accessSwitchVdslLineConfProfileRowStatus

ZYXELVDSL · .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.11
MIB view Table view

Object

column r/w SNMPv2-TCRowStatus 
This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to
`active'.  When `active' is set, the system
will validate the profile.
              
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated lines.
              
If the implementator of this MIB has chosen not
to implement `dynamic assignment' of profiles, this
object's MIN-ACCESS is read-only and its value
is always to be `active'.

Context

MIB
ZYXELVDSL
OID
.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.11
Type
column
Access
readwrite
Status
current
Parent
accessSwitchVdslLineConfProfileEntry
Table
accessSwitchVdslLineConfProfileTable
Siblings
27

Syntax

SNMPv2-TCRowStatus
Source
SNMPv2-TCRowStatus
Base type
Enumeration

Values & Constraints

Type Values
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
accessSwitchVdslLineConfProfileName
This object is used by the line configuration table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user spec…
columnOctetString.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.1
accessSwitchVdslVturConfMinSnrMgn
Configured Minimum acceptable Signal/Noise Margin in 0.01dB. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not pos…
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.10
accessSwitchVdslVtuoConfInterleaveMaxLineRate
Configured Maximum Transmit payload rate for `Interleave' channels, in bps.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.14
accessSwitchVdslVtuoConfInterleaveMinLineRate
Configured Minimum Transmit payload rate for `Interleave' channels, in bps.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.15
accessSwitchVdslVtuoConfMaxInterleaveDelay
Configured max. interleave delay of downstream. This value is in units of 0.5 ms.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.16
accessSwitchVdslVturConfInterleaveMaxLineRate
Configured Minimum Transmit payload rate for `Interleave' channels, in bps.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.17
accessSwitchVdslVturConfInterleaveMinLineRate
Configured Minimum Transmit payload rate for `Interleave' channels, in bps.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.18
accessSwitchVdslVturConfMaxInterleaveDelay
Configured max. interleave delay of downstream. This value is in units of 0.5 ms.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.19
accessSwitchVdslLineConfMode
Specifies the VDSL mode type used on this line.
columnEnumeration.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.2
accessSwitchVdslConfRFI
Set RFI Band function as disabled, standard or custom.
columnEnumeration.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.20
accessSwitchVdslRFIBand1Low
Configured low of RFIBand1 function when custom RFI Band is used.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.21
accessSwitchVdslRFIBand1High
onfigured high of RFIBand1 function when custom RFI Band is used.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.22
accessSwitchVdslRFIBand2Low
Configured low of RFIBand2 function when custom RFI Band is used.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.23
accessSwitchVdslRFIBand2High
Configured high of RFIBand2 function when custom RFI Band is used.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.24
accessSwitchVdslRFIBand3Low
Configured low of RFIBand3 function when custom RFI Band is used.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.25
accessSwitchVdslRFIBand3High
Configured high of RFIBand3 function when custom RFI Band is used.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.26
accessSwitchVdslRFIBand4Low
Configured low of RFIBand4 function when custom RFI Band is used.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.27
accessSwitchVdslRFIBand4High
Configured high of RFIBand4 function when custom RFI Band is used.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.28
accessSwitchVdslConfCompatibleMode
Set compatible mode to TCM-ISDN(0) or ADSL(1).
columnEnumeration.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.29
accessSwitchVdslVtuoConfRate
Transmission rate in bits-per-second specified by this VTU.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.3
accessSwitchVdslPowerCutback
Configured Power Cut Back. It is not supported in VES. Will be fixed at 0.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.30
accessSwitchVdslVtuoConfTargetSnrMgn
Configured Target Signal/Noise Margin in 0.01dB. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.4
accessSwitchVdslVtuoConfMaxSnrMgn
Configured Maximum acceptable Signal/Noise Margin in 0.01dB. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.5
accessSwitchVdslVtuoConfMinSnrMgn
Configured Minimum acceptable Signal/Noise Margin in 0.01dB. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not pos…
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.6
accessSwitchVdslVturConfRate
Transmission rate in bits-per-second specified by this VTU.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.7
accessSwitchVdslVturConfTargetSnrMgn
Configured Target Signal/Noise Margin in 0.01dB. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.8
accessSwitchVdslVturConfMaxSnrMgn
Configured Maximum acceptable Signal/Noise Margin in 0.01dB. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
columnInteger32.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.9