accessSwitchVdslVturCurrStatus

ZYXELVDSL · .1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.10

Object

column Integer32

Indicates mandatory state of the VTU-R line.  This is a
bit-map of possible conditions.  The various bit
positions are:
              
0      noDefect             There no defects on the line
              
1      lossOfFraming        VTU-R failure due to not
                     receiving valid frame.
              
2      lossOfSignal         VTU-R failure due to not
                     receiving signal.
              
3      lossOfPower          VTU-R failure due to loss of
                     power.
                     Note: the Agent may still
                     function.
              
4      lossOfSignalQuality  Loss of Signal Quality is
                     declared when the Noise Margin
                     falls below the Minimum Noise
                     Margin, or the bit-error-rate
                     exceeds 10^-7.
              
This is intended to supplement ifOperStatus.

Context

MIB: ZYXELVDSL
OID: .1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.10
Type: column
Access: readonly
Status: current
Parent: accessSwitchVdslVturPhysEntry
Table: accessSwitchVdslVturPhysTable
Siblings: 9

Syntax

Integer32

Source: COPS-PR-SPPIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
accessSwitchVdslVturCurrSnrMgn Noise Margin as seen by this VTU with respect to its received signal in 0.01dB.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.1`
accessSwitchVdslVturCurrMse Minimum Square Error as seen by this VTU with respect to its received signal in 0.01dB.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.2`
accessSwitchVdslVturCurrPsd Power Spectral Density as seen by this VTU with respect to its received signal in -0.01dBm/Hz.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.3`
accessSwitchVdslVturCurrRsErr Reed-Solomon error counted by this VTU with respect to its received signal.	column	RFC1155-SMICounter	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.4`
accessSwitchVdslVturCurrAtn Measured difference in the total power transmitted by the peer VTU and the total power received by this VTU.	column	RFC1155-SMIGauge	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.5`
accessSwitchVdslVturCurrOutputPwr Measured total output power in 0.01dBm transmitted by this VTU.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.6`
accessSwitchVdslVturCurrRate Actual transmission rate in bits-per-second on this line.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.7`
accessSwitchVdslVturChanCurrLineRate Actual transmit rate of upstream from VTUR. This value is in units of bps.	column	Integer32	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.8`
accessSwitchVdslVturCurrAttainableRate Indicates the maximum mandatoryly attainable data rate in bits-per-second by the VTU. This value will be equal or greater than the mandatory line rate.	column	RFC1155-SMIGauge	`.1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.9`