accessSwitchVdslVturPerfValidIntervals
ZYXELVDSL ·
.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.5
Object
column
Integer32
The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started within the last (<n>*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
Context
- MIB
- ZYXELVDSL
- OID
.1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- accessSwitchVdslVturPerfDataEntry
- Table
- accessSwitchVdslVturPerfDataTable
- Siblings
- 22
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-96
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| accessSwitchVdslVturPerfLofs Count of the number of Loss of Framing failures since
agent reset. | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.1 |
| accessSwitchVdslVturPerfCurr15MinLprs Count of seconds in the mandatory 15 minute interval
when there was Loss of Power. | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.10 |
| accessSwitchVdslVturPerfCurr15MinESs Count of Errored Seconds in the mandatory 15 minute
interval. The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more… | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.11 |
| accessSwitchVdslVturPerfCurr1DayTimeElapsed Number of seconds that have elapsed since the
beginning of the mandatory 1-day interval. | column | Unsigned32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.12 |
| accessSwitchVdslVturPerfCurr1DayLofs Count of the number of seconds when there was Loss of
Framing during the mandatory day as measured by
accessSwitchVdslVturPerfCurr1DayTimeElapsed. | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.13 |
| accessSwitchVdslVturPerfCurr1DayLoss Count of the number of seconds when there was Loss of
Signal during the mandatory day as measured by
accessSwitchVdslVturPerfCurr1DayTimeElapsed. | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.14 |
| accessSwitchVdslVturPerfCurr1DayLprs Count of the number of seconds when there was Loss of
Power during the mandatory day as measured by
accessSwitchVdslVturPerfCurr1DayTimeElapsed. | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.15 |
| accessSwitchVdslVturPerfCurr1DayESs Count of Errored Seconds during the mandatory day as
measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed.
The errored second parameter is a count of
one-second intervals conta… | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.16 |
| accessSwitchVdslVturPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval
over which the performance monitoring information
is actually counted. This value will be the same as
the interval duration excep… | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.17 |
| accessSwitchVdslVturPerfPrev1DayLofs Count of seconds in the interval when there was
Loss of Framing within the most recent previous
1-day period. | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.18 |
| accessSwitchVdslVturPerfPrev1DayLoss Count of seconds in the interval when there was
Loss of Signal within the most recent previous
1-day period. | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.19 |
| accessSwitchVdslVturPerfLoss Count of the number of Loss of Signal failures since
agent reset. | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.2 |
| accessSwitchVdslVturPerfPrev1DayLprs Count of seconds in the interval when there was
Loss of Power within the most recent previous
1-day period. | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.20 |
| accessSwitchVdslVturPerfPrev1DayESs Count of Errored Seconds within the most recent
previous 1-day period. The errored second parameter is
a count of one-second intervals containing one or more
crc anomalies, or one… | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.21 |
| accessSwitchVdslVturPerfBerr Count of the number of Over limited error seconds agent reset. | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.22 |
| accessSwitchVdslVturPerfBmin Count of the number of Under Min Margin since agent reset. | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.23 |
| accessSwitchVdslVturPerfLprs Count of the number of Loss of Power failures since
agent reset. | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.3 |
| accessSwitchVdslVturPerfESs Count of the number of Errored Seconds since agent
reset. The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los… | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.4 |
| accessSwitchVdslVturPerfInvalidIntervals The number of intervals in the range from
0 to the value of accessSwitchVdslVturPerfValidIntervals
for which no data is available. This object
will typically be zero except in cas… | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.6 |
| accessSwitchVdslVturPerfCurr15MinTimeElapsed Total elapsed seconds in this interval. | column | Unsigned32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.7 |
| accessSwitchVdslVturPerfCurr15MinLofs Count of seconds in the mandatory 15 minute interval
when there was Loss of Framing. | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.8 |
| accessSwitchVdslVturPerfCurr15MinLoss Count of seconds in the mandatory 15 minute interval
when there was Loss of Signal. | column | RFC1155-SMICounter | .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.9 |