SUPERMICRO-MISTDOSPFV3-MIB Table View

Information describing the parameters
of router's instances

fsMIStdOspfv3Entry row .1.3.6.1.4.1.10876.101.2.23.1.1.1

Information describing the parameters
of one of the router's instances

Indexes

fsMIStdOspfv3ContextId

Column	Syntax	OID
fsMIStdOspfv3ContextId A 32-bit unique context id for each entry. Minimum value is 0 and Maximum depends upon system configuration. Default value is 0 which will be initialized during bootup	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.23.1.1.1.1
fsMIStdOspfv3RouterId A 32-bit integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 interface addresses if IPv4 is configured on th…	OSPF-MIBRouterIDr/w	.1.3.6.1.4.1.10876.101.2.23.1.1.1.2
fsMIStdOspfv3AdminStat The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one inter- face; 'disabled' disables it on all inter- faces.	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.23.1.1.1.3
fsMIStdOspfv3VersionNumber The version number of OSPF for IPv6 is 3.	Enumeration Enumerated Values: 3 version3	.1.3.6.1.4.1.10876.101.2.23.1.1.1.4
fsMIStdOspfv3AreaBdrRtrStatus A flag to note whether this router is an area border router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.23.1.1.1.5
fsMIStdOspfv3ASBdrRtrStatus A flag to note whether this router is config- ured as an Autonomous System border router.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.23.1.1.1.6
fsMIStdOspfv3AsScopeLsaCount The number of AS-Scope (e.g. AS-External) link-state advertisements in the link-state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.1.1.7
fsMIStdOspfv3AsScopeLsaCksumSum The 32-bit unsigned sum of the LS checksums of the AS-scoped link-state advertisements con- tained in the link-state database. This sum can be used to determine if there has been a change in a router's link sta…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.1.1.8
fsMIStdOspfv3OriginateNewLsas The number of new link-state advertisements that have been originated. This number is in- cremented each time the router originates a new LSA.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.1.1.9
fsMIStdOspfv3RxNewLsas The number of link-state advertisements re- ceived determined to be new instantiations. This number does not include newer instantia- tions of self-originated link-state advertise- ments.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.1.1.10
fsMIStdOspfv3ExtLsaCount The number of External(LS type 0x4005) in the link- state database	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.1.1.11
fsMIStdOspfv3ExtAreaLsdbLimit The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-exter…	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.4.1.10876.101.2.23.1.1.1.12
fsMIStdOspfv3MulticastExtensions A Bit Mask indicating whether the router is forwarding IPv6 multicast datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. If intraAreaMulticast set, indicates that the ro…	Bitsr/w Enumerated Values: 0 intraAreaMulticast 1 interAreaMulticast 2 interAsMulticast	.1.3.6.1.4.1.10876.101.2.23.1.1.1.13
fsMIStdOspfv3ExitOverflowInterval The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-External-LSAs. When set to 0, the router wil…	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.1.1.14
fsMIStdOspfv3DemandExtensions The router's support for demand routing.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.23.1.1.1.15
fsMIStdOspfv3TrafficEngineeringSupport The router's support for traffic engineering extensions.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.23.1.1.1.16
fsMIStdOspfv3ReferenceBandwidth Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS)	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.1.1.17
fsMIStdOspfv3RestartSupport The router's support for OSPF hitless restart. Options include: no restart support, only planned restarts or both planned and unplanned restarts.	Enumerationr/w Enumerated Values: 1 none 2 plannedOnly 3 plannedAndUnplanned	.1.3.6.1.4.1.10876.101.2.23.1.1.1.18
fsMIStdOspfv3RestartInterval Configured OSPF hitless restart timeout interval.	secondsUpToRefreshIntervalr/w Type Constraints: range: 1..1800	.1.3.6.1.4.1.10876.101.2.23.1.1.1.19
fsMIStdOspfv3RestartStatus Current status of OSPF hitless restart.	Enumeration Enumerated Values: 1 notRestarting 2 plannedRestart 3 unplannedRestart	.1.3.6.1.4.1.10876.101.2.23.1.1.1.20
fsMIStdOspfv3RestartAge Remaining time in current OSPF hitless restart interval.	secondsUpToRefreshInterval Type Constraints: range: 1..1800	.1.3.6.1.4.1.10876.101.2.23.1.1.1.21
fsMIStdOspfv3RestartExitReason Describes the outcome of the last attempt at a hitless restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a restart attempt is currently underway.	Enumeration Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged	.1.3.6.1.4.1.10876.101.2.23.1.1.1.22
fsMIStdOspfv3Status This variable displays the status of the en- try. The internal effect (row removal) is implementation dependent.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.23.1.1.1.23

Information describing the configured  parame- 
ters  and cumulative statistics of the router's 
attached areas.

fsMIStdOspfv3AreaEntry row .1.3.6.1.4.1.10876.101.2.23.1.2.1

Information describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas.

Indexes

fsMIStdOspfv3ContextId fsMIStdOspfv3AreaId

Column	Syntax	OID
fsMIStdOspfv3AreaId A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPFv3 backbone.	OSPF-MIBAreaID	.1.3.6.1.4.1.10876.101.2.23.1.2.1.1
fsMIStdOspfv3ImportAsExtern Indicates whether an area is a Stub area, NSSA, or standard area. AS-scope LSAs are not imported into Stub Areas or NSSAs. NSSAs import AS-External data as Type-7 LSAs which have Area-scope	Enumerationr/w Enumerated Values: 1 importExternal 2 importNoExternal 3 importNssa	.1.3.6.1.4.1.10876.101.2.23.1.2.1.2
fsMIStdOspfv3AreaSpfRuns The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.2.1.3
fsMIStdOspfv3AreaBdrRtrCount The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.2.1.4
fsMIStdOspfv3AreaAsBdrRtrCount The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.2.1.5
fsMIStdOspfv3AreaScopeLsaCount The total number of Area-Scope link-state advertisements in this area's link-state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.2.1.6
fsMIStdOspfv3AreaScopeLsaCksumSum The 32-bit unsigned sum of the Area-Scope link-state advertisements' LS checksums contained in this area's link-state database. The sum can be used to determine if there has been a change in a router's link…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.2.1.7
fsMIStdOspfv3AreaSummary The variable ospfv3AreaSummary controls the im- port of Inter-Area LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate …	Enumerationr/w Enumerated Values: 1 noAreaSummary 2 sendAreaSummary	.1.3.6.1.4.1.10876.101.2.23.1.2.1.8
fsMIStdOspfv3StubMetric The metric value advertised for the default route into Stub and NSSA areas.	OSPF-MIBBigMetricr/w Type Constraints: range: 0..16777215	.1.3.6.1.4.1.10876.101.2.23.1.2.1.9
fsMIStdOspfv3AreaNssaTranslatorRole Indicates an NSSA Border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs.	Enumerationr/w Enumerated Values: 1 always 2 candidate	.1.3.6.1.4.1.10876.101.2.23.1.2.1.10
fsMIStdOspfv3AreaNssaTranslatorState Indicates if and how an NSSA Border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border router's ospfv3AreaNssTranslatorRole has been set to alw…	Enumeration Enumerated Values: 1 enabled 2 elected 3 disabled	.1.3.6.1.4.1.10876.101.2.23.1.2.1.11
fsMIStdOspfv3AreaNssaTranslatorStabilityInterval The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.2.1.12
fsMIStdOspfv3AreaNssaTranslatorEvents Indicates the number of Translator State changes that have occurred since the last boot-up.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.2.1.13
fsMIStdOspfv3AreaStubMetricType This variable displays the type of metric ad- vertised as a default route.	Enumerationr/w Enumerated Values: 1 ospfMetric 2 comparableCost 3 nonComparable	.1.3.6.1.4.1.10876.101.2.23.1.2.1.14
fsMIStdOspfv3AreaStatus This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6].	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.23.1.2.1.15

The OSPFv3 Process's AS-Scope Link State Database.

fsMIStdOspfv3AsLsdbEntry row .1.3.6.1.4.1.10876.101.2.23.1.3.1

A single AS-Scope Link State Advertisement.

Indexes

fsMIStdOspfv3ContextId fsMIStdOspfv3AsLsdbType fsMIStdOspfv3AsLsdbRouterId fsMIStdOspfv3AsLsdbLsid

Column	Syntax	OID
fsMIStdOspfv3AsLsdbType The type of the link state advertisement. Each link state type has a separate advertise- ment format. AS-Scope LSAs not recognized by the router may be stored in the database.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.10876.101.2.23.1.3.1.1
fsMIStdOspfv3AsLsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.10876.101.2.23.1.3.1.2
fsMIStdOspfv3AsLsdbLsid The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no ad…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.23.1.3.1.3
fsMIStdOspfv3AsLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence numb…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.3.1.4
fsMIStdOspfv3AsLsdbAge This field is the age of the link state adver- tisement in seconds.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.3.1.5
fsMIStdOspfv3AsLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the ch…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.3.1.6
fsMIStdOspfv3AsLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.2.23.1.3.1.7
fsMIStdOspfv3AsLsdbTypeKnown Is the LSA type recognized by this Router?	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.23.1.3.1.8

The OSPFv3 Process's Area-Scope Link State Database.

fsMIStdOspfv3AreaLsdbEntry row .1.3.6.1.4.1.10876.101.2.23.1.4.1

A single Area-Scope Link State Advertisement.

Indexes

fsMIStdOspfv3ContextId fsMIStdOspfv3AreaLsdbAreaId fsMIStdOspfv3AreaLsdbType fsMIStdOspfv3AreaLsdbRouterId fsMIStdOspfv3AreaLsdbLsid

Column	Syntax	OID
fsMIStdOspfv3AreaLsdbAreaId The 32 bit identifier of the Area from which the LSA was received.	OSPF-MIBAreaID	.1.3.6.1.4.1.10876.101.2.23.1.4.1.1
fsMIStdOspfv3AreaLsdbType The type of the link state advertisement. Each link state type has a separate advertise- ment format. Area-Scope LSAs unrecognized by the router are also stored in this database.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.10876.101.2.23.1.4.1.2
fsMIStdOspfv3AreaLsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.10876.101.2.23.1.4.1.3
fsMIStdOspfv3AreaLsdbLsid The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no ad…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.23.1.4.1.4
fsMIStdOspfv3AreaLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence numb…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.4.1.5
fsMIStdOspfv3AreaLsdbAge This field is the age of the link state adver- tisement in seconds.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.4.1.6
fsMIStdOspfv3AreaLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the ch…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.4.1.7
fsMIStdOspfv3AreaLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.2.23.1.4.1.8
fsMIStdOspfv3AreaLsdbTypeKnown Is the LSA type recognized by this Router?	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.23.1.4.1.9

The OSPFv3 Process's Link-Scope Link State Database.

fsMIStdOspfv3LinkLsdbEntry row .1.3.6.1.4.1.10876.101.2.23.1.5.1

A single Link-Scope Link State Advertisement.

Indexes

fsMIStdOspfv3LinkLsdbIfIndex fsMIStdOspfv3LinkLsdbType fsMIStdOspfv3LinkLsdbRouterId fsMIStdOspfv3LinkLsdbLsid

Column	Syntax	OID
fsMIStdOspfv3LinkLsdbIfIndex The identifier of the link from which the LSA was received.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.2.23.1.5.1.1
fsMIStdOspfv3LinkLsdbType The type of the link state advertisement. Each link state type has a separate advertise- ment format. Link-Scope LSAs unrecognized by the router are also stored in this database.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.10876.101.2.23.1.5.1.2
fsMIStdOspfv3LinkLsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.10876.101.2.23.1.5.1.3
fsMIStdOspfv3LinkLsdbLsid The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no ad…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.23.1.5.1.4
fsMIStdOspfv3LinkLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence numb…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.5.1.5
fsMIStdOspfv3LinkLsdbAge This field is the age of the link state advertisement in seconds.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.5.1.6
fsMIStdOspfv3LinkLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the ch…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.5.1.7
fsMIStdOspfv3LinkLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.2.23.1.5.1.8
fsMIStdOspfv3LinkLsdbTypeKnown Indicates whether the LSA type is recognized by this Router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.23.1.5.1.9
fsMIStdOspfv3LinkLsdbContextId A 32-bit unique context id for each entry. Minimum value is 0 and Maximum depends upon system configuration. Default value is 0 which will be initialized during bootup	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.5.1.10

The list of Hosts, and their metrics, that the 
router will advertise as host routes.

fsMIStdOspfv3HostEntry row .1.3.6.1.4.1.10876.101.2.23.1.6.1

A metric to be advertised when a given host is
reachable.

Indexes

fsMIStdOspfv3ContextId fsMIStdOspfv3HostAddressType fsMIStdOspfv3HostAddress

Column	Syntax	OID
fsMIStdOspfv3HostAddressType The address type of fsMIStdOspfv3HostAddress. Only IPv6 addresses without zone index are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.10876.101.2.23.1.6.1.1
fsMIStdOspfv3HostAddress The IPv6 Address of the Host. Must be a Global or Site-local address.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.10876.101.2.23.1.6.1.2
fsMIStdOspfv3HostMetric The Metric to be advertised.	OSPF-MIBMetricr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.10876.101.2.23.1.6.1.3
fsMIStdOspfv3HostAreaID The Area the Host Entry is to be found within. By default, the area that a subsuming OSPFv3 in- terface is in, or 0.0.0.0	OSPF-MIBAreaIDr/w	.1.3.6.1.4.1.10876.101.2.23.1.6.1.4
fsMIStdOspfv3HostStatus This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6].	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.23.1.6.1.5

The OSPFv3 Interface Table describes the  inter- 
faces from the viewpoint of OSPFv3.

fsMIStdOspfv3IfEntry row .1.3.6.1.4.1.10876.101.2.23.1.7.1

The OSPFv3 Interface Entry describes one inter-
face from the viewpoint of OSPFv3.

Indexes

fsMIStdOspfv3IfIndex

Column	Syntax	OID
fsMIStdOspfv3IfIndex The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.2.23.1.7.1.1
fsMIStdOspfv3IfAreaId A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPFv3 backbone.	OSPF-MIBAreaIDr/w	.1.3.6.1.4.1.10876.101.2.23.1.7.1.2
fsMIStdOspfv3IfType The OSPFv3 interface type.	Enumerationr/w Enumerated Values: 1 broadcast 2 nbma 3 pointToPoint 5 pointToMultipoint	.1.3.6.1.4.1.10876.101.2.23.1.7.1.3
fsMIStdOspfv3IfAdminStat The OSPFv3 interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is e…	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.23.1.7.1.4
fsMIStdOspfv3IfRtrPriority The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the desig…	OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.10876.101.2.23.1.7.1.5
fsMIStdOspfv3IfTransitDelay The estimated number of seconds it takes to transmit a link state update packet over this interface.	secondsUpToRefreshIntervalr/w Type Constraints: range: 1..1800	.1.3.6.1.4.1.10876.101.2.23.1.7.1.6
fsMIStdOspfv3IfRetransInterval The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state requ…	secondsUpToRefreshIntervalr/w Type Constraints: range: 1..1800	.1.3.6.1.4.1.10876.101.2.23.1.7.1.7
fsMIStdOspfv3IfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network.	secondsOSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.10876.101.2.23.1.7.1.8
fsMIStdOspfv3IfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same f…	secondsRouterDeadRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.10876.101.2.23.1.7.1.9
fsMIStdOspfv3IfPollInterval The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.7.1.10
fsMIStdOspfv3IfState The OSPFv3 Interface State.	Enumeration Enumerated Values: 1 down 2 loopback 3 waiting 4 pointToPoint 5 designatedRouter 6 backupDesignatedRouter 7 otherDesignatedRouter 8 standbyOnLink	.1.3.6.1.4.1.10876.101.2.23.1.7.1.11
fsMIStdOspfv3IfDesignatedRouter The Router ID of the Designated Router.	OSPF-MIBRouterID	.1.3.6.1.4.1.10876.101.2.23.1.7.1.12
fsMIStdOspfv3IfBackupDesignatedRouter The Router ID of the Backup Designated Router.	OSPF-MIBRouterID	.1.3.6.1.4.1.10876.101.2.23.1.7.1.13
fsMIStdOspfv3IfEvents The number of times this OSPF interface has changed its state, or an error has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.7.1.14
fsMIStdOspfv3IfMulticastForwarding The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point an…	Enumerationr/w Enumerated Values: 1 blocked 2 multicast 3 unicast	.1.3.6.1.4.1.10876.101.2.23.1.7.1.15
fsMIStdOspfv3IfDemand Indicates whether Demand OSPFv3 procedures (hel- lo suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be per- formed on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.23.1.7.1.16
fsMIStdOspfv3IfMetricValue The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by the fsMIStdOspfv3ReferenceBandwidth object.	OSPF-MIBMetricr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.10876.101.2.23.1.7.1.17
fsMIStdOspfv3IfLinkScopeLsaCount The total number of Link-Scope link-state advertisements in this link's link-state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.7.1.18
fsMIStdOspfv3IfLinkLsaCksumSum The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this link's link-state database. The sum can be used to determine if there has been a change in a router's link…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.7.1.19
fsMIStdOspfv3IfInstId Enables multiple instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance only.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.7.1.20
fsMIStdOspfv3IfDemandNbrProbe Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.23.1.7.1.21
fsMIStdOspfv3IfDemandNbrProbeRetxLimit The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.7.1.22
fsMIStdOspfv3IfDemandNbrProbeInterval Defines how often the neighbor will be probed.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.7.1.23
fsMIStdOspfv3IfContextId A 32-bit unique context id for each entry. Minimum value is 0 and Maximum depends upon system configuration. Default value is 0 which will be initialized during bootup	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.7.1.24
fsMIStdOspfv3IfStatus This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6].	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.23.1.7.1.25

Information about this router's virtual inter- 
faces.

fsMIStdOspfv3VirtIfEntry row .1.3.6.1.4.1.10876.101.2.23.1.8.1

Information about a single Virtual Interface.

Indexes

fsMIStdOspfv3ContextId fsMIStdOspfv3VirtIfAreaId fsMIStdOspfv3VirtIfNeighbor

Column	Syntax	OID
fsMIStdOspfv3VirtIfAreaId The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0	OSPF-MIBAreaID	.1.3.6.1.4.1.10876.101.2.23.1.8.1.1
fsMIStdOspfv3VirtIfNeighbor The Router ID of the Virtual Neighbor.	OSPF-MIBRouterID	.1.3.6.1.4.1.10876.101.2.23.1.8.1.2
fsMIStdOspfv3VirtIfIndex The interface ID assigned to this OSPFv3 virtual interface. It is advertised in Hello's sent over the virtal link and in the router's router-LSAs.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.2.23.1.8.1.3
fsMIStdOspfv3VirtIfTransitDelay The estimated number of seconds it takes to transmit a link- state update packet over this interface.	secondsUpToRefreshIntervalr/w Type Constraints: range: 1..1800	.1.3.6.1.4.1.10876.101.2.23.1.8.1.4
fsMIStdOspfv3VirtIfRetransInterval The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state r…	secondsUpToRefreshIntervalr/w Type Constraints: range: 1..1800	.1.3.6.1.4.1.10876.101.2.23.1.8.1.5
fsMIStdOspfv3VirtIfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor.	secondsOSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.10876.101.2.23.1.8.1.6
fsMIStdOspfv3VirtIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same f…	secondsRouterDeadRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.10876.101.2.23.1.8.1.7
fsMIStdOspfv3VirtIfState OSPF virtual interface states.	Enumeration Enumerated Values: 1 down 4 pointToPoint	.1.3.6.1.4.1.10876.101.2.23.1.8.1.8
fsMIStdOspfv3VirtIfEvents The number of state changes or error events on this Virtual Link	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.8.1.9
fsMIStdOspfv3VirtIfLinkScopeLsaCount The total number of Link-Scope link-state advertisements in this virtual link's link-state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.8.1.10
fsMIStdOspfv3VirtIfLinkLsaCksumSum The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this virtual link's link-state database. The sum can be used to determine if there has been a change in a route…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.8.1.11
fsMIStdOspfv3VirtIfStatus This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6].	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.23.1.8.1.12

A table of non-virtual neighbor information.

fsMIStdOspfv3NbrEntry row .1.3.6.1.4.1.10876.101.2.23.1.9.1

The information regarding a single neighbor.

Indexes

fsMIStdOspfv3NbrIfIndex fsMIStdOspfv3NbrRtrId

Column	Syntax	OID
fsMIStdOspfv3NbrIfIndex The local link ID of the link over which the neighbor can be reached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.2.23.1.9.1.1
fsMIStdOspfv3NbrRtrId A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.10876.101.2.23.1.9.1.2
fsMIStdOspfv3NbrAddressType The address type of fsMIStdOspfv3NbrAddress. Only IPv6 addresses without zone index are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.10876.101.2.23.1.9.1.3
fsMIStdOspfv3NbrAddress The IPv6 address of the neighbor associated with the local link.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.10876.101.2.23.1.9.1.4
fsMIStdOspfv3NbrOptions A Bit Mask corresponding to the neighbor's op- tions field.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.9.1.5
fsMIStdOspfv3NbrPriority The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network.	OSPF-MIBDesignatedRouterPriority Type Constraints: range: 0..255	.1.3.6.1.4.1.10876.101.2.23.1.9.1.6
fsMIStdOspfv3NbrState The State of the relationship with this Neigh- bor.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.10876.101.2.23.1.9.1.7
fsMIStdOspfv3NbrEvents The number of times this neighbor relationship has changed state, or an error has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.9.1.8
fsMIStdOspfv3NbrLsRetransQLen The current length of the retransmission queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.9.1.9
fsMIStdOspfv3NbrHelloSuppressed Indicates whether Hellos are being suppressed to the neighbor	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.23.1.9.1.10
fsMIStdOspfv3NbrIfId The interface ID that the neighbor advertises in its Hello Packets on this link, that is, the neighbor's local interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.2.23.1.9.1.11
fsMIStdOspfv3NbrRestartHelperStatus Indicates whether the router is acting as a hitless restart helper for the neighbor.	Enumeration Enumerated Values: 1 notHelping 2 helping	.1.3.6.1.4.1.10876.101.2.23.1.9.1.12
fsMIStdOspfv3NbrRestartHelperAge Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor.	secondsUpToRefreshInterval Type Constraints: range: 1..1800	.1.3.6.1.4.1.10876.101.2.23.1.9.1.13
fsMIStdOspfv3NbrRestartHelperExitReason Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor.	Enumeration Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged	.1.3.6.1.4.1.10876.101.2.23.1.9.1.14
fsMIStdOspfv3NbrContextId A 32-bit unique context id for each entry. Minimum value is 0 and Maximum depends upon system configuration. Default value is 0 which will be initialized during bootup	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.9.1.15

A table of configured non-virtual neighbor 
information and neighbors dynamically discovered 
by lower-level protocols such as Inverse Neighbor 
Discovery.

fsMIStdOspfv3NbmaNbrEntry row .1.3.6.1.4.1.10876.101.2.23.1.10.1

The information regarding a single configured
neighbor or neighbor discovered by lower-level
protocols such as Inverse Neighbor Discovery.

Indexes

fsMIStdOspfv3NbmaNbrIfIndex fsMIStdOspfv3NbmaNbrAddressType fsMIStdOspfv3NbmaNbrAddress

Column	Syntax	OID
fsMIStdOspfv3NbmaNbrIfIndex The local link ID of the link over which the neighbor can be reached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.2.23.1.10.1.1
fsMIStdOspfv3NbmaNbrAddressType The address type of fsMIStdOspfv3NbrAddress. Only IPv6 addresses without zone index are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.10876.101.2.23.1.10.1.2
fsMIStdOspfv3NbmaNbrAddress The IPv6 address of the neighbor associated with the local link.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.10876.101.2.23.1.10.1.3
fsMIStdOspfv3NbmaNbrPriority The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network.	OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.10876.101.2.23.1.10.1.4
fsMIStdOspfv3NbmaNbrRtrId A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. A value of 0.0.0.0 is returned until a Hello is received from the configured neighbor.	OSPF-MIBRouterID	.1.3.6.1.4.1.10876.101.2.23.1.10.1.5
fsMIStdOspfv3NbmaNbrState The State of the relationship with this Neigh- bor.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.10876.101.2.23.1.10.1.6
fsMIStdOspfv3NbmaNbrStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. Manually configured entries will have a storage type of nonVolat…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.10876.101.2.23.1.10.1.7
fsMIStdOspfv3NbmaNbrContextId A 32-bit unique context id for each entry. Minimum value is 0 and Maximum depends upon system configuration. Default value is 0 which will be initialized during bootup	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.10.1.8
fsMIStdOspfv3NbmaNbrStatus This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6].	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.23.1.10.1.9

A table of virtual neighbor information.

fsMIStdOspfv3VirtNbrEntry row .1.3.6.1.4.1.10876.101.2.23.1.11.1

Virtual neighbor information.

Indexes

fsMIStdOspfv3ContextId fsMIStdOspfv3VirtNbrArea fsMIStdOspfv3VirtNbrRtrId

Column	Syntax	OID
fsMIStdOspfv3VirtNbrArea The Transit Area Identifier.	OSPF-MIBAreaID	.1.3.6.1.4.1.10876.101.2.23.1.11.1.1
fsMIStdOspfv3VirtNbrRtrId A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.10876.101.2.23.1.11.1.2
fsMIStdOspfv3VirtNbrIfIndex The local interface ID for the virtual link over which the neighbor can be reached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.2.23.1.11.1.3
fsMIStdOspfv3VirtNbrAddressType The address type of fsMIStdOspfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.10876.101.2.23.1.11.1.4
fsMIStdOspfv3VirtNbrAddress The IPv6 address advertised by this Virtual Neighbor. It must be a Site-Local or Global scope address.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.10876.101.2.23.1.11.1.5
fsMIStdOspfv3VirtNbrOptions A Bit Mask corresponding to the neighbor's op- tions field.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.11.1.6
fsMIStdOspfv3VirtNbrState The state of the Virtual Neighbor Relation- ship.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.10876.101.2.23.1.11.1.7
fsMIStdOspfv3VirtNbrEvents The number of times this virtual link has changed its state, or an error has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.11.1.8
fsMIStdOspfv3VirtNbrLsRetransQLen The current length of the retransmission queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.23.1.11.1.9
fsMIStdOspfv3VirtNbrHelloSuppressed Indicates whether Hellos are being suppressed to the neighbor	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.23.1.11.1.10
fsMIStdOspfv3VirtNbrIfId The interface ID that the neighbor advertises in its Hello Packets on this virtual link, that is, the neighbor's local interface ID.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.2.23.1.11.1.11
fsMIStdOspfv3VirtNbrRestartHelperStatus Indicates whether the router is acting as a hitless restart helper for the neighbor.	Enumeration Enumerated Values: 1 notHelping 2 helping	.1.3.6.1.4.1.10876.101.2.23.1.11.1.12
fsMIStdOspfv3VirtNbrRestartHelperAge Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor.	secondsUpToRefreshInterval Type Constraints: range: 1..1800	.1.3.6.1.4.1.10876.101.2.23.1.11.1.13
fsMIStdOspfv3VirtNbrRestartHelperExitReason Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor.	Enumeration Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged	.1.3.6.1.4.1.10876.101.2.23.1.11.1.14

A range of IPv6 prefixes specified by a 
prefix/prefix length  pair. Note that if 
ranges are configured such that one range sub- 
sumes  another range the most specific match is 
the preferred one.

fsMIStdOspfv3AreaAggregateEntry row .1.3.6.1.4.1.10876.101.2.23.1.12.1

A range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range sub-
sumes another range the most specific match is
the preferred one.

Indexes

fsMIStdOspfv3ContextId fsMIStdOspfv3AreaAggregateAreaID fsMIStdOspfv3AreaAggregateAreaLsdbType fsMIStdOspfv3AreaAggregatePrefixType fsMIStdOspfv3AreaAggregatePrefix fsMIStdOspfv3AreaAggregatePrefixLength

Column	Syntax	OID
fsMIStdOspfv3AreaAggregateAreaID The Area the Address Aggregate is to be found within.	OSPF-MIBAreaID	.1.3.6.1.4.1.10876.101.2.23.1.12.1.1
fsMIStdOspfv3AreaAggregateAreaLsdbType The type of the Address Aggregate. This field specifies the Area Lsdb type that this Address Ag- gregate applies to.	Enumeration Enumerated Values: 8195 interAreaPrefixLsa 8199 nssaExternalLsa	.1.3.6.1.4.1.10876.101.2.23.1.12.1.2
fsMIStdOspfv3AreaAggregatePrefixType The prefix type of fsMIStdOspfv3AreaAggregatePrefix. Only IPv6 addresses are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.10876.101.2.23.1.12.1.4
fsMIStdOspfv3AreaAggregatePrefix The IPv6 Prefix.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.10876.101.2.23.1.12.1.5
fsMIStdOspfv3AreaAggregatePrefixLength The length of the prefix (in bits). A prefix can not be shorter than 3 bits.	bitsUnsigned32 Constraints: range: 3-128	.1.3.6.1.4.1.10876.101.2.23.1.12.1.6
fsMIStdOspfv3AreaAggregateEffect Prefixes subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the prefix not being advertised at all outside the area.	Enumerationr/w Enumerated Values: 1 advertiseMatching 2 doNotAdvertiseMatching	.1.3.6.1.4.1.10876.101.2.23.1.12.1.7
fsMIStdOspfv3AreaAggregateRouteTag This tag is advertised only in the summarized As-External LSA when summarizing from type-7 to type-5.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.23.1.12.1.8
fsMIStdOspfv3AreaAggregateStatus This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6].	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.23.1.12.1.9