ZYXELVDSL Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

136

accessSwitchVdslLineTable

table

.1.3.6.1.4.1.890.1.5.12.1.1.1.1 · 1 row entry · 4 columns

Open in standard view

This table includes common attributes describing both ends of the line.

accessSwitchVdslLineEntry entry .1.3.6.1.4.1.890.1.5.12.1.1.1.1.1

An entry in the accessSwitchVdslLineTable.

Indexes

ifIndex

Column Syntax OID

accessSwitchVdslLineCoding

Specifies the VDSL coding type used on this line.

Enumeration

Enumerated Values:

1	other
2	dmt
3	cap
4	qam

.1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.1

accessSwitchVdslLineDiscCount

Count of the number of disconnection failures since agent reset.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.2

accessSwitchVdslLineConfProfile

The value of this object identifies the row
in the VDSL Line Configuration Profile Table,
(accessSwitchVdslLineConfProfileTable), which applies for this
VDSL line.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.3

accessSwitchVdslLineType

Defines the type of VDSL physical line
entity that exists, by defining whether and how
the line is channelized. If the line is channelized,
the value will be other than no_channel(1). This
object defines which channel …

Enumeration

Enumerated Values:

1	no_channel
2	fast_channel_only
3	slow_channel_only
4	fast_or_slow_channel
5	fast_and_slow_channel

.1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.4

accessSwitchVdslVtuoPhysTable

table

.1.3.6.1.4.1.890.1.5.12.1.1.1.2 · 1 row entry · 10 columns

Open in standard view

This table provides one row for each VTU-O.
Each row contains the physical layer parameters for that VTU-O.

accessSwitchVdslVtuoPhysEntry entry .1.3.6.1.4.1.890.1.5.12.1.1.1.2.1

An entry in the accessSwitchVdslVtuoPhysTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslVtuoCurrSnrMgn Noise Margin as seen by this VTU with respect to its received signal in 0.01dB.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.1`
accessSwitchVdslVtuoCurrMse Minimum Square Error as seen by this VTU with respect to its received signal in 0.01dB.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.2`
accessSwitchVdslVtuoCurrPsd Power Spectral Density as seen by this VTU with respect to its received signal in -0.01dBm/Hz.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.3`
accessSwitchVdslVtuoCurrRsErr Reed-Solomon error counted by this VTU with respect to its received signal.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.4`
accessSwitchVdslVtuoCurrAtn Measured difference in the total power transmitted by the peer VTU and the total power received by this VTU.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.5`
accessSwitchVdslVtuoCurrOutputPwr Measured total output power in 0.01dBm transmitted by this VTU.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.6`
accessSwitchVdslVtuoCurrRate Actual transmission rate in bits-per-second on this line.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.7`
accessSwitchVdslVtuoChanCurrLineRate Actual transmit rate of downstream from VTUC. This value is in units of bps.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.8`
accessSwitchVdslVtuoCurrAttainableRate Indicates the maximum mandatoryly attainable data rate in bits-per-second by the VTU. This value will be equal or greater than the mandatory line rate.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.9`
accessSwitchVdslVtuoCurrStatus Indicates mandatory state of the VTU-O line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1 lossO…	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.10`

accessSwitchVdslVturPhysTable

table

.1.3.6.1.4.1.890.1.5.12.1.1.1.3 · 1 row entry · 10 columns

Open in standard view

This table provides one row for each VTU-R.
Each row contains the physical layer parameters for that VTU-R.

accessSwitchVdslVturPhysEntry entry .1.3.6.1.4.1.890.1.5.12.1.1.1.3.1

An entry in the accessSwitchVdslVturPhysTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslVturCurrSnrMgn Noise Margin as seen by this VTU with respect to its received signal in 0.01dB.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.1`
accessSwitchVdslVturCurrMse Minimum Square Error as seen by this VTU with respect to its received signal in 0.01dB.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.2`
accessSwitchVdslVturCurrPsd Power Spectral Density as seen by this VTU with respect to its received signal in -0.01dBm/Hz.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.3`
accessSwitchVdslVturCurrRsErr Reed-Solomon error counted by this VTU with respect to its received signal.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.4`
accessSwitchVdslVturCurrAtn Measured difference in the total power transmitted by the peer VTU and the total power received by this VTU.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.5`
accessSwitchVdslVturCurrOutputPwr Measured total output power in 0.01dBm transmitted by this VTU.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.6`
accessSwitchVdslVturCurrRate Actual transmission rate in bits-per-second on this line.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.7`
accessSwitchVdslVturChanCurrLineRate Actual transmit rate of upstream from VTUR. This value is in units of bps.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.8`
accessSwitchVdslVturCurrAttainableRate Indicates the maximum mandatoryly attainable data rate in bits-per-second by the VTU. This value will be equal or greater than the mandatory line rate.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.9`
accessSwitchVdslVturCurrStatus Indicates mandatory state of the VTU-R line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1 lossO…	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.10`

accessSwitchVdslVtuoInventoryTable

table

.1.3.6.1.4.1.890.1.5.12.1.1.1.4 · 1 row entry · 3 columns

Open in standard view

This table provides one row for each VTU-O.
Each row contains the inventory parameters for that VTU-O.

accessSwitchVdslVtuoInventoryEntry entry .1.3.6.1.4.1.890.1.5.12.1.1.1.4.1

An entry in the accessSwitchVdslVtuoInventoryTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslVtuoInvSerialNumber The vendor specific string that identifies the vendor equipment.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.4.1.1`
accessSwitchVdslVtuoInvVendorID The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.4.1.2`
accessSwitchVdslVtuoInvVersionNumber The vendor specific version number sent by this VTU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed as readable characters.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.4.1.3`

accessSwitchVdslVturInventoryTable

table

.1.3.6.1.4.1.890.1.5.12.1.1.1.5 · 1 row entry · 3 columns

Open in standard view

This table provides one row for each VTU-R.
Each row contains the inventory parameters for that VTU-R.

accessSwitchVdslVturInventoryEntry entry .1.3.6.1.4.1.890.1.5.12.1.1.1.5.1

An entry in the accessSwitchVdslVturInventoryTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslVturInvSerialNumber The vendor specific string that identifies the vendor equipment.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.5.1.1`
accessSwitchVdslVturInvVendorID The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.5.1.2`
accessSwitchVdslVturInvVersionNumber The vendor specific version number sent by this VTU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed as readable characters.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.5.1.3`

accessSwitchVdslVtuoPerfDataTable

table

.1.3.6.1.4.1.890.1.5.12.1.1.1.6 · 1 row entry · 31 columns

Open in standard view

This table provides one row for each VTU-O.

accessSwitchVdslVtuoPerfDataEntry entry .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1

An entry in accessSwitchVdslVtuoPerfDataTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslVtuoPerfLofs Count of the number of Loss of Framing failures since agent reset.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.1`
accessSwitchVdslVtuoPerfLoss Count of the number of Loss of Signal failures since agent reset.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.2`
accessSwitchVdslVtuoPerfLols Count of the number of Loss of Link failures since agent reset.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.3`
accessSwitchVdslVtuoPerfLprs Count of the number of Loss of Power failures since agent reset.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.4`
accessSwitchVdslVtuoPerfESs Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.5`
accessSwitchVdslVtuoPerfInits Count of the line initialization attempts since agent reset. Includes both successful and failed attempts.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.6`
accessSwitchVdslVtuoPerfValidIntervals The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started withi…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.7`
accessSwitchVdslVtuoPerfInvalidIntervals The number of intervals in the range from 0 to the value of accessSwitchVdslVtuoPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.8`
accessSwitchVdslVtuoPerfCurr15MinTimeElapsed Total elapsed seconds in this interval.	Unsigned32 Constraints: `range: 0-899`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.9`
accessSwitchVdslVtuoPerfCurr15MinLofs Count of seconds in the mandatory 15 minute interval when there was Loss of Framing.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.10`
accessSwitchVdslVtuoPerfCurr15MinLoss Count of seconds in the mandatory 15 minute interval when there was Loss of Signal.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.11`
accessSwitchVdslVtuoPerfCurr15MinLols Count of seconds in the mandatory 15 minute interval when there was Loss of Link.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.12`
accessSwitchVdslVtuoPerfCurr15MinLprs Count of seconds in the mandatory 15 minute interval when there was Loss of Power.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.13`
accessSwitchVdslVtuoPerfCurr15MinESs Count of Errored Seconds in the mandatory 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.14`
accessSwitchVdslVtuoPerfCurr15MinInits Count of the line initialization attempts in the mandatory 15 minute interval. Includes both successful and failed attempts.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.15`
accessSwitchVdslVtuoPerfCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the mandatory 1-day interval.	Unsigned32 Constraints: `range: 0-86399`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.16`
accessSwitchVdslVtuoPerfCurr1DayLofs Count of the number of seconds when there was Loss of Framing during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.17`
accessSwitchVdslVtuoPerfCurr1DayLoss Count of the number of seconds when there was Loss of Signal during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.18`
accessSwitchVdslVtuoPerfCurr1DayLols Count of the number of seconds when there was Loss of Link during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.19`
accessSwitchVdslVtuoPerfCurr1DayLprs Count of the number of seconds when there was Loss of Power during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.20`
accessSwitchVdslVtuoPerfCurr1DayESs Count of Errored Seconds during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one …	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.21`
accessSwitchVdslVtuoPerfCurr1DayInits Count of the line initialization attempts in the day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed. Includes both successful and failed attempts.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.22`
accessSwitchVdslVtuoPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	Integer32 Constraints: `range: 0-86400`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.23`
accessSwitchVdslVtuoPerfPrev1DayLofs Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.24`
accessSwitchVdslVtuoPerfPrev1DayLoss Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.25`
accessSwitchVdslVtuoPerfPrev1DayLols Count of seconds in the interval when there was Loss of Link within the most recent previous 1-day period.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.26`
accessSwitchVdslVtuoPerfPrev1DayLprs Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.27`
accessSwitchVdslVtuoPerfPrev1DayESs Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.28`
accessSwitchVdslVtuoPerfPrev1DayInits Count of the line initialization attempts in the most recent previous 1-day period. Includes both successful and failed attempts.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.29`
accessSwitchVdslVtuoPerfBerr Count of the number of Over limited error sencond since agent reset.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.30`
accessSwitchVdslVtuoPerfBmin Count of the number of Under Min Margin since agent reset.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.31`

accessSwitchVdslVturPerfDataTable

table

.1.3.6.1.4.1.890.1.5.12.1.1.1.7 · 1 row entry · 23 columns

Open in standard view

This table provides one row for each VTU-R.

accessSwitchVdslVturPerfDataEntry entry .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1

An entry in accessSwitchVdslVturPerfDataTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslVturPerfLofs Count of the number of Loss of Framing failures since agent reset.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.1`
accessSwitchVdslVturPerfLoss Count of the number of Loss of Signal failures since agent reset.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.2`
accessSwitchVdslVturPerfLprs Count of the number of Loss of Power failures since agent reset.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.3`
accessSwitchVdslVturPerfESs Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.4`
accessSwitchVdslVturPerfValidIntervals The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started withi…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.5`
accessSwitchVdslVturPerfInvalidIntervals The number of intervals in the range from 0 to the value of accessSwitchVdslVturPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.6`
accessSwitchVdslVturPerfCurr15MinTimeElapsed Total elapsed seconds in this interval.	Unsigned32 Constraints: `range: 0-899`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.7`
accessSwitchVdslVturPerfCurr15MinLofs Count of seconds in the mandatory 15 minute interval when there was Loss of Framing.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.8`
accessSwitchVdslVturPerfCurr15MinLoss Count of seconds in the mandatory 15 minute interval when there was Loss of Signal.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.9`
accessSwitchVdslVturPerfCurr15MinLprs Count of seconds in the mandatory 15 minute interval when there was Loss of Power.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.10`
accessSwitchVdslVturPerfCurr15MinESs Count of Errored Seconds in the mandatory 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.11`
accessSwitchVdslVturPerfCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the mandatory 1-day interval.	Unsigned32 Constraints: `range: 0-86399`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.12`
accessSwitchVdslVturPerfCurr1DayLofs Count of the number of seconds when there was Loss of Framing during the mandatory day as measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.13`
accessSwitchVdslVturPerfCurr1DayLoss Count of the number of seconds when there was Loss of Signal during the mandatory day as measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.14`
accessSwitchVdslVturPerfCurr1DayLprs Count of the number of seconds when there was Loss of Power during the mandatory day as measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.15`
accessSwitchVdslVturPerfCurr1DayESs Count of Errored Seconds during the mandatory day as measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one …	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.16`
accessSwitchVdslVturPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	Integer32 Constraints: `range: 0-86400`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.17`
accessSwitchVdslVturPerfPrev1DayLofs Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.18`
accessSwitchVdslVturPerfPrev1DayLoss Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.19`
accessSwitchVdslVturPerfPrev1DayLprs Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.20`
accessSwitchVdslVturPerfPrev1DayESs Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.21`
accessSwitchVdslVturPerfBerr Count of the number of Over limited error seconds agent reset.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.22`
accessSwitchVdslVturPerfBmin Count of the number of Under Min Margin since agent reset.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.23`

accessSwitchVdslVtuoIntervalTable

table

.1.3.6.1.4.1.890.1.5.12.1.1.1.8 · 1 row entry · 10 columns

Open in standard view

This table provides one row for each VTU-O
performance data collection interval.

accessSwitchVdslVtuoIntervalEntry entry .1.3.6.1.4.1.890.1.5.12.1.1.1.8.1

An entry in the accessSwitchVdslVtuoIntervalTable.

Indexes

ifIndex accessSwitchVdslVtuoIntervalNumber

Column Syntax OID

accessSwitchVdslVtuoIntervalNumber

Performance Data Interval number 1 is the
the most recent previous interval; interval
96 is 24 hours ago. Intervals 2..96 are
optional.

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.1

accessSwitchVdslVtuoIntervalLofs

Count of seconds in the interval when there was Loss
of Framing.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.2

accessSwitchVdslVtuoIntervalLoss

Count of seconds in the interval when there was Loss
of Signal.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.3

accessSwitchVdslVtuoIntervalLols

Count of seconds in the interval when there was Loss
of Link.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.4

accessSwitchVdslVtuoIntervalLprs

Count of seconds in the interval when there was Loss
of Power.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.5

accessSwitchVdslVtuoIntervalESs

Count of Errored Seconds in the interval.
The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.6

accessSwitchVdslVtuoIntervalInits

Count of the line initialization attempts
during the interval. Includes both successful
and failed attempts.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.7

accessSwitchVdslVtuoIntervalValidData

This variable indicates if the data for this
interval is valid.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.8

accessSwitchVdslVtucIntervalBerr

No of times in the interval when there was Over errored seconds.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.9

accessSwitchVdslVtucIntervalBmin

No of times in the interval when there was Under Min Margin.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.10

accessSwitchVdslVturIntervalTable

table

.1.3.6.1.4.1.890.1.5.12.1.1.1.9 · 1 row entry · 8 columns

Open in standard view

This table provides one row for each VTU-R
performance data collection interval.

accessSwitchVdslVturIntervalEntry entry .1.3.6.1.4.1.890.1.5.12.1.1.1.9.1

An entry in the accessSwitchVdslVturIntervalTable.

Indexes

ifIndex accessSwitchVdslVturIntervalNumber

Column Syntax OID

accessSwitchVdslVturIntervalNumber

Performance Data Interval number 1 is the
the most recent previous interval; interval
96 is 24 hours ago. Intervals 2..96 are
optional.

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.1

accessSwitchVdslVturIntervalLofs

Count of seconds in the interval when there was Loss
of Framing.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.2

accessSwitchVdslVturIntervalLoss

Count of seconds in the interval when there was Loss
of Signal.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.3

accessSwitchVdslVturIntervalLprs

Count of seconds in the interval when there was Loss
of Power.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.4

accessSwitchVdslVturIntervalESs

Count of Errored Seconds in the interval.
The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.5

accessSwitchVdslVturIntervalValidData

This variable indicates if the data for this
interval is valid.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.6

accessSwitchVdslVturIntervalBerr

No of times in the interval when there was Over limited error seconds.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.7

accessSwitchVdslVturIntervalBmin

No of times in the interval when there was Under Min Margin.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.8

accessSwitchVdslLineConfProfileTable

table

.1.3.6.1.4.1.890.1.5.12.1.1.1.10 · 1 row entry · 28 columns

Open in standard view

This table contains information on the VDSL line
configuration. One entry in this table reflects a
profile which can be used to configure the VDSL line.

accessSwitchVdslLineConfProfileEntry entry .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1

Each entry consists of a list of parameters that
represents the configuration of an VDSL modem.

When `dynamic' profiles are implemented, a default
profile will always exist. This profile's name will
be set…

Indexes

accessSwitchVdslLineConfProfileName

Column Syntax OID

accessSwitchVdslLineConfProfileName

This object is used by the line configuration table
in order to identify a row of this table.

When `dynamic' profiles are implemented, the profile
name is user specified. Also, the system will always
pro…

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.1

accessSwitchVdslLineConfMode

Specifies the VDSL mode type used on this line.

Enumeration

Enumerated Values:

0	tenBase-S
1	ansi
2	etsi

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.2

accessSwitchVdslVtuoConfRate

Transmission rate in bits-per-second specified by this VTU.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.3

accessSwitchVdslVtuoConfTargetSnrMgn

Configured Target Signal/Noise Margin in 0.01dB.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.4

accessSwitchVdslVtuoConfMaxSnrMgn

Configured Maximum acceptable Signal/Noise Margin in 0.01dB.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.5

accessSwitchVdslVtuoConfMinSnrMgn

Configured Minimum acceptable Signal/Noise Margin in 0.01dB.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not possible the modem will attempt to
re-initi…

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.6

accessSwitchVdslVturConfRate

Transmission rate in bits-per-second specified by this VTU.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.7

accessSwitchVdslVturConfTargetSnrMgn

Configured Target Signal/Noise Margin in 0.01dB.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.8

accessSwitchVdslVturConfMaxSnrMgn

Configured Maximum acceptable Signal/Noise Margin in 0.01dB.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.9

accessSwitchVdslVturConfMinSnrMgn

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.10

accessSwitchVdslLineConfProfileRowStatus

This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to
`active'. When `active' is set, the system
will validate the profile.
…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.11

accessSwitchVdslVtuoConfInterleaveMaxLineRate

Configured Maximum Transmit payload rate for `Interleave' channels, in bps.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.14

accessSwitchVdslVtuoConfInterleaveMinLineRate

Configured Minimum Transmit payload rate for `Interleave' channels, in bps.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.15

accessSwitchVdslVtuoConfMaxInterleaveDelay

Configured max. interleave delay of downstream.
This value is in units of 0.5 ms.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.16

accessSwitchVdslVturConfInterleaveMaxLineRate

Configured Minimum Transmit payload rate for `Interleave' channels, in bps.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.17

accessSwitchVdslVturConfInterleaveMinLineRate

Configured Minimum Transmit payload rate for `Interleave' channels, in bps.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.18

accessSwitchVdslVturConfMaxInterleaveDelay

Configured max. interleave delay of downstream.
This value is in units of 0.5 ms.

Integer32

Constraints:
range: 0-62

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.19

accessSwitchVdslConfRFI

Set RFI Band function as disabled, standard or custom.

Enumeration

Enumerated Values:

0	disabled
1	standard
2	custom

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.20

accessSwitchVdslRFIBand1Low

Configured low of RFIBand1 function when custom RFI Band is used.

Integer32

Constraints:
range: 0-2560

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.21

accessSwitchVdslRFIBand1High

onfigured high of RFIBand1 function when custom RFI Band is used.

Integer32

Constraints:
range: 0-2560

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.22

accessSwitchVdslRFIBand2Low

Configured low of RFIBand2 function when custom RFI Band is used.

Integer32

Constraints:
range: 0-2560

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.23

accessSwitchVdslRFIBand2High

Configured high of RFIBand2 function when custom RFI Band is used.

Integer32

Constraints:
range: 0-2560

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.24

accessSwitchVdslRFIBand3Low

Configured low of RFIBand3 function when custom RFI Band is used.

Integer32

Constraints:
range: 0-2560

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.25

accessSwitchVdslRFIBand3High

Configured high of RFIBand3 function when custom RFI Band is used.

Integer32

Constraints:
range: 0-2560

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.26

accessSwitchVdslRFIBand4Low

Configured low of RFIBand4 function when custom RFI Band is used.

Integer32

Constraints:
range: 0-2560

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.27

accessSwitchVdslRFIBand4High

Configured high of RFIBand4 function when custom RFI Band is used.

Integer32

Constraints:
range: 0-2560

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.28

accessSwitchVdslConfCompatibleMode

Set compatible mode to TCM-ISDN(0) or ADSL(1).

Enumeration

Enumerated Values:

0	tcm_isdn
1	adsl

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.29

accessSwitchVdslPowerCutback

Configured Power Cut Back. It is not supported in VES. Will be fixed at 0.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.30

accessSwitchVdslVtuoQamTable

table

.1.3.6.1.4.1.890.1.5.12.1.1.2.2.1 · 1 row entry · 3 columns

Open in standard view

This table provides one row for each VTU-O if QAM is used.
Each row contains the modulation parameters for that VTU-O.

accessSwitchVdslVtuoQamEntry entry .1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1

An entry in the accessSwitchVdslVtuoQamTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslVtuoQamConstellation Modulation method used by this VTU.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1.1`
accessSwitchVdslVtuoQamInterpolation Modulation speed used by this VTU.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1.2`
accessSwitchVdslVtuoQamFc Carrier frequency in Hz used by this ATU.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1.3`

accessSwitchVdslVturQamTable

table

.1.3.6.1.4.1.890.1.5.12.1.1.2.2.2 · 1 row entry · 3 columns

Open in standard view

This table provides one row for each VTU-R if QAM is used.
Each row contains the modulation parameters for that VTU-R.

accessSwitchVdslVturQamEntry entry .1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1

An entry in the accessSwitchVdslVturQamTable.

Indexes

ifIndex

Column	Syntax	OID
accessSwitchVdslVturQamConstellation Modulation method used by this VTU.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1.1`
accessSwitchVdslVturQamInterpolation Modulation speed used by this VTU.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1.2`
accessSwitchVdslVturQamFc Carrier frequency in Hz used by this ATU.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1.3`