
54	sc13lhR155
55	sc15lhR155
56	sc13ljR155
57	sc13lhjR155
58	sc15lhjR155
59	e18Ces
60	e18CesRj45
61	t18CesRj45
62	sc13mR622
73	sc13lR622
74	sc13lhR622
75	sc15lhR622
76	fr4Port
77	t3j
78	fr1Port
79	hdlc1Port
80	sc13mR155D
81	sc13lR155D
82	fc13lR155D
83	st13lR155D
84	sc13lhR155D
85	fc13lhR155D
86	st13lhR155D
87	e18ImaBnc
88	e18ImaRj45
89	t18ImaRj45
90	lanUtpE
91	lanLc13lE
92	lanLc13mE
93	e14ImaRj45CfgMode
94	e14ImaBncCfgMode
95	t14ImaRj45CfgMode
96	sc13mR155R
97	sc13lR155R
98	fc13lR155R
99	st13lR155R
100	sc13lhR155R
101	fc13lhR155R
102	st13lhR155R
103	fEthUtpD
104	fEthSmD
105	fEthMmD
106	e14CesRj45Unbal
107	sc13mR155n
108	sc13lR155n
109	sc13lhR155n
110	sc15lhR155n
111	fc13lR155n
112	fc13lhR155n
113	fc15lhR155n
114	st13lR155n
115	lanUtp
116	lanLc13l
117	lanLc13m
118	e1FrHdlc
119	e1FrHdlcUnbal
120	t1FrHdlc
121	channelizedT3
122	fc15lhR155D
123	sc15lhR155D
124	smSf1R155D
125	smSf2R155D
126	smSf3R155D
127	fc15lhR155R
128	sc15lhR155R
129	smSf1R155R
130	smSf2R155R
131	smSf3R155R
132	st13lhR155n
133	smSf1R155n
134	smSf2R155n
135	smSf3R155n
136	t18CesNg
137	e18CesUnbalNg
138	e18CesBalNg
139	t14CesNg
140	e14CesUnbalNg
141	e14CesBalNg
142	t18ImaUniNg
143	e18ImaUniUnbalNg
144	e18ImaUniBalNg
145	t14ImaUniNg
146	e14ImaUniUnbalNg
147	e14ImaUniBalNg
148	t1Ces
149	e1CesUnbal
150	e1CesBal
151	switchedLan
152	channelizedSts1
153	st13mR155
154	st13lhR155
155	st15lhR155
156	gigabitEthUtp
157	gigabitEthSfp
158	fastEthUtp
251	main
252	control
253	fan
254	unknown
255	empty

.1.3.6.1.4.1.164.12.3.1.2.1.1.4

atmNteCardStatus

Status of the card in the selected slot.

notActive - Connections are in NotReady state. No configuration is
available for the card. The access to the card HW is blocked.
…

Enumeration

Enumerated Values:

1	notApplicable
2	notActive
3	active
4	inProgress
5	empty

.1.3.6.1.4.1.164.12.3.1.2.1.1.5

atmNteCardCmd

Command on the card that is installed in the selected slot.
The commands are applicable according to the value of atmNteCardStatus.
See the specification document for details.

deleteConfig - Deletes the c…

Enumerationr/w

Enumerated Values:

1	notApplicable
2	deleteConfig
3	deactivate
4	activate

.1.3.6.1.4.1.164.12.3.1.2.1.1.6

atmNteProgCardType

The programmed card type.

Enumerationr/w

Enumerated Values:

251	main
252	control
253	fan
255	empty
1001	atm155
1002	eth

.1.3.6.1.4.1.164.12.3.1.2.1.1.7

atmSysIntervalTable

table

.1.3.6.1.4.1.164.12.3.1.2.8.2 · 1 row entry · 2 columns

Open in standard view

The system level Interval table.

atmSysIntervalEntry entry .1.3.6.1.4.1.164.12.3.1.2.8.2.1

Indexes

atmSysIntervalNumber

Column	Syntax	OID
atmSysIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.164.12.3.1.2.8.2.1.1`
atmSysIntervalCdc Seconds in which cells dropped was occured in 15 minutes interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.3.1.2.8.2.1.2`

atmNteConfIfTable

table

.1.3.6.1.4.1.164.12.3.2.1.1 · 1 row entry · 12 columns

Open in standard view

The Physical interface configuration table.

atmNteConfIfEntry entry .1.3.6.1.4.1.164.12.3.2.1.1.1

An entry in the Physical interface configuration table.
The ifIndex is of the lowest physical layer.

Indexes

IF-MIBifIndex

Column Syntax OID

atmConfIfTransmitClk

The transmit clock of the port.

Enumerationr/w

Enumerated Values:

2	internal
3	external
4	loopback
5	adaptive

Constraints:
range: 10-3600

.1.3.6.1.4.1.164.12.3.2.1.1.1.1

atmConfIfLoopback

Interface Loopback.

Enumerationr/w

Enumerated Values:

2	internal
3	external
4	disable

.1.3.6.1.4.1.164.12.3.2.1.1.1.2

atmConfIfFrameType

The frame type. Valid values for a 155M interface:
sonet(2), sdh(3). Valid values for a T3 interface:
direct(4), plcpInternal(5), plcpExternal(6),
directNoScrmbling(10), plcpInternalNoScrmbling(11),
plcpExternalNoScrmb…

Enumerationr/w

Enumerated Values:

1	other
2	sonet
3	sdh
4	direct
5	plcpInternal
6	plcpExternal
7	e3
8	ethCrcTrans
9	ethCrcNotTrans
10	directNoScrmbling
11	plcpInternalNoScrmbling
12	plcpExternalNoScrmbling

.1.3.6.1.4.1.164.12.3.2.1.1.1.3

atmConfIfCardType deprecated

The card type.

Enumeration

Enumerated Values:

1	notApplicable
2	sc13m-155
3	st13s-155
4	st13l-155
5	utp-155
6	cx-bnc-155
7	e3
8	t3
9	e1
10	e1-ltu
11	fc13l-155
12	fc13lh-155
13	fc15lh-155
14	fc13l-e3
15	fc13lh-e3
16	fc15lh-e3
17	fc13l-t3
18	fc13lh-t3
19	fc15lh-t3

.1.3.6.1.4.1.164.12.3.2.1.1.1.4

atmConfAtmIfVpiVciLimit

The limit on the sum of the VPI+VCI bits for this interface.

Enumeration

Enumerated Values:

2	bits15
3	bits17

.1.3.6.1.4.1.164.12.3.2.1.1.1.5

atmConfIfHwFeatures

HW features command.

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.164.12.3.2.1.1.1.6

atmConfIfOutputRate

This parameter indicates the output rate in cells/sec, which is
supported per port. Successfully setting this parameter
is dependent on all other ports values calculations,
which are described in the NMS SRS.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.1.1.7

atmConfIfInputRate

This parameter indicates the input rate in cells/sec, which is
supported per port. Successfully setting this parameter
is dependent on all other ports values calculations,
which are described in the NMS SRS.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.1.1.8

atmConfAlarmForwarding

Enables Path AIS Alarm forwarding upon a failure detection. The
following might be considered as a failure: LOS, LOF, LOC, SLM,
LOP, Path AIS and Line AIS.

disable(2) - will not forward an alarm upon a…

Enumerationr/w

Enumerated Values:

2	disable
3	enable

.1.3.6.1.4.1.164.12.3.2.1.1.1.9

atmConfIfAllocatedBw

Total VC Bandwidth Allocation.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.1.1.10

atmConfIfLowerVpi

The Lower possible VPI.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.1.1.11

atmConfIfOamMode

OAM support Mode, which determines the
interface's location in a segment wise.

Enumerationr/w

Enumerated Values:

2	segmentTermination
3	endToEndTermination

Constraints:
range: 1-64

.1.3.6.1.4.1.164.12.3.2.1.1.1.12

atmNteAlarmIfTable

table

.1.3.6.1.4.1.164.12.3.2.1.2 · 1 row entry · 11 columns

Open in standard view

The interface Alarm table.

atmNteAlarmIfEntry entry .1.3.6.1.4.1.164.12.3.2.1.2.1

An entry in the interface Alarm table.

Indexes

IF-MIBifIndex

Column Syntax OID

atmInterfaceActiveAlarms

A Bit String of the active alarms on this interface.
An up bit (1) means there is an active alarm of this
type. A down bit (0) means there is no such alarm.
The meaning of the bits is as follows:
1 - LOS
2 - LOF
3 - Lin…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.1

atmThresholdSectionBIP

When Section BIPs are greater than this threshold,
an active alarm is raised. N/A for ds3/e3 interface.

SNMPv2-SMIInteger32r/w

Constraints:
range: 1-128

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.2

atmThresholdLineBIP

When Line BIPs are greater than this threshold,
an active alarm is raised. N/A for ds3/e3 interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.3

atmThresholdLineFEBE

When Line FEBEs are greater than this threshold,
an active alarm is raised. N/A for ds3/e3 interface.

SNMPv2-SMIInteger32r/w

Constraints:
range: 1-128

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.4

atmThresholdPathBIP

When Path BIPs are greater than this threshold,
an active alarm is raised.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.5

atmThresholdPathFEBE

When Path FEBEs are greater than this threshold,
an active alarm is raised.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.6

atmThresholdErroredCells

When Errored Cells are greater than this threshold,
an active alarm is raised.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.7

atmThresholdLostCells

When Lost Cells are greater than this threshold,
an active alarm is raised.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.8

atmThresholdMisinsertedCells

When Misinserted Cells are greater than this threshold,
an active alarm is raised.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.9

atmInterfaceAlarmStatus

The variable is on(3) when there is any active alarm
on this interface.

Enumeration

Enumerated Values:

2	off
3	on

Constraints:
range: 1-64

.1.3.6.1.4.1.164.12.3.2.1.2.1.10

atmInterfaceMaskAlarms

A Bit String of alarms mask on this interface.
An up bit (1) means that the respective alarm is masked.
A down bit (0) means no mask.
The mask is supported for the following alarms:
1 - LOS

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.11

atmNteConfVpTable

table

.1.3.6.1.4.1.164.12.3.2.1.3 · 1 row entry · 13 columns

Open in standard view

The ATM VP configuration table.
The table is an extension to the atmVplTable of
RFC-1695.

atmNteConfVpEntry entry .1.3.6.1.4.1.164.12.3.2.1.3.1

An entry in the ATM VP configuration table.
ifIndex of the ATM layer.

Indexes

IF-MIBifIndex ATM-MIBatmVplVpi

Column Syntax OID

atmConfVpPolicing

Policing method desired for this VPL.

Enumerationr/w

Enumerated Values:

1	none
2	police
3	monitor
4	shaping
5	policingAndShaping

Constraints:
range: 8-21

.1.3.6.1.4.1.164.12.3.2.1.3.1.1

atmConfVpCCAdminStatus

up(2) - Activate Continuity Check (CC).
down(3) - Deactivate CC.
source(4) - Activate OAM CC(Continuity Check) of local agent
( start sending Oam cells to the remote side ).
sink(5) - Activat…

Enumerationr/w

Enumerated Values:

2	up
3	down
4	source
5	sink
6	listenToActivationCells
7	originateActivationCells

.1.3.6.1.4.1.164.12.3.2.1.3.1.2

atmConfVpLoopbackAdminStatus

up(2) - Start loopback OAM cells.
down(3) - Stop sending loopback OAM cells.

For ace2002:
up(2) - Transmitting LB cells with llid all ones
(i.e. FFFF..FF)
down(3) - Not transmitting LB cells.…

Enumerationr/w

Enumerated Values:

2	up
3	down
4	llid
5	segment
6	endToEnd
7	segmentLlid
8	endToEndLlid

Constraints:
range: 1-128

.1.3.6.1.4.1.164.12.3.2.1.3.1.3

atmConfVpLoopbackSinkAddress

Destination address.
For ace101: 2 bytes are used.
For ace2002: 16 bytes are used.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.164.12.3.2.1.3.1.4

atmConfVpCongestionControl

Each bit indicates a selection of one option
as the following description. All combinations
are possible and legal.
The codes are:
1 - EPD
2 - CLP
4 - EFCI

OctetStringr/w

Constraints:
range: 1-128

.1.3.6.1.4.1.164.12.3.2.1.3.1.5

atmConfVpCCDirection

both(2) - Agent send OAM CC cells and check received OAM CC cells
source(4)- Agent send OAM CC cells.
sink(5) - Agent checks received OAM CC cells.

Enumerationr/w

Enumerated Values:

2	both
4	source
5	sink

.1.3.6.1.4.1.164.12.3.2.1.3.1.6

atmConfVpCreationTime

A date-time in which the VP was created.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.164.12.3.2.1.3.1.7

atmConfVpOamSupport

OAM support mode, which determines the device location
in a segment wise.

Enumerationr/w

Enumerated Values:

1	intermediate
2	segmentTermination
3	endToEndTermination

.1.3.6.1.4.1.164.12.3.2.1.3.1.8

atmConfVpCCOperStatus

initial(1) - The CC activation process is not started.
source(4) - Agent sends OAM CC cells.
sink(5) - Agent checks received OAM CC cells.
both (8) - OAM CC of local and remote agents activation.
timeout (9) - Timeo…

Enumeration

Enumerated Values:

1	initial
4	source
5	sink
8	both
9	timeout
10	denied
11	conflict
12	manual

.1.3.6.1.4.1.164.12.3.2.1.3.1.9

atmConfVpLoopbackTraffic

This parameter has both command and status meanings:
off(2) - Set to 'Off' will Stop traffic loop. Getting this
value means that the loop is not running.
on (3) - Set to 'On' will start traffic loop. Getting
…

Enumerationr/w

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.164.12.3.2.1.3.1.10

atmConfVpLoopbackFailureInd

This object allows user to define the Indication that will be created upon
a LB cell failure.
disabled(2) - no indication will be created.
segmentAis(3) - will cause Tx of a segment AIS.
segmentRdi(4) - will cause Tx o…

Enumerationr/w

Enumerated Values:

2	disabled
3	segmentAis
4	segmentRdi
5	segmentAisAndRdi
6	endToEndAis
7	endToEndRdi
8	endToEndAisAndRdi

.1.3.6.1.4.1.164.12.3.2.1.3.1.11

atmConfVpLoopbackFailureThreshold

The number of the LB failures before starting transmission of the
Indication defined by atmConfVcLoopbackFailureInd.
Range: 1..16. Default: 1.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.3.1.12

atmConfVpOamDirection

The direction of OAM cell insertion.
downStream(2) - The OAM cell will be inserted in downStream.
upStream(3) - The OAM cell will be inserted in upStream.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	downStream
3	upStream

.1.3.6.1.4.1.164.12.3.2.1.3.1.13

atmNteConfVcTable

table

.1.3.6.1.4.1.164.12.3.2.1.4 · 1 row entry · 16 columns

Open in standard view

The ATM VC configuration table.
The table is an extension to the atmVclTable of
RFC-1695.

atmNteConfVcEntry entry .1.3.6.1.4.1.164.12.3.2.1.4.1

An entry in the ATM VC configuration table.
ifIndex of the ATM layer.

Indexes

IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci

Column Syntax OID

atmConfVcPolicing

Policing method desired for this VCL.

Enumerationr/w

Enumerated Values:

1	none
2	police
3	monitor
4	shaping
5	policingAndShaping
255	notApplicable

.1.3.6.1.4.1.164.12.3.2.1.4.1.1

atmConfVcCCAdminStatus

up(2) - Activate Continuity Check (CC).
down(3) - Deactivate CC.
source(4) - Activate OAM CC(Continuity Check) of local agent
( start sending Oam cells to the remote side ).
sink(5) - Activate CC of r…

Enumerationr/w

Enumerated Values:

2	up
3	down
4	source
5	sink
6	listenToActivationCells
7	originateActivationCells

.1.3.6.1.4.1.164.12.3.2.1.4.1.2

atmConfVcLoopbackAdminStatus

up(2) - Start loopback OAM cells.
down(3) - Stop sending loopback OAM cells.

For ace2002:
up(2) - Transmitting LB cells with llid all ones
(i.e. FFFF..FF)
down(3) - Not transmitting LB cells.…

Enumerationr/w

Enumerated Values:

2	up
3	down
4	llid
5	segment
6	endToEnd
7	segmentLlid
8	endToEndLlid

Constraints:
range: 1-1000

.1.3.6.1.4.1.164.12.3.2.1.4.1.3

atmConfVcLoopbackSinkAddress

Destination address.
For ace101: 2 bytes are used.
For ace2002: 16 bytes are used.

OctetStringr/w

Constraints:
range: 2-20

.1.3.6.1.4.1.164.12.3.2.1.4.1.4

atmConfVcCongestionControl

Each bit indicates a selection of one option
as the following description. All combinations
are possible and legal.
The codes are:
1 - EPD
2 - CLP
4 - EFCI.
For ace2002:
1 - Packet Discard.

OctetStringr/w

.1.3.6.1.4.1.164.12.3.2.1.4.1.5

atmConfVcCCDirection

both(2) - Agent send OAM CC cells and check receivev OAM CC cells
none(3) - Agent does not send and does not check received OAM CC cells.
source(4)- Agent send OAM CC cells.
sink(5) - Agent checks received OAM …

Enumerationr/w

Enumerated Values:

2	both
3	none
4	source
5	sink

.1.3.6.1.4.1.164.12.3.2.1.4.1.6

atmConfVcCreationTime

A date-time in which the VC was created.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.164.12.3.2.1.4.1.7

atmConfVcOamSupport

OAM support mode, which determines the device location
in a segment wise.

segmentAndEndToEnd - In this mode the OAM cells are generated
before the ABM (ATM Buffer Manager), so
…

Enumerationr/w

Enumerated Values:

1	intermediate
2	segmentTermination
3	endToEndTermination
4	segmentAndEndToEnd

.1.3.6.1.4.1.164.12.3.2.1.4.1.8

atmConfVcCCActivationCtrl

manual(1) - CC Activation process is disable
activator(2) - ACE-101 initiate CC Activation process
listener(3) - ACE-101 wait to CC Activation request from remote side.

Enumerationr/w

Enumerated Values:

1	manual
2	activator
3	listener

Constraints:
range: 120-2147483646

.1.3.6.1.4.1.164.12.3.2.1.4.1.9

atmConfVcCCOperStatus

initial (1) - The CC activation process is not started.
up (2) - Continuity Check (CC) activated.
down (3) - CC deactivated.
source (4) - OAM CC(Continuity Check) of local agent activated.
sink (5) - OAM CC of remo…

Enumeration

Enumerated Values:

1	initial
2	up
3	down
4	source
5	sink
8	both
9	timeout
10	denied
11	conflict
12	manual

Constraints:
range: 500-2147483646

.1.3.6.1.4.1.164.12.3.2.1.4.1.10

atmConfVcLoopbackTraffic

Enumerationr/w

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.164.12.3.2.1.4.1.11

atmConfVcLoopbackFailureInd

Enumerationr/w

Enumerated Values:

2	disabled
3	segmentAis
4	segmentRdi
5	segmentAisAndRdi
6	endToEndAis
7	endToEndRdi
8	endToEndAisAndRdi

.1.3.6.1.4.1.164.12.3.2.1.4.1.12

atmConfVcLoopbackFailureThreshold

The number of the LB failures before starting transmission of the
Indication defined by atmConfVcLoopbackFailureInd.
Range: 1..16. Default: 1.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.4.1.13

atmConfVcOamDirection

The direction of OAM cell insertion.
downStream(2) - The OAM cell will be inserted in downStream.
upStream(3) - The OAM cell will be inserted in upStream.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	downStream
3	upStream

.1.3.6.1.4.1.164.12.3.2.1.4.1.14

atmConfVcName

VC Name.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.12.3.2.1.4.1.15

atmConfVcConnected

This object indicates whether this VC is connected.

Enumeration

Enumerated Values:

1	notConnected
2	mng
3	bridgePort

.1.3.6.1.4.1.164.12.3.2.1.4.1.16

atmNteAlarmVpTable

table

.1.3.6.1.4.1.164.12.3.2.1.5 · 1 row entry · 2 columns

Open in standard view

The ATM VP Alarm table.

atmNteAlarmVpEntry entry .1.3.6.1.4.1.164.12.3.2.1.5.1

An entry in the ATM VP Alarm table.
ifIndex of the ATM layer.

Indexes

IF-MIBifIndex atmNteVpAlarmVpi

Column	Syntax	OID
atmNteVpAlarmVpi The VPI on which there is an active alarm.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.1.5.1.1`
atmNteVpActiveAlarms A Bit String of the active alarms on this VP. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. The meaning of the bits is as follows: 1 - VP AIS 2 - VP Loss Of Cont…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.1.5.1.2`

atmNteAlarmVcTable

table

.1.3.6.1.4.1.164.12.3.2.1.6 · 1 row entry · 3 columns

Open in standard view

The ATM VC Alarm table.

atmNteAlarmVcEntry entry .1.3.6.1.4.1.164.12.3.2.1.6.1

An entry in the ATM VC Alarm table.
ifIndex of the ATM layer.

Indexes

IF-MIBifIndex atmNteVcAlarmVpi atmNteVcAlarmVci

Column	Syntax	OID
atmNteVcAlarmVpi The VPI of the VC on which there is an active alarm.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.1.6.1.1`
atmNteVcAlarmVci The VCI of the VC on which there is an active alarm.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.1.6.1.2`
atmNteVcActiveAlarms A Bit String of the active alarms on this VC. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. The meaning of the bits is as follows: 1 - VC AIS 2 - VC Loss Of Cont…	SNMPv2-SMIInteger32 Constraints: `range: 256-4294967295` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.1.6.1.3`

atmLoopbackVpTable

table

.1.3.6.1.4.1.164.12.3.2.2.1 · 1 row entry · 8 columns

Open in standard view

This table contains parameters for an OAM VP loopback test.

atmLoopbackVpEntry entry .1.3.6.1.4.1.164.12.3.2.2.1.1

An entry in table atmLoopbackVpTable.

Indexes

atmLoopbackVpIfIndex atmLoopbackVpVpi

Column Syntax OID

atmLoopbackVpIfIndex

The interface index of the ATM layer.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.1.1.1

atmLoopbackVpVpi

The VPI of the OAM VPL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.1.1.2

atmLoopbackVpOperStatus

-noActive(1) means that the loopback test has not been activated for this VP.
-inProgress(2) means that the test has been activated and there is currently no problem.
-failed(3) means there was problem during the test o…

Enumeration

Enumerated Values:

1	noActive
2	inProgress
3	failed
4	endSuccessfully

.1.3.6.1.4.1.164.12.3.2.2.1.1.3

atmLoopbackVpCDV

Cell Delay Variation for this sampling.

SNMPv2-SMIInteger32

Constraints:
range: 256-4294967295

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.1.1.4

atmLoopbackVpAverageDelay

Average delay without including lost cells.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.1.1.5

atmLoopbackVpMaxDelay

Maximum delay without including lost cells.

SNMPv2-SMIInteger32

Constraints:
range: 8-512

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.1.1.6

atmLoopbackVpMinDelay

Minimum delay.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.1.1.7

atmLoopbackVpErrSessions

Errored Sessions. Will be updated once in 5 seconds.

SNMPv2-SMIInteger32

Constraints:
range: 8-512

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.1.1.8

atmLoopbackVcTable

table

.1.3.6.1.4.1.164.12.3.2.2.2 · 1 row entry · 9 columns

Open in standard view

This table contains parameters for an OAM VC loopback test.

atmLoopbackVcEntry entry .1.3.6.1.4.1.164.12.3.2.2.2.1

An entry in table.

Indexes

atmLoopbackVcIfIndex WING-MIBwingCfgDevMac atmLoopbackVcVpi atmLoopbackVcVci

Column Syntax OID

atmLoopbackVcIfIndex

The interface index of the ATM layer.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.2.1.1

atmLoopbackVcVpi

The VPI of the OAM VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.2.1.2

atmLoopbackVcVci

The VCI of the OAM VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.2.1.3

atmLoopbackVcOperStatus

Enumeration

Enumerated Values:

1	noActive
2	inProgress
3	failed
4	endSuccessfully

.1.3.6.1.4.1.164.12.3.2.2.2.1.4

atmLoopbackVcCDV

Cell Delay Variation for this sampling.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.2.1.5

atmLoopbackVcAverageDelay

Average delay without including lost cells.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.2.1.6

atmLoopbackVcMaxDelay

The maximum delay without including lost cells.

SNMPv2-SMIInteger32

Constraints:
range: 8-21

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.2.1.7

atmLoopbackVcMinDelay

The minimum delay.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.2.1.8

atmLoopbackVcErrSessions

Errored Sessions. Will be updated once in 5 seconds.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.2.1.9

atmLoopbackVpIvlTable

table

.1.3.6.1.4.1.164.12.3.2.2.3 · 1 row entry · 9 columns

Open in standard view

This table contains parameters for an OAM VP loopback test,
according interval number.

atmLoopbackVpIvlEntry entry .1.3.6.1.4.1.164.12.3.2.2.3.1

An entry in table.

Indexes

atmLoopbackVpIvlIfIndex atmLoopbackVpIvlVpi atmLoopbackVpIvlIvl

Column Syntax OID

atmLoopbackVpIvlIfIndex

The interface index of the ATM layer.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.3.1.1

atmLoopbackVpIvlVpi

The VPI of the OAM VPL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.3.1.2

atmLoopbackVpIvlIvl

The relevant interval number.

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.164.12.3.2.2.3.1.3

atmLoopbackVpIvlOperStatus

-noActive(1) means that the loopback test has not been activated for this VP during this interval.
-inProgress(2) has no meaning for an ended interval.
-failed(3) means there was problem during the test or after having …

Enumeration

Enumerated Values:

1	noActive
2	inProgress
3	failed
4	endSuccessfully

.1.3.6.1.4.1.164.12.3.2.2.3.1.4

atmLoopbackVpIvlCDV

Cell Delay Variation for this interval.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.3.1.5

atmLoopbackVpIvlAverageDelay

Average delay without including lost cells for this interval.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.3.1.6

atmLoopbackVpIvlMaxDelay

The maximum delay without including lost cells for this interval.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.3.1.7

atmLoopbackVpIvlMinDelay

The minimum delay for this interval.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.3.1.8

atmLoopbackVpIvlErrSessions

Errored Sessions. Will be updated once in 5 seconds.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.3.1.9

atmLoopbackVcIvlTable

table

.1.3.6.1.4.1.164.12.3.2.2.4 · 1 row entry · 10 columns

Open in standard view

This table contains parameters for an OAM VC loopback test.

atmLoopbackVcIvlEntry entry .1.3.6.1.4.1.164.12.3.2.2.4.1

An entry in table.

Indexes

atmLoopbackVcIvlIfIndex atmLoopbackVcIvlVpi atmLoopbackVcIvlVci atmLoopbackVcIvlIvl

Column Syntax OID

atmLoopbackVcIvlIfIndex

The interface index of the ATM layer.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.4.1.1

atmLoopbackVcIvlVpi

The VPI of the OAM VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.4.1.2

atmLoopbackVcIvlVci

The VCI of the OAM VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.4.1.3

atmLoopbackVcIvlIvl

The relevant interval number.

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.164.12.3.2.2.4.1.4

atmLoopbackVcIvlOperStatus

-noActive(1) means that the loopback test has not been activated for this VC during this interval.
-inProgress(2) has no meaning per interval.
-failed(3) means there was problem for this test during this interval.
-endS…

Enumeration

Enumerated Values:

1	noActive
2	inProgress
3	failed
4	endSuccessfully

.1.3.6.1.4.1.164.12.3.2.2.4.1.5

atmLoopbackVcIvlCDV

Cell Delay Variation for this interval.

SNMPv2-SMIInteger32

Constraints:
range: 8-21

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.4.1.6

atmLoopbackVcIvlAverageDelay

Average delay without including lost cells.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.4.1.7

atmLoopbackVcIvlMaxDelay

The maximum delay without including lost cells.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.4.1.8

atmLoopbackVcIvlMinDelay

The minimum delay.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.4.1.9

atmLoopbackVcIvlErrSessions

Errored Sessions. Will be updated once in 5 seconds.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.4.1.10

atmVpPmTable

table

.1.3.6.1.4.1.164.12.3.2.3.1 · 1 row entry · 8 columns

Open in standard view

This table contains parameters for VP performance monitoring.

atmVpPmEntry entry .1.3.6.1.4.1.164.12.3.2.3.1.1

An entry in table.

Indexes

atmVpPmIfIndex WING-MIBwingCfgDevMac atmVpPmVpi WING-MIBwingCfgDevVpnIkev2RemoteNameServerType

Column Syntax OID

atmVpPmIfIndex

The interface index of the ATM layer.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.3.1.1.1

atmVpPmVpi

The VPI of the Performance Monitoring VPL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.3.1.1.2

atmVpPmAdminStatus

up(2) - Activate PM.
down(3) - Deactivate PM.
listenToActivationCells(4) - .
originateActivationCells(5) - .

Enumerationr/w

Enumerated Values:

2	up
3	down
4	listenToActivationCells
5	originateActivationCells

.1.3.6.1.4.1.164.12.3.2.3.1.1.3

atmVpPmDirection

The direction of PM.

Enumerationr/w

Enumerated Values:

2	source
3	destination
4	bidirectional

.1.3.6.1.4.1.164.12.3.2.3.1.1.4

atmVpPmBlockSize

Valid block sizes (in cells): 128, 256, 512, 1024, 2048, 4096,
8192, 16384, 32768.

SNMPv2-SMIInteger32r/w

Constraints:
range: 1-128

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.3.1.1.5

atmVpPmRowStatus

Creation/Deletion of rows in the table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.12.3.2.3.1.1.6

atmVpPmSink

off (1) - Deactivate PM.
fwd (2) - Activate Forward PM only.
fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.

Enumerationr/w

Enumerated Values:

1	off
2	fwd
3	fwdAndBwdReport

Constraints:
range: 8-21

.1.3.6.1.4.1.164.12.3.2.3.1.1.7

atmVpPmSource

off (1) - Deactivate PM.
fwd (2) - Activate Forward PM only.
fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.

Enumerationr/w

Enumerated Values:

1	off
2	fwd
3	fwdAndBwdReport

.1.3.6.1.4.1.164.12.3.2.3.1.1.8

atmVcPmTable

table

.1.3.6.1.4.1.164.12.3.2.3.2 · 1 row entry · 9 columns

Open in standard view

This table contains parameters for VC performance monitoring.

atmVcPmEntry entry .1.3.6.1.4.1.164.12.3.2.3.2.1

An entry in table.

Indexes

atmVcPmIfIndex WING-MIBwingCfgDevMac atmVcPmVpi WING-MIBwingCfgDevControllerHostIndex atmVcPmVci

Column Syntax OID

atmVcPmIfIndex

The interface index of the ATM layer.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.3.2.1.1

atmVcPmVpi

The VPI of the Performance Monitoring VCL.

SNMPv2-SMIInteger32

Enumerated Values:

1	active
4	createAndGo
6	destroy

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.3.2.1.2

atmVcPmVci

The VCI of the PM VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.3.2.1.3

atmVcPmAdminStatus

up(2) - Activate PM.
down(3) - Deactivate PM.
listenToActivationCells(4) - .
originateActivationCells(5) - .

Enumerationr/w

Enumerated Values:

2	up
3	down
4	listenToActivationCells
5	originateActivationCells

Constraints:
range: 1-2

.1.3.6.1.4.1.164.12.3.2.3.2.1.4

atmVcPmDirection

The direction of PM.

Enumerationr/w

Enumerated Values:

2	source
3	destination
4	bidirectional

Constraints:
range: 1-2

.1.3.6.1.4.1.164.12.3.2.3.2.1.5

atmVcPmBlockSize

Valid block sizes (in cells): 128, 256, 512, 1024, 2048, 4096,
8192, 16384, 32768.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.3.2.1.6

atmVcPmRowStatus

Creation/Deletion of rows in the table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.12.3.2.3.2.1.7

atmVcPmSink

off (1) - Deactivate PM.
fwd (2) - Activate Forward PM only.
fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.

Enumerationr/w

Enumerated Values:

1	off
2	fwd
3	fwdAndBwdReport

.1.3.6.1.4.1.164.12.3.2.3.2.1.8

atmVcPmSource

off (1) - Deactivate PM.
fwd (2) - Activate Forward PM only.
fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.

Enumerationr/w

Enumerated Values:

1	off
2	fwd
3	fwdAndBwdReport

Constraints:
range: 1-32

.1.3.6.1.4.1.164.12.3.2.3.2.1.9

atmNteMdlConfigTable

table

.1.3.6.1.4.1.164.12.3.3.1.1 · 1 row entry · 3 columns

Open in standard view

Module configuration table.

atmNteMdlConfigEntry entry .1.3.6.1.4.1.164.12.3.3.1.1.1

There is an entry in this table just for those modules that have
parameters that are relevant to module level only.

Indexes

atmNteMdlSlotIndex WING-MIBwingCfgDevMac WING-MIBwingCfgDevWlanVlanOverrideWlan

Column Syntax OID

atmNteMdlSlotIndex

The slot number.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.164.12.3.3.1.1.1.1

atmNteMdlPrtCpuSharing

This object lets the user decide what will be the CPU sharing
between the ports of the module. This object is applicable for
modules in which the same CPU handles the traffic of all ports.

equal - All p…

Enumerationr/w

Enumerated Values:

2	equal
3	port1

.1.3.6.1.4.1.164.12.3.3.1.1.1.2

atmNteMdlInputPriorityMechanism

This object allows the user to Enable/Disable the Input priority mechanism.
This object is applicable for modules with more than one port, in which the
total ports input may be greater than the port output.
…

Enumerationr/w

Enumerated Values:

2	disabled
3	enabled

.1.3.6.1.4.1.164.12.3.3.1.1.1.3

imaXLinkTable

table

.1.3.6.1.4.1.164.12.5.2 · 1 row entry · 2 columns

Open in standard view

The IMA Link Status and Configuration table.
This table contains additional objects for the link table.

imaXLinkEntry entry .1.3.6.1.4.1.164.12.5.2.1

An entry in the IMA Link table.

Indexes

imaLinkIfIndex

Column Syntax OID

imaLinkDirection

the Link direction.

Enumerationr/w

Enumerated Values:

1	rx
2	tx
3	both

.1.3.6.1.4.1.164.12.5.2.1.1

imaLinkItcLBClkSrc

Clock source for the current Tx-line.

Enumerationr/w

Enumerated Values:

1	link1
2	link2
3	link3
4	link4
5	internal
6	external
7	automatic
8	loopback

.1.3.6.1.4.1.164.12.5.2.1.2

imaXGroupTable

table

.1.3.6.1.4.1.164.12.5.3 · 1 row entry · 3 columns

Open in standard view

The IMA group Status and Configuration table.
This table contains additional objects for the Group table.

imaXGroupEntry entry .1.3.6.1.4.1.164.12.5.3.1

An entry in the IMA Group table.

Indexes

imaGroupIndex

Column Syntax OID

imaGroupVersion

IMA Version.

Enumerationr/w

Enumerated Values:

1	ver10
2	ver11

Constraints:
range: 3-100

.1.3.6.1.4.1.164.12.5.3.1.1

imaGroupCtcTxClkSrc

The source of the transmitted, common, Clock Source.
Applicable if imaGroupNeTxClkMode=ctc(1).
Automatic - Dynamic source, taken from the currently reference link.
Internal - taken from the Internal clock on card.
Loo…

Enumerationr/w

Enumerated Values:

1	link1
2	link2
3	link3
4	link4
5	internal
6	external
7	automatic
8	loopback
255	notApplicable

.1.3.6.1.4.1.164.12.5.3.1.2

imaGroupCtcTxClkSrcPort

This parameter is valid only when imaGroupCtcTxClkSrc=loopback.
The value may be any port identifier.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.5.3.1.3

atmLayer2XVclTable

table

.1.3.6.1.4.1.164.12.7.1 · 1 row entry · 2 columns

Open in standard view

This table is an extension of VCL table, which is created  
for each LAN VCC.

atmLayer2XVclEntry entry .1.3.6.1.4.1.164.12.7.1.1

Conceptual row in atmVclTable.
This table augments the RFC2515 VCL table.

Indexes

No indexes recorded

Column Syntax OID

atmLayer2XVclConnMode

Each valid LAN VCC is either Main or Sub.
This parameter is configured only once on creation of a LAN VCC.
It can not be changed after creation. In order to change the Mode,
user should delete the connection and creat…

Enumerationr/w

Enumerated Values:

1	main
2	sub

.1.3.6.1.4.1.164.12.7.1.1.1

atmLayer2XVclGroupIdx

The group identifier.
A VCC Group identifier = 0 if the VCC was not associated with a
group yet.
This value is updated according to the group identifier set by
atmLayer2GroupTable.

SNMPv2-SMIInteger32

Constraints:
range: 1-255

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.7.1.1.2

atmLayer2GroupTable

table

.1.3.6.1.4.1.164.12.7.2 · 1 row entry · 5 columns

Open in standard view

This table contains groups and their members.
A group is a bundle of VCCs, which acts as different queues.
Main and Sub VCCs should have the same ATM slot and port,
and the same LAN slot and port.
Each group contains: 1 to <number of priorities> VCCs.

atmLayer2GroupEntry entry .1.3.6.1.4.1.164.12.7.2.1

Conceptual row in atmLayer2GroupTable.
The indexes: ifIndex, atmVclVpi and atmVclVci indicate
the Network ATM End-Point.
Upon a group creation, one Main VCC must be added first.
After the group was created, Sub VCCs ma…

Indexes

atmLayer2GroupIdx IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci

Column Syntax OID

atmLayer2GroupIdx

The group identifier.
0 is not a valid index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.7.2.1.1

atmLayer2GroupRowStatus

Creation/Deletion of rows in the table, and indication of the
entry's status.

SNMPv2-TCRowStatusr/w

Constraints:
range: 1-255

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.12.7.2.1.2

atmLayer2GroupConnMode

Each valid LAN VCC is either Main or Sub as configured in
atmLayer2XVclTable.

Enumeration

Enumerated Values:

1	main
2	sub

Constraints:
range: 50-999

.1.3.6.1.4.1.164.12.7.2.1.3

atmLayer2GroupConnPriority

This parameter is configured by atmLayer2PriorityRx from
atmLayer2PriorityTable.
Each bit in the Octet represents a specific priority as follows:

MSB 7 6 5 4 …

OctetString

Constraints:
range: 1-1
range: 1-4095

.1.3.6.1.4.1.164.12.7.2.1.4

atmLayer2GroupName

Group name. Configured by the user.
The name is unique per system.
For atmLayer2GroupIdx=0, the name will be null.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.164.12.7.2.1.5

atmLayer2PriorityTable

table

.1.3.6.1.4.1.164.12.7.3 · 1 row entry · 5 columns

Open in standard view

This table maps all priorities inside a group.
Several priorities might be mapped to the same VCC. 
Upon priority change, the agent will update the VCCs of the 
changed priority in this table, and will update	-
atmLayer2GroupConnPriority parameter of both former and new owners 
of the changed priority.
Changing a VCC value is actually a change of three parameters
simultaneously: atmLayer2PriorityIfIndex, atmLayer2PriorityVclVpi
and atmLayer2PriorityVclVci. Otherwise, the set will be rejected,
since there might be that such VCC doesn't exist in the specific
group.

atmLayer2PriorityEntry entry .1.3.6.1.4.1.164.12.7.3.1

Conceptual row in atmLayer2PriorityTable.
Each entry is a Network ATM End-Point per priority.
Upon a group creation, all priorities are mapped to the Main VCC.
Number of entries per group is according to the number of …

Indexes

atmLayer2PriorityGroupIdx atmLayer2PriorityRx

Column	Syntax	OID
atmLayer2PriorityGroupIdx The group identifier.	SNMPv2-SMIInteger32 Constraints: `range: 1-253` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.7.3.1.1`
atmLayer2PriorityRx The priority values. The used values are 0-7, but since this value is part of the index of the table, and in order to avoid '0' as an index, the index syntax is 1..8, but the real value is atmLayer2PriorityRx-1: 0 …	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.164.12.7.3.1.2`
atmLayer2PriorityIfIndex ATM ifIndex of the network End-Point.	IF-MIBInterfaceIndexr/w Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.164.12.7.3.1.3`
atmLayer2PriorityVclVpi Vpi of the network End-Point.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.7.3.1.4`
atmLayer2PriorityVclVci Vci of the network End-Point.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.7.3.1.5`

atmLayer2CfgTable

table

.1.3.6.1.4.1.164.12.7.5 · 1 row entry · 9 columns

Open in standard view

Bridge configuration Table. This table supports multi-bridge 
and bridge features within an ATM device.

atmLayer2CfgEntry entry .1.3.6.1.4.1.164.12.7.5.1

Conceptual row in atmLayer2CfgTable.
Each entry in this table contains the bridging attributes for
both Ethernet and ATM sides.
The interface index is the Ethernet port interface.

For Ace52: this object rep…

Indexes

IF-MIBifIndex

Column Syntax OID

atmLayer2CfgBridgingMode

Bridging mode can be one of the following:
ATM <> Ethernet - Bridging is between the Ethernet
port and the ATM port (there is no bridging between VCs).
ATM <> Ethernet + ATM - Bridging is done both between
the Ethern…

Enumerationr/w

Enumerated Values:

1	accessOnly
2	accessAndSwitching

.1.3.6.1.4.1.164.12.7.5.1.1

atmLayer2CfgVlanMode

VLAN Mode. Upon Mode changing, all LAN VCCs will be deleted
by the agent from all tables that include LAN VCCs.

Enumerationr/w

Enumerated Values:

2	disable
3	enable

.1.3.6.1.4.1.164.12.7.5.1.2

atmLayer2CfgAtmAcceptableFrameType

The Frame Type that will be acceptable by the VCCs that
are associated with this Ethernet port.
Frames which don't match the selected type will be discarded.

admitAll - all frames will be acc…

Enumerationr/w

Enumerated Values:

1	notApplicable
2	admitAll
3	admitOnlyVlanTagged
4	admitOnlyUnTagged

Constraints:
range: 1-25

.1.3.6.1.4.1.164.12.7.5.1.3

atmLayer2CfgAtmIngressFiltering

For the VCCs that are associated with this Ethernet port,
when this is true(1) the device will discard incoming
frames for VLANs which do not include this Port in its
Member set. When false(2), the port will accept al…

SNMPv2-TCTruthValuer/w

Constraints:
range: 60-300

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.164.12.7.5.1.4

atmLayer2CfgAtmTxFrameType

The Frame Type that will be transmitted by the VCCs that
are associated with this Ethernet port.

unTagged - The transmitted frames will be unTagged.
tagged - The transmitted frames will be T…

Enumerationr/w

Enumerated Values:

1	notApplicable
2	unTagged
3	tagged

Constraints:
range: 1-3

.1.3.6.1.4.1.164.12.7.5.1.5

atmLayer2CfgEthAcceptableFrameType

The Frame Type that this Ethernet port will accept.
(for ACE-52: the Frame Type that this Bridge will accept)
This parameter is notApplicable for atmLayer2VlanMode=disable.
Frames which don't match the selected type wil…

Enumerationr/w

Enumerated Values:

1	notApplicable
2	admitAll
3	admitOnlyVlanTagged
4	admitOnlyUnTagged

Constraints:
range: 1-18000

.1.3.6.1.4.1.164.12.7.5.1.6

atmLayer2CfgBridgeAction

This object enables to perform the specified action on the
selected port.

Enumerationr/w

Enumerated Values:

7	deleteLanTable
255	noOp

Constraints:
range: 1-7

.1.3.6.1.4.1.164.12.7.5.1.7

atmLayer2CfgLearningMode

This object specifies the mode of the learning process of a bridge.
svl - Shared VLAN process. If an individual MAC Address is learned
in one VLAN, this information is used in forwarding decisions
taken for…

Enumerationr/w

Enumerated Values:

1	svl
2	ivl

.1.3.6.1.4.1.164.12.7.5.1.8

atmLayer2CfgAgingTime

The timeout period in seconds for aging out
dynamically learned forwarding information.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.7.5.1.9

frAtmIwfXConnectionTable

table

.1.3.6.1.4.1.164.12.8.1 · 1 row entry · 2 columns

Open in standard view

This table is an extension of frAtmIwfXConnectionTable from
RFC2955.

frAtmIwfXConnectionEntry entry .1.3.6.1.4.1.164.12.8.1.1

Conceptual row in frAtmIwfXConnectionTable.
This table augments the RFC2955.

Indexes

No indexes recorded

Column Syntax OID

frAtmIwfXConnMode

FR IWF Mode.
service - Service InterWorking (FRF.8),
network - Network InterWorking (FRF.5).

Enumerationr/w

Enumerated Values:

1	service
2	network

Constraints:
range: 1-4294967

.1.3.6.1.4.1.164.12.8.1.1.1

frAtmIwfXConnSscsDlci

This parameter is relevant for
frAtmIwfXConnMode=network (FRF.5) only.
This parameter allow configuration of the
FR SSCS DLCI that is transferred to the
remote FR unit.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.8.1.1.2

atmCesAal1CurrentTable

table

.1.3.6.1.4.1.164.12.9.1.1 · 1 row entry · 6 columns

Open in standard view

The AAL1 Current table.

atmCesAal1CurrentEntry entry .1.3.6.1.4.1.164.12.9.1.1.1

An entry in the AAL1 Current table.

Indexes

atmCesAal1CurrentIfIndex

Column	Syntax	OID
atmCesAal1CurrentIfIndex The index of the AAL1 interface. It may be ifIndex.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.9.1.1.1.1`
atmCesAal1CurrentSeqErrors The counter associated with the number of Discarded cells due to wrong sequence number, encountered by an AAL1 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 1-8000` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.9.1.1.1.2`
atmCesAal1CurrentHdrErrors The counter associated with the number of Discarded cells due to bad AAL1 header error (including correctable and uncorrectable CRC, and bad parity), encountered by an AAL1 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 1-4294967295` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.9.1.1.1.3`
atmCesAal1CurrentPointerReframes The counter associated with the number of events in which a SDT pointer isn't where it is expected to be, and must be reacquired, encountered by an AAL1 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 1-32` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.9.1.1.1.4`
atmCesAal1CurrentBufUnderflows The counter associated with the number of buffer underflow events, encountered by an AAL1 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 1-3600` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.9.1.1.1.5`
atmCesAal1CurrentBufOverflows The counter associated with the number of buffer overflow events, encountered by an AAL1 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 1-86400` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.9.1.1.1.6`

atmCesAal1IntervalTable

table

.1.3.6.1.4.1.164.12.9.1.2 · 1 row entry · 7 columns

Open in standard view

The AAL1 Interval table.

atmCesAal1IntervalEntry entry .1.3.6.1.4.1.164.12.9.1.2.1

An entry in the AAL1 Interval table.

Indexes

atmCesAal1IntervalIfIndex WING-MIBwingCfgDevMac atmCesAal1IntervalNumber WING-MIBwingCfgDevDynRouteOspfNetwork

Column	Syntax	OID
atmCesAal1IntervalIfIndex The index of the AAL1 interface. It may be ifIndex.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.9.1.2.1.1`
atmCesAal1IntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals exist).	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.164.12.9.1.2.1.2`
atmCesAal1IntervalSeqErrors The counter associated with the number of Discarded cells due to wrong sequence number, encountered by an AAL1 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.9.1.2.1.3`
atmCesAal1IntervalHdrErrors The counter associated with the number of Discarded cells due to bad AAL1 header error (including correctable and uncorrectable CRC, plus bad parity), encountered by an AAL1 interface in one of the previous 96, indi…	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.9.1.2.1.4`
atmCesAal1IntervalPointerReframes The counter associated with the number of events in which a SDT pointer isn't where it is expected to be, and must be reacquired, encountered by an AAL1 interface in one of the previous 96, individual 15 minute, int…	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.9.1.2.1.5`
atmCesAal1IntervalBufUnderflows The counter associated with the number of buffer underflow events, encountered by an AAL1 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.9.1.2.1.6`
atmCesAal1IntervalBufOverflows The counter associated with the number of buffer overflow events, encountered by an AAL1 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.9.1.2.1.7`

atmCesXConfTable

table

.1.3.6.1.4.1.164.12.9.2.1 · 1 row entry · 1 columns

Open in standard view

This table is an extension of atmfCESConfTable table.

atmCesXConfEntry entry .1.3.6.1.4.1.164.12.9.2.1.1

Conceptual row in atmfCESConfTable.
A new row is created in this table upon each new CES VCC creation.

Indexes

No indexes recorded

Column Syntax OID

atmCesXConfCBRMode

This parameter defines if to use Spaced or Normal CBR.

Normal - TD will be allocated from the policing range (described
in ACE2002 NMS SRS). The PCR is expanded with a constant
value…

Enumerationr/w

Enumerated Values:

2	normal
3	spaced

.1.3.6.1.4.1.164.12.9.2.1.1.1

atmIpoaLisIfMappingXTable

table

.1.3.6.1.4.1.164.12.10.1 · 1 row entry · 2 columns

Open in standard view

This table is an extension of a table 
from RFC 2320: ipoaLisIfMappingTable - 
The ATM Logical IP Subnet Interface Mapping Table.

atmIpoaLisIfMappingXEntry entry .1.3.6.1.4.1.164.12.10.1.1

Conceptual row in ipoaLisIfMappingTable.

Indexes

WING-MIBwingCfgDevMac

Column Syntax OID

atmIpoaLisIfMappingType

This object indicates the Mapping Type.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	static
3	inAtmArp

.1.3.6.1.4.1.164.12.10.1.1.1

atmIpoaLisIfMappingIPAddress

This parameter is applicable for
atmIpoaLisIfMappingTypeIP=static(2).
This parameter is the IP Address assigned
by the user when applicable.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.12.10.1.1.2