accessSwitchVdslPowerCutback
ZYXELVDSL ·
.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.30
Object
column
Integer32
Configured Power Cut Back. It is not supported in VES. Will be fixed at 0.
Context
- MIB
- ZYXELVDSL
- OID
.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.30- Type
- column
- Access
- readonly
- Status
- current
- Parent
- accessSwitchVdslLineConfProfileEntry
- Table
- accessSwitchVdslLineConfProfileTable
- Siblings
- 27
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| accessSwitchVdslLineConfProfileName This object is used by the line configuration table
in order to identify a row of this table.
When `dynamic' profiles are implemented, the profile
name is user spec… | column | OctetString | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.1 |
| accessSwitchVdslVturConfMinSnrMgn Configured Minimum acceptable Signal/Noise Margin in 0.01dB.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not pos… | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.10 |
| accessSwitchVdslLineConfProfileRowStatus This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to
`active'. When `active' is set, the syste… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.11 |
| accessSwitchVdslVtuoConfInterleaveMaxLineRate Configured Maximum Transmit payload rate for `Interleave' channels, in bps. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.14 |
| accessSwitchVdslVtuoConfInterleaveMinLineRate Configured Minimum Transmit payload rate for `Interleave' channels, in bps. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.15 |
| accessSwitchVdslVtuoConfMaxInterleaveDelay Configured max. interleave delay of downstream.
This value is in units of 0.5 ms. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.16 |
| accessSwitchVdslVturConfInterleaveMaxLineRate Configured Minimum Transmit payload rate for `Interleave' channels, in bps. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.17 |
| accessSwitchVdslVturConfInterleaveMinLineRate Configured Minimum Transmit payload rate for `Interleave' channels, in bps. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.18 |
| accessSwitchVdslVturConfMaxInterleaveDelay Configured max. interleave delay of downstream.
This value is in units of 0.5 ms. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.19 |
| accessSwitchVdslLineConfMode Specifies the VDSL mode type used on this line. | column | Enumeration | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.2 |
| accessSwitchVdslConfRFI Set RFI Band function as disabled, standard or custom. | column | Enumeration | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.20 |
| accessSwitchVdslRFIBand1Low Configured low of RFIBand1 function when custom RFI Band is used. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.21 |
| accessSwitchVdslRFIBand1High onfigured high of RFIBand1 function when custom RFI Band is used. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.22 |
| accessSwitchVdslRFIBand2Low Configured low of RFIBand2 function when custom RFI Band is used. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.23 |
| accessSwitchVdslRFIBand2High Configured high of RFIBand2 function when custom RFI Band is used. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.24 |
| accessSwitchVdslRFIBand3Low Configured low of RFIBand3 function when custom RFI Band is used. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.25 |
| accessSwitchVdslRFIBand3High Configured high of RFIBand3 function when custom RFI Band is used. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.26 |
| accessSwitchVdslRFIBand4Low Configured low of RFIBand4 function when custom RFI Band is used. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.27 |
| accessSwitchVdslRFIBand4High Configured high of RFIBand4 function when custom RFI Band is used. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.28 |
| accessSwitchVdslConfCompatibleMode Set compatible mode to TCM-ISDN(0) or ADSL(1). | column | Enumeration | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.29 |
| accessSwitchVdslVtuoConfRate Transmission rate in bits-per-second specified by this VTU. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.3 |
| accessSwitchVdslVtuoConfTargetSnrMgn Configured Target Signal/Noise Margin in 0.01dB.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.4 |
| accessSwitchVdslVtuoConfMaxSnrMgn Configured Maximum acceptable Signal/Noise Margin in 0.01dB.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.5 |
| accessSwitchVdslVtuoConfMinSnrMgn Configured Minimum acceptable Signal/Noise Margin in 0.01dB.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not pos… | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.6 |
| accessSwitchVdslVturConfRate Transmission rate in bits-per-second specified by this VTU. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.7 |
| accessSwitchVdslVturConfTargetSnrMgn Configured Target Signal/Noise Margin in 0.01dB.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.8 |
| accessSwitchVdslVturConfMaxSnrMgn Configured Maximum acceptable Signal/Noise Margin in 0.01dB.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.9 |