TN-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
122

tnPortTable

table
.1.3.6.1.4.1.7483.6.1.2.2.4.2 · 1 row entry · 65 columns
Open in standard view 
The port table has an entry for each port on each IOM card in each
chassis in the TMNX system.
tnPortEntry entry .1.3.6.1.4.1.7483.6.1.2.2.4.2.1
Each row entry represents a port on a IOM card in a chassis in the
system. Entries cannot be created and deleted via SNMP SET
operations. Before an IOM tmnxMDAEntry can be deleted from the
tmnxMDATable, its supported …
Indexes
tnPortPortID
Column Syntax OID
tnPortPortID
tnPortPortID is an index into this table. It maps this port to its
entry in the mib-2 interfaces table.
TN-TC-MIBTmnxPortID
Textual Convention: TN-TC-MIBTmnxPortID Integer32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.1
tnPortLastChangeTime
The tnPortLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
tnPortEntry row for this port.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.2
tnPortType
The type of port or optical pack installed.
TmnxPortType
Textual Convention: TmnxPortType Unsigned32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.3
tnPortClass
The class of port or optical pack installed. This can be
derived from tnPortType.
TmnxPortClass
Textual Convention: TmnxPortClass Enumeration
Type Values:
1none
2faste
3gige
4xgige
5sonet
6vport
7unused
8xcme
9tdm
10xlgige
11cgige
12xcmbar
13oduflex
14vsme
15tfgige
16cpri3
17cpri5
18cpri6
19cpri7
20cpri8
21cpri10
22obsai8
23obsai4
24cpri4
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.4
tnPortDescription
A textual string containing user supplied information about the
interface.
TN-TC-MIBTItemLongDescriptionr/w
Textual Convention: TN-TC-MIBTItemLongDescription OctetString
Type Constraints:
range: 0..160
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.5
tnPortName
The textual name of the interface. The value of this
object should be the name of the interface as assigned by
the local device and should be suitable for use in commands
entered at the device's `console'. This might …
TN-TC-MIBTNamedItemOrEmpty
Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.6
tnPortAlias
This object is an 'alias' name for the interface as
specified by a network manager, and provides a non-volatile
'handle' for the interface.

On the first instantiation of an interface, the value of
tnPortA…
TN-TC-MIBTNamedItemOrEmptyr/w
Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.7
tnPortUserAssignedMac
When tnPortUserAssignedMac has a value of 'true', the value of
tnPortMacAddress has been explicitly assigned by a SNMP SET
request. When tnPortUserAssignedMac is set to 'false',
tnPortMacAddress returns the system assi…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.8
tnPortMacAddress
When tnPortUserAssignedMac has a value of 'true',
tnPortMacAddress has the value that has been explicitly
assigned by a SNMP SET request. When tnPortUserAssignedMac
has a value of 'false', tnPortMacAddress returns the …
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.9
tnPortHwMacAddress
The interface's hardware or system assigned MAC address at its
protocol sub-layer. When tnPortUserAssignedMac has a value of
'true', the value of tnPortMacAddress is used instead of
tnPortHwMacAddress.

I…
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.10
tnPortMode
The tnPortMode variable indicates if the interface on this port
is configured as a service access port or a network access
port.

If the port mode equals 'access', and the tmnxMDAAssignedType
is of ATM MDA…
Enumerationr/w
Enumerated Values:
0undefined
1access
2network
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.11
tnPortEncapType
The type of encapsulation protocol configured on this
port's network interface. If tnPortEncapType has a value
of 'nullEncap', frames received will not carry any tags
or labels and as a result only one service can be
c…
Enumerationr/w
Enumerated Values:
0unknown
1nullEncap
2qEncap
3mplsEncap
4bcpNullEncap
5bcpDot1qEncap
6ipcpEncap
7frEncap
8pppAutoEncap
9atmEncap
10qinqEncap
11wanMirrorEncap
12ciscoHDLCEncap
13cemEncap
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.12
tnPortLagId
The value of tnPortLagId indicates which LAG or multi-link trunk
(MLT) this port is assigned to. If this port is not associated
with any LAG, this value will be set to zero(0).

The maximum value of this o…
Unsigned32r/w
Constraints:
range: 0-240
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.13
tnPortHoldTimeUp
The value of tnPortHoldTimeUp is used to configure the
hold-timer for link up event dampening. This guards against
reporting excessive interface transitions. This is implemented
by not advertising subsequent transitions…
Unsigned32r/w
Constraints:
range: 0-90000
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.14
tnPortHoldTimeDown
The value of tnPortHoldTimeDown is used to configure the
hold-timer for link down event dampening. This guards against
reporting excessive interface transitions. This is implemented
by not advertising subsequent transit…
Unsigned32r/w
Constraints:
range: 0-90000
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.15
tnPortUpProtocols
The tnPortUpProtocols variable is a bitmap that indicates what
protocols can be used on this port type.
Bits
Enumerated Values:
0portUpIpv4
1portUpMpls
2portUpBcp
3portUpIso
4portUpFr
5portUpAtm
6portUpChdlc
7portUpIma
8portUpIpv6
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.16
tnPortConnectorType
The type of connector installed on this port.
TmnxPortConnectorType
Textual Convention: TmnxPortConnectorType Unsigned32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.17
tnPortTransceiverType
Type of the transceiver.
Enumeration
Enumerated Values:
0unknown
1gbic
2moduleConnectorSolderedToMotherboard
3sfpTransceiver
4xbiTransceiver
5xenpakTransceiver
6xfpTransceiver
7xffTransceiver
8xfpeTransceiver
9xpakTransceiver
10x2Transceiver
11dwdmSfpTransceiver
12qsfpTransceiver
13qsfpPlusTransceiver
14cfpTransceiver
15shieldedMiniMultilaneHd4x
16shieldedMiniMultilaneHd8x
17qsfp28Transceiver
18cfp4Transceiver
19cdfpStyle1or2Transceiver
20shieldedMiniMultilaneHd4xFc
21shieldedMiniMultilaneHd8xFc
22cdfpStyle3Transceiver
23microQsfpTransceiver
24qsfpDd8xTransceiver
25osfp8xTransceiver
26sfpDd2xTransceiver
130tsopSmartSfpTransceiver
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.25
tnPortTransceiverLaserWaveLen
The light wavelength transmitted by the transceiver's laser.
A value of zero indicates that the port is not equipped with
the transceiver.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.27
tnPortTransceiverDiagCapable
Indicates if the transceiver is capable of doing diagnostics.
Enumeration
Enumerated Values:
0notApplicable
1true
2false
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.28
tnPortTransceiverModelNumber
The value of tnPortTransceiverModelNumber indicates the model
information for the transceiver, as read from the transceiver
EEPROM. For example, the string may contain the Nokia
part number and CLEI for the transceiver…
TN-TC-MIBTNamedItemOrEmpty
Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.29
tnPortSFPConnectorCode
The external connector provided on the interface.
Enumeration
Enumerated Values:
0unknown
1sc
2fiberChannel-Style1-CopperConnector
3fiberChannel-Style2-CopperConnector
4bncortnc
5fiberChannelCoaxialHeaders
6fiberJack
7lc
8mt-rj
9mu
10sg
11opticalPigtail
12mpo1x12
13mpo2x16
32hssdcII
33copperPigtail
34rj45
35noSeparableConnector
36mxc2x16
37csOptical
38miniCsOptical
128copperGigE
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.30
tnPortSFPVendorOUI
The vendor organizationally unique identifier field (OUI)
contains the IEEE company identifier for the vendor.
A value of all zero indicates that the vendor OUI
is unspecified.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.31
tnPortSFPVendorManufactureDate
The vendor's date code.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.32
tnPortSFPMedia
The media supported for the SFP.
Enumeration
Enumerated Values:
0notApplicable
1ethernet
2sonetsdh
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.33
tnPortSFPEquipped
Indicates if the SFP is equipped.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.34
tnPortEquipped
Indicates if there is an optics pack installed in this
port or not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.35
tnPortLinkStatus
Indicates whether or not the port has a physical link.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.36
tnPortAdminStatus
The desired administrative status of this port.
TmnxPortAdminStatusr/w
Textual Convention: TmnxPortAdminStatus Enumeration
Type Values:
1noop
2inService
3outOfService
4diagnose
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.37
tnPortOperStatus
The current operational status of this port.
TmnxPortOperStatus
Textual Convention: TmnxPortOperStatus Enumeration
Type Values:
1unknown
2inService
3outOfService
4diagnosing
5failed
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.38
tnPortState
The state level of this port. A value of 'none' indicates
the port is either in its initial creation state or is
just about to be deleted. A value of 'ghost' represents
a port that is not physically present. This sta…
TmnxPortState
Textual Convention: TmnxPortState Enumeration
Type Values:
1none
2ghost
3linkDown
4linkUp
5up
6diagnose
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.39
tnPortPrevState
The tnPortPrevState indicates the state level that the port
transitioned from into the current tnPortState level.
TmnxPortState
Textual Convention: TmnxPortState Enumeration
Type Values:
1none
2ghost
3linkDown
4linkUp
5up
6diagnose
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.40
tnPortNumAlarms
The number of alarms currently outstanding on this port.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.41
tnPortAlarmState
The value of tnPortAlarmState indicates the current alarm
state for this port.
TmnxAlarmState
Textual Convention: TmnxAlarmState Enumeration
Type Values:
0unknown
1alarmActive
2alarmCleared
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.42
tnPortLastAlarmEvent
The value of tnPortLastAlarmEvent indicates the object name
and instance value that points to the row entry in the ALARM-MIB
containing the most recent alarm associated with this port. If
tnPortAlarmState has a value o…
SNMPv2-TCRowPointer
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.43
tnPortClearAlarms
Setting this action variable causes all the alarms
associated with this port to be moved from the current
alarm log to the history alarm log. Primarily meant
for use in development. This object will most likely
be remo…
TN-TC-MIBTmnxActionTyper/w
Textual Convention: TN-TC-MIBTmnxActionType Enumeration
Type Values:
1doAction
2notApplicable
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.44
tnPortSFPVendorSerialNum
The value of tnPortSFPVendorSerialNum indicates the
transceiver's vendor serial number in ASCII characters,
as read from the transceiver EEPROM.

An empty string indicates the vendor serial number is
unspe…
TN-TC-MIBTNamedItemOrEmpty
Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.45
tnPortSFPVendorPartNum
The value of tnPortSFPVendorPartNum indicates the
transceiver's vendor part number (or product name) in ASCII
characters, as read from the transceiver EEPROM.

An empty string indicates the vendor part num…
TN-TC-MIBTNamedItemOrEmpty
Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.46
tnPortLastStateChanged
The tnPortLastStateChanged variable contains the
value of the sysUpTime the last time the operational status
of the port changed state.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.48
tnPortNumChannels
For SONET/SDH paths or TDM channels, tnPortNumChannels
contains the number of possible immediate children. For
leaf paths or channels, the value of this object will be zero.
For SONET/SDH or TDM physical ports, tnPortNu…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.49
tnPortNetworkEgrQueues
tnPortNetworkEgrQueues contains the network egress queue policy
if the tnPortMode is network. Otherwise this object has no
significance.
TN-TC-MIBTNamedItemOrEmptyr/w
Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.50
tnPortBundleNumber
tnPortBundleNumber identifies the bundle for which this port is
a member. If this port is not a member of any bundle, the value of
tnPortBundleNumber will be zero.
Integer32
Constraints:
range: 0-2000
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.51
tnPortIsLeaf
tnPortIsLeaf is applicable only when the 'isSonet' and/or 'isTDM'
bits in TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set.
When the value of this object is 'true', it indicates that the channel
is capable of passing tra…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.52
tnPortParentPortID
tnPortParentPortID is applicable only when the 'isSonet'
and/or 'isTDM' bits in TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set.
For SONET or TDM channel, it indicates the port ID of its parent
channel or port.
TN-TC-MIBTmnxPortID
Textual Convention: TN-TC-MIBTmnxPortID Integer32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.54
tnPortOpticalCompliance
tnPortOpticalCompliance is applicable only when the
tnPortSFPEquipped is set to 'true'. The value of
tnPortOpticalCompliance indicates the 8 bytes of optical compliance
bits stored in SFP and XFP eeproms.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.55
tnPortLoadBalanceAlgorithm
The value of tnPortLoadBalanceAlgorithm specifies the load
balancing algorithm to be used on this port. When the
value is 'includeL4', the src and dst port are used in the
hashing algorithm. When it's 'excludeL4', they …
Enumerationr/w
Enumerated Values:
0notApplicable
1default
2includeL4
3excludeL4
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.56
tnPortEgrPortSchedPlcy
The value of tnPortEgrPortSchedPlcy specifies the egress QoS
port-scheduler policy for this port. This object must correspond
to the index of a row in TIMETRA-QOS-MIB::tPortSchedulerPlcyTable.

A non-empty…
TN-TC-MIBTNamedItemOrEmptyr/w
Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.57
tnPortLastClearedTime
The value of tnPortLastClearedTime indicates the sysUpTime
when the counters in the IF-MIB:ifTable were last cleared.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.58
tnPortEgrHsmdaSchedPlcy
The value of tnPortEgrHsmdaSchedPlcy specifies the egress QoS
Hsmda-scheduler policy for this port. This object must correspond
to the index of a row in TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyTable,
otherwise an 'inconsist…
TN-TC-MIBTNamedItemOrEmptyr/w
Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.59
tnPortIngNamedPoolPlcy
The value of tnPortIngNamedPoolPlcy specifies a named pool
policy associated with an port ingress context. The policy
governs the way named pools are created at the port level.
TN-TC-MIBTNamedItemOrEmptyr/w
Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.60
tnPortEgrNamedPoolPlcy
The value of tnPortEgrNamedPoolPlcy specifies a named pool
policy associated with an port egress context. The policy
governs the way named pools are created at the port level.
TN-TC-MIBTNamedItemOrEmptyr/w
Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.61
tnPortIngPoolPercentRate
The value of tnPortIngPoolPercentRate specifies increment or
decrement of the active bandwidth associated with the ingress port.
This active bandwidth affects the amount of ingress buffer space
managed by the port.
Unsigned32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.62
tnPortEgrPoolPercentRate
The value of tnPortEgrPoolPercentRate specifies increment or
decrement of the active bandwidth associated with the egress port.
This active bandwidth affects the amount of egress buffer space
managed by the port.
Unsigned32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.63
tnPortDDMEventSuppression
The value of tnPortDDMEventSuppression specifies whether or not an
inserted SFP/XFP that supports Digital Diagnostic Monitoring
raises traps and events (false) or suppresses all notifications
(true).
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.64
tnPortSFPStatus
The value of tnPortSFPStatus indicates the operational status of
the inserted SFP/XFP. If tnPortSFPEquipped is false, the
tnPortSFPStatus will be 'not-equipped (0)', otherwise
'operational (1)' if no failure is detected…
Enumeration
Enumerated Values:
0not-equipped
1operational
2read-error
3data-corrupt
4ddm-corrupt
5unsupported
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.65
tnPortReasonDownFlags
The tnPortReasonDownFlags indicates why a port may
be in the operationally 'down' state. The following reasons are
detected through this object:
unknown(0) - Unspecified (or unknown)
linklos…
Bits
Enumerated Values:
0unknown
1linklossFwd
2lagMemberPortStandby
3ethCfmFault
4opticalTuning
5channelOutOfRange
6channelNotConfigured
7crcError
8internalMacTxError
9noServicePort
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.66
tnPortSSMRxQualityLevel
tnPortSSMRxQualityLevel indicates the SSM quality level
of received SSM messages. On ports not supporting SSM, or not
receiving SSM messages, the quality level will be 'unknown (0)'.

The values 'prs (1)' …
Enumeration
Enumerated Values:
0unknown
1prs
2stu
3st2
4tnc
5st3e
6st3
7smc
8st4
9dus
10prc
11ssua
12ssub
13sec
14dnu
15inv
16pno
17eec1
18eec2
19failed
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.67
tnPortDwdmLaserChannel
tnPortDwdmLaserChannel specifies the DWDM ITU channel at which a
tunable MDA optical interface will be configured to operate. It is
expressed in a form that is derived from the laser's operational
frequency. For example…
Unsigned32r/w
Constraints:
range: 170-610
range: 17-61
range: 0-0
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.68
tnPortOtuCapable
The value of tnPortOtuCapable indicates whether or not the physical
port supports the Optical Transport Unit (OTU) encapsulation.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.69
tnPortHoldTimeUnits
The value of tnPortHoldTimeUnits specifies the measurable units of
tnPortHoldTimeDown and tnPortHoldTimeUp.
Enumerationr/w
Enumerated Values:
0seconds
1centiseconds
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.70
tnPortLinkLengthInfo
The value of tnPortLinkLengthInfo indicates the link length info
stored in SFP and XFP EEPROMs.

tnPortLinkLengthInfo is applicable only when tnPortSFPEquipped is
'true'; otherwise, all 6 bytes will have a…
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.71
tnPortSFPNumLanes
The value of tnPortSFPNumLanes indicates the total number of lanes
supported by the CSFP/QSFP. If tnPortSFPEquipped is false, this
object will have a value of '0'.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.72
tnPortPhysStateChangeCount
The value of tnPortPhysStateChangeCount indicates the number of times
a physical port state has changed from 'linkDown (3)' to either
'linkUp (4)' or 'up (5)' and from either 'linkUp (4)' or 'up (5)' to
'linkDown (3)'. …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.73
tnPortPacketSwitchId
The value of tnPortPacketSwitchId indicates the packetswitch id that
this port belongs to. For PSS cards 11OPE8, 11QCE12X, 11QPE24,
which are not supported by packetswitch, the value returned will be
zero. If a packet…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.74
tnPortOtnSignalDegrade
The value of tnPortOtnSd specifies whether to enable or disable the
ODUk/OTUk (G.709) Signal Degrade defect to cause the port to be
operationally down. All consequent actions of a port operational down
status are applic…
TN-TC-MIBTmnxEnabledDisabledr/w
Textual Convention: TN-TC-MIBTmnxEnabledDisabled Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.75

tnPortTestTable

table
.1.3.6.1.4.1.7483.6.1.2.2.4.3 · 1 row entry · 8 columns
Open in standard view 
The tnPortTestTable has an entry for each port on each IOM
card in each chassis in the TMNX system.
tnPortTestEntry entry .1.3.6.1.4.1.7483.6.1.2.2.4.3.1
Each row entry represents a port on a IOM card in a
chassis in the system. Entries cannot be created and
deleted via SNMP SET operations.
Indexes
No indexes recorded
Column Syntax OID
tnPortTestState
The current testing status of this port.
Enumeration
Enumerated Values:
1notInTest
2inTest
 .1.3.6.1.4.1.7483.6.1.2.2.4.3.1.1
tnPortTestMode
The type of test to be executed on this port.
Enumerationr/w
Enumerated Values:
0notApplicable
1loopback1
2loopback2
3loopback3
4singalInsertion
 .1.3.6.1.4.1.7483.6.1.2.2.4.3.1.2
tnPortTestParameter
A parameter to be passed to the test program.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.2.4.3.1.3
tnPortTestLastResult
The status of the last test executed on this port.
Enumeration
Enumerated Values:
0notApplicable
1success
2failure
3timeout
 .1.3.6.1.4.1.7483.6.1.2.2.4.3.1.4
tnPortTestStartTime
The date and time the test started on this port.
Returns 0 if tnPortTestState is notInTest.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.7483.6.1.2.2.4.3.1.5
tnPortTestEndTime
The date and time the last test completed. Returns 0
if a test is in progress or no tests have yet to be run on
this port.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.7483.6.1.2.2.4.3.1.6
tnPortTestDuration
The number of seconds the port test is anticipated to last.
Integer32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.7483.6.1.2.2.4.3.1.7
tnPortTestAction
The operator sets this variable to perform the appropriate
type of testing.
Enumerationr/w
Enumerated Values:
1none
2startTest
3stopTest
 .1.3.6.1.4.1.7483.6.1.2.2.4.3.1.8

tnPortEtherTable

table
.1.3.6.1.4.1.7483.6.1.2.2.4.4 · 1 row entry · 34 columns
Open in standard view 
The tnPortEtherTable has an entry for each Ethernet
(faste, gige, xcme or xgige) port on each IOM card in each chassis
in the TMNX system.
tnPortEtherEntry entry .1.3.6.1.4.1.7483.6.1.2.2.4.4.1
Each row entry represents an Ethernet port on a IOM card in a
chassis in the system. Entries cannot be created and
deleted via SNMP SET operations. Before an IOM card entry
can be deleted from the tmnxMDATable, its su…
Indexes
tnPortPortID
Column Syntax OID
tnPortEtherMTU
The size of the largest packet which can be sent/received
on the Ethernet physical interface, specified in octets. For
interfaces that are used for transmitting network datagrams,
this is the size of the largest networ…
bytesUnsigned32r/w
Constraints:
range: 512-9612
range: 0-0
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.1
tnPortEtherDuplex
The tnPortEtherDuplex variable specifies the duplex mode used by
the Ethernet interface if tnPortEtherAutoNegotiate has a value of
'false' or 'limited'. If tnPortEtherAutoNegotiate has a value of
'true', the link parame…
Enumerationr/w
Enumerated Values:
0notApplicable
1fullDuplex
2halfDuplex
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.2
tnPortEtherSpeed
The tnPortEtherSpeed variable specifies the link speed of the
Ethernet interface if tnPortEtherAutoNegotiate has a value of
'false' or 'limited'. If tnPortEtherAutoNegotiate has a value of
'true', the link parameters a…
Enumerationr/w
Enumerated Values:
0notApplicable
1speed10
2speed100
3speed1000
4speed10000
5speed40000
6speed100000
7oduflex
8speed2457
9speed4915
10spped6114
11speed9830
12speed10137
13speed24330
14speed3072
15speed25000
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.3
tnPortEtherAutoNegotiate
When the value of tnPortEtherAutoNegotiate is 'true', the Ethernet
interface will automatically negotiate link parameters with the far
end (including speed and duplex), and will advertise all speeds and
duplex modes sup…
Enumerationr/w
Enumerated Values:
0notApplicable
1true
2false
3limited
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.4
tnPortEtherOperDuplex
The tnPortEtherOperDuplex variable indicates the operational duplex
mode of the Ethernet interface. A value of 'fullDuplex' indicates that
the link is in full duplex mode. A value of 'halfDuplex' indicates
that the lin…
Enumeration
Enumerated Values:
0notApplicable
1fullDuplex
2halfDuplex
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.5
tnPortEtherOperSpeed
The tnPortEtherOperSpeed variable indicates the operational speed
of the Ethernet interface in mega-bits per second (mbps). If the value of
tnPortEtherAutoNegotiate is 'true', the link autonegotiates the link
parameter…
mega-bits per secondSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.6
tnPortEtherAcctPolicyId
The value of the accounting policy must be defined prior to associating
the policy with the ethernet port. Accounting policies can only be
associated with network ports.
A non-zero value indicates the tmnxLogApPolicyId …
Unsigned32r/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.7
tnPortEtherCollectStats
Enable/disable the collection of accounting and statistical data
for the network ethernet port. When applying accounting policies the
data by default will be collected in the appropriate records and
written to the desig…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.8
tnPortEtherMDIMDIX
The tnPortEtherMDIMDIX variable indicates whether the Ethernet
interface is of type 'mdi' (Media Dependent Interface) or
'mdix' (Media Dependent Interface with crossover). If the agent
cannot identify the type of Ethern…
Enumeration
Enumerated Values:
0unknown
1mdi
2mdix
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.9
tnPortEtherXGigMode
The tnPortEtherXGigMode variable specifies whether the Ethernet
interface is in LAN or WAN mode. tnPortEtherXGigMode must be
'notApplicable' if tnPortClass is not 'xgige'.
Enumerationr/w
Enumerated Values:
0notApplicable
1lan
2wan
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.10
tnPortEtherEgressRate
The tnPortEtherEgressRate variable specifies the maximum egress
bandwidth (in kilobits per second) that the Ethernet interface
can generate. A value of -1 means that the limit is the actual
physical limit. If the provis…
Integer32r/w
Constraints:
range: 1-100000000
range: -1--1
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.11
tnPortEtherDot1qEtype
The tnPortEtherDot1qEtype variable indicates the ethertype expected
when the port's encapsulation type is dot1qEncap.
Unsigned32r/w
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.12
tnPortEtherQinqEtype
The tnPortEtherQinqEtype variable indicates the ethertype expected
when the port's encapsulation type is qinqEncap.
Unsigned32r/w
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.13
tnPortEtherIngressRate
The tnPortEtherIngressRate variable specifies the maximum ingress
bandwidth (in mega-bits per second) that the Ethernet interface
can receive. A value of -1 means that the limit is the actual
physical limit. If the prov…
mega-bits per secondInteger32r/w
Constraints:
range: -1--1
range: 1-10000
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.14
tnPortEtherReportAlarm
The value of tnPortEtherReportAlarm determines when and if to
generate tnEqPortEtherAlarm and tnEqPortEtherAlarmClear.
TmnxPortEtherReportStatusr/w
Textual Convention: TmnxPortEtherReportStatus Bits
Type Values:
0notUsed
1signalFailure
2remoteFault
3localFault
4noFrameLock
5highBer
6noBlockLock
7noAmLock
8duplicateLane
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.15
tnPortEtherReportAlarmStatus
The value of tnPortEtherReportAlarmStatus indicates the alarms on
this port.
TmnxPortEtherReportStatus
Textual Convention: TmnxPortEtherReportStatus Bits
Type Values:
0notUsed
1signalFailure
2remoteFault
3localFault
4noFrameLock
5highBer
6noBlockLock
7noAmLock
8duplicateLane
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.16
tnPortEtherPkts1519toMax
The total number of packets received that were longer than 1518 octets
but less than the maximum frame size for the particular medium, usually
12287 octets (excluding framing bits, but including FCS octets) and were
oth…
PacketsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.17
tnPortEtherHCOverPkts1519toMax
The number of times the associated tnPortEtherPkts1519toMax
counter has overflowed.
PacketsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.18
tnPortEtherHCPkts1519toMax
The total number of packets (including bad packets) received that were
between 1519 octets in length and the maximum frame size, usually 12287
octets inclusive (excluding framing bits but including FCS octets).
…
PacketsSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.19
tnPortEtherLacpTunnel
The value of tnPortEtherLacpTunnel specifies whether the LACP
packet tunneling for the ethernet port is enabled or disabled.
When tunneling is enabled, the port will not process any LACP
packets but will tunnel them thr…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.20
tnPortEtherDownWhenLoopedEnabled
The value of tnPortEtherDownWhenLoopedEnabled specifies whether
physical loop detection for the Ethernet port is enabled or
disabled. When enabled, the port will periodically send out
keep-alive PDUs with an EtherType …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.21
tnPortEtherDownWhenLoopedKeepAlive
The tnPortEtherDownWhenLoopedKeepAlive variable specifies the
number of seconds between each keep alive PDU transmission.
secondsUnsigned32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.22
tnPortEtherDownWhenLoopedRetry
The tnPortEtherDownWhenLoopedRetry variable specifies the minimum
number of seconds the port should wait after detecting a loop before
tnPortState can be set to 'up'. A value of 0 specifies the the
port should not set …
secondsUnsigned32r/w
Constraints:
range: 0-0
range: 10-160
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.23
tnPortEtherDownWhenLoopedState
The value of tnPortEtherDownWhenLoopedState indicates whether
a physical loop has been detected on the port or not. If
tnPortEtherDownWhenLoopedEnabled is set to 'false', this value
will be 'noLoopDetected'.
Enumeration
Enumerated Values:
1noLoopDetected
2loopDetected
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.24
tnPortEtherPBBEtype
The tnPortEtherPBBEtype variable indicates the Ethertype expected
for Provider Backbone Bridging Frames.
Unsigned32r/w
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.25
tnPortEtherSingleFiber
tnPortEtherSingleFiber is used to enable/disable packet gathering and
redirection of IP packets from a single fiber on RX port of the
Ethernet interface and redistribute packets to other interfaces
through either state …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.27
tnPortEtherSSM
tnPortEtherSSM specifies whether or not synchronous
status messages (SSM) are enabled on the ethernet port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.28
tnPortEtherDWLUseBroadcastAddr
tnPortEtherDWLUseBroadcastAddr specifies whether or not the
Down When Looped destination MAC address is the broadcast address,
'true (1)', or the local port mac address, as specified in
tnPortMacAddress, 'false (2)'.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.29
tnPortEtherSSMCodeType
The value of tnPortEtherSSMCodeType specifies the code-type
used by the Synchronous Status Message (SSM) channel.
Enumerationr/w
Enumerated Values:
1unknown
2sonet
3sdh
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.30
tnPortEtherSSMTxDus
The value of tnPortEtherSSMTxDus specifies whether or not the
value 0xF (dus/dnu) is forced in the Synchronous Status Message (SSM)
channel.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.31
tnPortEtherSSMRxEsmc
The value of tnPortEtherSSMRxEsmc indicates the SSM code received on
the Ethernet Synchronization Messaging Channel of the Ethernet port.

The value returned for this object is only meaningful if
tnPortEth…
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.32
tnPortEtherSSMTxQualityLevel
The value of tnPortEtherSSMTxQualityLevel indicates the quality
level transmitted in the Ethernet Synchronization Messaging Channel.
Enumeration
Enumerated Values:
0reserved0
1prs
2stu
3st2
4tnc
5st3e
6reserved6
7smc
8reserved8
9dus
10prc
11ssua
12ssub
13reserved13
14dnu
15reserved15
16pno
17eec1
18eec2
19reserved19
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.33
tnPortEtherQinqEtypelink
Ethertype profile ID which is referenced to tnCardEtherTypeProfileTable.
If tnPortEtherQinqEtypelink is zero, it indicates no associations.
If there is an association, tnPortEtherQinqEtype shall equal to tnCardEthertype…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.34
tnPortEtherOperEgressRate
The tnPortEtherOperEgressRate variable specifies the operational egress
bandwidth (in kilobits per second) that the Ethernet interface
generates. A value of -1 means that the limit is the actual
physical limit.
Integer32
Constraints:
range: -1--1
range: 1-100000000
 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.35

tnPacketSwitchPortTable

table
.1.3.6.1.4.1.7483.6.1.2.2.4.99 · 1 row entry · 1 columns
Open in standard view 
A table that can be used to find all the ports that belong to
packetswitch.
tnPacketSwitchPortEntry entry .1.3.6.1.4.1.7483.6.1.2.2.4.99.1
Entries represent ports withing a packetswitch
Indexes
TROPIC-SYSTEM-MIBtnSysSwitchId tnPortPortID
Column Syntax OID
tnPacketSwitchPortName
This is a duplication of tnPortName and is only used to
provide a mechanism for UI's to iterate through all
the ports in a packetswitch.

The textual name of the interface. The value of this
object should…
TN-TC-MIBTNamedItemOrEmpty
Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.2.4.99.1.1

tnEMACTable

table
.1.3.6.1.4.1.7483.6.1.2.2.4.100 · 1 row entry · 2 columns
Open in standard view 
A table that can be used to configure EMAC.
tnEMACEntry entry .1.3.6.1.4.1.7483.6.1.2.2.4.100.1
Entries for EMAC configuration
Indexes
TROPIC-SYSTEM-MIBtnSysSwitchId tnEMACID
Column Syntax OID
tnEMACID
tnEMACID is an index into this table. It maps this port to its
entry in the mib-2 interfaces table.
TN-TC-MIBTmnxPortID
Textual Convention: TN-TC-MIBTmnxPortID Integer32
 .1.3.6.1.4.1.7483.6.1.2.2.4.100.1.1
tnEMACAcctPolicyId
The value of the accounting policy must be defined prior to associating
the policy with the emac port. Accounting policies can only be
associated with network ports.
A non-zero value indicates the tmnxLogApPolicyId inde…
Unsigned32r/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.7483.6.1.2.2.4.100.1.2

tnPMACTable

table
.1.3.6.1.4.1.7483.6.1.2.2.4.101 · 1 row entry · 2 columns
Open in standard view 
A table that can be used to configure PMAC.
tnPMACEntry entry .1.3.6.1.4.1.7483.6.1.2.2.4.101.1
Entries for PMAC configuration
Indexes
TROPIC-SYSTEM-MIBtnSysSwitchId tnPMACID
Column Syntax OID
tnPMACID
tnPMACID is an index into this table. It maps this port to its
entry in the mib-2 interfaces table.
TN-TC-MIBTmnxPortID
Textual Convention: TN-TC-MIBTmnxPortID Integer32
 .1.3.6.1.4.1.7483.6.1.2.2.4.101.1.1
tnPMACAcctPolicyId
The value of the accounting policy must be defined prior to associating
the policy with the pmac port. Accounting policies can only be
associated with network ports.
A non-zero value indicates the tmnxLogApPolicyId inde…
Unsigned32r/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.7483.6.1.2.2.4.101.1.2

tnMMACTable

table
.1.3.6.1.4.1.7483.6.1.2.2.4.102 · 1 row entry · 2 columns
Open in standard view 
A table that can be used to configure PMAC.
tnMMACEntry entry .1.3.6.1.4.1.7483.6.1.2.2.4.102.1
Entries for MMAC configuration
Indexes
TROPIC-SYSTEM-MIBtnSysSwitchId tnMMACID
Column Syntax OID
tnMMACID
tnMMACID is an index into this table. It maps this port to its
entry in the mib-2 interfaces table.
TN-TC-MIBTmnxPortID
Textual Convention: TN-TC-MIBTmnxPortID Integer32
 .1.3.6.1.4.1.7483.6.1.2.2.4.102.1.1
tnMMACAcctPolicyId
The value of the accounting policy must be defined prior to associating
the policy with the mmac port. Accounting policies can only be
associated with network ports.
A non-zero value indicates the tmnxLogApPolicyId inde…
Unsigned32r/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.7483.6.1.2.2.4.102.1.2

tnQosPoolAppTable

table
.1.3.6.1.4.1.7483.6.1.2.2.10.2 · 1 row entry · 8 columns
Open in standard view 
This table maintains associations of the buffer pools with the
individual objects.
tnQosPoolAppEntry entry .1.3.6.1.4.1.7483.6.1.2.2.10.2.1
This entry maintains the specifics about the association of a
buffer pool and an object.
Indexes
tnObjectType tnObjectId tnObjectAppType tnObjectAppPool
Column Syntax OID
tnObjectType
The object tnObjectType defines the type of object to which the
pool is being setup for.
Enumeration
Enumerated Values:
1mda
2port
3channel
4bundle
51mpointQueues
 .1.3.6.1.4.1.7483.6.1.2.2.10.2.1.1
tnObjectId
tnObjectId is used to identify the specific object. If
tnObjectType is 'mda', then the tnObjectId is encoded as a
physical port with the port being '0'. For all other types the
encoding is done as per the description of…
TN-TC-MIBTmnxPortID
Textual Convention: TN-TC-MIBTmnxPortID Integer32
 .1.3.6.1.4.1.7483.6.1.2.2.10.2.1.2
tnObjectAppType
The object tnObjectAppType specifies the nature of usage the pool
would be used for. The pools could be used for access or network
traffic at either ingress or egress.

The value mpointQueues (51) is valid…
Enumeration
Enumerated Values:
1accessIngress
2accessEgress
3networkIngress
4networkEgress
51system
 .1.3.6.1.4.1.7483.6.1.2.2.10.2.1.3
tnObjectAppPool
tnObjectAppPool specifies the name of the pool to be used/created.
TN-TC-MIBTNamedItem
Textual Convention: TN-TC-MIBTNamedItem OctetString
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.7483.6.1.2.2.10.2.1.4
tnObjectAppPoolRowStatus
The object tnObjectAppPoolRowStatus is used to create or remove a
pool application to the object.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.7483.6.1.2.2.10.2.1.5
tnObjectAppResvCbs
The percentage of pool size reserved for CBS. The value '-1'
implies that the reserved CBS should be computed as the sum of
the CBS requested by the entities using this pool if the application
point is 'network'. For 'a…
Integer32r/w
Constraints:
range: -1-100
 .1.3.6.1.4.1.7483.6.1.2.2.10.2.1.6
tnObjectAppSlopePolicy
tnObjectAppSlopePolicy specifies the slope policy being used for
this pool. The Slope policies define the nature of the RED Slopes for
the high and the low priority traffic.
TN-TC-MIBTNamedItemr/w
Textual Convention: TN-TC-MIBTNamedItem OctetString
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.7483.6.1.2.2.10.2.1.7
tnObjectAppPoolSize
Size in percentage of buffer space. The value '-1' implies that
the pool size should be computed as per fair weighing between
all other pools.
Integer32r/w
Constraints:
range: -1-100
 .1.3.6.1.4.1.7483.6.1.2.2.10.2.1.8