atmConfIfFrameType
ACE2002-MIB ·
.1.3.6.1.4.1.164.12.3.2.1.1.1.3
Object
column
r/w
Enumeration
The frame type. Valid values for a 155M interface: sonet(2), sdh(3). Valid values for a T3 interface: direct(4), plcpInternal(5), plcpExternal(6), directNoScrmbling(10), plcpInternalNoScrmbling(11), plcpExternalNoScrmbling(12). Valid values for Ethernet interface: ethCrcTrans (8), ethCrcNotTrans(9). (DS1 interfaces frame type is specified in the DSX1 mib).
Context
- MIB
- ACE2002-MIB
- OID
.1.3.6.1.4.1.164.12.3.2.1.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- atmNteConfIfEntry
- Table
- atmNteConfIfTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | sonet |
3 | sdh |
4 | direct |
5 | plcpInternal |
6 | plcpExternal |
7 | e3 |
8 | ethCrcTrans |
9 | ethCrcNotTrans |
10 | directNoScrmbling |
11 | plcpInternalNoScrmbling |
12 | plcpExternalNoScrmbling |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmConfIfTransmitClk The transmit clock of the port. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.1 |
| atmConfIfAllocatedBw Total VC Bandwidth Allocation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.2.1.1.1.10 |
| atmConfIfLowerVpi The Lower possible VPI. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.2.1.1.1.11 |
| atmConfIfOamMode OAM support Mode, which determines the
interface's location in a segment wise. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.12 |
| atmConfIfLoopback Interface Loopback. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.2 |
| atmConfIfCardType deprecated The card type. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.4 |
| atmConfAtmIfVpiVciLimit The limit on the sum of the VPI+VCI bits for this interface. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.5 |
| atmConfIfHwFeatures HW features command. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.6 |
| atmConfIfOutputRate This parameter indicates the output rate in cells/sec, which is
supported per port. Successfully setting this parameter
is dependent on all other ports values calculations,
whi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.2.1.1.1.7 |
| atmConfIfInputRate This parameter indicates the input rate in cells/sec, which is
supported per port. Successfully setting this parameter
is dependent on all other ports values calculations,
whic… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.2.1.1.1.8 |
| atmConfAlarmForwarding Enables Path AIS Alarm forwarding upon a failure detection. The
following might be considered as a failure: LOS, LOF, LOC, SLM,
LOP, Path AIS and Line AIS.
disabl… | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| WING-MIBwingCfgDevMac XPath: /wing-config/device[mac=key1]/mac | column | SNMPv2-TCMacAddress | .0.50.1.3.18.1.1.1 |
| WING-MIBwingCfgDevVpnIkev2Name XPath: /wing-config/device[mac=key1]/ikev2_policy[name=key2]/name | column | WingIdentifier | .0.50.1.3.18.19.4.1.1 |
| WING-MIBwingCfgDevVpnIkev2IsakmpName XPath: /wing-config/device[mac=key1]/ikev2_policy[name=key2]/isakmp_proposal[name=key3]/name | column | WingIdentifier | .0.50.1.3.18.19.5.1.1 |