atmConfVcCCDirection
ACE2002-MIB ·
.1.3.6.1.4.1.164.12.3.2.1.4.1.6
Object
column
r/w
Enumeration
both(2) - Agent send OAM CC cells and check receivev OAM CC cells none(3) - Agent does not send and does not check received OAM CC cells. source(4)- Agent send OAM CC cells. sink(5) - Agent checks received OAM CC cells.
Context
- MIB
- ACE2002-MIB
- OID
.1.3.6.1.4.1.164.12.3.2.1.4.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- atmNteConfVcEntry
- Table
- atmNteConfVcTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | both |
3 | none |
4 | source |
5 | sink |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmConfVcPolicing Policing method desired for this VCL. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.4.1.1 |
| atmConfVcCCOperStatus initial (1) - The CC activation process is not started.
up (2) - Continuity Check (CC) activated.
down (3) - CC deactivated.
source (4) - OAM CC(Continuity Check) of local agen… | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.4.1.10 |
| atmConfVcLoopbackTraffic This parameter has both command and status meanings:
off(2) - Set to 'Off' will Stop traffic loop. Getting this
value means that the loop is not running.
on (3) - Set to … | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.4.1.11 |
| atmConfVcLoopbackFailureInd This object allows user to define the Indication that will be created upon
a LB cell failure.
disabled(2) - no indication will be created.
segmentAis(3) - will cause Tx of a segm… | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.4.1.12 |
| atmConfVcLoopbackFailureThreshold The number of the LB failures before starting transmission of the
Indication defined by atmConfVcLoopbackFailureInd.
Range: 1..16. Default: 1. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.2.1.4.1.13 |
| atmConfVcOamDirection The direction of OAM cell insertion.
downStream(2) - The OAM cell will be inserted in downStream.
upStream(3) - The OAM cell will be inserted in upStream. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.4.1.14 |
| atmConfVcName VC Name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.12.3.2.1.4.1.15 |
| atmConfVcConnected This object indicates whether this VC is connected. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.4.1.16 |
| atmConfVcCCAdminStatus up(2) - Activate Continuity Check (CC).
down(3) - Deactivate CC.
source(4) - Activate OAM CC(Continuity Check) of local agent
( start sending Oam cells to the remot… | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.4.1.2 |
| atmConfVcLoopbackAdminStatus up(2) - Start loopback OAM cells.
down(3) - Stop sending loopback OAM cells.
For ace2002:
up(2) - Transmitting LB cells with llid all ones
(i.e. FFFF..… | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.4.1.3 |
| atmConfVcLoopbackSinkAddress Destination address.
For ace101: 2 bytes are used.
For ace2002: 16 bytes are used. | column | OctetString | .1.3.6.1.4.1.164.12.3.2.1.4.1.4 |
| atmConfVcCongestionControl Each bit indicates a selection of one option
as the following description. All combinations
are possible and legal.
The codes are:
1 - EPD
2 - CLP
4 - EFCI.
For ace2002:
1 - P… | column | OctetString | .1.3.6.1.4.1.164.12.3.2.1.4.1.5 |
| atmConfVcCreationTime A date-time in which the VC was created. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.164.12.3.2.1.4.1.7 |
| atmConfVcOamSupport OAM support mode, which determines the device location
in a segment wise.
segmentAndEndToEnd - In this mode the OAM cells are generated
befor… | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.4.1.8 |
| atmConfVcCCActivationCtrl manual(1) - CC Activation process is disable
activator(2) - ACE-101 initiate CC Activation process
listener(3) - ACE-101 wait to CC Activation request from remote side. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.4.1.9 |