accessSwitchVdslVturConfMinSnrMgn
ZYXELVDSL ·
.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.10
Object
column
Integer32
Configured Minimum acceptable Signal/Noise Margin in 0.01dB. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down.
Context
- MIB
- ZYXELVDSL
- OID
.1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- accessSwitchVdslLineConfProfileEntry
- Table
- accessSwitchVdslLineConfProfileTable
- Siblings
- 27
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| accessSwitchVdslLineConfProfileName This object is used by the line configuration table
in order to identify a row of this table.
When `dynamic' profiles are implemented, the profile
name is user spec… | column | OctetString | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.1 |
| accessSwitchVdslLineConfProfileRowStatus This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to
`active'. When `active' is set, the syste… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.11 |
| accessSwitchVdslVtuoConfInterleaveMaxLineRate Configured Maximum Transmit payload rate for `Interleave' channels, in bps. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.14 |
| accessSwitchVdslVtuoConfInterleaveMinLineRate Configured Minimum Transmit payload rate for `Interleave' channels, in bps. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.15 |
| accessSwitchVdslVtuoConfMaxInterleaveDelay Configured max. interleave delay of downstream.
This value is in units of 0.5 ms. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.16 |
| accessSwitchVdslVturConfInterleaveMaxLineRate Configured Minimum Transmit payload rate for `Interleave' channels, in bps. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.17 |
| accessSwitchVdslVturConfInterleaveMinLineRate Configured Minimum Transmit payload rate for `Interleave' channels, in bps. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.18 |
| accessSwitchVdslVturConfMaxInterleaveDelay Configured max. interleave delay of downstream.
This value is in units of 0.5 ms. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.19 |
| accessSwitchVdslLineConfMode Specifies the VDSL mode type used on this line. | column | Enumeration | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.2 |
| accessSwitchVdslConfRFI Set RFI Band function as disabled, standard or custom. | column | Enumeration | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.20 |
| accessSwitchVdslRFIBand1Low Configured low of RFIBand1 function when custom RFI Band is used. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.21 |
| accessSwitchVdslRFIBand1High onfigured high of RFIBand1 function when custom RFI Band is used. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.22 |
| accessSwitchVdslRFIBand2Low Configured low of RFIBand2 function when custom RFI Band is used. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.23 |
| accessSwitchVdslRFIBand2High Configured high of RFIBand2 function when custom RFI Band is used. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.24 |
| accessSwitchVdslRFIBand3Low Configured low of RFIBand3 function when custom RFI Band is used. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.25 |
| accessSwitchVdslRFIBand3High Configured high of RFIBand3 function when custom RFI Band is used. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.26 |
| accessSwitchVdslRFIBand4Low Configured low of RFIBand4 function when custom RFI Band is used. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.27 |
| accessSwitchVdslRFIBand4High Configured high of RFIBand4 function when custom RFI Band is used. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.28 |
| accessSwitchVdslConfCompatibleMode Set compatible mode to TCM-ISDN(0) or ADSL(1). | column | Enumeration | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.29 |
| accessSwitchVdslVtuoConfRate Transmission rate in bits-per-second specified by this VTU. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.3 |
| accessSwitchVdslPowerCutback Configured Power Cut Back. It is not supported in VES. Will be fixed at 0. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.30 |
| accessSwitchVdslVtuoConfTargetSnrMgn Configured Target Signal/Noise Margin in 0.01dB.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.4 |
| accessSwitchVdslVtuoConfMaxSnrMgn Configured Maximum acceptable Signal/Noise Margin in 0.01dB.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.5 |
| accessSwitchVdslVtuoConfMinSnrMgn Configured Minimum acceptable Signal/Noise Margin in 0.01dB.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not pos… | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.6 |
| accessSwitchVdslVturConfRate Transmission rate in bits-per-second specified by this VTU. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.7 |
| accessSwitchVdslVturConfTargetSnrMgn Configured Target Signal/Noise Margin in 0.01dB.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.8 |
| accessSwitchVdslVturConfMaxSnrMgn Configured Maximum acceptable Signal/Noise Margin in 0.01dB.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation. | column | Integer32 | .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.9 |